-# Copyright (C) 1989-2015 Free Software Foundation, Inc.
+# Copyright (C) 1989-2016 Free Software Foundation, Inc.
# This file is part of GDB.
# The name of the compiler to use.
COMPILER = @COMPILER@
+# Set to CFLAGS or CXXFLAGS, depending on compiler/language.
+COMPILER_CFLAGS = @COMPILER_CFLAGS@
# If you are compiling with GCC, make sure that either 1) You have the
# fixed include files where GCC can reach them, or 2) You use the
# available.
LIBBABELTRACE = @LIBBABELTRACE@
+# Where is libipt? This will be empty if libipt was not available.
+LIBIPT = @LIBIPT@
+
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
INTL_DEPS = @LIBINTL_DEP@
INTL_CFLAGS = @INCINTL@
+# Where is the ICONV library? This will be empty if in libc or not available.
+LIBICONV = @LIBICONV@
+
# Did the user give us a --with-gdb-datadir option?
GDB_DATADIR = @GDB_DATADIR@
PROFILE_CFLAGS = @PROFILE_CFLAGS@
-# CFLAGS is specifically reserved for setting from the command line
-# when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
+# These are specifically reserved for setting from the command line
+# when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
CFLAGS = @CFLAGS@
+CXXFLAGS = @CXXFLAGS@
# Set by configure, for e.g. expat. Python installations are such that
# C headers are included using their basename (for example, we #include
# a bit the consequences by putting the Python includes last in the list.
INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
-# Need to pass this to testsuite for "make check". Probably should be
-# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
-# so "make check" has the same result no matter where it is run.
-CXXFLAGS = -g -O
-
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS_BASE = \
- $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
+ $(COMPILER_CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
$(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
-INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
+INTERNAL_LDFLAGS = \
+ $(COMPILER_CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
+ $(LDFLAGS) $(CONFIG_LDFLAGS)
# If your system is missing alloca(), or, more likely, it's there but
# it doesn't work, then refer to libiberty.
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
- $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
+ $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
+ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
# All target-dependent objects files that require 64-bit CORE_ADDR
# (used with --enable-targets=all --enable-64-bit-bfd).
ALL_64_TARGET_OBS = \
- aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
+ aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o aarch64-insn.o \
alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
- armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
+ armbsd-tdep.o arm.o arm-linux.o arm-linux-tdep.o \
+ arm-get-next-pcs.o arm-symbian-tdep.o \
armnbsd-tdep.o armobsd-tdep.o \
arm-tdep.o arm-wince-tdep.o \
avr-tdep.o \
sol2-tdep.o \
solib-frv.o solib-svr4.o \
solib-darwin.o solib-dsbt.o \
- dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
- remote-m32r-sdi.o remote-mips.o \
xcoffread.o \
symfile-mem.o \
windows-tdep.o \
charset.c common/cleanups.c cli-out.c coffread.c coff-pe-read.c \
complaints.c completer.c continuations.c corefile.c corelow.c \
cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
- d-exp.y d-lang.c d-valprint.c \
+ d-exp.y d-lang.c d-namespace.c d-valprint.c \
cp-name-parser.y \
dbxread.c demangle.c dictionary.c disasm.c doublest.c \
dtrace-probe.c dummy-frame.c \
inline-frame.c \
interps.c \
jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
- language.c linespec.c minidebug.c \
+ language.c linespec.c location.c minidebug.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
memrange.c mi/mi-common.c \
+ namespace.c \
objc-lang.c \
objfiles.c osabi.c observer.c osdata.c \
opencl-lang.c \
proc-service.list progspace.c \
prologue-value.c psymtab.c \
regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
- sentinel-frame.c \
- serial.c ser-base.c ser-unix.c skip.c \
+ rust-exp.y rust-lang.c \
+ selftest.c sentinel-frame.c \
+ serial.c ser-base.c ser-unix.c ser-event.c skip.c \
solib.c solib-target.c source.c \
stabsread.c stack.c probe.c stap-probe.c std-regs.c \
symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
target.c target-dcache.c target-descriptions.c target-memory.c \
- thread.c top.c tracepoint.c \
+ tid-parse.c thread.c top.c tracepoint.c \
trad-frame.c \
tramp-frame.c \
typeprint.c \
common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \
target/waitstatus.c common/print-utils.c common/rsp-low.c \
common/errors.c common/common-debug.c common/common-exceptions.c \
- common/btrace-common.c common/fileio.c \
+ common/btrace-common.c common/fileio.c common/common-regcache.c \
$(SUBDIR_GCC_COMPILE_SRCS)
LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
tui/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
expression.h score-tdep.h gdb_select.h ser-tcp.h \
-extension.h extension-priv.h \
-build-id.h buildsym.h valprint.h \
+extension.h extension-priv.h nat/aarch64-linux-hw-point.h \
+build-id.h buildsym.h valprint.h nat/aarch64-linux.h \
typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
-amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
-sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h \
+amd64-linux-tdep.h linespec.h location.h i387-tdep.h mn10300-tdep.h \
+sparc64-tdep.h ppcobsd-tdep.h \
coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \
doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
amd64-darwin-tdep.h charset-list.h \
config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
+i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
ft32-tdep.h \
osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
python/python-internal.h python/python.h ravenscar-thread.h record.h \
common/common-debug.h common/cleanups.h common/gdb_setjmp.h \
common/common-exceptions.h target/target.h common/symbol.h \
common/common-regcache.h fbsd-tdep.h nat/linux-personality.h \
-common/fileio.h nat/x86-linux.h nat/x86-linux-dregs.h \
-nat/linux-namespaces.h
+common/fileio.h nat/x86-linux.h nat/x86-linux-dregs.h nat/amd64-linux-siginfo.h\
+nat/linux-namespaces.h arch/arm.h common/gdb_sys_time.h arch/aarch64-insn.h \
+tid-parse.h ser-event.h
# Header files that already have srcdir in them, or which are in objdir.
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
-REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
-
# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
# default their values the way we do for SER_HARDWIRE; in the future
# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
- linespec.o dictionary.o \
- infcall.o \
+ linespec.o dictionary.o namespace.o \
+ location.o infcall.o \
infcmd.o infrun.o \
- expprint.o environ.o stack.o thread.o \
+ expprint.o environ.o stack.o tid-parse.o thread.o thread-fsm.o \
exceptions.o \
extension.o \
filesystem.o \
go-lang.o go-valprint.o go-typeprint.o \
jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
- sentinel-frame.o \
+ selftest.o sentinel-frame.o \
complaints.o typeprint.o \
ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
m2-valprint.o \
- serial.o mdebugread.o top.o utils.o \
+ ser-event.o serial.o mdebugread.o top.o utils.o \
ui-file.o \
user-regs.o \
frame.o frame-unwind.o doublest.o \
frame-base.o \
inline-frame.o \
gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
- cp-namespace.o \
+ cp-namespace.o d-namespace.o \
reggroups.o \
+ rust-lang.o \
trad-frame.o \
tramp-frame.o \
solib.o solib-target.o \
format.o registry.o btrace.o record-btrace.o waitstatus.o \
print-utils.o rsp-low.o errors.o common-debug.o debug.o \
common-exceptions.o btrace-common.o fileio.o \
+ common-regcache.o \
$(SUBDIR_GCC_COMPILE_OBS)
TSOBS = inflow.o
ada-lex.c \
ada-exp.c \
jv-exp.c \
- d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
+ d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
YYOBJ = c-exp.o \
cp-name-parser.o \
ada-exp.o \
jv-exp.o \
- d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o
+ d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o rust-exp.o
# Things which need to be built when making a distribution.
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
else true; fi
+check-parallel: force
+ @if [ -f testsuite/Makefile ]; then \
+ rootme=`pwd`; export rootme; \
+ rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
+ cd testsuite; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
+ else true; fi
+
# The idea is to parallelize testing of multilibs, for example:
# make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
# will run 3 concurrent sessions of check, eventually testing all 10
-e '/version.[co]$$/d' \
-e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
-e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
+ -e 's/-exp\.o$$/-exp.y/' \
-e 's/\.[co]$$/.c/' \
-e 's,signals\.c,common/signals\.c,' \
-e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
cp-name-parser.c \
ada-lex.c ada-exp.c \
jv-exp.tab \
- d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
+ d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
rm -f TAGS $(INFOFILES)
rm -f $(YYFILES)
rm -f nm.h config.status
amd64-dicos-tdep.c \
amd64-linux-nat.c amd64-linux-tdep.c \
amd64-sol2-tdep.c \
- arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
+ arm.c arm-get-next-pcs.c \
+ arm-linux.c arm-linux-nat.c arm-linux-tdep.c \
+ arm-symbian-tdep.c arm-tdep.c \
armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
avr-tdep.c \
bfin-linux-tdep.c bfin-tdep.c \
ppcobsd-nat.c ppcobsd-tdep.c \
procfs.c \
ravenscar-thread.c \
- remote-m32r-sdi.c remote-mips.c \
remote-sim.c \
dcache.c \
rl78-tdep.c \
fileio.o: ${srcdir}/common/fileio.c
$(COMPILE) $(srcdir)/common/fileio.c
$(POSTCOMPILE)
+
+common-regcache.o: ${srcdir}/common/common-regcache.c
+ $(COMPILE) $(srcdir)/common/common-regcache.c
+ $(POSTCOMPILE)
+
#
# gdb/target/ dependencies
#
$(COMPILE) $(srcdir)/target/waitstatus.c
$(POSTCOMPILE)
+#
+# gdb/arch/ dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+arm.o: ${srcdir}/arch/arm.c
+ $(COMPILE) $(srcdir)/arch/arm.c
+ $(POSTCOMPILE)
+
+arm-linux.o: ${srcdir}/arch/arm-linux.c
+ $(COMPILE) $(srcdir)/arch/arm-linux.c
+ $(POSTCOMPILE)
+
+arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c
+ $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c
+ $(POSTCOMPILE)
+
# gdb/nat/ dependencies
#
# Need to explicitly specify the compile rule as make will do nothing
$(COMPILE) $(srcdir)/nat/x86-linux-dregs.c
$(POSTCOMPILE)
+amd64-linux-siginfo.o: ${srcdir}/nat/amd64-linux-siginfo.c
+ $(COMPILE) $(srcdir)/nat/amd64-linux-siginfo.c
+ $(POSTCOMPILE)
+
linux-namespaces.o: ${srcdir}/nat/linux-namespaces.c
$(COMPILE) $(srcdir)/nat/linux-namespaces.c
$(POSTCOMPILE)
+aarch64-linux-hw-point.o: ${srcdir}/nat/aarch64-linux-hw-point.c
+ $(COMPILE) $(srcdir)/nat/aarch64-linux-hw-point.c
+ $(POSTCOMPILE)
+
+aarch64-linux.o: ${srcdir}/nat/aarch64-linux.c
+ $(COMPILE) $(srcdir)/nat/aarch64-linux.c
+ $(POSTCOMPILE)
+
+# gdb/arch/ dependencies
+#
+# Need to explicitly specify the compile rule as make will do nothing
+# or try to compile the object file into the sub-directory.
+
+aarch64-insn.o: ${srcdir}/arch/aarch64-insn.c
+ $(COMPILE) $(srcdir)/arch/aarch64-insn.c
+ $(POSTCOMPILE)
+
#
# gdb/tui/ dependencies
#