#define _CLK_H_
#include <dm/ofnode.h>
+#include <linux/err.h>
#include <linux/errno.h>
#include <linux/types.h>
* clock provider. This API provides a standard means for drivers to enable and
* disable clocks, and to set the rate at which they oscillate.
*
- * A driver that implements UCLASS_CLOCK is a clock provider. A provider will
+ * A driver that implements UCLASS_CLK is a clock provider. A provider will
* often implement multiple separate clocks, since the hardware it manages
* often has this capability. clk-uclass.h describes the interface which
* clock providers must implement.
* other clock APIs to identify which clock signal to operate upon.
*
* @dev: The device which implements the clock signal.
+ * @rate: The clock rate (in HZ).
+ * @flags: Flags used across common clock structure (e.g. CLK_)
+ * Clock IP blocks specific flags (i.e. mux, div, gate, etc) are defined
+ * in struct's for those devices (e.g. struct clk_mux).
* @id: The clock signal ID within the provider.
* @data: An optional data field for scenarios where a single integer ID is not
* sufficient. If used, it can be populated through an .of_xlate op and
*/
struct clk {
struct udevice *dev;
+ long long rate; /* in HZ */
+ u32 flags;
+ int enable_count;
/*
* Written by of_xlate. In the future, we might add more fields here.
*/
#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK)
struct phandle_1_arg;
-int clk_get_by_index_platdata(struct udevice *dev, int index,
- struct phandle_1_arg *cells, struct clk *clk);
+/**
+ * clk_get_by_phandle() - Get a clock by its phandle information (of-platadata)
+ *
+ * This function is used when of-platdata is enabled.
+ *
+ * This looks up a clock using the phandle info. With dtoc, each phandle in the
+ * 'clocks' property is transformed into an idx representing the device. For
+ * example:
+ *
+ * clocks = <&dpll_mpu_ck 23>;
+ *
+ * might result in:
+ *
+ * .clocks = {1, {23}},},
+ *
+ * indicating that the clock is udevice idx 1 in dt-plat.c with an argument of
+ * 23. This function can return a valid clock given the above information. In
+ * this example it would return a clock containing the 'dpll_mpu_ck' device and
+ * the clock ID 23.
+ *
+ * @dev: Device containing the phandle
+ * @cells: Phandle info
+ * @clock: A pointer to a clock struct to initialise
+ * @return 0 if OK, or a negative error code.
+ */
+int clk_get_by_phandle(struct udevice *dev, const struct phandle_1_arg *cells,
+ struct clk *clk);
/**
- * clock_get_by_index - Get/request a clock by integer index.
+ * clk_get_by_index() - Get/request a clock by integer index.
*
* This looks up and requests a clock. The index is relative to the client
* device; each device is assumed to have n clocks associated with it somehow,
int clk_get_by_index(struct udevice *dev, int index, struct clk *clk);
/**
- * clock_get_by_index_nodev - Get/request a clock by integer index
+ * clk_get_by_index_nodev - Get/request a clock by integer index
* without a device.
*
* This is a version of clk_get_by_index() that does not use a device.
int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk);
/**
- * clock_get_bulk - Get/request all clocks of a device.
+ * clk_get_bulk - Get/request all clocks of a device.
*
* This looks up and requests all clocks of the client device; each device is
* assumed to have n clocks associated with it somehow, and this function finds
int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk);
/**
- * clock_get_by_name - Get/request a clock by name.
+ * clk_get_by_name - Get/request a clock by name.
*
* This looks up and requests a clock. The name is relative to the client
* device; each device is assumed to have n clocks associated with it somehow,
int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk);
/**
+ * clk_get_by_name_nodev - Get/request a clock by name without a device.
+ *
+ * This is a version of clk_get_by_name() that does not use a device.
+ *
+ * @node: The client ofnode.
+ * @name: The name of the clock to request, within the client's list of
+ * clocks.
+ * @clock: A pointer to a clock struct to initialize.
+ * @return 0 if OK, or a negative error code.
+ */
+int clk_get_by_name_nodev(ofnode node, const char *name, struct clk *clk);
+
+/**
+ * clk_get_optional_nodev - Get/request an optinonal clock by name
+ * without a device.
+ * @node: The client ofnode.
+ * @name: The name of the clock to request.
+ * @name: The name of the clock to request, within the client's list of
+ * clocks.
+ * @clock: A pointer to a clock struct to initialize.
+ *
+ * Behaves the same as clk_get_by_name_nodev() except where there is
+ * no clock producer, in this case, skip the error number -ENODATA, and
+ * the function returns 0.
+ */
+int clk_get_optional_nodev(ofnode node, const char *name, struct clk *clk);
+
+/**
+ * devm_clk_get - lookup and obtain a managed reference to a clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno. The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer. (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * devm_clk_get should not be called from within interrupt context.
+ *
+ * The clock will automatically be freed when the device is unbound
+ * from the bus.
+ */
+struct clk *devm_clk_get(struct udevice *dev, const char *id);
+
+/**
+ * devm_clk_get_optional - lookup and obtain a managed reference to an optional
+ * clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock consumer ID
+ *
+ * Behaves the same as devm_clk_get() except where there is no clock producer.
+ * In this case, instead of returning -ENOENT, the function returns NULL.
+ */
+struct clk *devm_clk_get_optional(struct udevice *dev, const char *id);
+
+/**
* clk_release_all() - Disable (turn off)/Free an array of previously
* requested clocks.
*
*/
int clk_release_all(struct clk *clk, int count);
+/**
+ * devm_clk_put - "free" a managed clock source
+ * @dev: device used to acquire the clock
+ * @clk: clock source acquired with devm_clk_get()
+ *
+ * Note: drivers must ensure that all clk_enable calls made on this
+ * clock source are balanced by clk_disable calls prior to calling
+ * this function.
+ *
+ * clk_put should not be called from within interrupt context.
+ */
+void devm_clk_put(struct udevice *dev, struct clk *clk);
+
#else
static inline int clk_get_by_index(struct udevice *dev, int index,
struct clk *clk)
return -ENOSYS;
}
+static inline int
+clk_get_by_name_nodev(ofnode node, const char *name, struct clk *clk)
+{
+ return -ENOSYS;
+}
+
+static inline int
+clk_get_optional_nodev(ofnode node, const char *name, struct clk *clk)
+{
+ return -ENOSYS;
+}
+
static inline int clk_release_all(struct clk *clk, int count)
{
return -ENOSYS;
}
#endif
-#if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) && \
- CONFIG_IS_ENABLED(CLK)
+/**
+ * enum clk_defaults_stage - What stage clk_set_defaults() is called at
+ * @CLK_DEFAULTS_PRE: Called before probe. Setting of defaults for clocks owned
+ * by this clock driver will be defered until after probing.
+ * @CLK_DEFAULTS_POST: Called after probe. Only defaults for clocks owned by
+ * this clock driver will be set.
+ * @CLK_DEFAULTS_POST_FORCE: Called after probe, and always set defaults, even
+ * before relocation. Usually, defaults are not set
+ * pre-relocation to avoid setting them twice (when
+ * the device is probed again post-relocation). This
+ * may incur a performance cost as device tree
+ * properties must be parsed for a second time.
+ * However, when not using SPL, pre-relocation may be
+ * the only time we can set defaults for some clocks
+ * (such as those used for the RAM we will relocate
+ * into).
+ */
+enum clk_defaults_stage {
+ CLK_DEFAULTS_PRE = 0,
+ CLK_DEFAULTS_POST = 1,
+ CLK_DEFAULTS_POST_FORCE,
+};
+
+#if CONFIG_IS_ENABLED(OF_REAL) && CONFIG_IS_ENABLED(CLK)
/**
* clk_set_defaults - Process 'assigned-{clocks/clock-parents/clock-rates}'
* properties to configure clocks
*
* @dev: A device to process (the ofnode associated with this device
* will be processed).
+ * @stage: The stage of the probing process this function is called during.
*/
-int clk_set_defaults(struct udevice *dev);
+int clk_set_defaults(struct udevice *dev, enum clk_defaults_stage stage);
#else
-static inline int clk_set_defaults(struct udevice *dev)
+static inline int clk_set_defaults(struct udevice *dev, int stage)
{
return 0;
}
return clk_release_all(bulk->clks, bulk->count);
}
+#if CONFIG_IS_ENABLED(CLK)
/**
* clk_request - Request a clock by provider-specific ID.
*
int clk_request(struct udevice *dev, struct clk *clk);
/**
- * clock_free - Free a previously requested clock.
+ * clk_free - Free a previously requested clock.
*
* @clock: A clock struct that was previously successfully requested by
* clk_request/get_by_*().
*
* @clk: A clock struct that was previously successfully requested by
* clk_request/get_by_*().
- * @return clock rate in Hz, or -ve error code.
+ * @return clock rate in Hz on success, 0 for invalid clock, or -ve error code
+ * for other errors.
*/
ulong clk_get_rate(struct clk *clk);
/**
+ * clk_get_parent() - Get current clock's parent.
+ *
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return pointer to parent's struct clk, or error code passed as pointer
+ */
+struct clk *clk_get_parent(struct clk *clk);
+
+/**
+ * clk_get_parent_rate() - Get parent of current clock rate.
+ *
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return clock rate in Hz, or -ve error code.
+ */
+long long clk_get_parent_rate(struct clk *clk);
+
+/**
+ * clk_round_rate() - Adjust a rate to the exact rate a clock can provide
+ *
+ * This answers the question "if I were to pass @rate to clk_set_rate(),
+ * what clock rate would I end up with?" without changing the hardware
+ * in any way. In other words:
+ *
+ * rate = clk_round_rate(clk, r);
+ *
+ * and:
+ *
+ * rate = clk_set_rate(clk, r);
+ *
+ * are equivalent except the former does not modify the clock hardware
+ * in any way.
+ *
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @rate: desired clock rate in Hz.
+ * @return rounded rate in Hz, or -ve error code.
+ */
+ulong clk_round_rate(struct clk *clk, ulong rate);
+
+/**
* clk_set_rate() - Set current clock rate.
*
* @clk: A clock struct that was previously successfully requested by
*/
int clk_disable_bulk(struct clk_bulk *bulk);
-int soc_clk_dump(void);
+/**
+ * clk_is_match - check if two clk's point to the same hardware clock
+ * @p: clk compared against q
+ * @q: clk compared against p
+ *
+ * Returns true if the two struct clk pointers both point to the same hardware
+ * clock node.
+ *
+ * Returns false otherwise. Note that two NULL clks are treated as matching.
+ */
+bool clk_is_match(const struct clk *p, const struct clk *q);
+
+/**
+ * clk_get_by_id() - Get the clock by its ID
+ *
+ * @id: The clock ID to search for
+ *
+ * @clkp: A pointer to clock struct that has been found among added clocks
+ * to UCLASS_CLK
+ * @return zero on success, or -ENOENT on error
+ */
+int clk_get_by_id(ulong id, struct clk **clkp);
+
+/**
+ * clk_dev_binded() - Check whether the clk has a device binded
+ *
+ * @clk A pointer to the clk
+ *
+ * @return true on binded, or false on no
+ */
+bool clk_dev_binded(struct clk *clk);
+
+#else /* CONFIG_IS_ENABLED(CLK) */
+
+static inline int clk_request(struct udevice *dev, struct clk *clk)
+{
+ return -ENOSYS;
+}
+
+static inline int clk_free(struct clk *clk)
+{
+ return 0;
+}
+
+static inline ulong clk_get_rate(struct clk *clk)
+{
+ return -ENOSYS;
+}
+
+static inline struct clk *clk_get_parent(struct clk *clk)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline long long clk_get_parent_rate(struct clk *clk)
+{
+ return -ENOSYS;
+}
+
+static inline ulong clk_round_rate(struct clk *clk, ulong rate)
+{
+ return -ENOSYS;
+}
+
+static inline ulong clk_set_rate(struct clk *clk, ulong rate)
+{
+ return -ENOSYS;
+}
+
+static inline int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return -ENOSYS;
+}
+
+static inline int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static inline int clk_enable_bulk(struct clk_bulk *bulk)
+{
+ return 0;
+}
+
+static inline int clk_disable(struct clk *clk)
+{
+ return 0;
+}
+
+static inline int clk_disable_bulk(struct clk_bulk *bulk)
+{
+ return 0;
+}
+
+static inline bool clk_is_match(const struct clk *p, const struct clk *q)
+{
+ return false;
+}
+
+static inline int clk_get_by_id(ulong id, struct clk **clkp)
+{
+ return -ENOSYS;
+}
+
+static inline bool clk_dev_binded(struct clk *clk)
+{
+ return false;
+}
+#endif /* CONFIG_IS_ENABLED(CLK) */
/**
* clk_valid() - check if clk is valid
*/
static inline bool clk_valid(struct clk *clk)
{
- return !!clk->dev;
+ return clk && !!clk->dev;
}
+
+int soc_clk_dump(void);
+
#endif
+
+#define clk_prepare_enable(clk) clk_enable(clk)
+#define clk_disable_unprepare(clk) clk_disable(clk)