* space.
*/
#if defined(CONFIG_M5272)
-#define MCFUART_BASE1 0x100 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#define MCFUART_BASE1 0x100 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
-#define MCFUART_BASE1 0x180 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#define MCFUART_BASE1 0x180 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
#else
-#define MCFUART_BASE1 0x140 /* Base address of UART1 */
-#define MCFUART_BASE2 0x180 /* Base address of UART2 */
+#define MCFUART_BASE1 0x140 /* Base address of UART1 */
+#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M5282) || defined(CONFIG_M5271)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x240 /* Base address of UART2 */
-#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
#else
-#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
-#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
#endif
#endif
-
/*
* Define the ColdFire UART register set addresses.
*/
-#define MCFUART_UMR 0x00 /* Mode register (r/w) */
-#define MCFUART_USR 0x04 /* Status register (r) */
-#define MCFUART_UCSR 0x04 /* Clock Select (w) */
-#define MCFUART_UCR 0x08 /* Command register (w) */
-#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
-#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
-#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
-#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
-#define MCFUART_UISR 0x14 /* Interrup Status (r) */
-#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
-#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
-#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
+#define MCFUART_UMR 0x00 /* Mode register (r/w) */
+#define MCFUART_USR 0x04 /* Status register (r) */
+#define MCFUART_UCSR 0x04 /* Clock Select (w) */
+#define MCFUART_UCR 0x08 /* Command register (w) */
+#define MCFUART_URB 0x0c /* Receiver Buffer (r) */
+#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */
+#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */
+#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */
+#define MCFUART_UISR 0x14 /* Interrup Status (r) */
+#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */
+#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */
+#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */
#ifdef CONFIG_M5272
-#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
-#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
-#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
+#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
+#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
+#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#else
-#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
+#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
#endif
-#define MCFUART_UIPR 0x34 /* Input Port (r) */
-#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
-#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
+#define MCFUART_UIPR 0x34 /* Input Port (r) */
+#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */
+#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */
#ifdef CONFIG_M5249
/* Note: This isn't in the 5249 docs */
-#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
+#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#endif
/*
* Define bit flags in Mode Register 1 (MR1).
*/
-#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
-#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
-#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
-#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
-#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
-
-#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
-#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
-#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
-#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
-#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
-
-#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
-#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
-#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
-#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
+#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */
+#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */
+#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */
+#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */
+#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */
+
+#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */
+#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */
+#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */
+#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */
+#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */
+
+#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */
+#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */
+#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */
+#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */
/*
* Define bit flags in Mode Register 2 (MR2).
*/
-#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
-#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
-#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
-#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
-#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
+#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */
+#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */
+#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */
+#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */
+#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */
-#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
-#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
-#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
+#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */
+#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */
+#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */
/*
* Define bit flags in Status Register (USR).
*/
-#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
-#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
-#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
-#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
-#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
-#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
-#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
-#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
+#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */
+#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */
+#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */
+#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */
+#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */
+#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */
+#define MCFUART_USR_RXFULL 0x02 /* Receiver full */
+#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */
#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
/*
* Define bit flags in Clock Select Register (UCSR).
*/
-#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
-#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
-#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
+#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */
+#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */
+#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */
-#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
-#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
-#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
+#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */
+#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */
+#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */
/*
* Define bit flags in Command Register (UCR).
#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */
#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */
-#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
-#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
-#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
-#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
-#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
-#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
+#define MCFUART_UCR_TXNULL 0x00 /* No TX command */
+#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */
+#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */
+#define MCFUART_UCR_RXNULL 0x00 /* No RX command */
+#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */
+#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */
/*
* Define bit flags in Input Port Change Register (UIPCR).
*/
-#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
-#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
+#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */
+#define MCFUART_UIPCR_CTS 0x01 /* CTS value */
/*
* Define bit flags in Input Port Register (UIP).
*/
-#define MCFUART_UIPR_CTS 0x01 /* CTS value */
+#define MCFUART_UIPR_CTS 0x01 /* CTS value */
/*
* Define bit flags in Output Port Registers (UOP).
* Clear bit by writing to UOP0, set by writing to UOP1.
*/
-#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
+#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */
/*
* Define bit flags in the Auxiliary Control Register (UACR).
*/
-#define MCFUART_UACR_IEC 0x01 /* Input enable control */
+#define MCFUART_UACR_IEC 0x01 /* Input enable control */
/*
* Define bit flags in Interrupt Status Register (UISR).
* These same bits are used for the Interrupt Mask Register (UIMR).
*/
-#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
-#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
-#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
-#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
+#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */
+#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */
+#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */
+#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */
#ifdef CONFIG_M5272
/*
* Define bit flags in the Transmitter FIFO Register (UTF).
*/
-#define MCFUART_UTF_TXB 0x1f /* transmitter data level */
-#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */
-#define MCFUART_UTF_TXS 0xc0 /* transmitter status */
+#define MCFUART_UTF_TXB 0x1f /* transmitter data level */
+#define MCFUART_UTF_FULL 0x20 /* transmitter fifo full */
+#define MCFUART_UTF_TXS 0xc0 /* transmitter status */
/*
* Define bit flags in the Receiver FIFO Register (URF).
*/
-#define MCFUART_URF_RXB 0x1f /* receiver data level */
-#define MCFUART_URF_FULL 0x20 /* receiver fifo full */
-#define MCFUART_URF_RXS 0xc0 /* receiver status */
+#define MCFUART_URF_RXB 0x1f /* receiver data level */
+#define MCFUART_URF_FULL 0x20 /* receiver fifo full */
+#define MCFUART_URF_RXS 0xc0 /* receiver status */
#endif
+#ifdef CONFIG_MCFUART
+/* UART module registers */
+/* Register read/write struct */
+typedef struct uart {
+ u8 umr; /* 0x00 Mode Register */
+ u8 resv0[0x3];
+ union {
+ u8 usr; /* 0x04 Status Register */
+ u8 ucsr; /* 0x04 Clock Select Register */
+ };
+ u8 resv1[0x3];
+ u8 ucr; /* 0x08 Command Register */
+ u8 resv2[0x3];
+ union {
+ u8 utb; /* 0x0c Transmit Buffer */
+ u8 urb; /* 0x0c Receive Buffer */
+ };
+ u8 resv3[0x3];
+ union {
+ u8 uipcr; /* 0x10 Input Port Change Register */
+ u8 uacr; /* 0x10 Auxiliary Control reg */
+ };
+ u8 resv4[0x3];
+ union {
+ u8 uimr; /* 0x14 Interrupt Mask reg */
+ u8 uisr; /* 0x14 Interrupt Status reg */
+ };
+ u8 resv5[0x3];
+ u8 ubg1; /* 0x18 Counter Timer Upper Register */
+ u8 resv6[0x3];
+ u8 ubg2; /* 0x1c Counter Timer Lower Register */
+ u8 resv7[0x17];
+ u8 uip; /* 0x34 Input Port Register */
+ u8 resv8[0x3];
+ u8 uop1; /* 0x38 Output Port Set Register */
+ u8 resv9[0x3];
+ u8 uop0; /* 0x3c Output Port Reset Register */
+} uart_t;
+
+/*********************************************************************
+* Universal Asynchronous Receiver Transmitter (UART)
+*********************************************************************/
+/* Bit definitions and macros for UMR */
+#define UART_UMR_BC(x) (((x)&0x03))
+#define UART_UMR_PT (0x04)
+#define UART_UMR_PM(x) (((x)&0x03)<<3)
+#define UART_UMR_ERR (0x20)
+#define UART_UMR_RXIRQ (0x40)
+#define UART_UMR_RXRTS (0x80)
+#define UART_UMR_SB(x) (((x)&0x0F))
+#define UART_UMR_TXCTS (0x10) /* Trsnsmit CTS */
+#define UART_UMR_TXRTS (0x20) /* Transmit RTS */
+#define UART_UMR_CM(x) (((x)&0x03)<<6) /* CM bits */
+#define UART_UMR_PM_MULTI_ADDR (0x1C)
+#define UART_UMR_PM_MULTI_DATA (0x18)
+#define UART_UMR_PM_NONE (0x10)
+#define UART_UMR_PM_FORCE_HI (0x0C)
+#define UART_UMR_PM_FORCE_LO (0x08)
+#define UART_UMR_PM_ODD (0x04)
+#define UART_UMR_PM_EVEN (0x00)
+#define UART_UMR_BC_5 (0x00)
+#define UART_UMR_BC_6 (0x01)
+#define UART_UMR_BC_7 (0x02)
+#define UART_UMR_BC_8 (0x03)
+#define UART_UMR_CM_NORMAL (0x00)
+#define UART_UMR_CM_ECH (0x40)
+#define UART_UMR_CM_LOCAL_LOOP (0x80)
+#define UART_UMR_CM_REMOTE_LOOP (0xC0)
+#define UART_UMR_SB_STOP_BITS_1 (0x07)
+#define UART_UMR_SB_STOP_BITS_15 (0x08)
+#define UART_UMR_SB_STOP_BITS_2 (0x0F)
+
+/* Bit definitions and macros for USR */
+#define UART_USR_RXRDY (0x01)
+#define UART_USR_FFULL (0x02)
+#define UART_USR_TXRDY (0x04)
+#define UART_USR_TXEMP (0x08)
+#define UART_USR_OE (0x10)
+#define UART_USR_PE (0x20)
+#define UART_USR_FE (0x40)
+#define UART_USR_RB (0x80)
+
+/* Bit definitions and macros for UCSR */
+#define UART_UCSR_TCS(x) (((x)&0x0F))
+#define UART_UCSR_RCS(x) (((x)&0x0F)<<4)
+#define UART_UCSR_RCS_SYS_CLK (0xD0)
+#define UART_UCSR_RCS_CTM16 (0xE0)
+#define UART_UCSR_RCS_CTM (0xF0)
+#define UART_UCSR_TCS_SYS_CLK (0x0D)
+#define UART_UCSR_TCS_CTM16 (0x0E)
+#define UART_UCSR_TCS_CTM (0x0F)
+
+/* Bit definitions and macros for UCR */
+#define UART_UCR_RXC(x) (((x)&0x03))
+#define UART_UCR_TXC(x) (((x)&0x03)<<2)
+#define UART_UCR_MISC(x) (((x)&0x07)<<4)
+#define UART_UCR_NONE (0x00)
+#define UART_UCR_STOP_BREAK (0x70)
+#define UART_UCR_START_BREAK (0x60)
+#define UART_UCR_BKCHGINT (0x50)
+#define UART_UCR_RESET_ERROR (0x40)
+#define UART_UCR_RESET_TX (0x30)
+#define UART_UCR_RESET_RX (0x20)
+#define UART_UCR_RESET_MR (0x10)
+#define UART_UCR_TX_DISABLED (0x08)
+#define UART_UCR_TX_ENABLED (0x04)
+#define UART_UCR_RX_DISABLED (0x02)
+#define UART_UCR_RX_ENABLED (0x01)
+
+/* Bit definitions and macros for UIPCR */
+#define UART_UIPCR_CTS (0x01)
+#define UART_UIPCR_COS (0x10)
+
+/* Bit definitions and macros for UACR */
+#define UART_UACR_IEC (0x01)
+
+/* Bit definitions and macros for UIMR */
+#define UART_UIMR_TXRDY (0x01)
+#define UART_UIMR_RXRDY_FU (0x02)
+#define UART_UIMR_DB (0x04)
+#define UART_UIMR_COS (0x80)
+
+/* Bit definitions and macros for UISR */
+#define UART_UISR_TXRDY (0x01)
+#define UART_UISR_RXRDY_FU (0x02)
+#define UART_UISR_DB (0x04)
+#define UART_UISR_RXFTO (0x08)
+#define UART_UISR_TXFIFO (0x10)
+#define UART_UISR_RXFIFO (0x20)
+#define UART_UISR_COS (0x80)
+
+/* Bit definitions and macros for UIP */
+#define UART_UIP_CTS (0x01)
+
+/* Bit definitions and macros for UOP1 */
+#define UART_UOP1_RTS (0x01)
+
+/* Bit definitions and macros for UOP0 */
+#define UART_UOP0_RTS (0x01)
+#endif /* CONFIG_MCFUART */
+
/****************************************************************************/
-#endif /* mcfuart_h */
+#endif /* mcfuart_h */
projects / platform / kernel / u-boot.git / blobdiff