* MA 02111-1307 USA
*/
-/*
- * Definitions for Configuring the monitor commands
- */
#ifndef _CMD_CONFIG_H
#define _CMD_CONFIG_H
/*
- * Configurable monitor commands
- */
-#define CFG_CMD_BDI 0x00000001U /* bdinfo */
-#define CFG_CMD_LOADS 0x00000002U /* loads */
-#define CFG_CMD_LOADB 0x00000004U /* loadb */
-#define CFG_CMD_IMI 0x00000008U /* iminfo */
-#define CFG_CMD_CACHE 0x00000010U /* icache, dcache */
-#define CFG_CMD_FLASH 0x00000020U /* flinfo, erase, protect */
-#define CFG_CMD_MEMORY 0x00000040U /* md, mm, nm, mw, cp, cmp, */
- /* crc, base, loop, mtest */
-#define CFG_CMD_NET 0x00000080U /* bootp, tftpboot, rarpboot */
-#define CFG_CMD_ENV 0x00000100U /* saveenv */
-#define CFG_CMD_KGDB 0x00000200U /* kgdb */
-#define CFG_CMD_PCMCIA 0x00000400U /* PCMCIA support */
-#define CFG_CMD_IDE 0x00000800U /* IDE harddisk support */
-#define CFG_CMD_PCI 0x00001000U /* pciinfo */
-#define CFG_CMD_IRQ 0x00002000U /* irqinfo */
-#define CFG_CMD_BOOTD 0x00004000U /* bootd */
-#define CFG_CMD_CONSOLE 0x00008000U /* coninfo */
-#define CFG_CMD_EEPROM 0x00010000U /* EEPROM read/write support */
-#define CFG_CMD_ASKENV 0x00020000U /* ask for env variable */
-#define CFG_CMD_RUN 0x00040000U /* run command in env variable */
-#define CFG_CMD_ECHO 0x00080000U /* echo arguments */
-#define CFG_CMD_I2C 0x00100000U /* I2C serial bus support */
-#define CFG_CMD_REGINFO 0x00200000U /* Register dump */
-#define CFG_CMD_IMMAP 0x00400000U /* IMMR dump support */
-#define CFG_CMD_DATE 0x00800000U /* support for RTC, date/time...*/
-#define CFG_CMD_DHCP 0x01000000U /* DHCP Support */
-#define CFG_CMD_BEDBUG 0x02000000U /* Include BedBug Debugger */
-#define CFG_CMD_FDC 0x04000000U /* Floppy Disk Support */
-#define CFG_CMD_SCSI 0x08000000U /* SCSI Support */
-#define CFG_CMD_AUTOSCRIPT 0x10000000U /* Autoscript Support */
-#define CFG_CMD_MII 0x20000000U /* MII support */
-#define CFG_CMD_SETGETDCR 0x40000000U /* DCR support on 4xx */
-#define CFG_CMD_BSP 0x80000000U /* Board Specific functions */
-
-#define CFG_CMD_ELF 0x0000000100000000U /* ELF (VxWorks) load/boot cmd */
-#define CFG_CMD_MISC 0x0000000200000000U /* Misc functions like sleep etc*/
-#define CFG_CMD_USB 0x0000000400000000U /* USB Support */
-#define CFG_CMD_DOC 0x0000000800000000U /* Disk-On-Chip Support */
-#define CFG_CMD_JFFS2 0x0000001000000000U /* JFFS2 Support */
-#define CFG_CMD_DTT 0x0000002000000000U /* Digital Therm and Thermostat */
-#define CFG_CMD_SDRAM 0x0000004000000000U /* SDRAM DIMM SPD info printout */
-#define CFG_CMD_DIAG 0x0000008000000000U /* Diagnostics */
-#define CFG_CMD_FPGA 0x0000010000000000U /* FPGA configuration Support */
-#define CFG_CMD_HWFLOW 0x0000020000000000U /* RTS/CTS hw flow control */
-#define CFG_CMD_SAVES 0x0000040000000000U /* save S record dump */
-#define CFG_CMD_SPI 0x0000100000000000U /* SPI utility */
-#define CFG_CMD_FDOS 0x0000200000000000U /* Floppy DOS support */
-#define CFG_CMD_VFD 0x0000400000000000U /* VFD support (TRAB) */
-#define CFG_CMD_NAND 0x0000800000000000U /* NAND support */
-#define CFG_CMD_BMP 0x0001000000000000U /* BMP support */
-#define CFG_CMD_PORTIO 0x0002000000000000U /* Port I/O */
-#define CFG_CMD_PING 0x0004000000000000U /* ping support */
-#define CFG_CMD_MMC 0x0008000000000000U /* MMC support */
-#define CFG_CMD_FAT 0x0010000000000000U /* FAT support */
-#define CFG_CMD_IMLS 0x0020000000000000U /* List all found images */
-#define CFG_CMD_ITEST 0x0040000000000000U /* Integer (and string) test */
-#define CFG_CMD_NFS 0x0080000000000000U /* NFS support */
-#define CFG_CMD_REISER 0x0100000000000000U /* Reiserfs support */
-#define CFG_CMD_CDP 0x0200000000000000U /* Cisco Discovery Protocol */
-#define CFG_CMD_XIMG 0x0400000000000000U /* Load part of Multi Image */
-
-#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFU /* ALL commands */
-
-/* Commands that are considered "non-standard" for some reason
- * (memory hogs, requires special hardware, not fully tested, etc.)
- */
-#define CFG_CMD_NONSTD (CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FDC | \
- CFG_CMD_FAT | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_IMMAP | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MII | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_PING | \
- CFG_CMD_PORTIO | \
- CFG_CMD_REGINFO | \
- CFG_CMD_REISER | \
- CFG_CMD_SAVES | \
- CFG_CMD_SCSI | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SPI | \
- CFG_CMD_USB | \
- CFG_CMD_VFD | \
- CFG_CMD_CDP )
-
-/* Default configuration
+ * Temporary placeholder until all users directly
+ * include the proper include file, "config_bootp.h".
*/
-#define CONFIG_CMD_DFL (CFG_CMD_ALL & ~CFG_CMD_NONSTD)
-
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS CONFIG_CMD_DFL
-#endif
-
-
-/*
- * optional BOOTP fields
- */
-
-#define CONFIG_BOOTP_SUBNETMASK 0x00000001
-#define CONFIG_BOOTP_GATEWAY 0x00000002
-#define CONFIG_BOOTP_HOSTNAME 0x00000004
-#define CONFIG_BOOTP_NISDOMAIN 0x00000008
-#define CONFIG_BOOTP_BOOTPATH 0x00000010
-#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
-#define CONFIG_BOOTP_DNS 0x00000040
-#define CONFIG_BOOTP_DNS2 0x00000080
-#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100
-
-#define CONFIG_BOOTP_VENDOREX 0x80000000
-
-#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX)
-
-
-#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \
- CONFIG_BOOTP_GATEWAY | \
- CONFIG_BOOTP_HOSTNAME | \
- CONFIG_BOOTP_BOOTPATH)
-
-#ifndef CONFIG_BOOTP_MASK
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-#endif
+#include "config_bootp.h"
#endif /* _CMD_CONFIG_H */