#include "defs.h"
#include "arch-utils.h"
#include <signal.h>
-#include <string.h>
#include "symtab.h"
#include "gdbtypes.h"
#include "frame.h"
#include "block.h"
#include "solib.h"
#include <ctype.h>
-#include "gdb_assert.h"
#include "observer.h"
#include "target-descriptions.h"
#include "user-regs.h"
-#include "exceptions.h"
#include "cli/cli-decode.h"
#include "gdbthread.h"
#include "valprint.h"
}
}
-/* Prepare for execution command. TARGET is the target that will run
- the command. BACKGROUND determines whether this is a foreground
- (synchronous) or background (asynchronous) command. */
+/* See inferior.h. */
-static void
+void
prepare_execution_command (struct target_ops *target, int background)
{
/* If we get a request for running in the bg but the target
return 0;
switch_to_thread (thread->ptid);
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
return 0;
}
{
ensure_valid_thread ();
ensure_not_running ();
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
}
}
THREAD is set. */
struct thread_info *tp = inferior_thread ();
- clear_proceed_status ();
+ clear_proceed_status (!skip_subroutines);
set_step_frame ();
if (!single_inst)
printf_filtered (".\n");
}
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed (addr, GDB_SIGNAL_0, 0);
}
\f
oursig = gdb_signal_from_command (num);
}
+ /* Look for threads other than the current that this command ends up
+ resuming too (due to schedlock off), and warn if they'll get a
+ signal delivered. "signal 0" is used to suppress a previous
+ signal, but if the current thread is no longer the one that got
+ the signal, then the user is potentially suppressing the signal
+ of the wrong thread. */
+ if (!non_stop)
+ {
+ struct thread_info *tp;
+ ptid_t resume_ptid;
+ int must_confirm = 0;
+
+ /* This indicates what will be resumed. Either a single thread,
+ a whole process, or all threads of all processes. */
+ resume_ptid = user_visible_resume_ptid (0);
+
+ ALL_NON_EXITED_THREADS (tp)
+ {
+ if (ptid_equal (tp->ptid, inferior_ptid))
+ continue;
+ if (!ptid_match (tp->ptid, resume_ptid))
+ continue;
+
+ if (tp->suspend.stop_signal != GDB_SIGNAL_0
+ && signal_pass_state (tp->suspend.stop_signal))
+ {
+ if (!must_confirm)
+ printf_unfiltered (_("Note:\n"));
+ printf_unfiltered (_(" Thread %d previously stopped with signal %s, %s.\n"),
+ tp->num,
+ gdb_signal_to_name (tp->suspend.stop_signal),
+ gdb_signal_to_string (tp->suspend.stop_signal));
+ must_confirm = 1;
+ }
+ }
+
+ if (must_confirm
+ && !query (_("Continuing thread %d (the current thread) with specified signal will\n"
+ "still deliver the signals noted above to their respective threads.\n"
+ "Continue anyway? "),
+ inferior_thread ()->num))
+ error (_("Not confirmed."));
+ }
+
if (from_tty)
{
if (oursig == GDB_SIGNAL_0)
gdb_signal_to_name (oursig));
}
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed ((CORE_ADDR) -1, oursig, 0);
}
+/* Queue a signal to be delivered to the current thread. */
+
+static void
+queue_signal_command (char *signum_exp, int from_tty)
+{
+ enum gdb_signal oursig;
+ struct thread_info *tp;
+
+ ERROR_NO_INFERIOR;
+ ensure_not_tfind_mode ();
+ ensure_valid_thread ();
+ ensure_not_running ();
+
+ if (signum_exp == NULL)
+ error_no_arg (_("signal number"));
+
+ /* It would be even slicker to make signal names be valid expressions,
+ (the type could be "enum $signal" or some such), then the user could
+ assign them to convenience variables. */
+ oursig = gdb_signal_from_name (signum_exp);
+
+ if (oursig == GDB_SIGNAL_UNKNOWN)
+ {
+ /* No, try numeric. */
+ int num = parse_and_eval_long (signum_exp);
+
+ if (num == 0)
+ oursig = GDB_SIGNAL_0;
+ else
+ oursig = gdb_signal_from_command (num);
+ }
+
+ if (oursig != GDB_SIGNAL_0
+ && !signal_pass_state (oursig))
+ error (_("Signal handling set to not pass this signal to the program."));
+
+ tp = inferior_thread ();
+ tp->suspend.stop_signal = oursig;
+}
+
/* Continuation args to be passed to the "until" command
continuation. */
struct until_next_continuation_args
int thread = tp->num;
struct cleanup *old_chain;
- clear_proceed_status ();
+ clear_proceed_status (0);
set_step_frame ();
frame = get_current_frame ();
error (_("Execution is not within a known function."));
tp->control.step_range_start = BMSYMBOL_VALUE_ADDRESS (msymbol);
- tp->control.step_range_end = pc;
+ /* The upper-bound of step_range is exclusive. In order to make PC
+ within the range, set the step_range_end with PC + 1. */
+ tp->control.step_range_end = pc + 1;
}
else
{
pc = get_frame_pc (get_current_frame ());
if (find_pc_partial_function (pc, NULL, &func_addr, NULL) == 0)
- internal_error (__FILE__, __LINE__,
- _("Finish: couldn't find function."));
+ error (_("Cannot find bounds of current function"));
sal = find_pc_line (func_addr, 0);
if (frame == 0)
error (_("\"finish\" not meaningful in the outermost frame."));
- clear_proceed_status ();
+ clear_proceed_status (0);
/* Finishing from an inline frame is completely different. We don't
try to show the "return value" - no way to locate it. So we do
gdb_signal_to_string (tp->suspend.stop_signal));
}
- if (!from_tty)
+ if (from_tty)
{
printf_filtered (_("Type \"info stack\" or \"info "
"registers\" for more information.\n"));
&& thread->suspend.stop_signal == GDB_SIGNAL_0)
{
switch_to_thread (thread->ptid);
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
}
do_cleanups (old_chain);
}
-/*
- * TODO:
- * Should save/restore the tty state since it might be that the
- * program to be debugged was started on this tty and it wants
- * the tty in some state other than what we want. If it's running
- * on another terminal or without a terminal, then saving and
- * restoring the tty state is a harmless no-op.
- * This only needs to be done if we are attaching to a process.
- */
-
/* attach_command --
takes a program started up outside of gdb and ``attaches'' to it.
This stops it cold in its tracks and allows us to start debugging it.
post_create_inferior (¤t_target, from_tty);
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
if (async_exec)
{
/* The user requested an `attach&', so be sure to leave threads
{
if (inferior_thread ()->suspend.stop_signal == GDB_SIGNAL_0)
{
- clear_proceed_status ();
+ clear_proceed_status (0);
proceed ((CORE_ADDR) -1, GDB_SIGNAL_DEFAULT, 0);
}
}
based on what modes we are starting it with. */
target_terminal_init ();
+ /* Install inferior's terminal modes. This may look like a no-op,
+ as we've just saved them above, however, this does more than
+ restore terminal settings:
+
+ - installs a SIGINT handler that forwards SIGINT to the inferior.
+ Otherwise a Ctrl-C pressed just while waiting for the initial
+ stop would end up as a spurious Quit.
+
+ - removes stdin from the event loop, which we need if attaching
+ in the foreground, otherwise on targets that report an initial
+ stop on attach (which are most) we'd process input/commands
+ while we're in the event loop waiting for that stop. That is,
+ before the attach continuation runs and the command is really
+ finished. */
+ target_terminal_inferior ();
+
/* Set up execution context to know that we should return from
wait_for_inferior as soon as the target reports a stop. */
init_wait_for_inferior ();
- clear_proceed_status ();
+ clear_proceed_status (0);
if (non_stop)
{
{
printf_filtered (_("\"unset\" must be followed by the "
"name of an unset subcommand.\n"));
- help_list (unsetlist, "unset ", -1, gdb_stdout);
+ help_list (unsetlist, "unset ", all_commands, gdb_stdout);
}
/* Implement `info proc' family of commands. */
\n\
An argument of \"0\" means continue the program without sending it a signal.\n\
This is useful in cases where the program stopped because of a signal,\n\
-and you want to resume the program while discarding the signal."));
+and you want to resume the program while discarding the signal.\n\
+\n\
+In a multi-threaded program the signal is delivered to, or discarded from,\n\
+the current thread only."));
+ set_cmd_completer (c, signal_completer);
+
+ c = add_com ("queue-signal", class_run, queue_signal_command, _("\
+Queue a signal to be delivered to the current thread when it is resumed.\n\
+Usage: queue-signal SIGNAL\n\
+The SIGNAL argument is processed the same as the handle command.\n\
+It is an error if the handling state of SIGNAL is \"nopass\".\n\
+\n\
+An argument of \"0\" means remove any currently queued signal from\n\
+the current thread. This is useful in cases where the program stopped\n\
+because of a signal, and you want to resume it while discarding the signal.\n\
+\n\
+In a multi-threaded program the signal is queued with, or discarded from,\n\
+the current thread only."));
set_cmd_completer (c, signal_completer);
add_com ("stepi", class_run, stepi_command, _("\
projects / platform / upstream / binutils.git / blobdiff