rename CFG_ENV macros to CONFIG_ENV

[platform/kernel/u-boot.git] / include / configs / G2000.h

diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index df4ed39..81a12f1 100644 (file)
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -54,19 +54,19 @@
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=$(serverip):$(rootpath)\0"                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addip=setenv bootargs $(bootargs) "                            \
-               "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
-               ":$(hostname):$(netdev):off\0"                          \
-       "addmisc=setenv bootargs $(bootargs) "                          \
-               "console=ttyS0,$(baudrate) "                            \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off\0"                          \
+       "addmisc=setenv bootargs ${bootargs} "                          \
+               "console=ttyS0,${baudrate} "                            \
                "panic=1\0"                                             \
        "flash_nfs=run nfsargs addip addmisc;"                          \
-               "bootm $(kernel_addr)\0"                                \
+               "bootm ${kernel_addr}\0"                                \
        "flash_self=run ramargs addip addmisc;"                         \
-               "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
-       "net_nfs=tftp 200000 $(bootfile);"                              \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
+       "net_nfs=tftp 200000 ${bootfile};"                              \
                "run nfsargs addip addmisc;bootm\0"                     \
        "rootpath=/opt/eldk/ppc_4xx\0"                                  \
        "bootfile=/tftpboot/g2000/pImage\0"                             \
@@ -88,20 +88,32 @@
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 #endif
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_BSP     | \
-                               CFG_CMD_EEPROM  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -120,7 +132,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -164,6 +176,7 @@
 /* adding Ethernet setting:  FTS OUI 00:11:0B */
 /*----------------------------------------------------------------------------*/
 #define CONFIG_ETHADDR          00:11:0B:00:00:01
+#define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR         00:11:0B:00:00:02
 #define CONFIG_IPADDR          10.48.8.178
 #define CONFIG_IP1ADDR         10.48.8.188
@@ -286,16 +299,16 @@
  * Environment Variable setup
  */
 #if 1 /* test-only */
-#define CFG_ENV_IS_IN_EEPROM   1       /* use EEPROM for environment vars */
-#define CFG_ENV_OFFSET         0x100   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE           0x700   /* 2048 bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_EEPROM        1       /* use EEPROM for environment vars */
+#define CONFIG_ENV_OFFSET              0x100   /* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_SIZE                0x700   /* 2048 bytes may be used for env vars*/
                                   /* total size of a CAT24WC16 is 2048 bytes */
 
 #else  /* DEFAULT: environment in flash, using redundand flash sectors */
 
-#define CFG_ENV_IS_IN_FLASH    1       /* use FLASH for environment vars */
-#define CFG_ENV_ADDR           0xFFFA0000 /* environment starts before u-boot */
-#define CFG_ENV_SECT_SIZE      0x20000 /* 128k bytes may be used for env vars*/
+#define CONFIG_ENV_IS_IN_FLASH 1       /* use FLASH for environment vars */
+#define CONFIG_ENV_ADDR                0xFFFA0000 /* environment starts before u-boot */
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128k bytes may be used for env vars*/
 
 #endif
 
@@ -318,16 +331,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE                16384   /* For IBM 405 CPUs, older 405 ppc's    */
-                                       /* have only 8kB, 16kB is save here     */
-#define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
-#endif
-
-/*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
  */