Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

[platform/kernel/u-boot.git] / include / configs / BSC9132QDS.h

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 1eb2ff6..dbd3724 100644 (file)
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -11,12 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_BSC9132QDS
-#define CONFIG_BSC9132
-#endif
-
 #define CONFIG_MISC_INIT_R
 
 #ifdef CONFIG_SDCARD
@@ -26,7 +20,6 @@
 #define CONFIG_SYS_TEXT_BASE           0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
-#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769     1
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_RAMBOOT
@@ -44,8 +37,6 @@
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
@@ -77,15 +68,12 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE                   /* BOOKE */
-#define CONFIG_E500                    /* BOOKE e500 family */
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_SYS_HAS_SERDES          /* common SERDES init code */
 
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
 #if defined(CONFIG_PCI)
-#define CONFIG_PCIE1                   /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
@@ -108,13 +96,10 @@
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xC0010000
 
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_TSEC_ENET /* ethernet */
 
@@ -139,7 +124,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x01ffffff
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_SYS_SPD_BUS_NUM         0
 #define SPD_EEPROM_ADDRESS1            0x54 /* I2C access */
 #define SPD_EEPROM_ADDRESS2            0x56 /* I2C access */
@@ -389,7 +373,6 @@ combinations. this should be removed later
 #define CONFIG_SYS_CS1_FTIM3           CONFIG_SYS_NAND_FTIM3
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 
 #define CONFIG_SYS_INIT_RAM_LOCK
@@ -413,8 +396,6 @@ combinations. this should be removed later
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
@@ -496,9 +477,7 @@ combinations. this should be removed later
 
 #endif /* CONFIG_TSEC_ENET */
 
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
@@ -509,7 +488,6 @@ combinations. this should be removed later
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
 #define CONFIG_HAS_FSL_DR_USB
 #endif
 
@@ -555,12 +533,9 @@ combinations. this should be removed later
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -614,14 +589,6 @@ combinations. this should be removed later
                        "8m(kernel),512k(dtb),-(fs)"
 #endif
 /*
- * Override partitions in device tree using info
- * in "mtdparts" environment variable
- */
-#ifdef CONFIG_CMD_MTDPARTS
-#define CONFIG_FDT_FIXUP_PARTITIONS
-#endif
-
-/*
  * Environment Configuration
  */
 
@@ -636,7 +603,6 @@ combinations. this should be removed later
 #define CONFIG_UBOOTPATH       "u-boot.bin"
 
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       10 /* -1 disable auto-boot */
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_DEF_HWCONFIG    "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
@@ -652,7 +618,7 @@ combinations. this should be removed later
        "consoledev=ttyS0\0"                            \
        "ramdiskaddr=2000000\0"                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
-       "fdtaddr=c00000\0"                              \
+       "fdtaddr=1e00000\0"                             \
        "fdtfile=bsc9132qds.dtb\0"              \
        "bdev=sda1\0"   \
        CONFIG_DEF_HWCONFIG\