Merge branch 'master' of git://git.denx.de/u-boot-arm

[platform/kernel/u-boot.git] / include / configs / ATUM8548.h

diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
index 2450adb..dda6baa 100644 (file)
--- a/include/configs/ATUM8548.h
+++ b/include/configs/ATUM8548.h
@@ -47,6 +47,10 @@
 #define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
 #define CONFIG_MPC8548         1       /* MPC8548 specific */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xfff80000
+#endif
+
 #define CONFIG_PCI             1       /* enable any pci type devices */
 #define CONFIG_PCI1            1       /* PCI controller 1 */
 #define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
@@ -67,8 +71,6 @@
  */
 #define CONFIG_L2_CACHE                        /* toggle L2 cache */
 #define CONFIG_BTB                     /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING          /* toggle addr streaming */
-#define CONFIG_CLEAR_LAW0              /* Clear LAW0 in cpu_init_r */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
@@ -93,9 +95,6 @@
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 
 #define PCI_SPEED              33333000        /* CPLD currenlty does not have PCI setup info */
-#define CONFIG_SYS_PCI1_ADDR   (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCI2_ADDR   (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE1_ADDR  (CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
@@ -178,7 +177,7 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    8000    /* Flash Write Timeout (ms) */
 
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #define CONFIG_FLASH_CFI_DRIVER    1
 #define CONFIG_SYS_FLASH_CFI           1
@@ -205,7 +204,6 @@
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -245,27 +243,27 @@
  */
 #define CONFIG_SYS_PCI_PHYS            0x80000000      /* 1G PCI TLB */
 
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS                0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BUS
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS        0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE        0x00100000      /* 1M */
 
 #ifdef CONFIG_PCI2
-#define CONFIG_SYS_PCI2_MEM_BASE       0xC0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS       CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_BUS                0xC0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS       CONFIG_SYS_PCI2_MEM_BUS
 #define CONFIG_SYS_PCI2_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI2_IO_PHYS        0xe2800000
 #define CONFIG_SYS_PCI2_IO_SIZE        0x00100000      /* 1M */
 #endif
 
 #ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_MEM_BASE      0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS      CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS       0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS      CONFIG_SYS_PCIE1_MEM_BUS
 #define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE       0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xe3000000
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00100000      /*   1M */
 #endif
@@ -287,11 +285,6 @@
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
-/* PCI view of System Memory */
-#define CONFIG_SYS_PCI_MEMORY_BUS      0x00000000
-#define CONFIG_SYS_PCI_MEMORY_PHYS     0x00000000
-#define CONFIG_SYS_PCI_MEMORY_SIZE     0x80000000
-
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
@@ -389,14 +382,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */