-# Copyright 2003, 2004 Free Software Foundation, Inc.
+# Copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
set testfile "annota3"
set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
+set binfile ${objdir}/${subdir}/${testfile}$EXEEXT
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
+ untested annota3.exp
+ return -1
}
"set annotate 3"
}
-
+#
+# if construct:
+#
+send_gdb "if 1\n"
+gdb_expect {
+ -re "^if 1\r\n\r\n\032\032post-prompt\r\n\r\n\032\032pre-commands\r\n >\r\n\032\032commands\r\n$" {
+ pass "start if construct"
+ }
+ -re ".*\032\032commands\r\n" {
+ fail "start if construct"
+ }
+ timeout { fail "start if construct (timeout)" }
+}
+send_gdb "end\n"
+gdb_expect {
+ -re "^end\r\n\r\n\032\032post-commands\r\n$gdb_prompt$" {
+ pass "end if construct"
+ }
+ -re ".*$gdb_prompt$" {
+ fail "end if construct"
+ }
+ timeout { fail "end if construct (timeout)" }
+}
#
# info break:
#
send_gdb "info break\n"
gdb_expect_list "breakpoint info" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "Num Type Disp Enb Address +What\r\n"
- "1 breakpoint keep y 0x\[0-9a-zA-Z\]+ +in main at .*annota3.c:32\r\n"
+ "Num Type Disp Enb Address +What\r\n"
+ "1 breakpoint keep y 0x\[0-9a-zA-Z\]+ +in main at .*annota3.c:32\r\n"
}
send_gdb "run\n"
gdb_expect_list "run until main breakpoint" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "Starting program: .*annota3 \r\n"
- "\(\r\n\032\032\(frames-invalid|breakpoints-invalid\)\r\n\)+"
+ "Starting program: .*annota3(|\.exe) \r\n"
"\r\n\032\032starting\r\n"
- "\(\r\n\032\032\(frames-invalid|breakpoints-invalid\)\r\n\)+"
"\r\n\032\032breakpoint 1\r\n"
"\r\n"
- "Breakpoint 1, main \\(\\) at .*annota3.c:32\r\n"
+ "Breakpoint 1, "
+ "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"
+ "main \\(\\) at .*annota3.c:32\r\n"
"\r\n\032\032source.*annota3.c:32:.*:beg:0x\[0-9a-z\]+\r\n"
"\r\n\032\032stopped\r\n"
}
gdb_expect_list "go after array init line" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n"
- "\(\r\n\032\032frames-invalid\r\n\)+"
"\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"\r\n\032\032stopped\r\n"
}
send_gdb "break handle_USR1\n"
gdb_expect_list "breakpoint handle_USR1" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "\r\n\032\032breakpoints-invalid\r\n"
"Breakpoint.*at 0x\[0-9a-z\]+: file.*annota3.c, line.*\r\n"
}
send_gdb "break printf\n"
gdb_expect_list "breakpoint printf" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "\r\n\032\032breakpoints-invalid\r\n"
"Breakpoint.*at 0x\[0-9a-z\]+.*"
}
"\r\n\032\032post-prompt\r\n"
"Continuing.\r\n"
"\r\n\032\032starting\r\n"
- "\r\n\032\032frames-invalid\r\n"
"\r\n\032\032breakpoint 3\r\n"
"\r\n"
"Breakpoint 3, \[^\r\n\]*\r\n"
send_gdb "backtrace\n"
gdb_expect_list "backtrace from shlibrary" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "#0 .* printf \[^\r\n\]*\r\n"
+ "#0 .* .*printf(@\[^ ]*)? \[^\r\n\]*\r\n"
"#1 .* main \[^\r\n\]*\r\n"
}
#
# test printing a frame with some arguments:
#
-send_gdb "signal SIGUSR1\n"
-gdb_expect_list "send SIGUSR1" "$gdb_prompt$" {
- "\r\n\032\032post-prompt\r\n"
- "Continuing with signal SIGUSR1.\r\n"
- "\r\n\032\032starting\r\n"
- "\r\n\032\032frames-invalid\r\n"
- "\r\n\032\032breakpoint 2\r\n"
- "Breakpoint 2, handle_USR1 \\(sig=\[0-9\]+\\) at .*annota3.c:\[0-9\]+\r\n"
- "\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
- "\r\n\032\032stopped\r\n"
-}
+if [target_info exists gdb,nosignals] {
+ unsupported "send SIGUSR1"
+ unsupported "backtrace @ signal handler"
+} else {
+ send_gdb "signal SIGUSR1\n"
+ gdb_expect_list "send SIGUSR1" "$gdb_prompt$" {
+ "\r\n\032\032post-prompt\r\n"
+ "Continuing with signal SIGUSR1.\r\n"
+ "\r\n\032\032starting\r\n"
+ "\r\n\032\032breakpoint 2\r\n"
+ "\r\n"
+ "Breakpoint 2, "
+ "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"
+ "handle_USR1 \\(sig=\[0-9\]+\\) at .*annota3.c:\[0-9\]+\r\n"
+ "\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
+ "\r\n\032\032stopped\r\n"
+ }
-#
-# test:
-#
-verbose "match_max local is: [match_max]"
-verbose "match_max default is: [match_max -d]"
-# This is necessary because a 2000 buffer is not enought to get everything
-# up to the prompt ad the test gets a timeout.
-match_max 3000
-verbose "match_max now is: [match_max]"
-send_gdb "backtrace\n"
-gdb_expect_list "backtrace @ signal handler" "$gdb_prompt$" {
- "#0 +handle_USR1 \[^\r\n\]+\r\n"
- "#1 +.signal handler called.\r\n"
- "#2 .* printf \[^\r\n\]+\r\n"
- "#3 .* main \[^\r\n\]+\r\n"
+ #
+ # test:
+ #
+ verbose "match_max local is: [match_max]"
+ verbose "match_max default is: [match_max -d]"
+ # This is necessary because a 2000 buffer is not enought to get everything
+ # up to the prompt ad the test gets a timeout.
+ match_max 3000
+ verbose "match_max now is: [match_max]"
+ send_gdb "backtrace\n"
+ gdb_expect_list "backtrace @ signal handler" "$gdb_prompt$" {
+ "#0 +handle_USR1 \[^\r\n\]+\r\n"
+ "#1 +.signal handler called.\r\n"
+ "#2 .* .*printf(@\[^ \]*)? \[^\r\n\]+\r\n"
+ "#3 .* main \[^\r\n\]+\r\n"
+ }
}
#
send_gdb "break main\n"
gdb_expect_list "break at 28" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "\r\n\032\032breakpoints-invalid\r\n"
"Breakpoint 4 at 0x\[0-9a-z\]+: file .*annota3.c, line 32.\r\n"
}
#
# Test that breakpoints-invalid is issued once and only once for
# breakpoint ignore count changes, after annotation stopped.
-#
+# NOTE: breakpoints-invalid annotations have been removed from
+# level 3 but keep these tests for continuity and comparison
+# with annota1.exp.
send_gdb "break 46\n"
gdb_expect_list "break at 46" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "\r\n\032\032breakpoints-invalid\r\n"
"Breakpoint 5 at 0x\[0-9a-z\]+: file .*annota3.c, line 46.\r\n"
}
gdb_expect_list "ignore 5 4" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Will ignore next 4 crossings of breakpoint 5"
- "\r\n\032\032breakpoints-invalid\r\n"
"\r\n"
}
send_gdb "continue\n"
gdb_expect_list "annotate ignore count change" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
- "\(\r\n\032\032frames-invalid\r\n\)+"
"\r\n\032\032breakpoint 5\r\n"
- "Breakpoint 5, main \\(\\) at .*annota3.c:46\r\n"
+ "\r\n"
+ "Breakpoint 5, "
+ "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"
+ "main \\(\\) at .*annota3.c:46\r\n"
"\r\n\032\032source .*annota3.c:46:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"1: value = 11\r\n"
"\r\n\032\032stopped\r\n"
- "\r\n\032\032breakpoints-invalid\r\n"
}
# check that ignore command is working, or the above can provide
gdb_expect_list "next to exit loop" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n"
- "\(\r\n\032\032frames-invalid\r\n\)+"
"\r\n\032\032source.*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"1: value = 12\r\n"
"\r\n\032\032stopped\r\n"
gdb_expect_list "breakpoint ignore count" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n"
- "\(\r\n\032\032frames-invalid\r\n\)+"
"\r\n\032\032source.*annota3.c:49:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"1: value = 12\r\n"
"\r\n\032\032stopped\r\n"
# It has been verified that other signals will be delivered. However,
# rather than twiddle the test, I choose to leave it as-is as it
# exposes an interesting failure on hpux11.
-setup_xfail hppa*-*-hpux11*
-send_gdb "signal SIGTRAP\n"
-gdb_expect_list "signal sent" "$gdb_prompt$" {
- "\r\n\032\032post-prompt\r\n"
- "Continuing with signal SIGTRAP.\r\n"
- "\r\n\032\032starting\r\n"
- "\r\n\032\032frames-invalid\r\n"
- "\r\n\032\032frames-invalid\r\n"
- "\r\n\032\032signalled\r\n"
- "\r\nProgram terminated with signal SIGTRAP, Trace.breakpoint trap.\r\n"
- "The program no longer exists.\r\n"
- "\r\n\032\032stopped\r\n"
+
+if [target_info exists gdb,nosignals] {
+ unsupported "signal sent"
+} else {
+ setup_xfail hppa*-*-hpux11*
+ send_gdb "signal SIGTRAP\n"
+ gdb_expect_list "signal sent" "$gdb_prompt$" {
+ "\r\n\032\032post-prompt\r\n"
+ "Continuing with signal SIGTRAP.\r\n"
+ "\r\n\032\032starting\r\n"
+ "\r\n\032\032signalled\r\n"
+ "\r\nProgram terminated with signal SIGTRAP, Trace.breakpoint trap.\r\n"
+ "The program no longer exists.\r\n"
+ "\r\n\032\032stopped\r\n"
+ }
}