+# Copyright 2012, 2013
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
+
#
# Some generic MIPS tests
#
# targets, make sure the call to "mips_arch_create" reflects that fact.
-# "LOSE" marks information about tests which fail at a particular point
-# in time, but which are not XFAILed. Either they used to pass
-# and indicate either regressions or the need to tweak the tests to keep
-# up the with code, or they are new tests and it is unknown whether or not
-# they should pass as-is for the given object formats.
-
-
# The functions below create and manipulate an "architecture data
# array" which contains entries for each MIPS architecture (or CPU)
# known to these tests. The array contains the following information
# The architecture includes the instructions defined
# by that MIPS ISA.
#
+# fpisa3, fpisa4, fpisa5
+# The architecture includes the floating-point
+# instructions defined by that MIPS ISA.
+#
# gpr_ilocks
# The architecture interlocks GPRs accesses. (That is,
# there are no load delay slots.)
# The architecture provides 32- or 64-bit General Purpose
# Registers.
#
+# singlefloat
+# The CPU is 64 bit, but only supports 32 bit FPU.
+#
+# nollsc
+# The CPU doesn't support ll, sc, lld and scd instructions.
+#
# as_flags: The assembler flags used when assembling tests for this
# architecture.
#
# mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
#
# This function returns the property list associated with ARCH in the
-# architecture data array. If INCLUDE_GPRSIZE is non-zero, an additional
-# "gpr32" or "gpr64" property will be returned as part of the list based
-# on the architecture's GPR size.
+# architecture data array, including the "canonical" target name as the
+# first element.
+#
+# If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
+# property will be returned as part of the list based on the
+# architecture's GPR size.
proc mips_arch_properties {arch {include_gprsize 1}} {
array set archdata [mips_arch_data $arch]
set props $archdata(props)
# The functions below facilitate running various types of tests.
-# run_dump_test_arch NAME ARCH
+# run_dump_test_arch NAME OPTS ARCH
+#
+# Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
+# Add the assembler and disassembler flags that are associated with
+# architecture ARCH.
+#
+# You can override the expected output for particular architectures.
+# The possible test names are, in order of preference:
#
-# Invoke "run_dump_test" for test NAME, with extra assembler and
-# disassembler flags to test architecture ARCH.
-proc run_dump_test_arch { name arch } {
+# 1. CARCH@NAME.d
+# 2. NAME.d
+#
+# where CARCH is the "canonical" name of architecture ARCH as recorded
+# in its associated property list.
+proc run_dump_test_arch { name opts arch } {
global subdir srcdir
- set archname "${arch}@${name}"
- if { [file exists "$srcdir/$subdir/${archname}.d"] } {
- set name $archname
+ set proparch [lindex [mips_arch_properties $arch 0] 0]
+ set prefixes [list ${proparch}@ ]
+ if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
+ lappend prefixes octeon@
+ }
+ foreach prefix ${prefixes} {
+ set archname ${prefix}${name}
+ if { [file exists "$srcdir/$subdir/${archname}.d"] } {
+ set name $archname
+ break
+ }
}
if [catch {run_dump_test $name \
- "{name {([mips_arch_displayname $arch])}}
- {objdump {[mips_arch_objdump_flags $arch]}}
- {as {[mips_arch_as_flags $arch]}}"} rv] {
+ "{name {([concat $opts [mips_arch_displayname $arch]])}}
+ {objdump {[mips_arch_objdump_flags $arch]}}
+ {as {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
perror "$rv"
untested "$subdir/$name ($arch)"
}
}
-# run_dump_test_arches NAME ARCH_LIST
+# run_dump_test_arches NAME [OPTS] ARCH_LIST
#
# Invoke "run_dump_test_arch" for test NAME, for each architecture
-# listed in ARCH_LIST.
-proc run_dump_test_arches { name arch_list } {
+# listed in ARCH_LIST. OPTS, if specified, is a list of additional
+# assembler options that should be used for all architectures.
+proc run_dump_test_arches { name args } {
+ set opts ""
+ if { [llength $args] > 1 } {
+ set opts [lindex $args 0]
+ set args [lrange $args 1 end]
+ }
+ set arch_list [lindex $args 0]
foreach arch $arch_list {
- run_dump_test_arch "$name" "$arch"
+ run_dump_test_arch $name $opts $arch
}
}
# run_list_test_arch NAME OPTS ARCH
#
-# Invoke "run_list_test" for test NAME with options OPTS, with extra
-# assembler flags to test architecture ARCH.
+# Invoke "run_list_test" for test NAME with additional assembler options OPTS.
+# Add the assembler flags that are associated with architecture ARCH.
proc run_list_test_arch { name opts arch } {
global subdir
- set testname "MIPS $name ([mips_arch_displayname $arch])"
- if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
- "$testname"} rv] {
+ set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
+ if [catch {run_list_test \
+ $name \
+ [concat $opts [mips_arch_as_flags $arch]] \
+ $testname} rv] {
perror "$rv"
untested "$testname"
}
}
-# run_list_test_arches NAME OPTS ARCH_LIST
+# run_list_test_arches NAME [OPTS] ARCH_LIST
#
-# Invoke "run_list_test_arch" for test NAME with options OPTS, for each
-# architecture listed in ARCH_LIST.
-proc run_list_test_arches { name opts arch_list } {
+# Invoke "run_list_test_arch" for test NAME, for each architecture listed
+# in ARCH_LIST. OPTS, if specified, is a list of additional assembler
+# options that should be used for all architectures.
+proc run_list_test_arches { name args } {
+ set opts ""
+ if { [llength $args] > 1 } {
+ set opts [lindex $args 0]
+ set args [lrange $args 1 end]
+ }
+ set arch_list [lindex $args 0]
foreach arch $arch_list {
run_list_test_arch "$name" "$opts" "$arch"
}
{ -march=mips1 -mtune=mips1 } { -mmips:3000 }
mips_arch_create mips2 32 mips1 { gpr_ilocks } \
{ -march=mips2 -mtune=mips2 } { -mmips:6000 }
-mips_arch_create mips3 64 mips2 {} \
+mips_arch_create mips3 64 mips2 { fpisa3 } \
{ -march=mips3 -mtune=mips3 } { -mmips:4000 }
-mips_arch_create mips4 64 mips3 {} \
+mips_arch_create mips4 64 mips3 { fpisa4 } \
{ -march=mips4 -mtune=mips4 } { -mmips:8000 }
-mips_arch_create mips5 64 mips4 {} \
+mips_arch_create mips5 64 mips4 { fpisa5 } \
{ -march=mips5 -mtune=mips5 } { -mmips:mips5 }
mips_arch_create mips32 32 mips2 {} \
{ -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
{ mipsisa32-*-* mipsisa32el-*-* }
-mips_arch_create mips32r2 32 mips32 { ror } \
+mips_arch_create mips32r2 32 mips32 { fpisa3 fpisa4 fpisa5 ror } \
{ -march=mips32r2 -mtune=mips32r2 } \
{ -mmips:isa32r2 } \
{ mipsisa32r2-*-* mipsisa32r2el-*-* }
{ mipsisa64r2-*-* mipsisa64r2el-*-* }
mips_arch_create mips16 32 {} {} \
{ -march=mips1 -mips16 } { -mmips:16 }
+mips_arch_create micromips 64 mips64r2 {} \
+ { -march=mips64 -mmicromips } {}
mips_arch_create r3000 32 mips1 {} \
{ -march=r3000 -mtune=r3000 } { -mmips:3000 }
mips_arch_create r3900 32 mips1 { gpr_ilocks } \
mips_arch_create octeon 64 mips64r2 {} \
{ -march=octeon -mtune=octeon } { -mmips:octeon } \
{ mips64octeon*-*-* }
+mips_arch_create octeonp 64 octeon {} \
+ { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
+ { }
+mips_arch_create octeon2 64 octeonp {} \
+ { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
+ { }
mips_arch_create xlr 64 mips64 {} \
{ -march=xlr -mtune=xlr } { -mmips:xlr }
+mips_arch_create r5900 64 mips3 { gpr_ilocks singlefloat nollsc } \
+ { -march=r5900 -mtune=r5900 } { -mmips:5900 } \
+ { mipsr5900el-*-* mips64r5900el-*-* }
#
# And now begin the actual tests! VxWorks uses RELA rather than REL
run_dump_test "vxworks1-el"
run_dump_test "vxworks1-xgot-el"
} elseif { [istarget mips*-*-*] } {
- set no_mips16 0
- set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
- set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
- set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
- set gpr_ilocks [expr [istarget mipstx39*-*-*]]
- set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
- set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
-
- if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
+ set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*]]
+ set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] \
+ || [istarget mips*-sde-elf*] || [istarget mips*-mti-elf*]]
+
+ if { [istarget "mips*-*-*linux*"]
+ || [istarget "mips*-sde-elf*"]
+ || [istarget "mips*-mti-elf*"]
+ || [istarget "mips*-*-*bsd*"] } then {
set tmips "t"
} else {
set tmips ""
} {
set el ""
}
- if { $ecoff } {
- set no_mips16 1
- }
- if { $no_mips16 } {
- mips_arch_destroy mips16
- }
-
+
+ run_dump_test_arches "dot-1" [mips_arch_list_matching mips1]
run_dump_test_arches "abs" [mips_arch_list_matching mips1]
run_dump_test_arches "add" [mips_arch_list_matching mips1]
run_dump_test_arches "and" [mips_arch_list_matching mips1]
run_dump_test "break20"
run_dump_test "trap20"
- # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
- # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
- # more information. Not sure if the fixes there are correct; should
- # branches to external labels be allowed for ECOFF?
run_dump_test_arches "beq" [mips_arch_list_matching mips1]
run_dump_test_arches "bge" [mips_arch_list_matching mips1]
run_dump_test_arches "bgeu" [mips_arch_list_matching mips1]
run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
run_dump_test "branch-misc-3"
run_dump_test "branch-swap"
+
+ # Sweep a range of branch offsets so that it hits a position where
+ # it is at the beginning of a frag and then swapped with a 16-bit
+ # instruction from the preceding frag. The offset will be somewhere
+ # close below 4096 as this is the default obstack size limit that
+ # we use and some space will have been already consumed. The exact
+ # amount depends on the host's programming model.
+ for { set count 960 } { $count <= 1024 } { incr count } {
+ run_list_test "branch-swap-2" "--defsym count=$count" \
+ "MIPS branch swapping ($count)"
+ }
+
run_dump_test "div"
if { !$addr32 } {
- run_dump_test_arches "dli" [mips_arch_list_matching mips3]
- }
- if $elf {
- run_dump_test_arches "elf-jal" [mips_arch_list_matching mips1]
- } else {
- run_dump_test "jal"
+ run_dump_test_arches "dli" [mips_arch_list_matching mips3]
}
+ run_dump_test_arches "jal" [mips_arch_list_matching mips1]
+ run_dump_test_arches "jal-mask-11" [mips_arch_list_matching mips1]
+ run_dump_test_arches "jal-mask-12" [mips_arch_list_matching mips1]
+ run_dump_test_arches "jal-mask-21" [mips_arch_list_matching micromips]
+ run_dump_test_arches "jal-mask-22" [mips_arch_list_matching micromips]
run_dump_test "eret-1"
run_dump_test "eret-2"
run_dump_test "eret-3"
-
- if $elf {
- run_dump_test_arches "jal-svr4pic" \
+ run_dump_test_arches "fix-rm7000-1" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "fix-rm7000-2" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "24k-branch-delay-1" \
+ [mips_arch_list_matching mips1]
+ run_dump_test_arches "24k-triple-stores-1" \
+ [mips_arch_list_matching fpisa5 !octeon]
+ run_dump_test_arches "24k-triple-stores-2" \
+ [mips_arch_list_matching mips2]
+ run_dump_test_arches "24k-triple-stores-2-llsc" \
+ [mips_arch_list_matching mips2 !nollsc]
+ run_dump_test_arches "24k-triple-stores-3" \
+ [mips_arch_list_matching mips2]
+ run_dump_test_arches "24k-triple-stores-4" \
+ [mips_arch_list_matching mips2 !singlefloat]
+ run_dump_test_arches "24k-triple-stores-5" \
[mips_arch_list_matching mips1]
- run_dump_test_arches "jal-svr4pic-noreorder" \
+ run_dump_test_arches "24k-triple-stores-6" \
+ [mips_arch_list_matching mips2 !singlefloat]
+ run_dump_test_arches "24k-triple-stores-7" \
+ [mips_arch_list_matching mips2 !singlefloat]
+ run_dump_test_arches "24k-triple-stores-8" \
[mips_arch_list_matching mips1]
- }
- if $elf { run_dump_test "jal-xgot" }
+ run_dump_test_arches "24k-triple-stores-9" \
+ [mips_arch_list_matching mips1]
+ run_dump_test_arches "24k-triple-stores-10" \
+ [mips_arch_list_matching mips1]
+ run_dump_test_arches "24k-triple-stores-11" \
+ [mips_arch_list_matching mips1]
+
+ run_dump_test_arches "jal-svr4pic" [mips_arch_list_matching mips1]
+ run_dump_test_arches "jal-svr4pic-noreorder" \
+ [mips_arch_list_matching mips1]
+ run_dump_test "jal-xgot"
run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
if $has_newabi { run_dump_test "jal-newabi" }
- if !$aout { run_dump_test "la" }
- if $elf { run_dump_test "la-svr4pic" }
- if $elf { run_dump_test "la-xgot" }
- if $elf { run_dump_test "lca-svr4pic" }
- if $elf { run_dump_test "lca-xgot" }
- if !$aout {
- # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
- # (Should split and then use appropriate arch lists.)
- run_dump_test_arches "lb" [mips_arch_list_matching mips1 !mips2]
- }
- if $elf {
- run_dump_test_arches "lb-svr4pic" \
+ run_dump_test "la"
+ run_dump_test "la-svr4pic"
+ run_dump_test "la-xgot"
+ run_dump_test "lca-svr4pic"
+ run_dump_test "lca-xgot"
+ # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
+ # (Should split and then use appropriate arch lists.)
+ run_dump_test_arches "lb" [mips_arch_list_matching mips1 !mips2]
+ run_dump_test_arches "lb-svr4pic" \
[mips_arch_list_matching mips1 !gpr_ilocks]
- run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
- }
- if $elf {
- # Both versions specify the cpu, so we can run both regardless of
- # the interlocking in the configured default cpu.
- run_dump_test "lb-xgot"
- run_dump_test "lb-xgot-ilocks"
- }
- if !$aout {
- if !$gpr_ilocks {
- run_dump_test "ld"
- } else {
- if !$addr32 {
- run_dump_test "ld-ilocks"
- } else {
- run_dump_test "ld-ilocks-addr32"
- }
- }
- }
- if $elf { run_dump_test "ld-svr4pic" }
- if $elf { run_dump_test "ld-xgot" }
+ run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
+ # Both versions specify the cpu, so we can run both regardless of
+ # the interlocking in the configured default cpu.
+ run_dump_test "lb-xgot"
+ run_dump_test "lb-xgot-ilocks"
+ run_dump_test_arches "ld" [mips_arch_list_matching mips1]
+ run_dump_test_arches "ld-forward" [mips_arch_list_matching mips1]
+ run_dump_test_arches "sd" [mips_arch_list_matching mips1]
+ run_dump_test_arches "sd-forward" [mips_arch_list_matching mips1]
+ run_dump_test_arches "l_d" [mips_arch_list_matching mips1 !singlefloat]
+ run_dump_test_arches "l_d-single" [mips_arch_list_matching mips1 singlefloat]
+ run_dump_test_arches "l_d-forward" [mips_arch_list_matching mips1 !singlefloat]
+ run_dump_test_arches "s_d" [mips_arch_list_matching mips1 !singlefloat]
+ run_dump_test_arches "s_d-single" [mips_arch_list_matching mips1 singlefloat]
+ run_dump_test_arches "s_d-forward" [mips_arch_list_matching mips1 !singlefloat]
+ run_dump_test_arches "ldc1" [mips_arch_list_matching mips2 !singlefloat]
+ run_dump_test_arches "ldc1-forward" [mips_arch_list_matching mips2 !singlefloat]
+ run_dump_test_arches "sdc1" [mips_arch_list_matching mips2 !singlefloat]
+ run_dump_test_arches "sdc1-forward" [mips_arch_list_matching mips2 !singlefloat]
+ if $has_newabi {
+ run_dump_test_arches "ld-n32" [mips_arch_list_matching mips3]
+ run_dump_test_arches "ld-forward-n32" \
+ [mips_arch_list_matching mips3]
+ run_dump_test_arches "sd-n32" [mips_arch_list_matching mips3]
+ run_dump_test_arches "sd-forward-n32" \
+ [mips_arch_list_matching mips3]
+ run_dump_test_arches "l_d-n32" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "l_d-forward-n32" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "s_d-n32" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "s_d-forward-n32" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "ldc1-n32" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "ldc1-forward-n32" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "sdc1-n32" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "sdc1-forward-n32" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "ld-n64" [mips_arch_list_matching mips3]
+ run_dump_test_arches "ld-forward-n64" \
+ [mips_arch_list_matching mips3]
+ run_dump_test_arches "sd-n64" [mips_arch_list_matching mips3]
+ run_dump_test_arches "sd-forward-n64" \
+ [mips_arch_list_matching mips3]
+ run_dump_test_arches "l_d-n64" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "l_d-forward-n64" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "s_d-n64" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "s_d-forward-n64" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "ldc1-n64" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "ldc1-forward-n64" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "sdc1-n64" [mips_arch_list_matching mips3 !singlefloat]
+ run_dump_test_arches "sdc1-forward-n64" \
+ [mips_arch_list_matching mips3 !singlefloat]
+ }
+ run_dump_test_arches "ld-zero" [mips_arch_list_matching mips1]
+ run_dump_test_arches "ld-zero-2" [mips_arch_list_matching mips2 !nollsc]
+ run_dump_test_arches "ld-zero-3" [mips_arch_list_matching mips3 !nollsc]
+ run_dump_test_arches "ld-zero-u" [mips_arch_list_matching micromips]
+ run_dump_test_arches "ld-zero-q" [mips_arch_list_matching r5900]
+ run_dump_test "ld-svr4pic"
+ run_dump_test "ld-xgot"
run_dump_test_arches "li" [mips_arch_list_matching mips1]
- if !$aout { run_dump_test "lifloat" }
- if $elf { run_dump_test "lif-svr4pic" }
- if $elf { run_dump_test "lif-xgot" }
+ run_dump_test "lifloat"
+ run_dump_test "lif-svr4pic"
+ run_dump_test "lif-xgot"
run_dump_test_arches "mips4" [mips_arch_list_matching mips4]
- run_dump_test_arches "mips4-fp" [mips_arch_list_matching mips4]
+ run_dump_test_arches "mips4-fp" "-32" \
+ [mips_arch_list_matching fpisa4]
+ run_dump_test_arches "mips4-fp" "-mabi=o64" \
+ [mips_arch_list_matching fpisa4 gpr64]
run_list_test_arches "mips4-fp" "-32 -msoft-float" \
- [mips_arch_list_matching mips4]
+ [mips_arch_list_matching fpisa4]
run_dump_test_arches "mips4-branch-likely" \
[mips_arch_list_matching mips4]
run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
[mips_arch_list_matching mips4]
- run_dump_test_arches "mips5" [mips_arch_list_matching mips5]
+ run_dump_test_arches "mips5-fp" "-32" \
+ [mips_arch_list_matching fpisa5]
+ run_dump_test_arches "mips5-fp" "-mabi=o64" \
+ [mips_arch_list_matching fpisa5 gpr64]
run_dump_test "mul"
run_dump_test_arches "rol" [mips_arch_list_matching mips1 !ror]
run_dump_test_arches "rol64" [mips_arch_list_matching gpr64 !ror]
run_dump_test_arches "rol64-hw" [mips_arch_list_matching gpr64 ror]
- if !$aout { run_dump_test "sb" }
+ run_dump_test "sb"
run_dump_test "trunc"
- if !$aout { run_dump_test "ulh" }
+ run_dump_test "ulh"
run_dump_test_arches "ulh2-eb" [mips_arch_list_matching mips1]
run_dump_test_arches "ulh2-el" [mips_arch_list_matching mips1]
- if $elf { run_dump_test "ulh-svr4pic" }
- if $elf { run_dump_test "ulh-xgot" }
- if !$aout {
- run_dump_test "ulw"
- run_dump_test "uld"
- run_dump_test "ush"
- run_dump_test "usw"
- run_dump_test "usd"
- }
- run_dump_test_arches "ulw2-eb" \
- [mips_arch_list_matching mips1 !gpr_ilocks]
+ run_dump_test "ulh-svr4pic"
+ run_dump_test "ulh-xgot"
+ run_dump_test "ulw"
+ run_dump_test "uld"
+ run_dump_test "ush"
+ run_dump_test "usw"
+ run_dump_test "usd"
+ run_dump_test_arches "ulw2-eb" [mips_arch_list_matching mips1 !gpr_ilocks]
run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
- run_dump_test_arches "ulw2-el" \
- [mips_arch_list_matching mips1 !gpr_ilocks]
+ run_dump_test_arches "ulw2-el" [mips_arch_list_matching mips1 !gpr_ilocks]
run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
- # The mips16 test can only be run on ELF, because only ELF
- # supports the necessary mips16 reloc.
- if { $elf && !$no_mips16 } {
- run_dump_test "mips16"
- run_dump_test "mips16-64"
- # Check MIPS16e extensions
- run_dump_test_arches "mips16e" [mips_arch_list_matching mips32]
- # Check jalx handling
- run_dump_test "mips16-jalx"
- run_dump_test "mips-jalx"
- run_dump_test "mips-jalx-2"
- # Check MIPS16 HI16/LO16 relocations
- run_dump_test "mips16-hilo"
- if $has_newabi {
- run_dump_test "mips16-hilo-n32"
- }
- run_dump_test "mips16-hilo-match"
+ run_dump_test "mips16"
+ run_dump_test "mips16-64"
+ run_dump_test "mips16-macro"
+ # Check MIPS16e extensions
+ run_dump_test_arches "mips16e" [mips_arch_list_matching mips32 !micromips]
+ # Check jalx handling
+ run_dump_test "mips16-jalx"
+ run_dump_test "mips-jalx"
+ run_dump_test "mips-jalx-2"
+ # Check MIPS16 HI16/LO16 relocations
+ run_dump_test "mips16-hilo"
+ if $has_newabi {
+ run_dump_test "mips16-hilo-n32"
}
+ run_dump_test "mips16-hilo-match"
run_dump_test "delay"
run_dump_test "nodelay"
run_dump_test "mips4010"
run_dump_test "vr4120-2"
run_dump_test "vr4130"
run_dump_test "vr5400"
+ run_list_test "vr5400-ill" "-march=vr5400"
run_dump_test "vr5500"
run_dump_test "rm7000"
run_dump_test "perfcount"
run_dump_test "lineno"
run_dump_test "sync"
+ run_dump_test_arches "virt" [mips_arch_list_matching mips32r2]
+ run_dump_test_arches "virt64" [mips_arch_list_matching mips64r2]
+
run_dump_test_arches "mips32" [mips_arch_list_matching mips32]
+ run_dump_test_arches "mips32-imm" [mips_arch_list_matching mips32]
run_dump_test_arches "mips32-sf32" [mips_arch_list_matching mips32]
run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
!octeon]
run_dump_test_arches "mips64r2" [mips_arch_list_matching mips64r2]
- run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]
+ run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
run_dump_test "set-arch"
run_dump_test "xlr-ext"
}
- run_dump_test "relax"
+ run_dump_test_arches "relax" [mips_arch_list_matching mips2]
+ run_dump_test_arches "relax-at" [mips_arch_list_matching mips2]
run_dump_test "relax-swap1-mips1"
run_dump_test "relax-swap1-mips2"
run_dump_test "relax-swap2"
+ run_dump_test_arches "relax-swap3" [mips_arch_list_all]
+ run_list_test_arches "relax-bc1any" "-mips3d -relax-branch" \
+ [mips_arch_list_matching mips64 \
+ !micromips]
+ run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
+ [mips_arch_list_matching mips64r2 \
+ !micromips]
+
+ run_dump_test_arches "eva" [mips_arch_list_matching mips32r2 !octeon]
run_list_test "illegal" "-32"
run_list_test "baddata1" "-32"
run_list_test "jalr" ""
- # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
- # It's unknown whether they _should_ pass as-is, or whether different
- # variants are needed for ELF and ECOFF.
run_dump_test "mips-gp32-fp32"
run_dump_test "mips-gp32-fp64"
run_dump_test "mips-gp64-fp32"
run_dump_test "mips-gp64-fp64"
- if $elf {
- # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
- # containing 4650-specific instructions with -m4650 and -mcpu=4650,
- # and verify that they're the same. Specifically, we're checking
- # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
- # instruction does get used. In previous versions of GAS,
- # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
- run_dump_test "elf_e_flags1"
- run_dump_test "elf_e_flags2"
- run_dump_test "elf_e_flags3"
- run_dump_test "elf_e_flags4"
-
- # Check EF_MIPS_ARCH markings for each supported architecture.
- run_dump_test "elf_arch_mips1"
- run_dump_test "elf_arch_mips2"
- run_dump_test "elf_arch_mips3"
- run_dump_test "elf_arch_mips4"
- run_dump_test "elf_arch_mips5"
- run_dump_test "elf_arch_mips32"
- run_dump_test "elf_arch_mips32r2"
- run_dump_test "elf_arch_mips64"
- run_dump_test "elf_arch_mips64r2"
-
- # Verify that ASE markings are handled properly.
- if { !$no_mips16 } { run_dump_test "elf_ase_mips16" }
-
- run_dump_test "mips-gp32-fp32-pic"
- run_dump_test "mips-gp32-fp64-pic"
- run_dump_test "mips-gp64-fp32-pic"
- run_dump_test "mips-gp64-fp64-pic"
-
- run_dump_test "mips-abi32"
- run_dump_test "mips-abi32-pic"
- run_dump_test "mips-abi32-pic2"
-
- run_dump_test "elf${el}-rel"
- run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
- run_dump_test "e32${el}-rel2"
- run_dump_test "elf${el}-rel3"
- run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
- run_dump_test "e32-rel4"
- run_dump_test "elf-rel5"
- run_dump_test "elf-rel6"
- if $has_newabi {
- run_dump_test "elf-rel6-n32"
- run_dump_test "elf-rel6-n64"
- }
- run_dump_test "elf-rel7"
- run_dump_test "elf-rel8"
- run_dump_test "elf-rel8-mips16"
- run_dump_test "elf-rel9"
- run_dump_test "elf-rel9-mips16"
- if $has_newabi {
- run_dump_test "elf-rel10"
- run_dump_test "elf-rel11"
- }
- run_dump_test "elf-rel12"
- run_dump_test "elf-rel13"
- run_dump_test "elf-rel13-mips16"
- run_dump_test "elf-rel14"
-
- if $has_newabi {
- run_dump_test "elf-rel15"
- run_dump_test "elf-rel16"
-
- run_dump_test "elf-rel-got-n32"
- run_dump_test "elf-rel-xgot-n32"
- run_dump_test "elf-rel-got-n64"
- run_dump_test "elf-rel-xgot-n64"
- }
- run_dump_test "elf-rel17"
- if $has_newabi {
- run_dump_test "elf-rel18"
- }
- run_dump_test "elf-rel19"
- run_dump_test "elf-rel20"
- if $has_newabi {
- run_dump_test "elf-rel21"
- run_dump_test "elf-rel22"
- run_dump_test "elf-rel23"
- run_dump_test "elf-rel23a"
- run_dump_test "elf-rel23b"
- run_dump_test "elf-rel24"
- }
+ # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
+ # containing 4650-specific instructions with -m4650 and -mcpu=4650,
+ # and verify that they're the same. Specifically, we're checking
+ # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
+ # instruction does get used. In previous versions of GAS,
+ # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
+ run_dump_test "elf_e_flags1"
+ run_dump_test "elf_e_flags2"
+ run_dump_test "elf_e_flags3"
+ run_dump_test "elf_e_flags4"
+
+ # Check EF_MIPS_ARCH markings for each supported architecture.
+ run_dump_test "elf_arch_mips1"
+ run_dump_test "elf_arch_mips2"
+ run_dump_test "elf_arch_mips3"
+ run_dump_test "elf_arch_mips4"
+ run_dump_test "elf_arch_mips5"
+ run_dump_test "elf_arch_mips32"
+ run_dump_test "elf_arch_mips32r2"
+ run_dump_test "elf_arch_mips64"
+ run_dump_test "elf_arch_mips64r2"
+
+ # Verify that ASE markings are handled properly.
+ run_dump_test "elf_ase_mips16"
+ run_dump_test "elf_ase_mips16-2"
+
+ run_dump_test "elf_ase_micromips"
+ run_dump_test "elf_ase_micromips-2"
+
+ run_dump_test "mips-gp32-fp32-pic"
+ run_dump_test "mips-gp32-fp64-pic"
+ run_dump_test "mips-gp64-fp32-pic"
+ run_dump_test "mips-gp64-fp64-pic"
+
+ run_dump_test "mips-abi32"
+ run_dump_test "mips-abi32-pic"
+ run_dump_test "mips-abi32-pic2"
+
+ run_dump_test "elf${el}-rel"
+ run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64 !singlefloat]
+ run_dump_test "e32${el}-rel2"
+ run_dump_test "elf${el}-rel3"
+ run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
+ run_dump_test "e32-rel4"
+ run_dump_test "elf-rel5"
+ run_dump_test "elf-rel6"
+ if $has_newabi {
+ run_dump_test "elf-rel6-n32"
+ run_dump_test "elf-rel6-n64"
+ }
+ run_dump_test "elf-rel7"
+ run_dump_test "elf-rel8"
+ run_dump_test "elf-rel8-mips16"
+ run_dump_test "elf-rel9"
+ run_dump_test "elf-rel9-mips16"
+ if $has_newabi {
+ run_dump_test "elf-rel10"
+ run_dump_test "elf-rel11"
+ }
+ run_dump_test "elf-rel12"
+ run_dump_test "elf-rel13"
+ run_dump_test "elf-rel13-mips16"
+ run_dump_test "elf-rel14"
+
+ if $has_newabi {
+ run_dump_test "elf-rel15"
+ run_dump_test "elf-rel16"
- run_dump_test "elf-rel25"
- run_dump_test "elf-rel25a"
- run_dump_test "elf-rel26"
+ run_dump_test "elf-rel-got-n32"
+ run_dump_test "elf-rel-xgot-n32"
+ run_dump_test "elf-rel-got-n64"
+ run_dump_test "elf-rel-xgot-n64"
+ }
+ run_dump_test "elf-rel17"
+ if $has_newabi {
+ run_dump_test "elf-rel18"
+ }
+ run_dump_test "elf-rel19"
+ run_dump_test "elf-rel20"
+ if $has_newabi {
+ run_dump_test "elf-rel21"
+ run_dump_test "elf-rel22"
+ run_dump_test "elf-rel23"
+ run_dump_test "elf-rel23a"
+ run_dump_test "elf-rel23b"
+ run_dump_test "elf-rel24"
+ }
- run_dump_test_arches "elf-rel27" [mips_arch_list_all]
+ run_dump_test "elf-rel25"
+ run_dump_test "elf-rel25a"
+ run_dump_test "elf-rel26"
- if { !$no_mips16 } {
- run_dump_test "${tmips}mips${el}16-e"
- run_dump_test "${tmips}mips${el}16-f"
- }
- run_dump_test "elf-consthilo"
- run_dump_test "expr1"
+ run_dump_test_arches "elf-rel27" [mips_arch_list_all]
- run_list_test "tls-ill" "-32"
- run_dump_test "tls-o32"
- run_dump_test "jalr2"
+ if $has_newabi {
+ run_dump_test "elf-rel28-n32"
+ run_dump_test "elf-rel28-n64"
+ run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
}
+ run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
+
+ run_dump_test "${tmips}mips${el}16-e"
+ run_dump_test "${tmips}mips${el}16-f"
+
+ run_dump_test "elf-consthilo"
+ run_dump_test "expr1"
+
+ run_list_test "tls-ill" "-32"
+ run_dump_test "tls-o32"
+ run_dump_test "tls-relw"
+ run_dump_test "jalr2"
+ run_dump_test_arches "jalr3" [mips_arch_list_matching mips1 \
+ !micromips]
+ if $has_newabi {
+ run_dump_test_arches "jalr3-n32" \
+ [mips_arch_list_matching mips3 \
+ !micromips]
+ run_dump_test_arches "jalr3-n64" \
+ [mips_arch_list_matching mips3 \
+ !micromips]
+ }
+
+ run_dump_test_arches "aent" [mips_arch_list_matching mips1]
+
+ run_dump_test_arches "branch-misc-4" [mips_arch_list_matching mips1]
+ run_dump_test_arches "branch-misc-4-64" [mips_arch_list_matching mips3]
+
+ run_dump_test_arches "loc-swap" [mips_arch_list_all]
+ run_dump_test_arches "loc-swap-dis" [mips_arch_list_all]
+ run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
+ run_dump_test_arches "loc-swap-3" [mips_arch_list_all]
+
+ run_dump_test "nan-legacy-1"
+ run_dump_test "nan-legacy-2"
+ run_dump_test "nan-legacy-3"
+ run_dump_test "nan-legacy-4"
+ run_dump_test "nan-legacy-5"
+
+ run_dump_test "nan-2008-1"
+ run_dump_test "nan-2008-2"
+ run_dump_test "nan-2008-3"
+ run_dump_test "nan-2008-4"
+
+ run_list_test "nan-error-1"
+ run_list_test "nan-error-2" "-mnan=foo"
if $has_newabi {
run_dump_test "n32-consec"
run_dump_test "cp0sel-names-mips64r2"
run_dump_test "cp0sel-names-sb1"
+ run_dump_test "cp1-names-numeric"
+ run_dump_test "cp1-names-r3000"
+ run_dump_test "cp1-names-r4000" \
+ { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
+ run_dump_test "cp1-names-r4000" \
+ { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
+ run_dump_test "cp1-names-mips32"
+ run_dump_test "cp1-names-mips32r2"
+ run_dump_test "cp1-names-mips64"
+ run_dump_test "cp1-names-mips64r2"
+ run_dump_test "cp1-names-sb1"
+
run_dump_test "hwr-names-numeric"
run_dump_test "hwr-names-mips32r2"
run_dump_test "hwr-names-mips64r2"
run_dump_test "loongson-2f-2"
run_dump_test "loongson-2f-3"
+ run_dump_test "loongson-3a"
+ run_dump_test "loongson-3a-2"
+ run_dump_test "loongson-3a-3"
+
run_dump_test_arches "octeon" [mips_arch_list_matching octeon]
- run_list_test_arches "octeon-ill" "" \
- [mips_arch_list_matching octeon]
+ run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
+ run_list_test_arches "octeon-ill" [mips_arch_list_matching octeon]
+ run_dump_test_arches "octeon-pref" [mips_arch_list_matching octeon]
+ run_dump_test_arches "octeon2" [mips_arch_list_matching octeon2]
run_dump_test "smartmips"
- run_dump_test "mips32-dsp"
- run_dump_test "mips32-dspr2"
+ run_dump_test_arches "mips32-dsp" [mips_arch_list_matching mips32r2 \
+ !octeon]
+ run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
+ !octeon]
run_dump_test "mips64-dsp"
run_dump_test "mips32-mt"
- if { $elf && !$no_mips16 } {
- run_dump_test "mips16-dwarf2"
- if $has_newabi {
- run_dump_test "mips16-dwarf2-n32"
- }
- }
- if { !$no_mips16 } {
- run_dump_test "mips16e-jrc"
- run_dump_test "mips16e-save"
- run_dump_test "mips16e-64"
- run_list_test "mips16e-64" "-march=mips32 -32"
- run_dump_test "mips16-intermix"
+ run_dump_test "mips16-dwarf2"
+ if $has_newabi {
+ run_dump_test "mips16-dwarf2-n32"
}
+ run_dump_test "mips16-stabs"
+
+ run_dump_test "mips16e-jrc"
+ run_dump_test "mips16e-save"
+ run_list_test "mips16e-save-err" "-march=mips32 -32"
+ run_dump_test "mips16e-64"
+ run_list_test "mips16e-64" "-march=mips32 -32"
+ run_dump_test "mips16-intermix"
+
run_dump_test "vxworks1"
run_dump_test "vxworks1-xgot"
run_dump_test "vxworks1-el"
run_dump_test "align"
run_dump_test "align2"
run_dump_test "align2-el"
+ run_dump_test "align3"
run_dump_test "odd-float"
+ run_dump_test "ehword"
run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
[mips_arch_list_matching mips2]
run_list_test_arches "mips-hard-float-flag" \
"-32 -msoft-float -mhard-float" \
- [mips_arch_list_matching mips1]
+ [mips_arch_list_matching mips1 !singlefloat]
run_list_test_arches "mips-double-float-flag" \
"-32 -msingle-float -mdouble-float" \
- [mips_arch_list_matching mips1]
+ [mips_arch_list_matching mips1 !singlefloat]
run_dump_test "mips16-vis-1"
run_dump_test "call-nonpic-1"
run_dump_test "mips32-sync"
+ run_dump_test_arches "mips32r2-sync" \
+ [mips_arch_list_matching mips32r2]
+ run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
+ run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
+ [mips_arch_list_matching mips3] \
+ [mips_arch_list_matching mips32] ] ]
+ run_dump_test_arches "daddi" [mips_arch_list_matching mips3]
+ run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
+ [mips_arch_list_matching mips4] \
+ [mips_arch_list_matching mips32] ] ]
if $has_newabi { run_dump_test "cfi-n64-1" }
- run_dump_test_arches "aent" [mips_arch_list_matching mips1]
+ run_dump_test "pr12915"
+ run_dump_test "reginfo-1a"
+ run_dump_test "reginfo-1b"
+
+ run_dump_test "micromips"
+ run_dump_test "micromips-trap"
+ run_dump_test "micromips-insn32"
+ run_dump_test "micromips-noinsn32"
+ run_list_test "micromips" "-mips32r2 -32 -mfp64 -minsn32" \
+ "microMIPS for MIPS32r2 (instructions invalid in insn32 mode)"
+ run_list_test "micromips-size-0" \
+ "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
+ run_dump_test "micromips-size-1"
+ run_dump_test "micromips-branch-relax"
+ run_dump_test "micromips-branch-relax-pic"
+ run_dump_test "micromips-branch-delay"
+ run_dump_test "micromips-warn-branch-delay"
+ run_dump_test "micromips-warn-branch-delay-1"
+ run_dump_test "micromips-b16"
+ run_list_test "micromips-ill"
+
+ run_dump_test_arches "mcu" [mips_arch_list_matching mips32r2 \
+ !octeon]
+ run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
+ run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
+ if $has_newabi {
+ run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
+ run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
+ run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
+ run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
+ }
+ run_dump_test_arches "lui" [mips_arch_list_matching mips1]
+ run_list_test_arches "lui-1" "-32" [mips_arch_list_matching mips1]
+ run_list_test_arches "lui-2" "-32" [mips_arch_list_matching mips1]
+
+ run_dump_test "r5900"
+ run_dump_test "r5900-full"
+ run_list_test "r5900-nollsc" "-mabi=o64 -march=r5900"
+ run_dump_test "r5900-vu0"
+ run_dump_test "r5900-full-vu0"
+ run_dump_test "r5900-all-vu0"
+ run_list_test "r5900-error-vu0" "-march=r5900"
+
+ run_list_test_arches "ext-ill" [mips_arch_list_matching mips64r2]
+
+ run_list_test "ase-errors-1" "-mabi=32 -march=mips1" "ASE errors (1)"
+ run_list_test "ase-errors-2" "-mabi=o64 -march=mips3" "ASE errors (2)"
+ run_list_test "ase-errors-3" "-mabi=32 -march=mips1" "ASE errors (3)"
+ run_list_test "ase-errors-4" "-mabi=o64 -march=mips3" "ASE errors (4)"
+
+ run_dump_test_arches "la-reloc" [mips_arch_list_matching mips1]
+ if { $has_newabi } {
+ run_dump_test_arches "dla-reloc" [mips_arch_list_matching mips3]
+ }
+
+ # Start with MIPS II to avoid load delay nops.
+ run_dump_test_arches "ld-reloc" [mips_arch_list_matching mips2]
+ run_dump_test_arches "ulw-reloc" [mips_arch_list_matching mips2]
+ run_dump_test_arches "ulh-reloc" [mips_arch_list_matching mips2]
+
+ run_dump_test "l_d-reloc"
+ run_list_test "bltzal"
+
+ run_dump_test_arches "msa" [mips_arch_list_matching mips32r2]
+ run_dump_test_arches "msa64" [mips_arch_list_matching mips64r2]
+ run_dump_test_arches "msa-relax" [mips_arch_list_matching mips32r2]
+ run_dump_test_arches "msa-branch" [mips_arch_list_matching mips32r2]
}