*
* Flags used when mounting a mount.
*/
-typedef enum {
+typedef enum /*< flags >*/ {
G_MOUNT_MOUNT_NONE = 0
} GMountMountFlags;
*
* Since: 2.22
*/
-typedef enum {
+typedef enum /*< flags >*/ {
G_DRIVE_START_NONE = 0
} GDriveStartFlags;
/**
* GIOErrorEnum:
* @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
- * @G_IO_ERROR_NOT_FOUND: File not found error.
- * @G_IO_ERROR_EXISTS: File already exists error.
- * @G_IO_ERROR_IS_DIRECTORY: File is a directory error.
+ * @G_IO_ERROR_NOT_FOUND: File not found.
+ * @G_IO_ERROR_EXISTS: File already exists.
+ * @G_IO_ERROR_IS_DIRECTORY: File is a directory.
* @G_IO_ERROR_NOT_DIRECTORY: File is not a directory.
* @G_IO_ERROR_NOT_EMPTY: File is a directory that isn't empty.
* @G_IO_ERROR_NOT_REGULAR_FILE: File is not a regular file.
* before calling the callback.
*
* GIOStreamSpliceFlags determine how streams should be spliced.
+ *
+ * Since: 2.28
**/
typedef enum {
G_IO_STREAM_SPLICE_NONE = 0,
G_IO_STREAM_SPLICE_CLOSE_STREAM1 = (1 << 0),
G_IO_STREAM_SPLICE_CLOSE_STREAM2 = (1 << 1),
- G_IO_STREAM_SPLICE_WAIT_FOR_BOTH = (1 << 2),
+ G_IO_STREAM_SPLICE_WAIT_FOR_BOTH = (1 << 2)
} GIOStreamSpliceFlags;
/**
} GResolverError;
/**
+ * GResourceError:
+ * @G_RESOURCE_ERROR_NOT_FOUND: no file was found at the requested path
+ * @G_RESOURCE_ERROR_INTERNAL: unknown error
+ *
+ * An error code used with %G_RESOURCE_ERROR in a #GError returned
+ * from a #GResource routine.
+ *
+ * Since: 2.32
+ */
+typedef enum {
+ G_RESOURCE_ERROR_NOT_FOUND,
+ G_RESOURCE_ERROR_INTERNAL
+} GResourceError;
+
+/**
+ * GResourceFlags:
+ * @G_RESOURCE_FLAGS_NONE: No flags set.
+ * @G_RESOURCE_FLAGS_COMPRESSED: The file is compressed.
+ *
+ * GResourceFlags give information about a particular file inside a resource
+ * bundle.
+ *
+ * Since: 2.32
+ **/
+typedef enum {
+ G_RESOURCE_FLAGS_NONE = 0,
+ G_RESOURCE_FLAGS_COMPRESSED = (1<<0)
+} GResourceFlags;
+
+/**
+ * GResourceLookupFlags:
+ * @G_RESOURCE_LOOKUP_FLAGS_NONE: No flags set.
+ *
+ * GResourceLookupFlags determine how resource path lookups are handled.
+ *
+ * Since: 2.32
+ **/
+typedef enum /*< flags >*/ {
+ G_RESOURCE_LOOKUP_FLAGS_NONE = 0
+} GResourceLookupFlags;
+
+/**
* GSocketFamily:
* @G_SOCKET_FAMILY_INVALID: no address family
* @G_SOCKET_FAMILY_IPV4: the IPv4 family
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
- * them: the man pages suggest using the entire <literal>struct
+ * them; the man pages suggest using the entire <literal>struct
* sockaddr_un</literal> as the name, padding the unused parts of the
* %sun_path field with zeroes; this corresponds to
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
* @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START: If not set and the proxy if for a well-known name,
* then request the bus to launch an owner for the name if no-one owns the name. This flag can
* only be used in proxies for well-known names.
+ * @G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES: If set, the property value for any <emphasis>invalidated property</emphasis> will be (asynchronously) retrieved upon receiving the <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties">PropertiesChanged</ulink> D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
*
* Flags used when constructing an instance of a #GDBusProxy derived class.
*
G_DBUS_PROXY_FLAGS_NONE = 0,
G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
- G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2)
+ G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2),
+ G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3)
} GDBusProxyFlags;
/**
G_DBUS_CALL_FLAGS_NONE = 0,
G_DBUS_CALL_FLAGS_NO_AUTO_START = (1<<0)
} GDBusCallFlags;
+/* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */
/**
* GDBusMessageType:
* GDBusSignalFlags:
* @G_DBUS_SIGNAL_FLAGS_NONE: No flags set.
* @G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch
- * DBus call for this signal subscription. This gives you more control
+ * D-Bus call for this signal subscription. This gives you more control
* over which match rules you add (but you must add them manually).
*
* Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
G_DBUS_SEND_MESSAGE_FLAGS_NONE = 0,
G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL = (1<<0)
} GDBusSendMessageFlags;
+/* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */
/**
* GCredentialsType:
* @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
* @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a <type>struct cmsgcred</type>.
+ * @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a <type>struct sockpeercred</type>. Added in 2.30.
*
* Enumeration describing different kinds of native credential types.
*
{
G_CREDENTIALS_TYPE_INVALID,
G_CREDENTIALS_TYPE_LINUX_UCRED,
- G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED
+ G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED,
+ G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED
} GCredentialsType;
/**
* fails if the service is already running, and the application will
* stay around for a while when the use count falls to zero.
* @G_APPLICATION_IS_LAUNCHER: Don't try to become the primary instance.
- * @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in the
- * primary instance)
+ * @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in
+ * the primary instance). Note that this flag only affects the default
+ * implementation of local_command_line(), and has no effect if
+ * %G_APPLICATION_HANDLES_COMMAND_LINE is given.
+ * See g_application_run() for details.
* @G_APPLICATION_HANDLES_COMMAND_LINE: This application handles command line
- * arguments (in the primary instance)
+ * arguments (in the primary instance). Note that this flag only affect
+ * the default implementation of local_command_line().
+ * See g_application_run() for details.
* @G_APPLICATION_SEND_ENVIRONMENT: Send the environment of the
- * launching process to the primary instance
+ * launching process to the primary instance. Set this flag if your
+ * application is expected to behave differently depending on certain
+ * environment variables. For instance, an editor might be expected
+ * to use the <envar>GIT_COMMITTER_NAME</envar> environment variable
+ * when editing a git commit message. The environment is available
+ * to the #GApplication::command-line signal handler, via
+ * g_application_command_line_getenv().
+ * @G_APPLICATION_NON_UNIQUE: Make no attempts to do any of the typical
+ * single-instance application negotiation. The application neither
+ * attempts to become the owner of the application ID nor does it
+ * check if an existing owner already exists. Everything occurs in
+ * the local process. Since: 2.30.
*
* Flags used to define the behaviour of a #GApplication.
*
- * Since: 2.26
+ * Since: 2.28
**/
typedef enum
{
G_APPLICATION_HANDLES_OPEN = (1 << 2),
G_APPLICATION_HANDLES_COMMAND_LINE = (1 << 3),
- G_APPLICATION_SEND_ENVIRONMENT = (1 << 4)
+ G_APPLICATION_SEND_ENVIRONMENT = (1 << 4),
+
+ G_APPLICATION_NON_UNIQUE = (1 << 5)
} GApplicationFlags;
/**
* is still in the future
* @G_TLS_CERTIFICATE_EXPIRED: The certificate has expired
* @G_TLS_CERTIFICATE_REVOKED: The certificate has been revoked
- * according to the #GTlsContext's certificate revocation list.
+ * according to the #GTlsConnection's certificate revocation list.
* @G_TLS_CERTIFICATE_INSECURE: The certificate's algorithm is
* considered insecure.
* @G_TLS_CERTIFICATE_GENERIC_ERROR: Some other error occurred validating
G_TLS_REHANDSHAKE_UNSAFELY
} GTlsRehandshakeMode;
+/**
+ * GTlsPasswordFlags:
+ * @G_TLS_PASSWORD_NONE: No flags
+ * @G_TLS_PASSWORD_RETRY: The password was wrong, and the user should retry.
+ * @G_TLS_PASSWORD_MANY_TRIES: Hint to the user that the password has been
+ * wrong many times, and the user may not have many chances left.
+ * @G_TLS_PASSWORD_FINAL_TRY: Hint to the user that this is the last try to get
+ * this password right.
+ *
+ * Various flags for the password.
+ *
+ * Since: 2.30
+ */
+
+typedef enum _GTlsPasswordFlags
+{
+ G_TLS_PASSWORD_NONE = 0,
+ G_TLS_PASSWORD_RETRY = 1 << 1,
+ G_TLS_PASSWORD_MANY_TRIES = 1 << 2,
+ G_TLS_PASSWORD_FINAL_TRY = 1 << 3
+} GTlsPasswordFlags;
+
+/**
+ * GTlsInteractionResult:
+ * @G_TLS_INTERACTION_UNHANDLED: The interaction was unhandled (i.e. not
+ * implemented).
+ * @G_TLS_INTERACTION_HANDLED: The interaction completed, and resulting data
+ * is available.
+ * @G_TLS_INTERACTION_FAILED: The interaction has failed, or was cancelled.
+ * and the operation should be aborted.
+ *
+ * #GTlsInteractionResult is returned by various functions in #GTlsInteraction
+ * when finishing an interaction request.
+ *
+ * Since: 2.30
+ */
+typedef enum {
+ G_TLS_INTERACTION_UNHANDLED,
+ G_TLS_INTERACTION_HANDLED,
+ G_TLS_INTERACTION_FAILED
+} GTlsInteractionResult;
+
+/**
+ * GDBusInterfaceSkeletonFlags:
+ * @G_DBUS_INTERFACE_SKELETON_FLAGS_NONE: No flags set.
+ * @G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD: Each method invocation is handled in
+ * a thread dedicated to the invocation. This means that the method implementation can use blocking IO
+ * without blocking any other part of the process. It also means that the method implementation must
+ * use locking to access data structures used by other threads.
+ *
+ * Flags describing the behavior of a #GDBusInterfaceSkeleton instance.
+ *
+ * Since: 2.30
+ */
+typedef enum
+{
+ G_DBUS_INTERFACE_SKELETON_FLAGS_NONE = 0,
+ G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD = (1<<0)
+} GDBusInterfaceSkeletonFlags;
+
+/**
+ * GDBusObjectManagerClientFlags:
+ * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE: No flags set.
+ * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START: If not set and the
+ * manager is for a well-known name, then request the bus to launch
+ * an owner for the name if no-one owns the name. This flag can only
+ * be used in managers for well-known names.
+ *
+ * Flags used when constructing a #GDBusObjectManagerClient.
+ *
+ * Since: 2.30
+ */
+typedef enum
+{
+ G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE = 0,
+ G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START = (1<<0)
+} GDBusObjectManagerClientFlags;
+
+/**
+ * GTlsDatabaseVerifyFlags:
+ * @G_TLS_DATABASE_VERIFY_NONE: No verification flags
+ *
+ * Flags for g_tls_database_verify_chain().
+ *
+ * Since: 2.30
+ */
+typedef enum /*< flags >*/ {
+ G_TLS_DATABASE_VERIFY_NONE = 0
+} GTlsDatabaseVerifyFlags;
+
+/**
+ * GTlsDatabaseLookupFlags:
+ * @G_TLS_DATABASE_LOOKUP_NONE: No lookup flags
+ * @G_TLS_DATABASE_LOOKUP_KEYPAIR: Restrict lookup to certificates that have
+ * a private key.
+ *
+ * Flags for g_tls_database_lookup_certificate_handle(),
+ * g_tls_database_lookup_certificate_issuer(),
+ * and g_tls_database_lookup_certificates_issued_by().
+ *
+ * Since: 2.30
+ */
+typedef enum {
+ G_TLS_DATABASE_LOOKUP_NONE = 0,
+ G_TLS_DATABASE_LOOKUP_KEYPAIR = 1
+} GTlsDatabaseLookupFlags;
+
+/**
+ * GIOModuleScopeFlags:
+ * @G_IO_MODULE_SCOPE_NONE: No module scan flags
+ * @G_IO_MODULE_SCOPE_BLOCK_DUPLICATES: When using this scope to load or
+ * scan modules, automatically block a modules which has the same base
+ * basename as previously loaded module.
+ *
+ * Flags for use with g_io_module_scope_new().
+ *
+ * Since: 2.30
+ */
+typedef enum {
+ G_IO_MODULE_SCOPE_NONE,
+ G_IO_MODULE_SCOPE_BLOCK_DUPLICATES
+} GIOModuleScopeFlags;
+
+/**
+ * GSocketClientEvent:
+ * @G_SOCKET_CLIENT_RESOLVING: The client is doing a DNS lookup.
+ * @G_SOCKET_CLIENT_RESOLVED: The client has completed a DNS lookup.
+ * @G_SOCKET_CLIENT_CONNECTING: The client is connecting to a remote
+ * host (either a proxy or the destination server).
+ * @G_SOCKET_CLIENT_CONNECTED: The client has connected to a remote
+ * host.
+ * @G_SOCKET_CLIENT_PROXY_NEGOTIATING: The client is negotiating
+ * with a proxy to connect to the destination server.
+ * @G_SOCKET_CLIENT_PROXY_NEGOTIATED: The client has negotiated
+ * with the proxy server.
+ * @G_SOCKET_CLIENT_TLS_HANDSHAKING: The client is performing a
+ * TLS handshake.
+ * @G_SOCKET_CLIENT_TLS_HANDSHAKED: The client has performed a
+ * TLS handshake.
+ * @G_SOCKET_CLIENT_COMPLETE: The client is done with a particular
+ * #GSocketConnectable.
+ *
+ * Describes an event occurring on a #GSocketClient. See the
+ * #GSocketClient::event signal for more details.
+ *
+ * Additional values may be added to this type in the future.
+ *
+ * Since: 2.32
+ */
+typedef enum {
+ G_SOCKET_CLIENT_RESOLVING,
+ G_SOCKET_CLIENT_RESOLVED,
+ G_SOCKET_CLIENT_CONNECTING,
+ G_SOCKET_CLIENT_CONNECTED,
+ G_SOCKET_CLIENT_PROXY_NEGOTIATING,
+ G_SOCKET_CLIENT_PROXY_NEGOTIATED,
+ G_SOCKET_CLIENT_TLS_HANDSHAKING,
+ G_SOCKET_CLIENT_TLS_HANDSHAKED,
+ G_SOCKET_CLIENT_COMPLETE
+} GSocketClientEvent;
+
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */