#include "arm-tdep.h"
-/* For arm_linux_skip_solib_resolver. */
+/* For shared library handling. */
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
-/* Under ARM Linux the traditional way of performing a breakpoint is to
- execute a particular software interrupt, rather than use a particular
- undefined instruction to provoke a trap. Upon exection of the software
- interrupt the kernel stops the inferior with a SIGTRAP, and wakes the
- debugger. Since ARM Linux is little endian, and doesn't support Thumb
- at the moment we only override the ARM little-endian breakpoint. */
+/* Under ARM GNU/Linux the traditional way of performing a breakpoint
+ is to execute a particular software interrupt, rather than use a
+ particular undefined instruction to provoke a trap. Upon exection
+ of the software interrupt the kernel stops the inferior with a
+ SIGTRAP, and wakes the debugger. Since ARM GNU/Linux is little
+ endian, and doesn't support Thumb at the moment we only override
+ the ARM little-endian breakpoint. */
static const char arm_linux_arm_le_breakpoint[] = {0x01,0x00,0x9f,0xef};
0xe1a0e00f, 0xe1a0f004, 0xef9f001
};
-#ifdef GET_LONGJMP_TARGET
-
-/* Figure out where the longjmp will land. We expect that we have
- just entered longjmp and haven't yet altered r0, r1, so the
- arguments are still in the registers. (ARM_A1_REGNUM) points at
- the jmp_buf structure from which we extract the pc (JB_PC) that we
- will land at. The pc is copied into ADDR. This routine returns
- true on success. */
-
-#define LONGJMP_TARGET_SIZE sizeof(int)
-#define JB_ELEMENT_SIZE sizeof(int)
-#define JB_SL 18
-#define JB_FP 19
-#define JB_SP 20
-#define JB_PC 21
-
-int
-arm_get_longjmp_target (CORE_ADDR * pc)
-{
- CORE_ADDR jb_addr;
- char buf[LONGJMP_TARGET_SIZE];
-
- jb_addr = read_register (ARM_A1_REGNUM);
-
- if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
- LONGJMP_TARGET_SIZE))
- return 0;
-
- *pc = extract_address (buf, LONGJMP_TARGET_SIZE);
- return 1;
-}
-
-#endif /* GET_LONGJMP_TARGET */
+/* Description of the longjmp buffer. */
+#define ARM_LINUX_JB_ELEMENT_SIZE INT_REGISTER_RAW_SIZE
+#define ARM_LINUX_JB_PC 21
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. */
-
-void
+/* FIXME rearnsha/2002-02-23: This function shouldn't be necessary.
+ The ARM generic one should be able to handle the model used by
+ linux and the low-level formatting of the registers should be
+ hidden behind the regcache abstraction. */
+static void
arm_linux_extract_return_value (struct type *type,
char regbuf[REGISTER_BYTES],
char *valbuf)
{
/* ScottB: This needs to be looked at to handle the different
- floating point emulators on ARM Linux. Right now the code
+ floating point emulators on ARM GNU/Linux. Right now the code
assumes that fetch inferior registers does the right thing for
GDB. I suspect this won't handle NWFPE registers correctly, nor
will the default ARM version (arm_extract_return_value()). */
#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
-CORE_ADDR
+static CORE_ADDR
arm_linux_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
}
/*
- Dynamic Linking on ARM Linux
- ----------------------------
+ Dynamic Linking on ARM GNU/Linux
+ --------------------------------
Note: PLT = procedure linkage table
GOT = global offset table
When the executable or library is first loaded, each GOT entry is
initialized to point to the code which implements dynamic name
resolution and code finding. This is normally a function in the
- program interpreter (on ARM Linux this is usually ld-linux.so.2,
- but it does not have to be). On the first invocation, the function
- is located and the GOT entry is replaced with the real function
- address. Subsequent calls go through steps 1, 2 and 3 and end up
- calling the real code.
+ program interpreter (on ARM GNU/Linux this is usually
+ ld-linux.so.2, but it does not have to be). On the first
+ invocation, the function is located and the GOT entry is replaced
+ with the real function address. Subsequent calls go through steps
+ 1, 2 and 3 and end up calling the real code.
1) In the code:
ALL_OBJFILE_MSYMBOLS (objfile, msym)
{
if (SYMBOL_NAME (msym)
- && STREQ (SYMBOL_NAME (msym), name))
+ && strcmp (SYMBOL_NAME (msym), name) == 0)
{
*objfile_p = objfile;
return msym;
It's kind of gross to do all these checks every time we're
called, since they don't change once the executable has gotten
started. But this is only a temporary hack --- upcoming versions
- of Linux will provide a portable, efficient interface for
+ of GNU/Linux will provide a portable, efficient interface for
debugging programs that use shared libraries. */
struct objfile *objfile;
inst = read_memory_integer (pc, 4);
- if (inst == ARM_LINUX_SIGRETURN_INSTR || inst == ARM_LINUX_RT_SIGRETURN_INSTR)
+ if (inst == ARM_LINUX_SIGRETURN_INSTR
+ || inst == ARM_LINUX_RT_SIGRETURN_INSTR)
{
CORE_ADDR sigcontext_addr;
tdep->lowest_pc = 0x8000;
tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint);
+
+ tdep->jb_pc = ARM_LINUX_JB_PC;
+ tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE;
+
+ set_gdbarch_call_dummy_words (gdbarch, arm_linux_call_dummy_words);
+ set_gdbarch_sizeof_call_dummy_words (gdbarch,
+ sizeof (arm_linux_call_dummy_words));
+
+ /* The following two overrides shouldn't be needed. */
+ set_gdbarch_deprecated_extract_return_value (gdbarch, arm_linux_extract_return_value);
+ set_gdbarch_push_arguments (gdbarch, arm_linux_push_arguments);
+
+ /* Shared library handling. */
+ set_gdbarch_in_solib_call_trampoline (gdbarch, in_plt_section);
+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
}
void
_initialize_arm_linux_tdep (void)
{
- arm_gdbarch_register_os_abi (ARM_ABI_LINUX, arm_linux_init_abi);
+ gdbarch_register_osabi (bfd_arch_arm, GDB_OSABI_LINUX, arm_linux_init_abi);
}