/* ehopt.c--optimize gcc exception frame information.
- Copyright 1998, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1998-2014 Free Software Foundation, Inc.
Written by Ian Lance Taylor <ian@cygnus.com>.
-This file is part of GAS, the GNU Assembler.
+ This file is part of GAS, the GNU Assembler.
-GAS is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ GAS is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3, or (at your option)
+ any later version.
-GAS is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ GAS is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with GAS; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
#include "as.h"
#include "subsegs.h"
+#include "struc-symbol.h"
/* We include this ELF file, even though we may not be assembling for
ELF, since the exception frame information is always in a format
derived from DWARF. */
-#include "elf/dwarf2.h"
+#include "dwarf2.h"
/* Try to optimize gcc 2.8 exception frame information.
not know this value, it always uses four bytes. We will know the
value at the end of assembly, so we can do better. */
-static int eh_frame_code_alignment PARAMS ((int));
+struct cie_info
+{
+ unsigned code_alignment;
+ int z_augmentation;
+};
+
+static int get_cie_info (struct cie_info *);
-/* Get the code alignment factor from the CIE. */
+/* Extract information from the CIE. */
static int
-eh_frame_code_alignment (in_seg)
- int in_seg;
+get_cie_info (struct cie_info *info)
{
- /* ??? Assume .eh_frame and .debug_frame have the same alignment. */
- static int code_alignment;
-
fragS *f;
fixS *fix;
int offset;
char CIE_id;
char augmentation[10];
int iaug;
-
- if (code_alignment != 0)
- return code_alignment;
-
- /* Can't find the alignment if we've changed sections. */
- if (! in_seg)
- return -1;
+ int code_alignment = 0;
/* We should find the CIE at the start of the section. */
-#if defined (BFD_ASSEMBLER) || defined (MANY_SEGMENTS)
f = seg_info (now_seg)->frchainP->frch_root;
-#else
- f = frchain_now->frch_root;
-#endif
-#ifdef BFD_ASSEMBLER
fix = seg_info (now_seg)->frchainP->fix_root;
-#else
- fix = *seg_fix_rootP;
-#endif
/* Look through the frags of the section to find the code alignment. */
/* First make sure that the CIE Identifier Tag is 0/-1. */
- if (strcmp (segment_name (now_seg), ".debug_frame") == 0)
+ if (strncmp (segment_name (now_seg), ".debug_frame", 12) == 0)
CIE_id = (char)0xff;
else
CIE_id = 0;
|| f->fr_literal[offset + 1] != CIE_id
|| f->fr_literal[offset + 2] != CIE_id
|| f->fr_literal[offset + 3] != CIE_id)
- {
- code_alignment = -1;
- return -1;
- }
+ return 0;
/* Next make sure the CIE version number is 1. */
if (f == NULL
|| f->fr_fix - offset < 1
|| f->fr_literal[offset] != 1)
- {
- code_alignment = -1;
- return -1;
- }
+ return 0;
/* Skip the augmentation (a null terminated string). */
f = f->fr_next;
}
if (f == NULL)
- {
- code_alignment = -1;
- return -1;
- }
+ return 0;
+
while (offset < f->fr_fix && f->fr_literal[offset] != '\0')
{
if ((size_t) iaug < (sizeof augmentation) - 1)
f = f->fr_next;
}
if (f == NULL)
- {
- code_alignment = -1;
- return -1;
- }
+ return 0;
augmentation[iaug] = '\0';
if (augmentation[0] == '\0')
f = f->fr_next;
}
if (f == NULL)
- {
- code_alignment = -1;
- return -1;
- }
- }
- else
- {
- code_alignment = -1;
- return -1;
+ return 0;
}
+ else if (augmentation[0] != 'z')
+ return 0;
/* We're now at the code alignment factor, which is a ULEB128. If
it isn't a single byte, forget it. */
code_alignment = f->fr_literal[offset] & 0xff;
- if ((code_alignment & 0x80) != 0 || code_alignment == 0)
- {
- code_alignment = -1;
- return -1;
- }
+ if ((code_alignment & 0x80) != 0)
+ code_alignment = 0;
+
+ info->code_alignment = code_alignment;
+ info->z_augmentation = (augmentation[0] == 'z');
- return code_alignment;
+ return 1;
}
+enum frame_state
+{
+ state_idle,
+ state_saw_size,
+ state_saw_cie_offset,
+ state_saw_pc_begin,
+ state_seeing_aug_size,
+ state_skipping_aug,
+ state_wait_loc4,
+ state_saw_loc4,
+ state_error,
+};
+
/* This function is called from emit_expr. It looks for cases which
we can optimize.
change *EXP and *PNBYTES. */
int
-check_eh_frame (exp, pnbytes)
- expressionS *exp;
- unsigned int *pnbytes;
+check_eh_frame (expressionS *exp, unsigned int *pnbytes)
{
struct frame_data
{
+ enum frame_state state;
+
+ int cie_info_ok;
+ struct cie_info cie_info;
+
symbolS *size_end_sym;
fragS *loc4_frag;
- int saw_size;
- int saw_advance_loc4;
int loc4_fix;
+
+ int aug_size;
+ int aug_shift;
};
static struct frame_data eh_frame_data;
if (flag_traditional_format)
return 0;
+#ifdef md_allow_eh_opt
+ if (! md_allow_eh_opt)
+ return 0;
+#endif
+
/* Select the proper section data. */
- if (strcmp (segment_name (now_seg), ".eh_frame") == 0)
+ if (strncmp (segment_name (now_seg), ".eh_frame", 9) == 0
+ && segment_name (now_seg)[9] != '_')
d = &eh_frame_data;
- else if (strcmp (segment_name (now_seg), ".debug_frame") == 0)
+ else if (strncmp (segment_name (now_seg), ".debug_frame", 12) == 0)
d = &debug_frame_data;
else
return 0;
- if (d->saw_size && S_IS_DEFINED (d->size_end_sym))
+ if (d->state >= state_saw_size && S_IS_DEFINED (d->size_end_sym))
{
/* We have come to the end of the CIE or FDE. See below where
we set saw_size. We must check this first because we may now
be looking at the next size. */
- d->saw_size = 0;
- d->saw_advance_loc4 = 0;
+ d->state = state_idle;
}
- if (! d->saw_size
- && *pnbytes == 4)
+ switch (d->state)
{
- /* This might be the size of the CIE or FDE. We want to know
- the size so that we don't accidentally optimize across an FDE
- boundary. We recognize the size in one of two forms: a
- symbol which will later be defined as a difference, or a
- subtraction of two symbols. Either way, we can tell when we
- are at the end of the FDE because the symbol becomes defined
- (in the case of a subtraction, the end symbol, from which the
- start symbol is being subtracted). Other ways of describing
- the size will not be optimized. */
- if ((exp->X_op == O_symbol || exp->X_op == O_subtract)
- && ! S_IS_DEFINED (exp->X_add_symbol))
+ case state_idle:
+ if (*pnbytes == 4)
{
- d->saw_size = 1;
- d->size_end_sym = exp->X_add_symbol;
+ /* This might be the size of the CIE or FDE. We want to know
+ the size so that we don't accidentally optimize across an FDE
+ boundary. We recognize the size in one of two forms: a
+ symbol which will later be defined as a difference, or a
+ subtraction of two symbols. Either way, we can tell when we
+ are at the end of the FDE because the symbol becomes defined
+ (in the case of a subtraction, the end symbol, from which the
+ start symbol is being subtracted). Other ways of describing
+ the size will not be optimized. */
+ if ((exp->X_op == O_symbol || exp->X_op == O_subtract)
+ && ! S_IS_DEFINED (exp->X_add_symbol))
+ {
+ d->state = state_saw_size;
+ d->size_end_sym = exp->X_add_symbol;
+ }
}
- }
- else if (d->saw_size
- && *pnbytes == 1
- && exp->X_op == O_constant
- && exp->X_add_number == DW_CFA_advance_loc4)
- {
- /* This might be a DW_CFA_advance_loc4. Record the frag and the
- position within the frag, so that we can change it later. */
- d->saw_advance_loc4 = 1;
- frag_grow (1);
- d->loc4_frag = frag_now;
- d->loc4_fix = frag_now_fix ();
- }
- else if (d->saw_advance_loc4
- && *pnbytes == 4
- && exp->X_op == O_constant)
- {
- int ca;
-
- /* This is a case which we can optimize. The two symbols being
- subtracted were in the same frag and the expression was
- reduced to a constant. We can do the optimization entirely
- in this function. */
-
- d->saw_advance_loc4 = 0;
-
- ca = eh_frame_code_alignment (1);
- if (ca < 0)
+ break;
+
+ case state_saw_size:
+ case state_saw_cie_offset:
+ /* Assume whatever form it appears in, it appears atomically. */
+ d->state = (enum frame_state) (d->state + 1);
+ break;
+
+ case state_saw_pc_begin:
+ /* Decide whether we should see an augmentation. */
+ if (! d->cie_info_ok
+ && ! (d->cie_info_ok = get_cie_info (&d->cie_info)))
+ d->state = state_error;
+ else if (d->cie_info.z_augmentation)
{
- /* Don't optimize. */
+ d->state = state_seeing_aug_size;
+ d->aug_size = 0;
+ d->aug_shift = 0;
}
- else if (exp->X_add_number % ca == 0
- && exp->X_add_number / ca < 0x40)
+ else
+ d->state = state_wait_loc4;
+ break;
+
+ case state_seeing_aug_size:
+ /* Bytes == -1 means this comes from an leb128 directive. */
+ if ((int)*pnbytes == -1 && exp->X_op == O_constant)
{
- d->loc4_frag->fr_literal[d->loc4_fix]
- = DW_CFA_advance_loc | (exp->X_add_number / ca);
- /* No more bytes needed. */
- return 1;
+ d->aug_size = exp->X_add_number;
+ d->state = state_skipping_aug;
}
- else if (exp->X_add_number < 0x100)
+ else if (*pnbytes == 1 && exp->X_op == O_constant)
{
- d->loc4_frag->fr_literal[d->loc4_fix] = DW_CFA_advance_loc1;
- *pnbytes = 1;
+ unsigned char byte = exp->X_add_number;
+ d->aug_size |= (byte & 0x7f) << d->aug_shift;
+ d->aug_shift += 7;
+ if ((byte & 0x80) == 0)
+ d->state = state_skipping_aug;
}
- else if (exp->X_add_number < 0x10000)
+ else
+ d->state = state_error;
+ if (d->state == state_skipping_aug && d->aug_size == 0)
+ d->state = state_wait_loc4;
+ break;
+
+ case state_skipping_aug:
+ if ((int)*pnbytes < 0)
+ d->state = state_error;
+ else
{
- d->loc4_frag->fr_literal[d->loc4_fix] = DW_CFA_advance_loc2;
- *pnbytes = 2;
+ int left = (d->aug_size -= *pnbytes);
+ if (left == 0)
+ d->state = state_wait_loc4;
+ else if (left < 0)
+ d->state = state_error;
}
- }
- else if (d->saw_advance_loc4
- && *pnbytes == 4
- && exp->X_op == O_subtract)
- {
- /* This is a case we can optimize. The expression was not
- reduced, so we can not finish the optimization until the end
- of the assembly. We set up a variant frag which we handle
- later. */
+ break;
- d->saw_advance_loc4 = 0;
+ case state_wait_loc4:
+ if (*pnbytes == 1
+ && exp->X_op == O_constant
+ && exp->X_add_number == DW_CFA_advance_loc4)
+ {
+ /* This might be a DW_CFA_advance_loc4. Record the frag and the
+ position within the frag, so that we can change it later. */
+ frag_grow (1);
+ d->state = state_saw_loc4;
+ d->loc4_frag = frag_now;
+ d->loc4_fix = frag_now_fix ();
+ }
+ break;
- frag_var (rs_cfa, 4, 0, 0, make_expr_symbol (exp),
- d->loc4_fix, (char *) d->loc4_frag);
+ case state_saw_loc4:
+ d->state = state_wait_loc4;
+ if (*pnbytes != 4)
+ break;
+ if (exp->X_op == O_constant)
+ {
+ /* This is a case which we can optimize. The two symbols being
+ subtracted were in the same frag and the expression was
+ reduced to a constant. We can do the optimization entirely
+ in this function. */
+ if (exp->X_add_number < 0x40)
+ {
+ d->loc4_frag->fr_literal[d->loc4_fix]
+ = DW_CFA_advance_loc | exp->X_add_number;
+ /* No more bytes needed. */
+ return 1;
+ }
+ else if (exp->X_add_number < 0x100)
+ {
+ d->loc4_frag->fr_literal[d->loc4_fix] = DW_CFA_advance_loc1;
+ *pnbytes = 1;
+ }
+ else if (exp->X_add_number < 0x10000)
+ {
+ d->loc4_frag->fr_literal[d->loc4_fix] = DW_CFA_advance_loc2;
+ *pnbytes = 2;
+ }
+ }
+ else if (exp->X_op == O_subtract && d->cie_info.code_alignment == 1)
+ {
+ /* This is a case we can optimize. The expression was not
+ reduced, so we can not finish the optimization until the end
+ of the assembly. We set up a variant frag which we handle
+ later. */
+ frag_var (rs_cfa, 4, 0, 1 << 3, make_expr_symbol (exp),
+ d->loc4_fix, (char *) d->loc4_frag);
+ return 1;
+ }
+ else if ((exp->X_op == O_divide
+ || exp->X_op == O_right_shift)
+ && d->cie_info.code_alignment > 1)
+ {
+ if (exp->X_add_symbol->bsym
+ && exp->X_op_symbol->bsym
+ && exp->X_add_symbol->sy_value.X_op == O_subtract
+ && exp->X_op_symbol->sy_value.X_op == O_constant
+ && ((exp->X_op == O_divide
+ ? exp->X_op_symbol->sy_value.X_add_number
+ : (offsetT) 1 << exp->X_op_symbol->sy_value.X_add_number)
+ == (offsetT) d->cie_info.code_alignment))
+ {
+ /* This is a case we can optimize as well. The expression was
+ not reduced, so we can not finish the optimization until the
+ end of the assembly. We set up a variant frag which we
+ handle later. */
+ frag_var (rs_cfa, 4, 0, d->cie_info.code_alignment << 3,
+ make_expr_symbol (&exp->X_add_symbol->sy_value),
+ d->loc4_fix, (char *) d->loc4_frag);
+ return 1;
+ }
+ }
+ break;
- return 1;
+ case state_error:
+ /* Just skipping everything. */
+ break;
}
- else
- d->saw_advance_loc4 = 0;
return 0;
}
/* The function estimates the size of a rs_cfa variant frag based on
the current values of the symbols. It is called before the
- relaxation loop. We set fr_subtype to the expected length. */
+ relaxation loop. We set fr_subtype{0:2} to the expected length. */
int
-eh_frame_estimate_size_before_relax (frag)
- fragS *frag;
+eh_frame_estimate_size_before_relax (fragS *frag)
{
- int ca;
offsetT diff;
+ int ca = frag->fr_subtype >> 3;
int ret;
- ca = eh_frame_code_alignment (0);
- diff = resolve_symbol_value (frag->fr_symbol, 0);
+ diff = resolve_symbol_value (frag->fr_symbol);
- if (ca < 0)
- ret = 4;
- else if (diff % ca == 0 && diff / ca < 0x40)
+ gas_assert (ca > 0);
+ diff /= ca;
+ if (diff < 0x40)
ret = 0;
else if (diff < 0x100)
ret = 1;
else
ret = 4;
- frag->fr_subtype = ret;
+ frag->fr_subtype = (frag->fr_subtype & ~7) | ret;
return ret;
}
/* This function relaxes a rs_cfa variant frag based on the current
- values of the symbols. fr_subtype is the current length of the
- frag. This returns the change in frag length. */
+ values of the symbols. fr_subtype{0:2} is the current length of
+ the frag. This returns the change in frag length. */
int
-eh_frame_relax_frag (frag)
- fragS *frag;
+eh_frame_relax_frag (fragS *frag)
{
int oldsize, newsize;
- oldsize = frag->fr_subtype;
+ oldsize = frag->fr_subtype & 7;
newsize = eh_frame_estimate_size_before_relax (frag);
return newsize - oldsize;
}
/* This function converts a rs_cfa variant frag into a normal fill
frag. This is called after all relaxation has been done.
- fr_subtype will be the desired length of the frag. */
+ fr_subtype{0:2} will be the desired length of the frag. */
void
-eh_frame_convert_frag (frag)
- fragS *frag;
+eh_frame_convert_frag (fragS *frag)
{
offsetT diff;
fragS *loc4_frag;
- int loc4_fix;
+ int loc4_fix, ca;
loc4_frag = (fragS *) frag->fr_opcode;
loc4_fix = (int) frag->fr_offset;
- diff = resolve_symbol_value (frag->fr_symbol, finalize_syms);
+ diff = resolve_symbol_value (frag->fr_symbol);
- if (frag->fr_subtype == 0)
+ ca = frag->fr_subtype >> 3;
+ gas_assert (ca > 0);
+ diff /= ca;
+ switch (frag->fr_subtype & 7)
{
- int ca;
+ case 0:
+ gas_assert (diff < 0x40);
+ loc4_frag->fr_literal[loc4_fix] = DW_CFA_advance_loc | diff;
+ break;
- ca = eh_frame_code_alignment (0);
- assert (ca > 0 && diff % ca == 0 && diff / ca < 0x40);
- loc4_frag->fr_literal[loc4_fix] = DW_CFA_advance_loc | (diff / ca);
- }
- else if (frag->fr_subtype == 1)
- {
- assert (diff < 0x100);
+ case 1:
+ gas_assert (diff < 0x100);
loc4_frag->fr_literal[loc4_fix] = DW_CFA_advance_loc1;
frag->fr_literal[frag->fr_fix] = diff;
- }
- else if (frag->fr_subtype == 2)
- {
- assert (diff < 0x10000);
+ break;
+
+ case 2:
+ gas_assert (diff < 0x10000);
loc4_frag->fr_literal[loc4_fix] = DW_CFA_advance_loc2;
md_number_to_chars (frag->fr_literal + frag->fr_fix, diff, 2);
+ break;
+
+ default:
+ md_number_to_chars (frag->fr_literal + frag->fr_fix, diff, 4);
+ break;
}
- else
- md_number_to_chars (frag->fr_literal + frag->fr_fix, diff, 4);
- frag->fr_fix += frag->fr_subtype;
+ frag->fr_fix += frag->fr_subtype & 7;
frag->fr_type = rs_fill;
+ frag->fr_subtype = 0;
frag->fr_offset = 0;
}