-/* Remote serial interface using Hitachi E7000 PC ISA card in a PC
-
- Copyright 1994 Free Software Foundation, Inc.
+/* Remote serial interface using Renesas E7000 PC ISA card in a PC
+ Copyright (C) 1994, 1996, 1997, 1998, 1999, 2000
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-#if defined __GO32__ || defined _WIN32
#include "defs.h"
+#if defined __GO32__ || defined _WIN32
#include "serial.h"
#include "gdb_string.h"
-/* MSVC uses strnicmp instead of strncasecmp */
-#ifdef _MSC_VER
-#define strncasecmp strnicmp
-#define WIN32_LEAN_AND_MEAN
-#endif
-
#ifdef _WIN32
+#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#endif
#include <sys/dos.h>
#endif
-static int e7000pc_open PARAMS ((serial_t scb, const char *name));
-static void e7000pc_raw PARAMS ((serial_t scb));
-static int e7000pc_readchar PARAMS ((serial_t scb, int timeout));
-static int e7000pc_setbaudrate PARAMS ((serial_t scb, int rate));
-static int e7000pc_write PARAMS ((serial_t scb, const char *str, int len));
-static void e7000pc_close PARAMS ((serial_t scb));
-static serial_ttystate e7000pc_get_tty_state PARAMS ((serial_t scb));
-static int e7000pc_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+static int e7000pc_open (struct serial *scb, const char *name);
+static void e7000pc_raw (struct serial *scb);
+static int e7000pc_readchar (struct serial *scb, int timeout);
+static int e7000pc_setbaudrate (struct serial *scb, int rate);
+static int e7000pc_write (struct serial *scb, const char *str, int len);
+static void e7000pc_close (struct serial *scb);
+static serial_ttystate e7000pc_get_tty_state (struct serial *scb);
+static int e7000pc_set_tty_state (struct serial *scb, serial_ttystate state);
#define OFF_DPD 0x0000
#define OFF_DDP 0x1000
#define OFF_READY 0x300c
#define OFF_PON 0x300e
-#define IDLE 0x0000
-#define CMD_CI 0x4349
-#define CMD_CO 0x434f
-#define CMD_LO 0x4c4f
-#define CMD_LS 0x4c53
-#define CMD_SV 0x5356
-#define CMD_SS 0x5353
-#define CMD_OK 0x4f4b
-#define CMD_ER 0x4552
-#define CMD_NF 0x4e46
-#define CMD_AB 0x4142
-#define CMD_ED 0x4544
-#define CMD_CE 0x4345
+#define IDLE 0x0000
+#define CMD_CI 0x4349
+#define CMD_CO 0x434f
+#define CMD_LO 0x4c4f
+#define CMD_LS 0x4c53
+#define CMD_SV 0x5356
+#define CMD_SS 0x5353
+#define CMD_OK 0x4f4b
+#define CMD_ER 0x4552
+#define CMD_NF 0x4e46
+#define CMD_AB 0x4142
+#define CMD_ED 0x4544
+#define CMD_CE 0x4345
static unsigned long fa;
static unsigned long irqtod;
static unsigned long ready;
static unsigned long fb;
-static unsigned long cpd ;
-static unsigned long cdp ;
+static unsigned long cpd;
+static unsigned long cdp;
static unsigned long ready;
static unsigned long pon;
static unsigned long irqtop;
#define dosmemput(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN))
#endif
-static struct sw
-{
- int sw;
- int addr;
-} sigs[] = {
- {0x14, 0xd0000},
- {0x15, 0xd4000},
- {0x16, 0xd8000},
- {0x17, 0xdc000},
- 0};
-
-#ifdef _MSC_VER
-/* Get the base of the data segment. This is needed to calculate the offset
- between data segment addresses and the base of linear memory, which is where
- device registers reside. Note that this is really only necessary for
- Win32s, since Win95 and NT keep the data segment at linear 0. */
-
-static unsigned long
-get_ds_base (void)
+static struct sw
+ {
+ int sw;
+ int addr;
+ }
+sigs[] =
{
- unsigned short dsval;
- LDT_ENTRY ldt;
- unsigned long dsbase;
-
- __asm
- {
- mov dsval,ds
- }
-
- dsbase = 0;
-
- GetThreadSelectorEntry (GetCurrentThread(), dsval, &ldt);
-
- dsbase = ldt.HighWord.Bits.BaseHi << 24 | ldt.HighWord.Bits.BaseMid << 16
- | ldt.BaseLow;
+ {
+ 0x14, 0xd0000
+ }
+ ,
+ {
+ 0x15, 0xd4000
+ }
+ ,
+ {
+ 0x16, 0xd8000
+ }
+ ,
+ {
+ 0x17, 0xdc000
+ }
+ ,
+ 0
+};
- return dsbase;
-}
-#else /* !_MSC_VER */
#define get_ds_base() 0
-#endif /* _MSC_VER */
static int
-e7000pc_init ()
+e7000pc_init (void)
{
int try;
unsigned long dsbase;
-
+
dsbase = get_ds_base ();
/* Look around in memory for the board's signature */
fb = board_at + OFF_FB;
cpd = board_at + OFF_CPD;
cdp = board_at + OFF_CDP;
- ready =board_at + OFF_READY;
- pon = board_at + OFF_PON;
+ ready = board_at + OFF_READY;
+ pon = board_at + OFF_PON;
irqtop = board_at + OFF_IRQTOP;
irqtod = board_at + OFF_IRQTOD;
-
+
val = GET_WORD (ready);
- if (val == (0xaaa0 | sigs[try].sw))
+ if (val == (0xaaa0 | sigs[try].sw))
{
if (GET_WORD (pon) & 0xf)
{
SET_WORD (fa, 0);
SET_WORD (fb, 0);
- SET_WORD (irqtop, 1); /* Disable interrupts from e7000 */
+ SET_WORD (irqtop, 1); /* Disable interrupts from e7000 */
SET_WORD (ready, 1);
- printf_filtered ("\nConnected to the E7000PC at address 0x%x\n",
+ printf_filtered ("\nConnected to the E7000PC at address 0x%x\n",
sigs[try].addr);
- return 1;
+ return 1;
}
- error ("The E7000 PC board is working, but the E7000 is turned off.\n");
+ error (_("The E7000 PC board is working, but the E7000 is turned off."));
return 0;
}
}
- error ("GDB cannot connect to the E7000 PC board, check that it is installed\n\
+ error (_("GDB cannot connect to the E7000 PC board, check that it is installed\n\
and that the switch settings are correct. Some other DOS programs can \n\
stop the board from working. Try starting from a very minimal boot, \n\
perhaps you need to disable EMM386 over the region where the board has\n\
-its I/O space, remove other unneeded cards, etc etc\n");
+its I/O space, remove other unneeded cards, etc etc\n"));
return 0;
}
/* Return next byte from cdp. If no more, then return -1. */
-static int
+static int
e7000_get (void)
{
static char pbuf[1000];
char tmp[1000];
int x;
- if (pbuf_index < pbuf_size)
+ if (pbuf_index < pbuf_size)
{
x = pbuf[pbuf_index++];
}
dosmemget (cdp + 8, pbuf_size + 1, tmp);
/* Tell the E7000 we've eaten */
- SET_WORD (fb, 0);
+ SET_WORD (fb, 0);
/* Swap it around */
- for (i = 0; i < pbuf_size; i++)
+ for (i = 0; i < pbuf_size; i++)
{
- pbuf[i] = tmp[i^1];
+ pbuf[i] = tmp[i ^ 1];
}
pbuf_index = 0;
- x = pbuf[pbuf_index++];
+ x = pbuf[pbuf_index++];
}
- else
- {
+ else
+ {
x = -1;
}
return x;
that TIMEOUT == 0 is a poll, and TIMEOUT == -1 means wait forever. */
static int
-dosasync_read (fd, buf, len, timeout)
- int fd;
- char *buf;
- int len;
- int timeout;
-
+dosasync_read (int fd, char *buf, int len, int timeout)
{
long now;
long then;
then = now + timeout;
while (i < len)
{
- int ch = e7000_get();
-
+ int ch = e7000_get ();
+
/* While there's room in the buffer, and we've already
- read the stuff in, suck it over */
- if (ch != -1)
+ read the stuff in, suck it over */
+ if (ch != -1)
{
buf[i++] = ch;
- while (i < len && pbuf_index < pbuf_size )
+ while (i < len && pbuf_index < pbuf_size)
{
- ch = e7000_get();
+ ch = e7000_get ();
if (ch == -1)
break;
buf[i++] = ch;
static int
-dosasync_write (fd, buf, len)
- int fd;
- const char *buf;
- int len;
+dosasync_write (int fd, const char *buf, int len)
{
int i;
- char dummy[1000];
-
+ char dummy[1000];
+
/* Construct copy locally */
- ((short *)dummy)[0] = CMD_CI;
- ((short *)dummy)[1] = len;
- ((short *)dummy)[2] = 0;
- ((short *)dummy)[3] = 0;
- for (i = 0; i < len ; i++)
+ ((short *) dummy)[0] = CMD_CI;
+ ((short *) dummy)[1] = len;
+ ((short *) dummy)[2] = 0;
+ ((short *) dummy)[3] = 0;
+ for (i = 0; i < len; i++)
{
- dummy[8 + i ^ 1] = buf[i];
+ dummy[(8 + i) ^ 1] = buf[i];
}
/* Wait for the card to get ready */
- while (GET_WORD (fa) & 1) ;
+ while (GET_WORD (fa) & 1);
/* Blast onto the ISA card */
- dosmemput (dummy, 8 + len + 1, cpd);
+ dosmemput (dummy, 8 + len + 1, cpd);
SET_WORD (fa, 1);
- SET_WORD (irqtod, 1); /* Interrupt the E7000 */
+ SET_WORD (irqtod, 1); /* Interrupt the E7000 */
return len;
}
static int
-e7000pc_open (scb, name)
- serial_t scb;
- const char *name;
+e7000pc_open (struct serial *scb, const char *name)
{
if (strncasecmp (name, "pc", 2) != 0)
{
}
static int
-e7000pc_noop (scb)
- serial_t scb;
+e7000pc_noop (struct serial *scb)
{
return 0;
}
static void
-e7000pc_raw (scb)
- serial_t scb;
+e7000pc_raw (struct serial *scb)
{
/* Always in raw mode */
}
static int
-e7000pc_readchar (scb, timeout)
- serial_t scb;
- int timeout;
+e7000pc_readchar (struct serial *scb, int timeout)
{
char buf;
- top:
+top:
if (dosasync_read (scb->fd, &buf, 1, timeout))
{
- if (buf == 0) goto top;
+ if (buf == 0)
+ goto top;
return buf;
}
else
return SERIAL_TIMEOUT;
}
-struct e7000pc_ttystate {
+struct e7000pc_ttystate
+{
int dummy;
};
vector. Someday, they may do something real... */
static serial_ttystate
-e7000pc_get_tty_state (scb)
- serial_t scb;
+e7000pc_get_tty_state (struct serial *scb)
{
struct e7000pc_ttystate *state;
}
static int
-e7000pc_set_tty_state (scb, ttystate)
- serial_t scb;
- serial_ttystate ttystate;
+e7000pc_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
return 0;
}
static int
-e7000pc_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
- serial_t scb;
- serial_ttystate new_ttystate;
- serial_ttystate old_ttystate;
+e7000pc_noflush_set_tty_state (struct serial *scb,
+ serial_ttystate new_ttystate,
+ serial_ttystate old_ttystate)
{
return 0;
}
static void
-e7000pc_print_tty_state (scb, ttystate)
- serial_t scb;
- serial_ttystate ttystate;
+e7000pc_print_tty_state (struct serial *scb,
+ serial_ttystate ttystate,
+ struct ui_file *stream)
{
/* Nothing to print. */
return;
}
static int
-e7000pc_setbaudrate (scb, rate)
- serial_t scb;
- int rate;
+e7000pc_setbaudrate (struct serial *scb, int rate)
+{
+ return 0;
+}
+
+static int
+e7000pc_setstopbits (struct serial *scb, int rate)
{
return 0;
}
static int
-e7000pc_write (scb, str, len)
- serial_t scb;
- const char *str;
- int len;
+e7000pc_write (struct serial *scb, const char *str, int len)
{
dosasync_write (scb->fd, str, len);
}
static void
-e7000pc_close (scb)
- serial_t scb;
+e7000pc_close (struct serial *scb)
{
}
e7000pc_print_tty_state,
e7000pc_noflush_set_tty_state,
e7000pc_setbaudrate,
+ e7000pc_setstopbits,
+ e7000pc_noop, /* wait for output to drain */
};
-void
-_initialize_ser_e7000pc ()
-{
- serial_add_interface (&e7000pc_ops);
-}
-#else
+#endif /*_WIN32 or __GO32__*/
+
+extern initialize_file_ftype _initialize_ser_e7000pc; /* -Wmissing-prototypes */
void
-_initialize_ser_e7000pc ()
+_initialize_ser_e7000pc (void)
{
-
+#if defined __GO32__ || defined _WIN32
+ serial_add_interface (&e7000pc_ops);
+#endif
}
-#endif