* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#if defined(G_DISABLE_SINGLE_INCLUDES) && !defined (__GLIB_H_INSIDE__) && !defined (GLIB_COMPILATION)
-#error "Only <glib.h> can be included directly."
-#endif
-
#ifndef __G_REGEX_H__
#define __G_REGEX_H__
+#if !defined (__GLIB_H_INSIDE__) && !defined (GLIB_COMPILATION)
+#error "Only <glib.h> can be included directly."
+#endif
+
#include <glib/gerror.h>
#include <glib/gstring.h>
G_BEGIN_DECLS
+/**
+ * GRegexError:
+ * @G_REGEX_ERROR_COMPILE: Compilation of the regular expression failed.
+ * @G_REGEX_ERROR_OPTIMIZE: Optimization of the regular expression failed.
+ * @G_REGEX_ERROR_REPLACE: Replacement failed due to an ill-formed replacement
+ * string.
+ * @G_REGEX_ERROR_MATCH: The match process failed.
+ * @G_REGEX_ERROR_INTERNAL: Internal error of the regular expression engine.
+ * Since 2.16
+ * @G_REGEX_ERROR_STRAY_BACKSLASH: "\\" at end of pattern. Since 2.16
+ * @G_REGEX_ERROR_MISSING_CONTROL_CHAR: "\\c" at end of pattern. Since 2.16
+ * @G_REGEX_ERROR_UNRECOGNIZED_ESCAPE: Unrecognized character follows "\\".
+ * Since 2.16
+ * @G_REGEX_ERROR_QUANTIFIERS_OUT_OF_ORDER: Numbers out of order in "{}"
+ * quantifier. Since 2.16
+ * @G_REGEX_ERROR_QUANTIFIER_TOO_BIG: Number too big in "{}" quantifier.
+ * Since 2.16
+ * @G_REGEX_ERROR_UNTERMINATED_CHARACTER_CLASS: Missing terminating "]" for
+ * character class. Since 2.16
+ * @G_REGEX_ERROR_INVALID_ESCAPE_IN_CHARACTER_CLASS: Invalid escape sequence
+ * in character class. Since 2.16
+ * @G_REGEX_ERROR_RANGE_OUT_OF_ORDER: Range out of order in character class.
+ * Since 2.16
+ * @G_REGEX_ERROR_NOTHING_TO_REPEAT: Nothing to repeat. Since 2.16
+ * @G_REGEX_ERROR_UNRECOGNIZED_CHARACTER: Unrecognized character after "(?",
+ * "(?<" or "(?P". Since 2.16
+ * @G_REGEX_ERROR_POSIX_NAMED_CLASS_OUTSIDE_CLASS: POSIX named classes are
+ * supported only within a class. Since 2.16
+ * @G_REGEX_ERROR_UNMATCHED_PARENTHESIS: Missing terminating ")" or ")"
+ * without opening "(". Since 2.16
+ * @G_REGEX_ERROR_INEXISTENT_SUBPATTERN_REFERENCE: Reference to non-existent
+ * subpattern. Since 2.16
+ * @G_REGEX_ERROR_UNTERMINATED_COMMENT: Missing terminating ")" after comment.
+ * Since 2.16
+ * @G_REGEX_ERROR_EXPRESSION_TOO_LARGE: Regular expression too large.
+ * Since 2.16
+ * @G_REGEX_ERROR_MEMORY_ERROR: Failed to get memory. Since 2.16
+ * @G_REGEX_ERROR_VARIABLE_LENGTH_LOOKBEHIND: Lookbehind assertion is not
+ * fixed length. Since 2.16
+ * @G_REGEX_ERROR_MALFORMED_CONDITION: Malformed number or name after "(?(".
+ * Since 2.16
+ * @G_REGEX_ERROR_TOO_MANY_CONDITIONAL_BRANCHES: Conditional group contains
+ * more than two branches. Since 2.16
+ * @G_REGEX_ERROR_ASSERTION_EXPECTED: Assertion expected after "(?(".
+ * Since 2.16
+ * @G_REGEX_ERROR_UNKNOWN_POSIX_CLASS_NAME: Unknown POSIX class name.
+ * Since 2.16
+ * @G_REGEX_ERROR_POSIX_COLLATING_ELEMENTS_NOT_SUPPORTED: POSIX collating
+ * elements are not supported. Since 2.16
+ * @G_REGEX_ERROR_HEX_CODE_TOO_LARGE: Character value in "\\x{...}" sequence
+ * is too large. Since 2.16
+ * @G_REGEX_ERROR_INVALID_CONDITION: Invalid condition "(?(0)". Since 2.16
+ * @G_REGEX_ERROR_SINGLE_BYTE_MATCH_IN_LOOKBEHIND: \\C not allowed in
+ * lookbehind assertion. Since 2.16
+ * @G_REGEX_ERROR_INFINITE_LOOP: Recursive call could loop indefinitely.
+ * Since 2.16
+ * @G_REGEX_ERROR_MISSING_SUBPATTERN_NAME_TERMINATOR: Missing terminator
+ * in subpattern name. Since 2.16
+ * @G_REGEX_ERROR_DUPLICATE_SUBPATTERN_NAME: Two named subpatterns have
+ * the same name. Since 2.16
+ * @G_REGEX_ERROR_MALFORMED_PROPERTY: Malformed "\\P" or "\\p" sequence.
+ * Since 2.16
+ * @G_REGEX_ERROR_UNKNOWN_PROPERTY: Unknown property name after "\\P" or
+ * "\\p". Since 2.16
+ * @G_REGEX_ERROR_SUBPATTERN_NAME_TOO_LONG: Subpattern name is too long
+ * (maximum 32 characters). Since 2.16
+ * @G_REGEX_ERROR_TOO_MANY_SUBPATTERNS: Too many named subpatterns (maximum
+ * 10,000). Since 2.16
+ * @G_REGEX_ERROR_INVALID_OCTAL_VALUE: Octal value is greater than "\\377".
+ * Since 2.16
+ * @G_REGEX_ERROR_TOO_MANY_BRANCHES_IN_DEFINE: "DEFINE" group contains more
+ * than one branch. Since 2.16
+ * @G_REGEX_ERROR_DEFINE_REPETION: Repeating a "DEFINE" group is not allowed.
+ * This error is never raised. Since: 2.16 Deprecated: 2.34
+ * @G_REGEX_ERROR_INCONSISTENT_NEWLINE_OPTIONS: Inconsistent newline options.
+ * Since 2.16
+ * @G_REGEX_ERROR_MISSING_BACK_REFERENCE: "\\g" is not followed by a braced,
+ * angle-bracketed, or quoted name or number, or by a plain number. Since: 2.16
+ * @G_REGEX_ERROR_INVALID_RELATIVE_REFERENCE: relative reference must not be zero. Since: 2.34
+ * @G_REGEX_ERROR_BACKTRACKING_CONTROL_VERB_ARGUMENT_FORBIDDEN: the backtracing
+ * control verb used does not allow an argument. Since: 2.34
+ * @G_REGEX_ERROR_UNKNOWN_BACKTRACKING_CONTROL_VERB: unknown backtracing
+ * control verb. Since: 2.34
+ * @G_REGEX_ERROR_NUMBER_TOO_BIG: number is too big in escape sequence. Since: 2.34
+ * @G_REGEX_ERROR_MISSING_SUBPATTERN_NAME: Missing subpattern name. Since: 2.34
+ * @G_REGEX_ERROR_MISSING_DIGIT: Missing digit. Since 2.34
+ * @G_REGEX_ERROR_INVALID_DATA_CHARACTER: In JavaScript compatibility mode,
+ * "[" is an invalid data character. Since: 2.34
+ * @G_REGEX_ERROR_EXTRA_SUBPATTERN_NAME: different names for subpatterns of the
+ * same number are not allowed. Since: 2.34
+ * @G_REGEX_ERROR_BACKTRACKING_CONTROL_VERB_ARGUMENT_REQUIRED: the backtracing control
+ * verb requires an argument. Since: 2.34
+ * @G_REGEX_ERROR_INVALID_CONTROL_CHAR: "\\c" must be followed by an ASCII
+ * character. Since: 2.34
+ * @G_REGEX_ERROR_MISSING_NAME: "\\k" is not followed by a braced, angle-bracketed, or
+ * quoted name. Since: 2.34
+ * @G_REGEX_ERROR_NOT_SUPPORTED_IN_CLASS: "\\N" is not supported in a class. Since: 2.34
+ * @G_REGEX_ERROR_TOO_MANY_FORWARD_REFERENCES: too many forward references. Since: 2.34
+ * @G_REGEX_ERROR_NAME_TOO_LONG: the name is too long in "(*MARK)", "(*PRUNE)",
+ * "(*SKIP)", or "(*THEN)". Since: 2.34
+ * @G_REGEX_ERROR_CHARACTER_VALUE_TOO_LARGE: the character value in the \\u sequence is
+ * too large. Since: 2.34
+ *
+ * Error codes returned by regular expressions functions.
+ *
+ * Since: 2.14
+ */
typedef enum
{
G_REGEX_ERROR_COMPILE,
G_REGEX_ERROR_TOO_MANY_BRANCHES_IN_DEFINE = 154,
G_REGEX_ERROR_DEFINE_REPETION = 155,
G_REGEX_ERROR_INCONSISTENT_NEWLINE_OPTIONS = 156,
- G_REGEX_ERROR_MISSING_BACK_REFERENCE = 157
+ G_REGEX_ERROR_MISSING_BACK_REFERENCE = 157,
+ G_REGEX_ERROR_INVALID_RELATIVE_REFERENCE = 158,
+ G_REGEX_ERROR_BACKTRACKING_CONTROL_VERB_ARGUMENT_FORBIDDEN = 159,
+ G_REGEX_ERROR_UNKNOWN_BACKTRACKING_CONTROL_VERB = 160,
+ G_REGEX_ERROR_NUMBER_TOO_BIG = 161,
+ G_REGEX_ERROR_MISSING_SUBPATTERN_NAME = 162,
+ G_REGEX_ERROR_MISSING_DIGIT = 163,
+ G_REGEX_ERROR_INVALID_DATA_CHARACTER = 164,
+ G_REGEX_ERROR_EXTRA_SUBPATTERN_NAME = 165,
+ G_REGEX_ERROR_BACKTRACKING_CONTROL_VERB_ARGUMENT_REQUIRED = 166,
+ G_REGEX_ERROR_INVALID_CONTROL_CHAR = 168,
+ G_REGEX_ERROR_MISSING_NAME = 169,
+ G_REGEX_ERROR_NOT_SUPPORTED_IN_CLASS = 171,
+ G_REGEX_ERROR_TOO_MANY_FORWARD_REFERENCES = 172,
+ G_REGEX_ERROR_NAME_TOO_LONG = 175,
+ G_REGEX_ERROR_CHARACTER_VALUE_TOO_LARGE = 176
} GRegexError;
+/**
+ * G_REGEX_ERROR:
+ *
+ * Error domain for regular expressions. Errors in this domain will be
+ * from the #GRegexError enumeration. See #GError for information on
+ * error domains.
+ *
+ * Since: 2.14
+ */
#define G_REGEX_ERROR g_regex_error_quark ()
+GLIB_AVAILABLE_IN_ALL
GQuark g_regex_error_quark (void);
+/**
+ * GRegexCompileFlags:
+ * @G_REGEX_CASELESS: Letters in the pattern match both upper- and
+ * lowercase letters. This option can be changed within a pattern
+ * by a "(?i)" option setting.
+ * @G_REGEX_MULTILINE: By default, GRegex treats the strings as consisting
+ * of a single line of characters (even if it actually contains
+ * newlines). The "start of line" metacharacter ("^") matches only
+ * at the start of the string, while the "end of line" metacharacter
+ * ("$") matches only at the end of the string, or before a terminating
+ * newline (unless #G_REGEX_DOLLAR_ENDONLY is set). When
+ * #G_REGEX_MULTILINE is set, the "start of line" and "end of line"
+ * constructs match immediately following or immediately before any
+ * newline in the string, respectively, as well as at the very start
+ * and end. This can be changed within a pattern by a "(?m)" option
+ * setting.
+ * @G_REGEX_DOTALL: A dot metacharater (".") in the pattern matches all
+ * characters, including newlines. Without it, newlines are excluded.
+ * This option can be changed within a pattern by a ("?s") option setting.
+ * @G_REGEX_EXTENDED: Whitespace data characters in the pattern are
+ * totally ignored except when escaped or inside a character class.
+ * Whitespace does not include the VT character (code 11). In addition,
+ * characters between an unescaped "#" outside a character class and
+ * the next newline character, inclusive, are also ignored. This can
+ * be changed within a pattern by a "(?x)" option setting.
+ * @G_REGEX_ANCHORED: The pattern is forced to be "anchored", that is,
+ * it is constrained to match only at the first matching point in the
+ * string that is being searched. This effect can also be achieved by
+ * appropriate constructs in the pattern itself such as the "^"
+ * metacharater.
+ * @G_REGEX_DOLLAR_ENDONLY: A dollar metacharacter ("$") in the pattern
+ * matches only at the end of the string. Without this option, a
+ * dollar also matches immediately before the final character if
+ * it is a newline (but not before any other newlines). This option
+ * is ignored if #G_REGEX_MULTILINE is set.
+ * @G_REGEX_UNGREEDY: Inverts the "greediness" of the quantifiers so that
+ * they are not greedy by default, but become greedy if followed by "?".
+ * It can also be set by a "(?U)" option setting within the pattern.
+ * @G_REGEX_RAW: Usually strings must be valid UTF-8 strings, using this
+ * flag they are considered as a raw sequence of bytes.
+ * @G_REGEX_NO_AUTO_CAPTURE: Disables the use of numbered capturing
+ * parentheses in the pattern. Any opening parenthesis that is not
+ * followed by "?" behaves as if it were followed by "?:" but named
+ * parentheses can still be used for capturing (and they acquire numbers
+ * in the usual way).
+ * @G_REGEX_OPTIMIZE: Optimize the regular expression. If the pattern will
+ * be used many times, then it may be worth the effort to optimize it
+ * to improve the speed of matches.
+ * @G_REGEX_FIRSTLINE: Limits an unanchored pattern to match before (or at) the
+ * first newline. Since: 2.34
+ * @G_REGEX_DUPNAMES: Names used to identify capturing subpatterns need not
+ * be unique. This can be helpful for certain types of pattern when it
+ * is known that only one instance of the named subpattern can ever be
+ * matched.
+ * @G_REGEX_NEWLINE_CR: Usually any newline character or character sequence is
+ * recognized. If this option is set, the only recognized newline character
+ * is '\r'.
+ * @G_REGEX_NEWLINE_LF: Usually any newline character or character sequence is
+ * recognized. If this option is set, the only recognized newline character
+ * is '\n'.
+ * @G_REGEX_NEWLINE_CRLF: Usually any newline character or character sequence is
+ * recognized. If this option is set, the only recognized newline character
+ * sequence is '\r\n'.
+ * @G_REGEX_NEWLINE_ANYCRLF: Usually any newline character or character sequence
+ * is recognized. If this option is set, the only recognized newline character
+ * sequences are '\r', '\n', and '\r\n'. Since: 2.34
+ * @G_REGEX_BSR_ANYCRLF: Usually any newline character or character sequence
+ * is recognised. If this option is set, then "\R" only recognizes the newline
+ * characters '\r', '\n' and '\r\n'. Since: 2.34
+ * @G_REGEX_JAVASCRIPT_COMPAT: Changes behaviour so that it is compatible with
+ * JavaScript rather than PCRE. Since: 2.34
+ *
+ * Flags specifying compile-time options.
+ *
+ * Since: 2.14
+ */
/* Remember to update G_REGEX_COMPILE_MASK in gregex.c after
- * adding a new flag. */
+ * adding a new flag.
+ */
typedef enum
{
G_REGEX_CASELESS = 1 << 0,
G_REGEX_RAW = 1 << 11,
G_REGEX_NO_AUTO_CAPTURE = 1 << 12,
G_REGEX_OPTIMIZE = 1 << 13,
+ G_REGEX_FIRSTLINE = 1 << 18,
G_REGEX_DUPNAMES = 1 << 19,
G_REGEX_NEWLINE_CR = 1 << 20,
G_REGEX_NEWLINE_LF = 1 << 21,
- G_REGEX_NEWLINE_CRLF = G_REGEX_NEWLINE_CR | G_REGEX_NEWLINE_LF
+ G_REGEX_NEWLINE_CRLF = G_REGEX_NEWLINE_CR | G_REGEX_NEWLINE_LF,
+ G_REGEX_NEWLINE_ANYCRLF = G_REGEX_NEWLINE_CR | 1 << 22,
+ G_REGEX_BSR_ANYCRLF = 1 << 23,
+ G_REGEX_JAVASCRIPT_COMPAT = 1 << 25
} GRegexCompileFlags;
+/**
+ * GRegexMatchFlags:
+ * @G_REGEX_MATCH_ANCHORED: The pattern is forced to be "anchored", that is,
+ * it is constrained to match only at the first matching point in the
+ * string that is being searched. This effect can also be achieved by
+ * appropriate constructs in the pattern itself such as the "^"
+ * metacharater.
+ * @G_REGEX_MATCH_NOTBOL: Specifies that first character of the string is
+ * not the beginning of a line, so the circumflex metacharacter should
+ * not match before it. Setting this without #G_REGEX_MULTILINE (at
+ * compile time) causes circumflex never to match. This option affects
+ * only the behaviour of the circumflex metacharacter, it does not
+ * affect "\A".
+ * @G_REGEX_MATCH_NOTEOL: Specifies that the end of the subject string is
+ * not the end of a line, so the dollar metacharacter should not match
+ * it nor (except in multiline mode) a newline immediately before it.
+ * Setting this without #G_REGEX_MULTILINE (at compile time) causes
+ * dollar never to match. This option affects only the behaviour of
+ * the dollar metacharacter, it does not affect "\Z" or "\z".
+ * @G_REGEX_MATCH_NOTEMPTY: An empty string is not considered to be a valid
+ * match if this option is set. If there are alternatives in the pattern,
+ * they are tried. If all the alternatives match the empty string, the
+ * entire match fails. For example, if the pattern "a?b?" is applied to
+ * a string not beginning with "a" or "b", it matches the empty string
+ * at the start of the string. With this flag set, this match is not
+ * valid, so GRegex searches further into the string for occurrences
+ * of "a" or "b".
+ * @G_REGEX_MATCH_PARTIAL: Turns on the partial matching feature, for more
+ * documentation on partial matching see g_match_info_is_partial_match().
+ * @G_REGEX_MATCH_NEWLINE_CR: Overrides the newline definition set when
+ * creating a new #GRegex, setting the '\r' character as line terminator.
+ * @G_REGEX_MATCH_NEWLINE_LF: Overrides the newline definition set when
+ * creating a new #GRegex, setting the '\n' character as line terminator.
+ * @G_REGEX_MATCH_NEWLINE_CRLF: Overrides the newline definition set when
+ * creating a new #GRegex, setting the '\r\n' characters sequence as line terminator.
+ * @G_REGEX_MATCH_NEWLINE_ANY: Overrides the newline definition set when
+ * creating a new #GRegex, any Unicode newline sequence
+ * is recognised as a newline. These are '\r', '\n' and '\rn', and the
+ * single characters U+000B LINE TABULATION, U+000C FORM FEED (FF),
+ * U+0085 NEXT LINE (NEL), U+2028 LINE SEPARATOR and
+ * U+2029 PARAGRAPH SEPARATOR.
+ * @G_REGEX_MATCH_NEWLINE_ANYCRLF: Overrides the newline definition set when
+ * creating a new #GRegex; any '\r', '\n', or '\r\n' character sequence
+ * is recognized as a newline. Since: 2.34
+ * @G_REGEX_MATCH_BSR_ANYCRLF: Overrides the newline definition for "\R" set when
+ * creating a new #GRegex; only '\r', '\n', or '\r\n' character sequences
+ * are recognized as a newline by "\R". Since: 2.34
+ * @G_REGEX_MATCH_BSR_ANY: Overrides the newline definition for "\R" set when
+ * creating a new #GRegex; any Unicode newline character or character sequence
+ * are recognized as a newline by "\R". These are '\r', '\n' and '\rn', and the
+ * single characters U+000B LINE TABULATION, U+000C FORM FEED (FF),
+ * U+0085 NEXT LINE (NEL), U+2028 LINE SEPARATOR and
+ * U+2029 PARAGRAPH SEPARATOR. Since: 2.34
+ * @G_REGEX_MATCH_PARTIAL_SOFT: An alias for #G_REGEX_MATCH_PARTIAL. Since: 2.34
+ * @G_REGEX_MATCH_PARTIAL_HARD: Turns on the partial matching feature. In contrast to
+ * to #G_REGEX_MATCH_PARTIAL_SOFT, this stops matching as soon as a partial match
+ * is found, without continuing to search for a possible complete match. See
+ * g_match_info_is_partial_match() for more information. Since: 2.34
+ * @G_REGEX_MATCH_NOTEMPTY_ATSTART: Like #G_REGEX_MATCH_NOTEMPTY, but only applied to
+ * the start of the matched string. For anchored
+ * patterns this can only happen for pattern containing "\K". Since: 2.34
+ *
+ * Flags specifying match-time options.
+ *
+ * Since: 2.14
+ */
/* Remember to update G_REGEX_MATCH_MASK in gregex.c after
* adding a new flag. */
typedef enum
{
- G_REGEX_MATCH_ANCHORED = 1 << 4,
- G_REGEX_MATCH_NOTBOL = 1 << 7,
- G_REGEX_MATCH_NOTEOL = 1 << 8,
- G_REGEX_MATCH_NOTEMPTY = 1 << 10,
- G_REGEX_MATCH_PARTIAL = 1 << 15,
- G_REGEX_MATCH_NEWLINE_CR = 1 << 20,
- G_REGEX_MATCH_NEWLINE_LF = 1 << 21,
- G_REGEX_MATCH_NEWLINE_CRLF = G_REGEX_MATCH_NEWLINE_CR | G_REGEX_MATCH_NEWLINE_LF,
- G_REGEX_MATCH_NEWLINE_ANY = 1 << 22
+ G_REGEX_MATCH_ANCHORED = 1 << 4,
+ G_REGEX_MATCH_NOTBOL = 1 << 7,
+ G_REGEX_MATCH_NOTEOL = 1 << 8,
+ G_REGEX_MATCH_NOTEMPTY = 1 << 10,
+ G_REGEX_MATCH_PARTIAL = 1 << 15,
+ G_REGEX_MATCH_NEWLINE_CR = 1 << 20,
+ G_REGEX_MATCH_NEWLINE_LF = 1 << 21,
+ G_REGEX_MATCH_NEWLINE_CRLF = G_REGEX_MATCH_NEWLINE_CR | G_REGEX_MATCH_NEWLINE_LF,
+ G_REGEX_MATCH_NEWLINE_ANY = 1 << 22,
+ G_REGEX_MATCH_NEWLINE_ANYCRLF = G_REGEX_MATCH_NEWLINE_CR | G_REGEX_MATCH_NEWLINE_ANY,
+ G_REGEX_MATCH_BSR_ANYCRLF = 1 << 23,
+ G_REGEX_MATCH_BSR_ANY = 1 << 24,
+ G_REGEX_MATCH_PARTIAL_SOFT = G_REGEX_MATCH_PARTIAL,
+ G_REGEX_MATCH_PARTIAL_HARD = 1 << 27,
+ G_REGEX_MATCH_NOTEMPTY_ATSTART = 1 << 28
} GRegexMatchFlags;
+/**
+ * GRegex:
+ *
+ * A GRegex is the "compiled" form of a regular expression pattern.
+ * This structure is opaque and its fields cannot be accessed directly.
+ *
+ * Since: 2.14
+ */
typedef struct _GRegex GRegex;
+
+
+/**
+ * GMatchInfo:
+ *
+ * A GMatchInfo is an opaque struct used to return information about
+ * matches.
+ */
typedef struct _GMatchInfo GMatchInfo;
+/**
+ * GRegexEvalCallback:
+ * @match_info: the #GMatchInfo generated by the match.
+ * Use g_match_info_get_regex() and g_match_info_get_string() if you
+ * need the #GRegex or the matched string.
+ * @result: a #GString containing the new string
+ * @user_data: user data passed to g_regex_replace_eval()
+ *
+ * Specifies the type of the function passed to g_regex_replace_eval().
+ * It is called for each occurrence of the pattern in the string passed
+ * to g_regex_replace_eval(), and it should append the replacement to
+ * @result.
+ *
+ * Returns: %FALSE to continue the replacement process, %TRUE to stop it
+ *
+ * Since: 2.14
+ */
typedef gboolean (*GRegexEvalCallback) (const GMatchInfo *match_info,
GString *result,
gpointer user_data);
+GLIB_AVAILABLE_IN_ALL
GRegex *g_regex_new (const gchar *pattern,
GRegexCompileFlags compile_options,
GRegexMatchFlags match_options,
GError **error);
+GLIB_AVAILABLE_IN_ALL
GRegex *g_regex_ref (GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
void g_regex_unref (GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
const gchar *g_regex_get_pattern (const GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
gint g_regex_get_max_backref (const GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
gint g_regex_get_capture_count (const GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
+gboolean g_regex_get_has_cr_or_lf (const GRegex *regex);
+GLIB_AVAILABLE_IN_2_38
+gint g_regex_get_max_lookbehind (const GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
gint g_regex_get_string_number (const GRegex *regex,
const gchar *name);
+GLIB_AVAILABLE_IN_ALL
gchar *g_regex_escape_string (const gchar *string,
gint length);
+GLIB_AVAILABLE_IN_ALL
+gchar *g_regex_escape_nul (const gchar *string,
+ gint length);
+
+GLIB_AVAILABLE_IN_ALL
+GRegexCompileFlags g_regex_get_compile_flags (const GRegex *regex);
+GLIB_AVAILABLE_IN_ALL
+GRegexMatchFlags g_regex_get_match_flags (const GRegex *regex);
/* Matching. */
+GLIB_AVAILABLE_IN_ALL
gboolean g_regex_match_simple (const gchar *pattern,
const gchar *string,
GRegexCompileFlags compile_options,
GRegexMatchFlags match_options);
+GLIB_AVAILABLE_IN_ALL
gboolean g_regex_match (const GRegex *regex,
const gchar *string,
GRegexMatchFlags match_options,
GMatchInfo **match_info);
+GLIB_AVAILABLE_IN_ALL
gboolean g_regex_match_full (const GRegex *regex,
const gchar *string,
gssize string_len,
GRegexMatchFlags match_options,
GMatchInfo **match_info,
GError **error);
+GLIB_AVAILABLE_IN_ALL
gboolean g_regex_match_all (const GRegex *regex,
const gchar *string,
GRegexMatchFlags match_options,
GMatchInfo **match_info);
+GLIB_AVAILABLE_IN_ALL
gboolean g_regex_match_all_full (const GRegex *regex,
const gchar *string,
gssize string_len,
GError **error);
/* String splitting. */
+GLIB_AVAILABLE_IN_ALL
gchar **g_regex_split_simple (const gchar *pattern,
const gchar *string,
GRegexCompileFlags compile_options,
GRegexMatchFlags match_options);
+GLIB_AVAILABLE_IN_ALL
gchar **g_regex_split (const GRegex *regex,
const gchar *string,
GRegexMatchFlags match_options);
+GLIB_AVAILABLE_IN_ALL
gchar **g_regex_split_full (const GRegex *regex,
const gchar *string,
gssize string_len,
GError **error);
/* String replacement. */
+GLIB_AVAILABLE_IN_ALL
gchar *g_regex_replace (const GRegex *regex,
const gchar *string,
gssize string_len,
const gchar *replacement,
GRegexMatchFlags match_options,
GError **error);
+GLIB_AVAILABLE_IN_ALL
gchar *g_regex_replace_literal (const GRegex *regex,
const gchar *string,
gssize string_len,
const gchar *replacement,
GRegexMatchFlags match_options,
GError **error);
+GLIB_AVAILABLE_IN_ALL
gchar *g_regex_replace_eval (const GRegex *regex,
const gchar *string,
gssize string_len,
GRegexEvalCallback eval,
gpointer user_data,
GError **error);
+GLIB_AVAILABLE_IN_ALL
gboolean g_regex_check_replacement (const gchar *replacement,
gboolean *has_references,
GError **error);
/* Match info */
+GLIB_AVAILABLE_IN_ALL
GRegex *g_match_info_get_regex (const GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
const gchar *g_match_info_get_string (const GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
+GMatchInfo *g_match_info_ref (GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
+void g_match_info_unref (GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
void g_match_info_free (GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
gboolean g_match_info_next (GMatchInfo *match_info,
GError **error);
+GLIB_AVAILABLE_IN_ALL
gboolean g_match_info_matches (const GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
gint g_match_info_get_match_count (const GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
gboolean g_match_info_is_partial_match (const GMatchInfo *match_info);
+GLIB_AVAILABLE_IN_ALL
gchar *g_match_info_expand_references(const GMatchInfo *match_info,
const gchar *string_to_expand,
GError **error);
+GLIB_AVAILABLE_IN_ALL
gchar *g_match_info_fetch (const GMatchInfo *match_info,
gint match_num);
+GLIB_AVAILABLE_IN_ALL
gboolean g_match_info_fetch_pos (const GMatchInfo *match_info,
gint match_num,
gint *start_pos,
gint *end_pos);
+GLIB_AVAILABLE_IN_ALL
gchar *g_match_info_fetch_named (const GMatchInfo *match_info,
const gchar *name);
+GLIB_AVAILABLE_IN_ALL
gboolean g_match_info_fetch_named_pos (const GMatchInfo *match_info,
const gchar *name,
gint *start_pos,
gint *end_pos);
+GLIB_AVAILABLE_IN_ALL
gchar **g_match_info_fetch_all (const GMatchInfo *match_info);
G_END_DECLS
projects / platform / upstream / glib.git / blobdiff