* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Note: This file was taken from linux-2.4.19-rmk4-pxa1
- *
- * - 2003/01/20 implementation specifics activated
- * Robert Schwebel <r.schwebel@pengutronix.de>
*/
#ifndef __ASM_ARCH_HARDWARE_H
#include <linux/config.h>
#include <asm/mach-types.h>
-
-/*
- * These are statically mapped PCMCIA IO space for designs using it as a
- * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
- * The actual PCMCIA code is mapping required IO region at run time.
- */
-#define PCMCIA_IO_0_BASE 0xf6000000
-#define PCMCIA_IO_1_BASE 0xf7000000
-
-
/*
* We requires absolute addresses.
*/
#define UNCACHED_ADDR UNCACHED_PHYS_0
/*
- * Intel PXA internal I/O mappings:
+ * Intel PXA2xx internal register mapping:
*
- * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#ifndef CONFIG_CPU_MONAHANS
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#else
+
+/* There are too many IO area needed to map, so I divide them into 3 areas
+ * 0x40000000 - 0x41ffffff <--> 0xf6000000 - 0xf7ffffff Devs
*/
+#define io_p2v(x) ((((x) & 0xfc000000)>>4) + 0xf2000000 + ((x)&0x01ffffff))
+#define io_v2p(x) (((((x) - 0xf2000000)&0xfc000000)<<4) + ((x)&0x01ffffff))
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
+/*
+ * 0x42000000 - 0x421fffff <--> 0xf8000000 - 0xf81fffff MMC2 & USIM2
+ * 0x43000000 - 0x430fffff <--> 0xf8200000 - 0xf82fffff Caddo
+ * 0x43100000 - 0x431fffff <--> 0xf8300000 - 0xf83fffff NAND
+ * 0x44000000 - 0x440fffff <--> 0xf8400000 - 0xf84fffff LCD
+ * 0x46000000 - 0x460fffff <--> 0xf8800000 - 0xf88fffff Mini LCD
+ * 0x48100000 - 0x481fffff <--> 0xf8d00000 - 0xf8dfffff Dynamic Mem Ctl
+ * 0x4a000000 - 0x4a0fffff <--> 0xf9000000 - 0xf90fffff Static Mem Ctl
+ * 0x4c000000 - 0x4c0fffff <--> 0xf9400000 - 0xf94fffff USB Host
+ */
-#ifndef UBOOT_REG_FIX
-#ifndef __ASSEMBLY__
+#define io_p2v_2(x) (((((x) - 0x42000000) & 0xff000000) >> 3) + 0xf8000000\
+ + ((x) & 0x001fffff))
+#define io_v2p_2(x) (((((x) & 0xffe00000) - 0xf8000000) << 3) + 0x42000000\
+ + (x & 0x001fffff))
+/*
+ * 0x50000000 - 0x500fffff <--> 0xfa000000 - 0xfa0fffff Camera Interface
+ * 0x54000000 - 0x540fffff <--> 0xfa400000 - 0xfa4fffff 2D Graphics Ctrl
+ * 0x54100000 - 0x541fffff <--> 0xfa500000 - 0xfa5fffff USB Device 2.0 Ctrl
+ * 0x58000000 - 0x580fffff <--> 0xfa800000 - 0xfa8fffff Internal SRAM Ctrl
+ */
+
+#define io_p2v_3(x) ((((x) & 0xfc000000) >> 4) + 0xf5000000 + \
+ ((x) & 0x001fffff))
+#define io_v2p_3(x) (((((x) - 0xf5000000) & 0x0fc00000) << 4) + \
+ ((x) & 0x001fffff))
+#endif /* CONFIG_CPU_MONAHANS */
-#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
-#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
+#ifndef __ASSEMBLY__
+#if 0
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#else
/*
* This __REG() version gives the same results as the one above, except
* that we are fooling gcc somehow so it generates far better and smaller
typedef struct { volatile u32 offset[4096]; } __regbase;
# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
# define __REG(x) __REGP(io_p2v(x))
-#endif
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+/* __REG_2 is for NAND, LCD etc.
+ * __REG_3 is for Camera Interface, 2D Graphics, U2D etc.*/
+#ifdef CONFIG_CPU_MONAHANS
+#define __REG_2(x) __REGP(io_p2v_2(x))
+#define __REG_3(x) __REGP(io_p2v_3(x))
+
+#endif /* CONFIG_CPU_MONAHANS */
+#endif /* if 0 */
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+ especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
-#else
+#else /* ifndef __ASSEMBLY__ */
# define __REG(x) io_p2v(x)
# define __PREG(x) io_v2p(x)
-# undef io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-# define io_p2v(PhAdd) (PhAdd)
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-# else
-# define __REG(x) (x)
-# endif
-#endif /* UBOOT_REG_FIX */
+#ifdef CONFIG_CPU_MONAHANS
+# define __REG_2(x) io_p2v(x)
+# define __REG_3(x) io_p2v(x)
+#endif /* CONFIG_CPU_MONAHANS */
-#include "pxa-regs.h"
+#endif /* ifndef __ASSEMBLY__ */
#ifndef __ASSEMBLY__
-/*
- * GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * This must be called *before* the corresponding IRQ is registered.
- * Use this instead of directly setting GRER/GFER.
- */
-#define GPIO_FALLING_EDGE 1
-#define GPIO_RISING_EDGE 2
-#define GPIO_BOTH_EDGES 3
-extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
+#ifdef CONFIG_MACH_ZYLONITE
+#include "zylonite.h"
+#endif
/*
* Handy routine to set GPIO alternate functions
*/
-extern void set_GPIO_mode( int gpio_mode );
+extern void pxa_gpio_mode( int gpio_mode );
/*
- * return current lclk frequency in units of 10kHz
+ * Routine to enable or disable CKEN
*/
-extern unsigned int get_lclk_frequency_10khz(void);
-
-#endif
-
+extern void pxa_set_cken(int clock, int enable);
/*
- * Implementation specifics
+ * return current memory and LCD clock frequency in units of 10kHz
*/
+extern unsigned int get_memclk_frequency_10khz(void);
+extern unsigned int get_lcdclk_frequency_10khz(void);
+#endif /* __ASSEMBLY__ */
#ifdef CONFIG_ARCH_LUBBOCK
#include "lubbock.h"
#include "cerf.h"
#endif
+#if CONFIG_CPU_MONAHANS_L2CACHE
+#define __cpuc_flush_l2cache_all xscale_flush_l2cache_all
+extern void __cpuc_flush_l2cache_all(void);
+#define flush_l2cache_all __cpuc_flush_l2cache_all
+#else
+#define __cpuc_flush_l2cache_all() do {} while (0)
+#define flush_l2cache_all() do {} while (0)
+#endif
+
#ifdef CONFIG_ARCH_CSB226
#include "csb226.h"
#endif
#include "pleb.h"
#endif
-#endif /* _ASM_ARCH_HARDWARE_H */
+#ifdef CONFIG_MACH_MAINSTONE
+#include "mainstone.h"
+#endif
+
+#include "pxa-regs.h"
+
+#endif /* _ASM_ARCH_HARDWARE_H */
projects / platform / kernel / u-boot.git / blobdiff