Makefile: move all Power Architecture boards into boards.cfg

[platform/kernel/u-boot.git] / include / configs / CRAYL1.h

diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 527c846..77b6a15 100644 (file)
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -36,6 +36,13 @@
 
 #define CONFIG_405GP           1       /* This is a PPC405 CPU */
 #define CONFIG_4xx                 1   /* ...member of PPC405 family */
+
+/*
+ * Note: I make an "image" from U-Boot itself, which prefixes 0x40
+ * bytes of header info, hence start address is thus shifted.
+ */
+#define        CONFIG_SYS_TEXT_BASE    0xFFFD0040
+
 #define CONFIG_SYS_CLK_FREQ 25000000
 #define CONFIG_BAUDRATE                9600
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
@@ -45,6 +52,13 @@
 #define        CONFIG_PHY_ADDR         1       /* PHY address; handling of ENET */
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* early setup for 405gp */
 #define CONFIG_MISC_INIT_R     1       /* so that a misc_init_r() is called */
+#define CONFIG_NET_MULTI
+
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 
 /* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
  * keep possible initrd ramdisk decompression out.  This is in k (1024 bytes)
@@ -64,6 +78,7 @@
  #define CONFIG_ETHADDR          00:40:a6:80:14:5
  */
 #define CONFIG_HARD_I2C         1              /* hardware support for i2c */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SDRAM_BANK0             1
 #define CONFIG_SYS_I2C_SPEED               400000      /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE               0x7F
@@ -74,32 +89,32 @@
 #define        CONFIG_SYS_HZ                        1000       /* decrementer freq: 1 ms ticks */
 #define CONFIG_SYS_HUSH_PARSER                 1
 #define CONFIG_SYS_PROMPT_HUSH_PS2             "> "
-#define CONFIG_AUTOSCRIPT              1
+#define CONFIG_SOURCE                  1
 
 
 /*
  * Command line configuration.
  */
 
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_RUN
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
 
 
 /*
@@ -151,7 +166,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 #define CONFIG_SYS_FLASH_BASE          0xFFC00000
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 
 
 #define CONFIG_SYS_MONITOR_LEN         (192 * 1024)    /* Reserve 192 kB for Monitor   */