#include <linux/stringify.h>
#include <asm/ptrace.h>
#include <stdarg.h>
+#include <linux/kernel.h>
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
#include <pci.h>
#endif
defined(CONFIG_MPC866) || \
defined(CONFIG_MPC866P)
# define CONFIG_MPC866_FAMILY 1
-#elif defined(CONFIG_MPC870) \
- || defined(CONFIG_MPC875) \
- || defined(CONFIG_MPC880) \
- || defined(CONFIG_MPC885)
+#elif defined(CONFIG_MPC885)
# define CONFIG_MPC885_FAMILY 1
#endif
#if defined(CONFIG_MPC860) \
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
-#ifdef CONFIG_HYMOD
-#include <board/hymod/hymod.h>
-#endif
-#ifdef CONFIG_ARM
-#define asmlinkage /* nothing */
-#endif
#ifdef CONFIG_BLACKFIN
#include <asm/blackfin.h>
#endif
#ifdef CONFIG_SOC_DA8XX
#include <asm/arch/hardware.h>
#endif
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch/immap_lsch3.h>
+#endif
+#ifdef CONFIG_FSL_LSCH2
+#include <asm/arch/immap_lsch2.h>
+#endif
#include <part.h>
#include <flash.h>
#include <image.h>
+/* Bring in printf format macros if inttypes.h is included */
+#define __STDC_FORMAT_MACROS
+
#ifdef __LP64__
#define CONFIG_SYS_SUPPORT_64BIT_DATA
#endif
#define _DEBUG 0
#endif
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
-#define debug_cond(cond, fmt, args...) \
- do { \
- if (cond) \
- printf(fmt, ##args); \
+#define debug_cond(cond, fmt, args...) \
+ do { \
+ if (cond) \
+ printf(pr_fmt(fmt), ##args); \
} while (0)
#define debug(fmt, args...) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
#define error(fmt, args...) do { \
- printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
+ printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
} while (0)
#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
#endif /* BUG */
-/* Force a compilation error if condition is true */
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-
typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
# endif
#endif
-/*
- * General Purpose Utilities
- */
-#define min(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x < __y) ? __x : __y; })
-
-#define max(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x > __y) ? __x : __y; })
-
-#define MIN(x, y) min(x, y)
-#define MAX(x, y) max(x, y)
-
-#define min3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x < __y ? (__x < __z ? __x : __z) : \
- (__y < __z ? __y : __z); })
-
-#define max3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x > __y ? (__x > __z ? __x : __z) : \
- (__y > __z ? __y : __z); })
-
-#define MIN3(x, y, z) min3(x, y, z)
-#define MAX3(x, y, z) max3(x, y, z)
-
-/*
- * Return the absolute value of a number.
- *
- * This handles unsigned and signed longs, ints, shorts and chars. For all
- * input types abs() returns a signed long.
- *
- * For 64-bit types, use abs64()
- */
-#define abs(x) ({ \
- long ret; \
- if (sizeof(x) == sizeof(long)) { \
- long __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } else { \
- int __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } \
- ret; \
- })
-
-#define abs64(x) ({ \
- s64 __x = (x); \
- (__x < 0) ? -__x : __x; \
- })
-
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
/*
* Function Prototypes
*/
+int dram_init(void);
void hang (void) __attribute__ ((noreturn));
/* */
phys_size_t initdram (int);
-int display_options (void);
-void print_size(unsigned long long, const char *);
-int print_buffer(ulong addr, const void *data, uint width, uint count,
- uint linelen);
+
+#include <display_options.h>
/* common/main.c */
void main_loop (void);
* @return 0 on success, or != 0 on error.
*/
int run_command_list(const char *cmd, int len, int flag);
-extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
-void board_init_f(ulong);
-void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
-int checkboard (void);
-int checkflash (void);
-int checkdram (void);
-int last_stage_init(void);
+void board_init_f(ulong);
+void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
+
+/**
+ * ulong board_init_f_alloc_reserve - allocate reserved area
+ *
+ * This function is called by each architecture very early in the start-up
+ * code to allow the C runtime to reserve space on the stack for writable
+ * 'globals' such as GD and the malloc arena.
+ *
+ * @top: top of the reserve area, growing down.
+ * @return: bottom of reserved area
+ */
+ulong board_init_f_alloc_reserve(ulong top);
+
+/**
+ * board_init_f_init_reserve - initialize the reserved area(s)
+ *
+ * This function is called once the C runtime has allocated the reserved
+ * area on the stack. It must initialize the GD at the base of that area.
+ *
+ * @base: top from which reservation was done
+ */
+void board_init_f_init_reserve(ulong base);
+
+/**
+ * arch_setup_gd() - Set up the global_data pointer
+ *
+ * This pointer is special in some architectures and cannot easily be assigned
+ * to. For example on x86 it is implemented by adding a specific record to its
+ * Global Descriptor Table! So we we provide a function to carry out this task.
+ * For most architectures this can simply be:
+ *
+ * gd = gd_ptr;
+ *
+ * @gd_ptr: Pointer to global data
+ */
+void arch_setup_gd(gd_t *gd_ptr);
+
+int checkboard(void);
+int show_board_info(void);
+int checkflash(void);
+int checkdram(void);
+int last_stage_init(void);
extern ulong monitor_flash_len;
int mac_read_from_eeprom(void);
extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
int arch_early_init_r(void);
/**
+ * arch_cpu_init_dm() - init CPU after driver model is available
+ *
+ * This is called immediately after driver model is available before
+ * relocation. This is similar to arch_cpu_init() but is able to reference
+ * devices
+ *
+ * @return 0 if OK, -ve on error
+ */
+int arch_cpu_init_dm(void);
+
+/**
+ * Reserve all necessary stacks
+ *
+ * This is used in generic board init sequence in common/board_f.c. Each
+ * architecture could provide this function to tailor the required stacks.
+ *
+ * On entry gd->start_addr_sp is pointing to the suggested top of the stack.
+ * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
+ * require only this can leave it untouched.
+ *
+ * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
+ * positions of the stack. The stack pointer(s) will be set to this later.
+ * gd->irq_sp is only required, if the architecture needs it.
+ *
+ * @return 0 if no error
+ */
+__weak int arch_reserve_stacks(void);
+
+/**
* Show the DRAM size in a board-specific way
*
* This is used by boards to display DRAM information in their own way.
*
* @param size Size of DRAM (which should be displayed along with other info)
*/
-void board_show_dram(ulong size);
+void board_show_dram(phys_size_t size);
/**
- * arch_fixup_memory_node() - Write arch-specific memory information to fdt
+ * arch_fixup_fdt() - Write arch-specific information to fdt
*
- * Defined in arch/$(ARCH)/lib/bootm.c
+ * Defined in arch/$(ARCH)/lib/bootm-fdt.c
*
* @blob: FDT blob to write to
* @return 0 if ok, or -ve FDT_ERR_... on failure
*/
-int arch_fixup_memory_node(void *blob);
+int arch_fixup_fdt(void *blob);
/* common/flash.c */
void flash_perror (int);
void pci_init (void);
void pci_init_board(void);
-void pciinfo (int, int);
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
int pci_pre_init (struct pci_controller *);
void fdc_hw_init (void);
/* $(BOARD)/eeprom.c */
-void eeprom_init (void);
-#ifndef CONFIG_SPI
-int eeprom_probe (unsigned dev_addr, unsigned offset);
-#endif
+void eeprom_init (int bus);
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
-#ifdef CONFIG_LWMON
-extern uchar pic_read (uchar reg);
-extern void pic_write (uchar reg, uchar val);
-#endif
/*
* Set this up regardless of board
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-#ifdef CONFIG_HERMES
-/* $(BOARD)/hermes.c */
-void hermes_start_lxt980 (int speed);
-#endif
-
-#ifdef CONFIG_EVB64260
-void evb64260_init(void);
-void debug_led(int, int);
-void display_mem_map(void);
-void perform_soft_reset(void);
-#endif
-
/* $(BOARD)/$(BOARD).c */
int board_early_init_f (void);
int board_late_init (void);
defined(CONFIG_8xx)
uint get_immr (uint);
#endif
-uint get_pir (void);
#if defined(CONFIG_MPC5xxx)
uint get_svr (void);
#endif
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
defined (CONFIG_MPC5xxx) || \
- defined (CONFIG_74xx_7xx) || \
- defined (CONFIG_74x) || \
- defined (CONFIG_75x) || \
- defined (CONFIG_74xx) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
iter++, cpu = cpumask_next(cpu, mask)) \
int cpu_numcores (void);
+int cpu_num_dspcores(void);
u32 cpu_mask (void);
+u32 cpu_dsp_mask(void);
int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
int checkdcache (void);
void upmconfig (unsigned int, unsigned int *, unsigned int);
ulong get_tbclk (void);
+void reset_misc (void);
void reset_cpu (ulong addr);
-#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
void ft_cpu_setup(void *blob, bd_t *bd);
-#ifdef CONFIG_PCI
void ft_pci_setup(void *blob, bd_t *bd);
-#endif
-#endif
void smp_set_core_boot_addr(unsigned long addr, int corenr);
void smp_kick_all_cpus(void);
int serial_stub_getc(struct stdio_dev *sdev);
int serial_stub_tstc(struct stdio_dev *sdev);
-void _serial_setbrg (const int);
-void _serial_putc (const char, const int);
-void _serial_putc_raw(const char, const int);
-void _serial_puts (const char *, const int);
-int _serial_getc (const int);
-int _serial_tstc (const int);
-
/* $(CPU)/speed.c */
int get_clocks (void);
int get_clocks_866 (void);
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
-# if defined(CONFIG_OF_LIBFDT)
- void ft_fixup_cpu(void *, u64);
- void ft_fixup_num_cores(void *);
-# endif
+void ft_fixup_cpu(void *, u64);
+void ft_fixup_num_cores(void *);
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
void invalidate_dcache_all(void);
void invalidate_icache_all(void);
+enum {
+ /* Disable caches (else flush caches but leave them active) */
+ CBL_DISABLE_CACHES = 1 << 0,
+ CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
+
+ CBL_ALL = 3,
+};
+
+/**
+ * Clean up ready for linux
+ *
+ * @param flags Flags to control what is done
+ */
+int cleanup_before_linux_select(int flags);
+
/* arch/$(ARCH)/lib/ticks.S */
-unsigned long long get_ticks(void);
+uint64_t get_ticks(void);
void wait_ticks (unsigned long);
/* arch/$(ARCH)/lib/time.c */
int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
int stoponerr, int offset);
+/**
+ * gzwrite progress indicators: defined weak to allow board-specific
+ * overrides:
+ *
+ * gzwrite_progress_init called on startup
+ * gzwrite_progress called during decompress/write loop
+ * gzwrite_progress_finish called at end of loop to
+ * indicate success (retcode=0) or failure
+ */
+void gzwrite_progress_init(u64 expected_size);
+
+void gzwrite_progress(int iteration,
+ u64 bytes_written,
+ u64 total_bytes);
+
+void gzwrite_progress_finish(int retcode,
+ u64 totalwritten,
+ u64 totalsize,
+ u32 expected_crc,
+ u32 calculated_crc);
+
+/**
+ * decompress and write gzipped image from memory to block device
+ *
+ * @param src compressed image address
+ * @param len compressed image length in bytes
+ * @param dev block device descriptor
+ * @param szwritebuf bytes per write (pad to erase size)
+ * @param startoffs offset in bytes of first write
+ * @param szexpected expected uncompressed length
+ * may be zero to use gzip trailer
+ * for files under 4GiB
+ */
+int gzwrite(unsigned char *src, int len,
+ struct blk_desc *dev,
+ unsigned long szwritebuf,
+ u64 startoffs,
+ u64 szexpected);
+
+/* lib/lz4_wrapper.c */
+int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
+
/* lib/qsort.c */
void qsort(void *base, size_t nmemb, size_t size,
int(*compar)(const void *, const void *));
unsigned int rand(void);
unsigned int rand_r(unsigned int *seedp);
-/* common/console.c */
-int console_init_f(void); /* Before relocation; uses the serial stuff */
-int console_init_r(void); /* After relocation; uses the console stuff */
-int console_assign(int file, const char *devname); /* Assign the console */
-int ctrlc (void);
-int had_ctrlc (void); /* have we had a Control-C since last clear? */
-void clear_ctrlc (void); /* clear the Control-C condition */
-int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
-int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */
/*
* STDIO based functions (can always be used)
*/
int tstc(void);
/* stdout */
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
+#define putc(...) do { } while (0)
+#define puts(...) do { } while (0)
+#define printf(...) do { } while (0)
+#define vprintf(...) do { } while (0)
+#else
void putc(const char c);
void puts(const char *s);
int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
int vprintf(const char *fmt, va_list args);
+#endif
/* stderr */
#define eputc(c) fputc(stderr, c)
/* lib/net_utils.c */
#include <net.h>
-static inline IPaddr_t getenv_IPaddr(char *var)
+static inline struct in_addr getenv_ip(char *var)
{
return string_to_ip(getenv(var));
}
-/*
- * CONSOLE multiplexing.
- */
-#ifdef CONFIG_CONSOLE_MUX
-#include <iomux.h>
-#endif
-
int pcmcia_init (void);
#ifdef CONFIG_STATUS_LED
int cpu_release(int nr, int argc, char * const argv[]);
#endif
-/* Define a null map_sysmem() if the architecture doesn't use it */
-# ifndef CONFIG_ARCH_MAP_SYSMEM
-static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
-{
- return (void *)(uintptr_t)paddr;
-}
-
-static inline void unmap_sysmem(const void *vaddr)
-{
-}
-
-static inline phys_addr_t map_to_sysmem(const void *ptr)
-{
- return (phys_addr_t)(uintptr_t)ptr;
-}
-# endif
-
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
-#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
-#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-
-/*
- * Divide positive or negative dividend by positive divisor and round
- * to closest integer. Result is undefined for negative divisors and
- * for negative dividends if the divisor variable type is unsigned.
- */
-#define DIV_ROUND_CLOSEST(x, divisor)( \
-{ \
- typeof(x) __x = x; \
- typeof(divisor) __d = divisor; \
- (((typeof(x))-1) > 0 || \
- ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
- (((__x) + ((__d) / 2)) / (__d)) : \
- (((__x) - ((__d) / 2)) / (__d)); \
-} \
-)
-
-#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
-#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
/*
- * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
- * is used to align DMA buffers.
- */
-#ifndef __ASSEMBLY__
-#include <asm/cache.h>
-#endif
-
-/*
- * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
- * stack that meets the minimum architecture alignment requirements for DMA.
- * Such a buffer is useful for DMA operations where flushing and invalidating
- * the cache before and after a read and/or write operation is required for
- * correct operations.
- *
- * When called the macro creates an array on the stack that is sized such
- * that:
- *
- * 1) The beginning of the array can be advanced enough to be aligned.
+ * check_member() - Check the offset of a structure member
*
- * 2) The size of the aligned portion of the array is a multiple of the minimum
- * architecture alignment required for DMA.
- *
- * 3) The aligned portion contains enough space for the original number of
- * elements requested.
- *
- * The macro then creates a pointer to the aligned portion of this array and
- * assigns to the pointer the address of the first element in the aligned
- * portion of the array.
- *
- * Calling the macro as:
- *
- * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
- *
- * Will result in something similar to saying:
- *
- * uint32_t buffer[1024];
- *
- * The following differences exist:
- *
- * 1) The resulting buffer is guaranteed to be aligned to the value of
- * ARCH_DMA_MINALIGN.
- *
- * 2) The buffer variable created by the macro is a pointer to the specified
- * type, and NOT an array of the specified type. This can be very important
- * if you want the address of the buffer, which you probably do, to pass it
- * to the DMA hardware. The value of &buffer is different in the two cases.
- * In the macro case it will be the address of the pointer, not the address
- * of the space reserved for the buffer. However, in the second case it
- * would be the address of the buffer. So if you are replacing hard coded
- * stack buffers with this macro you need to make sure you remove the & from
- * the locations where you are taking the address of the buffer.
- *
- * Note that the size parameter is the number of array elements to allocate,
- * not the number of bytes.
- *
- * This macro can not be used outside of function scope, or for the creation
- * of a function scoped static buffer. It can not be used to create a cache
- * line aligned global buffer.
+ * @structure: Name of structure (e.g. global_data)
+ * @member: Name of member (e.g. baudrate)
+ * @offset: Expected offset in bytes
*/
-#define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
-#define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
-#define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \
- char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \
- + (align - 1)]; \
- \
- type *name = (type *) ALIGN((uintptr_t)__##name, align)
-#define ALLOC_ALIGN_BUFFER(type, name, size, align) \
- ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
-#define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \
- ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
-#define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \
- ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
+#define check_member(structure, member, offset) _Static_assert( \
+ offsetof(struct structure, member) == offset, \
+ "`struct " #structure "` offset for `" #member "` is not " #offset)
-/*
- * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
- * purpose is to allow allocating aligned buffers outside of function scope.
- * Usage of this macro shall be avoided or used with extreme care!
- */
-#define DEFINE_ALIGN_BUFFER(type, name, size, align) \
- static char __##name[roundup(size * sizeof(type), align)] \
- __aligned(align); \
- \
- static type *name = (type *)__##name
-#define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \
- DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
+/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
+#ifdef CONFIG_EFI_STUB
+#define ll_boot_init() false
+#else
+#define ll_boot_init() true
+#endif
/* Pull in stuff for the build system */
#ifdef DO_DEPS_ONLY
projects / platform / kernel / u-boot.git / blobdiff