* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General
- * Public License along with this library; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place, Suite 330,
- * Boston, MA 02111-1307, USA.
+ * Public License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
* Author: Alexander Larsson <alexl@redhat.com>
*/
+#ifndef __GIO_ENUMS_H__
+#define __GIO_ENUMS_H__
+
#if !defined (__GIO_GIO_H_INSIDE__) && !defined (GIO_COMPILATION)
#error "Only <gio/gio.h> can be included directly."
#endif
-#ifndef __GIO_ENUMS_H__
-#define __GIO_ENUMS_H__
-
#include <glib-object.h>
G_BEGIN_DECLS
G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1)
} GFileCreateFlags;
+/**
+ * GFileMeasureFlags:
+ * @G_FILE_MEASURE_NONE: No flags set.
+ * @G_FILE_MEASURE_REPORT_ANY_ERROR: Report any error encountered
+ * while traversing the directory tree. Normally errors are only
+ * reported for the toplevel file.
+ * @G_FILE_MEASURE_APPARENT_SIZE: Tally usage based on apparent file
+ * sizes. Normally, the block-size is used, if available, as this is a
+ * more accurate representation of disk space used.
+ * Compare with `du --apparent-size`.
+ * @G_FILE_MEASURE_NO_XDEV: Do not cross mount point boundaries.
+ * Compare with `du -x`.
+ *
+ * Flags that can be used with g_file_measure_disk_usage().
+ *
+ * Since: 2.38
+ **/
+typedef enum {
+ G_FILE_MEASURE_NONE = 0,
+ G_FILE_MEASURE_REPORT_ANY_ERROR = (1 << 1),
+ G_FILE_MEASURE_APPARENT_SIZE = (1 << 2),
+ G_FILE_MEASURE_NO_XDEV = (1 << 3)
+} GFileMeasureFlags;
/**
* GMountMountFlags:
* event instead (NB: not supported on all backends; the default
* behaviour -without specifying this flag- is to send single DELETED
* and CREATED events).
+ * @G_FILE_MONITOR_WATCH_HARD_LINKS: Watch for changes to the file made
+ * via another hard link. Since 2.36.
*
* Flags used to set what a #GFileMonitor will watch for.
*/
typedef enum {
- G_FILE_MONITOR_NONE = 0,
- G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
- G_FILE_MONITOR_SEND_MOVED = (1 << 1)
+ G_FILE_MONITOR_NONE = 0,
+ G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
+ G_FILE_MONITOR_SEND_MOVED = (1 << 1),
+ G_FILE_MONITOR_WATCH_HARD_LINKS = (1 << 2)
} GFileMonitorFlags;
*/
/**
* GIOErrorEnum:
- * @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
+ * @G_IO_ERROR_FAILED: Generic error condition for when an operation fails
+ * and no more specific #GIOErrorEnum value is defined.
* @G_IO_ERROR_NOT_FOUND: File not found.
* @G_IO_ERROR_EXISTS: File already exists.
* @G_IO_ERROR_IS_DIRECTORY: File is a directory.
* @G_IO_ERROR_NO_SPACE: No space left on drive.
* @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument.
* @G_IO_ERROR_PERMISSION_DENIED: Permission denied.
- * @G_IO_ERROR_NOT_SUPPORTED: Operation not supported for the current backend.
+ * @G_IO_ERROR_NOT_SUPPORTED: Operation (or one of its parameters) not supported
* @G_IO_ERROR_NOT_MOUNTED: File isn't mounted.
* @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted.
* @G_IO_ERROR_CLOSED: File was closed.
* @G_IO_ERROR_NOT_INITIALIZED: The object has not been initialized. Since 2.22
* @G_IO_ERROR_ADDRESS_IN_USE: The requested address is already in use. Since 2.22
* @G_IO_ERROR_PARTIAL_INPUT: Need more input to finish operation. Since 2.24
- * @G_IO_ERROR_INVALID_DATA: There input data was invalid. Since 2.24
+ * @G_IO_ERROR_INVALID_DATA: The input data was invalid. Since 2.24
* @G_IO_ERROR_DBUS_ERROR: A remote object generated an error that
* doesn't correspond to a locally registered #GError error
* domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
* @G_IO_ERROR_PROXY_NEED_AUTH: Proxy server needs authentication. Since 2.26
* @G_IO_ERROR_PROXY_NOT_ALLOWED: Proxy connection is not allowed by ruleset.
* Since 2.26
+ * @G_IO_ERROR_BROKEN_PIPE: Broken pipe. Since 2.36
+ * @G_IO_ERROR_CONNECTION_CLOSED: Connection closed by peer. Note that this
+ * is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some
+ * "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others
+ * returned %G_IO_ERROR_FAILED. Now they should all return the same
+ * value, which has this more logical name. Since 2.44.
+ * @G_IO_ERROR_NOT_CONNECTED: Transport endpoint is not connected. Since 2.44
*
* Error codes returned by GIO functions.
*
+ * Note that this domain may be extended in future GLib releases. In
+ * general, new error codes either only apply to new APIs, or else
+ * replace %G_IO_ERROR_FAILED in cases that were not explicitly
+ * distinguished before. You should therefore avoid writing code like
+ * |[<!-- language="C" -->
+ * if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED))
+ * {
+ * // Assume that this is EPRINTERONFIRE
+ * ...
+ * }
+ * ]|
+ * but should instead treat all unrecognized error codes the same as
+ * #G_IO_ERROR_FAILED.
**/
typedef enum {
G_IO_ERROR_FAILED,
G_IO_ERROR_PROXY_FAILED,
G_IO_ERROR_PROXY_AUTH_FAILED,
G_IO_ERROR_PROXY_NEED_AUTH,
- G_IO_ERROR_PROXY_NOT_ALLOWED
+ G_IO_ERROR_PROXY_NOT_ALLOWED,
+ G_IO_ERROR_BROKEN_PIPE,
+ G_IO_ERROR_CONNECTION_CLOSED = G_IO_ERROR_BROKEN_PIPE,
+ G_IO_ERROR_NOT_CONNECTED
} GIOErrorEnum;
} GResolverError;
/**
+ * GResolverRecordType:
+ * @G_RESOLVER_RECORD_SRV: lookup DNS SRV records for a domain
+ * @G_RESOLVER_RECORD_MX: lookup DNS MX records for a domain
+ * @G_RESOLVER_RECORD_TXT: lookup DNS TXT records for a name
+ * @G_RESOLVER_RECORD_SOA: lookup DNS SOA records for a zone
+ * @G_RESOLVER_RECORD_NS: lookup DNS NS records for a domain
+ *
+ * The type of record that g_resolver_lookup_records() or
+ * g_resolver_lookup_records_async() should retrieve. The records are returned
+ * as lists of #GVariant tuples. Each record type has different values in
+ * the variant tuples returned.
+ *
+ * %G_RESOLVER_RECORD_SRV records are returned as variants with the signature
+ * '(qqqs)', containing a guint16 with the priority, a guint16 with the
+ * weight, a guint16 with the port, and a string of the hostname.
+ *
+ * %G_RESOLVER_RECORD_MX records are returned as variants with the signature
+ * '(qs)', representing a guint16 with the preference, and a string containing
+ * the mail exchanger hostname.
+ *
+ * %G_RESOLVER_RECORD_TXT records are returned as variants with the signature
+ * '(as)', representing an array of the strings in the text record.
+ *
+ * %G_RESOLVER_RECORD_SOA records are returned as variants with the signature
+ * '(ssuuuuu)', representing a string containing the primary name server, a
+ * string containing the administrator, the serial as a guint32, the refresh
+ * interval as guint32, the retry interval as a guint32, the expire timeout
+ * as a guint32, and the ttl as a guint32.
+ *
+ * %G_RESOLVER_RECORD_NS records are returned as variants with the signature
+ * '(s)', representing a string of the hostname of the name server.
+ *
+ * Since: 2.34
+ */
+typedef enum {
+ G_RESOLVER_RECORD_SRV = 1,
+ G_RESOLVER_RECORD_MX,
+ G_RESOLVER_RECORD_TXT,
+ G_RESOLVER_RECORD_SOA,
+ G_RESOLVER_RECORD_NS
+} GResolverRecordType;
+
+/**
* GResourceError:
* @G_RESOURCE_ERROR_NOT_FOUND: no file was found at the requested path
* @G_RESOURCE_ERROR_INTERNAL: unknown error
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
- * them; the man pages suggest using the entire <literal>struct
- * sockaddr_un</literal> as the name, padding the unused parts of the
- * %sun_path field with zeroes; this corresponds to
- * %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
- * instead just use a portion of %sun_path, and pass an appropriate
- * smaller length to bind() or connect(). This is
+ * them; the man pages suggest using the entire `struct sockaddr_un`
+ * as the name, padding the unused parts of the %sun_path field with
+ * zeroes; this corresponds to %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED.
+ * However, many programs instead just use a portion of %sun_path, and
+ * pass an appropriate smaller length to bind() or connect(). This is
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
*
* Since: 2.26
* @G_BUS_TYPE_NONE: Not a message bus.
* @G_BUS_TYPE_SYSTEM: The system-wide message bus.
* @G_BUS_TYPE_SESSION: The login session message bus.
+ * @G_BUS_TYPE_MACHINE: New bus type for kdbus transport (falls back to system bus in case of failure).
+ * @G_BUS_TYPE_USER: New bus type for kdbus transport (falls back to session bus in case of failure).
*
* An enumeration for well-known message buses.
*
G_BUS_TYPE_STARTER = -1,
G_BUS_TYPE_NONE = 0,
G_BUS_TYPE_SYSTEM = 1,
- G_BUS_TYPE_SESSION = 2
+ G_BUS_TYPE_SESSION = 2,
+ G_BUS_TYPE_MACHINE = 3,
+ G_BUS_TYPE_USER = 4
} GBusType;
/**
* GBusNameOwnerFlags:
* @G_BUS_NAME_OWNER_FLAGS_NONE: No flags set.
- * @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the the name.
+ * @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the name.
* @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have
* specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
+ * @G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE: Do not place message bus connection in a queue to own the name.
*
* Flags used in g_bus_own_name().
*
{
G_BUS_NAME_OWNER_FLAGS_NONE = 0, /*< nick=none >*/
G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT = (1<<0), /*< nick=allow-replacement >*/
- G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1) /*< nick=replace >*/
+ G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1), /*< nick=replace >*/
+ G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE = (1<<2) /*< nick=do-not-queue >*/
} GBusNameOwnerFlags;
/**
+ * GBusRequestNameReplyFlags:
+ * @G_BUS_REQUEST_NAME_FLAGS_ERROR: Error flag.
+ * @G_BUS_REQUEST_NAME_FLAGS_PRIMARY_OWNER: Caller is now the primary owner of the name, replacing any previous owner.
+ * @G_BUS_REQUEST_NAME_FLAGS_IN_QUEUE: The name already had an owner, the application will be placed in a queue.
+ * @G_BUS_REQUEST_NAME_FLAGS_EXISTS: The name already has an owner.
+ * @G_BUS_REQUEST_NAME_FLAGS_ALREADY_OWNER: The application trying to request ownership of a name is already the owner of it.
+ *
+ * Flags used in g_dbus_request_name().
+ *
+ * Since: 2.4x
+ */
+typedef enum
+{
+ G_BUS_REQUEST_NAME_FLAGS_ERROR = 0,
+ G_BUS_REQUEST_NAME_FLAGS_PRIMARY_OWNER = 1,
+ G_BUS_REQUEST_NAME_FLAGS_IN_QUEUE = 2,
+ G_BUS_REQUEST_NAME_FLAGS_EXISTS = 3,
+ G_BUS_REQUEST_NAME_FLAGS_ALREADY_OWNER = 4
+} GBusRequestNameReplyFlags;
+
+/**
+ * GBusReleaseNameReplyFlags:
+ * @G_BUS_RELEASE_NAME_FLAGS_ERROR: Error flag.
+ * @G_BUS_RELEASE_NAME_FLAGS_RELEASED: The caller has released his claim on the given name.
+ * @G_BUS_RELEASE_NAME_FLAGS_NON_EXISTENT: The given name does not exist on this bus
+ * @G_BUS_RELEASE_NAME_FLAGS_NOT_OWNER: The caller not waiting in the queue to own this name
+ *
+ * Flags used in g_dbus_release_name().
+ *
+ * Since: 2.4x
+ */
+typedef enum
+{
+ G_BUS_RELEASE_NAME_FLAGS_ERROR = 0,
+ G_BUS_RELEASE_NAME_FLAGS_RELEASED = 1,
+ G_BUS_RELEASE_NAME_FLAGS_NON_EXISTENT = 2,
+ G_BUS_RELEASE_NAME_FLAGS_NOT_OWNER = 3
+} GBusReleaseNameReplyFlags;
+
+/**
* GBusNameWatcherFlags:
* @G_BUS_NAME_WATCHER_FLAGS_NONE: No flags set.
* @G_BUS_NAME_WATCHER_FLAGS_AUTO_START: If no-one owns the name when
* then request the bus to launch an owner for the name if no-one owns the name. This flag can
* only be used in proxies for well-known names.
* @G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES: If set, the property value for any <emphasis>invalidated property</emphasis> will be (asynchronously) retrieved upon receiving the <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties">PropertiesChanged</ulink> D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
+ * @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION: If the proxy is for a well-known name,
+ * do not ask the bus to launch an owner during proxy initialization, but allow it to be
+ * autostarted by a method call. This flag is only meaningful in proxies for well-known names,
+ * and only if %G_DBUS_PROXY_FLAGS_DO_NOT_AUTOSTART is not also specified.
*
* Flags used when constructing an instance of a #GDBusProxy derived class.
*
G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2),
- G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3)
+ G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3),
+ G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION = (1<<4)
} GDBusProxyFlags;
/**
* Existing file and the operation you're using does not silently overwrite.
* @G_DBUS_ERROR_UNKNOWN_METHOD:
* Method name you invoked isn't known by the object you invoked it on.
+ * @G_DBUS_ERROR_UNKNOWN_OBJECT:
+ * Object you invoked a method on isn't known. Since 2.42
+ * @G_DBUS_ERROR_UNKNOWN_INTERFACE:
+ * Interface you invoked a method on isn't known by the object. Since 2.42
+ * @G_DBUS_ERROR_UNKNOWN_PROPERTY:
+ * Property you tried to access isn't known by the object. Since 2.42
+ * @G_DBUS_ERROR_PROPERTY_READ_ONLY:
+ * Property you tried to set is read-only. Since 2.42
* @G_DBUS_ERROR_TIMED_OUT:
* Certain timeout errors, e.g. while starting a service. Warning: this is
* confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */
G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */
G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */
- G_DBUS_ERROR_OBJECT_PATH_IN_USE /* org.freedesktop.DBus.Error.ObjectPathInUse */
+ G_DBUS_ERROR_OBJECT_PATH_IN_USE, /* org.freedesktop.DBus.Error.ObjectPathInUse */
+ G_DBUS_ERROR_UNKNOWN_OBJECT, /* org.freedesktop.DBus.Error.UnknownObject */
+ G_DBUS_ERROR_UNKNOWN_INTERFACE, /* org.freedesktop.DBus.Error.UnknownInterface */
+ G_DBUS_ERROR_UNKNOWN_PROPERTY, /* org.freedesktop.DBus.Error.UnknownProperty */
+ G_DBUS_ERROR_PROPERTY_READ_ONLY /* org.freedesktop.DBus.Error.PropertyReadOnly */
} GDBusError;
/* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */
* @G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch
* D-Bus call for this signal subscription. This gives you more control
* over which match rules you add (but you must add them manually).
+ * @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE: Match first arguments that
+ * contain a bus or interface name with the given namespace.
+ * @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH: Match first arguments that
+ * contain an object path that is either equivalent to the given path,
+ * or one of the paths is a subpath of the other.
*
* Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
*
typedef enum /*< flags >*/
{
G_DBUS_SIGNAL_FLAGS_NONE = 0,
- G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0)
+ G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0),
+ G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE = (1<<1),
+ G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH = (1<<2)
} GDBusSignalFlags;
/**
* assign a serial number from the #GDBusConnection object when
* sending a message.
*
- * Flags used when sending #GDBusMessage<!-- -->s on a #GDBusConnection.
+ * Flags used when sending #GDBusMessages on a #GDBusConnection.
*
* Since: 2.26
*/
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
* @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a <type>struct cmsgcred</type>.
* @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a <type>struct sockpeercred</type>. Added in 2.30.
+ * @G_CREDENTIALS_TYPE_SOLARIS_UCRED: The native credentials type is a <type>ucred_t</type>. Added in 2.40.
+ * @G_CREDENTIALS_TYPE_NETBSD_UNPCBID: The native credentials type is a <type>struct unpcbid</type>.
*
* Enumeration describing different kinds of native credential types.
*
G_CREDENTIALS_TYPE_INVALID,
G_CREDENTIALS_TYPE_LINUX_UCRED,
G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED,
- G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED
+ G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED,
+ G_CREDENTIALS_TYPE_SOLARIS_UCRED,
+ G_CREDENTIALS_TYPE_NETBSD_UNPCBID
} GCredentialsType;
/**
* GApplicationFlags:
* @G_APPLICATION_FLAGS_NONE: Default
* @G_APPLICATION_IS_SERVICE: Run as a service. In this mode, registration
- * fails if the service is already running, and the application will
- * stay around for a while when the use count falls to zero.
+ * fails if the service is already running, and the application
+ * will initially wait up to 10 seconds for an initial activation
+ * message to arrive.
* @G_APPLICATION_IS_LAUNCHER: Don't try to become the primary instance.
* @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in
* the primary instance). Note that this flag only affects the default
* to the #GApplication::command-line signal handler, via
* g_application_command_line_getenv().
* @G_APPLICATION_NON_UNIQUE: Make no attempts to do any of the typical
- * single-instance application negotiation. The application neither
- * attempts to become the owner of the application ID nor does it
- * check if an existing owner already exists. Everything occurs in
- * the local process. Since: 2.30.
+ * single-instance application negotiation, even if the application
+ * ID is given. The application neither attempts to become the
+ * owner of the application ID nor does it check if an existing
+ * owner already exists. Everything occurs in the local process.
+ * Since: 2.30.
*
* Flags used to define the behaviour of a #GApplication.
*
} GTlsDatabaseLookupFlags;
/**
+ * GTlsCertificateRequestFlags:
+ * @G_TLS_CERTIFICATE_REQUEST_NONE: No flags
+ *
+ * Flags for g_tls_interaction_request_certificate(),
+ * g_tls_interaction_request_certificate_async(), and
+ * g_tls_interaction_invoke_request_certificate().
+ *
+ * Since: 2.40
+ */
+typedef enum {
+ G_TLS_CERTIFICATE_REQUEST_NONE = 0
+} GTlsCertificateRequestFlags;
+
+/**
* GIOModuleScopeFlags:
* @G_IO_MODULE_SCOPE_NONE: No module scan flags
* @G_IO_MODULE_SCOPE_BLOCK_DUPLICATES: When using this scope to load or
G_SOCKET_CLIENT_COMPLETE
} GSocketClientEvent;
+/**
+ * GTestDBusFlags:
+ * @G_TEST_DBUS_NONE: No flags.
+ *
+ * Flags to define future #GTestDBus behaviour.
+ *
+ * Since: 2.34
+ */
+typedef enum /*< flags >*/ {
+ G_TEST_DBUS_NONE = 0
+} GTestDBusFlags;
+
+/**
+ * GSubprocessFlags:
+ * @G_SUBPROCESS_FLAGS_NONE: No flags.
+ * @G_SUBPROCESS_FLAGS_STDIN_PIPE: create a pipe for the stdin of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stdin_pipe().
+ * @G_SUBPROCESS_FLAGS_STDIN_INHERIT: stdin is inherited from the
+ * calling process.
+ * @G_SUBPROCESS_FLAGS_STDOUT_PIPE: create a pipe for the stdout of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stdout_pipe().
+ * @G_SUBPROCESS_FLAGS_STDOUT_SILENCE: silence the stdout of the spawned
+ * process (ie: redirect to /dev/null).
+ * @G_SUBPROCESS_FLAGS_STDERR_PIPE: create a pipe for the stderr of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stderr_pipe().
+ * @G_SUBPROCESS_FLAGS_STDERR_SILENCE: silence the stderr of the spawned
+ * process (ie: redirect to /dev/null).
+ * @G_SUBPROCESS_FLAGS_STDERR_MERGE: merge the stderr of the spawned
+ * process with whatever the stdout happens to be. This is a good way
+ * of directing both streams to a common log file, for example.
+ * @G_SUBPROCESS_FLAGS_INHERIT_FDS: spawned processes will inherit the
+ * file descriptors of their parent, unless those descriptors have
+ * been explicitly marked as close-on-exec. This flag has no effect
+ * over the "standard" file descriptors (stdin, stdout, stderr).
+ *
+ * Flags to define the behaviour of a #GSubprocess.
+ *
+ * Note that the default for stdin is to redirect from /dev/null. For
+ * stdout and stderr the default are for them to inherit the
+ * corresponding descriptor from the calling process.
+ *
+ * Note that it is a programmer error to mix 'incompatible' flags. For
+ * example, you may not request both %G_SUBPROCESS_FLAGS_STDOUT_PIPE and
+ * %G_SUBPROCESS_FLAGS_STDOUT_SILENCE.
+ *
+ * Since: 2.40
+ **/
+typedef enum {
+ G_SUBPROCESS_FLAGS_NONE = 0,
+ G_SUBPROCESS_FLAGS_STDIN_PIPE = (1u << 0),
+ G_SUBPROCESS_FLAGS_STDIN_INHERIT = (1u << 1),
+ G_SUBPROCESS_FLAGS_STDOUT_PIPE = (1u << 2),
+ G_SUBPROCESS_FLAGS_STDOUT_SILENCE = (1u << 3),
+ G_SUBPROCESS_FLAGS_STDERR_PIPE = (1u << 4),
+ G_SUBPROCESS_FLAGS_STDERR_SILENCE = (1u << 5),
+ G_SUBPROCESS_FLAGS_STDERR_MERGE = (1u << 6),
+ G_SUBPROCESS_FLAGS_INHERIT_FDS = (1u << 7)
+} GSubprocessFlags;
+
+/**
+ * GNotificationPriority:
+ * @G_NOTIFICATION_PRIORITY_LOW: for notifications that do not require
+ * immediate attention - typically used for contextual background
+ * information, such as contact birthdays or local weather
+ * @G_NOTIFICATION_PRIORITY_NORMAL: the default priority, to be used for the
+ * majority of notifications (for example email messages, software updates,
+ * completed download/sync operations)
+ * @G_NOTIFICATION_PRIORITY_HIGH: for events that require more attention,
+ * usually because responses are time-sensitive (for example chat and SMS
+ * messages or alarms)
+ * @G_NOTIFICATION_PRIORITY_URGENT: for urgent notifications, or notifications
+ * that require a response in a short space of time (for example phone calls
+ * or emergency warnings)
+ *
+ * Priority levels for #GNotifications.
+ *
+ * Since: 2.42
+ */
+typedef enum {
+ G_NOTIFICATION_PRIORITY_NORMAL,
+ G_NOTIFICATION_PRIORITY_LOW,
+ G_NOTIFICATION_PRIORITY_HIGH,
+ G_NOTIFICATION_PRIORITY_URGENT
+} GNotificationPriority;
+
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */