+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* This file implements recording of each stage of the boot process. It is
* intended to implement timing of each stage, reporting this information
* to the user and passing it to the OS for logging / further analysis.
+ * Note that it requires timer_get_boot_us() to be defined by the board
*
* Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
#ifndef _BOOTSTAGE_H
#define _BOOTSTAGE_H
-/* The number of boot stage records available for the user */
-#ifndef CONFIG_BOOTSTAGE_USER_COUNT
-#define CONFIG_BOOTSTAGE_USER_COUNT 20
-#endif
+/* Flags for each bootstage record */
+enum bootstage_flags {
+ BOOTSTAGEF_ERROR = 1 << 0, /* Error record */
+ BOOTSTAGEF_ALLOC = 1 << 1, /* Allocate an id */
+};
+
+/* bootstate sub-IDs used for kernel and ramdisk ranges */
+enum {
+ BOOTSTAGE_SUB_FORMAT,
+ BOOTSTAGE_SUB_FORMAT_OK,
+ BOOTSTAGE_SUB_NO_UNIT_NAME,
+ BOOTSTAGE_SUB_UNIT_NAME,
+ BOOTSTAGE_SUB_SUBNODE,
+
+ BOOTSTAGE_SUB_CHECK,
+ BOOTSTAGE_SUB_HASH = 5,
+ BOOTSTAGE_SUB_CHECK_ARCH = 5,
+ BOOTSTAGE_SUB_CHECK_ALL,
+ BOOTSTAGE_SUB_GET_DATA,
+ BOOTSTAGE_SUB_CHECK_ALL_OK = 7,
+ BOOTSTAGE_SUB_GET_DATA_OK,
+ BOOTSTAGE_SUB_LOAD,
+};
/*
* A list of boot stages that we know about. Each of these indicates the
BOOTSTAGE_ID_POST_FAIL_R, /* Post failure reported after reloc */
/*
- * This set is reported ony by x86, and the meaning is different. In
+ * This set is reported only by x86, and the meaning is different. In
* this case we are reporting completion of a particular stage.
- * This should probably change in he x86 code (which doesn't report
+ * This should probably change in the x86 code (which doesn't report
* errors in any case), but discussion this can perhaps wait until we
* have a generic board implementation.
*/
BOOTSTAGE_ID_NET_DONE_ERR,
BOOTSTAGE_ID_NET_DONE,
+ BOOTSTAGE_ID_FIT_FDT_START = 90,
/*
* Boot stages related to loading a FIT image. Some of these are a
* bit wonky.
*/
- BOOTSTAGE_ID_FIT_FORMAT = 100,
- BOOTSTAGE_ID_FIT_NO_UNIT_NAME,
- BOOTSTAGE_ID_FIT_UNIT_NAME,
- BOOTSTAGE_ID_FIT_CONFIG,
- BOOTSTAGE_ID_FIT_CHECK_SUBIMAGE,
- BOOTSTAGE_ID_FIT_CHECK_HASH = 104,
-
- BOOTSTAGE_ID_FIT_CHECK_ARCH,
- BOOTSTAGE_ID_FIT_CHECK_KERNEL,
- BOOTSTAGE_ID_FIT_CHECKED,
-
- BOOTSTAGE_ID_FIT_KERNEL_INFO_ERR = 107,
- BOOTSTAGE_ID_FIT_KERNEL_INFO,
+ BOOTSTAGE_ID_FIT_KERNEL_START = 100,
+
+ BOOTSTAGE_ID_FIT_CONFIG = 110,
BOOTSTAGE_ID_FIT_TYPE,
+ BOOTSTAGE_ID_FIT_KERNEL_INFO,
BOOTSTAGE_ID_FIT_COMPRESSION,
BOOTSTAGE_ID_FIT_OS,
BOOTSTAGE_ID_FIT_LOADADDR,
BOOTSTAGE_ID_OVERWRITTEN,
- BOOTSTAGE_ID_FIT_RD_FORMAT = 120,
- BOOTSTAGE_ID_FIT_RD_FORMAT_OK,
- BOOTSTAGE_ID_FIT_RD_NO_UNIT_NAME,
- BOOTSTAGE_ID_FIT_RD_UNIT_NAME,
- BOOTSTAGE_ID_FIT_RD_SUBNODE,
+ /* Next 10 IDs used by BOOTSTAGE_SUB_... */
+ BOOTSTAGE_ID_FIT_RD_START = 120, /* Ramdisk stages */
- BOOTSTAGE_ID_FIT_RD_CHECK,
- BOOTSTAGE_ID_FIT_RD_HASH = 125,
- BOOTSTAGE_ID_FIT_RD_CHECK_ALL,
- BOOTSTAGE_ID_FIT_RD_GET_DATA,
- BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK = 127,
- BOOTSTAGE_ID_FIT_RD_GET_DATA_OK,
- BOOTSTAGE_ID_FIT_RD_LOAD,
+ /* Next 10 IDs used by BOOTSTAGE_SUB_... */
+ BOOTSTAGE_ID_FIT_SETUP_START = 130, /* x86 setup stages */
BOOTSTAGE_ID_IDE_FIT_READ = 140,
BOOTSTAGE_ID_IDE_FIT_READ_OK,
BOOTSTAGE_ID_NAND_FIT_READ = 150,
BOOTSTAGE_ID_NAND_FIT_READ_OK,
+ BOOTSTAGE_ID_FIT_LOADABLE_START = 160, /* for Loadable Images */
/*
* These boot stages are new, higher level, and not directly related
* to the old boot progress numbers. They are useful for recording
* rough boot timing information.
*/
BOOTSTAGE_ID_AWAKE,
+ BOOTSTAGE_ID_START_SPL,
+ BOOTSTAGE_ID_END_SPL,
BOOTSTAGE_ID_START_UBOOT_F,
BOOTSTAGE_ID_START_UBOOT_R,
BOOTSTAGE_ID_USB_START,
BOOTSTAGE_ID_BOOTM_START,
BOOTSTAGE_ID_BOOTM_HANDOFF,
BOOTSTAGE_ID_MAIN_LOOP,
+ BOOTSTAGE_ID_ENTER_CLI_LOOP,
BOOTSTAGE_KERNELREAD_START,
BOOTSTAGE_KERNELREAD_STOP,
+ BOOTSTAGE_ID_BOARD_INIT,
+ BOOTSTAGE_ID_BOARD_INIT_DONE,
BOOTSTAGE_ID_CPU_AWAKE,
BOOTSTAGE_ID_MAIN_CPU_AWAKE,
BOOTSTAGE_ID_MAIN_CPU_READY,
+ BOOTSTAGE_ID_ACCUM_LCD,
+ BOOTSTAGE_ID_ACCUM_SCSI,
+ BOOTSTAGE_ID_ACCUM_SPI,
+ BOOTSTAGE_ID_ACCUM_DECOMP,
+ BOOTSTAGE_ID_ACCUM_OF_LIVE,
+ BOOTSTAGE_ID_FPGA_INIT,
+ BOOTSTATE_ID_ACCUM_DM_SPL,
+ BOOTSTATE_ID_ACCUM_DM_F,
+ BOOTSTATE_ID_ACCUM_DM_R,
+
/* a few spare for the user, from here */
BOOTSTAGE_ID_USER,
- BOOTSTAGE_ID_COUNT = BOOTSTAGE_ID_USER + CONFIG_BOOTSTAGE_USER_COUNT,
BOOTSTAGE_ID_ALLOC,
};
/*
+ * Return the time since boot in microseconds, This is needed for bootstage
+ * and should be defined in CPU- or board-specific code. If undefined then
+ * you will get a link error.
+ */
+ulong timer_get_boot_us(void);
+
+#if defined(USE_HOSTCC)
+#define show_boot_progress(val) do {} while (0)
+#else
+/**
* Board code can implement show_boot_progress() if needed.
*
* @param val Progress state (enum bootstage_id), or -id if an error
* has occurred.
*/
void show_boot_progress(int val);
+#endif
+
+#if !defined(USE_HOSTCC)
+#if CONFIG_IS_ENABLED(BOOTSTAGE)
+#define ENABLE_BOOTSTAGE
+#endif
+#endif
+
+#ifdef ENABLE_BOOTSTAGE
-#ifdef CONFIG_BOOTSTAGE
/* This is the full bootstage implementation */
-/*
+/**
+ * Relocate existing bootstage records
+ *
+ * Call this after relocation has happened and after malloc has been initted.
+ * We need to copy any pointers in bootstage records that were added pre-
+ * relocation, since memory can be overwritten later.
+ * @return Always returns 0, to indicate success
+ */
+int bootstage_relocate(void);
+
+/**
+ * Add a new bootstage record
+ *
+ * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC)
+ * @param name Name of record, or NULL for none
+ * @param flags Flags (BOOTSTAGEF_...)
+ * @param mark Time to record in this record, in microseconds
+ */
+ulong bootstage_add_record(enum bootstage_id id, const char *name,
+ int flags, ulong mark);
+
+/**
* Mark a time stamp for the current boot stage.
*/
ulong bootstage_mark(enum bootstage_id id);
ulong bootstage_mark_name(enum bootstage_id id, const char *name);
+/**
+ * Mark a time stamp in the given function and line number
+ *
+ * See BOOTSTAGE_MARKER() for a convenient macro.
+ *
+ * @param file Filename to record (NULL if none)
+ * @param func Function name to record
+ * @param linenum Line number to record
+ * @return recorded time stamp
+ */
+ulong bootstage_mark_code(const char *file, const char *func,
+ int linenum);
+
+/**
+ * Mark the start of a bootstage activity. The end will be marked later with
+ * bootstage_accum() and at that point we accumulate the time taken. Calling
+ * this function turns the given id into a accumulator rather than and
+ * absolute mark in time. Accumulators record the total amount of time spent
+ * in an activty during boot.
+ *
+ * @param id Bootstage id to record this timestamp against
+ * @param name Textual name to display for this id in the report (maybe NULL)
+ * @return start timestamp in microseconds
+ */
+uint32_t bootstage_start(enum bootstage_id id, const char *name);
+
+/**
+ * Mark the end of a bootstage activity
+ *
+ * After previously marking the start of an activity with bootstage_start(),
+ * call this function to mark the end. You can call these functions in pairs
+ * as many times as you like.
+ *
+ * @param id Bootstage id to record this timestamp against
+ * @return time spent in this iteration of the activity (i.e. the time now
+ * less the start time recorded in the last bootstage_start() call
+ * with this id.
+ */
+uint32_t bootstage_accum(enum bootstage_id id);
+
/* Print a report about boot time */
void bootstage_report(void);
+/**
+ * Add bootstage information to the device tree
+ *
+ * @return 0 if ok, -ve on error
+ */
+int bootstage_fdt_add_report(void);
+
+/**
+ * Stash bootstage data into memory
+ *
+ * @param base Base address of memory buffer
+ * @param size Size of memory buffer
+ * @return 0 if stashed ok, -1 if out of space
+ */
+int bootstage_stash(void *base, int size);
+
+/**
+ * Read bootstage data from memory
+ *
+ * Bootstage data is read from memory and placed in the bootstage table
+ * in the user records.
+ *
+ * @param base Base address of memory buffer
+ * @param size Size of memory buffer (-1 if unknown)
+ * @return 0 if unstashed ok, -ENOENT if bootstage info not found, -ENOSPC if
+ * there is not space for read the stacked data, or other error if
+ * something else went wrong
+ */
+int bootstage_unstash(const void *base, int size);
+
+/**
+ * bootstage_get_size() - Get the size of the bootstage data
+ *
+ * @return size of boostage data in bytes
+ */
+int bootstage_get_size(void);
+
+/**
+ * bootstage_init() - Prepare bootstage for use
+ *
+ * @first: true if this is the first time bootstage is set up. This causes it
+ * to add a 'reset' record with a time of 0.
+ */
+int bootstage_init(bool first);
+
#else
+static inline ulong bootstage_add_record(enum bootstage_id id,
+ const char *name, int flags, ulong mark)
+{
+ return 0;
+}
+
/*
* This is a dummy implementation which just calls show_boot_progress(),
* and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined
*/
+static inline int bootstage_relocate(void)
+{
+ return 0;
+}
+
static inline ulong bootstage_mark(enum bootstage_id id)
{
show_boot_progress(id);
static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name)
{
+ show_boot_progress(id);
+ return 0;
+}
+
+static inline ulong bootstage_mark_code(const char *file, const char *func,
+ int linenum)
+{
+ return 0;
+}
+
+static inline uint32_t bootstage_start(enum bootstage_id id, const char *name)
+{
+ return 0;
+}
+
+static inline uint32_t bootstage_accum(enum bootstage_id id)
+{
+ return 0;
+}
+
+static inline int bootstage_stash(void *base, int size)
+{
+ return 0; /* Pretend to succeed */
+}
+
+static inline int bootstage_unstash(const void *base, int size)
+{
+ return 0; /* Pretend to succeed */
+}
+
+static inline int bootstage_get_size(void)
+{
+ return 0;
+}
+
+static inline int bootstage_init(bool first)
+{
return 0;
}
+#endif /* ENABLE_BOOTSTAGE */
-#endif /* CONFIG_BOOTSTAGE */
+/* Helper macro for adding a bootstage to a line of code */
+#define BOOTSTAGE_MARKER() \
+ bootstage_mark_code(__FILE__, __func__, __LINE__)
#endif