/* Definitions for symbol file management in GDB.
- Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
- 2001, 2002, 2003 Free Software Foundation, Inc.
+ Copyright (C) 1992-2014 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#if !defined (OBJFILES_H)
#define OBJFILES_H
#include "gdb_obstack.h" /* For obstack internals. */
-#include "symfile.h" /* For struct psymbol_allocation_list */
+#include "symfile.h" /* For struct psymbol_allocation_list. */
+#include "progspace.h"
+#include "registry.h"
+#include "gdb_bfd.h"
struct bcache;
struct htab;
to the user executable's recorded entry point, as if the call had been made
directly by the kernel.
- The traditional gdb method of using this info is to use the
- recorded entry point to set the variables
- deprecated_entry_file_lowpc and deprecated_entry_file_highpc from
+ The traditional gdb method of using this info was to use the
+ recorded entry point to set the entry-file's lowpc and highpc from
the debugging information, where these values are the starting
address (inclusive) and ending address (exclusive) of the
instruction space in the executable which correspond to the
- "startup file", I.E. crt0.o in most cases. This file is assumed to
+ "startup file", i.e. crt0.o in most cases. This file is assumed to
be a startup file and frames with pc's inside it are treated as
nonexistent. Setting these variables is necessary so that
backtraces do not fly off the bottom of the stack.
NOTE: cagney/2003-09-09: It turns out that this "traditional"
method doesn't work. Corinna writes: ``It turns out that the call
- to deprecated_inside_entry_file destroys a meaningful backtrace
- under some conditions. E. g. the backtrace tests in the asm-source
+ to test for "inside entry file" destroys a meaningful backtrace
+ under some conditions. E.g. the backtrace tests in the asm-source
testcase are broken for some targets. In this test the functions
are all implemented as part of one file and the testcase is not
necessarily linked with a start file (depending on the target).
struct entry_info
{
-
- /* The value we should use for this objects entry point.
- The illegal/unknown value needs to be something other than 0, ~0
- for instance, which is much less likely than 0. */
-
+ /* The unrelocated value we should use for this objfile entry point. */
CORE_ADDR entry_point;
-#define INVALID_ENTRY_POINT (~0) /* ~0 will not be in any file, we hope. */
-
- /* Start (inclusive) and end (exclusive) of function containing the
- entry point. */
-
- CORE_ADDR entry_func_lowpc;
- CORE_ADDR entry_func_highpc;
-
- /* Start (inclusive) and end (exclusive) of object file containing the
- entry point. */
-
- CORE_ADDR deprecated_entry_file_lowpc;
- CORE_ADDR deprecated_entry_file_highpc;
-
- /* Start (inclusive) and end (exclusive) of the user code main() function. */
+ /* The index of the section in which the entry point appears. */
+ int the_bfd_section_index;
- CORE_ADDR main_func_lowpc;
- CORE_ADDR main_func_highpc;
-
-/* Use these values when any of the above ranges is invalid. */
-
-/* We use these values because it guarantees that there is no number that is
- both >= LOWPC && < HIGHPC. It is also highly unlikely that 3 is a valid
- module or function start address (as opposed to 0). */
-
-#define INVALID_ENTRY_LOWPC (3)
-#define INVALID_ENTRY_HIGHPC (1)
+ /* Set to 1 iff ENTRY_POINT contains a valid value. */
+ unsigned entry_point_p : 1;
+ /* Set to 1 iff this object was initialized. */
+ unsigned initialized : 1;
};
-/* Sections in an objfile.
-
- It is strange that we have both this notion of "sections"
- and the one used by section_offsets. Section as used
- here, (currently at least) means a BFD section, and the sections
- are set up from the BFD sections in allocate_objfile.
-
- The sections in section_offsets have their meaning determined by
- the symbol format, and they are set up by the sym_offsets function
- for that symbol file format.
-
- I'm not sure this could or should be changed, however. */
+/* Sections in an objfile. The section offsets are stored in the
+ OBJFILE. */
struct obj_section
{
- CORE_ADDR addr; /* lowest address in section */
- CORE_ADDR endaddr; /* 1+highest address in section */
-
- /* This field is being used for nefarious purposes by syms_from_objfile.
- It is said to be redundant with section_offsets; it's not really being
- used that way, however, it's some sort of hack I don't understand
- and am not going to try to eliminate (yet, anyway). FIXME.
-
- It was documented as "offset between (end)addr and actual memory
- addresses", but that's not true; addr & endaddr are actual memory
- addresses. */
- CORE_ADDR offset;
-
struct bfd_section *the_bfd_section; /* BFD section pointer */
/* Objfile this section is part of. */
struct objfile *objfile;
- /* True if this "overlay section" is mapped into an "overlay region". */
+ /* True if this "overlay section" is mapped into an "overlay region". */
int ovly_mapped;
};
-/* An import entry contains information about a symbol that
- is used in this objfile but not defined in it, and so needs
- to be imported from some other objfile */
-/* Currently we just store the name; no attributes. 1997-08-05 */
-typedef char *ImportEntry;
+/* Relocation offset applied to S. */
+#define obj_section_offset(s) \
+ (((s)->objfile->section_offsets)->offsets[gdb_bfd_section_index ((s)->objfile->obfd, (s)->the_bfd_section)])
+/* The memory address of section S (vma + offset). */
+#define obj_section_addr(s) \
+ (bfd_get_section_vma ((s)->objfile->obfd, s->the_bfd_section) \
+ + obj_section_offset (s))
-/* An export entry contains information about a symbol that
- is defined in this objfile and available for use in other
- objfiles */
-typedef struct
- {
- char *name; /* name of exported symbol */
- int address; /* offset subject to relocation */
- /* Currently no other attributes 1997-08-05 */
- }
-ExportEntry;
-
+/* The one-passed-the-end memory address of section S
+ (vma + size + offset). */
+#define obj_section_endaddr(s) \
+ (bfd_get_section_vma ((s)->objfile->obfd, s->the_bfd_section) \
+ + bfd_get_section_size ((s)->the_bfd_section) \
+ + obj_section_offset (s))
/* The "objstats" structure provides a place for gdb to record some
interesting information about its internal state at runtime, on a
per objfile basis, such as information about the number of symbols
- read, size of string table (if any), etc. */
+ read, size of string table (if any), etc. */
struct objstats
{
- int n_minsyms; /* Number of minimal symbols read */
int n_psyms; /* Number of partial symbols read */
int n_syms; /* Number of full symbols read */
int n_stabs; /* Number of ".stabs" read (if applicable) */
/* Number of entries in the minimal symbol hash table. */
#define MINIMAL_SYMBOL_HASH_SIZE 2039
+/* Some objfile data is hung off the BFD. This enables sharing of the
+ data across all objfiles using the BFD. The data is stored in an
+ instance of this structure, and associated with the BFD using the
+ registry system. */
+
+struct objfile_per_bfd_storage
+{
+ /* The storage has an obstack of its own. */
+
+ struct obstack storage_obstack;
+
+ /* Byte cache for file names. */
+
+ struct bcache *filename_cache;
+
+ /* Byte cache for macros. */
+ struct bcache *macro_cache;
+
+ /* The gdbarch associated with the BFD. Note that this gdbarch is
+ determined solely from BFD information, without looking at target
+ information. The gdbarch determined from a running target may
+ differ from this e.g. with respect to register types and names. */
+
+ struct gdbarch *gdbarch;
+
+ /* Hash table for mapping symbol names to demangled names. Each
+ entry in the hash table is actually two consecutive strings,
+ both null-terminated; the first one is a mangled or linkage
+ name, and the second is the demangled name or just a zero byte
+ if the name doesn't demangle. */
+ struct htab *demangled_names_hash;
+
+ /* The per-objfile information about the entry point, the scope (file/func)
+ containing the entry point, and the scope of the user's main() func. */
+
+ struct entry_info ei;
+
+ /* The name and language of any "main" found in this objfile. The
+ name can be NULL, which means that the information was not
+ recorded. */
+
+ const char *name_of_main;
+ enum language language_of_main;
+
+ /* Each file contains a pointer to an array of minimal symbols for all
+ global symbols that are defined within the file. The array is
+ terminated by a "null symbol", one that has a NULL pointer for the
+ name and a zero value for the address. This makes it easy to walk
+ through the array when passed a pointer to somewhere in the middle
+ of it. There is also a count of the number of symbols, which does
+ not include the terminating null symbol. The array itself, as well
+ as all the data that it points to, should be allocated on the
+ objfile_obstack for this file. */
+
+ struct minimal_symbol *msymbols;
+ int minimal_symbol_count;
+
+ /* The number of minimal symbols read, before any minimal symbol
+ de-duplication is applied. Note in particular that this has only
+ a passing relationship with the actual size of the table above;
+ use minimal_symbol_count if you need the true size. */
+ int n_minsyms;
+
+ /* This is true if minimal symbols have already been read. Symbol
+ readers can use this to bypass minimal symbol reading. Also, the
+ minimal symbol table management code in minsyms.c uses this to
+ suppress new minimal symbols. You might think that MSYMBOLS or
+ MINIMAL_SYMBOL_COUNT could be used for this, but it is possible
+ for multiple readers to install minimal symbols into a given
+ per-BFD. */
+
+ unsigned int minsyms_read : 1;
+
+ /* This is a hash table used to index the minimal symbols by name. */
+
+ struct minimal_symbol *msymbol_hash[MINIMAL_SYMBOL_HASH_SIZE];
+
+ /* This hash table is used to index the minimal symbols by their
+ demangled names. */
+
+ struct minimal_symbol *msymbol_demangled_hash[MINIMAL_SYMBOL_HASH_SIZE];
+};
+
/* Master structure for keeping track of each file from which
gdb reads symbols. There are several ways these get allocated: 1.
The main symbol file, symfile_objfile, set by the symbol-file command,
{
/* All struct objfile's are chained together by their next pointers.
- The global variable "object_files" points to the first link in this
- chain.
+ The program space field "objfiles" (frequently referenced via
+ the macro "object_files") points to the first link in this
+ chain. */
- FIXME: There is a problem here if the objfile is reusable, and if
- multiple users are to be supported. The problem is that the objfile
- list is linked through a member of the objfile struct itself, which
- is only valid for one gdb process. The list implementation needs to
- be changed to something like:
+ struct objfile *next;
- struct list {struct list *next; struct objfile *objfile};
+ /* The object file's original name as specified by the user,
+ made absolute, and tilde-expanded. However, it is not canonicalized
+ (i.e., it has not been passed through gdb_realpath).
+ This pointer is never NULL. This does not have to be freed; it is
+ guaranteed to have a lifetime at least as long as the objfile. */
- where the list structure is completely maintained separately within
- each gdb process. */
+ char *original_name;
- struct objfile *next;
+ CORE_ADDR addr_low;
- /* The object file's name, tilde-expanded and absolute.
- Malloc'd; free it if you free this struct. */
+ /* Some flag bits for this objfile.
+ The values are defined by OBJF_*. */
- char *name;
+ unsigned short flags;
- /* Some flag bits for this objfile. */
+ /* The program space associated with this objfile. */
- unsigned short flags;
+ struct program_space *pspace;
/* Each objfile points to a linked list of symtabs derived from this file,
one symtab structure for each compilation unit (source file). Each link
- in the symtab list contains a backpointer to this objfile. */
+ in the symtab list contains a backpointer to this objfile. */
struct symtab *symtabs;
/* Each objfile points to a linked list of partial symtabs derived from
this file, one partial symtab structure for each compilation unit
- (source file). */
+ (source file). */
struct partial_symtab *psymtabs;
- /* List of freed partial symtabs, available for re-use */
+ /* Map addresses to the entries of PSYMTABS. It would be more efficient to
+ have a map per the whole process but ADDRMAP cannot selectively remove
+ its items during FREE_OBJFILE. This mapping is already present even for
+ PARTIAL_SYMTABs which still have no corresponding full SYMTABs read. */
+
+ struct addrmap *psymtabs_addrmap;
+
+ /* List of freed partial symtabs, available for re-use. */
struct partial_symtab *free_psymtabs;
bfd *obfd;
+ /* The per-BFD data. Note that this is treated specially if OBFD
+ is NULL. */
+
+ struct objfile_per_bfd_storage *per_bfd;
+
/* The modification timestamp of the object file, as of the last time
we read its symbols. */
long mtime;
- /* Obstacks to hold objects that should be freed when we load a new symbol
- table from this object file. */
+ /* Obstack to hold objects that should be freed when we load a new symbol
+ table from this object file. */
- struct obstack psymbol_obstack; /* Partial symbols */
- struct obstack symbol_obstack; /* Full symbols */
- struct obstack type_obstack; /* Types */
+ struct obstack objfile_obstack;
/* A byte cache where we can stash arbitrary "chunks" of bytes that
- will not change. */
-
- struct bcache *psymbol_cache; /* Byte cache for partial syms */
- struct bcache *macro_cache; /* Byte cache for macros */
+ will not change. */
- /* Hash table for mapping symbol names to demangled names. Each
- entry in the hash table is actually two consecutive strings,
- both null-terminated; the first one is a mangled or linkage
- name, and the second is the demangled name or just a zero byte
- if the name doesn't demangle. */
- struct htab *demangled_names_hash;
+ struct psymbol_bcache *psymbol_cache; /* Byte cache for partial syms. */
/* Vectors of all partial symbols read in from file. The actual data
- is stored in the psymbol_obstack. */
+ is stored in the objfile_obstack. */
struct psymbol_allocation_list global_psymbols;
struct psymbol_allocation_list static_psymbols;
- /* Each file contains a pointer to an array of minimal symbols for all
- global symbols that are defined within the file. The array is terminated
- by a "null symbol", one that has a NULL pointer for the name and a zero
- value for the address. This makes it easy to walk through the array
- when passed a pointer to somewhere in the middle of it. There is also
- a count of the number of symbols, which does not include the terminating
- null symbol. The array itself, as well as all the data that it points
- to, should be allocated on the symbol_obstack for this file. */
-
- struct minimal_symbol *msymbols;
- int minimal_symbol_count;
-
- /* This is a hash table used to index the minimal symbols by name. */
-
- struct minimal_symbol *msymbol_hash[MINIMAL_SYMBOL_HASH_SIZE];
-
- /* This hash table is used to index the minimal symbols by their
- demangled names. */
-
- struct minimal_symbol *msymbol_demangled_hash[MINIMAL_SYMBOL_HASH_SIZE];
-
- /* For object file formats which don't specify fundamental types, gdb
- can create such types. For now, it maintains a vector of pointers
- to these internally created fundamental types on a per objfile basis,
- however it really should ultimately keep them on a per-compilation-unit
- basis, to account for linkage-units that consist of a number of
- compilation units that may have different fundamental types, such as
- linking C modules with ADA modules, or linking C modules that are
- compiled with 32-bit ints with C modules that are compiled with 64-bit
- ints (not inherently evil with a smarter linker). */
-
- struct type **fundamental_types;
-
- /* The mmalloc() malloc-descriptor for this objfile if we are using
- the memory mapped malloc() package to manage storage for this objfile's
- data. NULL if we are not. */
-
- void *md;
-
- /* The file descriptor that was used to obtain the mmalloc descriptor
- for this objfile. If we call mmalloc_detach with the malloc descriptor
- we should then close this file descriptor. */
-
- int mmfd;
-
/* Structure which keeps track of functions that manipulate objfile's
- of the same type as this objfile. I.E. the function to read partial
+ of the same type as this objfile. I.e. the function to read partial
symbols for example. Note that this structure is in statically
allocated memory, and is shared by all objfiles that use the
- object module reader of this type. */
-
- struct sym_fns *sf;
-
- /* The per-objfile information about the entry point, the scope (file/func)
- containing the entry point, and the scope of the user's main() func. */
-
- struct entry_info ei;
-
- /* Information about stabs. Will be filled in with a dbx_symfile_info
- struct by those readers that need it. */
-
- struct dbx_symfile_info *sym_stab_info;
-
- /* Hook for information for use by the symbol reader (currently used
- for information shared by sym_init and sym_read). It is
- typically a pointer to malloc'd memory. The symbol reader's finish
- function is responsible for freeing the memory thusly allocated. */
-
- void *sym_private;
-
- /* Hook for target-architecture-specific information. This must
- point to memory allocated on one of the obstacks in this objfile,
- so that it gets freed automatically when reading a new object
- file. */
+ object module reader of this type. */
- void *obj_private;
+ const struct sym_fns *sf;
/* Per objfile data-pointers required by other GDB modules. */
- /* FIXME: kettenis/20030711: This mechanism could replace
- sym_stab_info, sym_private and obj_private entirely. */
- void **data;
- unsigned num_data;
+ REGISTRY_FIELDS;
/* Set of relocation offsets to apply to each section.
- Currently on the psymbol_obstack (which makes no sense, but I'm
- not sure it's harming anything).
+ The table is indexed by the_bfd_section->index, thus it is generally
+ as large as the number of sections in the binary.
+ The table is stored on the objfile_obstack.
These offsets indicate that all symbols (including partial and
minimal symbols) which have been read have been relocated by this
- much. Symbols which are yet to be read need to be relocated by
- it. */
+ much. Symbols which are yet to be read need to be relocated by it. */
struct section_offsets *section_offsets;
int num_sections;
- /* Indexes in the section_offsets array. These are initialized by the
+ /* Indexes in the section_offsets array. These are initialized by the
*_symfile_offsets() family of functions (som_symfile_offsets,
- xcoff_symfile_offsets, default_symfile_offsets). In theory they
+ xcoff_symfile_offsets, default_symfile_offsets). In theory they
should correspond to the section indexes used by bfd for the
- current objfile. The exception to this for the time being is the
- SOM version. */
+ current objfile. The exception to this for the time being is the
+ SOM version. */
int sect_index_text;
int sect_index_data;
among other things, is used to map pc addresses into sections.
SECTIONS points to the first entry in the table, and
SECTIONS_END points to the first location past the last entry
- in the table. Currently the table is stored on the
- psymbol_obstack (which makes no sense, but I'm not sure it's
- harming anything). */
-
- struct obj_section
- *sections, *sections_end;
-
- /* two auxiliary fields, used to hold the fp of separate symbol files */
- FILE *auxf1, *auxf2;
-
- /* Imported symbols */
- ImportEntry *import_list;
- int import_list_size;
-
- /* Exported symbols */
- ExportEntry *export_list;
- int export_list_size;
-
- /* Link to objfile that contains the debug symbols for this one.
- One is loaded if this file has an debug link to an existing
- debug file with the right checksum */
+ in the table. The table is stored on the objfile_obstack. The
+ sections are indexed by the BFD section index; but the
+ structure data is only valid for certain sections
+ (e.g. non-empty, SEC_ALLOC). */
+
+ struct obj_section *sections, *sections_end;
+
+ /* GDB allows to have debug symbols in separate object files. This is
+ used by .gnu_debuglink, ELF build id note and Mach-O OSO.
+ Although this is a tree structure, GDB only support one level
+ (ie a separate debug for a separate debug is not supported). Note that
+ separate debug object are in the main chain and therefore will be
+ visited by ALL_OBJFILES & co iterators. Separate debug objfile always
+ has a non-nul separate_debug_objfile_backlink. */
+
+ /* Link to the first separate debug object, if any. */
struct objfile *separate_debug_objfile;
/* If this is a separate debug object, this is used as a link to the
- actual executable objfile. */
+ actual executable objfile. */
struct objfile *separate_debug_objfile_backlink;
-
- /* Place to stash various statistics about this objfile */
- OBJSTATS;
-
- /* A symtab that the C++ code uses to stash special symbols
- associated to namespaces. */
- /* FIXME/carlton-2003-06-27: Delete this in a few years once
- "possible namespace symbols" go away. */
- struct symtab *cp_namespace_symtab;
- };
+ /* If this is a separate debug object, this is a link to the next one
+ for the same executable objfile. */
+ struct objfile *separate_debug_objfile_link;
-/* Defines for the objfile flag word. */
+ /* Place to stash various statistics about this objfile. */
+ OBJSTATS;
-/* When using mapped/remapped predigested gdb symbol information, we need
- a flag that indicates that we have previously done an initial symbol
- table read from this particular objfile. We can't just look for the
- absence of any of the three symbol tables (msymbols, psymtab, symtab)
- because if the file has no symbols for example, none of these will
- exist. */
+ /* A linked list of symbols created when reading template types or
+ function templates. These symbols are not stored in any symbol
+ table, so we have to keep them here to relocate them
+ properly. */
+ struct symbol *template_symbols;
+ };
-#define OBJF_SYMS (1 << 1) /* Have tried to read symbols */
+/* Defines for the objfile flag word. */
/* When an object file has its functions reordered (currently Irix-5.2
shared libraries exhibit this behaviour), we will need an expensive
To avoid this penalty for normal object files, we use this flag,
whose setting is determined upon symbol table read in. */
-#define OBJF_REORDERED (1 << 2) /* Functions are reordered */
+#define OBJF_REORDERED (1 << 0) /* Functions are reordered */
/* Distinguish between an objfile for a shared library and a "vanilla"
- objfile. (If not set, the objfile may still actually be a solib.
- This can happen if the user created the objfile by using the
- add-symbol-file command. GDB doesn't in that situation actually
- check whether the file is a solib. Rather, the target's
- implementation of the solib interface is responsible for setting
- this flag when noticing solibs used by an inferior.) */
+ objfile. This may come from a target's implementation of the solib
+ interface, from add-symbol-file, or any other mechanism that loads
+ dynamic objects. */
-#define OBJF_SHARED (1 << 3) /* From a shared library */
+#define OBJF_SHARED (1 << 1) /* From a shared library */
-/* User requested that this objfile be read in it's entirety. */
+/* User requested that this objfile be read in it's entirety. */
-#define OBJF_READNOW (1 << 4) /* Immediate full read */
+#define OBJF_READNOW (1 << 2) /* Immediate full read */
/* This objfile was created because the user explicitly caused it
(e.g., used the add-symbol-file command). This bit offers a way
for run_command to remove old objfile entries which are no longer
valid (i.e., are associated with an old inferior), but to preserve
ones that the user explicitly loaded via the add-symbol-file
- command. */
+ command. */
-#define OBJF_USERLOADED (1 << 5) /* User loaded */
+#define OBJF_USERLOADED (1 << 3) /* User loaded */
-/* The object file that the main symbol table was loaded from (e.g. the
- argument to the "symbol-file" or "file" command). */
+/* Set if we have tried to read partial symtabs for this objfile.
+ This is used to allow lazy reading of partial symtabs. */
-extern struct objfile *symfile_objfile;
+#define OBJF_PSYMTABS_READ (1 << 4)
-/* The object file that contains the runtime common minimal symbols
- for SunOS4. Note that this objfile has no associated BFD. */
+/* Set if this is the main symbol file
+ (as opposed to symbol file for dynamically loaded code). */
-extern struct objfile *rt_common_objfile;
+#define OBJF_MAINLINE (1 << 5)
-/* When we need to allocate a new type, we need to know which type_obstack
- to allocate the type on, since there is one for each objfile. The places
- where types are allocated are deeply buried in function call hierarchies
- which know nothing about objfiles, so rather than trying to pass a
- particular objfile down to them, we just do an end run around them and
- set current_objfile to be whatever objfile we expect to be using at the
- time types are being allocated. For instance, when we start reading
- symbols for a particular objfile, we set current_objfile to point to that
- objfile, and when we are done, we set it back to NULL, to ensure that we
- never put a type someplace other than where we are expecting to put it.
- FIXME: Maybe we should review the entire type handling system and
- see if there is a better way to avoid this problem. */
+/* ORIGINAL_NAME and OBFD->FILENAME correspond to text description unrelated to
+ filesystem names. It can be for example "<image in memory>". */
-extern struct objfile *current_objfile;
+#define OBJF_NOT_FILENAME (1 << 6)
-/* All known objfiles are kept in a linked list. This points to the
- root of this list. */
+/* Declarations for functions defined in objfiles.c */
-extern struct objfile *object_files;
+extern struct objfile *allocate_objfile (bfd *, const char *name, int);
-/* Declarations for functions defined in objfiles.c */
+extern struct gdbarch *get_objfile_arch (struct objfile *);
-extern struct objfile *allocate_objfile (bfd *, int);
+extern int entry_point_address_query (CORE_ADDR *entry_p);
-extern int build_objfile_section_table (struct objfile *);
+extern CORE_ADDR entry_point_address (void);
+
+extern void build_objfile_section_table (struct objfile *);
extern void terminate_minimal_symbol_table (struct objfile *objfile);
+extern struct objfile *objfile_separate_debug_iterate (const struct objfile *,
+ const struct objfile *);
+
extern void put_objfile_before (struct objfile *, struct objfile *);
-extern void objfile_to_front (struct objfile *);
+extern void add_separate_debug_objfile (struct objfile *, struct objfile *);
extern void unlink_objfile (struct objfile *);
extern void free_objfile (struct objfile *);
+extern void free_objfile_separate_debug (struct objfile *);
+
extern struct cleanup *make_cleanup_free_objfile (struct objfile *);
extern void free_all_objfiles (void);
-extern void objfile_relocate (struct objfile *, struct section_offsets *);
+extern void objfile_relocate (struct objfile *, const struct section_offsets *);
+extern void objfile_rebase (struct objfile *, CORE_ADDR);
+
+extern int objfile_has_partial_symbols (struct objfile *objfile);
+
+extern int objfile_has_full_symbols (struct objfile *objfile);
+
+extern int objfile_has_symbols (struct objfile *objfile);
extern int have_partial_symbols (void);
extern int have_full_symbols (void);
+extern void objfile_set_sym_fns (struct objfile *objfile,
+ const struct sym_fns *sf);
+
+extern void objfiles_changed (void);
+
+extern int is_addr_in_objfile (CORE_ADDR addr, const struct objfile *objfile);
+
+/* Return true if ADDRESS maps into one of the sections of a
+ OBJF_SHARED objfile of PSPACE and false otherwise. */
+
+extern int shared_objfile_contains_address_p (struct program_space *pspace,
+ CORE_ADDR address);
+
/* This operation deletes all objfile entries that represent solibs that
weren't explicitly loaded by the user, via e.g., the add-symbol-file
- command.
- */
+ command. */
+
extern void objfile_purge_solibs (void);
/* Functions for dealing with the minimal symbol table, really a misc
extern struct obj_section *find_pc_section (CORE_ADDR pc);
-extern struct obj_section *find_pc_sect_section (CORE_ADDR pc,
- asection * section);
+/* Return non-zero if PC is in a section called NAME. */
+extern int pc_in_section (CORE_ADDR, char *);
-extern int in_plt_section (CORE_ADDR, char *);
+/* Return non-zero if PC is in a SVR4-style procedure linkage table
+ section. */
-extern int is_in_import_list (char *, struct objfile *);
+static inline int
+in_plt_section (CORE_ADDR pc)
+{
+ return pc_in_section (pc, ".plt");
+}
/* Keep a registry of per-objfile data-pointers required by other GDB
modules. */
-
-extern const struct objfile_data *register_objfile_data (void);
-extern void clear_objfile_data (struct objfile *objfile);
-extern void set_objfile_data (struct objfile *objfile,
- const struct objfile_data *data, void *value);
-extern void *objfile_data (struct objfile *objfile,
- const struct objfile_data *data);
+DECLARE_REGISTRY(objfile);
+
+/* In normal use, the section map will be rebuilt by find_pc_section
+ if objfiles have been added, removed or relocated since it was last
+ called. Calling inhibit_section_map_updates will inhibit this
+ behavior until resume_section_map_updates is called. If you call
+ inhibit_section_map_updates you must ensure that every call to
+ find_pc_section in the inhibited region relates to a section that
+ is already in the section map and has not since been removed or
+ relocated. */
+extern void inhibit_section_map_updates (struct program_space *pspace);
+
+/* Resume automatically rebuilding the section map as required. */
+extern void resume_section_map_updates (struct program_space *pspace);
+
+/* Version of the above suitable for use as a cleanup. */
+extern void resume_section_map_updates_cleanup (void *arg);
+
+extern void default_iterate_over_objfiles_in_search_order
+ (struct gdbarch *gdbarch,
+ iterate_over_objfiles_in_search_order_cb_ftype *cb,
+ void *cb_data, struct objfile *current_objfile);
\f
-/* Traverse all object files. ALL_OBJFILES_SAFE works even if you delete
- the objfile during the traversal. */
+/* Traverse all object files in the current program space.
+ ALL_OBJFILES_SAFE works even if you delete the objfile during the
+ traversal. */
+
+/* Traverse all object files in program space SS. */
-#define ALL_OBJFILES(obj) \
- for ((obj) = object_files; (obj) != NULL; (obj) = (obj)->next)
+#define ALL_PSPACE_OBJFILES(ss, obj) \
+ for ((obj) = ss->objfiles; (obj) != NULL; (obj) = (obj)->next)
-#define ALL_OBJFILES_SAFE(obj,nxt) \
- for ((obj) = object_files; \
+#define ALL_PSPACE_OBJFILES_SAFE(ss, obj, nxt) \
+ for ((obj) = ss->objfiles; \
+ (obj) != NULL? ((nxt)=(obj)->next,1) :0; \
+ (obj) = (nxt))
+
+#define ALL_OBJFILES(obj) \
+ for ((obj) = current_program_space->objfiles; \
+ (obj) != NULL; \
+ (obj) = (obj)->next)
+
+#define ALL_OBJFILES_SAFE(obj,nxt) \
+ for ((obj) = current_program_space->objfiles; \
(obj) != NULL? ((nxt)=(obj)->next,1) :0; \
(obj) = (nxt))
#define ALL_OBJFILE_SYMTABS(objfile, s) \
for ((s) = (objfile) -> symtabs; (s) != NULL; (s) = (s) -> next)
-/* Traverse all psymtabs in one objfile. */
+/* Traverse all primary symtabs in one objfile. */
-#define ALL_OBJFILE_PSYMTABS(objfile, p) \
- for ((p) = (objfile) -> psymtabs; (p) != NULL; (p) = (p) -> next)
+#define ALL_OBJFILE_PRIMARY_SYMTABS(objfile, s) \
+ ALL_OBJFILE_SYMTABS ((objfile), (s)) \
+ if ((s)->primary)
/* Traverse all minimal symbols in one objfile. */
-#define ALL_OBJFILE_MSYMBOLS(objfile, m) \
- for ((m) = (objfile) -> msymbols; DEPRECATED_SYMBOL_NAME(m) != NULL; (m)++)
+#define ALL_OBJFILE_MSYMBOLS(objfile, m) \
+ for ((m) = (objfile)->per_bfd->msymbols; \
+ MSYMBOL_LINKAGE_NAME (m) != NULL; \
+ (m)++)
-/* Traverse all symtabs in all objfiles. */
+/* Traverse all symtabs in all objfiles in the current symbol
+ space. */
#define ALL_SYMTABS(objfile, s) \
ALL_OBJFILES (objfile) \
ALL_OBJFILE_SYMTABS (objfile, s)
-/* Traverse all psymtabs in all objfiles. */
+#define ALL_PSPACE_SYMTABS(ss, objfile, s) \
+ ALL_PSPACE_OBJFILES (ss, objfile) \
+ ALL_OBJFILE_SYMTABS (objfile, s)
+
+/* Traverse all symtabs in all objfiles in the current program space,
+ skipping included files (which share a blockvector with their
+ primary symtab). */
-#define ALL_PSYMTABS(objfile, p) \
- ALL_OBJFILES (objfile) \
- ALL_OBJFILE_PSYMTABS (objfile, p)
+#define ALL_PRIMARY_SYMTABS(objfile, s) \
+ ALL_OBJFILES (objfile) \
+ ALL_OBJFILE_PRIMARY_SYMTABS (objfile, s)
-/* Traverse all minimal symbols in all objfiles. */
+#define ALL_PSPACE_PRIMARY_SYMTABS(pspace, objfile, s) \
+ ALL_PSPACE_OBJFILES (ss, objfile) \
+ ALL_OBJFILE_PRIMARY_SYMTABS (objfile, s)
+
+/* Traverse all minimal symbols in all objfiles in the current symbol
+ space. */
#define ALL_MSYMBOLS(objfile, m) \
ALL_OBJFILES (objfile) \
ALL_OBJFILE_MSYMBOLS (objfile, m)
#define ALL_OBJFILE_OSECTIONS(objfile, osect) \
- for (osect = objfile->sections; osect < objfile->sections_end; osect++)
-
-#define ALL_OBJSECTIONS(objfile, osect) \
- ALL_OBJFILES (objfile) \
+ for (osect = objfile->sections; osect < objfile->sections_end; osect++) \
+ if (osect->the_bfd_section == NULL) \
+ { \
+ /* Nothing. */ \
+ } \
+ else
+
+/* Traverse all obj_sections in all objfiles in the current program
+ space.
+
+ Note that this detects a "break" in the inner loop, and exits
+ immediately from the outer loop as well, thus, client code doesn't
+ need to know that this is implemented with a double for. The extra
+ hair is to make sure that a "break;" stops the outer loop iterating
+ as well, and both OBJFILE and OSECT are left unmodified:
+
+ - The outer loop learns about the inner loop's end condition, and
+ stops iterating if it detects the inner loop didn't reach its
+ end. In other words, the outer loop keeps going only if the
+ inner loop reached its end cleanly [(osect) ==
+ (objfile)->sections_end].
+
+ - OSECT is initialized in the outer loop initialization
+ expressions, such as if the inner loop has reached its end, so
+ the check mentioned above succeeds the first time.
+
+ - The trick to not clearing OBJFILE on a "break;" is, in the outer
+ loop's loop expression, advance OBJFILE, but iff the inner loop
+ reached its end. If not, there was a "break;", so leave OBJFILE
+ as is; the outer loop's conditional will break immediately as
+ well (as OSECT will be different from OBJFILE->sections_end). */
+
+#define ALL_OBJSECTIONS(objfile, osect) \
+ for ((objfile) = current_program_space->objfiles, \
+ (objfile) != NULL ? ((osect) = (objfile)->sections_end) : 0; \
+ (objfile) != NULL \
+ && (osect) == (objfile)->sections_end; \
+ ((osect) == (objfile)->sections_end \
+ ? ((objfile) = (objfile)->next, \
+ (objfile) != NULL ? (osect) = (objfile)->sections_end : 0) \
+ : 0)) \
ALL_OBJFILE_OSECTIONS (objfile, osect)
#define SECT_OFF_DATA(objfile) \
((objfile->sect_index_data == -1) \
- ? (internal_error (__FILE__, __LINE__, "sect_index_data not initialized"), -1) \
+ ? (internal_error (__FILE__, __LINE__, \
+ _("sect_index_data not initialized")), -1) \
: objfile->sect_index_data)
#define SECT_OFF_RODATA(objfile) \
((objfile->sect_index_rodata == -1) \
- ? (internal_error (__FILE__, __LINE__, "sect_index_rodata not initialized"), -1) \
+ ? (internal_error (__FILE__, __LINE__, \
+ _("sect_index_rodata not initialized")), -1) \
: objfile->sect_index_rodata)
#define SECT_OFF_TEXT(objfile) \
((objfile->sect_index_text == -1) \
- ? (internal_error (__FILE__, __LINE__, "sect_index_text not initialized"), -1) \
+ ? (internal_error (__FILE__, __LINE__, \
+ _("sect_index_text not initialized")), -1) \
: objfile->sect_index_text)
/* Sometimes the .bss section is missing from the objfile, so we don't
- want to die here. Let the users of SECT_OFF_BSS deal with an
- uninitialized section index. */
+ want to die here. Let the users of SECT_OFF_BSS deal with an
+ uninitialized section index. */
#define SECT_OFF_BSS(objfile) (objfile)->sect_index_bss
+/* Answer whether there is more than one object file loaded. */
+
+#define MULTI_OBJFILE_P() (object_files && object_files->next)
+
+/* Reset the per-BFD storage area on OBJ. */
+
+void set_objfile_per_bfd (struct objfile *obj);
+
+const char *objfile_name (const struct objfile *objfile);
+
+/* Set the objfile's notion of the "main" name and language. */
+
+extern void set_objfile_main_name (struct objfile *objfile,
+ const char *name, enum language lang);
+
#endif /* !defined (OBJFILES_H) */
projects / platform / upstream / binutils.git / blobdiff