configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / 10m50_devboard.h

diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h
index 8a91cdb..04ce88c 100644 (file)
--- a/include/configs/10m50_devboard.h
+++ b/include/configs/10m50_devboard.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
  * Scott McNutt <smcnutt@psyent.com>
  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,59 +11,27 @@
 /*
  * BOARD/CPU
  */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * SERIAL
  */
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* Suppress console info */
 #define CONFIG_SYS_NS16550_MEM32
 
 /*
  * Flash
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      1024
-#define CONFIG_MTD_DEVICE
 
 /*
  * NET options
  */
 #define CONFIG_SYS_RX_ETH_BUFFER       0
-#define CONFIG_CMD_MII
-#define CONFIG_PHY_GIGE
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHY_MARVELL
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * FDT options
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_LMB
-
-/*
- * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
- * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
- * reset address, no? This will keep the environment in user region
- * of flash. NOTE: the monitor length must be multiple of sector size
- * (which is common practice).
- */
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_SIZE                        0x10000 /* 64k, 1 sector */
-#define CONFIG_ENV_OVERWRITE           /* Serial change Ok     */
-#define CONFIG_ENV_ADDR                        0xf4040000
 
 /*
  * MEMORY ORGANIZATION
@@ -74,30 +41,19 @@
  */
 #define CONFIG_SYS_SDRAM_BASE          0xc8000000
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_LEN         0x40000 /* Reserve 256k */
+#define CONFIG_SYS_MONITOR_LEN         0x80000 /* Reserve 512k */
 #define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_SDRAM_BASE + \
                                         CONFIG_SYS_SDRAM_SIZE - \
                                         CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN          0x20000
 
 /*
- * MISC
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
  */
-#define CONFIG_SYS_LONGHELP            /* Provide extended help */
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O buf size */
-#define CONFIG_SYS_MAXARGS             16      /* Max command args     */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Bootarg buf size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + \
-                                        16)    /* Print buf size */
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MONITOR_BASE - \
-                                        CONFIG_ENV_SIZE - \
-                                        CONFIG_SYS_MALLOC_LEN -        \
-                                        0x10000)
-#define CONFIG_CMDLINE_EDITING
+
 
 #endif /* __CONFIG_H */