* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General
- * Public License along with this library; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place, Suite 330,
- * Boston, MA 02111-1307, USA.
+ * Public License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
* Author: Alexander Larsson <alexl@redhat.com>
*/
G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1)
} GFileCreateFlags;
+/**
+ * GFileMeasureFlags:
+ * @G_FILE_MEASURE_NONE: No flags set.
+ * @G_FILE_MEASURE_REPORT_ANY_ERROR: Report any error encountered
+ * while traversing the directory tree. Normally errors are only
+ * reported for the toplevel file.
+ * @G_FILE_MEASURE_APPARENT_SIZE: Tally usage based on apparent file
+ * sizes. Normally, the block-size is used, if available, as this is a
+ * more accurate representation of disk space used.
+ * Compare with `du --apparent-size`.
+ * @G_FILE_MEASURE_NO_XDEV: Do not cross mount point boundaries.
+ * Compare with `du -x`.
+ *
+ * Flags that can be used with g_file_measure_disk_usage().
+ *
+ * Since: 2.38
+ **/
+typedef enum {
+ G_FILE_MEASURE_NONE = 0,
+ G_FILE_MEASURE_REPORT_ANY_ERROR = (1 << 1),
+ G_FILE_MEASURE_APPARENT_SIZE = (1 << 2),
+ G_FILE_MEASURE_NO_XDEV = (1 << 3)
+} GFileMeasureFlags;
/**
* GMountMountFlags:
*/
/**
* GIOErrorEnum:
- * @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
+ * @G_IO_ERROR_FAILED: Generic error condition for when an operation fails
+ * and no more specific #GIOErrorEnum value is defined.
* @G_IO_ERROR_NOT_FOUND: File not found.
* @G_IO_ERROR_EXISTS: File already exists.
* @G_IO_ERROR_IS_DIRECTORY: File is a directory.
* @G_IO_ERROR_NO_SPACE: No space left on drive.
* @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument.
* @G_IO_ERROR_PERMISSION_DENIED: Permission denied.
- * @G_IO_ERROR_NOT_SUPPORTED: Operation not supported for the current backend.
+ * @G_IO_ERROR_NOT_SUPPORTED: Operation (or one of its parameters) not supported
* @G_IO_ERROR_NOT_MOUNTED: File isn't mounted.
* @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted.
* @G_IO_ERROR_CLOSED: File was closed.
*
* Error codes returned by GIO functions.
*
+ * Note that this domain may be extended in future GLib releases. In
+ * general, new error codes either only apply to new APIs, or else
+ * replace #G_IO_ERROR_FAILED in cases that were not explicitly
+ * distinguished before. You should therefore avoid writing code like
+ * |[<!-- language="C" -->
+ * if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED))
+ * {
+ * // Assume that this is EPRINTERONFIRE
+ * ...
+ * }
+ * ]|
+ * but should instead treat all unrecognized error codes the same as
+ * #G_IO_ERROR_FAILED.
**/
typedef enum {
G_IO_ERROR_FAILED,
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
- * them; the man pages suggest using the entire <literal>struct
- * sockaddr_un</literal> as the name, padding the unused parts of the
- * %sun_path field with zeroes; this corresponds to
- * %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
- * instead just use a portion of %sun_path, and pass an appropriate
- * smaller length to bind() or connect(). This is
+ * them; the man pages suggest using the entire `struct sockaddr_un`
+ * as the name, padding the unused parts of the %sun_path field with
+ * zeroes; this corresponds to %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED.
+ * However, many programs instead just use a portion of %sun_path, and
+ * pass an appropriate smaller length to bind() or connect(). This is
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
*
* Since: 2.26
* then request the bus to launch an owner for the name if no-one owns the name. This flag can
* only be used in proxies for well-known names.
* @G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES: If set, the property value for any <emphasis>invalidated property</emphasis> will be (asynchronously) retrieved upon receiving the <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties">PropertiesChanged</ulink> D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
+ * @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION: If the proxy is for a well-known name,
+ * do not ask the bus to launch an owner during proxy initialization, but allow it to be
+ * autostarted by a method call. This flag is only meaningful in proxies for well-known names,
+ * and only if %G_DBUS_PROXY_FLAGS_DO_NOT_AUTOSTART is not also specified.
*
* Flags used when constructing an instance of a #GDBusProxy derived class.
*
G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2),
- G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3)
+ G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3),
+ G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION = (1<<4)
} GDBusProxyFlags;
/**
* Existing file and the operation you're using does not silently overwrite.
* @G_DBUS_ERROR_UNKNOWN_METHOD:
* Method name you invoked isn't known by the object you invoked it on.
+ * @G_DBUS_ERROR_UNKNOWN_OBJECT:
+ * Object you invoked a method on isn't known. Since 2.42
+ * @G_DBUS_ERROR_UNKNOWN_INTERFACE:
+ * Interface you invoked a method on isn't known by the object. Since 2.42
+ * @G_DBUS_ERROR_UNKNOWN_PROPERTY:
+ * Property you tried to access isn't known by the object. Since 2.42
+ * @G_DBUS_ERROR_PROPERTY_READ_ONLY:
+ * Property you tried to set is read-only. Since 2.42
* @G_DBUS_ERROR_TIMED_OUT:
* Certain timeout errors, e.g. while starting a service. Warning: this is
* confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */
G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */
G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */
- G_DBUS_ERROR_OBJECT_PATH_IN_USE /* org.freedesktop.DBus.Error.ObjectPathInUse */
+ G_DBUS_ERROR_OBJECT_PATH_IN_USE, /* org.freedesktop.DBus.Error.ObjectPathInUse */
+ G_DBUS_ERROR_UNKNOWN_OBJECT, /* org.freedesktop.DBus.Error.UnknownObject */
+ G_DBUS_ERROR_UNKNOWN_INTERFACE, /* org.freedesktop.DBus.Error.UnknownInterface */
+ G_DBUS_ERROR_UNKNOWN_PROPERTY, /* org.freedesktop.DBus.Error.UnknownProperty */
+ G_DBUS_ERROR_PROPERTY_READ_ONLY /* org.freedesktop.DBus.Error.PropertyReadOnly */
} GDBusError;
/* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */
* assign a serial number from the #GDBusConnection object when
* sending a message.
*
- * Flags used when sending #GDBusMessage<!-- -->s on a #GDBusConnection.
+ * Flags used when sending #GDBusMessages on a #GDBusConnection.
*
* Since: 2.26
*/
* @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
* @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a <type>struct cmsgcred</type>.
+ * @G_CREDENTIALS_TYPE_NETBSD_UNPCBID: The native credentials type is a <type>struct unpcbid</type>.
* @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a <type>struct sockpeercred</type>. Added in 2.30.
+ * @G_CREDENTIALS_TYPE_SOLARIS_UCRED: The native credentials type is a <type>ucred_t</type>. Added in 2.40.
*
* Enumeration describing different kinds of native credential types.
*
G_CREDENTIALS_TYPE_INVALID,
G_CREDENTIALS_TYPE_LINUX_UCRED,
G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED,
- G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED
+ G_CREDENTIALS_TYPE_NETBSD_UNPCBID,
+ G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED,
+ G_CREDENTIALS_TYPE_SOLARIS_UCRED
} GCredentialsType;
/**
} GTlsDatabaseLookupFlags;
/**
+ * GTlsCertificateRequestFlags:
+ * @G_TLS_CERTIFICATE_REQUEST_NONE: No flags
+ *
+ * Flags for g_tls_interaction_request_certificate(),
+ * g_tls_interaction_request_certificate_async(), and
+ * g_tls_interaction_invoke_request_certificate().
+ *
+ * Since: 2.40
+ */
+typedef enum {
+ G_TLS_CERTIFICATE_REQUEST_NONE = 0
+} GTlsCertificateRequestFlags;
+
+/**
* GIOModuleScopeFlags:
* @G_IO_MODULE_SCOPE_NONE: No module scan flags
* @G_IO_MODULE_SCOPE_BLOCK_DUPLICATES: When using this scope to load or
G_TEST_DBUS_NONE = 0
} GTestDBusFlags;
+/**
+ * GSubprocessFlags:
+ * @G_SUBPROCESS_FLAGS_NONE: No flags.
+ * @G_SUBPROCESS_FLAGS_STDIN_PIPE: create a pipe for the stdin of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stdin_pipe().
+ * @G_SUBPROCESS_FLAGS_STDIN_INHERIT: stdin is inherited from the
+ * calling process.
+ * @G_SUBPROCESS_FLAGS_STDOUT_PIPE: create a pipe for the stdout of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stdout_pipe().
+ * @G_SUBPROCESS_FLAGS_STDOUT_SILENCE: silence the stdout of the spawned
+ * process (ie: redirect to /dev/null).
+ * @G_SUBPROCESS_FLAGS_STDERR_PIPE: create a pipe for the stderr of the
+ * spawned process that can be accessed with
+ * g_subprocess_get_stderr_pipe().
+ * @G_SUBPROCESS_FLAGS_STDERR_SILENCE: silence the stderr of the spawned
+ * process (ie: redirect to /dev/null).
+ * @G_SUBPROCESS_FLAGS_STDERR_MERGE: merge the stderr of the spawned
+ * process with whatever the stdout happens to be. This is a good way
+ * of directing both streams to a common log file, for example.
+ * @G_SUBPROCESS_FLAGS_INHERIT_FDS: spawned processes will inherit the
+ * file descriptors of their parent, unless those descriptors have
+ * been explicitly marked as close-on-exec. This flag has no effect
+ * over the "standard" file descriptors (stdin, stdout, stderr).
+ *
+ * Flags to define the behaviour of a #GSubprocess.
+ *
+ * Note that the default for stdin is to redirect from /dev/null. For
+ * stdout and stderr the default are for them to inherit the
+ * corresponding descriptor from the calling process.
+ *
+ * Note that it is a programmer error to mix 'incompatible' flags. For
+ * example, you may not request both %G_SUBPROCESS_FLAGS_STDOUT_PIPE and
+ * %G_SUBPROCESS_FLAGS_STDOUT_SILENCE.
+ *
+ * Since: 2.40
+ **/
+typedef enum {
+ G_SUBPROCESS_FLAGS_NONE = 0,
+ G_SUBPROCESS_FLAGS_STDIN_PIPE = (1u << 0),
+ G_SUBPROCESS_FLAGS_STDIN_INHERIT = (1u << 1),
+ G_SUBPROCESS_FLAGS_STDOUT_PIPE = (1u << 2),
+ G_SUBPROCESS_FLAGS_STDOUT_SILENCE = (1u << 3),
+ G_SUBPROCESS_FLAGS_STDERR_PIPE = (1u << 4),
+ G_SUBPROCESS_FLAGS_STDERR_SILENCE = (1u << 5),
+ G_SUBPROCESS_FLAGS_STDERR_MERGE = (1u << 6),
+ G_SUBPROCESS_FLAGS_INHERIT_FDS = (1u << 7)
+} GSubprocessFlags;
+
+/**
+ * GNotificationPriority:
+ * @G_NOTIFICATION_PRIORITY_LOW: for notifications that do not require
+ * immediate attention - typically used for contextual background
+ * information, such as contact birthdays or local weather
+ * @G_NOTIFICATION_PRIORITY_NORMAL: the default priority, to be used for the
+ * majority of notifications (for example email messages, software updates,
+ * completed download/sync operations)
+ * @G_NOTIFICATION_PRIORITY_HIGH: for events that require more attention,
+ * usually because responses are time-sensitive (for example chat and SMS
+ * messages or alarms)
+ * @G_NOTIFICATION_PRIORITY_URGENT: for urgent notifications, or notifications
+ * that require a response in a short space of time (for example phone calls
+ * or emergency warnings)
+ *
+ * Priority levels for #GNotifications.
+ *
+ * Since: 2.42
+ */
+typedef enum {
+ G_NOTIFICATION_PRIORITY_NORMAL,
+ G_NOTIFICATION_PRIORITY_LOW,
+ G_NOTIFICATION_PRIORITY_HIGH,
+ G_NOTIFICATION_PRIORITY_URGENT
+} GNotificationPriority;
+
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */