f:int:register_to_value:struct frame_info *frame, int regnum, struct type *type, gdb_byte *buf, int *optimizedp, int *unavailablep:frame, regnum, type, buf, optimizedp, unavailablep:0
f:void:value_to_register:struct frame_info *frame, int regnum, struct type *type, const gdb_byte *buf:frame, regnum, type, buf:0
# Construct a value representing the contents of register REGNUM in
-# frame FRAME, interpreted as type TYPE. The routine needs to
+# frame FRAME_ID, interpreted as type TYPE. The routine needs to
# allocate and return a struct value with all value attributes
# (but not the value contents) filled in.
-f:struct value *:value_from_register:struct type *type, int regnum, struct frame_info *frame:type, regnum, frame::default_value_from_register::0
+m:struct value *:value_from_register:struct type *type, int regnum, struct frame_id frame_id:type, regnum, frame_id::default_value_from_register::0
#
m:CORE_ADDR:pointer_to_address:struct type *type, const gdb_byte *buf:type, buf::unsigned_pointer_to_address::0
m:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
+# On some platforms, a single function may provide multiple entry points,
+# e.g. one that is used for function-pointer calls and a different one
+# that is used for direct function calls.
+# In order to ensure that breakpoints set on the function will trigger
+# no matter via which entry point the function is entered, a platform
+# may provide the skip_entrypoint callback. It is called with IP set
+# to the main entry point of a function (as determined by the symbol table),
+# and should return the address of the innermost entry point, where the
+# actual breakpoint needs to be set. Note that skip_entrypoint is used
+# by GDB common code even when debugging optimized code, where skip_prologue
+# is not used.
+M:CORE_ADDR:skip_entrypoint:CORE_ADDR ip:ip
+
f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
# Return the adjusted address and kind to use for Z0/Z1 packets.
v:int:have_nonsteppable_watchpoint:::0:0::0
F:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
M:const char *:address_class_type_flags_to_name:int type_flags:type_flags
+
+# Return the appropriate type_flags for the supplied address class.
+# This function should return 1 if the address class was recognized and
+# type_flags was set, zero otherwise.
M:int:address_class_name_to_type_flags:const char *name, int *type_flags_ptr:name, type_flags_ptr
# Is a register in a group
m:int:register_reggroup_p:int regnum, struct reggroup *reggroup:regnum, reggroup::default_register_reggroup_p::0
# Fetch the pointer to the ith function argument.
F:CORE_ADDR:fetch_pointer_argument:struct frame_info *frame, int argi, struct type *type:frame, argi, type
-# Return the appropriate register set for a core file section with
-# name SECT_NAME and size SECT_SIZE.
-M:const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
-
-# Supported register notes in a core file.
-v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+# Iterate over all supported register notes in a core file. For each
+# supported register note section, the iterator must call CB and pass
+# CB_DATA unchanged. If REGCACHE is not NULL, the iterator can limit
+# the supported register note sections based on the current register
+# values. Otherwise it should enumerate all supported register note
+# sections.
+M:void:iterate_over_regset_sections:iterate_over_regset_sections_cb *cb, void *cb_data, const struct regcache *regcache:cb, cb_data, regcache
# Create core file notes
M:char *:make_corefile_notes:bfd *obfd, int *note_size:obfd, note_size
M:int:find_memory_regions:find_memory_region_ftype func, void *data:func, data
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
-# core file into buffer READBUF with length LEN.
-M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+# core file into buffer READBUF with length LEN. Return the number of bytes read
+# (zero indicates failure).
+# failed, otherwise, return the red length of READBUF.
+M:ULONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, ULONGEST len:readbuf, offset, len
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES_AIX formatted shared
# libraries list from core file into buffer READBUF with length LEN.
-M:LONGEST:core_xfer_shared_libraries_aix:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+# Return the number of bytes read (zero indicates failure).
+M:ULONGEST:core_xfer_shared_libraries_aix:gdb_byte *readbuf, ULONGEST offset, ULONGEST len:readbuf, offset, len
# How the core target converts a PTID from a core file to a string.
M:char *:core_pid_to_str:ptid_t ptid:ptid
m:void:gen_return_address:struct agent_expr *ax, struct axs_value *value, CORE_ADDR scope:ax, value, scope::default_gen_return_address::0
# Implement the "info proc" command.
-M:void:info_proc:char *args, enum info_proc_what what:args, what
+M:void:info_proc:const char *args, enum info_proc_what what:args, what
# Implement the "info proc" command for core files. Noe that there
# are two "info_proc"-like methods on gdbarch -- one for core files,
# one for live targets.
-M:void:core_info_proc:char *args, enum info_proc_what what:args, what
+M:void:core_info_proc:const char *args, enum info_proc_what what:args, what
# Iterate over all objfiles in the order that makes the most sense
# for the architecture to make global symbol searches.
# Ravenscar arch-dependent ops.
v:struct ravenscar_arch_ops *:ravenscar_ops:::NULL:NULL::0:host_address_to_string (gdbarch->ravenscar_ops)
+
+# Return non-zero if the instruction at ADDR is a call; zero otherwise.
+m:int:insn_is_call:CORE_ADDR addr:addr::default_insn_is_call::0
+
+# Return non-zero if the instruction at ADDR is a return; zero otherwise.
+m:int:insn_is_ret:CORE_ADDR addr:addr::default_insn_is_ret::0
+
+# Return non-zero if the instruction at ADDR is a jump; zero otherwise.
+m:int:insn_is_jump:CORE_ADDR addr:addr::default_insn_is_jump::0
+
+# Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
+# Return 0 if *READPTR is already at the end of the buffer.
+# Return -1 if there is insufficient buffer for a whole entry.
+# Return 1 if an entry was read into *TYPEP and *VALP.
+M:int:auxv_parse:gdb_byte **readptr, gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp:readptr, endptr, typep, valp
+
+# Find the address range of the current inferior's vsyscall/vDSO, and
+# write it to *RANGE. If the vsyscall's length can't be determined, a
+# range with zero length is returned. Returns true if the vsyscall is
+# found, false otherwise.
+m:int:vsyscall_range:struct mem_range *range:range::default_vsyscall_range::0
EOF
}
#ifndef GDBARCH_H
#define GDBARCH_H
+#include "frame.h"
+
struct floatformat;
struct ui_file;
-struct frame_info;
struct value;
struct objfile;
struct obj_section;
struct stap_parse_info;
struct ravenscar_arch_ops;
struct elf_internal_linux_prpsinfo;
+struct mem_range;
/* The architecture associated with the inferior through the
connection to the target.
/* This is a convenience wrapper for 'current_inferior ()->gdbarch'. */
extern struct gdbarch *target_gdbarch (void);
-/* The initial, default architecture. It uses host values (for want of a better
- choice). */
-extern struct gdbarch startup_gdbarch;
-
-
/* Callback type for the 'iterate_over_objfiles_in_search_order'
gdbarch method. */
typedef int (iterate_over_objfiles_in_search_order_cb_ftype)
(struct objfile *objfile, void *cb_data);
+
+typedef void (iterate_over_regset_sections_cb)
+ (const char *sect_name, int size, const struct regset *regset,
+ const char *human_name, void *cb_data);
EOF
# function typedef's
#include "symcat.h"
#include "floatformat.h"
-
-#include "gdb_assert.h"
-#include <string.h>
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
gdbarch_dump(): Add a fprintf_unfiltered call so that the new
field is dumped out
- \`\`startup_gdbarch()'': Append an initial value to the static
- variable (base values on the host's c-type system).
-
get_gdbarch(): Implement the set/get functions (probably using
the macro's as shortcuts).
done
printf "};\n"
-# A pre-initialized vector
-printf "\n"
-printf "\n"
-cat <<EOF
-/* The default architecture uses host values (for want of a better
- choice). */
-EOF
-printf "\n"
-printf "extern const struct bfd_arch_info bfd_default_arch_struct;\n"
-printf "\n"
-printf "struct gdbarch startup_gdbarch =\n"
-printf "{\n"
-printf " 1, /* Always initialized. */\n"
-printf " NULL, /* The obstack. */\n"
-printf " /* basic architecture information. */\n"
-function_list | while do_read
-do
- if class_is_info_p
- then
- printf " ${staticdefault}, /* ${function} */\n"
- fi
-done
-cat <<EOF
- /* target specific vector and its dump routine. */
- NULL, NULL,
- /*per-architecture data-pointers. */
- 0, NULL,
- /* Multi-arch values */
-EOF
-function_list | while do_read
-do
- if class_is_function_p || class_is_variable_p
- then
- printf " ${staticdefault}, /* ${function} */\n"
- fi
-done
-cat <<EOF
- /* startup_gdbarch() */
-};
-
-EOF
-
# Create a new gdbarch struct
cat <<EOF
/* Create an obstack for allocating all the per-architecture memory,
then use that to allocate the architecture vector. */
- struct obstack *obstack = XMALLOC (struct obstack);
+ struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
gdbarch = obstack_alloc (obstack, sizeof (*gdbarch));
memset (gdbarch, 0, sizeof (*gdbarch));
for (curr = &gdbarch_data_registry.registrations;
(*curr) != NULL;
curr = &(*curr)->next);
- (*curr) = XMALLOC (struct gdbarch_data_registration);
+ (*curr) = XNEW (struct gdbarch_data_registration);
(*curr)->next = NULL;
- (*curr)->data = XMALLOC (struct gdbarch_data);
+ (*curr)->data = XNEW (struct gdbarch_data);
(*curr)->data->index = gdbarch_data_registry.nr++;
(*curr)->data->pre_init = pre_init;
(*curr)->data->post_init = post_init;
bfd_arch_info->printable_name,
host_address_to_string (init));
/* Append it */
- (*curr) = XMALLOC (struct gdbarch_registration);
+ (*curr) = XNEW (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
(*curr)->init = init;
(*curr)->dump_tdep = dump_tdep;
/* Insert the new architecture into the front of the architecture
list (keep the list sorted Most Recently Used). */
{
- struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
+ struct gdbarch_list *this = XNEW (struct gdbarch_list);
this->next = rego->arches;
this->gdbarch = new_gdbarch;
rego->arches = this;
projects / platform / upstream / binutils.git / blobdiff