/* readline defines this. */
#undef savestring
-static void command_line_handler (char *rl);
-static void change_line_handler (void);
static char *top_level_prompt (void);
/* Signal handlers. */
ezannoni: as of 1999-04-29 I expect that this
variable will not be used after gdb is changed to use the event
loop as default engine, and event-top.c is merged into top.c. */
-int async_command_editing_p;
+int set_editing_cmd_var;
/* This is used to display the notification of the completion of an
asynchronous execution command. */
throw_exception_sjlj (gdb_rl_expt);
}
-/* Initialize all the necessary variables, start the event loop,
- register readline, and stdin, start the loop. The DATA is the
- interpreter data cookie, ignored for now. */
-
-void
-cli_command_loop (void *data)
-{
- display_gdb_prompt (0);
-
- /* Now it's time to start the event loop. */
- start_event_loop ();
-}
-
/* Change the function to be invoked every time there is a character
ready on stdin. This is used when the user sets the editing off,
therefore bypassing readline, and letting gdb handle the input
itself, via gdb_readline_no_editing_callback. Also it is used in
the opposite case in which the user sets editing on again, by
- restoring readline handling of the input. */
-static void
-change_line_handler (void)
+ restoring readline handling of the input.
+
+ NOTE: this operates on input_fd, not instream. If we are reading
+ commands from a file, instream will point to the file. However, we
+ always read commands from a file with editing off. This means that
+ the 'set editing on/off' will have effect only on the interactive
+ session. */
+
+void
+change_line_handler (int editing)
{
struct ui *ui = current_ui;
- /* NOTE: this operates on input_fd, not instream. If we are reading
- commands from a file, instream will point to the file. However in
- async mode, we always read commands from a file with editing
- off. This means that the 'set editing on/off' will have effect
- only on the interactive session. */
+ /* We can only have one instance of readline, so we only allow
+ editing on the main UI. */
+ if (ui != main_ui)
+ return;
- if (async_command_editing_p)
+ /* Don't try enabling editing if the interpreter doesn't support it
+ (e.g., MI). */
+ if (!interp_supports_command_editing (top_level_interpreter ())
+ || !interp_supports_command_editing (command_interp ()))
+ return;
+
+ if (editing)
{
+ gdb_assert (ui == main_ui);
+
/* Turn on editing by using readline. */
ui->call_readline = gdb_rl_callback_read_char_wrapper;
- ui->input_handler = command_line_handler;
}
else
{
/* Turn off editing by using gdb_readline_no_editing_callback. */
- gdb_rl_callback_handler_remove ();
+ if (ui->command_editing)
+ gdb_rl_callback_handler_remove ();
ui->call_readline = gdb_readline_no_editing_callback;
-
- /* Set up the command handler as well, in case we are called as
- first thing from .gdbinit. */
- ui->input_handler = command_line_handler;
}
+ ui->command_editing = editing;
}
/* The functions below are wrappers for rl_callback_handler_remove and
void
gdb_rl_callback_handler_remove (void)
{
+ gdb_assert (current_ui == main_ui);
+
rl_callback_handler_remove ();
callback_handler_installed = 0;
}
void
gdb_rl_callback_handler_install (const char *prompt)
{
+ gdb_assert (current_ui == main_ui);
+
/* Calling rl_callback_handler_install resets readline's input
buffer. Calling this when we were already processing input
therefore loses input. */
void
gdb_rl_callback_handler_reinstall (void)
{
+ gdb_assert (current_ui == main_ui);
+
if (!callback_handler_installed)
{
/* Passing NULL as prompt argument tells readline to not display
IE, displayed but not set. */
if (! new_prompt)
{
- if (sync_execution)
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPTED)
+ internal_error (__FILE__, __LINE__, _("double prompt"));
+ else if (ui->prompt_state == PROMPT_BLOCKED)
{
/* This is to trick readline into not trying to display the
prompt. Even though we display the prompt using this
the above two functions. Calling
rl_callback_handler_remove(), does the job. */
- gdb_rl_callback_handler_remove ();
+ if (current_ui->command_editing)
+ gdb_rl_callback_handler_remove ();
do_cleanups (old_chain);
return;
}
- else
+ else if (ui->prompt_state == PROMPT_NEEDED)
{
/* Display the top level prompt. */
actual_gdb_prompt = top_level_prompt ();
+ ui->prompt_state = PROMPTED;
}
}
else
actual_gdb_prompt = xstrdup (new_prompt);
- if (async_command_editing_p)
+ if (current_ui->command_editing)
{
gdb_rl_callback_handler_remove ();
gdb_rl_callback_handler_install (actual_gdb_prompt);
return xstrdup (prompt);
}
-/* The main UI. */
-static struct ui main_ui_;
+/* See top.h. */
-struct ui *main_ui = &main_ui_;
-struct ui *current_ui = &main_ui_;
-struct ui *ui_list = &main_ui_;
+struct ui *main_ui;
+struct ui *current_ui;
+struct ui *ui_list;
-/* Cleanup that restores the current UI. */
+/* See top.h. */
-static void
+void
restore_ui_cleanup (void *data)
{
current_ui = (struct ui *) data;
{
struct ui *ui = (struct ui *) client_data;
- /* Switch to the UI whose input descriptor woke up the event
- loop. */
- current_ui = ui;
-
if (error)
{
- printf_unfiltered (_("error detected on stdin\n"));
+ /* Switch to the main UI, so diagnostics always go there. */
+ current_ui = main_ui;
+
delete_file_handler (ui->input_fd);
- /* If stdin died, we may as well kill gdb. */
- quit_command ((char *) 0, stdin == ui->instream);
+ if (main_ui == ui)
+ {
+ /* If stdin died, we may as well kill gdb. */
+ printf_unfiltered (_("error detected on stdin\n"));
+ quit_command ((char *) 0, 0);
+ }
+ else
+ {
+ /* Simply delete the UI. */
+ delete_ui (ui);
+ }
}
else
{
- /* This makes sure a ^C immediately followed by further input is
- always processed in that order. E.g,. with input like
- "^Cprint 1\n", the SIGINT handler runs, marks the async signal
- handler, and then select/poll may return with stdin ready,
- instead of -1/EINTR. The
- gdb.base/double-prompt-target-event-error.exp test exercises
- this. */
+ /* Switch to the UI whose input descriptor woke up the event
+ loop. */
+ current_ui = ui;
+
+ /* This makes sure a ^C immediately followed by further input is
+ always processed in that order. E.g,. with input like
+ "^Cprint 1\n", the SIGINT handler runs, marks the async
+ signal handler, and then select/poll may return with stdin
+ ready, instead of -1/EINTR. The
+ gdb.base/double-prompt-target-event-error.exp test exercises
+ this. */
QUIT;
do
{
call_stdin_event_handler_again_p = 0;
ui->call_readline (client_data);
- } while (call_stdin_event_handler_again_p != 0);
+ }
+ while (call_stdin_event_handler_again_p != 0);
}
}
+/* See top.h. */
+
+void
+ui_register_input_event_handler (struct ui *ui)
+{
+ add_file_handler (ui->input_fd, stdin_event_handler, ui);
+}
+
+/* See top.h. */
+
+void
+ui_unregister_input_event_handler (struct ui *ui)
+{
+ delete_file_handler (ui->input_fd);
+}
+
/* Re-enable stdin after the end of an execution command in
synchronous mode, or after an error from the target, and we aborted
the exec operation. */
void
async_enable_stdin (void)
{
- if (sync_execution)
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPT_BLOCKED)
{
- /* See NOTE in async_disable_stdin(). */
- /* FIXME: cagney/1999-09-27: Call this before clearing
- sync_execution. Current target_terminal_ours() implementations
- check for sync_execution before switching the terminal. */
target_terminal_ours ();
- sync_execution = 0;
+ ui_register_input_event_handler (ui);
+ ui->prompt_state = PROMPT_NEEDED;
}
}
void
async_disable_stdin (void)
{
- sync_execution = 1;
+ struct ui *ui = current_ui;
+
+ ui->prompt_state = PROMPT_BLOCKED;
+ delete_file_handler (ui->input_fd);
}
\f
struct cleanup *stat_chain;
char *c;
- if (ui->instream == stdin)
+ if (ui->instream == ui->stdin_stream)
reinitialize_more_filter ();
stat_chain = make_command_stats_cleanup (1);
;
if (c[0] != '#')
{
- execute_command (command, ui->instream == stdin);
+ execute_command (command, ui->instream == ui->stdin_stream);
/* Do any commands attached to breakpoint we stopped at. */
bpstat_do_actions ();
char *rl, int repeat, char *annotation_suffix)
{
struct ui *ui = current_ui;
+ int from_tty = ui->instream == ui->stdin_stream;
char *p1;
char *cmd;
command, but leave ownership of memory to the buffer . */
cmd_line_buffer->used_size = 0;
- if (annotation_level > 1 && ui->instream == stdin)
+ if (from_tty && annotation_level > 1)
{
printf_unfiltered (("\n\032\032post-"));
puts_unfiltered (annotation_suffix);
}
/* Do history expansion if that is wished. */
- if (history_expansion_p && ui->instream == stdin
- && ISATTY (ui->instream))
+ if (history_expansion_p && from_tty && input_interactive_p (current_ui))
{
char *history_value;
int expanded;
and then later fetch it from the value history and remove the
'#'. The kill ring is probably better, but some people are in
the habit of commenting things out. */
- if (*cmd != '\0' && input_from_terminal_p ())
+ if (*cmd != '\0' && from_tty && input_interactive_p (current_ui))
gdb_add_history (cmd);
/* Save into global buffer if appropriate. */
struct ui *ui = current_ui;
char *cmd;
- cmd = handle_line_of_input (line_buffer, rl, ui->instream == stdin,
- "prompt");
+ cmd = handle_line_of_input (line_buffer, rl, 1, "prompt");
if (cmd == (char *) EOF)
{
/* stdin closed. The connection with the terminal is gone.
hung up but GDB is still alive. In such a case, we just quit
gdb killing the inferior program too. */
printf_unfiltered ("quit\n");
- execute_command ("quit", stdin == ui->instream);
+ execute_command ("quit", 1);
}
else if (cmd == NULL)
{
}
else
{
+ ui->prompt_state = PROMPT_NEEDED;
+
command_handler (cmd);
- display_gdb_prompt (0);
+
+ if (ui->prompt_state != PROMPTED)
+ display_gdb_prompt (0);
}
}
{
/* Read from stdin if we are executing a user defined command.
This is the right thing for prompt_for_continue, at least. */
- c = fgetc (ui->instream ? ui->instream : stdin);
+ c = fgetc (ui->instream != NULL ? ui->instream : ui->stdin_stream);
if (c == EOF)
{
static void
async_sigterm_handler (gdb_client_data arg)
{
- quit_force (NULL, stdin == current_ui->instream);
+ quit_force (NULL, 0);
}
/* See defs.h. */
}
\f
-/* Called by do_setshow_command. */
-void
-set_async_editing_command (char *args, int from_tty,
- struct cmd_list_element *c)
-{
- change_line_handler ();
-}
-
/* Set things up for readline to be invoked via the alternate
interface, i.e. via a callback function
(gdb_rl_callback_read_char), and hook up instream to the event
loop. */
void
-gdb_setup_readline (void)
+gdb_setup_readline (int editing)
{
struct ui *ui = current_ui;
mess it up here. The sync stuff should really go away over
time. */
if (!batch_silent)
- gdb_stdout = stdio_fileopen (stdout);
- gdb_stderr = stderr_fileopen ();
+ gdb_stdout = stdio_fileopen (ui->outstream);
+ gdb_stderr = stderr_fileopen (ui->errstream);
gdb_stdlog = gdb_stderr; /* for moment */
gdb_stdtarg = gdb_stderr; /* for moment */
gdb_stdtargerr = gdb_stderr; /* for moment */
- /* If the input stream is connected to a terminal, turn on
- editing. */
- if (ISATTY (ui->instream))
+ /* If the input stream is connected to a terminal, turn on editing.
+ However, that is only allowed on the main UI, as we can only have
+ one instance of readline. */
+ if (ISATTY (ui->instream) && editing && ui == main_ui)
{
/* Tell gdb that we will be using the readline library. This
could be overwritten by a command in .gdbinit like 'set
editing on' or 'off'. */
- async_command_editing_p = 1;
-
+ ui->command_editing = 1;
+
/* When a character is detected on instream by select or poll,
readline will be invoked via this callback function. */
ui->call_readline = gdb_rl_callback_read_char_wrapper;
+
+ /* Tell readline to use the same input stream that gdb uses. */
+ rl_instream = ui->instream;
}
else
{
- async_command_editing_p = 0;
+ ui->command_editing = 0;
ui->call_readline = gdb_readline_no_editing_callback;
}
-
- /* When readline has read an end-of-line character, it passes the
- complete line to gdb for processing; command_line_handler is the
- function that does this. */
- ui->input_handler = command_line_handler;
-
- /* Tell readline to use the same input stream that gdb uses. */
- rl_instream = ui->instream;
/* Now create the event source for this UI's input file descriptor.
Another source is going to be the target program (inferior), but
that must be registered only when it actually exists (I.e. after
we say 'run' or after we connect to a remote target. */
- add_file_handler (ui->input_fd, stdin_event_handler, ui);
+ ui_register_input_event_handler (ui);
}
/* Disable command input through the standard CLI channels. Used in
the suspend proc for interpreters that use the standard gdb readline
interface, like the cli & the mi. */
+
void
gdb_disable_readline (void)
{
gdb_stdtargerr = NULL;
#endif
- gdb_rl_callback_handler_remove ();
+ if (ui->command_editing)
+ gdb_rl_callback_handler_remove ();
delete_file_handler (ui->input_fd);
}
projects / external / binutils.git / blobdiff