* @G_FILE_MEASURE_APPARENT_SIZE: Tally usage based on apparent file
* sizes. Normally, the block-size is used, if available, as this is a
* more accurate representation of disk space used.
- * Compare with '<literal>du --apparent-size</literal>'.
+ * Compare with `du --apparent-size`.
* @G_FILE_MEASURE_NO_XDEV: Do not cross mount point boundaries.
- * Compare with '<literal>du -x</literal>'.
+ * Compare with `du -x`.
*
* Flags that can be used with g_file_measure_disk_usage().
*
*/
/**
* GIOErrorEnum:
- * @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
+ * @G_IO_ERROR_FAILED: Generic error condition for when an operation fails
+ * and no more specific #GIOErrorEnum value is defined.
* @G_IO_ERROR_NOT_FOUND: File not found.
* @G_IO_ERROR_EXISTS: File already exists.
* @G_IO_ERROR_IS_DIRECTORY: File is a directory.
* @G_IO_ERROR_NO_SPACE: No space left on drive.
* @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument.
* @G_IO_ERROR_PERMISSION_DENIED: Permission denied.
- * @G_IO_ERROR_NOT_SUPPORTED: Operation not supported for the current backend.
+ * @G_IO_ERROR_NOT_SUPPORTED: Operation (or one of its parameters) not supported
* @G_IO_ERROR_NOT_MOUNTED: File isn't mounted.
* @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted.
* @G_IO_ERROR_CLOSED: File was closed.
* @G_IO_ERROR_PROXY_NOT_ALLOWED: Proxy connection is not allowed by ruleset.
* Since 2.26
* @G_IO_ERROR_BROKEN_PIPE: Broken pipe. Since 2.36
+ * @G_IO_ERROR_CONNECTION_CLOSED: Connection closed by peer. Note that this
+ * is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some
+ * "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others
+ * returned %G_IO_ERROR_FAILED. Now they should all return the same
+ * value, which has this more logical name. Since 2.44.
+ * @G_IO_ERROR_NOT_CONNECTED: Transport endpoint is not connected. Since 2.44
*
* Error codes returned by GIO functions.
*
+ * Note that this domain may be extended in future GLib releases. In
+ * general, new error codes either only apply to new APIs, or else
+ * replace %G_IO_ERROR_FAILED in cases that were not explicitly
+ * distinguished before. You should therefore avoid writing code like
+ * |[<!-- language="C" -->
+ * if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED))
+ * {
+ * // Assume that this is EPRINTERONFIRE
+ * ...
+ * }
+ * ]|
+ * but should instead treat all unrecognized error codes the same as
+ * #G_IO_ERROR_FAILED.
**/
typedef enum {
G_IO_ERROR_FAILED,
G_IO_ERROR_PROXY_AUTH_FAILED,
G_IO_ERROR_PROXY_NEED_AUTH,
G_IO_ERROR_PROXY_NOT_ALLOWED,
- G_IO_ERROR_BROKEN_PIPE
+ G_IO_ERROR_BROKEN_PIPE,
+ G_IO_ERROR_CONNECTION_CLOSED = G_IO_ERROR_BROKEN_PIPE,
+ G_IO_ERROR_NOT_CONNECTED
} GIOErrorEnum;
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
- * them; the man pages suggest using the entire <literal>struct
- * sockaddr_un</literal> as the name, padding the unused parts of the
- * %sun_path field with zeroes; this corresponds to
- * %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
- * instead just use a portion of %sun_path, and pass an appropriate
- * smaller length to bind() or connect(). This is
+ * them; the man pages suggest using the entire `struct sockaddr_un`
+ * as the name, padding the unused parts of the %sun_path field with
+ * zeroes; this corresponds to %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED.
+ * However, many programs instead just use a portion of %sun_path, and
+ * pass an appropriate smaller length to bind() or connect(). This is
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
*
* Since: 2.26
* @G_BUS_TYPE_NONE: Not a message bus.
* @G_BUS_TYPE_SYSTEM: The system-wide message bus.
* @G_BUS_TYPE_SESSION: The login session message bus.
+ * @G_BUS_TYPE_MACHINE: New bus type for kdbus transport (falls back to system bus in case of failure).
+ * @G_BUS_TYPE_USER: New bus type for kdbus transport (falls back to session bus in case of failure).
*
* An enumeration for well-known message buses.
*
G_BUS_TYPE_STARTER = -1,
G_BUS_TYPE_NONE = 0,
G_BUS_TYPE_SYSTEM = 1,
- G_BUS_TYPE_SESSION = 2
+ G_BUS_TYPE_SESSION = 2,
+ G_BUS_TYPE_MACHINE = 3,
+ G_BUS_TYPE_USER = 4
} GBusType;
/**
* @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the name.
* @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have
* specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
+ * @G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE: Do not place message bus connection in a queue to own the name.
*
* Flags used in g_bus_own_name().
*
{
G_BUS_NAME_OWNER_FLAGS_NONE = 0, /*< nick=none >*/
G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT = (1<<0), /*< nick=allow-replacement >*/
- G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1) /*< nick=replace >*/
+ G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1), /*< nick=replace >*/
+ G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE = (1<<2) /*< nick=do-not-queue >*/
} GBusNameOwnerFlags;
/**
+ * GBusRequestNameReplyFlags:
+ * @G_BUS_REQUEST_NAME_FLAGS_ERROR: Error flag.
+ * @G_BUS_REQUEST_NAME_FLAGS_PRIMARY_OWNER: Caller is now the primary owner of the name, replacing any previous owner.
+ * @G_BUS_REQUEST_NAME_FLAGS_IN_QUEUE: The name already had an owner, the application will be placed in a queue.
+ * @G_BUS_REQUEST_NAME_FLAGS_EXISTS: The name already has an owner.
+ * @G_BUS_REQUEST_NAME_FLAGS_ALREADY_OWNER: The application trying to request ownership of a name is already the owner of it.
+ *
+ * Flags used in g_dbus_request_name().
+ *
+ * Since: 2.4x
+ */
+typedef enum
+{
+ G_BUS_REQUEST_NAME_FLAGS_ERROR = 0,
+ G_BUS_REQUEST_NAME_FLAGS_PRIMARY_OWNER = 1,
+ G_BUS_REQUEST_NAME_FLAGS_IN_QUEUE = 2,
+ G_BUS_REQUEST_NAME_FLAGS_EXISTS = 3,
+ G_BUS_REQUEST_NAME_FLAGS_ALREADY_OWNER = 4
+} GBusRequestNameReplyFlags;
+
+/**
+ * GBusReleaseNameReplyFlags:
+ * @G_BUS_RELEASE_NAME_FLAGS_ERROR: Error flag.
+ * @G_BUS_RELEASE_NAME_FLAGS_RELEASED: The caller has released his claim on the given name.
+ * @G_BUS_RELEASE_NAME_FLAGS_NON_EXISTENT: The given name does not exist on this bus
+ * @G_BUS_RELEASE_NAME_FLAGS_NOT_OWNER: The caller not waiting in the queue to own this name
+ *
+ * Flags used in g_dbus_release_name().
+ *
+ * Since: 2.4x
+ */
+typedef enum
+{
+ G_BUS_RELEASE_NAME_FLAGS_ERROR = 0,
+ G_BUS_RELEASE_NAME_FLAGS_RELEASED = 1,
+ G_BUS_RELEASE_NAME_FLAGS_NON_EXISTENT = 2,
+ G_BUS_RELEASE_NAME_FLAGS_NOT_OWNER = 3
+} GBusReleaseNameReplyFlags;
+
+/**
* GBusNameWatcherFlags:
* @G_BUS_NAME_WATCHER_FLAGS_NONE: No flags set.
* @G_BUS_NAME_WATCHER_FLAGS_AUTO_START: If no-one owns the name when
* Existing file and the operation you're using does not silently overwrite.
* @G_DBUS_ERROR_UNKNOWN_METHOD:
* Method name you invoked isn't known by the object you invoked it on.
+ * @G_DBUS_ERROR_UNKNOWN_OBJECT:
+ * Object you invoked a method on isn't known. Since 2.42
+ * @G_DBUS_ERROR_UNKNOWN_INTERFACE:
+ * Interface you invoked a method on isn't known by the object. Since 2.42
+ * @G_DBUS_ERROR_UNKNOWN_PROPERTY:
+ * Property you tried to access isn't known by the object. Since 2.42
+ * @G_DBUS_ERROR_PROPERTY_READ_ONLY:
+ * Property you tried to set is read-only. Since 2.42
* @G_DBUS_ERROR_TIMED_OUT:
* Certain timeout errors, e.g. while starting a service. Warning: this is
* confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */
G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */
G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */
- G_DBUS_ERROR_OBJECT_PATH_IN_USE /* org.freedesktop.DBus.Error.ObjectPathInUse */
+ G_DBUS_ERROR_OBJECT_PATH_IN_USE, /* org.freedesktop.DBus.Error.ObjectPathInUse */
+ G_DBUS_ERROR_UNKNOWN_OBJECT, /* org.freedesktop.DBus.Error.UnknownObject */
+ G_DBUS_ERROR_UNKNOWN_INTERFACE, /* org.freedesktop.DBus.Error.UnknownInterface */
+ G_DBUS_ERROR_UNKNOWN_PROPERTY, /* org.freedesktop.DBus.Error.UnknownProperty */
+ G_DBUS_ERROR_PROPERTY_READ_ONLY /* org.freedesktop.DBus.Error.PropertyReadOnly */
} GDBusError;
/* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */
* assign a serial number from the #GDBusConnection object when
* sending a message.
*
- * Flags used when sending #GDBusMessage<!-- -->s on a #GDBusConnection.
+ * Flags used when sending #GDBusMessages on a #GDBusConnection.
*
* Since: 2.26
*/
* @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a <type>struct cmsgcred</type>.
* @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a <type>struct sockpeercred</type>. Added in 2.30.
* @G_CREDENTIALS_TYPE_SOLARIS_UCRED: The native credentials type is a <type>ucred_t</type>. Added in 2.40.
+ * @G_CREDENTIALS_TYPE_NETBSD_UNPCBID: The native credentials type is a <type>struct unpcbid</type>.
*
* Enumeration describing different kinds of native credential types.
*
G_CREDENTIALS_TYPE_LINUX_UCRED,
G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED,
G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED,
- G_CREDENTIALS_TYPE_SOLARIS_UCRED
+ G_CREDENTIALS_TYPE_SOLARIS_UCRED,
+ G_CREDENTIALS_TYPE_NETBSD_UNPCBID
} GCredentialsType;
/**
G_SUBPROCESS_FLAGS_INHERIT_FDS = (1u << 7)
} GSubprocessFlags;
+/**
+ * GNotificationPriority:
+ * @G_NOTIFICATION_PRIORITY_LOW: for notifications that do not require
+ * immediate attention - typically used for contextual background
+ * information, such as contact birthdays or local weather
+ * @G_NOTIFICATION_PRIORITY_NORMAL: the default priority, to be used for the
+ * majority of notifications (for example email messages, software updates,
+ * completed download/sync operations)
+ * @G_NOTIFICATION_PRIORITY_HIGH: for events that require more attention,
+ * usually because responses are time-sensitive (for example chat and SMS
+ * messages or alarms)
+ * @G_NOTIFICATION_PRIORITY_URGENT: for urgent notifications, or notifications
+ * that require a response in a short space of time (for example phone calls
+ * or emergency warnings)
+ *
+ * Priority levels for #GNotifications.
+ *
+ * Since: 2.42
+ */
+typedef enum {
+ G_NOTIFICATION_PRIORITY_NORMAL,
+ G_NOTIFICATION_PRIORITY_LOW,
+ G_NOTIFICATION_PRIORITY_HIGH,
+ G_NOTIFICATION_PRIORITY_URGENT
+} GNotificationPriority;
+
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */