#include <stdbool.h>
#include <unistd.h>
#include <glib.h>
+#include <stdint.h>
+
#ifdef __cplusplus
extern "C" {
* @{
*/
-#define BLUETOOTH_ADDRESS_STRING_LENGTH 17 /**< This specifies bluetooth device address length (AA:BB:CC:DD:EE:FF) */
+#define BLUETOOTH_ADDRESS_STRING_LENGTH 18 /**< This specifies bluetooth device address length (AA:BB:CC:DD:EE:FF) */
#define BLUETOOTH_ADDRESS_LENGTH 6 /**< This specifies bluetooth device address length */
#define BLUETOOTH_VERSION_LENGTH_MAX 30 /**< This specifies bluetooth device version length */
#define BLUETOOTH_INTERFACE_NAME_LENGTH 16
#define BLUETOOTH_OOB_DATA_LENGTH 16
+#define BLUETOOTH_LE_OOB_DATA_LENGTH 100
+
#define BLUETOOTH_PIN_CODE_MAX_LENGTH 16
+#ifdef TIZEN_GATT_CLIENT
+#define BLUETOOTH_GATT_ATT_DATA_LENGTH_MAX 610 /**< GATT ATT value max len */
+#endif
+
/**
* This is Bluetooth Connected event role
*/
#define BLUETOOTH_ERROR_DEVICE_POLICY_RESTRICTION ((int)BLUETOOTH_ERROR_BASE - 0x28)
/**< Device Policy Restricted */
+
+#define BLUETOOTH_ERROR_NO_DATA ((int)BLUETOOTH_ERROR_BASE - 0x29)
+ /**< No data */
+
+#define BLUETOOTH_ERROR_AUTHORIZATION_REJECTED ((int)BLUETOOTH_ERROR_BASE - 0x2a)
+ /**< Authorization rejected */
+
/**
* Error codes for ATT Error response *
*/
#define BLUETOOTH_ATT_ERROR_UNSUPPORTED_GROUP_TYPE 0x10
#define BLUETOOTH_ATT_ERROR_INSUFFICIENT_RESOURCES 0x11
/* Common profile error codes */
-#define BLUETOOTH_ATT_ERROR_WRITE_REQUEST_REJECTED 0x80
+#define BLUETOOTH_ATT_ERROR_WRITE_REQUEST_REJECTED 0xFC
#define BLUETOOTH_ATT_ERROR_CCCD_IMPROPERLY_CONFIGURED 0xFD
#define BLUETOOTH_ATT_ERROR_PROCEDURE_ALREADY_IN_PROGRESS 0xFE
-#define BLUETOOTH_ATT_ERROR_OUT_OF_RANGE 0xFF
+#define BLUETOOTH_ATT_ERROR_OUT_OF_RANGE 0xFF
/*
* Bluetooth ATT error codes specific to OTP
*/
-#define BLUETOOTH_ATT_ERROR_OBJECT_NOT_SELECTED 0x81
-#define BLUETOOTH_ATT_ERROR_CONCURRENCY_LIMIT_EXCEEDED 0x82
-#define BLUETOOTH_ATT_ERROR_OBJECT_NAME_EXISTS 0x83
+#define BLUETOOTH_OTP_ERROR_WRITE_REQUEST_REJECTED 0x80
+#define BLUETOOTH_OTP_ERROR_OBJECT_NOT_SELECTED 0x81
+#define BLUETOOTH_OTP_ERROR_CONCURRENCY_LIMIT_EXCEEDED 0x82
+#define BLUETOOTH_OTP_ERROR_OBJECT_NAME_EXISTS 0x83
/*
* Bluetooth OTP error codes
#define BLUETOOTH_ERROR_AUTH_FAILURE 0x05
#define BLUETOOTH_ERROR_PIN_OR_KEY_MISSING 0x06
#define BLUETOOTH_ERROR_CONNECTION_TIMEOUT 0x08
+#define BLUETOOTH_ERROR_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS 0x0e
#define BLUETOOTH_ERROR_REMOTE_USER_TERM 0x13
#define BLUETOOTH_ERROR_REMOTE_LOW_RESOURCES 0x14
#define BLUETOOTH_ERROR_REMOTE_POWER_OFF 0x15
} bluetooth_device_pin_code_t;
/**
+ * This is data for battery usage monitoring
+ */
+
+typedef struct {
+ time_t session_start_time;
+ time_t session_end_time;
+ uint16_t session_connected_time;
+ uint16_t session_scan_time;
+ GSList *atm_list;
+} bt_battery_data;
+
+typedef struct {
+ uid_t uid;
+ pid_t pid;
+ uint16_t rx_bytes;
+ uint16_t tx_bytes;
+ uint time;
+} bt_battery_app_data;
+
+/**
* Adapter state
*/
typedef enum {
float interval_max;
guint8 filter_policy;
guint8 type;
+ int tx_power_level;
} bluetooth_advertising_params_t;
/**
float window; /**< LE scan window */
} bluetooth_le_scan_params_t;
+/**
+* LE Scan type
+*/
+typedef enum {
+ BLUETOOTH_LE_PASSIVE_SCAN = 0x00,
+ BLUETOOTH_LE_ACTIVE_SCAN
+} bluetooth_le_scan_type_t;
+
/*
LE Connection Update
*/
BLUETOOTH_EVENT_ENABLED, /**< Bluetooth event adpater enabled */
BLUETOOTH_EVENT_DISABLED, /**< Bluetooth event adpater disabled */
+ BLUETOOTH_EVENT_DISABLED_BATTERY_DATA, /**< Bluetooth event adapter disabled battery data*/
BLUETOOTH_EVENT_LE_ENABLED, /**< Bluetooth event adpater enabled */
BLUETOOTH_EVENT_LE_DISABLED, /**< Bluetooth event adpater disabled */
BLUETOOTH_EVENT_LOCAL_NAME_CHANGED, /**< Bluetooth event local name changed*/
BLUETOOTH_EVENT_GATT_READ_DESC, /**<Gatt Read Characteristic Descriptor Value */
BLUETOOTH_EVENT_GATT_WRITE_DESC, /**<Gatt Write Characteristic Descriptor Value */
BLUETOOTH_EVENT_GATT_SVC_CHAR_DESC_DISCOVERED, /**<Gatt Char Descriptors Discovered Event*/
+#ifdef TIZEN_GATT_CLIENT
+ BLUETOOTH_EVENT_GATT_SERVER_CONNECTED,/**<Local Gatt Server connected event */
+ BLUETOOTH_EVENT_GATT_SERVER_DISCONNECTED, /**<Local Gatt Server Disconnected event */
+ BLUETOOTH_EVENT_GATT_CLIENT_CONNECTED,/**<Local Gatt Client connected event */
+ BLUETOOTH_EVENT_GATT_CLIENT_DISCONNECTED, /**<Local Gatt Client Disconnected event */
+#else
BLUETOOTH_EVENT_GATT_CONNECTED,/**<Gatt connected event */
BLUETOOTH_EVENT_GATT_DISCONNECTED, /**<Gatt Disconnected event */
+#endif
BLUETOOTH_EVENT_GATT_ATT_MTU_CHANGED, /**<Attribute protocol MTU changed event */
+ BLUETOOTH_EVENT_GATT_SERVER_ATT_MTU_CHANGED, /**<Attribute protocol Server MTU changed event */
BLUETOOTH_EVENT_GATT_SERVER_CHARACTERISTIC_VALUE_CHANGED, /**<Gatt Char write callback event */
BLUETOOTH_EVENT_GATT_SERVER_READ_REQUESTED, /** <GATT Characteristic/Descriptor Read Request event */
BLUETOOTH_EVENT_GATT_SERVER_VALUE_CHANGED, /** <GATT Characteristic/Descriptor Value change event */
BLUETOOTH_EVENT_GATT_SERVER_NOTIFICATION_STATE_CHANGED, /** <GATT Characteristic Notification change event */
BLUETOOTH_EVENT_GATT_SERVER_NOTIFICATION_COMPLETED, /** <GATT Characteristic Notification or Indication completed event */
BLUETOOTH_EVENT_GATT_CLIENT_SERVICE_CHANGED, /** <GATT Client service change event */
-
+ BLUETOOTH_EVENT_GATT_SERVER_ACQUIRE_WRITE, /** <GATT Characteristic/Descriptor Value change event */
+ BLUETOOTH_EVENT_GATT_SERVER_ACQUIRE_NOTIFY,
BLUETOOTH_EVENT_AG_CONNECTED = BLUETOOTH_EVENT_AUDIO_BASE, /**<AG service connected event*/
BLUETOOTH_EVENT_AG_DISCONNECTED, /**<AG service disconnected event*/
BLUETOOTH_EVENT_AG_SPEAKER_GAIN, /**<Speaker gain request event*/
BLUETOOTH_EVENT_AVRCP_SETTING_EQUALIZER_STATUS, /**<AVRCP service player equalizer status event*/
BLUETOOTH_EVENT_AVRCP_SETTING_REPEAT_STATUS, /**<AVRCP service player repeat status event*/
BLUETOOTH_EVENT_AVRCP_SETTING_SCAN_STATUS, /**<AVRCP service player scan status event*/
+ BLUETOOTH_EVENT_AVRCP_DELAY_CHANGED, /**<AVRCP service transport delay changed event*/
+ BLUETOOTH_EVENT_AVRCP_VOLUME_CHANGED, /**<AVRCP service transport volume changed event*/
+ BLUETOOTH_EVENT_AUDIO_AVC_STATUS, /**<Absolute Volume Control status changed event*/
BLUETOOTH_EVENT_HF_CONNECTED,
BLUETOOTH_EVENT_HF_DISCONNECTED,
BLUETOOTH_EVENT_HF_AUDIO_CONNECTED,
BLUETOOTH_EVENT_HF_CALLSETUP_DIALING,
BLUETOOTH_EVENT_HF_CALLSETUP_ALERTING,
BLUETOOTH_EVENT_HF_CIEV_DEVICE_STATUS_CHANGED,
+ BLUETOOTH_EVENT_AUDIO_AVC_MODE_CHANGED,
BLUETOOTH_HID_CONNECTED = BLUETOOTH_EVENT_HID_BASE, /**< Input connectd event*/
BLUETOOTH_HID_DISCONNECTED, /**< Input disconnectd event*/
bluetooth_device_address_t device_address; /**< remote device address */
bluetooth_device_name_t device_name; /**< device name */
char str_passkey[BLUETOOTH_DEVICE_PASSKEY_LENGTH_MAX]; /**< pass-key string */
+ bool incoming; /**< stores if bonding request is incoming */
} bluetooth_authentication_request_info_t;
/**
bluetooth_device_address_t device_addr;
unsigned char addr_type;
int disc_reason;
+ int rssi;
} bt_connection_info_t;
/**
HTYPE_TRANS_GET_PROTOCOL,
HTYPE_TRANS_SET_PROTOCOL,
HTYPE_TRANS_DATA,
- HTYPE_TRANS_UNKNOWN
+ HTYPE_TRANS_UNKNOWN,
+ HTYPE_TRANS_GET_IDLE = 0xF0,
+ HTYPE_TRANS_SET_IDLE = 0xF1,
} bt_hid_header_type_t;
/**
/**< device address */
} bluetooth_rfcomm_connection_request_t;
-typedef struct {
- int socket_fd;
- /**< the socket fd */
- bluetooth_device_address_t device_addr;
- /**< device address */
-} bluetooth_hid_request_t;
-
/**
* HDP QOS types
*/
unsigned char randomizer256[BLUETOOTH_OOB_DATA_LENGTH];
unsigned int hash256_len;
unsigned int randomizer256_len;
+
+ unsigned char eir[BLUETOOTH_LE_OOB_DATA_LENGTH];
+ unsigned int eir_len;
} bt_oob_data_t;
/**
typedef struct {
int count;
char **handle;
+#ifdef TIZEN_GATT_CLIENT
+ char uuids[BLUETOOTH_MAX_SERVICES_FOR_DEVICE][BLUETOOTH_UUID_STRING_MAX];
+ int inst_id[BLUETOOTH_MAX_SERVICES_FOR_DEVICE];
+#endif
} bt_gatt_handle_info_t;
+#ifdef TIZEN_GATT_CLIENT
+/**
+ * Structure to a most basic GATT attribute handle data
+ */
+typedef struct {
+ int instance_id;
+ unsigned char uuid[16];
+ char address[BLUETOOTH_ADDRESS_STRING_LENGTH];
+} bt_gatt_handle_property_t;
+#endif
+
/**
* Structure to GATT Remote service data
*/
gboolean primary;
bt_gatt_handle_info_t include_handles;
bt_gatt_handle_info_t char_handle;
+#ifdef TIZEN_GATT_CLIENT
+ bt_gatt_handle_property_t prop; /* Added Service UUID, instance_id & associated remote device */
+#endif
} bt_gatt_service_property_t;
/**
unsigned int permission;
char *representation;
bt_gatt_handle_info_t char_desc_handle;
+#ifdef TIZEN_GATT_CLIENT
+ bt_gatt_handle_property_t prop; /* Added Char UUID, instance_id */
+ bt_gatt_handle_property_t svc_prop; /* Added Service UUID, instance_id */
+ char value[BLUETOOTH_GATT_ATT_DATA_LENGTH_MAX]; /* Added */
+ char address[BLUETOOTH_ADDRESS_STRING_LENGTH]; /* Added */
+#endif
} bt_gatt_char_property_t;
/**
char *uuid;
unsigned char *val;
unsigned int val_len;
+#ifdef TIZEN_GATT_CLIENT
+ bt_gatt_handle_property_t prop; /* Added Descriptor UUID, instance_id */
+ bt_gatt_handle_property_t char_prop; /* Added Char UUID, instance_id */
+ bt_gatt_handle_property_t svc_prop; /* Added Service UUID, instance_id */
+ char value[BLUETOOTH_GATT_ATT_DATA_LENGTH_MAX];/* Added */
+ char address[BLUETOOTH_ADDRESS_STRING_LENGTH]; /* Added */
+#endif
} bt_gatt_char_descriptor_property_t;
/**
guint32 val_len;
} bt_gatt_char_value_t;
+typedef struct {
+ unsigned char UUID[16];
+ char address[18];
+ char *val;
+ int len;
+} bt_gatt_notify_req_t ;
+
/**
* Structure to GATT Read Request
*/
bluetooth_device_address_t device_addr;
char *svc_path;
bluetooth_gatt_service_change_type_t change_type;
+#ifdef TIZEN_GATT_CLIENT
+ int inst_id;
+ char *uuid;
+#endif
} bt_gatt_service_change_t;
/**
} bt_gatt_indicate_confirm_t;
/**
+ * Structure for GATT response data
+ */
+typedef struct {
+ char *handle;
+ guint8 *value;
+ guint32 len;
+ gpointer user_data;
+} bt_gatt_resp_data_t;
+
+/**
* Structure to RSSI Signal Strength Alert
*/
TRUSTED_PROFILE_PBAP = 1,
TRUSTED_PROFILE_MAP,
TRUSTED_PROFILE_SAP,
+ TRUSTED_PROFILE_HFP_HF,
+ TRUSTED_PROFILE_A2DP,
TRUSTED_PROFILE_ALL = 0xFFFFFFFF,
} bluetooth_trusted_profile_t;
/**
- * Restricted Profile types
- */
-typedef enum {
- RESTRICTED_PROFILE_HFP_HS = 1,
- RESTRICTED_PROFILE_A2DP,
-} bluetooth_restricted_profile_t;
-
-/**
* Structure for LE data length change params
*/
typedef struct {
@endcode
*/
int bluetooth_disable_adapter(void);
+int bluetooth_read_battery_data(bt_battery_data *latest);
+int bluetooth_set_battery_monitor_state(bool state);
+int bluetooth_get_battery_monitor_state(void);
int bluetooth_recover_adapter(void);
int bluetooth_check_adapter_le(void);
int bluetooth_enable_adapter_le(void);
int bluetooth_disable_adapter_le(void);
+int bluetooth_get_uuid_name(const char *uuid, char **name);
/**
* @fn int bluetooth_reset_adapter(void)
int profile, int *trust);
/**
- * @fn int bluetooth_set_profile_restricted(const bluetooth_device_address_t *device_address, int profile, int restricted)
- * @brief Sets a profile restricted connection for a device
- *
- * This function is used to Set a profile as restricted for a device
- *
- * This function is a synchronous call.
- *
- * @param[in] device_address a device address of remote bluetooth device
- * @param[in] profile profile which is to be set as restricted[1-HFP_HS, 2-A2DP]
- * @param[in] restricted to set as restricted or not[1-restricted 0-permitted]
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
- * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
- *
- * @remark None
- */
-int bluetooth_set_profile_restricted(
- const bluetooth_device_address_t *device_address,
- int profile, int restricted);
-
-/**
- * @fn int bluetooth_get_profile_restricted(const bluetooth_device_address_t *device_address, int profile, int *restricted)
- * @brief Gets a restricted connection state
- *
- * This function is used to Get a profile is restricted or not for a device
- *
- * This function is a synchronous call.
- *
- * @param[in] device_address a device address of remote bluetooth device
- * @param[in] profile profile whose restricted status is needed[1-HFP_HS, 2-A2DP]
- * @param[out] restricted profile is set as restricted or not[1-restricted 0-permitted]
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
- * BLUETOOTH_ERROR_INVALID_PARAM - Bluetooth name parameter is incorrect \n
- * BLUETOOTH_ERROR_INTERNAL - The dbus method call is fail \n
- *
- * @remark None
- */
-int bluetooth_get_profile_restricted(
- const bluetooth_device_address_t *device_address,
- int profile, int *restricted);
-
-/**
* @fn int bluetooth_get_discoverable_mode(bluetooth_discoverable_mode_t *discoverable_mode_ptr)
* @brief Get the visibility mode
*
*/
gboolean bluetooth_is_le_scanning(void);
-gboolean bluetooth_is_scan_filter_supported(void);
+int bluetooth_is_scan_filter_supported(gboolean *is_supported);
/**
* @fn int bluetooth_force_hcidump(int timeout)
int bluetooth_force_hcidump(int timeout);
/**
- * @fn int bluetooth_register_scan_filter(bluetooth_le_scan_filter_t *filter, int *slot_id)
+ * @fn int bluetooth_register_scan_filter(bluetooth_le_scan_filter_t *filter)
* @brief Register scan filter.
*
* This function registers the scan filter.
* @return BLUETOOTH_ERROR_NONE - Success \n
*
* @param[in] filter scan filter to register
- * @param[out] slot_id the slot ID of scan filter
- *
- * @remark None
- */
-int bluetooth_register_scan_filter(bluetooth_le_scan_filter_t *filter, int *slot_id);
-
-/**
- * @fn int bluetooth_unregister_scan_filter(int slot_id)
- * @brief Register scan filter.
- *
- * This function unregisters the scan filter.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- *
- * @param[in] slot_id the slot ID of scan filter
*
* @remark None
*/
-int bluetooth_unregister_scan_filter(int slot_id);
-
-/**
- * @fn int bluetooth_unregister_all_scan_filters(void)
- * @brief Register scan filter.
- *
- * This function usregisters all scan filters.
- *
- * This function is a synchronous call.
- *
- * @return BLUETOOTH_ERROR_NONE - Success \n
- *
- * @remark None
- */
-int bluetooth_unregister_all_scan_filters(void);
+int bluetooth_register_scan_filter(bluetooth_le_scan_filter_t *filter);
/**
* @fn int bluetooth_enable_rssi(const bluetooth_device_address_t *remote_address,
int bluetooth_is_connectable(gboolean *is_connectable);
+int bluetooth_disconnect_device(const bluetooth_device_address_t *device_address);
+
/**
* @fn int bluetooth_bond_device(const bluetooth_device_address_t *device_address)
* @brief Initiate a bonding process
int bluetooth_get_bonded_device(const bluetooth_device_address_t *device_address,
bluetooth_device_info_t *dev_info);
-
/**
* @fn int bluetooth_get_is_alias_set(const bluetooth_device_address_t *device_address,
* gboolean *is_alias_set)
int bluetooth_oob_remove_remote_data(
const bluetooth_device_address_t *remote_device_address);
+
+/**
+ * @fn int bluetooth_le_oob_read_local_data(bt_oob_data_t *local_oob_data)
+ * @brief Read the local Hash and Randmizer.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ *
+ * @exception None
+ * @param[in] None.
+ * @param[out] local_oob_data - Pointer to the local OOB data
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_le_oob_read_local_data(bt_oob_data_t *local_oob_data);
+
+/**
+ * @fn int bluetooth_le_oob_add_remote_data(
+ * const bluetooth_device_address_t *remote_device_address,
+ * bluetooth_bdaddr_type_e address_type,
+ * bt_oob_data_t *oob_data)
+ * @brief Add/updated the remote device Hash and Randmizer.
+ *
+ * This function is a synchronous call.
+ * No event for this api..
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal Error \n
+ *
+ * @exception None
+ * @param[in] remote_device_address - Remote device address
+ * address_type - bdaddr type
+ * remote_oob_data - Ponter to Hash and Randomizer oob data structure
+ *
+ * @remark None
+ * @see None
+ */
+int bluetooth_le_oob_add_remote_data(
+ const bluetooth_device_address_t *remote_device_address,
+ bluetooth_bdaddr_type_e address_type,
+ bt_oob_data_t *remote_oob_data);
+
/**
* @fn int bluetooth_gatt_get_primary_services(const bluetooth_device_address_t *address,
* bt_gatt_handle_info_t *prim_svc);
bt_gatt_service_property_t *service);
/**
- * @fn int bluetooth_gatt_watch_characteristics(const char *service_handle)
+ * @fn int bluetooth_gatt_watch_characteristics(const char *service_handle, const char *svc_name)
*
* @brief Register to GATT based service to receive value change notification/indication.
*
*
* @exception None
* @param[in] service_handle - Handle for remote service.
+ * @param[in] service_name - Friednly name of service uuid.
*
* @remark None
* @see None
*/
-int bluetooth_gatt_watch_characteristics(const char *service_handle);
+int bluetooth_gatt_watch_characteristics(const char *service_handle, const char *svc_name);
/**
* @fn int bluetooth_gatt_unwatch_characteristics(const char *service_handle)
* @see None
*/
int bluetooth_gatt_set_characteristics_value_by_type(const char *char_handle,
- const guint8 *value, int length, guint8 write_type);
+ const guint8 *value, int length,
+ guint8 write_type, gpointer app_data);
/**
* @remark None
* @see None
*/
-int bluetooth_gatt_read_characteristic_value(const char *char_handle);
+int bluetooth_gatt_read_characteristic_value(const char *char_handle, gpointer app_data);
/**
* @fn int bluetooth_gatt_get_service_from_uuid(bluetooth_device_address_t *address,
*/
int bluetooth_gatt_free_desc_property(bt_gatt_char_descriptor_property_t *desc_pty);
+#ifdef TIZEN_GATT_CLIENT
+int bluetooth_connect_le(const bluetooth_device_address_t *device_address,
+ gboolean auto_connect, int client_id);
+#else
int bluetooth_connect_le(const bluetooth_device_address_t *device_address, gboolean auto_connect);
+#endif
+#ifdef TIZEN_GATT_CLIENT
+int bluetooth_disconnect_le(const bluetooth_device_address_t *device_address,
+ int client_id);
+#else
int bluetooth_disconnect_le(const bluetooth_device_address_t *device_address);
+#endif
/**
* @fn int bluetooth_gatt_discover_characteristic_descriptor(const char *characteristic_handle);
* @remark None
* @see None
*/
-int bluetooth_gatt_read_descriptor_value(const char *desc_handle);
+int bluetooth_gatt_read_descriptor_value(const char *desc_handle, gpointer app_data);
/**
* @fn int bluetooth_gatt_write_descriptor_value(const char *desc_handle,
* @see None
*/
int bluetooth_gatt_write_descriptor_value(const char *desc_handle,
- const guint8 *value, int length);
+ const guint8 *value, int length, gpointer app_data);
/* @fn int bluetooth_gatt_init(void)
*
int bluetooth_set_scan_parameters(bluetooth_le_scan_params_t *params);
/**
+ * @fn intbluetooth_set_scan_type(bluetooth_le_scan_type_t scan_type);
+ *ss
+ * @brief Set scan type
+ *
+ * This function is used to set LE scan type
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Success \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is not enabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal IPC error \n
+ *
+ * @exception None
+ * @param[in] scan_type - LE scan type
+ *
+ * @remark None
+ */
+int bluetooth_set_scan_type(bluetooth_le_scan_type_t scan_type);
+
+/**
* @fn int bluetooth_is_advertising(void)
* @brief Check for the advertising is in-progress or not.
*
*
* @remark None
*/
-int bluetooth_otp_write_characteristics_value( const char *handle,
+int bluetooth_otp_write_characteristics_value(const char *handle,
unsigned char *buf, int length);
/**
int bluetooth_otp_disconnect_otc(const bluetooth_device_address_t *device_address);
/**
+ * @fn int bluetooth_is_le_2m_phy_supported(gboolean *is_supported)
+ * @brief Check if Adapter supports LE 2M PHY feature or not.
+ *
+ * This API is used to check the whether LE Adapter supports LE 2M PHY feature, which is introduced
+ * in BT 5.0 specification.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Succeess \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter (NULL buffer) \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error \n
+ * @param[out] is_supported. This boolean variable indicates whether LE 2M PHY is supported or not
+ *
+ * @remark None
+ */
+int bluetooth_is_le_2m_phy_supported(gboolean *is_supported);
+
+/**
+ * @fn int bluetooth_is_le_coded_phy_supported(gboolean *is_supported)
+ * @brief Check if Adapter supports LE 2M CODED feature or not.
+ *
+ * This API is used to check the whether LE Adapter supports LE CODED PHY feature, which is introduced
+ * in BT 5.0 specification.
+ *
+ * This function is a synchronous call.
+ *
+ * @return BLUETOOTH_ERROR_NONE - Succeess \n
+ * BLUETOOTH_ERROR_INVALID_PARAM - Invalid parameter (NULL buffer) \n
+ * BLUETOOTH_ERROR_DEVICE_NOT_ENABLED - Adapter is disabled \n
+ * BLUETOOTH_ERROR_INTERNAL - Internal error \n
+ * @param[out] is_supported. This boolean variable indicates whether LE CODED PHY is supported or not
+ *
+ * @remark None
+ */
+int bluetooth_is_le_coded_phy_supported(gboolean *is_supported);
+
+/**
* @}
*/
projects / platform / core / connectivity / bluetooth-frwk.git / blobdiff