/* Target-struct-independent code to start (run) and stop an inferior
process.
- Copyright (C) 1986-2013 Free Software Foundation, Inc.
+ Copyright (C) 1986-2014 Free Software Foundation, Inc.
This file is part of GDB.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#include "gdb_string.h"
+#include "infrun.h"
#include <ctype.h>
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
-#include "exceptions.h"
#include "breakpoint.h"
#include "gdb_wait.h"
#include "gdbcore.h"
#include "main.h"
#include "dictionary.h"
#include "block.h"
-#include "gdb_assert.h"
#include "mi/mi-common.h"
#include "event-top.h"
#include "record.h"
#include "objfiles.h"
#include "completer.h"
#include "target-descriptions.h"
+#include "target-dcache.h"
+#include "terminal.h"
/* Prototypes for local functions */
static int follow_fork (void);
+static int follow_fork_inferior (int follow_child, int detach_fork);
+
+static void follow_inferior_reset_breakpoints (void);
+
static void set_schedlock_func (char *args, int from_tty,
struct cmd_list_element *c);
static int currently_stepping (struct thread_info *tp);
-static int currently_stepping_or_nexting_callback (struct thread_info *tp,
- void *data);
-
static void xdb_handle_command (char *args, int from_tty);
-static int prepare_to_proceed (int);
-
-static void print_exited_reason (int exitstatus);
-
-static void print_signal_exited_reason (enum gdb_signal siggnal);
-
-static void print_no_history_reason (void);
-
-static void print_signal_received_reason (enum gdb_signal siggnal);
-
-static void print_end_stepping_range_reason (void);
-
void _initialize_infrun (void);
void nullify_last_target_wait_ptid (void);
int sync_execution = 0;
-/* wait_for_inferior and normal_stop use this to notify the user
- when the inferior stopped in a different thread than it had been
- running in. */
+/* proceed and normal_stop use this to notify the user when the
+ inferior stopped in a different thread than it had been running
+ in. */
static ptid_t previous_inferior_ptid;
going out we leave it that way. */
if (observer_mode)
{
- target_async_permitted = 1;
pagination_enabled = 0;
non_stop = non_stop_1 = 1;
}
}
\f
+/* Handle changes to the inferior list based on the type of fork,
+ which process is being followed, and whether the other process
+ should be detached. On entry inferior_ptid must be the ptid of
+ the fork parent. At return inferior_ptid is the ptid of the
+ followed inferior. */
+
+static int
+follow_fork_inferior (int follow_child, int detach_fork)
+{
+ int has_vforked;
+ int parent_pid, child_pid;
+
+ has_vforked = (inferior_thread ()->pending_follow.kind
+ == TARGET_WAITKIND_VFORKED);
+ parent_pid = ptid_get_lwp (inferior_ptid);
+ if (parent_pid == 0)
+ parent_pid = ptid_get_pid (inferior_ptid);
+ child_pid
+ = ptid_get_pid (inferior_thread ()->pending_follow.value.related_pid);
+
+ if (has_vforked
+ && !non_stop /* Non-stop always resumes both branches. */
+ && (!target_is_async_p () || sync_execution)
+ && !(follow_child || detach_fork || sched_multi))
+ {
+ /* The parent stays blocked inside the vfork syscall until the
+ child execs or exits. If we don't let the child run, then
+ the parent stays blocked. If we're telling the parent to run
+ in the foreground, the user will not be able to ctrl-c to get
+ back the terminal, effectively hanging the debug session. */
+ fprintf_filtered (gdb_stderr, _("\
+Can not resume the parent process over vfork in the foreground while\n\
+holding the child stopped. Try \"set detach-on-fork\" or \
+\"set schedule-multiple\".\n"));
+ /* FIXME output string > 80 columns. */
+ return 1;
+ }
+
+ if (!follow_child)
+ {
+ /* Detach new forked process? */
+ if (detach_fork)
+ {
+ struct cleanup *old_chain;
+
+ /* Before detaching from the child, remove all breakpoints
+ from it. If we forked, then this has already been taken
+ care of by infrun.c. If we vforked however, any
+ breakpoint inserted in the parent is visible in the
+ child, even those added while stopped in a vfork
+ catchpoint. This will remove the breakpoints from the
+ parent also, but they'll be reinserted below. */
+ if (has_vforked)
+ {
+ /* Keep breakpoints list in sync. */
+ remove_breakpoints_pid (ptid_get_pid (inferior_ptid));
+ }
+
+ if (info_verbose || debug_infrun)
+ {
+ target_terminal_ours ();
+ fprintf_filtered (gdb_stdlog,
+ "Detaching after fork from "
+ "child process %d.\n",
+ child_pid);
+ }
+ }
+ else
+ {
+ struct inferior *parent_inf, *child_inf;
+ struct cleanup *old_chain;
+
+ /* Add process to GDB's tables. */
+ child_inf = add_inferior (child_pid);
+
+ parent_inf = current_inferior ();
+ child_inf->attach_flag = parent_inf->attach_flag;
+ copy_terminal_info (child_inf, parent_inf);
+ child_inf->gdbarch = parent_inf->gdbarch;
+ copy_inferior_target_desc_info (child_inf, parent_inf);
+
+ old_chain = save_inferior_ptid ();
+ save_current_program_space ();
+
+ inferior_ptid = ptid_build (child_pid, child_pid, 0);
+ add_thread (inferior_ptid);
+ child_inf->symfile_flags = SYMFILE_NO_READ;
+
+ /* If this is a vfork child, then the address-space is
+ shared with the parent. */
+ if (has_vforked)
+ {
+ child_inf->pspace = parent_inf->pspace;
+ child_inf->aspace = parent_inf->aspace;
+
+ /* The parent will be frozen until the child is done
+ with the shared region. Keep track of the
+ parent. */
+ child_inf->vfork_parent = parent_inf;
+ child_inf->pending_detach = 0;
+ parent_inf->vfork_child = child_inf;
+ parent_inf->pending_detach = 0;
+ }
+ else
+ {
+ child_inf->aspace = new_address_space ();
+ child_inf->pspace = add_program_space (child_inf->aspace);
+ child_inf->removable = 1;
+ set_current_program_space (child_inf->pspace);
+ clone_program_space (child_inf->pspace, parent_inf->pspace);
+
+ /* Let the shared library layer (e.g., solib-svr4) learn
+ about this new process, relocate the cloned exec, pull
+ in shared libraries, and install the solib event
+ breakpoint. If a "cloned-VM" event was propagated
+ better throughout the core, this wouldn't be
+ required. */
+ solib_create_inferior_hook (0);
+ }
+
+ do_cleanups (old_chain);
+ }
+
+ if (has_vforked)
+ {
+ struct inferior *parent_inf;
+
+ parent_inf = current_inferior ();
+
+ /* If we detached from the child, then we have to be careful
+ to not insert breakpoints in the parent until the child
+ is done with the shared memory region. However, if we're
+ staying attached to the child, then we can and should
+ insert breakpoints, so that we can debug it. A
+ subsequent child exec or exit is enough to know when does
+ the child stops using the parent's address space. */
+ parent_inf->waiting_for_vfork_done = detach_fork;
+ parent_inf->pspace->breakpoints_not_allowed = detach_fork;
+ }
+ }
+ else
+ {
+ /* Follow the child. */
+ struct inferior *parent_inf, *child_inf;
+ struct program_space *parent_pspace;
+
+ if (info_verbose || debug_infrun)
+ {
+ target_terminal_ours ();
+ if (has_vforked)
+ fprintf_filtered (gdb_stdlog,
+ _("Attaching after process %d "
+ "vfork to child process %d.\n"),
+ parent_pid, child_pid);
+ else
+ fprintf_filtered (gdb_stdlog,
+ _("Attaching after process %d "
+ "fork to child process %d.\n"),
+ parent_pid, child_pid);
+ }
+
+ /* Add the new inferior first, so that the target_detach below
+ doesn't unpush the target. */
+
+ child_inf = add_inferior (child_pid);
+
+ parent_inf = current_inferior ();
+ child_inf->attach_flag = parent_inf->attach_flag;
+ copy_terminal_info (child_inf, parent_inf);
+ child_inf->gdbarch = parent_inf->gdbarch;
+ copy_inferior_target_desc_info (child_inf, parent_inf);
+
+ parent_pspace = parent_inf->pspace;
+
+ /* If we're vforking, we want to hold on to the parent until the
+ child exits or execs. At child exec or exit time we can
+ remove the old breakpoints from the parent and detach or
+ resume debugging it. Otherwise, detach the parent now; we'll
+ want to reuse it's program/address spaces, but we can't set
+ them to the child before removing breakpoints from the
+ parent, otherwise, the breakpoints module could decide to
+ remove breakpoints from the wrong process (since they'd be
+ assigned to the same address space). */
+
+ if (has_vforked)
+ {
+ gdb_assert (child_inf->vfork_parent == NULL);
+ gdb_assert (parent_inf->vfork_child == NULL);
+ child_inf->vfork_parent = parent_inf;
+ child_inf->pending_detach = 0;
+ parent_inf->vfork_child = child_inf;
+ parent_inf->pending_detach = detach_fork;
+ parent_inf->waiting_for_vfork_done = 0;
+ }
+ else if (detach_fork)
+ target_detach (NULL, 0);
+
+ /* Note that the detach above makes PARENT_INF dangling. */
+
+ /* Add the child thread to the appropriate lists, and switch to
+ this new thread, before cloning the program space, and
+ informing the solib layer about this new process. */
+
+ inferior_ptid = ptid_build (child_pid, child_pid, 0);
+ add_thread (inferior_ptid);
+
+ /* If this is a vfork child, then the address-space is shared
+ with the parent. If we detached from the parent, then we can
+ reuse the parent's program/address spaces. */
+ if (has_vforked || detach_fork)
+ {
+ child_inf->pspace = parent_pspace;
+ child_inf->aspace = child_inf->pspace->aspace;
+ }
+ else
+ {
+ child_inf->aspace = new_address_space ();
+ child_inf->pspace = add_program_space (child_inf->aspace);
+ child_inf->removable = 1;
+ child_inf->symfile_flags = SYMFILE_NO_READ;
+ set_current_program_space (child_inf->pspace);
+ clone_program_space (child_inf->pspace, parent_pspace);
+
+ /* Let the shared library layer (e.g., solib-svr4) learn
+ about this new process, relocate the cloned exec, pull in
+ shared libraries, and install the solib event breakpoint.
+ If a "cloned-VM" event was propagated better throughout
+ the core, this wouldn't be required. */
+ solib_create_inferior_hook (0);
+ }
+ }
+
+ return target_follow_fork (follow_child, detach_fork);
+}
+
/* Tell the target to follow the fork we're stopped at. Returns true
if the inferior should be resumed; false, if the target for some
reason decided it's best not to resume. */
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
+ struct interp *command_interp = NULL;
if (!non_stop)
{
step_frame_id = tp->control.step_frame_id;
exception_resume_breakpoint
= clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
+ command_interp = tp->control.command_interp;
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
tp->control.step_range_end = 0;
tp->control.step_frame_id = null_frame_id;
delete_exception_resume_breakpoint (tp);
+ tp->control.command_interp = NULL;
}
parent = inferior_ptid;
child = tp->pending_follow.value.related_pid;
- /* Tell the target to do whatever is necessary to follow
- either parent or child. */
- if (target_follow_fork (follow_child, detach_fork))
+ /* Set up inferior(s) as specified by the caller, and tell the
+ target to do whatever is necessary to follow either parent
+ or child. */
+ if (follow_fork_inferior (follow_child, detach_fork))
{
/* Target refused to follow, or there's some other reason
we shouldn't resume. */
tp->control.step_frame_id = step_frame_id;
tp->control.exception_resume_breakpoint
= exception_resume_breakpoint;
+ tp->control.command_interp = command_interp;
}
else
{
return should_resume;
}
-void
+static void
follow_inferior_reset_breakpoints (void)
{
struct thread_info *tp = inferior_thread ();
/* Was there a step_resume breakpoint? (There was if the user
did a "next" at the fork() call.) If so, explicitly reset its
- thread number.
+ thread number. Cloned step_resume breakpoints are disabled on
+ creation, so enable it here now that it is associated with the
+ correct thread.
step_resumes are a form of bp that are made to be per-thread.
Since we created the step_resume bp when the parent process
it is for, or it'll be ignored when it triggers. */
if (tp->control.step_resume_breakpoint)
- breakpoint_re_set_thread (tp->control.step_resume_breakpoint);
+ {
+ breakpoint_re_set_thread (tp->control.step_resume_breakpoint);
+ tp->control.step_resume_breakpoint->loc->enabled = 1;
+ }
+ /* Treat exception_resume breakpoints like step_resume breakpoints. */
if (tp->control.exception_resume_breakpoint)
- breakpoint_re_set_thread (tp->control.exception_resume_breakpoint);
+ {
+ breakpoint_re_set_thread (tp->control.exception_resume_breakpoint);
+ tp->control.exception_resume_breakpoint->loc->enabled = 1;
+ }
/* Reinsert all breakpoints in the child. The user may have set
breakpoints after catching the fork, in which case those
target_pid_to_str (thread->ptid));
switch_to_thread (thread->ptid);
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
}
/* PC when we started this single-step. */
static CORE_ADDR singlestep_pc;
-/* If another thread hit the singlestep breakpoint, we save the original
- thread here so that we can resume single-stepping it later. */
-static ptid_t saved_singlestep_ptid;
-static int stepping_past_singlestep_breakpoint;
+/* Info about an instruction that is being stepped over. Invalid if
+ ASPACE is NULL. */
+
+struct step_over_info
+{
+ /* The instruction's address space. */
+ struct address_space *aspace;
+
+ /* The instruction's address. */
+ CORE_ADDR address;
+};
+
+/* The step-over info of the location that is being stepped over.
+
+ Note that with async/breakpoint always-inserted mode, a user might
+ set a new breakpoint/watchpoint/etc. exactly while a breakpoint is
+ being stepped over. As setting a new breakpoint inserts all
+ breakpoints, we need to make sure the breakpoint being stepped over
+ isn't inserted then. We do that by only clearing the step-over
+ info when the step-over is actually finished (or aborted).
+
+ Presently GDB can only step over one breakpoint at any given time.
+ Given threads that can't run code in the same address space as the
+ breakpoint's can't really miss the breakpoint, GDB could be taught
+ to step-over at most one breakpoint per address space (so this info
+ could move to the address space object if/when GDB is extended).
+ The set of breakpoints being stepped over will normally be much
+ smaller than the set of all breakpoints, so a flag in the
+ breakpoint location structure would be wasteful. A separate list
+ also saves complexity and run-time, as otherwise we'd have to go
+ through all breakpoint locations clearing their flag whenever we
+ start a new sequence. Similar considerations weigh against storing
+ this info in the thread object. Plus, not all step overs actually
+ have breakpoint locations -- e.g., stepping past a single-step
+ breakpoint, or stepping to complete a non-continuable
+ watchpoint. */
+static struct step_over_info step_over_info;
+
+/* Record the address of the breakpoint/instruction we're currently
+ stepping over. */
+
+static void
+set_step_over_info (struct address_space *aspace, CORE_ADDR address)
+{
+ step_over_info.aspace = aspace;
+ step_over_info.address = address;
+}
+
+/* Called when we're not longer stepping over a breakpoint / an
+ instruction, so all breakpoints are free to be (re)inserted. */
+
+static void
+clear_step_over_info (void)
+{
+ step_over_info.aspace = NULL;
+ step_over_info.address = 0;
+}
+
+/* See infrun.h. */
-/* If not equal to null_ptid, this means that after stepping over breakpoint
- is finished, we need to switch to deferred_step_ptid, and step it.
+int
+stepping_past_instruction_at (struct address_space *aspace,
+ CORE_ADDR address)
+{
+ return (step_over_info.aspace != NULL
+ && breakpoint_address_match (aspace, address,
+ step_over_info.aspace,
+ step_over_info.address));
+}
- The use case is when one thread has hit a breakpoint, and then the user
- has switched to another thread and issued 'step'. We need to step over
- breakpoint in the thread which hit the breakpoint, but then continue
- stepping the thread user has selected. */
-static ptid_t deferred_step_ptid;
\f
/* Displaced stepping. */
return (((can_use_displaced_stepping == AUTO_BOOLEAN_AUTO && non_stop)
|| can_use_displaced_stepping == AUTO_BOOLEAN_TRUE)
&& gdbarch_displaced_step_copy_insn_p (gdbarch)
- && !RECORD_IS_USED);
+ && find_record_target () == NULL);
}
/* Clean out any stray displaced stepping state. */
if (ptid_equal (singlestep_ptid, old_ptid))
singlestep_ptid = new_ptid;
- if (ptid_equal (deferred_step_ptid, old_ptid))
- deferred_step_ptid = new_ptid;
-
for (displaced = displaced_step_inferior_states;
displaced;
displaced = displaced->next)
return hw_step;
}
-/* Return a ptid representing the set of threads that we will proceed,
- in the perspective of the user/frontend. We may actually resume
- fewer threads at first, e.g., if a thread is stopped at a
- breakpoint that needs stepping-off, but that should not be visible
- to the user/frontend, and neither should the frontend/user be
- allowed to proceed any of the threads that happen to be stopped for
- internal run control handling, if a previous command wanted them
- resumed. */
-
ptid_t
user_visible_resume_ptid (int step)
{
resume_ptid = inferior_ptid;
}
else if ((scheduler_mode == schedlock_on)
- || (scheduler_mode == schedlock_step
- && (step || singlestep_breakpoints_inserted_p)))
+ || (scheduler_mode == schedlock_step && step))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
}
+ /* We may actually resume fewer threads at first, e.g., if a thread
+ is stopped at a breakpoint that needs stepping-off, but that
+ should not be visible to the user/frontend, and neither should
+ the frontend/user be allowed to proceed any of the threads that
+ happen to be stopped for internal run control handling, if a
+ previous command wanted them resumed. */
return resume_ptid;
}
void
resume (int step, enum gdb_signal sig)
{
- int should_resume = 1;
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct thread_info *tp = inferior_thread ();
CORE_ADDR pc = regcache_read_pc (regcache);
struct address_space *aspace = get_regcache_aspace (regcache);
+ ptid_t resume_ptid;
+ /* From here on, this represents the caller's step vs continue
+ request, while STEP represents what we'll actually request the
+ target to do. STEP can decay from a step to a continue, if e.g.,
+ we need to implement single-stepping with breakpoints (software
+ single-step). When deciding whether "set scheduler-locking step"
+ applies, it's the callers intention that counts. */
+ const int entry_step = step;
QUIT;
{
/* Got placed in displaced stepping queue. Will be resumed
later when all the currently queued displaced stepping
- requests finish. The thread is not executing at this point,
- and the call to set_executing will be made later. But we
- need to call set_running here, since from frontend point of view,
- the thread is running. */
- set_running (inferior_ptid, 1);
+ requests finish. The thread is not executing at this
+ point, and the call to set_executing will be made later.
+ But we need to call set_running here, since from the
+ user/frontend's point of view, threads were set running.
+ Unless we're calling an inferior function, as in that
+ case we pretend the inferior doesn't run at all. */
+ if (!tp->control.in_infcall)
+ set_running (user_visible_resume_ptid (entry_step), 1);
discard_cleanups (old_cleanups);
return;
}
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
- insert_breakpoints ();
+ clear_step_over_info ();
tp->control.trap_expected = 0;
+
+ insert_breakpoints ();
}
- if (should_resume)
- {
- ptid_t resume_ptid;
+ /* If STEP is set, it's a request to use hardware stepping
+ facilities. But in that case, we should never
+ use singlestep breakpoint. */
+ gdb_assert (!(singlestep_breakpoints_inserted_p && step));
- /* If STEP is set, it's a request to use hardware stepping
- facilities. But in that case, we should never
- use singlestep breakpoint. */
- gdb_assert (!(singlestep_breakpoints_inserted_p && step));
+ /* Decide the set of threads to ask the target to resume. Start
+ by assuming everything will be resumed, than narrow the set
+ by applying increasingly restricting conditions. */
+ resume_ptid = user_visible_resume_ptid (entry_step);
- /* Decide the set of threads to ask the target to resume. Start
- by assuming everything will be resumed, than narrow the set
- by applying increasingly restricting conditions. */
- resume_ptid = user_visible_resume_ptid (step);
+ /* Even if RESUME_PTID is a wildcard, and we end up resuming less
+ (e.g., we might need to step over a breakpoint), from the
+ user/frontend's point of view, all threads in RESUME_PTID are now
+ running. Unless we're calling an inferior function, as in that
+ case pretend we inferior doesn't run at all. */
+ if (!tp->control.in_infcall)
+ set_running (resume_ptid, 1);
- /* Maybe resume a single thread after all. */
- if (singlestep_breakpoints_inserted_p
- && stepping_past_singlestep_breakpoint)
- {
- /* The situation here is as follows. In thread T1 we wanted to
- single-step. Lacking hardware single-stepping we've
- set breakpoint at the PC of the next instruction -- call it
- P. After resuming, we've hit that breakpoint in thread T2.
- Now we've removed original breakpoint, inserted breakpoint
- at P+1, and try to step to advance T2 past breakpoint.
- We need to step only T2, as if T1 is allowed to freely run,
- it can run past P, and if other threads are allowed to run,
- they can hit breakpoint at P+1, and nested hits of single-step
- breakpoints is not something we'd want -- that's complicated
- to support, and has no value. */
- resume_ptid = inferior_ptid;
- }
- else if ((step || singlestep_breakpoints_inserted_p)
- && tp->control.trap_expected)
- {
- /* We're allowing a thread to run past a breakpoint it has
- hit, by single-stepping the thread with the breakpoint
- removed. In which case, we need to single-step only this
- thread, and keep others stopped, as they can miss this
- breakpoint if allowed to run.
-
- The current code actually removes all breakpoints when
- doing this, not just the one being stepped over, so if we
- let other threads run, we can actually miss any
- breakpoint, not just the one at PC. */
- resume_ptid = inferior_ptid;
- }
+ /* Maybe resume a single thread after all. */
+ if ((step || singlestep_breakpoints_inserted_p)
+ && tp->control.trap_expected)
+ {
+ /* We're allowing a thread to run past a breakpoint it has
+ hit, by single-stepping the thread with the breakpoint
+ removed. In which case, we need to single-step only this
+ thread, and keep others stopped, as they can miss this
+ breakpoint if allowed to run. */
+ resume_ptid = inferior_ptid;
+ }
- if (gdbarch_cannot_step_breakpoint (gdbarch))
- {
- /* Most targets can step a breakpoint instruction, thus
- executing it normally. But if this one cannot, just
- continue and we will hit it anyway. */
- if (step && breakpoint_inserted_here_p (aspace, pc))
- step = 0;
- }
+ if (gdbarch_cannot_step_breakpoint (gdbarch))
+ {
+ /* Most targets can step a breakpoint instruction, thus
+ executing it normally. But if this one cannot, just
+ continue and we will hit it anyway. */
+ if (step && breakpoint_inserted_here_p (aspace, pc))
+ step = 0;
+ }
- if (debug_displaced
- && use_displaced_stepping (gdbarch)
- && tp->control.trap_expected)
- {
- struct regcache *resume_regcache = get_thread_regcache (resume_ptid);
- struct gdbarch *resume_gdbarch = get_regcache_arch (resume_regcache);
- CORE_ADDR actual_pc = regcache_read_pc (resume_regcache);
- gdb_byte buf[4];
-
- fprintf_unfiltered (gdb_stdlog, "displaced: run %s: ",
- paddress (resume_gdbarch, actual_pc));
- read_memory (actual_pc, buf, sizeof (buf));
- displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
- }
-
- if (tp->control.may_range_step)
- {
- /* If we're resuming a thread with the PC out of the step
- range, then we're doing some nested/finer run control
- operation, like stepping the thread out of the dynamic
- linker or the displaced stepping scratch pad. We
- shouldn't have allowed a range step then. */
- gdb_assert (pc_in_thread_step_range (pc, tp));
- }
+ if (debug_displaced
+ && use_displaced_stepping (gdbarch)
+ && tp->control.trap_expected)
+ {
+ struct regcache *resume_regcache = get_thread_regcache (resume_ptid);
+ struct gdbarch *resume_gdbarch = get_regcache_arch (resume_regcache);
+ CORE_ADDR actual_pc = regcache_read_pc (resume_regcache);
+ gdb_byte buf[4];
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- /* Avoid confusing the next resume, if the next stop/resume
- happens to apply to another thread. */
- tp->suspend.stop_signal = GDB_SIGNAL_0;
-
- /* Advise target which signals may be handled silently. If we have
- removed breakpoints because we are stepping over one (which can
- happen only if we are not using displaced stepping), we need to
- receive all signals to avoid accidentally skipping a breakpoint
- during execution of a signal handler. */
- if ((step || singlestep_breakpoints_inserted_p)
- && tp->control.trap_expected
- && !use_displaced_stepping (gdbarch))
- target_pass_signals (0, NULL);
- else
- target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
+ fprintf_unfiltered (gdb_stdlog, "displaced: run %s: ",
+ paddress (resume_gdbarch, actual_pc));
+ read_memory (actual_pc, buf, sizeof (buf));
+ displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
+ }
- target_resume (resume_ptid, step, sig);
+ if (tp->control.may_range_step)
+ {
+ /* If we're resuming a thread with the PC out of the step
+ range, then we're doing some nested/finer run control
+ operation, like stepping the thread out of the dynamic
+ linker or the displaced stepping scratch pad. We
+ shouldn't have allowed a range step then. */
+ gdb_assert (pc_in_thread_step_range (pc, tp));
}
+ /* Install inferior's terminal modes. */
+ target_terminal_inferior ();
+
+ /* Avoid confusing the next resume, if the next stop/resume
+ happens to apply to another thread. */
+ tp->suspend.stop_signal = GDB_SIGNAL_0;
+
+ /* Advise target which signals may be handled silently. If we have
+ removed breakpoints because we are stepping over one (which can
+ happen only if we are not using displaced stepping), we need to
+ receive all signals to avoid accidentally skipping a breakpoint
+ during execution of a signal handler. */
+ if ((step || singlestep_breakpoints_inserted_p)
+ && tp->control.trap_expected
+ && !use_displaced_stepping (gdbarch))
+ target_pass_signals (0, NULL);
+ else
+ target_pass_signals ((int) GDB_SIGNAL_LAST, signal_pass);
+
+ target_resume (resume_ptid, step, sig);
+
discard_cleanups (old_cleanups);
}
\f
"infrun: clear_proceed_status_thread (%s)\n",
target_pid_to_str (tp->ptid));
+ /* If this signal should not be seen by program, give it zero.
+ Used for debugging signals. */
+ if (!signal_pass_state (tp->suspend.stop_signal))
+ tp->suspend.stop_signal = GDB_SIGNAL_0;
+
tp->control.trap_expected = 0;
tp->control.step_range_start = 0;
tp->control.step_range_end = 0;
tp->control.proceed_to_finish = 0;
+ tp->control.command_interp = NULL;
+
/* Discard any remaining commands or status from previous stop. */
bpstat_clear (&tp->control.stop_bpstat);
}
-static int
-clear_proceed_status_callback (struct thread_info *tp, void *data)
-{
- if (is_exited (tp->ptid))
- return 0;
-
- clear_proceed_status_thread (tp);
- return 0;
-}
-
void
-clear_proceed_status (void)
+clear_proceed_status (int step)
{
if (!non_stop)
{
- /* In all-stop mode, delete the per-thread status of all
- threads, even if inferior_ptid is null_ptid, there may be
- threads on the list. E.g., we may be launching a new
- process, while selecting the executable. */
- iterate_over_threads (clear_proceed_status_callback, NULL);
+ struct thread_info *tp;
+ ptid_t resume_ptid;
+
+ resume_ptid = user_visible_resume_ptid (step);
+
+ /* In all-stop mode, delete the per-thread status of all threads
+ we're about to resume, implicitly and explicitly. */
+ ALL_NON_EXITED_THREADS (tp)
+ {
+ if (!ptid_match (tp->ptid, resume_ptid))
+ continue;
+ clear_proceed_status_thread (tp);
+ }
}
if (!ptid_equal (inferior_ptid, null_ptid))
stop_after_trap = 0;
+ clear_step_over_info ();
+
observer_notify_about_to_proceed ();
if (stop_registers)
}
}
-/* Check the current thread against the thread that reported the most recent
- event. If a step-over is required return TRUE and set the current thread
- to the old thread. Otherwise return FALSE.
-
- This should be suitable for any targets that support threads. */
+/* Returns true if TP is still stopped at a breakpoint that needs
+ stepping-over in order to make progress. If the breakpoint is gone
+ meanwhile, we can skip the whole step-over dance. */
static int
-prepare_to_proceed (int step)
+thread_still_needs_step_over (struct thread_info *tp)
{
- ptid_t wait_ptid;
- struct target_waitstatus wait_status;
- int schedlock_enabled;
-
- /* With non-stop mode on, threads are always handled individually. */
- gdb_assert (! non_stop);
+ if (tp->stepping_over_breakpoint)
+ {
+ struct regcache *regcache = get_thread_regcache (tp->ptid);
- /* Get the last target status returned by target_wait(). */
- get_last_target_status (&wait_ptid, &wait_status);
+ if (breakpoint_here_p (get_regcache_aspace (regcache),
+ regcache_read_pc (regcache)))
+ return 1;
- /* Make sure we were stopped at a breakpoint. */
- if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != GDB_SIGNAL_TRAP
- && wait_status.value.sig != GDB_SIGNAL_ILL
- && wait_status.value.sig != GDB_SIGNAL_SEGV
- && wait_status.value.sig != GDB_SIGNAL_EMT))
- {
- return 0;
+ tp->stepping_over_breakpoint = 0;
}
- schedlock_enabled = (scheduler_mode == schedlock_on
- || (scheduler_mode == schedlock_step
- && step));
+ return 0;
+}
- /* Don't switch over to WAIT_PTID if scheduler locking is on. */
- if (schedlock_enabled)
- return 0;
+/* Returns true if scheduler locking applies. STEP indicates whether
+ we're about to do a step/next-like command to a thread. */
- /* Don't switch over if we're about to resume some other process
- other than WAIT_PTID's, and schedule-multiple is off. */
- if (!sched_multi
- && ptid_get_pid (wait_ptid) != ptid_get_pid (inferior_ptid))
- return 0;
+static int
+schedlock_applies (int step)
+{
+ return (scheduler_mode == schedlock_on
+ || (scheduler_mode == schedlock_step
+ && step));
+}
- /* Switched over from WAIT_PID. */
- if (!ptid_equal (wait_ptid, minus_one_ptid)
- && !ptid_equal (inferior_ptid, wait_ptid))
- {
- struct regcache *regcache = get_thread_regcache (wait_ptid);
+/* Look a thread other than EXCEPT that has previously reported a
+ breakpoint event, and thus needs a step-over in order to make
+ progress. Returns NULL is none is found. STEP indicates whether
+ we're about to step the current thread, in order to decide whether
+ "set scheduler-locking step" applies. */
- if (breakpoint_here_p (get_regcache_aspace (regcache),
- regcache_read_pc (regcache)))
- {
- /* If stepping, remember current thread to switch back to. */
- if (step)
- deferred_step_ptid = inferior_ptid;
+static struct thread_info *
+find_thread_needs_step_over (int step, struct thread_info *except)
+{
+ struct thread_info *tp, *current;
- /* Switch back to WAIT_PID thread. */
- switch_to_thread (wait_ptid);
+ /* With non-stop mode on, threads are always handled individually. */
+ gdb_assert (! non_stop);
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: prepare_to_proceed (step=%d), "
- "switched to [%s]\n",
- step, target_pid_to_str (inferior_ptid));
+ current = inferior_thread ();
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- return 1;
- }
+ /* If scheduler locking applies, we can avoid iterating over all
+ threads. */
+ if (schedlock_applies (step))
+ {
+ if (except != current
+ && thread_still_needs_step_over (current))
+ return current;
+
+ return NULL;
}
- return 0;
+ ALL_NON_EXITED_THREADS (tp)
+ {
+ /* Ignore the EXCEPT thread. */
+ if (tp == except)
+ continue;
+ /* Ignore threads of processes we're not resuming. */
+ if (!sched_multi
+ && ptid_get_pid (tp->ptid) != ptid_get_pid (inferior_ptid))
+ continue;
+
+ if (thread_still_needs_step_over (tp))
+ return tp;
+ }
+
+ return NULL;
}
/* Basic routine for continuing the program in various fashions.
struct thread_info *tp;
CORE_ADDR pc;
struct address_space *aspace;
- /* GDB may force the inferior to step due to various reasons. */
- int force_step = 0;
/* If we're stopped at a fork/vfork, follow the branch set by the
"set follow-fork-mode" command; otherwise, we'll just proceed
gdbarch = get_regcache_arch (regcache);
aspace = get_regcache_aspace (regcache);
pc = regcache_read_pc (regcache);
+ tp = inferior_thread ();
if (step > 0)
step_start_function = find_pc_function (pc);
if (step < 0)
stop_after_trap = 1;
+ /* Fill in with reasonable starting values. */
+ init_thread_stepping_state (tp);
+
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc && breakpoint_here_p (aspace, pc)
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
-
- force_step = 1;
+ tp->stepping_over_breakpoint = 1;
else if (gdbarch_single_step_through_delay_p (gdbarch)
&& gdbarch_single_step_through_delay (gdbarch,
get_current_frame ()))
/* We stepped onto an instruction that needs to be stepped
again before re-inserting the breakpoint, do so. */
- force_step = 1;
+ tp->stepping_over_breakpoint = 1;
}
else
{
regcache_write_pc (regcache, addr);
}
+ if (siggnal != GDB_SIGNAL_DEFAULT)
+ tp->suspend.stop_signal = siggnal;
+
+ /* Record the interpreter that issued the execution command that
+ caused this thread to resume. If the top level interpreter is
+ MI/async, and the execution command was a CLI command
+ (next/step/etc.), we'll want to print stop event output to the MI
+ console channel (the stepped-to line, etc.), as if the user
+ entered the execution command on a real GDB console. */
+ inferior_thread ()->control.command_interp = command_interp ();
+
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: proceed (addr=%s, signal=%s, step=%d)\n",
;
else
{
+ struct thread_info *step_over;
+
/* In a multi-threaded task we may select another thread and
then continue or step.
execution (i.e. it will report a breakpoint hit incorrectly).
So we must step over it first.
- prepare_to_proceed checks the current thread against the
- thread that reported the most recent event. If a step-over
- is required it returns TRUE and sets the current thread to
- the old thread. */
- if (prepare_to_proceed (step))
- force_step = 1;
- }
-
- /* prepare_to_proceed may change the current thread. */
- tp = inferior_thread ();
-
- if (force_step)
- {
- tp->control.trap_expected = 1;
- /* If displaced stepping is enabled, we can step over the
- breakpoint without hitting it, so leave all breakpoints
- inserted. Otherwise we need to disable all breakpoints, step
- one instruction, and then re-add them when that step is
- finished. */
- if (!use_displaced_stepping (gdbarch))
- remove_breakpoints ();
+ Look for a thread other than the current (TP) that reported a
+ breakpoint hit and hasn't been resumed yet since. */
+ step_over = find_thread_needs_step_over (step, tp);
+ if (step_over != NULL)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: need to step-over [%s] first\n",
+ target_pid_to_str (step_over->ptid));
+
+ /* Store the prev_pc for the stepping thread too, needed by
+ switch_back_to_stepping thread. */
+ tp->prev_pc = regcache_read_pc (get_current_regcache ());
+ switch_to_thread (step_over->ptid);
+ tp = step_over;
+ }
}
- /* We can insert breakpoints if we're not trying to step over one,
- or if we are stepping over one but we're using displaced stepping
- to do so. */
- if (! tp->control.trap_expected || use_displaced_stepping (gdbarch))
- insert_breakpoints ();
-
- if (!non_stop)
+ /* If we need to step over a breakpoint, and we're not using
+ displaced stepping to do so, insert all breakpoints (watchpoints,
+ etc.) but the one we're stepping over, step one instruction, and
+ then re-insert the breakpoint when that step is finished. */
+ if (tp->stepping_over_breakpoint && !use_displaced_stepping (gdbarch))
{
- /* Pass the last stop signal to the thread we're resuming,
- irrespective of whether the current thread is the thread that
- got the last event or not. This was historically GDB's
- behaviour before keeping a stop_signal per thread. */
+ struct regcache *regcache = get_current_regcache ();
- struct thread_info *last_thread;
- ptid_t last_ptid;
- struct target_waitstatus last_status;
-
- get_last_target_status (&last_ptid, &last_status);
- if (!ptid_equal (inferior_ptid, last_ptid)
- && !ptid_equal (last_ptid, null_ptid)
- && !ptid_equal (last_ptid, minus_one_ptid))
- {
- last_thread = find_thread_ptid (last_ptid);
- if (last_thread)
- {
- tp->suspend.stop_signal = last_thread->suspend.stop_signal;
- last_thread->suspend.stop_signal = GDB_SIGNAL_0;
- }
- }
+ set_step_over_info (get_regcache_aspace (regcache),
+ regcache_read_pc (regcache));
}
+ else
+ clear_step_over_info ();
- if (siggnal != GDB_SIGNAL_DEFAULT)
- tp->suspend.stop_signal = siggnal;
- /* If this signal should not be seen by program,
- give it zero. Used for debugging signals. */
- else if (!signal_program[tp->suspend.stop_signal])
- tp->suspend.stop_signal = GDB_SIGNAL_0;
+ insert_breakpoints ();
+
+ tp->control.trap_expected = tp->stepping_over_breakpoint;
annotate_starting ();
gdb_flush (gdb_stdout);
/* Refresh prev_pc value just prior to resuming. This used to be
- done in stop_stepping, however, setting prev_pc there did not handle
+ done in stop_waiting, however, setting prev_pc there did not handle
scenarios such as inferior function calls or returning from
a function via the return command. In those cases, the prev_pc
value was not set properly for subsequent commands. The prev_pc value
correctly when the inferior is stopped. */
tp->prev_pc = regcache_read_pc (get_current_regcache ());
- /* Fill in with reasonable starting values. */
- init_thread_stepping_state (tp);
-
/* Reset to normal state. */
init_infwait_state ();
/* Resume inferior. */
- resume (force_step || step || bpstat_should_step (),
+ resume (tp->control.trap_expected || step || bpstat_should_step (),
tp->suspend.stop_signal);
/* Wait for it to stop (if not standalone)
breakpoint_init_inferior (inf_starting);
- clear_proceed_status ();
-
- stepping_past_singlestep_breakpoint = 0;
- deferred_step_ptid = null_ptid;
+ clear_proceed_status (0);
target_last_wait_ptid = minus_one_ptid;
/* Discard any skipped inlined frames. */
clear_inline_frame_state (minus_one_ptid);
+
+ singlestep_ptid = null_ptid;
+ singlestep_pc = 0;
}
\f
enum infwait_states
{
infwait_normal_state,
- infwait_thread_hop_state,
infwait_step_watch_state,
infwait_nonstep_watch_state
};
infwait_nonstep_watch_state state, and the thread reported an
event. */
int stepped_after_stopped_by_watchpoint;
+
+ /* True if the event thread hit the single-step breakpoint of
+ another thread. Thus the event doesn't cause a stop, the thread
+ needs to be single-stepped past the single-step breakpoint before
+ we can switch back to the original stepping thread. */
+ int hit_singlestep_breakpoint;
};
static void handle_inferior_event (struct execution_control_state *ecs);
static void check_exception_resume (struct execution_control_state *,
struct frame_info *);
-static void stop_stepping (struct execution_control_state *ecs);
+static void end_stepping_range (struct execution_control_state *ecs);
+static void stop_waiting (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
static void process_event_stop_test (struct execution_control_state *ecs);
old_chain = make_cleanup_restore_current_thread ();
+ overlay_cache_invalid = 1;
+ /* Flush target cache before starting to handle each event.
+ Target was running and cache could be stale. This is just a
+ heuristic. Running threads may modify target memory, but we
+ don't get any event. */
+ target_dcache_invalidate ();
+
/* Go through handle_inferior_event/normal_stop, so we always
have consistent output as if the stop event had been
reported. */
memset (ecs, 0, sizeof (*ecs));
overlay_cache_invalid = 1;
+ /* Flush target cache before starting to handle each event.
+ Target was running and cache could be stale. This is just a
+ heuristic. Running threads may modify target memory, but we
+ don't get any event. */
+ target_dcache_invalidate ();
if (deprecated_target_wait_hook)
ecs->ptid = deprecated_target_wait_hook (pid_ptid, &ecs->ws, 0);
overlay_cache_invalid = 1;
+ /* Flush target cache before starting to handle each event.
+ Target was running and cache could be stale. This is just a
+ heuristic. Running threads may modify target memory, but we
+ don't get any event. */
+ target_dcache_invalidate ();
+
if (deprecated_target_wait_hook)
ecs->ptid = deprecated_target_wait_hook (waiton_ptid, &ecs->ws, 0);
else
make_cleanup_restore_current_thread ();
overlay_cache_invalid = 1;
+ /* Flush target cache before starting to handle each event. Target
+ was running and cache could be stale. This is just a heuristic.
+ Running threads may modify target memory, but we don't get any
+ event. */
+ target_dcache_invalidate ();
make_cleanup_restore_integer (&execution_direction);
execution_direction = target_execution_direction ();
restore the prompt (a synchronous execution command has finished,
and we're ready for input). */
if (interpreter_async && was_sync && !sync_execution)
- display_gdb_prompt (0);
+ observer_notify_sync_execution_done ();
if (cmd_done
&& !was_sync
tss->step_after_step_resume_breakpoint = 0;
}
+/* Set the cached copy of the last ptid/waitstatus. */
+
+static void
+set_last_target_status (ptid_t ptid, struct target_waitstatus status)
+{
+ target_last_wait_ptid = ptid;
+ target_last_waitstatus = status;
+}
+
/* Return the cached copy of the last pid/waitstatus returned by
target_wait()/deprecated_target_wait_hook(). The data is actually
cached by handle_inferior_event(), which gets called immediately
struct regcache *regcache;
struct gdbarch *gdbarch;
struct address_space *aspace;
- CORE_ADDR breakpoint_pc;
+ CORE_ADDR breakpoint_pc, decr_pc;
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
we aren't, just return.
we have nothing to do. */
regcache = get_thread_regcache (ecs->ptid);
gdbarch = get_regcache_arch (regcache);
- if (gdbarch_decr_pc_after_break (gdbarch) == 0)
+
+ decr_pc = target_decr_pc_after_break (gdbarch);
+ if (decr_pc == 0)
return;
aspace = get_regcache_aspace (regcache);
/* Find the location where (if we've hit a breakpoint) the
breakpoint would be. */
- breakpoint_pc = regcache_read_pc (regcache)
- - gdbarch_decr_pc_after_break (gdbarch);
+ breakpoint_pc = regcache_read_pc (regcache) - decr_pc;
/* Check whether there actually is a software breakpoint inserted at
that location.
{
struct cleanup *old_cleanups = make_cleanup (null_cleanup, NULL);
- if (RECORD_IS_USED)
+ if (record_full_is_used ())
record_full_gdb_operation_disable_set ();
/* When using hardware single-step, a SIGTRAP is reported for both
ecs->stop_func_start
+= gdbarch_deprecated_function_start_offset (gdbarch);
+ if (gdbarch_skip_entrypoint_p (gdbarch))
+ ecs->stop_func_start = gdbarch_skip_entrypoint (gdbarch,
+ ecs->stop_func_start);
+
ecs->stop_func_filled_in = 1;
}
}
The alternatives are:
- 1) stop_stepping and return; to really stop and return to the
+ 1) stop_waiting and return; to really stop and return to the
debugger.
2) keep_going and return; to wait for the next event (set
}
/* Cache the last pid/waitstatus. */
- target_last_wait_ptid = ecs->ptid;
- target_last_waitstatus = ecs->ws;
+ set_last_target_status (ecs->ptid, ecs->ws);
/* Always clear state belonging to the previous time we stopped. */
stop_stack_dummy = STOP_NONE;
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_NO_RESUMED\n");
stop_print_frame = 0;
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
switch (infwait_state)
{
- case infwait_thread_hop_state:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
- break;
-
case infwait_normal_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
normal_stop. */
stop_print_frame = 1;
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
}
{
/* Loading of shared libraries might have changed breakpoint
addresses. Make sure new breakpoints are inserted. */
- if (stop_soon == NO_STOP_QUIETLY
- && !breakpoints_always_inserted_mode ())
+ if (stop_soon == NO_STOP_QUIETLY)
insert_breakpoints ();
resume (0, GDB_SIGNAL_0);
prepare_to_wait (ecs);
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
current_inferior ()->has_exit_code = 1;
current_inferior ()->exit_code = (LONGEST) ecs->ws.value.integer;
- print_exited_reason (ecs->ws.value.integer);
+ /* Support the --return-child-result option. */
+ return_child_result_value = ecs->ws.value.integer;
+
+ observer_notify_exited (ecs->ws.value.integer);
}
else
{
Cannot fill $_exitsignal with the correct signal number.\n"));
}
- print_signal_exited_reason (ecs->ws.value.sig);
+ observer_notify_signal_exited (ecs->ws.value.sig);
}
gdb_flush (gdb_stdout);
singlestep_breakpoints_inserted_p = 0;
cancel_single_step_breakpoints ();
stop_print_frame = 0;
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
/* The following are the only cases in which we keep going;
if (should_resume)
keep_going (ecs);
else
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
process_event_stop_test (ecs);
singlestep_breakpoints_inserted_p = 0;
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
- print_no_history_reason ();
- stop_stepping (ecs);
+ observer_notify_no_history ();
+ stop_waiting (ecs);
return;
}
}
enum stop_kind stop_soon;
int random_signal;
- if (ecs->ws.kind == TARGET_WAITKIND_STOPPED)
- {
- /* Do we need to clean up the state of a thread that has
- completed a displaced single-step? (Doing so usually affects
- the PC, so do it here, before we set stop_pc.) */
- displaced_step_fixup (ecs->ptid,
- ecs->event_thread->suspend.stop_signal);
+ gdb_assert (ecs->ws.kind == TARGET_WAITKIND_STOPPED);
- /* If we either finished a single-step or hit a breakpoint, but
- the user wanted this thread to be stopped, pretend we got a
- SIG0 (generic unsignaled stop). */
+ /* Do we need to clean up the state of a thread that has
+ completed a displaced single-step? (Doing so usually affects
+ the PC, so do it here, before we set stop_pc.) */
+ displaced_step_fixup (ecs->ptid,
+ ecs->event_thread->suspend.stop_signal);
- if (ecs->event_thread->stop_requested
- && ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
- ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
- }
+ /* If we either finished a single-step or hit a breakpoint, but
+ the user wanted this thread to be stopped, pretend we got a
+ SIG0 (generic unsignaled stop). */
+ if (ecs->event_thread->stop_requested
+ && ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_print_frame = 1;
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
stop_print_frame = 0;
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
|| ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_0))
{
stop_print_frame = 1;
- stop_stepping (ecs);
+ stop_waiting (ecs);
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
return;
}
- if (stepping_past_singlestep_breakpoint)
- {
- gdb_assert (singlestep_breakpoints_inserted_p);
- gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
- gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
-
- stepping_past_singlestep_breakpoint = 0;
-
- /* We've either finished single-stepping past the single-step
- breakpoint, or stopped for some other reason. It would be nice if
- we could tell, but we can't reliably. */
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: stepping_past_"
- "singlestep_breakpoint\n");
- /* Pull the single step breakpoints out of the target. */
- if (!ptid_equal (ecs->ptid, inferior_ptid))
- context_switch (ecs->ptid);
- remove_single_step_breakpoints ();
- singlestep_breakpoints_inserted_p = 0;
-
- ecs->event_thread->control.trap_expected = 0;
-
- context_switch (saved_singlestep_ptid);
- if (deprecated_context_hook)
- deprecated_context_hook (pid_to_thread_id (saved_singlestep_ptid));
-
- resume (1, GDB_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
- }
-
- if (!ptid_equal (deferred_step_ptid, null_ptid))
- {
- /* In non-stop mode, there's never a deferred_step_ptid set. */
- gdb_assert (!non_stop);
-
- /* If we stopped for some other reason than single-stepping, ignore
- the fact that we were supposed to switch back. */
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: handling deferred step\n");
-
- /* Pull the single step breakpoints out of the target. */
- if (singlestep_breakpoints_inserted_p)
- {
- if (!ptid_equal (ecs->ptid, inferior_ptid))
- context_switch (ecs->ptid);
- remove_single_step_breakpoints ();
- singlestep_breakpoints_inserted_p = 0;
- }
-
- ecs->event_thread->control.trap_expected = 0;
-
- context_switch (deferred_step_ptid);
- deferred_step_ptid = null_ptid;
- /* Suppress spurious "Switching to ..." message. */
- previous_inferior_ptid = inferior_ptid;
-
- resume (1, GDB_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
-
- deferred_step_ptid = null_ptid;
- }
-
- /* See if a thread hit a thread-specific breakpoint that was meant for
- another thread. If so, then step that thread past the breakpoint,
- and continue it. */
-
- if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
- {
- int thread_hop_needed = 0;
- struct address_space *aspace =
- get_regcache_aspace (get_thread_regcache (ecs->ptid));
-
- /* Check if a regular breakpoint has been hit before checking
- for a potential single step breakpoint. Otherwise, GDB will
- not see this breakpoint hit when stepping onto breakpoints. */
- if (regular_breakpoint_inserted_here_p (aspace, stop_pc))
- {
- if (!breakpoint_thread_match (aspace, stop_pc, ecs->ptid))
- thread_hop_needed = 1;
- }
- else if (singlestep_breakpoints_inserted_p)
- {
- /* We have not context switched yet, so this should be true
- no matter which thread hit the singlestep breakpoint. */
- gdb_assert (ptid_equal (inferior_ptid, singlestep_ptid));
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: software single step "
- "trap for %s\n",
- target_pid_to_str (ecs->ptid));
-
- /* The call to in_thread_list is necessary because PTIDs sometimes
- change when we go from single-threaded to multi-threaded. If
- the singlestep_ptid is still in the list, assume that it is
- really different from ecs->ptid. */
- if (!ptid_equal (singlestep_ptid, ecs->ptid)
- && in_thread_list (singlestep_ptid))
- {
- /* If the PC of the thread we were trying to single-step
- has changed, discard this event (which we were going
- to ignore anyway), and pretend we saw that thread
- trap. This prevents us continuously moving the
- single-step breakpoint forward, one instruction at a
- time. If the PC has changed, then the thread we were
- trying to single-step has trapped or been signalled,
- but the event has not been reported to GDB yet.
-
- There might be some cases where this loses signal
- information, if a signal has arrived at exactly the
- same time that the PC changed, but this is the best
- we can do with the information available. Perhaps we
- should arrange to report all events for all threads
- when they stop, or to re-poll the remote looking for
- this particular thread (i.e. temporarily enable
- schedlock). */
-
- CORE_ADDR new_singlestep_pc
- = regcache_read_pc (get_thread_regcache (singlestep_ptid));
-
- if (new_singlestep_pc != singlestep_pc)
- {
- enum gdb_signal stop_signal;
-
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
- " but expected thread advanced also\n");
-
- /* The current context still belongs to
- singlestep_ptid. Don't swap here, since that's
- the context we want to use. Just fudge our
- state and continue. */
- stop_signal = ecs->event_thread->suspend.stop_signal;
- ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
- ecs->ptid = singlestep_ptid;
- ecs->event_thread = find_thread_ptid (ecs->ptid);
- ecs->event_thread->suspend.stop_signal = stop_signal;
- stop_pc = new_singlestep_pc;
- }
- else
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: unexpected thread\n");
-
- thread_hop_needed = 1;
- stepping_past_singlestep_breakpoint = 1;
- saved_singlestep_ptid = singlestep_ptid;
- }
- }
- }
-
- if (thread_hop_needed)
- {
- struct regcache *thread_regcache;
- int remove_status = 0;
-
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
-
- /* Switch context before touching inferior memory, the
- previous thread may have exited. */
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs->ptid);
-
- /* Saw a breakpoint, but it was hit by the wrong thread.
- Just continue. */
-
- if (singlestep_breakpoints_inserted_p)
- {
- /* Pull the single step breakpoints out of the target. */
- remove_single_step_breakpoints ();
- singlestep_breakpoints_inserted_p = 0;
- }
-
- /* If the arch can displace step, don't remove the
- breakpoints. */
- thread_regcache = get_thread_regcache (ecs->ptid);
- if (!use_displaced_stepping (get_regcache_arch (thread_regcache)))
- remove_status = remove_breakpoints ();
-
- /* Did we fail to remove breakpoints? If so, try
- to set the PC past the bp. (There's at least
- one situation in which we can fail to remove
- the bp's: On HP-UX's that use ttrace, we can't
- change the address space of a vforking child
- process until the child exits (well, okay, not
- then either :-) or execs. */
- if (remove_status != 0)
- error (_("Cannot step over breakpoint hit in wrong thread"));
- else
- { /* Single step */
- if (!non_stop)
- {
- /* Only need to require the next event from this
- thread in all-stop mode. */
- waiton_ptid = ecs->ptid;
- infwait_state = infwait_thread_hop_state;
- }
-
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- }
- }
-
/* See if something interesting happened to the non-current thread. If
so, then switch to that thread. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
frame = get_current_frame ();
gdbarch = get_frame_arch (frame);
+ /* Pull the single step breakpoints out of the target. */
if (singlestep_breakpoints_inserted_p)
{
- /* Pull the single step breakpoints out of the target. */
+ /* However, before doing so, if this single-step breakpoint was
+ actually for another thread, set this thread up for moving
+ past it. */
+ if (!ptid_equal (ecs->ptid, singlestep_ptid)
+ && ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
+ {
+ struct regcache *regcache;
+ struct address_space *aspace;
+ CORE_ADDR pc;
+
+ regcache = get_thread_regcache (ecs->ptid);
+ aspace = get_regcache_aspace (regcache);
+ pc = regcache_read_pc (regcache);
+ if (single_step_breakpoint_inserted_here_p (aspace, pc))
+ {
+ if (debug_infrun)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: [%s] hit step over single-step"
+ " breakpoint of [%s]\n",
+ target_pid_to_str (ecs->ptid),
+ target_pid_to_str (singlestep_ptid));
+ }
+ ecs->hit_singlestep_breakpoint = 1;
+ }
+ }
+
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
watchpoint expression. We do this by single-stepping the
target.
- It may not be necessary to disable the watchpoint to stop over
+ It may not be necessary to disable the watchpoint to step over
it. For example, the PA can (with some kernel cooperation)
single step over a watchpoint without disabling the watchpoint.
random_signal = !(ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP
&& currently_stepping (ecs->event_thread));
+ /* Perhaps the thread hit a single-step breakpoint of _another_
+ thread. Single-step breakpoints are transparent to the
+ breakpoints module. */
+ if (random_signal)
+ random_signal = !ecs->hit_singlestep_breakpoint;
+
/* No? Perhaps we got a moribund watchpoint. */
if (random_signal)
random_signal = !stopped_by_watchpoint;
if (random_signal)
{
/* Signal not for debugging purposes. */
- int printed = 0;
struct inferior *inf = find_inferior_pid (ptid_get_pid (ecs->ptid));
enum gdb_signal stop_signal = ecs->event_thread->suspend.stop_signal;
stopped_by_random_signal = 1;
- if (signal_print[ecs->event_thread->suspend.stop_signal])
- {
- printed = 1;
- target_terminal_ours_for_output ();
- print_signal_received_reason
- (ecs->event_thread->suspend.stop_signal);
- }
/* Always stop on signals if we're either just gaining control
of the program, or the user explicitly requested this thread
to remain stopped. */
|| (!inf->detaching
&& signal_stop_state (ecs->event_thread->suspend.stop_signal)))
{
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
}
- /* If not going to stop, give terminal back
- if we took it away. */
- else if (printed)
- target_terminal_inferior ();
+
+ /* Notify observers the signal has "handle print" set. Note we
+ returned early above if stopping; normal_stop handles the
+ printing in that case. */
+ if (signal_print[ecs->event_thread->suspend.stop_signal])
+ {
+ /* The signal table tells us to print about this signal. */
+ target_terminal_ours_for_output ();
+ observer_notify_signal_received (ecs->event_thread->suspend.stop_signal);
+ target_terminal_inferior ();
+ }
/* Clear the signal if it should not be passed. */
if (signal_program[ecs->event_thread->suspend.stop_signal] == 0)
ecs->event_thread->step_after_step_resume_breakpoint = 1;
/* Reset trap_expected to ensure breakpoints are re-inserted. */
ecs->event_thread->control.trap_expected = 0;
- keep_going (ecs);
+
+ /* If we were nexting/stepping some other thread, switch to
+ it, so that we don't continue it, losing control. */
+ if (!switch_back_to_stepped_thread (ecs))
+ keep_going (ecs);
return;
}
if (what.is_longjmp)
{
- check_longjmp_breakpoint_for_call_dummy (ecs->event_thread->num);
+ check_longjmp_breakpoint_for_call_dummy (ecs->event_thread);
if (!frame_id_p (ecs->event_thread->initiating_frame))
{
exists. */
delete_step_resume_breakpoint (ecs->event_thread);
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
}
return;
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpointt via the
- cleanup chain, so no need to worry about it here. */
+ /* Assume the thread stopped for a breapoint. We'll still check
+ whether a/the breakpoint is there when the thread is next
+ resumed. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
- stop_stepping (ecs);
+ stop_waiting (ecs);
return;
case BPSTAT_WHAT_STOP_SILENT:
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
stop_print_frame = 0;
- /* We are about to nuke the step_resume_breakpoin via the
- cleanup chain, so no need to worry about it here. */
-
- stop_stepping (ecs);
+ /* Assume the thread stopped for a breapoint. We'll still check
+ whether a/the breakpoint is there when the thread is next
+ resumed. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ stop_waiting (ecs);
return;
case BPSTAT_WHAT_HP_STEP_RESUME:
if (stop_pc == ecs->event_thread->control.step_range_start
&& stop_pc != ecs->stop_func_start
&& execution_direction == EXEC_REVERSE)
- {
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
- }
+ end_stepping_range (ecs);
else
keep_going (ecs);
thought it was a subroutine call but it was not. Stop as
well. FENN */
/* And this works the same backward as frontward. MVS */
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
&& step_stop_if_no_debug)
{
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
/* If we have no line number and the step-stop-if-no-debug
is set, we stop the step so that the user has a chance to
switch in assembly mode. */
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
else
one instruction. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
or can this happen as a result of a return or longjmp?). */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
&& call_sal.symtab == ecs->event_thread->current_symtab)
step_into_inline_frame (ecs->ptid);
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
else
&& call_sal.symtab == ecs->event_thread->current_symtab)
keep_going (ecs);
else
- {
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
- }
+ end_stepping_range (ecs);
return;
}
}
if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
keep_going (ecs);
else
- {
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
- }
+ end_stepping_range (ecs);
return;
}
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: stepped to a different line\n");
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
if (!non_stop)
{
struct thread_info *tp;
+ struct thread_info *stepping_thread;
+ struct thread_info *step_over;
+
+ /* If any thread is blocked on some internal breakpoint, and we
+ simply need to step over that breakpoint to get it going
+ again, do that first. */
+
+ /* However, if we see an event for the stepping thread, then we
+ know all other threads have been moved past their breakpoints
+ already. Let the caller check whether the step is finished,
+ etc., before deciding to move it past a breakpoint. */
+ if (ecs->event_thread->control.step_range_end != 0)
+ return 0;
+
+ /* Check if the current thread is blocked on an incomplete
+ step-over, interrupted by a random signal. */
+ if (ecs->event_thread->control.trap_expected
+ && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP)
+ {
+ if (debug_infrun)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: need to finish step-over of [%s]\n",
+ target_pid_to_str (ecs->event_thread->ptid));
+ }
+ keep_going (ecs);
+ return 1;
+ }
+
+ /* Check if the current thread is blocked by a single-step
+ breakpoint of another thread. */
+ if (ecs->hit_singlestep_breakpoint)
+ {
+ if (debug_infrun)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: need to step [%s] over single-step "
+ "breakpoint\n",
+ target_pid_to_str (ecs->ptid));
+ }
+ keep_going (ecs);
+ return 1;
+ }
+
+ /* Otherwise, we no longer expect a trap in the current thread.
+ Clear the trap_expected flag before switching back -- this is
+ what keep_going does as well, if we call it. */
+ ecs->event_thread->control.trap_expected = 0;
+
+ /* Likewise, clear the signal if it should not be passed. */
+ if (!signal_program[ecs->event_thread->suspend.stop_signal])
+ ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
+
+ /* If scheduler locking applies even if not stepping, there's no
+ need to walk over threads. Above we've checked whether the
+ current thread is stepping. If some other thread not the
+ event thread is stepping, then it must be that scheduler
+ locking is not in effect. */
+ if (schedlock_applies (0))
+ return 0;
+
+ /* Look for the stepping/nexting thread, and check if any other
+ thread other than the stepping thread needs to start a
+ step-over. Do all step-overs before actually proceeding with
+ step/next/etc. */
+ stepping_thread = NULL;
+ step_over = NULL;
+ ALL_NON_EXITED_THREADS (tp)
+ {
+ /* Ignore threads of processes we're not resuming. */
+ if (!sched_multi
+ && ptid_get_pid (tp->ptid) != ptid_get_pid (inferior_ptid))
+ continue;
+
+ /* When stepping over a breakpoint, we lock all threads
+ except the one that needs to move past the breakpoint.
+ If a non-event thread has this set, the "incomplete
+ step-over" check above should have caught it earlier. */
+ gdb_assert (!tp->control.trap_expected);
- tp = iterate_over_threads (currently_stepping_or_nexting_callback,
- ecs->event_thread);
- if (tp)
+ /* Did we find the stepping thread? */
+ if (tp->control.step_range_end)
+ {
+ /* Yep. There should only one though. */
+ gdb_assert (stepping_thread == NULL);
+
+ /* The event thread is handled at the top, before we
+ enter this loop. */
+ gdb_assert (tp != ecs->event_thread);
+
+ /* If some thread other than the event thread is
+ stepping, then scheduler locking can't be in effect,
+ otherwise we wouldn't have resumed the current event
+ thread in the first place. */
+ gdb_assert (!schedlock_applies (1));
+
+ stepping_thread = tp;
+ }
+ else if (thread_still_needs_step_over (tp))
+ {
+ step_over = tp;
+
+ /* At the top we've returned early if the event thread
+ is stepping. If some other thread not the event
+ thread is stepping, then scheduler locking can't be
+ in effect, and we can resume this thread. No need to
+ keep looking for the stepping thread then. */
+ break;
+ }
+ }
+
+ if (step_over != NULL)
{
- /* However, if the current thread is blocked on some internal
- breakpoint, and we simply need to step over that breakpoint
- to get it going again, do that first. */
- if ((ecs->event_thread->control.trap_expected
- && ecs->event_thread->suspend.stop_signal != GDB_SIGNAL_TRAP)
- || ecs->event_thread->stepping_over_breakpoint)
+ tp = step_over;
+ if (debug_infrun)
{
- keep_going (ecs);
- return 1;
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: need to step-over [%s]\n",
+ target_pid_to_str (tp->ptid));
}
+ /* Only the stepping thread should have this set. */
+ gdb_assert (tp->control.step_range_end == 0);
+
+ ecs->ptid = tp->ptid;
+ ecs->event_thread = tp;
+ switch_to_thread (ecs->ptid);
+ keep_going (ecs);
+ return 1;
+ }
+
+ if (stepping_thread != NULL)
+ {
+ struct frame_info *frame;
+ struct gdbarch *gdbarch;
+
+ tp = stepping_thread;
+
/* If the stepping thread exited, then don't try to switch
back and resume it, which could fail in several different
ways depending on the target. Instead, just keep going.
return 1;
}
- /* Otherwise, we no longer expect a trap in the current thread.
- Clear the trap_expected flag before switching back -- this is
- what keep_going would do as well, if we called it. */
- ecs->event_thread->control.trap_expected = 0;
-
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: switching back to stepped thread\n");
ecs->event_thread = tp;
ecs->ptid = tp->ptid;
context_switch (ecs->ptid);
- keep_going (ecs);
+
+ stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
+
+ /* If the PC of the thread we were trying to single-step has
+ changed, then that thread has trapped or been signaled,
+ but the event has not been reported to GDB yet. Re-poll
+ the target looking for this particular thread's event
+ (i.e. temporarily enable schedlock) by:
+
+ - setting a break at the current PC
+ - resuming that particular thread, only (by setting
+ trap expected)
+
+ This prevents us continuously moving the single-step
+ breakpoint forward, one instruction at a time,
+ overstepping. */
+
+ if (gdbarch_software_single_step_p (gdbarch)
+ && stop_pc != tp->prev_pc)
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: expected thread advanced also\n");
+
+ insert_single_step_breakpoint (get_frame_arch (frame),
+ get_frame_address_space (frame),
+ stop_pc);
+ singlestep_breakpoints_inserted_p = 1;
+ ecs->event_thread->control.trap_expected = 1;
+ singlestep_ptid = inferior_ptid;
+ singlestep_pc = stop_pc;
+
+ resume (0, GDB_SIGNAL_0);
+ prepare_to_wait (ecs);
+ }
+ else
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: expected thread still "
+ "hasn't advanced\n");
+ keep_going (ecs);
+ }
+
return 1;
}
}
|| bpstat_should_step ());
}
-/* Returns true if any thread *but* the one passed in "data" is in the
- middle of stepping or of handling a "next". */
-
-static int
-currently_stepping_or_nexting_callback (struct thread_info *tp, void *data)
-{
- if (tp == data)
- return 0;
-
- return (tp->control.step_range_end
- || tp->control.trap_expected);
-}
-
/* Inferior has stepped into a subroutine call with source code that
we should not step over. Do step to the first line of code in
it. */
if (ecs->stop_func_start == stop_pc)
{
/* We are already there: stop now. */
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
return;
}
else
if (stop_func_sal.pc == stop_pc)
{
/* We're there already. Just stop stepping now. */
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ end_stepping_range (ecs);
}
else
{
static void
insert_exception_resume_breakpoint (struct thread_info *tp,
- struct block *b,
+ const struct block *b,
struct frame_info *frame,
struct symbol *sym)
{
static void
insert_exception_resume_from_probe (struct thread_info *tp,
- const struct probe *probe,
+ const struct bound_probe *probe,
struct frame_info *frame)
{
struct value *arg_value;
struct frame_info *frame)
{
volatile struct gdb_exception e;
- const struct probe *probe;
+ struct bound_probe probe;
struct symbol *func;
/* First see if this exception unwinding breakpoint was set via a
CFA and the HANDLER. We ignore the CFA, extract the handler, and
set a breakpoint there. */
probe = find_probe_by_pc (get_frame_pc (frame));
- if (probe)
+ if (probe.probe)
{
- insert_exception_resume_from_probe (ecs->event_thread, probe, frame);
+ insert_exception_resume_from_probe (ecs->event_thread, &probe, frame);
return;
}
TRY_CATCH (e, RETURN_MASK_ERROR)
{
- struct block *b;
+ const struct block *b;
struct block_iterator iter;
struct symbol *sym;
int argno = 0;
}
static void
-stop_stepping (struct execution_control_state *ecs)
+stop_waiting (struct execution_control_state *ecs)
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_waiting\n");
+
+ clear_step_over_info ();
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
else
{
+ volatile struct gdb_exception e;
+ struct regcache *regcache = get_current_regcache ();
+
/* Either the trap was not expected, but we are continuing
anyway (if we got a signal, the user asked it be passed to
the child)
already inserted breakpoints. Therefore, we don't
care if breakpoints were already inserted, or not. */
- if (ecs->event_thread->stepping_over_breakpoint)
+ /* If we need to step over a breakpoint, and we're not using
+ displaced stepping to do so, insert all breakpoints
+ (watchpoints, etc.) but the one we're stepping over, step one
+ instruction, and then re-insert the breakpoint when that step
+ is finished. */
+ if ((ecs->hit_singlestep_breakpoint
+ || thread_still_needs_step_over (ecs->event_thread))
+ && !use_displaced_stepping (get_regcache_arch (regcache)))
{
- struct regcache *thread_regcache = get_thread_regcache (ecs->ptid);
-
- if (!use_displaced_stepping (get_regcache_arch (thread_regcache)))
- {
- /* Since we can't do a displaced step, we have to remove
- the breakpoint while we step it. To keep things
- simple, we remove them all. */
- remove_breakpoints ();
- }
+ set_step_over_info (get_regcache_aspace (regcache),
+ regcache_read_pc (regcache));
}
else
- {
- volatile struct gdb_exception e;
+ clear_step_over_info ();
- /* Stop stepping if inserting breakpoints fails. */
- TRY_CATCH (e, RETURN_MASK_ERROR)
- {
- insert_breakpoints ();
- }
- if (e.reason < 0)
- {
- exception_print (gdb_stderr, e);
- stop_stepping (ecs);
- return;
- }
+ /* Stop stepping if inserting breakpoints fails. */
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ {
+ insert_breakpoints ();
+ }
+ if (e.reason < 0)
+ {
+ exception_print (gdb_stderr, e);
+ stop_waiting (ecs);
+ return;
}
ecs->event_thread->control.trap_expected
- = ecs->event_thread->stepping_over_breakpoint;
+ = (ecs->event_thread->stepping_over_breakpoint
+ || ecs->hit_singlestep_breakpoint);
/* Do not deliver GDB_SIGNAL_TRAP (except when the user
explicitly specifies that such a signal should be delivered
ecs->wait_some_more = 1;
}
+/* We are done with the step range of a step/next/si/ni command.
+ Called once for each n of a "step n" operation. */
+
+static void
+end_stepping_range (struct execution_control_state *ecs)
+{
+ ecs->event_thread->control.stop_step = 1;
+ stop_waiting (ecs);
+}
+
/* Several print_*_reason functions to print why the inferior has stopped.
We always print something when the inferior exits, or receives a signal.
The rest of the cases are dealt with later on in normal_stop and
print_it_typical. Ideally there should be a call to one of these
print_*_reason functions functions from handle_inferior_event each time
- stop_stepping is called. */
+ stop_waiting is called.
-/* Print why the inferior has stopped.
- We are done with a step/next/si/ni command, print why the inferior has
- stopped. For now print nothing. Print a message only if not in the middle
- of doing a "step n" operation for n > 1. */
+ Note that we don't call these directly, instead we delegate that to
+ the interpreters, through observers. Interpreters then call these
+ with whatever uiout is right. */
-static void
-print_end_stepping_range_reason (void)
+void
+print_end_stepping_range_reason (struct ui_out *uiout)
{
- if ((!inferior_thread ()->step_multi
- || !inferior_thread ()->control.stop_step)
- && ui_out_is_mi_like_p (current_uiout))
- ui_out_field_string (current_uiout, "reason",
- async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
-}
+ /* For CLI-like interpreters, print nothing. */
-/* The inferior was terminated by a signal, print why it stopped. */
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ ui_out_field_string (uiout, "reason",
+ async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
+ }
+}
-static void
-print_signal_exited_reason (enum gdb_signal siggnal)
+void
+print_signal_exited_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
- struct ui_out *uiout = current_uiout;
-
annotate_signalled ();
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
ui_out_text (uiout, "The program no longer exists.\n");
}
-/* The inferior program is finished, print why it stopped. */
-
-static void
-print_exited_reason (int exitstatus)
+void
+print_exited_reason (struct ui_out *uiout, int exitstatus)
{
struct inferior *inf = current_inferior ();
const char *pidstr = target_pid_to_str (pid_to_ptid (inf->pid));
- struct ui_out *uiout = current_uiout;
annotate_exited (exitstatus);
if (exitstatus)
ui_out_text (uiout, pidstr);
ui_out_text (uiout, ") exited normally]\n");
}
- /* Support the --return-child-result option. */
- return_child_result_value = exitstatus;
}
-/* Signal received, print why the inferior has stopped. The signal table
- tells us to print about it. */
-
-static void
-print_signal_received_reason (enum gdb_signal siggnal)
+void
+print_signal_received_reason (struct ui_out *uiout, enum gdb_signal siggnal)
{
- struct ui_out *uiout = current_uiout;
-
annotate_signal ();
if (siggnal == GDB_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
ui_out_text (uiout, ".\n");
}
-/* Reverse execution: target ran out of history info, print why the inferior
- has stopped. */
+void
+print_no_history_reason (struct ui_out *uiout)
+{
+ ui_out_text (uiout, "\nNo more reverse-execution history.\n");
+}
-static void
-print_no_history_reason (void)
+/* Print current location without a level number, if we have changed
+ functions or hit a breakpoint. Print source line if we have one.
+ bpstat_print contains the logic deciding in detail what to print,
+ based on the event(s) that just occurred. */
+
+void
+print_stop_event (struct target_waitstatus *ws)
{
- ui_out_text (current_uiout, "\nNo more reverse-execution history.\n");
+ int bpstat_ret;
+ int source_flag;
+ int do_frame_printing = 1;
+ struct thread_info *tp = inferior_thread ();
+
+ bpstat_ret = bpstat_print (tp->control.stop_bpstat, ws->kind);
+ switch (bpstat_ret)
+ {
+ case PRINT_UNKNOWN:
+ /* FIXME: cagney/2002-12-01: Given that a frame ID does (or
+ should) carry around the function and does (or should) use
+ that when doing a frame comparison. */
+ if (tp->control.stop_step
+ && frame_id_eq (tp->control.step_frame_id,
+ get_frame_id (get_current_frame ()))
+ && step_start_function == find_pc_function (stop_pc))
+ {
+ /* Finished step, just print source line. */
+ source_flag = SRC_LINE;
+ }
+ else
+ {
+ /* Print location and source line. */
+ source_flag = SRC_AND_LOC;
+ }
+ break;
+ case PRINT_SRC_AND_LOC:
+ /* Print location and source line. */
+ source_flag = SRC_AND_LOC;
+ break;
+ case PRINT_SRC_ONLY:
+ source_flag = SRC_LINE;
+ break;
+ case PRINT_NOTHING:
+ /* Something bogus. */
+ source_flag = SRC_LINE;
+ do_frame_printing = 0;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("Unknown value."));
+ }
+
+ /* The behavior of this routine with respect to the source
+ flag is:
+ SRC_LINE: Print only source line
+ LOCATION: Print only location
+ SRC_AND_LOC: Print location and source line. */
+ if (do_frame_printing)
+ print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
+
+ /* Display the auto-display expressions. */
+ do_displays ();
}
/* Here to return control to GDB when the inferior stops for real.
&& last.kind != TARGET_WAITKIND_NO_RESUMED)
make_cleanup (finish_thread_state_cleanup, &inferior_ptid);
- /* In non-stop mode, we don't want GDB to switch threads behind the
- user's back, to avoid races where the user is typing a command to
- apply to thread x, but GDB switches to thread y before the user
- finishes entering the command. */
+ /* As we're presenting a stop, and potentially removing breakpoints,
+ update the thread list so we can tell whether there are threads
+ running on the target. With target remote, for example, we can
+ only learn about new threads when we explicitly update the thread
+ list. Do this before notifying the interpreters about signal
+ stops, end of stepping ranges, etc., so that the "new thread"
+ output is emitted before e.g., "Program received signal FOO",
+ instead of after. */
+ update_thread_list ();
+
+ if (last.kind == TARGET_WAITKIND_STOPPED && stopped_by_random_signal)
+ observer_notify_signal_received (inferior_thread ()->suspend.stop_signal);
/* As with the notification of thread events, we want to delay
notifying the user that we've switched thread context until
There's no point in saying anything if the inferior has exited.
Note that SIGNALLED here means "exited with a signal", not
- "received a signal". */
+ "received a signal".
+
+ Also skip saying anything in non-stop mode. In that mode, as we
+ don't want GDB to switch threads behind the user's back, to avoid
+ races where the user is typing a command to apply to thread x,
+ but GDB switches to thread y before the user finishes entering
+ the command, fetch_inferior_event installs a cleanup to restore
+ the current thread back to the thread the user had selected right
+ after this event is handled, so we're not really switching, only
+ informing of a stop. */
if (!non_stop
&& !ptid_equal (previous_inferior_ptid, inferior_ptid)
&& target_has_execution
printf_filtered (_("No unwaited-for children left.\n"));
}
- if (!breakpoints_always_inserted_mode () && target_has_execution)
+ /* Note: this depends on the update_thread_list call above. */
+ if (!breakpoints_should_be_inserted_now () && target_has_execution)
{
if (remove_breakpoints ())
{
if (stopped_by_random_signal)
disable_current_display ();
- /* Don't print a message if in the middle of doing a "step n"
- operation for n > 1 */
+ /* Notify observers if we finished a "step"-like command, etc. */
if (target_has_execution
&& last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED
- && inferior_thread ()->step_multi
&& inferior_thread ()->control.stop_step)
- goto done;
+ {
+ /* But not if in the middle of doing a "step n" operation for
+ n > 1 */
+ if (inferior_thread ()->step_multi)
+ goto done;
+
+ observer_notify_end_stepping_range ();
+ }
target_terminal_ours ();
async_enable_stdin ();
display the frame below, but the current SAL will be incorrect
during a user hook-stop function. */
if (has_stack_frames () && !stop_stack_dummy)
- set_current_sal_from_frame (get_current_frame (), 1);
-
- /* Let the user/frontend see the threads as stopped. */
- do_cleanups (old_chain);
+ set_current_sal_from_frame (get_current_frame ());
+
+ /* Let the user/frontend see the threads as stopped, but do nothing
+ if the thread was running an infcall. We may be e.g., evaluating
+ a breakpoint condition. In that case, the thread had state
+ THREAD_RUNNING before the infcall, and shall remain set to
+ running, all without informing the user/frontend about state
+ transition changes. If this is actually a call command, then the
+ thread was originally already stopped, so there's no state to
+ finish either. */
+ if (target_has_execution && inferior_thread ()->control.in_infcall)
+ discard_cleanups (old_chain);
+ else
+ do_cleanups (old_chain);
/* Look up the hook_stop and run it (CLI internally handles problem
of stop_command's pre-hook not existing). */
{
select_frame (get_current_frame ());
- /* Print current location without a level number, if
- we have changed functions or hit a breakpoint.
- Print source line if we have one.
- bpstat_print() contains the logic deciding in detail
- what to print, based on the event(s) that just occurred. */
-
/* If --batch-silent is enabled then there's no need to print the current
source location, and to try risks causing an error message about
missing source files. */
if (stop_print_frame && !batch_silent)
- {
- int bpstat_ret;
- int source_flag;
- int do_frame_printing = 1;
- struct thread_info *tp = inferior_thread ();
-
- bpstat_ret = bpstat_print (tp->control.stop_bpstat, last.kind);
- switch (bpstat_ret)
- {
- case PRINT_UNKNOWN:
- /* FIXME: cagney/2002-12-01: Given that a frame ID does
- (or should) carry around the function and does (or
- should) use that when doing a frame comparison. */
- if (tp->control.stop_step
- && frame_id_eq (tp->control.step_frame_id,
- get_frame_id (get_current_frame ()))
- && step_start_function == find_pc_function (stop_pc))
- source_flag = SRC_LINE; /* Finished step, just
- print source line. */
- else
- source_flag = SRC_AND_LOC; /* Print location and
- source line. */
- break;
- case PRINT_SRC_AND_LOC:
- source_flag = SRC_AND_LOC; /* Print location and
- source line. */
- break;
- case PRINT_SRC_ONLY:
- source_flag = SRC_LINE;
- break;
- case PRINT_NOTHING:
- source_flag = SRC_LINE; /* something bogus */
- do_frame_printing = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("Unknown value."));
- }
-
- /* The behavior of this routine with respect to the source
- flag is:
- SRC_LINE: Print only source line
- LOCATION: Print only location
- SRC_AND_LOC: Print location and source line. */
- if (do_frame_printing)
- print_stack_frame (get_selected_frame (NULL), 0, source_flag, 1);
-
- /* Display the auto-display expressions. */
- do_displays ();
- }
+ print_stop_event (&last);
}
/* Save the function value return registers, if we care.
}
}
- inf_state = XZALLOC (struct infcall_suspend_state);
+ inf_state = XCNEW (struct infcall_suspend_state);
if (siginfo_data)
{
xfree (inf_status);
}
\f
-int
-ptid_match (ptid_t ptid, ptid_t filter)
-{
- if (ptid_equal (filter, minus_one_ptid))
- return 1;
- if (ptid_is_pid (filter)
- && ptid_get_pid (ptid) == ptid_get_pid (filter))
- return 1;
- else if (ptid_equal (ptid, filter))
- return 1;
-
- return 0;
-}
-
/* restore_inferior_ptid() will be used by the cleanup machinery
to restore the inferior_ptid value saved in a call to
save_inferior_ptid(). */
return make_cleanup (restore_inferior_ptid, saved_ptid_ptr);
}
-/* See inferior.h. */
+/* See infrun.h. */
void
clear_exit_convenience_vars (void)
signal_catch = (unsigned char *)
xmalloc (sizeof (signal_catch[0]) * numsigs);
signal_pass = (unsigned char *)
- xmalloc (sizeof (signal_program[0]) * numsigs);
+ xmalloc (sizeof (signal_pass[0]) * numsigs);
for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
projects / platform / upstream / binutils.git / blobdiff