Merge tag 'efi-2020-07-rc2-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

[platform/kernel/u-boot.git] / include / configs / BSC9131RDB.h

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index eadfa75..879173f 100644 (file)
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -16,19 +15,14 @@
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE           0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 
-#define CONFIG_SYS_TEXT_BASE           0x00201000
-#define CONFIG_SPL_TEXT_BASE           0xFFFFE000
 #define CONFIG_SPL_MAX_SIZE            8192
 #define CONFIG_SPL_RELOC_TEXT_BASE     0x00100000
 #define CONFIG_SPL_RELOC_STACK         0x00100000
@@ -36,7 +30,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST     (0x00200000 - CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0
-#define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifdef CONFIG_SPL_BUILD
@@ -47,7 +40,6 @@
 
 /* High Level Configuration Options */
 
-#define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DDR_CLK_FREQ    66666666 /* DDRCLK on 9131 RDB */
@@ -64,9 +56,6 @@
 #define CONFIG_L2_CACHE                        /* toggle L2 cache */
 #define CONFIG_BTB                     /* enable branch predition */
 
-#define CONFIG_SYS_MEMTEST_START       0x01000000      /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x01ffffff
-
 /* DDR Setup */
 #undef CONFIG_SYS_DDR_RAW_TIMING
 #undef CONFIG_DDR_SPD
@@ -181,7 +170,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
 #define CONFIG_SYS_NAND_DDR_LAW                11
@@ -207,7 +195,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc*/
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX      1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -233,14 +220,9 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 /* eSPI - Enhanced SPI */
-#ifdef CONFIG_FSL_ESPI
-#define CONFIG_SF_DEFAULT_SPEED                10000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#endif
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
@@ -259,45 +241,22 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_ETHPRIME                "eTSEC1"
 
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
-
 #endif /* CONFIG_TSEC_ENET */
 
 /*
  * Environment
  */
 #if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS     0
-#define CONFIG_ENV_SPI_CS      0
-#define CONFIG_ENV_SPI_MAX_HZ  10000000
-#define CONFIG_ENV_SPI_MODE    0
-#define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
-#define CONFIG_ENV_SECT_SIZE   0x10000
-#define CONFIG_ENV_SIZE                0x2000
-#elif defined(CONFIG_NAND)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET      ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
-#elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE                0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE           /* allow baudrate change */
 
 /*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-/*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 #if defined(CONFIG_CMD_KGDB)
@@ -305,9 +264,6 @@ extern unsigned long get_sdram_size(void);
 #else
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-                                               /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
@@ -331,11 +287,6 @@ extern unsigned long get_sdram_size(void);
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT "nand0=ff800000.flash,"
-#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
-                       "8m(kernel),512k(dtb),-(fs)"
 
 /*
  * Environment Configuration
@@ -345,7 +296,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_HAS_ETH0
 #endif
 
-#define CONFIG_HOSTNAME                BSC9131rdb
+#define CONFIG_HOSTNAME                "BSC9131rdb"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin" /* U-Boot image on TFTP server */