* Author: Alexander Larsson <alexl@redhat.com>
*/
+#ifndef __GIO_ENUMS_H__
+#define __GIO_ENUMS_H__
+
#if !defined (__GIO_GIO_H_INSIDE__) && !defined (GIO_COMPILATION)
#error "Only <gio/gio.h> can be included directly."
#endif
-#ifndef __GIO_ENUMS_H__
-#define __GIO_ENUMS_H__
-
#include <glib-object.h>
G_BEGIN_DECLS
G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1)
} GFileCreateFlags;
+/**
+ * GFileMeasureFlags:
+ * @G_FILE_MEASURE_NONE: No flags set.
+ * @G_FILE_MEASURE_REPORT_ANY_ERROR: Report any error encountered
+ * while traversing the directory tree. Normally errors are only
+ * reported for the toplevel file.
+ * @G_FILE_MEASURE_APPARENT_SIZE: Tally usage based on apparent file
+ * sizes. Normally, the block-size is used, if available, as this is a
+ * more accurate representation of disk space used.
+ * Compare with '<literal>du --apparent-size</literal>'.
+ * @G_FILE_MEASURE_NO_XDEV: Do not cross mount point boundaries.
+ * Compare with '<literal>du -x</literal>'.
+ *
+ * Flags that can be used with g_file_measure_disk_usage().
+ *
+ * Since: 2.38
+ **/
+typedef enum {
+ G_FILE_MEASURE_NONE = 0,
+ G_FILE_MEASURE_REPORT_ANY_ERROR = (1 << 1),
+ G_FILE_MEASURE_APPARENT_SIZE = (1 << 2),
+ G_FILE_MEASURE_NO_XDEV = (1 << 3)
+} GFileMeasureFlags;
/**
* GMountMountFlags:
*
* Flags used when mounting a mount.
*/
-typedef enum {
+typedef enum /*< flags >*/ {
G_MOUNT_MOUNT_NONE = 0
} GMountMountFlags;
*
* Since: 2.22
*/
-typedef enum {
+typedef enum /*< flags >*/ {
G_DRIVE_START_NONE = 0
} GDriveStartFlags;
* event instead (NB: not supported on all backends; the default
* behaviour -without specifying this flag- is to send single DELETED
* and CREATED events).
+ * @G_FILE_MONITOR_WATCH_HARD_LINKS: Watch for changes to the file made
+ * via another hard link. Since 2.36.
*
* Flags used to set what a #GFileMonitor will watch for.
*/
typedef enum {
- G_FILE_MONITOR_NONE = 0,
- G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
- G_FILE_MONITOR_SEND_MOVED = (1 << 1)
+ G_FILE_MONITOR_NONE = 0,
+ G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
+ G_FILE_MONITOR_SEND_MOVED = (1 << 1),
+ G_FILE_MONITOR_WATCH_HARD_LINKS = (1 << 2)
} GFileMonitorFlags;
/**
* GIOErrorEnum:
* @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
- * @G_IO_ERROR_NOT_FOUND: File not found error.
- * @G_IO_ERROR_EXISTS: File already exists error.
- * @G_IO_ERROR_IS_DIRECTORY: File is a directory error.
+ * @G_IO_ERROR_NOT_FOUND: File not found.
+ * @G_IO_ERROR_EXISTS: File already exists.
+ * @G_IO_ERROR_IS_DIRECTORY: File is a directory.
* @G_IO_ERROR_NOT_DIRECTORY: File is not a directory.
* @G_IO_ERROR_NOT_EMPTY: File is a directory that isn't empty.
* @G_IO_ERROR_NOT_REGULAR_FILE: File is not a regular file.
* @G_IO_ERROR_NOT_INITIALIZED: The object has not been initialized. Since 2.22
* @G_IO_ERROR_ADDRESS_IN_USE: The requested address is already in use. Since 2.22
* @G_IO_ERROR_PARTIAL_INPUT: Need more input to finish operation. Since 2.24
- * @G_IO_ERROR_INVALID_DATA: There input data was invalid. Since 2.24
+ * @G_IO_ERROR_INVALID_DATA: The input data was invalid. Since 2.24
* @G_IO_ERROR_DBUS_ERROR: A remote object generated an error that
* doesn't correspond to a locally registered #GError error
* domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
* @G_IO_ERROR_PROXY_NEED_AUTH: Proxy server needs authentication. Since 2.26
* @G_IO_ERROR_PROXY_NOT_ALLOWED: Proxy connection is not allowed by ruleset.
* Since 2.26
+ * @G_IO_ERROR_BROKEN_PIPE: Broken pipe. Since 2.36
*
* Error codes returned by GIO functions.
*
G_IO_ERROR_PROXY_FAILED,
G_IO_ERROR_PROXY_AUTH_FAILED,
G_IO_ERROR_PROXY_NEED_AUTH,
- G_IO_ERROR_PROXY_NOT_ALLOWED
+ G_IO_ERROR_PROXY_NOT_ALLOWED,
+ G_IO_ERROR_BROKEN_PIPE
} GIOErrorEnum;
/**
+ * GIOStreamSpliceFlags:
+ * @G_IO_STREAM_SPLICE_NONE: Do not close either stream.
+ * @G_IO_STREAM_SPLICE_CLOSE_STREAM1: Close the first stream after
+ * the splice.
+ * @G_IO_STREAM_SPLICE_CLOSE_STREAM2: Close the second stream after
+ * the splice.
+ * @G_IO_STREAM_SPLICE_WAIT_FOR_BOTH: Wait for both splice operations to finish
+ * before calling the callback.
+ *
+ * GIOStreamSpliceFlags determine how streams should be spliced.
+ *
+ * Since: 2.28
+ **/
+typedef enum {
+ G_IO_STREAM_SPLICE_NONE = 0,
+ G_IO_STREAM_SPLICE_CLOSE_STREAM1 = (1 << 0),
+ G_IO_STREAM_SPLICE_CLOSE_STREAM2 = (1 << 1),
+ G_IO_STREAM_SPLICE_WAIT_FOR_BOTH = (1 << 2)
+} GIOStreamSpliceFlags;
+
+/**
* GEmblemOrigin:
* @G_EMBLEM_ORIGIN_UNKNOWN: Emblem of unknown origin
* @G_EMBLEM_ORIGIN_DEVICE: Emblem adds device-specific information
} GResolverError;
/**
+ * GResolverRecordType:
+ * @G_RESOLVER_RECORD_SRV: lookup DNS SRV records for a domain
+ * @G_RESOLVER_RECORD_MX: lookup DNS MX records for a domain
+ * @G_RESOLVER_RECORD_TXT: lookup DNS TXT records for a name
+ * @G_RESOLVER_RECORD_SOA: lookup DNS SOA records for a zone
+ * @G_RESOLVER_RECORD_NS: lookup DNS NS records for a domain
+ *
+ * The type of record that g_resolver_lookup_records() or
+ * g_resolver_lookup_records_async() should retrieve. The records are returned
+ * as lists of #GVariant tuples. Each record type has different values in
+ * the variant tuples returned.
+ *
+ * %G_RESOLVER_RECORD_SRV records are returned as variants with the signature
+ * '(qqqs)', containing a guint16 with the priority, a guint16 with the
+ * weight, a guint16 with the port, and a string of the hostname.
+ *
+ * %G_RESOLVER_RECORD_MX records are returned as variants with the signature
+ * '(qs)', representing a guint16 with the preference, and a string containing
+ * the mail exchanger hostname.
+ *
+ * %G_RESOLVER_RECORD_TXT records are returned as variants with the signature
+ * '(as)', representing an array of the strings in the text record.
+ *
+ * %G_RESOLVER_RECORD_SOA records are returned as variants with the signature
+ * '(ssuuuuu)', representing a string containing the primary name server, a
+ * string containing the administrator, the serial as a guint32, the refresh
+ * interval as guint32, the retry interval as a guint32, the expire timeout
+ * as a guint32, and the ttl as a guint32.
+ *
+ * %G_RESOLVER_RECORD_NS records are returned as variants with the signature
+ * '(s)', representing a string of the hostname of the name server.
+ *
+ * Since: 2.34
+ */
+typedef enum {
+ G_RESOLVER_RECORD_SRV = 1,
+ G_RESOLVER_RECORD_MX,
+ G_RESOLVER_RECORD_TXT,
+ G_RESOLVER_RECORD_SOA,
+ G_RESOLVER_RECORD_NS
+} GResolverRecordType;
+
+/**
+ * GResourceError:
+ * @G_RESOURCE_ERROR_NOT_FOUND: no file was found at the requested path
+ * @G_RESOURCE_ERROR_INTERNAL: unknown error
+ *
+ * An error code used with %G_RESOURCE_ERROR in a #GError returned
+ * from a #GResource routine.
+ *
+ * Since: 2.32
+ */
+typedef enum {
+ G_RESOURCE_ERROR_NOT_FOUND,
+ G_RESOURCE_ERROR_INTERNAL
+} GResourceError;
+
+/**
+ * GResourceFlags:
+ * @G_RESOURCE_FLAGS_NONE: No flags set.
+ * @G_RESOURCE_FLAGS_COMPRESSED: The file is compressed.
+ *
+ * GResourceFlags give information about a particular file inside a resource
+ * bundle.
+ *
+ * Since: 2.32
+ **/
+typedef enum {
+ G_RESOURCE_FLAGS_NONE = 0,
+ G_RESOURCE_FLAGS_COMPRESSED = (1<<0)
+} GResourceFlags;
+
+/**
+ * GResourceLookupFlags:
+ * @G_RESOURCE_LOOKUP_FLAGS_NONE: No flags set.
+ *
+ * GResourceLookupFlags determine how resource path lookups are handled.
+ *
+ * Since: 2.32
+ **/
+typedef enum /*< flags >*/ {
+ G_RESOURCE_LOOKUP_FLAGS_NONE = 0
+} GResourceLookupFlags;
+
+/**
* GSocketFamily:
* @G_SOCKET_FAMILY_INVALID: no address family
* @G_SOCKET_FAMILY_IPV4: the IPv4 family
*/
typedef enum {
G_SOCKET_FAMILY_INVALID,
-#ifdef GLIB_SYSDEF_AF_UNIX
G_SOCKET_FAMILY_UNIX = GLIB_SYSDEF_AF_UNIX,
-#endif
G_SOCKET_FAMILY_IPV4 = GLIB_SYSDEF_AF_INET,
G_SOCKET_FAMILY_IPV6 = GLIB_SYSDEF_AF_INET6
} GSocketFamily;
*
* Since: 2.22
*/
-typedef enum
+typedef enum /*< flags >*/
{
G_SOCKET_MSG_NONE,
G_SOCKET_MSG_OOB = GLIB_SYSDEF_MSG_OOB,
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
- * them: the man pages suggest using the entire <literal>struct
+ * them; the man pages suggest using the entire <literal>struct
* sockaddr_un</literal> as the name, padding the unused parts of the
* %sun_path field with zeroes; this corresponds to
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
/**
* GBusNameOwnerFlags:
* @G_BUS_NAME_OWNER_FLAGS_NONE: No flags set.
- * @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the the name.
+ * @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the name.
* @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have
* specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
*
* @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START: If not set and the proxy if for a well-known name,
* then request the bus to launch an owner for the name if no-one owns the name. This flag can
* only be used in proxies for well-known names.
+ * @G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES: If set, the property value for any <emphasis>invalidated property</emphasis> will be (asynchronously) retrieved upon receiving the <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties">PropertiesChanged</ulink> D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
+ * @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION: If the proxy is for a well-known name,
+ * do not ask the bus to launch an owner during proxy initialization, but allow it to be
+ * autostarted by a method call. This flag is only meaningful in proxies for well-known names,
+ * and only if %G_DBUS_PROXY_FLAGS_DO_NOT_AUTOSTART is not also specified.
*
* Flags used when constructing an instance of a #GDBusProxy derived class.
*
G_DBUS_PROXY_FLAGS_NONE = 0,
G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
- G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2)
+ G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2),
+ G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3),
+ G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION = (1<<4)
} GDBusProxyFlags;
/**
G_DBUS_CALL_FLAGS_NONE = 0,
G_DBUS_CALL_FLAGS_NO_AUTO_START = (1<<0)
} GDBusCallFlags;
+/* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */
/**
* GDBusMessageType:
* GDBusSignalFlags:
* @G_DBUS_SIGNAL_FLAGS_NONE: No flags set.
* @G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch
- * DBus call for this signal subscription. This gives you more control
+ * D-Bus call for this signal subscription. This gives you more control
* over which match rules you add (but you must add them manually).
+ * @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE: Match first arguments that
+ * contain a bus or interface name with the given namespace.
+ * @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH: Match first arguments that
+ * contain an object path that is either equivalent to the given path,
+ * or one of the paths is a subpath of the other.
*
* Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
*
typedef enum /*< flags >*/
{
G_DBUS_SIGNAL_FLAGS_NONE = 0,
- G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0)
+ G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0),
+ G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE = (1<<1),
+ G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH = (1<<2)
} GDBusSignalFlags;
/**
G_DBUS_SEND_MESSAGE_FLAGS_NONE = 0,
G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL = (1<<0)
} GDBusSendMessageFlags;
+/* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */
/**
* GCredentialsType:
* @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
* @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a <type>struct cmsgcred</type>.
+ * @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a <type>struct sockpeercred</type>. Added in 2.30.
+ * @G_CREDENTIALS_TYPE_SOLARIS_UCRED: The native credentials type is a <type>ucred_t</type>. Added in 2.40.
*
* Enumeration describing different kinds of native credential types.
*
{
G_CREDENTIALS_TYPE_INVALID,
G_CREDENTIALS_TYPE_LINUX_UCRED,
- G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED
+ G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED,
+ G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED,
+ G_CREDENTIALS_TYPE_SOLARIS_UCRED
} GCredentialsType;
/**
* GApplicationFlags:
* @G_APPLICATION_FLAGS_NONE: Default
* @G_APPLICATION_IS_SERVICE: Run as a service. In this mode, registration
- * fails if the service is already running, and the application will
- * stay around for a while when the use count falls to zero.
+ * fails if the service is already running, and the application
+ * will initially wait up to 10 seconds for an initial activation
+ * message to arrive.
* @G_APPLICATION_IS_LAUNCHER: Don't try to become the primary instance.
- * @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in the
- * primary instance)
+ * @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in
+ * the primary instance). Note that this flag only affects the default
+ * implementation of local_command_line(), and has no effect if
+ * %G_APPLICATION_HANDLES_COMMAND_LINE is given.
+ * See g_application_run() for details.
* @G_APPLICATION_HANDLES_COMMAND_LINE: This application handles command line
- * arguments (in the primary instance)
+ * arguments (in the primary instance). Note that this flag only affect
+ * the default implementation of local_command_line().
+ * See g_application_run() for details.
* @G_APPLICATION_SEND_ENVIRONMENT: Send the environment of the
- * launching process to the primary instance
+ * launching process to the primary instance. Set this flag if your
+ * application is expected to behave differently depending on certain
+ * environment variables. For instance, an editor might be expected
+ * to use the <envar>GIT_COMMITTER_NAME</envar> environment variable
+ * when editing a git commit message. The environment is available
+ * to the #GApplication::command-line signal handler, via
+ * g_application_command_line_getenv().
+ * @G_APPLICATION_NON_UNIQUE: Make no attempts to do any of the typical
+ * single-instance application negotiation, even if the application
+ * ID is given. The application neither attempts to become the
+ * owner of the application ID nor does it check if an existing
+ * owner already exists. Everything occurs in the local process.
+ * Since: 2.30.
*
* Flags used to define the behaviour of a #GApplication.
*
- * Since: 2.26
+ * Since: 2.28
**/
typedef enum
{
G_APPLICATION_HANDLES_OPEN = (1 << 2),
G_APPLICATION_HANDLES_COMMAND_LINE = (1 << 3),
- G_APPLICATION_SEND_ENVIRONMENT = (1 << 4)
+ G_APPLICATION_SEND_ENVIRONMENT = (1 << 4),
+
+ G_APPLICATION_NON_UNIQUE = (1 << 5)
} GApplicationFlags;
/**
* GTlsError:
+ * @G_TLS_ERROR_UNAVAILABLE: No TLS provider is available
* @G_TLS_ERROR_MISC: Miscellaneous TLS error
* @G_TLS_ERROR_BAD_CERTIFICATE: A certificate could not be parsed
* @G_TLS_ERROR_NOT_TLS: The TLS handshake failed because the
* Since: 2.28
*/
typedef enum {
+ G_TLS_ERROR_UNAVAILABLE,
G_TLS_ERROR_MISC,
G_TLS_ERROR_BAD_CERTIFICATE,
G_TLS_ERROR_NOT_TLS,
* is still in the future
* @G_TLS_CERTIFICATE_EXPIRED: The certificate has expired
* @G_TLS_CERTIFICATE_REVOKED: The certificate has been revoked
- * according to the #GTlsContext's certificate revocation list.
+ * according to the #GTlsConnection's certificate revocation list.
* @G_TLS_CERTIFICATE_INSECURE: The certificate's algorithm is
* considered insecure.
* @G_TLS_CERTIFICATE_GENERIC_ERROR: Some other error occurred validating
G_TLS_REHANDSHAKE_UNSAFELY
} GTlsRehandshakeMode;
+/**
+ * GTlsPasswordFlags:
+ * @G_TLS_PASSWORD_NONE: No flags
+ * @G_TLS_PASSWORD_RETRY: The password was wrong, and the user should retry.
+ * @G_TLS_PASSWORD_MANY_TRIES: Hint to the user that the password has been
+ * wrong many times, and the user may not have many chances left.
+ * @G_TLS_PASSWORD_FINAL_TRY: Hint to the user that this is the last try to get
+ * this password right.
+ *
+ * Various flags for the password.
+ *
+ * Since: 2.30
+ */
+
+typedef enum _GTlsPasswordFlags
+{
+ G_TLS_PASSWORD_NONE = 0,
+ G_TLS_PASSWORD_RETRY = 1 << 1,
+ G_TLS_PASSWORD_MANY_TRIES = 1 << 2,
+ G_TLS_PASSWORD_FINAL_TRY = 1 << 3
+} GTlsPasswordFlags;
+
+/**
+ * GTlsInteractionResult:
+ * @G_TLS_INTERACTION_UNHANDLED: The interaction was unhandled (i.e. not
+ * implemented).
+ * @G_TLS_INTERACTION_HANDLED: The interaction completed, and resulting data
+ * is available.
+ * @G_TLS_INTERACTION_FAILED: The interaction has failed, or was cancelled.
+ * and the operation should be aborted.
+ *
+ * #GTlsInteractionResult is returned by various functions in #GTlsInteraction
+ * when finishing an interaction request.
+ *
+ * Since: 2.30
+ */
+typedef enum {
+ G_TLS_INTERACTION_UNHANDLED,
+ G_TLS_INTERACTION_HANDLED,
+ G_TLS_INTERACTION_FAILED
+} GTlsInteractionResult;
+
+/**
+ * GDBusInterfaceSkeletonFlags:
+ * @G_DBUS_INTERFACE_SKELETON_FLAGS_NONE: No flags set.
+ * @G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD: Each method invocation is handled in
+ * a thread dedicated to the invocation. This means that the method implementation can use blocking IO
+ * without blocking any other part of the process. It also means that the method implementation must
+ * use locking to access data structures used by other threads.
+ *
+ * Flags describing the behavior of a #GDBusInterfaceSkeleton instance.
+ *
+ * Since: 2.30
+ */
+typedef enum
+{
+ G_DBUS_INTERFACE_SKELETON_FLAGS_NONE = 0,
+ G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD = (1<<0)
+} GDBusInterfaceSkeletonFlags;
+
+/**
+ * GDBusObjectManagerClientFlags:
+ * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE: No flags set.
+ * @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START: If not set and the
+ * manager is for a well-known name, then request the bus to launch
+ * an owner for the name if no-one owns the name. This flag can only
+ * be used in managers for well-known names.
+ *
+ * Flags used when constructing a #GDBusObjectManagerClient.
+ *
+ * Since: 2.30
+ */
+typedef enum
+{
+ G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE = 0,
+ G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START = (1<<0)
+} GDBusObjectManagerClientFlags;
+
+/**
+ * GTlsDatabaseVerifyFlags:
+ * @G_TLS_DATABASE_VERIFY_NONE: No verification flags
+ *
+ * Flags for g_tls_database_verify_chain().
+ *
+ * Since: 2.30
+ */
+typedef enum /*< flags >*/ {
+ G_TLS_DATABASE_VERIFY_NONE = 0
+} GTlsDatabaseVerifyFlags;
+
+/**
+ * GTlsDatabaseLookupFlags:
+ * @G_TLS_DATABASE_LOOKUP_NONE: No lookup flags
+ * @G_TLS_DATABASE_LOOKUP_KEYPAIR: Restrict lookup to certificates that have
+ * a private key.
+ *
+ * Flags for g_tls_database_lookup_certificate_handle(),
+ * g_tls_database_lookup_certificate_issuer(),
+ * and g_tls_database_lookup_certificates_issued_by().
+ *
+ * Since: 2.30
+ */
+typedef enum {
+ G_TLS_DATABASE_LOOKUP_NONE = 0,
+ G_TLS_DATABASE_LOOKUP_KEYPAIR = 1
+} GTlsDatabaseLookupFlags;
+
+/**
+ * GIOModuleScopeFlags:
+ * @G_IO_MODULE_SCOPE_NONE: No module scan flags
+ * @G_IO_MODULE_SCOPE_BLOCK_DUPLICATES: When using this scope to load or
+ * scan modules, automatically block a modules which has the same base
+ * basename as previously loaded module.
+ *
+ * Flags for use with g_io_module_scope_new().
+ *
+ * Since: 2.30
+ */
+typedef enum {
+ G_IO_MODULE_SCOPE_NONE,
+ G_IO_MODULE_SCOPE_BLOCK_DUPLICATES
+} GIOModuleScopeFlags;
+
+/**
+ * GSocketClientEvent:
+ * @G_SOCKET_CLIENT_RESOLVING: The client is doing a DNS lookup.
+ * @G_SOCKET_CLIENT_RESOLVED: The client has completed a DNS lookup.
+ * @G_SOCKET_CLIENT_CONNECTING: The client is connecting to a remote
+ * host (either a proxy or the destination server).
+ * @G_SOCKET_CLIENT_CONNECTED: The client has connected to a remote
+ * host.
+ * @G_SOCKET_CLIENT_PROXY_NEGOTIATING: The client is negotiating
+ * with a proxy to connect to the destination server.
+ * @G_SOCKET_CLIENT_PROXY_NEGOTIATED: The client has negotiated
+ * with the proxy server.
+ * @G_SOCKET_CLIENT_TLS_HANDSHAKING: The client is performing a
+ * TLS handshake.
+ * @G_SOCKET_CLIENT_TLS_HANDSHAKED: The client has performed a
+ * TLS handshake.
+ * @G_SOCKET_CLIENT_COMPLETE: The client is done with a particular
+ * #GSocketConnectable.
+ *
+ * Describes an event occurring on a #GSocketClient. See the
+ * #GSocketClient::event signal for more details.
+ *
+ * Additional values may be added to this type in the future.
+ *
+ * Since: 2.32
+ */
+typedef enum {
+ G_SOCKET_CLIENT_RESOLVING,
+ G_SOCKET_CLIENT_RESOLVED,
+ G_SOCKET_CLIENT_CONNECTING,
+ G_SOCKET_CLIENT_CONNECTED,
+ G_SOCKET_CLIENT_PROXY_NEGOTIATING,
+ G_SOCKET_CLIENT_PROXY_NEGOTIATED,
+ G_SOCKET_CLIENT_TLS_HANDSHAKING,
+ G_SOCKET_CLIENT_TLS_HANDSHAKED,
+ G_SOCKET_CLIENT_COMPLETE
+} GSocketClientEvent;
+
+/**
+ * GTestDBusFlags:
+ * @G_TEST_DBUS_NONE: No flags.
+ *
+ * Flags to define future #GTestDBus behaviour.
+ *
+ * Since: 2.34
+ */
+typedef enum /*< flags >*/ {
+ G_TEST_DBUS_NONE = 0
+} GTestDBusFlags;
+
+/**
+ * GSubprocessFlags:
+ * @G_SUBPROCESS_FLAGS_NONE: No flags.
+ * @G_SUBPROCESS_FLAGS_STDIN_PIPE: create a pipe for the stdin of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stdin_pipe().
+ * @G_SUBPROCESS_FLAGS_STDIN_INHERIT: stdin is inherited from the
+ * calling process.
+ * @G_SUBPROCESS_FLAGS_STDOUT_PIPE: create a pipe for the stdout of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stdout_pipe().
+ * @G_SUBPROCESS_FLAGS_STDOUT_SILENCE: silence the stdout of the spawned
+ * process (ie: redirect to /dev/null).
+ * @G_SUBPROCESS_FLAGS_STDERR_PIPE: create a pipe for the stderr of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stderr_pipe().
+ * @G_SUBPROCESS_FLAGS_STDERR_SILENCE: silence the stderr of the spawned
+ * process (ie: redirect to /dev/null).
+ * @G_SUBPROCESS_FLAGS_STDERR_MERGE: merge the stderr of the spawned
+ * process with whatever the stdout happens to be. This is a good way
+ * of directing both streams to a common log file, for example.
+ * @G_SUBPROCESS_FLAGS_INHERIT_FDS: spawned processes will inherit the
+ * file descriptors of their parent, unless those descriptors have
+ * been explicitly marked as close-on-exec. This flag has no effect
+ * over the "standard" file descriptors (stdin, stdout, stderr).
+ *
+ * Flags to define the behaviour of a #GSubprocess.
+ *
+ * Note that the default for stdin is to redirect from /dev/null. For
+ * stdout and stderr the default are for them to inherit the
+ * corresponding descriptor from the calling process.
+ *
+ * Note that it is a programmer error to mix 'incompatible' flags. For
+ * example, you may not request both %G_SUBPROCESS_FLAGS_STDOUT_PIPE and
+ * %G_SUBPROCESS_FLAGS_STDOUT_SILENCE.
+ *
+ * Since: 2.36
+ **/
+typedef enum {
+ G_SUBPROCESS_FLAGS_NONE = 0,
+ G_SUBPROCESS_FLAGS_STDIN_PIPE = (1u << 0),
+ G_SUBPROCESS_FLAGS_STDIN_INHERIT = (1u << 1),
+ G_SUBPROCESS_FLAGS_STDOUT_PIPE = (1u << 2),
+ G_SUBPROCESS_FLAGS_STDOUT_SILENCE = (1u << 3),
+ G_SUBPROCESS_FLAGS_STDERR_PIPE = (1u << 4),
+ G_SUBPROCESS_FLAGS_STDERR_SILENCE = (1u << 5),
+ G_SUBPROCESS_FLAGS_STDERR_MERGE = (1u << 6),
+ G_SUBPROCESS_FLAGS_INHERIT_FDS = (1u << 7)
+} GSubprocessFlags;
+
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */
projects / platform / upstream / glib.git / blobdiff