#ifndef __CONFIG_H
#define __CONFIG_H
-#include <asm/processor.h>
-
-#undef DEBUG
#define GTREGREAD(x) 0xffffffff /* needed for debug */
/*
#define CONFIG_BOOTCOMMAND \
"bootp 1000000; " \
"setenv bootargs root=ramfs console=ttyS00,9600 " \
- "ip=$(ipaddr):$(serverip):$(rootpath):$(gatewayip):" \
- "$(netmask):$(hostname):eth0:none; " \
+ "ip=${ipaddr}:${serverip}:${rootpath}:${gatewayip}:" \
+ "${netmask}:${hostname}:eth0:none; " \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 |\
- CFG_CMD_SCSI | CFG_CMD_IDE | CFG_CMD_DATE |\
- CFG_CMD_FDC | CFG_CMD_ELF)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_ELF
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CONFIG_CONS_INDEX 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV "nor"
+#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET 0x00000000
+
+/* mtdparts command line support
+ *
+ * Note: fake mtd_id used, no linux mtd map file
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=bab7xx-0"
+#define MTDPARTS_DEFAULT "mtdparts=bab7xx-0:-(jffs2)"
+*/
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */
/*
* Winbond Configuration
*/
-#define CFG_WINBOND_83C553 1 /* has a winbond bridge */
+#define CONFIG_WINBOND_83C553 1 /* has a winbond bridge */
#define CFG_USE_WINBOND_IDE 0 /* use winbond 83c553 internal ide */
#define CFG_WINBOND_ISA_CFG_ADDR 0x80005800 /* pci-isa bridge config addr */
#define CFG_WINBOND_IDE_CFG_ADDR 0x80005900 /* ide config addr */
/*
* NS87308 Configuration
*/
-#define CFG_NS87308 /* Nat Semi super-io cntr on ISA bus */
+#define CONFIG_NS87308 /* Nat Semi super-io cntr on ISA bus */
#define CFG_NS87308_BADDR_10 1
#define CFG_NS87308_DEVS (CFG_NS87308_UART1 | \
- CFG_NS87308_UART2 | \
- CFG_NS87308_KBC1 | \
- CFG_NS87308_MOUSE | \
- CFG_NS87308_FDC | \
- CFG_NS87308_RARP | \
- CFG_NS87308_GPIO | \
- CFG_NS87308_POWRMAN | \
- CFG_NS87308_RTC_APC )
+ CFG_NS87308_UART2 | \
+ CFG_NS87308_KBC1 | \
+ CFG_NS87308_MOUSE | \
+ CFG_NS87308_FDC | \
+ CFG_NS87308_RARP | \
+ CFG_NS87308_GPIO | \
+ CFG_NS87308_POWRMAN | \
+ CFG_NS87308_RTC_APC )
#define CFG_NS87308_PS2MOD
#define CFG_NS87308_GPIO_BASE 0x0220
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
*/
#undef CFG_L2
#define L2_INIT (L2CR_L2SIZ_HM | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
- L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
+ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#define L2_ENABLE (L2_INIT | L2CR_L2E)
#define CFG_L2_BAB7xx