* domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
* error name and g_dbus_error_strip_remote_error() to fix up the
* message so it matches what was received on the wire. Since 2.26.
+ * @G_IO_ERROR_HOST_UNREACHABLE: Host unreachable. Since 2.26
+ * @G_IO_ERROR_NETWORK_UNREACHABLE: Network unreachable. Since 2.26
+ * @G_IO_ERROR_CONNECTION_REFUSED: Connection refused. Since 2.26
+ * @G_IO_ERROR_PROXY_FAILED: Connection to proxy server failed. Since 2.26
+ * @G_IO_ERROR_PROXY_AUTH_FAILED: Proxy authentication failed. Since 2.26
+ * @G_IO_ERROR_PROXY_NEED_AUTH: Proxy server needs authentication. Since 2.26
+ * @G_IO_ERROR_PROXY_NOT_ALLOWED: Proxy connection is not allowed by ruleset.
+ * Since 2.26
*
* Error codes returned by GIO functions.
*
G_IO_ERROR_ADDRESS_IN_USE,
G_IO_ERROR_PARTIAL_INPUT,
G_IO_ERROR_INVALID_DATA,
- G_IO_ERROR_DBUS_ERROR
+ G_IO_ERROR_DBUS_ERROR,
+ G_IO_ERROR_HOST_UNREACHABLE,
+ G_IO_ERROR_NETWORK_UNREACHABLE,
+ G_IO_ERROR_CONNECTION_REFUSED,
+ G_IO_ERROR_PROXY_FAILED,
+ G_IO_ERROR_PROXY_AUTH_FAILED,
+ G_IO_ERROR_PROXY_NEED_AUTH,
+ G_IO_ERROR_PROXY_NOT_ALLOWED
} GIOErrorEnum;
/**
+ * GIOStreamSpliceFlags:
+ * @G_IO_STREAM_SPLICE_NONE: Do not close either stream.
+ * @G_IO_STREAM_SPLICE_CLOSE_STREAM1: Close the first stream after
+ * the splice.
+ * @G_IO_STREAM_SPLICE_CLOSE_STREAM2: Close the second stream after
+ * the splice.
+ * @G_IO_STREAM_SPLICE_WAIT_FOR_BOTH: Wait for both splice operations to finish
+ * before calling the callback.
+ *
+ * GIOStreamSpliceFlags determine how streams should be spliced.
+ *
+ * Since: 2.28
+ **/
+typedef enum {
+ G_IO_STREAM_SPLICE_NONE = 0,
+ G_IO_STREAM_SPLICE_CLOSE_STREAM1 = (1 << 0),
+ G_IO_STREAM_SPLICE_CLOSE_STREAM2 = (1 << 1),
+ G_IO_STREAM_SPLICE_WAIT_FOR_BOTH = (1 << 2)
+} GIOStreamSpliceFlags;
+
+/**
* GEmblemOrigin:
* @G_EMBLEM_ORIGIN_UNKNOWN: Emblem of unknown origin
* @G_EMBLEM_ORIGIN_DEVICE: Emblem adds device-specific information
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
- * them: the man pages suggest using the entire <literal>struct
+ * them; the man pages suggest using the entire <literal>struct
* sockaddr_un</literal> as the name, padding the unused parts of the
* %sun_path field with zeroes; this corresponds to
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
/**
* GDBusSignalFlags:
* @G_DBUS_SIGNAL_FLAGS_NONE: No flags set.
+ * @G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch
+ * D-Bus call for this signal subscription. This gives you more control
+ * over which match rules you add (but you must add them manually).
*
* Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
*
typedef enum /*< flags >*/
{
G_DBUS_SIGNAL_FLAGS_NONE = 0,
+ G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0)
} GDBusSignalFlags;
/**
* GCredentialsType:
* @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
+ * @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a <type>struct cmsgcred</type>.
*
* Enumeration describing different kinds of native credential types.
*
typedef enum
{
G_CREDENTIALS_TYPE_INVALID,
- G_CREDENTIALS_TYPE_LINUX_UCRED
+ G_CREDENTIALS_TYPE_LINUX_UCRED,
+ G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED
} GCredentialsType;
+/**
+ * GDBusMessageByteOrder:
+ * @G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN: The byte order is big endian.
+ * @G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN: The byte order is little endian.
+ *
+ * Enumeration used to describe the byte order of a D-Bus message.
+ *
+ * Since: 2.26
+ */
+typedef enum
+{
+ G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN = 'B',
+ G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN = 'l'
+} GDBusMessageByteOrder;
+
+/**
+ * GApplicationFlags:
+ * @G_APPLICATION_FLAGS_NONE: Default
+ * @G_APPLICATION_IS_SERVICE: Run as a service. In this mode, registration
+ * fails if the service is already running, and the application will
+ * stay around for a while when the use count falls to zero.
+ * @G_APPLICATION_IS_LAUNCHER: Don't try to become the primary instance.
+ * @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in
+ * the primary instance). Note that this flag only affects the default
+ * implementation of local_command_line(), and has no effect if
+ * %G_APPLICATION_HANDLES_COMMAND_LINE is given.
+ * See g_application_run() for details.
+ * @G_APPLICATION_HANDLES_COMMAND_LINE: This application handles command line
+ * arguments (in the primary instance). Note that this flag only affect
+ * the default implementation of local_command_line().
+ * See g_application_run() for details.
+ * @G_APPLICATION_SEND_ENVIRONMENT: Send the environment of the
+ * launching process to the primary instance. Set this flag if your
+ * application is expected to behave differently depending on certain
+ * environment variables. For instance, an editor might be expected
+ * to use the <envar>GIT_COMMITTER_NAME</envar> environment variable
+ * when editing a git commit message. The environment is available
+ * to the #GApplication::command-line signal handler, via
+ * g_application_command_line_getenv().
+ * @G_APPLICATION_NON_UNIQUE: Make no attempts to do any of the typical
+ * single-instance application negotiation. The application neither
+ * attempts to become the owner of the application ID nor does it
+ * check if an existing owner already exists. Everything occurs in
+ * the local process. Since: 2.30.
+ *
+ * Flags used to define the behaviour of a #GApplication.
+ *
+ * Since: 2.28
+ **/
+typedef enum
+{
+ G_APPLICATION_FLAGS_NONE,
+ G_APPLICATION_IS_SERVICE = (1 << 0),
+ G_APPLICATION_IS_LAUNCHER = (1 << 1),
+
+ G_APPLICATION_HANDLES_OPEN = (1 << 2),
+ G_APPLICATION_HANDLES_COMMAND_LINE = (1 << 3),
+ G_APPLICATION_SEND_ENVIRONMENT = (1 << 4),
+
+ G_APPLICATION_NON_UNIQUE = (1 << 5),
+} GApplicationFlags;
+
+/**
+ * GTlsError:
+ * @G_TLS_ERROR_UNAVAILABLE: No TLS provider is available
+ * @G_TLS_ERROR_MISC: Miscellaneous TLS error
+ * @G_TLS_ERROR_BAD_CERTIFICATE: A certificate could not be parsed
+ * @G_TLS_ERROR_NOT_TLS: The TLS handshake failed because the
+ * peer does not seem to be a TLS server.
+ * @G_TLS_ERROR_HANDSHAKE: The TLS handshake failed because the
+ * peer's certificate was not acceptable.
+ * @G_TLS_ERROR_CERTIFICATE_REQUIRED: The TLS handshake failed because
+ * the server requested a client-side certificate, but none was
+ * provided. See g_tls_connection_set_certificate().
+ * @G_TLS_ERROR_EOF: The TLS connection was closed without proper
+ * notice, which may indicate an attack. See
+ * g_tls_connection_set_require_close_notify().
+ *
+ * An error code used with %G_TLS_ERROR in a #GError returned from a
+ * TLS-related routine.
+ *
+ * Since: 2.28
+ */
+typedef enum {
+ G_TLS_ERROR_UNAVAILABLE,
+ G_TLS_ERROR_MISC,
+ G_TLS_ERROR_BAD_CERTIFICATE,
+ G_TLS_ERROR_NOT_TLS,
+ G_TLS_ERROR_HANDSHAKE,
+ G_TLS_ERROR_CERTIFICATE_REQUIRED,
+ G_TLS_ERROR_EOF
+} GTlsError;
+
+/**
+ * GTlsCertificateFlags:
+ * @G_TLS_CERTIFICATE_UNKNOWN_CA: The signing certificate authority is
+ * not known.
+ * @G_TLS_CERTIFICATE_BAD_IDENTITY: The certificate does not match the
+ * expected identity of the site that it was retrieved from.
+ * @G_TLS_CERTIFICATE_NOT_ACTIVATED: The certificate's activation time
+ * is still in the future
+ * @G_TLS_CERTIFICATE_EXPIRED: The certificate has expired
+ * @G_TLS_CERTIFICATE_REVOKED: The certificate has been revoked
+ * according to the #GTlsContext's certificate revocation list.
+ * @G_TLS_CERTIFICATE_INSECURE: The certificate's algorithm is
+ * considered insecure.
+ * @G_TLS_CERTIFICATE_GENERIC_ERROR: Some other error occurred validating
+ * the certificate
+ * @G_TLS_CERTIFICATE_VALIDATE_ALL: the combination of all of the above
+ * flags
+ *
+ * A set of flags describing TLS certification validation. This can be
+ * used to set which validation steps to perform (eg, with
+ * g_tls_client_connection_set_validation_flags()), or to describe why
+ * a particular certificate was rejected (eg, in
+ * #GTlsConnection::accept-certificate).
+ *
+ * Since: 2.28
+ */
+typedef enum {
+ G_TLS_CERTIFICATE_UNKNOWN_CA = (1 << 0),
+ G_TLS_CERTIFICATE_BAD_IDENTITY = (1 << 1),
+ G_TLS_CERTIFICATE_NOT_ACTIVATED = (1 << 2),
+ G_TLS_CERTIFICATE_EXPIRED = (1 << 3),
+ G_TLS_CERTIFICATE_REVOKED = (1 << 4),
+ G_TLS_CERTIFICATE_INSECURE = (1 << 5),
+ G_TLS_CERTIFICATE_GENERIC_ERROR = (1 << 6),
+
+ G_TLS_CERTIFICATE_VALIDATE_ALL = 0x007f
+} GTlsCertificateFlags;
+
+/**
+ * GTlsAuthenticationMode:
+ * @G_TLS_AUTHENTICATION_NONE: client authentication not required
+ * @G_TLS_AUTHENTICATION_REQUESTED: client authentication is requested
+ * @G_TLS_AUTHENTICATION_REQUIRED: client authentication is required
+ *
+ * The client authentication mode for a #GTlsServerConnection.
+ *
+ * Since: 2.28
+ */
+typedef enum {
+ G_TLS_AUTHENTICATION_NONE,
+ G_TLS_AUTHENTICATION_REQUESTED,
+ G_TLS_AUTHENTICATION_REQUIRED
+} GTlsAuthenticationMode;
+
+/**
+ * GTlsRehandshakeMode:
+ * @G_TLS_REHANDSHAKE_NEVER: Never allow rehandshaking
+ * @G_TLS_REHANDSHAKE_SAFELY: Allow safe rehandshaking only
+ * @G_TLS_REHANDSHAKE_UNSAFELY: Allow unsafe rehandshaking
+ *
+ * When to allow rehandshaking. See
+ * g_tls_connection_set_rehandshake_mode().
+ *
+ * Since: 2.28
+ */
+typedef enum {
+ G_TLS_REHANDSHAKE_NEVER,
+ G_TLS_REHANDSHAKE_SAFELY,
+ G_TLS_REHANDSHAKE_UNSAFELY
+} GTlsRehandshakeMode;
+
+/**
+ * GDBusInterfaceSkeletonFlags:
+ * @G_DBUS_INTERFACE_SKELETON_FLAGS_NONE: No flags set.
+ * @G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD: Each method invocation is handled in
+ * a thread dedicated to the invocation. This means that the method implementation can use blocking IO
+ * without blocking any other part of the process. It also means that the method implementation must
+ * use locking to access data structures used by other threads.
+ *
+ * Flags describing the behavior of a #GDBusInterfaceSkeleton instance.
+ *
+ * Since: 2.30
+ */
+typedef enum
+{
+ G_DBUS_INTERFACE_SKELETON_FLAGS_NONE = 0,
+ G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD = (1<<0)
+} GDBusInterfaceSkeletonFlags;
+
+/**
+ * GDBusObjectManagerClientFlags:
+ * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE: No flags set.
+ * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START: If not set and the
+ * manager is for a well-known name, then request the bus to launch
+ * an owner for the name if no-one owns the name. This flag can only
+ * be used in managers for well-known names.
+ *
+ * Flags used when constructing a #GDBusObjectManagerClient.
+ *
+ * Since: 2.30
+ */
+typedef enum
+{
+ G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE = 0,
+ G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START = (1<<0),
+} GDBusObjectManagerClientFlags;
+
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */