/*
- * (C) Copyright 2001-2003
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- 0 /* CFG_CMD_DATE */ )
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+/*
+ * Command line configuration.
*/
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
/*
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#if 1
-#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#endif
#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* Print Buffer Size
*/
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
#if defined(CONFIG_BOOT_ROM)
-#define CFG_FLASH_BASE 0xFF000000
+#define CFG_FLASH_BASE 0xFF000000
#else
-#define CFG_FLASH_BASE 0xFF800000
+#define CFG_FLASH_BASE 0xFF800000
#endif
-#define CFG_RESET_ADDRESS 0xFFF00100
+#define CFG_RESET_ADDRESS 0xFFF00100
-#define CFG_EUMB_ADDR 0xFCE00000
+#define CFG_EUMB_ADDR 0xFCE00000
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
-#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
- /* Maximum amount of RAM.
- */
-#define CFG_MAX_RAM_SIZE 0x10000000
+/* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x10000000
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
* Definitions for initial stack pointer and data area
*/
- /* Size in bytes reserved for initial data
- */
-#define CFG_GBL_DATA_SIZE 128
+/* Size in bytes reserved for initial data
+ */
+#define CFG_GBL_DATA_SIZE 128
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/*
* NS16550 Configuration
*/
-#define CFG_NS16550
+#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
-#define DUART_DCR (CFG_EUMB_ADDR + 0x4511)
+#define DUART_DCR (CFG_EUMB_ADDR + 0x4511)
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
/*
* Low Level Configuration Settings
* For the detail description refer to the MPC8240 user's manual.
*/
-#define CONFIG_SYS_CLK_FREQ 33000000
-#define CFG_HZ 1000
-/*
- * SDRAM Configuration Settings
- * Please note: currently only 64 and 128 MB SDRAM size supported
- * set CFG_SDRAM_SIZE to 64 or 128
- * Memory configuration using SPD information stored on the SODIMMs
- * not yet supported.
- */
-
-#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */
+#define CONFIG_SYS_CLK_FREQ 33000000
+#define CFG_HZ 1000
- /* Bit-field values for MCCR1.
- */
-#define CFG_ROMNAL 0
-#define CFG_ROMFAL 7
-#if (CFG_SDRAM_SIZE == 64) /* 64 MB */
-#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
-#elif (CFG_SDRAM_SIZE == 128) /* 128 MB */
-#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */
-#else
-# error "SDRAM size not supported"
-#endif
-#define CFG_BANK1_ROW 0
-#define CFG_BANK2_ROW 0
-#define CFG_BANK3_ROW 0
-#define CFG_BANK4_ROW 0
-#define CFG_BANK5_ROW 0
-#define CFG_BANK6_ROW 0
-#define CFG_BANK7_ROW 0
-
- /* Bit-field values for MCCR2.
- */
-#define CFG_REFINT 430 /* Refresh interval */
+/* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 0
+#define CFG_ROMFAL 8
+
+#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
+#define CFG_BANK1_ROW 0
+#define CFG_BANK2_ROW 0
+#define CFG_BANK3_ROW 0
+#define CFG_BANK4_ROW 0
+#define CFG_BANK5_ROW 0
+#define CFG_BANK6_ROW 0
+#define CFG_BANK7_ROW 0
+
+/* Bit-field values for MCCR2.
+ */
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CFG_BSTOPRE 192
+#define CFG_REFINT 0x2ec
- /* Bit-field values for MCCR3.
- */
-#define CFG_REFREC 2 /* Refresh to activate interval */
-#define CFG_RDLAT 3 /* Data latancy from read command */
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 160
- /* Bit-field values for MCCR4.
- */
-#define CFG_PRETOACT 2 /* Precharge to activate interval */
-#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
-#define CFG_ACTORW 2
+/* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+#define CFG_RDLAT 0 /* Data latancy from read command */
+
+/* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 2 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
+#define CFG_ACTORW 2
#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CFG_EXTROM 0
+#define CFG_REGDIMM 0
/* Memory bank settings.
* Only bits 20-29 are actually used from these vales to set the
* address. Refer to the MPC8240 book.
*/
-#define CFG_BANK0_START 0x00000000
-#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE 1
-#define CFG_BANK1_START 0x3ff00000
-#define CFG_BANK1_END 0x3fffffff
-#define CFG_BANK1_ENABLE 0
-#define CFG_BANK2_START 0x3ff00000
-#define CFG_BANK2_END 0x3fffffff
-#define CFG_BANK2_ENABLE 0
-#define CFG_BANK3_START 0x3ff00000
-#define CFG_BANK3_END 0x3fffffff
-#define CFG_BANK3_ENABLE 0
-#define CFG_BANK4_START 0x3ff00000
-#define CFG_BANK4_END 0x3fffffff
-#define CFG_BANK4_ENABLE 0
-#define CFG_BANK5_START 0x3ff00000
-#define CFG_BANK5_END 0x3fffffff
-#define CFG_BANK5_ENABLE 0
-#define CFG_BANK6_START 0x3ff00000
-#define CFG_BANK6_END 0x3fffffff
-#define CFG_BANK6_ENABLE 0
-#define CFG_BANK7_START 0x3ff00000
-#define CFG_BANK7_END 0x3fffffff
-#define CFG_BANK7_ENABLE 0
-
-#define CFG_ODCR 0xff
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7C0000)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7F8000)
#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */
#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
#define CFG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define SRAM_BASE 0x80000000 /* SRAM base address */
-#define SRAM_END 0x801FFFFF
+#define SRAM_BASE 0x80000000 /* SRAM base address */
+#define SRAM_END 0x801FFFFF
-/*---------------------------------------------------------------------*/
-/* CPC45 Memory Map */
-/*---------------------------------------------------------------------*/
-#define SRAM_BASE 0x80000000 /* SRAM base address */
-#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
-#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
-#define BCSR_BASE 0x80600000 /* board control / status registers */
-#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
-#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
-#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
+/*----------------------------------------------------------------------*/
+/* CPC45 Memory Map */
+/*----------------------------------------------------------------------*/
+#define SRAM_BASE 0x80000000 /* SRAM base address */
+#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
+#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
+#define BCSR_BASE 0x80600000 /* board control / status registers */
+#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
+#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */
+#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
/*---------------------------------------------------------------------*/
-/* CPC45 Control/Status Registers */
+/* CPC45 Control/Status Registers */
/*---------------------------------------------------------------------*/
-#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
-#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
-#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
-#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
-#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
-#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
-#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
-#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
-#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
-#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
+#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
+#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
+#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
+#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
+#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
+#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
+#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
+#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
+#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
+#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
/* IRQ_ENA_1 bit definitions */
-#define I_ENA_1_IERA 0x80 /* INTA enable */
-#define I_ENA_1_IERB 0x40 /* INTB enable */
-#define I_ENA_1_IERC 0x20 /* INTC enable */
-#define I_ENA_1_IERD 0x10 /* INTD enable */
+#define I_ENA_1_IERA 0x80 /* INTA enable */
+#define I_ENA_1_IERB 0x40 /* INTB enable */
+#define I_ENA_1_IERC 0x20 /* INTC enable */
+#define I_ENA_1_IERD 0x10 /* INTD enable */
/* IRQ_STAT_1 bit definitions */
-#define I_STAT_1_INTA 0x80 /* INTA status */
-#define I_STAT_1_INTB 0x40 /* INTB status */
-#define I_STAT_1_INTC 0x20 /* INTC status */
-#define I_STAT_1_INTD 0x10 /* INTD status */
+#define I_STAT_1_INTA 0x80 /* INTA status */
+#define I_STAT_1_INTB 0x40 /* INTB status */
+#define I_STAT_1_INTC 0x20 /* INTC status */
+#define I_STAT_1_INTD 0x10 /* INTD status */
/* IRQ_ENA_2 bit definitions */
-#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
-#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
-#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
-#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
-#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
-#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
-#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
-#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
+#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
+#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
+#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
+#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
+#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
+#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
+#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
+#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
/* IRQ_STAT_2 bit definitions */
-#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
-#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
-#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
-#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
-#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
-#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
-#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
-#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
+#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
+#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
+#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
+#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
+#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
+#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
+#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
+#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
/* BOARD_CTRL bit definitions */
-#define USER_LEDS 2 /* 2 user LEDs */
+#define USER_LEDS 2 /* 2 user LEDs */
#if (USER_LEDS == 4)
-#define B_CTRL_WRSE 0x80
-#define B_CTRL_KRSE 0x40
-#define B_CTRL_FWRE 0x20 /* Flash write enable */
-#define B_CTRL_FWPT 0x10 /* Flash write protect */
-#define B_CTRL_LED3 0x08 /* LED 3 control */
-#define B_CTRL_LED2 0x04 /* LED 2 control */
-#define B_CTRL_LED1 0x02 /* LED 1 control */
-#define B_CTRL_LED0 0x01 /* LED 0 control */
+#define B_CTRL_WRSE 0x80
+#define B_CTRL_KRSE 0x40
+#define B_CTRL_FWRE 0x20 /* Flash write enable */
+#define B_CTRL_FWPT 0x10 /* Flash write protect */
+#define B_CTRL_LED3 0x08 /* LED 3 control */
+#define B_CTRL_LED2 0x04 /* LED 2 control */
+#define B_CTRL_LED1 0x02 /* LED 1 control */
+#define B_CTRL_LED0 0x01 /* LED 0 control */
#else
-#define B_CTRL_WRSE 0x80
-#define B_CTRL_KRSE 0x40
-#define B_CTRL_FWRE_1 0x20 /* Flash write enable */
-#define B_CTRL_FWPT_1 0x10 /* Flash write protect */
-#define B_CTRL_LED1 0x08 /* LED 1 control */
-#define B_CTRL_LED0 0x04 /* LED 0 control */
-#define B_CTRL_FWRE_0 0x02 /* Flash write enable */
-#define B_CTRL_FWPT_0 0x01 /* Flash write protect */
+#define B_CTRL_WRSE 0x80
+#define B_CTRL_KRSE 0x40
+#define B_CTRL_FWRE_1 0x20 /* Flash write enable */
+#define B_CTRL_FWPT_1 0x10 /* Flash write protect */
+#define B_CTRL_LED1 0x08 /* LED 1 control */
+#define B_CTRL_LED0 0x04 /* LED 0 control */
+#define B_CTRL_FWRE_0 0x02 /* Flash write enable */
+#define B_CTRL_FWPT_0 0x01 /* Flash write protect */
#endif
/* BOARD_STAT bit definitions */
-#define B_STAT_WDGE 0x80
-#define B_STAT_WDGS 0x40
-#define B_STAT_WRST 0x20
-#define B_STAT_KRST 0x10
-#define B_STAT_CSW3 0x08 /* sitch bit 3 status */
-#define B_STAT_CSW2 0x04 /* sitch bit 2 status */
-#define B_STAT_CSW1 0x02 /* sitch bit 1 status */
-#define B_STAT_CSW0 0x01 /* sitch bit 0 status */
+#define B_STAT_WDGE 0x80
+#define B_STAT_WDGS 0x40
+#define B_STAT_WRST 0x20
+#define B_STAT_KRST 0x10
+#define B_STAT_CSW3 0x08 /* sitch bit 3 status */
+#define B_STAT_CSW2 0x04 /* sitch bit 2 status */
+#define B_STAT_CSW1 0x02 /* sitch bit 1 status */
+#define B_STAT_CSW0 0x01 /* sitch bit 0 status */
/*---------------------------------------------------------------------*/
-/* Display addresses */
+/* Display addresses */
/*---------------------------------------------------------------------*/
-#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
-#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
-#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
+#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
+#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
+#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
-#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
-#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
+#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
+#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
-#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
-#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
-#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
-#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
-#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
-#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
-#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
-#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
+#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
+#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
+#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
+#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
+#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
+#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
+#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
+#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
/*-----------------------------------------------------------------------
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP
+#undef CONFIG_PCI_PNP
+#undef CONFIG_PCI_SCAN_SHOW
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define PCI_ENET0_IOADDR 0x00104000
+#define PCI_ENET0_IOADDR 0x82000000
#define PCI_ENET0_MEMADDR 0x82000000
-#define PCI_PLX9030_MEMADDR 0x82100000
+#define PCI_PLX9030_IOADDR 0x82100000
+#define PCI_PLX9030_MEMADDR 0x82100000
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_I82365
+
+#define CFG_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE
+#define CFG_PCMCIA_MEM_SIZE 0x1000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_RESET /* reset for IDE not supported */
+#define CONFIG_IDE_LED /* LED for IDE is supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+#define CFG_ATA_DATA_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x400)
+
+#define CONFIG_DOS_PARTITION
+
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff