/* dwarf2dbg.c - DWARF2 debug support
- Copyright (C) 1999, 2000 Free Software Foundation, Inc.
+ Copyright (C) 1999-2019 Free Software Foundation, Inc.
Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
/* Logical line numbers can be controlled by the compiler via the
- following two directives:
+ following directives:
.file FILENO "file.c"
- .loc FILENO LINENO [COLUMN]
+ .loc FILENO LINENO [COLUMN] [basic_block] [prologue_end] \
+ [epilogue_begin] [is_stmt VALUE] [isa VALUE] \
+ [discriminator VALUE]
+*/
- FILENO is the filenumber. */
+#include "as.h"
+#include "safe-ctype.h"
-#include "ansidecl.h"
+#ifdef HAVE_LIMITS_H
+#include <limits.h>
+#else
+#ifdef HAVE_SYS_PARAM_H
+#include <sys/param.h>
+#endif
+#ifndef INT_MAX
+#define INT_MAX (int) (((unsigned) (-1)) >> 1)
+#endif
+#endif
-#include "as.h"
#include "dwarf2dbg.h"
+#include <filenames.h>
+
+#ifdef HAVE_DOS_BASED_FILE_SYSTEM
+/* We need to decide which character to use as a directory separator.
+ Just because HAVE_DOS_BASED_FILE_SYSTEM is defined, it does not
+ necessarily mean that the backslash character is the one to use.
+ Some environments, eg Cygwin, can support both naming conventions.
+ So we use the heuristic that we only need to use the backslash if
+ the path is an absolute path starting with a DOS style drive
+ selector. eg C: or D: */
+# define INSERT_DIR_SEPARATOR(string, offset) \
+ do \
+ { \
+ if (offset > 1 \
+ && string[0] != 0 \
+ && string[1] == ':') \
+ string [offset] = '\\'; \
+ else \
+ string [offset] = '/'; \
+ } \
+ while (0)
+#else
+# define INSERT_DIR_SEPARATOR(string, offset) string[offset] = '/'
+#endif
+
+#ifndef DWARF2_FORMAT
+# define DWARF2_FORMAT(SEC) dwarf2_format_32bit
+#endif
+
+#ifndef DWARF2_ADDR_SIZE
+# define DWARF2_ADDR_SIZE(bfd) (bfd_arch_bits_per_address (bfd) / 8)
+#endif
+
+#ifndef DWARF2_FILE_NAME
+#define DWARF2_FILE_NAME(FILENAME, DIRNAME) FILENAME
+#endif
+
+#ifndef DWARF2_FILE_TIME_NAME
+#define DWARF2_FILE_TIME_NAME(FILENAME,DIRNAME) 0
+#endif
+
+#ifndef DWARF2_FILE_SIZE_NAME
+#define DWARF2_FILE_SIZE_NAME(FILENAME,DIRNAME) 0
+#endif
+
+#ifndef DWARF2_VERSION
+#define DWARF2_VERSION 2
+#endif
+
+/* The .debug_aranges version has been 2 in DWARF version 2, 3 and 4. */
+#ifndef DWARF2_ARANGES_VERSION
+#define DWARF2_ARANGES_VERSION 2
+#endif
+
+/* This implementation outputs version 3 .debug_line information. */
+#ifndef DWARF2_LINE_VERSION
+#define DWARF2_LINE_VERSION 3
+#endif
+
#include "subsegs.h"
-#include "elf/dwarf2.h"
+#include "dwarf2.h"
/* Since we can't generate the prolog until the body is complete, we
use three different subsegments for .debug_line: one holding the
#define DL_FILES 1
#define DL_BODY 2
-/* First special line opcde - leave room for the standard opcodes.
+/* If linker relaxation might change offsets in the code, the DWARF special
+ opcodes and variable-length operands cannot be used. If this macro is
+ nonzero, use the DW_LNS_fixed_advance_pc opcode instead. */
+#ifndef DWARF2_USE_FIXED_ADVANCE_PC
+# define DWARF2_USE_FIXED_ADVANCE_PC linkrelax
+#endif
+
+/* First special line opcode - leave room for the standard opcodes.
Note: If you want to change this, you'll have to update the
"standard_opcode_lengths" table that is emitted below in
- dwarf2_finish(). */
-#define DWARF2_LINE_OPCODE_BASE 10
+ out_debug_line(). */
+#define DWARF2_LINE_OPCODE_BASE 13
#ifndef DWARF2_LINE_BASE
/* Minimum line offset in a special line info. opcode. This value
#ifndef DWARF2_LINE_MIN_INSN_LENGTH
/* Define the architecture-dependent minimum instruction length (in
bytes). This value should be rather too small than too big. */
-# define DWARF2_LINE_MIN_INSN_LENGTH 4
+# define DWARF2_LINE_MIN_INSN_LENGTH 1
#endif
-/* Flag that indicates the initial value of the is_stmt_start flag.
- In the present implementation, we do not mark any lines as
- the beginning of a source statement, because that information
- is not made available by the GCC front-end. */
-#define DWARF2_LINE_DEFAULT_IS_STMT 1
-
-/* Flag that indicates the initial value of the is_stmt_start flag.
- In the present implementation, we do not mark any lines as
- the beginning of a source statement, because that information
- is not made available by the GCC front-end. */
+/* Flag that indicates the initial value of the is_stmt_start flag. */
#define DWARF2_LINE_DEFAULT_IS_STMT 1
/* Given a special op, return the line skip amount. */
/* The maximum address skip amount that can be encoded with a special op. */
#define MAX_SPECIAL_ADDR_DELTA SPECIAL_ADDR(255)
-#define INITIAL_STATE \
- /* Initialize as per DWARF2.0 standard. */ \
- 0, /* address */ \
- 1, /* file */ \
- 1, /* line */ \
- 0, /* column */ \
- DWARF2_LINE_DEFAULT_IS_STMT, /* is_stmt */ \
- 0, /* basic_block */ \
- 1 /* empty_sequence */
-
-static struct {
- /* state machine state as per DWARF2 manual: */
- struct dwarf2_sm {
- addressT addr;
- unsigned int filenum;
- unsigned int line;
- unsigned int column;
- unsigned int
- is_stmt : 1,
- basic_block : 1,
- empty_sequence : 1; /* current code sequence has no DWARF2 directives? */
- } sm;
-
- unsigned int
- any_dwarf2_directives : 1; /* did we emit any DWARF2 line debug directives? */
-
- fragS * frag; /* frag that "addr" is relative to */
- segT text_seg; /* text segment "addr" is relative to */
- subsegT text_subseg;
- segT line_seg; /* ".debug_line" segment */
- int last_filename; /* index of last filename that was used */
- int num_filenames; /* index of last filename in use */
- int filename_len; /* length of the filename array */
- struct {
- int dir; /* valid after gen_dir_list() only */
- char *name; /* full path before gen_dir_list(), filename afterwards */
- } *file;
-
- struct dwarf2_line_info current; /* current source info */
-
- /* counters for statistical purposes */
- unsigned int num_line_entries;
- unsigned int opcode_hist[256]; /* histogram of opcode frequencies */
-} ls = {
- {
- INITIAL_STATE
- },
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- NULL,
- { NULL, 0, 0, 0, 0 },
- 0,
- {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
- }
-};
-
-/* Function prototypes. */
-static void out_uleb128 PARAMS ((addressT));
-static void out_sleb128 PARAMS ((offsetT));
-static void gen_addr_line PARAMS ((int, addressT));
-static void reset_state_machine PARAMS ((void));
-static void out_set_addr PARAMS ((addressT));
-static void out_end_sequence PARAMS ((void));
-static int get_filenum PARAMS ((int, char *));
-static void gen_dir_list PARAMS ((void));
-static void gen_file_list PARAMS ((void));
-static void print_stats PARAMS ((unsigned long));
+#ifndef TC_PARSE_CONS_RETURN_NONE
+#define TC_PARSE_CONS_RETURN_NONE BFD_RELOC_NONE
+#endif
-#define out_byte(byte) FRAG_APPEND_1_CHAR(byte)
-#define out_opcode(opc) (out_byte ((opc)), ++ls.opcode_hist[(opc) & 0xff])
+struct line_entry
+{
+ struct line_entry *next;
+ symbolS *label;
+ struct dwarf2_line_info loc;
+};
-/* Output an unsigned "little-endian base 128" number. */
+/* Don't change the offset of next in line_entry. set_or_check_view
+ calls in dwarf2_gen_line_info_1 depend on it. */
+static char unused[offsetof(struct line_entry, next) ? -1 : 1]
+ATTRIBUTE_UNUSED;
-static void
-out_uleb128 (value)
- addressT value;
+struct line_subseg
{
- unsigned char byte, more = 0x80;
+ struct line_subseg *next;
+ subsegT subseg;
+ struct line_entry *head;
+ struct line_entry **ptail;
+ struct line_entry **pmove_tail;
+};
- do
- {
- byte = value & 0x7f;
- value >>= 7;
- if (value == 0)
- more = 0;
- out_byte (more | byte);
- }
- while (more);
-}
+struct line_seg
+{
+ struct line_seg *next;
+ segT seg;
+ struct line_subseg *head;
+ symbolS *text_start;
+ symbolS *text_end;
+};
-/* Output a signed "little-endian base 128" number. */
+/* Collects data for all line table entries during assembly. */
+static struct line_seg *all_segs;
+static struct line_seg **last_seg_ptr;
-static void
-out_sleb128 (value)
- offsetT value;
+struct file_entry
{
- unsigned char byte, more = 0x80;
+ const char *filename;
+ unsigned int dir;
+};
- do
- {
- byte = value & 0x7f;
- value >>= 7;
- if (((value == 0) && ((byte & 0x40) == 0))
- || ((value == -1) && ((byte & 0x40) != 0)))
- more = 0;
- out_byte (more | byte);
- }
- while (more);
-}
+/* Table of files used by .debug_line. */
+static struct file_entry *files;
+static unsigned int files_in_use;
+static unsigned int files_allocated;
-/* Encode a pair of line and address skips as efficiently as possible.
- Note that the line skip is signed, whereas the address skip is
- unsigned. */
+/* Table of directories used by .debug_line. */
+static char **dirs;
+static unsigned int dirs_in_use;
+static unsigned int dirs_allocated;
-static void
-gen_addr_line (line_delta, addr_delta)
- int line_delta;
- addressT addr_delta;
-{
- unsigned int tmp, opcode;
+/* TRUE when we've seen a .loc directive recently. Used to avoid
+ doing work when there's nothing to do. */
+bfd_boolean dwarf2_loc_directive_seen;
- tmp = line_delta - DWARF2_LINE_BASE;
+/* TRUE when we're supposed to set the basic block mark whenever a
+ label is seen. */
+bfd_boolean dwarf2_loc_mark_labels;
- if (tmp >= DWARF2_LINE_RANGE)
- {
- out_opcode (DW_LNS_advance_line);
- out_sleb128 (line_delta);
- tmp = 0 - DWARF2_LINE_BASE;
- line_delta = 0;
- }
+/* Current location as indicated by the most recent .loc directive. */
+static struct dwarf2_line_info current =
+{
+ 1, 1, 0, 0,
+ DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0,
+ 0, NULL
+};
- tmp += DWARF2_LINE_OPCODE_BASE;
+/* This symbol is used to recognize view number forced resets in loc
+ lists. */
+static symbolS *force_reset_view;
- /* Try using a special opcode. */
- opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
- if (opcode <= 255)
- {
- out_opcode (opcode);
- return;
- }
+/* This symbol evaluates to an expression that, if nonzero, indicates
+ some view assert check failed. */
+static symbolS *view_assert_failed;
- /* Try using DW_LNS_const_add_pc followed by special op. */
- opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
- if (opcode <= 255)
- {
- out_opcode (DW_LNS_const_add_pc);
- out_opcode (opcode);
- return;
- }
+/* The size of an address on the target. */
+static unsigned int sizeof_address;
+\f
+static unsigned int get_filenum (const char *, unsigned int);
- out_opcode (DW_LNS_advance_pc);
- out_uleb128 (addr_delta);
+#ifndef TC_DWARF2_EMIT_OFFSET
+#define TC_DWARF2_EMIT_OFFSET generic_dwarf2_emit_offset
- if (line_delta)
- /* Output line-delta. */
- out_opcode (tmp);
- else
- /* Append new row with current info. */
- out_opcode (DW_LNS_copy);
-}
+/* Create an offset to .dwarf2_*. */
static void
-reset_state_machine ()
+generic_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
{
- static const struct dwarf2_sm initial_state = { INITIAL_STATE };
+ expressionS exp;
- ls.sm = initial_state;
+ memset (&exp, 0, sizeof exp);
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = symbol;
+ exp.X_add_number = 0;
+ emit_expr (&exp, size);
}
+#endif
-/* Set an absolute address (may results in a relocation entry). */
+/* Find or create (if CREATE_P) an entry for SEG+SUBSEG in ALL_SEGS. */
-static void
-out_set_addr (addr)
- addressT addr;
+static struct line_subseg *
+get_line_subseg (segT seg, subsegT subseg, bfd_boolean create_p)
{
- subsegT saved_subseg;
- segT saved_seg;
- expressionS expr;
- symbolS *sym;
- int bytes_per_address;
+ struct line_seg *s = seg_info (seg)->dwarf2_line_seg;
+ struct line_subseg **pss, *lss;
- saved_seg = now_seg;
- saved_subseg = now_subseg;
+ if (s == NULL)
+ {
+ if (!create_p)
+ return NULL;
+
+ s = XNEW (struct line_seg);
+ s->next = NULL;
+ s->seg = seg;
+ s->head = NULL;
+ *last_seg_ptr = s;
+ last_seg_ptr = &s->next;
+ seg_info (seg)->dwarf2_line_seg = s;
+ }
+ gas_assert (seg == s->seg);
- subseg_set (ls.text_seg, ls.text_subseg);
- sym = symbol_new (".L0\001", now_seg, addr, frag_now);
+ for (pss = &s->head; (lss = *pss) != NULL ; pss = &lss->next)
+ {
+ if (lss->subseg == subseg)
+ goto found_subseg;
+ if (lss->subseg > subseg)
+ break;
+ }
- subseg_set (saved_seg, saved_subseg);
+ lss = XNEW (struct line_subseg);
+ lss->next = *pss;
+ lss->subseg = subseg;
+ lss->head = NULL;
+ lss->ptail = &lss->head;
+ lss->pmove_tail = &lss->head;
+ *pss = lss;
-#ifdef BFD_ASSEMBLER
- bytes_per_address = bfd_arch_bits_per_address (stdoutput) / 8;
-#else
- /* FIXME. */
- bytes_per_address = 4;
-#endif
+ found_subseg:
+ return lss;
+}
- out_opcode (DW_LNS_extended_op);
- out_uleb128 (bytes_per_address + 1);
+/* (Un)reverse the line_entry list starting from H. */
- out_opcode (DW_LNE_set_address);
- expr.X_op = O_symbol;
- expr.X_add_symbol = sym;
- expr.X_add_number = 0;
- emit_expr (&expr, bytes_per_address);
+static struct line_entry *
+reverse_line_entry_list (struct line_entry *h)
+{
+ struct line_entry *p = NULL, *e, *n;
+
+ for (e = h; e; e = n)
+ {
+ n = e->next;
+ e->next = p;
+ p = e;
+ }
+ return p;
}
-/* Emit DW_LNS_end_sequence and reset state machine. Does not
- preserve the current segment/sub-segment! */
+/* Compute the view for E based on the previous entry P. If we
+ introduce an (undefined) view symbol for P, and H is given (P must
+ be the tail in this case), introduce view symbols for earlier list
+ entries as well, until one of them is constant. */
static void
-out_end_sequence ()
+set_or_check_view (struct line_entry *e, struct line_entry *p,
+ struct line_entry *h)
{
- addressT addr, delta;
- fragS *text_frag;
+ expressionS viewx;
- if (ls.text_seg)
+ memset (&viewx, 0, sizeof (viewx));
+ viewx.X_unsigned = 1;
+
+ /* First, compute !(E->label > P->label), to tell whether or not
+ we're to reset the view number. If we can't resolve it to a
+ constant, keep it symbolic. */
+ if (!p || (e->loc.view == force_reset_view && force_reset_view))
{
- subseg_set (ls.text_seg, ls.text_subseg);
-#ifdef md_current_text_addr
- addr = md_current_text_addr ();
-#else
- addr = frag_now_fix ();
-#endif
- text_frag = frag_now;
- subseg_set (ls.line_seg, DL_BODY);
- if (text_frag != ls.frag)
+ viewx.X_op = O_constant;
+ viewx.X_add_number = 0;
+ viewx.X_add_symbol = NULL;
+ viewx.X_op_symbol = NULL;
+ }
+ else
+ {
+ viewx.X_op = O_gt;
+ viewx.X_add_number = 0;
+ viewx.X_add_symbol = e->label;
+ viewx.X_op_symbol = p->label;
+ resolve_expression (&viewx);
+ if (viewx.X_op == O_constant)
+ viewx.X_add_number = !viewx.X_add_number;
+ else
{
- out_set_addr (addr);
- ls.sm.addr = addr;
- ls.frag = text_frag;
+ viewx.X_add_symbol = make_expr_symbol (&viewx);
+ viewx.X_add_number = 0;
+ viewx.X_op_symbol = NULL;
+ viewx.X_op = O_logical_not;
}
- else
+ }
+
+ if (S_IS_DEFINED (e->loc.view) && symbol_constant_p (e->loc.view))
+ {
+ expressionS *value = symbol_get_value_expression (e->loc.view);
+ /* We can't compare the view numbers at this point, because in
+ VIEWX we've only determined whether we're to reset it so
+ far. */
+ if (viewx.X_op == O_constant)
+ {
+ if (!value->X_add_number != !viewx.X_add_number)
+ as_bad (_("view number mismatch"));
+ }
+ /* Record the expression to check it later. It is the result of
+ a logical not, thus 0 or 1. We just add up all such deferred
+ expressions, and resolve it at the end. */
+ else if (!value->X_add_number)
{
- delta = (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH;
- if (delta > 0)
+ symbolS *deferred = make_expr_symbol (&viewx);
+ if (view_assert_failed)
{
- /* Advance address without updating the line-debug
- matrix---the end_sequence entry is used only to tell
- the debugger the end of the sequence. */
- out_opcode (DW_LNS_advance_pc);
- out_uleb128 (delta);
+ expressionS chk;
+
+ memset (&chk, 0, sizeof (chk));
+ chk.X_unsigned = 1;
+ chk.X_op = O_add;
+ chk.X_add_number = 0;
+ chk.X_add_symbol = view_assert_failed;
+ chk.X_op_symbol = deferred;
+ deferred = make_expr_symbol (&chk);
}
+ view_assert_failed = deferred;
}
}
- else
- subseg_set (ls.line_seg, DL_BODY);
-
- out_opcode (DW_LNS_extended_op);
- out_uleb128 (1);
- out_byte (DW_LNE_end_sequence);
- reset_state_machine ();
-}
+ if (viewx.X_op != O_constant || viewx.X_add_number)
+ {
+ expressionS incv;
-/* Look up a filenumber either by filename or by filenumber. If both
- a filenumber and a filename are specified, lookup by filename takes
- precedence. If the filename cannot be found, it is added to the
- filetable and the filenumber for the new entry is returned. */
+ if (!p->loc.view)
+ {
+ p->loc.view = symbol_temp_make ();
+ gas_assert (!S_IS_DEFINED (p->loc.view));
+ }
-static int
-get_filenum (filenum, file)
- int filenum;
- char *file;
-{
- int i, last = filenum - 1;
- char char0 = file[0];
+ memset (&incv, 0, sizeof (incv));
+ incv.X_unsigned = 1;
+ incv.X_op = O_symbol;
+ incv.X_add_symbol = p->loc.view;
+ incv.X_add_number = 1;
- /* If filenum is out of range of the filename table, then try using the
- table entry returned from the previous call. */
- if (last >= ls.num_filenames || last < 0)
- last = ls.last_filename;
+ if (viewx.X_op == O_constant)
+ {
+ gas_assert (viewx.X_add_number == 1);
+ viewx = incv;
+ }
+ else
+ {
+ viewx.X_add_symbol = make_expr_symbol (&viewx);
+ viewx.X_add_number = 0;
+ viewx.X_op_symbol = make_expr_symbol (&incv);
+ viewx.X_op = O_multiply;
+ }
+ }
- /* Do a quick check against the specified or previously used filenum. */
- if (ls.num_filenames > 0 && ls.file[last].name[0] == char0
- && strcmp (ls.file[last].name + 1, file + 1) == 0)
- return last + 1;
+ if (!S_IS_DEFINED (e->loc.view))
+ {
+ symbol_set_value_expression (e->loc.view, &viewx);
+ S_SET_SEGMENT (e->loc.view, expr_section);
+ symbol_set_frag (e->loc.view, &zero_address_frag);
+ }
- /* No match, fall back to simple linear scan. */
- for (i = 0; i < ls.num_filenames; ++i)
+ /* Define and attempt to simplify any earlier views needed to
+ compute E's. */
+ if (h && p && p->loc.view && !S_IS_DEFINED (p->loc.view))
{
- if (ls.file[i].name[0] == char0
- && strcmp (ls.file[i].name + 1, file + 1) == 0)
+ struct line_entry *h2;
+ /* Reverse the list to avoid quadratic behavior going backwards
+ in a single-linked list. */
+ struct line_entry *r = reverse_line_entry_list (h);
+
+ gas_assert (r == p);
+ /* Set or check views until we find a defined or absent view. */
+ do
{
- ls.last_filename = i;
- return i + 1;
+ /* Do not define the head of a (sub?)segment view while
+ handling others. It would be defined too early, without
+ regard to the last view of other subsegments.
+ set_or_check_view will be called for every head segment
+ that needs it. */
+ if (r == h)
+ break;
+ set_or_check_view (r, r->next, NULL);
}
- }
+ while (r->next && r->next->loc.view && !S_IS_DEFINED (r->next->loc.view)
+ && (r = r->next));
- /* No match, enter new filename. */
- if (ls.num_filenames >= ls.filename_len)
- {
- ls.filename_len += 13;
- ls.file = xrealloc (ls.file, ls.filename_len * sizeof (ls.file[0]));
+ /* Unreverse the list, so that we can go forward again. */
+ h2 = reverse_line_entry_list (p);
+ gas_assert (h2 == h);
+
+ /* Starting from the last view we just defined, attempt to
+ simplify the view expressions, until we do so to P. */
+ do
+ {
+ /* The head view of a subsegment may remain undefined while
+ handling other elements, before it is linked to the last
+ view of the previous subsegment. */
+ if (r == h)
+ continue;
+ gas_assert (S_IS_DEFINED (r->loc.view));
+ resolve_expression (symbol_get_value_expression (r->loc.view));
+ }
+ while (r != p && (r = r->next));
+
+ /* Now that we've defined and computed all earlier views that might
+ be needed to compute E's, attempt to simplify it. */
+ resolve_expression (symbol_get_value_expression (e->loc.view));
}
- ls.file[ls.num_filenames].dir = 0;
- ls.file[ls.num_filenames].name = file;
- ls.last_filename = ls.num_filenames;
- return ++ls.num_filenames;
}
-/* Emit an entry in the line number table if the address or line has changed.
- ADDR is relative to the current frag in the text section. */
+/* Record an entry for LOC occurring at LABEL. */
-void
-dwarf2_gen_line_info (addr, l)
- addressT addr;
- struct dwarf2_line_info *l;
+static void
+dwarf2_gen_line_info_1 (symbolS *label, struct dwarf2_line_info *loc)
{
- unsigned int filenum = l->filenum;
- unsigned int any_output = 0;
- subsegT saved_subseg;
- segT saved_seg;
- fragS *saved_frag;
+ struct line_subseg *lss;
+ struct line_entry *e;
- if (flag_debug)
- fprintf (stderr, "line: addr %lx file `%s' line %u col %u flags %x\n",
- (unsigned long) addr, l->filename, l->line, l->column, l->flags);
+ e = XNEW (struct line_entry);
+ e->next = NULL;
+ e->label = label;
+ e->loc = *loc;
- if (filenum > 0 && !l->filename)
- {
- if (filenum >= (unsigned int) ls.num_filenames)
- {
- as_warn ("Encountered bad file number in line number debug info!");
- return;
- }
- }
- else if (l->filename)
- filenum = get_filenum (filenum, l->filename);
- else
- /* No filename, no filnum => no play. */
- return;
+ lss = get_line_subseg (now_seg, now_subseg, TRUE);
- /* Must save these before the subseg_new call, as that call will change
- them. */
- saved_seg = now_seg;
- saved_subseg = now_subseg;
- saved_frag = frag_now;
+ /* Subseg heads are chained to previous subsegs in
+ dwarf2_finish. */
+ if (loc->view && lss->head)
+ set_or_check_view (e,
+ (struct line_entry *)lss->ptail,
+ lss->head);
- if (!ls.line_seg)
- {
-#ifdef BFD_ASSEMBLER
- symbolS *secsym;
-#endif
+ *lss->ptail = e;
+ lss->ptail = &e->next;
+}
- ls.line_seg = subseg_new (".debug_line", 0);
+/* Record an entry for LOC occurring at OFS within the current fragment. */
-#ifdef BFD_ASSEMBLER
- bfd_set_section_flags (stdoutput, ls.line_seg, SEC_READONLY);
+void
+dwarf2_gen_line_info (addressT ofs, struct dwarf2_line_info *loc)
+{
+ static unsigned int line = -1;
+ static unsigned int filenum = -1;
- /* We're going to need this symbol. */
- secsym = symbol_find (".debug_line");
- if (secsym != NULL)
- symbol_set_bfdsym (secsym, ls.line_seg->symbol);
- else
- symbol_table_insert (section_symbol (ls.line_seg));
-#endif
- }
+ symbolS *sym;
- subseg_set (ls.line_seg, DL_BODY);
+ /* Early out for as-yet incomplete location information. */
+ if (loc->filenum == 0 || loc->line == 0)
+ return;
- if (ls.text_seg != saved_seg || ls.text_subseg != saved_subseg)
- {
- if (!ls.sm.empty_sequence)
- {
- /* Terminate previous sequence. */
- out_end_sequence ();
- ls.sm.empty_sequence = 1;
- }
- any_output = 1;
- ls.text_seg = saved_seg;
- ls.text_subseg = saved_subseg;
- out_set_addr (addr);
- ls.sm.addr = addr;
- ls.frag = saved_frag;
- }
+ /* Don't emit sequences of line symbols for the same line when the
+ symbols apply to assembler code. It is necessary to emit
+ duplicate line symbols when a compiler asks for them, because GDB
+ uses them to determine the end of the prologue. */
+ if (debug_type == DEBUG_DWARF2
+ && line == loc->line && filenum == loc->filenum)
+ return;
- if (ls.sm.filenum != filenum)
- {
- any_output = 1;
- out_opcode (DW_LNS_set_file);
- out_uleb128 (filenum);
- ls.sm.filenum = filenum;
- }
+ line = loc->line;
+ filenum = loc->filenum;
- if (ls.sm.column != l->column)
+ if (linkrelax)
{
- any_output = 1;
- out_opcode (DW_LNS_set_column);
- out_uleb128 (l->column);
- ls.sm.column = l->column;
- }
+ char name[120];
- if (((l->flags & DWARF2_FLAG_BEGIN_STMT) != 0) != ls.sm.is_stmt)
- {
- any_output = 1;
- out_opcode (DW_LNS_negate_stmt);
+ /* Use a non-fake name for the line number location,
+ so that it can be referred to by relocations. */
+ sprintf (name, ".Loc.%u.%u", line, filenum);
+ sym = symbol_new (name, now_seg, ofs, frag_now);
}
+ else
+ sym = symbol_temp_new (now_seg, ofs, frag_now);
+ dwarf2_gen_line_info_1 (sym, loc);
+}
- if (l->flags & DWARF2_FLAG_BEGIN_BLOCK)
- {
- any_output = 1;
- out_opcode (DW_LNS_set_basic_block);
- }
+/* Returns the current source information. If .file directives have
+ been encountered, the info for the corresponding source file is
+ returned. Otherwise, the info for the assembly source file is
+ returned. */
- if (ls.sm.line != l->line)
+void
+dwarf2_where (struct dwarf2_line_info *line)
+{
+ if (debug_type == DEBUG_DWARF2)
{
- any_output = 1;
- if (saved_frag != ls.frag)
- {
- /* If a new frag got allocated (for whatever reason), then
- deal with it by generating a reference symbol. Note: no
- end_sequence needs to be generated because the address did
- not really decrease (only the reference point changed). */
- out_set_addr (addr);
- ls.sm.addr = addr;
- ls.frag = saved_frag;
- }
- gen_addr_line (l->line - ls.sm.line,
- (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH);
- ls.sm.basic_block = 0;
- ls.sm.line = l->line;
- ls.sm.addr = addr;
+ const char *filename;
+
+ memset (line, 0, sizeof (*line));
+ filename = as_where (&line->line);
+ line->filenum = get_filenum (filename, 0);
+ line->column = 0;
+ line->flags = DWARF2_FLAG_IS_STMT;
+ line->isa = current.isa;
+ line->discriminator = current.discriminator;
+ line->view = NULL;
}
+ else
+ *line = current;
+}
- subseg_set (saved_seg, saved_subseg);
+/* A hook to allow the target backend to inform the line number state
+ machine of isa changes when assembler debug info is enabled. */
- ls.num_line_entries += any_output;
- if (any_output)
- ls.sm.empty_sequence = 0;
+void
+dwarf2_set_isa (unsigned int isa)
+{
+ current.isa = isa;
}
-static void
-gen_dir_list ()
+/* Called for each machine instruction, or relatively atomic group of
+ machine instructions (ie built-in macro). The instruction or group
+ is SIZE bytes in length. If dwarf2 line number generation is called
+ for, emit a line statement appropriately. */
+
+void
+dwarf2_emit_insn (int size)
{
- char *str, *slash, *dir_list, *dp, *cp;
- int i, j, num_dirs;
+ struct dwarf2_line_info loc;
- dir_list = frag_more (0);
- num_dirs = 0;
+ if (debug_type != DEBUG_DWARF2
+ ? !dwarf2_loc_directive_seen
+ : !seen_at_least_1_file ())
+ return;
- for (i = 0; i < ls.num_filenames; ++i)
- {
- str = ls.file[i].name;
- slash = strrchr (str, '/');
- if (slash)
- {
- *slash = '\0';
- for (j = 0, dp = dir_list; j < num_dirs; ++j)
- {
- if (strcmp (str, dp) == 0)
- {
- ls.file[i].dir = j + 1;
- break;
- }
- dp += strlen (dp);
- }
- if (j >= num_dirs)
- {
- /* Didn't find this directory: append it to the list. */
- size_t size = strlen (str) + 1;
- cp = frag_more (size);
- memcpy (cp, str, size);
- ls.file[i].dir = ++num_dirs;
- }
- *slash = '/';
- ls.file[i].name = slash + 1;
- }
- }
+ dwarf2_where (&loc);
- /* Terminate directory list. */
- out_byte ('\0');
+ dwarf2_gen_line_info ((frag_now_fix_octets () - size) / OCTETS_PER_BYTE, &loc);
+ dwarf2_consume_line_info ();
}
-static void
-gen_file_list ()
+/* Move all previously-emitted line entries for the current position by
+ DELTA bytes. This function cannot be used to move the same entries
+ twice. */
+
+void
+dwarf2_move_insn (int delta)
{
- size_t size;
- char *cp;
- int i;
+ struct line_subseg *lss;
+ struct line_entry *e;
+ valueT now;
- for (i = 0; i < ls.num_filenames; ++i)
- {
- size = strlen (ls.file[i].name) + 1;
- cp = frag_more (size);
- memcpy (cp, ls.file[i].name, size);
+ if (delta == 0)
+ return;
- out_uleb128 (ls.file[i].dir); /* directory number */
- out_uleb128 (0); /* last modification timestamp */
- out_uleb128 (0); /* filesize */
- }
+ lss = get_line_subseg (now_seg, now_subseg, FALSE);
+ if (!lss)
+ return;
- /* Terminate filename list. */
- out_byte (0);
+ now = frag_now_fix ();
+ while ((e = *lss->pmove_tail))
+ {
+ if (S_GET_VALUE (e->label) == now)
+ S_SET_VALUE (e->label, now + delta);
+ lss->pmove_tail = &e->next;
+ }
}
-static void
-print_stats (total_size)
- unsigned long total_size;
+/* Called after the current line information has been either used with
+ dwarf2_gen_line_info or saved with a machine instruction for later use.
+ This resets the state of the line number information to reflect that
+ it has been used. */
+
+void
+dwarf2_consume_line_info (void)
{
- static const char *opc_name[] = {
- "extended", "copy", "advance_pc", "advance_line", "set_file",
- "set_column", "negate_stmt", "set_basic_block", "const_add_pc",
- "fixed_advance_pc"
- };
- size_t i;
- int j;
+ /* Unless we generate DWARF2 debugging information for each
+ assembler line, we only emit one line symbol for one LOC. */
+ dwarf2_loc_directive_seen = FALSE;
+
+ current.flags &= ~(DWARF2_FLAG_BASIC_BLOCK
+ | DWARF2_FLAG_PROLOGUE_END
+ | DWARF2_FLAG_EPILOGUE_BEGIN);
+ current.discriminator = 0;
+ current.view = NULL;
+}
- fprintf (stderr, "Average size: %g bytes/line\n",
- total_size / (double) ls.num_line_entries);
+/* Called for each (preferably code) label. If dwarf2_loc_mark_labels
+ is enabled, emit a basic block marker. */
- fprintf (stderr, "\nStandard opcode histogram:\n");
+void
+dwarf2_emit_label (symbolS *label)
+{
+ struct dwarf2_line_info loc;
- for (i = 0; i < sizeof (opc_name) / sizeof (opc_name[0]); ++i)
- {
- fprintf (stderr, "%s", opc_name[i]);
- for (j = strlen (opc_name[i]); j < 16; ++j)
- fprintf (stderr, " ");
- fprintf (stderr, ": %u\n", ls.opcode_hist[i]);
- }
+ if (!dwarf2_loc_mark_labels)
+ return;
+ if (S_GET_SEGMENT (label) != now_seg)
+ return;
+ if (!(bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE))
+ return;
+ if (files_in_use == 0 && debug_type != DEBUG_DWARF2)
+ return;
- fprintf (stderr, "\nSpecial opcodes:\naddr\t\t\t\tline skip\n");
+ dwarf2_where (&loc);
- fprintf (stderr, "skip: ");
- for (j = DWARF2_LINE_BASE; j < DWARF2_LINE_BASE + DWARF2_LINE_RANGE; ++j)
- fprintf (stderr, "%3d", j);
- fprintf (stderr, "\n-----");
+ loc.flags |= DWARF2_FLAG_BASIC_BLOCK;
- for (; i < 256; ++i)
- {
- j = SPECIAL_LINE (i);
- if (j == DWARF2_LINE_BASE)
- fprintf (stderr, "\n%4u: ",
- ((unsigned int)
- DWARF2_LINE_MIN_INSN_LENGTH * SPECIAL_ADDR (i)));
- fprintf (stderr, " %2u", ls.opcode_hist[i]);
- }
- fprintf (stderr, "\n");
+ dwarf2_gen_line_info_1 (label, &loc);
+ dwarf2_consume_line_info ();
}
-void
-dwarf2_finish ()
+/* Get a .debug_line file number for FILENAME. If NUM is nonzero,
+ allocate it on that file table slot, otherwise return the first
+ empty one. */
+
+static unsigned int
+get_filenum (const char *filename, unsigned int num)
{
- addressT body_size, total_size, prolog_size;
- subsegT saved_subseg;
- segT saved_seg;
- char *cp;
+ static unsigned int last_used, last_used_dir_len;
+ const char *file;
+ size_t dir_len;
+ unsigned int i, dir;
- if (!ls.line_seg)
- /* No .debug_line segment, no work to do. */
- return;
+ if (num == 0 && last_used)
+ {
+ if (! files[last_used].dir
+ && filename_cmp (filename, files[last_used].filename) == 0)
+ return last_used;
+ if (files[last_used].dir
+ && filename_ncmp (filename, dirs[files[last_used].dir],
+ last_used_dir_len) == 0
+ && IS_DIR_SEPARATOR (filename [last_used_dir_len])
+ && filename_cmp (filename + last_used_dir_len + 1,
+ files[last_used].filename) == 0)
+ return last_used;
+ }
- saved_seg = now_seg;
- saved_subseg = now_subseg;
+ file = lbasename (filename);
+ /* Don't make empty string from / or A: from A:/ . */
+#ifdef HAVE_DOS_BASED_FILE_SYSTEM
+ if (file <= filename + 3)
+ file = filename;
+#else
+ if (file == filename + 1)
+ file = filename;
+#endif
+ dir_len = file - filename;
- if (!ls.sm.empty_sequence)
- out_end_sequence ();
- total_size = body_size = frag_now_fix ();
+ dir = 0;
+ if (dir_len)
+ {
+#ifndef DWARF2_DIR_SHOULD_END_WITH_SEPARATOR
+ --dir_len;
+#endif
+ for (dir = 1; dir < dirs_in_use; ++dir)
+ if (filename_ncmp (filename, dirs[dir], dir_len) == 0
+ && dirs[dir][dir_len] == '\0')
+ break;
- /* Now generate the directory and file lists. */
- subseg_set (ls.line_seg, DL_FILES);
- gen_dir_list ();
- gen_file_list ();
- total_size += frag_now_fix ();
+ if (dir >= dirs_in_use)
+ {
+ if (dir >= dirs_allocated)
+ {
+ dirs_allocated = dir + 32;
+ dirs = XRESIZEVEC (char *, dirs, dirs_allocated);
+ }
- /* And now the header ("statement program prolog", in DWARF2 lingo...). */
- subseg_set (ls.line_seg, DL_PROLOG);
+ dirs[dir] = xmemdup0 (filename, dir_len);
+ dirs_in_use = dir + 1;
+ }
+ }
- cp = frag_more (15 + DWARF2_LINE_OPCODE_BASE - 1);
+ if (num == 0)
+ {
+ for (i = 1; i < files_in_use; ++i)
+ if (files[i].dir == dir
+ && files[i].filename
+ && filename_cmp (file, files[i].filename) == 0)
+ {
+ last_used = i;
+ last_used_dir_len = dir_len;
+ return i;
+ }
+ }
+ else
+ i = num;
- total_size += frag_now_fix ();
- prolog_size = total_size - body_size - 10;
+ if (i >= files_allocated)
+ {
+ unsigned int old = files_allocated;
-# define STUFF(val,size) md_number_to_chars (cp, val, size); cp += size;
- STUFF (total_size - 4, 4); /* length */
- STUFF (2, 2); /* version */
- STUFF (prolog_size, 4); /* prologue_length */
- STUFF (DWARF2_LINE_MIN_INSN_LENGTH, 1);
- STUFF (DWARF2_LINE_DEFAULT_IS_STMT, 1);
- STUFF (DWARF2_LINE_BASE, 1);
- STUFF (DWARF2_LINE_RANGE, 1);
- STUFF (DWARF2_LINE_OPCODE_BASE, 1);
+ files_allocated = i + 32;
+ /* Catch wraparound. */
+ if (files_allocated <= old)
+ {
+ as_bad (_("file number %lu is too big"), (unsigned long) i);
+ return 0;
+ }
- /* standard_opcode_lengths: */
- STUFF (0, 1); /* DW_LNS_copy */
- STUFF (1, 1); /* DW_LNS_advance_pc */
- STUFF (1, 1); /* DW_LNS_advance_line */
- STUFF (1, 1); /* DW_LNS_set_file */
- STUFF (1, 1); /* DW_LNS_set_column */
- STUFF (0, 1); /* DW_LNS_negate_stmt */
- STUFF (0, 1); /* DW_LNS_set_basic_block */
- STUFF (0, 1); /* DW_LNS_const_add_pc */
- STUFF (1, 1); /* DW_LNS_fixed_advance_pc */
+ files = XRESIZEVEC (struct file_entry, files, files_allocated);
+ memset (files + old, 0, (i + 32 - old) * sizeof (struct file_entry));
+ }
- subseg_set (saved_seg, saved_subseg);
+ files[i].filename = file;
+ files[i].dir = dir;
+ if (files_in_use < i + 1)
+ files_in_use = i + 1;
+ last_used = i;
+ last_used_dir_len = dir_len;
- if (flag_debug)
- print_stats (total_size);
+ return i;
}
-void
-dwarf2_directive_file (dummy)
- int dummy ATTRIBUTE_UNUSED;
+/* Handle two forms of .file directive:
+ - Pass .file "source.c" to s_app_file
+ - Handle .file 1 "source.c" by adding an entry to the DWARF-2 file table
+
+ If an entry is added to the file table, return a pointer to the filename. */
+
+char *
+dwarf2_directive_filename (void)
{
- int len;
+ valueT num;
+ char *filename;
+ int filename_len;
/* Continue to accept a bare string and pass it off. */
SKIP_WHITESPACE ();
if (*input_line_pointer == '"')
{
s_app_file (0);
- return;
+ return NULL;
}
- ls.any_dwarf2_directives = 1;
+ num = get_absolute_expression ();
+ filename = demand_copy_C_string (&filename_len);
+ if (filename == NULL)
+ return NULL;
+ demand_empty_rest_of_line ();
- if (debug_type == DEBUG_NONE)
- /* Automatically turn on DWARF2 debug info unless something else
- has been selected. */
- debug_type = DEBUG_DWARF2;
+ if ((offsetT) num < 1)
+ {
+ as_bad (_("file number less than one"));
+ return NULL;
+ }
- ls.current.filenum = get_absolute_expression ();
- ls.current.filename = demand_copy_C_string (&len);
+ /* A .file directive implies compiler generated debug information is
+ being supplied. Turn off gas generated debug info. */
+ debug_type = DEBUG_NONE;
- demand_empty_rest_of_line ();
-}
+ if (num != (unsigned int) num
+ || num >= (size_t) -1 / sizeof (struct file_entry) - 32)
+ {
+ as_bad (_("file number %lu is too big"), (unsigned long) num);
+ return NULL;
+ }
+ if (num < files_in_use && files[num].filename != 0)
+ {
+ as_bad (_("file number %u already allocated"), (unsigned int) num);
+ return NULL;
+ }
-void
-dwarf2_directive_loc (dummy)
- int dummy ATTRIBUTE_UNUSED;
-{
- ls.any_dwarf2_directives = 1;
+ get_filenum (filename, (unsigned int) num);
- ls.current.filenum = get_absolute_expression ();
- SKIP_WHITESPACE ();
- ls.current.line = get_absolute_expression ();
- SKIP_WHITESPACE ();
- ls.current.column = get_absolute_expression ();
- demand_empty_rest_of_line ();
+ return filename;
+}
- ls.current.flags = DWARF2_FLAG_BEGIN_STMT;
+/* Calls dwarf2_directive_filename, but discards its result.
+ Used in pseudo-op tables where the function result is ignored. */
-#ifndef NO_LISTING
- if (listing)
- listing_source_line (ls.current.line);
-#endif
+void
+dwarf2_directive_file (int dummy ATTRIBUTE_UNUSED)
+{
+ (void) dwarf2_directive_filename ();
}
void
-dwarf2_where (line)
- struct dwarf2_line_info *line;
+dwarf2_directive_loc (int dummy ATTRIBUTE_UNUSED)
{
- if (ls.any_dwarf2_directives)
- *line = ls.current;
- else
- {
- as_where (&line->filename, &line->line);
- line->filenum = 0;
- line->column = 0;
- line->flags = DWARF2_FLAG_BEGIN_STMT;
+ offsetT filenum, line;
+
+ /* If we see two .loc directives in a row, force the first one to be
+ output now. */
+ if (dwarf2_loc_directive_seen)
+ dwarf2_emit_insn (0);
+
+ filenum = get_absolute_expression ();
+ SKIP_WHITESPACE ();
+ line = get_absolute_expression ();
+
+ if (filenum < 1)
+ {
+ as_bad (_("file number less than one"));
+ return;
+ }
+ if (filenum >= (int) files_in_use || files[filenum].filename == 0)
+ {
+ as_bad (_("unassigned file number %ld"), (long) filenum);
+ return;
+ }
+
+ current.filenum = filenum;
+ current.line = line;
+ current.discriminator = 0;
+
+#ifndef NO_LISTING
+ if (listing)
+ {
+ if (files[filenum].dir)
+ {
+ size_t dir_len = strlen (dirs[files[filenum].dir]);
+ size_t file_len = strlen (files[filenum].filename);
+ char *cp = XNEWVEC (char, dir_len + 1 + file_len + 1);
+
+ memcpy (cp, dirs[files[filenum].dir], dir_len);
+ INSERT_DIR_SEPARATOR (cp, dir_len);
+ memcpy (cp + dir_len + 1, files[filenum].filename, file_len);
+ cp[dir_len + file_len + 1] = '\0';
+ listing_source_file (cp);
+ free (cp);
+ }
+ else
+ listing_source_file (files[filenum].filename);
+ listing_source_line (line);
+ }
+#endif
+
+ SKIP_WHITESPACE ();
+ if (ISDIGIT (*input_line_pointer))
+ {
+ current.column = get_absolute_expression ();
+ SKIP_WHITESPACE ();
+ }
+
+ while (ISALPHA (*input_line_pointer))
+ {
+ char *p, c;
+ offsetT value;
+
+ c = get_symbol_name (& p);
+
+ if (strcmp (p, "basic_block") == 0)
+ {
+ current.flags |= DWARF2_FLAG_BASIC_BLOCK;
+ *input_line_pointer = c;
+ }
+ else if (strcmp (p, "prologue_end") == 0)
+ {
+ current.flags |= DWARF2_FLAG_PROLOGUE_END;
+ *input_line_pointer = c;
+ }
+ else if (strcmp (p, "epilogue_begin") == 0)
+ {
+ current.flags |= DWARF2_FLAG_EPILOGUE_BEGIN;
+ *input_line_pointer = c;
+ }
+ else if (strcmp (p, "is_stmt") == 0)
+ {
+ (void) restore_line_pointer (c);
+ value = get_absolute_expression ();
+ if (value == 0)
+ current.flags &= ~DWARF2_FLAG_IS_STMT;
+ else if (value == 1)
+ current.flags |= DWARF2_FLAG_IS_STMT;
+ else
+ {
+ as_bad (_("is_stmt value not 0 or 1"));
+ return;
+ }
+ }
+ else if (strcmp (p, "isa") == 0)
+ {
+ (void) restore_line_pointer (c);
+ value = get_absolute_expression ();
+ if (value >= 0)
+ current.isa = value;
+ else
+ {
+ as_bad (_("isa number less than zero"));
+ return;
+ }
+ }
+ else if (strcmp (p, "discriminator") == 0)
+ {
+ (void) restore_line_pointer (c);
+ value = get_absolute_expression ();
+ if (value >= 0)
+ current.discriminator = value;
+ else
+ {
+ as_bad (_("discriminator less than zero"));
+ return;
+ }
+ }
+ else if (strcmp (p, "view") == 0)
+ {
+ symbolS *sym;
+
+ (void) restore_line_pointer (c);
+ SKIP_WHITESPACE ();
+
+ if (ISDIGIT (*input_line_pointer)
+ || *input_line_pointer == '-')
+ {
+ bfd_boolean force_reset = *input_line_pointer == '-';
+
+ value = get_absolute_expression ();
+ if (value != 0)
+ {
+ as_bad (_("numeric view can only be asserted to zero"));
+ return;
+ }
+ if (force_reset && force_reset_view)
+ sym = force_reset_view;
+ else
+ {
+ sym = symbol_temp_new (absolute_section, value,
+ &zero_address_frag);
+ if (force_reset)
+ force_reset_view = sym;
+ }
+ }
+ else
+ {
+ char *name = read_symbol_name ();
+
+ if (!name)
+ return;
+ sym = symbol_find_or_make (name);
+ if (S_IS_DEFINED (sym) || symbol_equated_p (sym))
+ {
+ if (S_IS_VOLATILE (sym))
+ sym = symbol_clone (sym, 1);
+ else if (!S_CAN_BE_REDEFINED (sym))
+ {
+ as_bad (_("symbol `%s' is already defined"), name);
+ return;
+ }
+ }
+ S_SET_SEGMENT (sym, undefined_section);
+ S_SET_VALUE (sym, 0);
+ symbol_set_frag (sym, &zero_address_frag);
+ }
+ current.view = sym;
+ }
+ else
+ {
+ as_bad (_("unknown .loc sub-directive `%s'"), p);
+ (void) restore_line_pointer (c);
+ return;
+ }
+
+ SKIP_WHITESPACE_AFTER_NAME ();
+ }
+
+ demand_empty_rest_of_line ();
+ dwarf2_loc_directive_seen = TRUE;
+ debug_type = DEBUG_NONE;
+
+ /* If we were given a view id, emit the row right away. */
+ if (current.view)
+ dwarf2_emit_insn (0);
+}
+
+void
+dwarf2_directive_loc_mark_labels (int dummy ATTRIBUTE_UNUSED)
+{
+ offsetT value = get_absolute_expression ();
+
+ if (value != 0 && value != 1)
+ {
+ as_bad (_("expected 0 or 1"));
+ ignore_rest_of_line ();
+ }
+ else
+ {
+ dwarf2_loc_mark_labels = value != 0;
+ demand_empty_rest_of_line ();
+ }
+}
+\f
+static struct frag *
+first_frag_for_seg (segT seg)
+{
+ return seg_info (seg)->frchainP->frch_root;
+}
+
+static struct frag *
+last_frag_for_seg (segT seg)
+{
+ frchainS *f = seg_info (seg)->frchainP;
+
+ while (f->frch_next != NULL)
+ f = f->frch_next;
+
+ return f->frch_last;
+}
+\f
+/* Emit a single byte into the current segment. */
+
+static inline void
+out_byte (int byte)
+{
+ FRAG_APPEND_1_CHAR (byte);
+}
+
+/* Emit a statement program opcode into the current segment. */
+
+static inline void
+out_opcode (int opc)
+{
+ out_byte (opc);
+}
+
+/* Emit a two-byte word into the current segment. */
+
+static inline void
+out_two (int data)
+{
+ md_number_to_chars (frag_more (2), data, 2);
+}
+
+/* Emit a four byte word into the current segment. */
+
+static inline void
+out_four (int data)
+{
+ md_number_to_chars (frag_more (4), data, 4);
+}
+
+/* Emit an unsigned "little-endian base 128" number. */
+
+static void
+out_uleb128 (addressT value)
+{
+ output_leb128 (frag_more (sizeof_leb128 (value, 0)), value, 0);
+}
+
+/* Emit a signed "little-endian base 128" number. */
+
+static void
+out_leb128 (addressT value)
+{
+ output_leb128 (frag_more (sizeof_leb128 (value, 1)), value, 1);
+}
+
+/* Emit a tuple for .debug_abbrev. */
+
+static inline void
+out_abbrev (int name, int form)
+{
+ out_uleb128 (name);
+ out_uleb128 (form);
+}
+
+/* Get the size of a fragment. */
+
+static offsetT
+get_frag_fix (fragS *frag, segT seg)
+{
+ frchainS *fr;
+
+ if (frag->fr_next)
+ return frag->fr_fix;
+
+ /* If a fragment is the last in the chain, special measures must be
+ taken to find its size before relaxation, since it may be pending
+ on some subsegment chain. */
+ for (fr = seg_info (seg)->frchainP; fr; fr = fr->frch_next)
+ if (fr->frch_last == frag)
+ return (char *) obstack_next_free (&fr->frch_obstack) - frag->fr_literal;
+
+ abort ();
+}
+
+/* Set an absolute address (may result in a relocation entry). */
+
+static void
+out_inc_line_addr (int line_delta, addressT addr_delta);
+
+static void
+out_set_addr (symbolS *sym)
+{
+ expressionS exp;
+ addressT expr_addr, expr_addr_aligned;
+
+ memset (&exp, 0, sizeof exp);
+
+ /* The expression at the bottom must be aligned to OCTETS_PER_BYTE. The
+ statements after the for loop will contribute 3 more octets. */
+ expr_addr = frag_now_fix_octets () + 3;
+ expr_addr_aligned = (expr_addr + OCTETS_PER_BYTE - 1) & -OCTETS_PER_BYTE;
+ for ( ; expr_addr != expr_addr_aligned; expr_addr++)
+ out_inc_line_addr (0, 0); /* NOP */
+
+ out_opcode (DW_LNS_extended_op); /* 1 octet */
+ out_uleb128 (sizeof_address + 1); /* 1 octet */
+
+ out_opcode (DW_LNE_set_address); /* 1 octet */
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = sym;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_address);
+}
+
+static void scale_addr_delta (addressT *);
+
+static void
+scale_addr_delta (addressT *addr_delta)
+{
+ static int printed_this = 0;
+ if (DWARF2_LINE_MIN_INSN_LENGTH > 1)
+ {
+ if (*addr_delta % DWARF2_LINE_MIN_INSN_LENGTH != 0 && !printed_this)
+ {
+ as_bad("unaligned opcodes detected in executable segment");
+ printed_this = 1;
+ }
+ *addr_delta /= DWARF2_LINE_MIN_INSN_LENGTH;
+ }
+}
+
+/* Encode a pair of line and address skips as efficiently as possible.
+ Note that the line skip is signed, whereas the address skip is unsigned.
+
+ The following two routines *must* be kept in sync. This is
+ enforced by making emit_inc_line_addr abort if we do not emit
+ exactly the expected number of bytes. */
+
+static int
+size_inc_line_addr (int line_delta, addressT addr_delta)
+{
+ unsigned int tmp, opcode;
+ int len = 0;
+
+ /* Scale the address delta by the minimum instruction length. */
+ scale_addr_delta (&addr_delta);
+
+ /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.
+ We cannot use special opcodes here, since we want the end_sequence
+ to emit the matrix entry. */
+ if (line_delta == INT_MAX)
+ {
+ if (addr_delta == MAX_SPECIAL_ADDR_DELTA)
+ len = 1;
+ else if (addr_delta)
+ len = 1 + sizeof_leb128 (addr_delta, 0);
+ return len + 3;
+ }
+
+ /* Bias the line delta by the base. */
+ tmp = line_delta - DWARF2_LINE_BASE;
+
+ /* If the line increment is out of range of a special opcode, we
+ must encode it with DW_LNS_advance_line. */
+ if (tmp >= DWARF2_LINE_RANGE)
+ {
+ len = 1 + sizeof_leb128 (line_delta, 1);
+ line_delta = 0;
+ tmp = 0 - DWARF2_LINE_BASE;
+ }
+
+ /* Bias the opcode by the special opcode base. */
+ tmp += DWARF2_LINE_OPCODE_BASE;
+
+ /* Avoid overflow when addr_delta is large. */
+ if (addr_delta < 256 + MAX_SPECIAL_ADDR_DELTA)
+ {
+ /* Try using a special opcode. */
+ opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
+ if (opcode <= 255)
+ return len + 1;
+
+ /* Try using DW_LNS_const_add_pc followed by special op. */
+ opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
+ if (opcode <= 255)
+ return len + 2;
+ }
+
+ /* Otherwise use DW_LNS_advance_pc. */
+ len += 1 + sizeof_leb128 (addr_delta, 0);
+
+ /* DW_LNS_copy or special opcode. */
+ len += 1;
+
+ return len;
+}
+
+static void
+emit_inc_line_addr (int line_delta, addressT addr_delta, char *p, int len)
+{
+ unsigned int tmp, opcode;
+ int need_copy = 0;
+ char *end = p + len;
+
+ /* Line number sequences cannot go backward in addresses. This means
+ we've incorrectly ordered the statements in the sequence. */
+ gas_assert ((offsetT) addr_delta >= 0);
+
+ /* Scale the address delta by the minimum instruction length. */
+ scale_addr_delta (&addr_delta);
+
+ /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence.
+ We cannot use special opcodes here, since we want the end_sequence
+ to emit the matrix entry. */
+ if (line_delta == INT_MAX)
+ {
+ if (addr_delta == MAX_SPECIAL_ADDR_DELTA)
+ *p++ = DW_LNS_const_add_pc;
+ else if (addr_delta)
+ {
+ *p++ = DW_LNS_advance_pc;
+ p += output_leb128 (p, addr_delta, 0);
+ }
+
+ *p++ = DW_LNS_extended_op;
+ *p++ = 1;
+ *p++ = DW_LNE_end_sequence;
+ goto done;
+ }
+
+ /* Bias the line delta by the base. */
+ tmp = line_delta - DWARF2_LINE_BASE;
+
+ /* If the line increment is out of range of a special opcode, we
+ must encode it with DW_LNS_advance_line. */
+ if (tmp >= DWARF2_LINE_RANGE)
+ {
+ *p++ = DW_LNS_advance_line;
+ p += output_leb128 (p, line_delta, 1);
+
+ line_delta = 0;
+ tmp = 0 - DWARF2_LINE_BASE;
+ need_copy = 1;
+ }
+
+ /* Prettier, I think, to use DW_LNS_copy instead of a "line +0, addr +0"
+ special opcode. */
+ if (line_delta == 0 && addr_delta == 0)
+ {
+ *p++ = DW_LNS_copy;
+ goto done;
+ }
+
+ /* Bias the opcode by the special opcode base. */
+ tmp += DWARF2_LINE_OPCODE_BASE;
+
+ /* Avoid overflow when addr_delta is large. */
+ if (addr_delta < 256 + MAX_SPECIAL_ADDR_DELTA)
+ {
+ /* Try using a special opcode. */
+ opcode = tmp + addr_delta * DWARF2_LINE_RANGE;
+ if (opcode <= 255)
+ {
+ *p++ = opcode;
+ goto done;
+ }
+
+ /* Try using DW_LNS_const_add_pc followed by special op. */
+ opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA) * DWARF2_LINE_RANGE;
+ if (opcode <= 255)
+ {
+ *p++ = DW_LNS_const_add_pc;
+ *p++ = opcode;
+ goto done;
+ }
+ }
+
+ /* Otherwise use DW_LNS_advance_pc. */
+ *p++ = DW_LNS_advance_pc;
+ p += output_leb128 (p, addr_delta, 0);
+
+ if (need_copy)
+ *p++ = DW_LNS_copy;
+ else
+ *p++ = tmp;
+
+ done:
+ gas_assert (p == end);
+}
+
+/* Handy routine to combine calls to the above two routines. */
+
+static void
+out_inc_line_addr (int line_delta, addressT addr_delta)
+{
+ int len = size_inc_line_addr (line_delta, addr_delta);
+ emit_inc_line_addr (line_delta, addr_delta, frag_more (len), len);
+}
+
+/* Write out an alternative form of line and address skips using
+ DW_LNS_fixed_advance_pc opcodes. This uses more space than the default
+ line and address information, but it is required if linker relaxation
+ could change the code offsets. The following two routines *must* be
+ kept in sync. */
+#define ADDR_DELTA_LIMIT 50000
+
+static int
+size_fixed_inc_line_addr (int line_delta, addressT addr_delta)
+{
+ int len = 0;
+
+ /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence. */
+ if (line_delta != INT_MAX)
+ len = 1 + sizeof_leb128 (line_delta, 1);
+
+ if (addr_delta > ADDR_DELTA_LIMIT)
+ {
+ /* DW_LNS_extended_op */
+ len += 1 + sizeof_leb128 (sizeof_address + 1, 0);
+ /* DW_LNE_set_address */
+ len += 1 + sizeof_address;
+ }
+ else
+ /* DW_LNS_fixed_advance_pc */
+ len += 3;
+
+ if (line_delta == INT_MAX)
+ /* DW_LNS_extended_op + DW_LNE_end_sequence */
+ len += 3;
+ else
+ /* DW_LNS_copy */
+ len += 1;
+
+ return len;
+}
+
+static void
+emit_fixed_inc_line_addr (int line_delta, addressT addr_delta, fragS *frag,
+ char *p, int len)
+{
+ expressionS *pexp;
+ char *end = p + len;
+
+ /* Line number sequences cannot go backward in addresses. This means
+ we've incorrectly ordered the statements in the sequence. */
+ gas_assert ((offsetT) addr_delta >= 0);
+
+ /* Verify that we have kept in sync with size_fixed_inc_line_addr. */
+ gas_assert (len == size_fixed_inc_line_addr (line_delta, addr_delta));
+
+ /* INT_MAX is a signal that this is actually a DW_LNE_end_sequence. */
+ if (line_delta != INT_MAX)
+ {
+ *p++ = DW_LNS_advance_line;
+ p += output_leb128 (p, line_delta, 1);
+ }
+
+ pexp = symbol_get_value_expression (frag->fr_symbol);
+
+ /* The DW_LNS_fixed_advance_pc opcode has a 2-byte operand so it can
+ advance the address by at most 64K. Linker relaxation (without
+ which this function would not be used) could change the operand by
+ an unknown amount. If the address increment is getting close to
+ the limit, just reset the address. */
+ if (addr_delta > ADDR_DELTA_LIMIT)
+ {
+ symbolS *to_sym;
+ expressionS exp;
+
+ memset (&exp, 0, sizeof exp);
+ gas_assert (pexp->X_op == O_subtract);
+ to_sym = pexp->X_add_symbol;
+
+ *p++ = DW_LNS_extended_op;
+ p += output_leb128 (p, sizeof_address + 1, 0);
+ *p++ = DW_LNE_set_address;
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = to_sym;
+ exp.X_add_number = 0;
+ emit_expr_fix (&exp, sizeof_address, frag, p, TC_PARSE_CONS_RETURN_NONE);
+ p += sizeof_address;
+ }
+ else
+ {
+ *p++ = DW_LNS_fixed_advance_pc;
+ emit_expr_fix (pexp, 2, frag, p, TC_PARSE_CONS_RETURN_NONE);
+ p += 2;
+ }
+
+ if (line_delta == INT_MAX)
+ {
+ *p++ = DW_LNS_extended_op;
+ *p++ = 1;
+ *p++ = DW_LNE_end_sequence;
+ }
+ else
+ *p++ = DW_LNS_copy;
+
+ gas_assert (p == end);
+}
+
+/* Generate a variant frag that we can use to relax address/line
+ increments between fragments of the target segment. */
+
+static void
+relax_inc_line_addr (int line_delta, symbolS *to_sym, symbolS *from_sym)
+{
+ expressionS exp;
+ int max_chars;
+
+ memset (&exp, 0, sizeof exp);
+ exp.X_op = O_subtract;
+ exp.X_add_symbol = to_sym;
+ exp.X_op_symbol = from_sym;
+ exp.X_add_number = 0;
+
+ /* The maximum size of the frag is the line delta with a maximum
+ sized address delta. */
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ max_chars = size_fixed_inc_line_addr (line_delta,
+ -DWARF2_LINE_MIN_INSN_LENGTH);
+ else
+ max_chars = size_inc_line_addr (line_delta, -DWARF2_LINE_MIN_INSN_LENGTH);
+
+ frag_var (rs_dwarf2dbg, max_chars, max_chars, 1,
+ make_expr_symbol (&exp), line_delta, NULL);
+}
+
+/* The function estimates the size of a rs_dwarf2dbg variant frag
+ based on the current values of the symbols. It is called before
+ the relaxation loop. We set fr_subtype to the expected length. */
+
+int
+dwarf2dbg_estimate_size_before_relax (fragS *frag)
+{
+ offsetT addr_delta;
+ int size;
+
+ addr_delta = resolve_symbol_value (frag->fr_symbol);
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ size = size_fixed_inc_line_addr (frag->fr_offset, addr_delta);
+ else
+ size = size_inc_line_addr (frag->fr_offset, addr_delta);
+
+ frag->fr_subtype = size;
+
+ return size;
+}
+
+/* This function relaxes a rs_dwarf2dbg variant frag based on the
+ current values of the symbols. fr_subtype is the current length
+ of the frag. This returns the change in frag length. */
+
+int
+dwarf2dbg_relax_frag (fragS *frag)
+{
+ int old_size, new_size;
+
+ old_size = frag->fr_subtype;
+ new_size = dwarf2dbg_estimate_size_before_relax (frag);
+
+ return new_size - old_size;
+}
+
+/* This function converts a rs_dwarf2dbg variant frag into a normal
+ fill frag. This is called after all relaxation has been done.
+ fr_subtype will be the desired length of the frag. */
+
+void
+dwarf2dbg_convert_frag (fragS *frag)
+{
+ offsetT addr_diff;
+
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ {
+ /* If linker relaxation is enabled then the distance between the two
+ symbols in the frag->fr_symbol expression might change. Hence we
+ cannot rely upon the value computed by resolve_symbol_value.
+ Instead we leave the expression unfinalized and allow
+ emit_fixed_inc_line_addr to create a fixup (which later becomes a
+ relocation) that will allow the linker to correctly compute the
+ actual address difference. We have to use a fixed line advance for
+ this as we cannot (easily) relocate leb128 encoded values. */
+ int saved_finalize_syms = finalize_syms;
+
+ finalize_syms = 0;
+ addr_diff = resolve_symbol_value (frag->fr_symbol);
+ finalize_syms = saved_finalize_syms;
+ }
+ else
+ addr_diff = resolve_symbol_value (frag->fr_symbol);
+
+ /* fr_var carries the max_chars that we created the fragment with.
+ fr_subtype carries the current expected length. We must, of
+ course, have allocated enough memory earlier. */
+ gas_assert (frag->fr_var >= (int) frag->fr_subtype);
+
+ if (DWARF2_USE_FIXED_ADVANCE_PC)
+ emit_fixed_inc_line_addr (frag->fr_offset, addr_diff, frag,
+ frag->fr_literal + frag->fr_fix,
+ frag->fr_subtype);
+ else
+ emit_inc_line_addr (frag->fr_offset, addr_diff,
+ frag->fr_literal + frag->fr_fix, frag->fr_subtype);
+
+ frag->fr_fix += frag->fr_subtype;
+ frag->fr_type = rs_fill;
+ frag->fr_var = 0;
+ frag->fr_offset = 0;
+}
+
+/* Generate .debug_line content for the chain of line number entries
+ beginning at E, for segment SEG. */
+
+static void
+process_entries (segT seg, struct line_entry *e)
+{
+ unsigned filenum = 1;
+ unsigned line = 1;
+ unsigned column = 0;
+ unsigned isa = 0;
+ unsigned flags = DWARF2_LINE_DEFAULT_IS_STMT ? DWARF2_FLAG_IS_STMT : 0;
+ fragS *last_frag = NULL, *frag;
+ addressT last_frag_ofs = 0, frag_ofs;
+ symbolS *last_lab = NULL, *lab;
+ struct line_entry *next;
+
+ if (flag_dwarf_sections)
+ {
+ char * name;
+ const char * sec_name;
+
+ /* Switch to the relevant sub-section before we start to emit
+ the line number table.
+
+ FIXME: These sub-sections do not have a normal Line Number
+ Program Header, thus strictly speaking they are not valid
+ DWARF sections. Unfortunately the DWARF standard assumes
+ a one-to-one relationship between compilation units and
+ line number tables. Thus we have to have a .debug_line
+ section, as well as our sub-sections, and we have to ensure
+ that all of the sub-sections are merged into a proper
+ .debug_line section before a debugger sees them. */
+
+ sec_name = bfd_get_section_name (stdoutput, seg);
+ if (strcmp (sec_name, ".text") != 0)
+ {
+ name = concat (".debug_line", sec_name, (char *) NULL);
+ subseg_set (subseg_get (name, FALSE), 0);
+ }
+ else
+ /* Don't create a .debug_line.text section -
+ that is redundant. Instead just switch back to the
+ normal .debug_line section. */
+ subseg_set (subseg_get (".debug_line", FALSE), 0);
+ }
+
+ do
+ {
+ int line_delta;
+
+ if (filenum != e->loc.filenum)
+ {
+ filenum = e->loc.filenum;
+ out_opcode (DW_LNS_set_file);
+ out_uleb128 (filenum);
+ }
+
+ if (column != e->loc.column)
+ {
+ column = e->loc.column;
+ out_opcode (DW_LNS_set_column);
+ out_uleb128 (column);
+ }
+
+ if (e->loc.discriminator != 0)
+ {
+ out_opcode (DW_LNS_extended_op);
+ out_leb128 (1 + sizeof_leb128 (e->loc.discriminator, 0));
+ out_opcode (DW_LNE_set_discriminator);
+ out_uleb128 (e->loc.discriminator);
+ }
+
+ if (isa != e->loc.isa)
+ {
+ isa = e->loc.isa;
+ out_opcode (DW_LNS_set_isa);
+ out_uleb128 (isa);
+ }
+
+ if ((e->loc.flags ^ flags) & DWARF2_FLAG_IS_STMT)
+ {
+ flags = e->loc.flags;
+ out_opcode (DW_LNS_negate_stmt);
+ }
+
+ if (e->loc.flags & DWARF2_FLAG_BASIC_BLOCK)
+ out_opcode (DW_LNS_set_basic_block);
+
+ if (e->loc.flags & DWARF2_FLAG_PROLOGUE_END)
+ out_opcode (DW_LNS_set_prologue_end);
+
+ if (e->loc.flags & DWARF2_FLAG_EPILOGUE_BEGIN)
+ out_opcode (DW_LNS_set_epilogue_begin);
+
+ /* Don't try to optimize away redundant entries; gdb wants two
+ entries for a function where the code starts on the same line as
+ the {, and there's no way to identify that case here. Trust gcc
+ to optimize appropriately. */
+ line_delta = e->loc.line - line;
+ lab = e->label;
+ frag = symbol_get_frag (lab);
+ frag_ofs = S_GET_VALUE (lab);
+
+ if (last_frag == NULL
+ || (e->loc.view == force_reset_view && force_reset_view
+ /* If we're going to reset the view, but we know we're
+ advancing the PC, we don't have to force with
+ set_address. We know we do when we're at the same
+ address of the same frag, and we know we might when
+ we're in the beginning of a frag, and we were at the
+ end of the previous frag. */
+ && (frag == last_frag
+ ? (last_frag_ofs == frag_ofs)
+ : (frag_ofs == 0
+ && ((offsetT)last_frag_ofs
+ >= get_frag_fix (last_frag, seg))))))
+ {
+ out_set_addr (lab);
+ out_inc_line_addr (line_delta, 0);
+ }
+ else if (frag == last_frag && ! DWARF2_USE_FIXED_ADVANCE_PC)
+ out_inc_line_addr (line_delta, frag_ofs - last_frag_ofs);
+ else
+ relax_inc_line_addr (line_delta, lab, last_lab);
+
+ line = e->loc.line;
+ last_lab = lab;
+ last_frag = frag;
+ last_frag_ofs = frag_ofs;
+
+ next = e->next;
+ free (e);
+ e = next;
+ }
+ while (e);
+
+ /* Emit a DW_LNE_end_sequence for the end of the section. */
+ frag = last_frag_for_seg (seg);
+ frag_ofs = get_frag_fix (frag, seg);
+ if (frag == last_frag && ! DWARF2_USE_FIXED_ADVANCE_PC)
+ out_inc_line_addr (INT_MAX, frag_ofs - last_frag_ofs);
+ else
+ {
+ lab = symbol_temp_new (seg, frag_ofs, frag);
+ relax_inc_line_addr (INT_MAX, lab, last_lab);
+ }
+}
+
+/* Emit the directory and file tables for .debug_line. */
+
+static void
+out_file_list (void)
+{
+ size_t size;
+ const char *dir;
+ char *cp;
+ unsigned int i;
+
+ /* Emit directory list. */
+ for (i = 1; i < dirs_in_use; ++i)
+ {
+ dir = remap_debug_filename (dirs[i]);
+ size = strlen (dir) + 1;
+ cp = frag_more (size);
+ memcpy (cp, dir, size);
+ }
+ /* Terminate it. */
+ out_byte ('\0');
+
+ for (i = 1; i < files_in_use; ++i)
+ {
+ const char *fullfilename;
+
+ if (files[i].filename == NULL)
+ {
+ as_bad (_("unassigned file number %ld"), (long) i);
+ /* Prevent a crash later, particularly for file 1. */
+ files[i].filename = "";
+ continue;
+ }
+
+ fullfilename = DWARF2_FILE_NAME (files[i].filename,
+ files[i].dir ? dirs [files [i].dir] : "");
+ size = strlen (fullfilename) + 1;
+ cp = frag_more (size);
+ memcpy (cp, fullfilename, size);
+
+ out_uleb128 (files[i].dir); /* directory number */
+ /* Output the last modification timestamp. */
+ out_uleb128 (DWARF2_FILE_TIME_NAME (files[i].filename,
+ files[i].dir ? dirs [files [i].dir] : ""));
+ /* Output the filesize. */
+ out_uleb128 (DWARF2_FILE_SIZE_NAME (files[i].filename,
+ files[i].dir ? dirs [files [i].dir] : ""));
+ }
+
+ /* Terminate filename list. */
+ out_byte (0);
+}
+
+/* Switch to SEC and output a header length field. Return the size of
+ offsets used in SEC. The caller must set EXPR->X_add_symbol value
+ to the end of the section. EXPR->X_add_number will be set to the
+ negative size of the header. */
+
+static int
+out_header (asection *sec, expressionS *exp)
+{
+ symbolS *start_sym;
+ symbolS *end_sym;
+
+ subseg_set (sec, 0);
+
+ if (flag_dwarf_sections)
+ {
+ /* If we are going to put the start and end symbols in different
+ sections, then we need real symbols, not just fake, local ones. */
+ frag_now_fix ();
+ start_sym = symbol_make (".Ldebug_line_start");
+ end_sym = symbol_make (".Ldebug_line_end");
+ symbol_set_value_now (start_sym);
+ }
+ else
+ {
+ start_sym = symbol_temp_new_now_octets ();
+ end_sym = symbol_temp_make ();
+ }
+
+ /* Total length of the information. */
+ exp->X_op = O_subtract;
+ exp->X_add_symbol = end_sym;
+ exp->X_op_symbol = start_sym;
+
+ switch (DWARF2_FORMAT (sec))
+ {
+ case dwarf2_format_32bit:
+ exp->X_add_number = -4;
+ emit_expr (exp, 4);
+ return 4;
+
+ case dwarf2_format_64bit:
+ exp->X_add_number = -12;
+ out_four (-1);
+ emit_expr (exp, 8);
+ return 8;
+
+ case dwarf2_format_64bit_irix:
+ exp->X_add_number = -8;
+ emit_expr (exp, 8);
+ return 8;
+ }
+
+ as_fatal (_("internal error: unknown dwarf2 format"));
+ return 0;
+}
+
+/* Emit the collected .debug_line data. */
+
+static void
+out_debug_line (segT line_seg)
+{
+ expressionS exp;
+ symbolS *prologue_start, *prologue_end;
+ symbolS *line_end;
+ struct line_seg *s;
+ int sizeof_offset;
+ addressT section_end, section_end_aligned;
+
+ memset (&exp, 0, sizeof exp);
+ sizeof_offset = out_header (line_seg, &exp);
+ line_end = exp.X_add_symbol;
+
+ /* Version. */
+ out_two (DWARF2_LINE_VERSION);
+
+ /* Length of the prologue following this length. */
+ prologue_start = symbol_temp_make ();
+ prologue_end = symbol_temp_make ();
+ exp.X_op = O_subtract;
+ exp.X_add_symbol = prologue_end;
+ exp.X_op_symbol = prologue_start;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_offset);
+ symbol_set_value_now_octets (prologue_start);
+
+ /* Parameters of the state machine. */
+ out_byte (DWARF2_LINE_MIN_INSN_LENGTH);
+ out_byte (DWARF2_LINE_DEFAULT_IS_STMT);
+ out_byte (DWARF2_LINE_BASE);
+ out_byte (DWARF2_LINE_RANGE);
+ out_byte (DWARF2_LINE_OPCODE_BASE);
+
+ /* Standard opcode lengths. */
+ out_byte (0); /* DW_LNS_copy */
+ out_byte (1); /* DW_LNS_advance_pc */
+ out_byte (1); /* DW_LNS_advance_line */
+ out_byte (1); /* DW_LNS_set_file */
+ out_byte (1); /* DW_LNS_set_column */
+ out_byte (0); /* DW_LNS_negate_stmt */
+ out_byte (0); /* DW_LNS_set_basic_block */
+ out_byte (0); /* DW_LNS_const_add_pc */
+ out_byte (1); /* DW_LNS_fixed_advance_pc */
+ out_byte (0); /* DW_LNS_set_prologue_end */
+ out_byte (0); /* DW_LNS_set_epilogue_begin */
+ out_byte (1); /* DW_LNS_set_isa */
+
+ out_file_list ();
+
+ symbol_set_value_now_octets (prologue_end);
+
+ /* For each section, emit a statement program. */
+ for (s = all_segs; s; s = s->next)
+ if (SEG_NORMAL (s->seg))
+ process_entries (s->seg, s->head->head);
+ else
+ as_warn ("dwarf line number information for %s ignored",
+ segment_name (s->seg));
+
+ if (flag_dwarf_sections)
+ /* We have to switch to the special .debug_line_end section
+ before emitting the end-of-debug_line symbol. The linker
+ script arranges for this section to be placed after all the
+ (potentially garbage collected) .debug_line.<foo> sections.
+ This section contains the line_end symbol which is used to
+ compute the size of the linked .debug_line section, as seen
+ in the DWARF Line Number header. */
+ subseg_set (subseg_get (".debug_line_end", FALSE), 0);
+
+ /* Pad size of .debug_line section to a multiple of OCTETS_PER_BYTE.
+ Simply sizing the section in md_section_align() is not sufficient,
+ also the size field in the .debug_line header must be a multiple
+ of OCTETS_PER_BYTE. Not doing so will introduce gaps within the
+ .debug_line sections after linking. */
+ section_end = frag_now_fix_octets ();
+ section_end_aligned = (section_end + OCTETS_PER_BYTE - 1) & -OCTETS_PER_BYTE;
+ for ( ; section_end != section_end_aligned; section_end++)
+ out_inc_line_addr (0, 0); /* NOP */
+
+ symbol_set_value_now_octets (line_end);
+}
+
+static void
+out_debug_ranges (segT ranges_seg)
+{
+ unsigned int addr_size = sizeof_address;
+ struct line_seg *s;
+ expressionS exp;
+ unsigned int i;
+
+ memset (&exp, 0, sizeof exp);
+ subseg_set (ranges_seg, 0);
+
+ /* Base Address Entry. */
+ for (i = 0; i < addr_size; i++)
+ out_byte (0xff);
+ for (i = 0; i < addr_size; i++)
+ out_byte (0);
+
+ /* Range List Entry. */
+ for (s = all_segs; s; s = s->next)
+ {
+ fragS *frag;
+ symbolS *beg, *end;
+
+ frag = first_frag_for_seg (s->seg);
+ beg = symbol_temp_new (s->seg, 0, frag);
+ s->text_start = beg;
+
+ frag = last_frag_for_seg (s->seg);
+ end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
+ s->text_end = end;
+
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = beg;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
+
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = end;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
+ }
+
+ /* End of Range Entry. */
+ for (i = 0; i < addr_size; i++)
+ out_byte (0);
+ for (i = 0; i < addr_size; i++)
+ out_byte (0);
+}
+
+/* Emit data for .debug_aranges. */
+
+static void
+out_debug_aranges (segT aranges_seg, segT info_seg)
+{
+ unsigned int addr_size = sizeof_address;
+ offsetT size;
+ struct line_seg *s;
+ expressionS exp;
+ symbolS *aranges_end;
+ char *p;
+ int sizeof_offset;
+
+ memset (&exp, 0, sizeof exp);
+ sizeof_offset = out_header (aranges_seg, &exp);
+ aranges_end = exp.X_add_symbol;
+ size = -exp.X_add_number;
+
+ /* Version. */
+ out_two (DWARF2_ARANGES_VERSION);
+ size += 2;
+
+ /* Offset to .debug_info. */
+ TC_DWARF2_EMIT_OFFSET (section_symbol (info_seg), sizeof_offset);
+ size += sizeof_offset;
+
+ /* Size of an address (offset portion). */
+ out_byte (addr_size);
+ size++;
+
+ /* Size of a segment descriptor. */
+ out_byte (0);
+ size++;
+
+ /* Align the header. */
+ while ((size++ % (2 * addr_size)) > 0)
+ out_byte (0);
+
+ for (s = all_segs; s; s = s->next)
+ {
+ fragS *frag;
+ symbolS *beg, *end;
+
+ frag = first_frag_for_seg (s->seg);
+ beg = symbol_temp_new (s->seg, 0, frag);
+ s->text_start = beg;
+
+ frag = last_frag_for_seg (s->seg);
+ end = symbol_temp_new (s->seg, get_frag_fix (frag, s->seg), frag);
+ s->text_end = end;
+
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = beg;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
+
+ exp.X_op = O_subtract;
+ exp.X_add_symbol = end;
+ exp.X_op_symbol = beg;
+ exp.X_add_number = 0;
+ emit_expr (&exp, addr_size);
+ }
+
+ p = frag_more (2 * addr_size);
+ md_number_to_chars (p, 0, addr_size);
+ md_number_to_chars (p + addr_size, 0, addr_size);
+
+ symbol_set_value_now_octets (aranges_end);
+}
+
+/* Emit data for .debug_abbrev. Note that this must be kept in
+ sync with out_debug_info below. */
+
+static void
+out_debug_abbrev (segT abbrev_seg,
+ segT info_seg ATTRIBUTE_UNUSED,
+ segT line_seg ATTRIBUTE_UNUSED)
+{
+ subseg_set (abbrev_seg, 0);
+
+ out_uleb128 (1);
+ out_uleb128 (DW_TAG_compile_unit);
+ out_byte (DW_CHILDREN_no);
+ if (DWARF2_FORMAT (line_seg) == dwarf2_format_32bit)
+ out_abbrev (DW_AT_stmt_list, DW_FORM_data4);
+ else
+ out_abbrev (DW_AT_stmt_list, DW_FORM_data8);
+ if (all_segs->next == NULL)
+ {
+ out_abbrev (DW_AT_low_pc, DW_FORM_addr);
+ if (DWARF2_VERSION < 4)
+ out_abbrev (DW_AT_high_pc, DW_FORM_addr);
+ else
+ out_abbrev (DW_AT_high_pc, (sizeof_address == 4
+ ? DW_FORM_data4 : DW_FORM_data8));
+ }
+ else
+ {
+ if (DWARF2_FORMAT (info_seg) == dwarf2_format_32bit)
+ out_abbrev (DW_AT_ranges, DW_FORM_data4);
+ else
+ out_abbrev (DW_AT_ranges, DW_FORM_data8);
+ }
+ out_abbrev (DW_AT_name, DW_FORM_strp);
+ out_abbrev (DW_AT_comp_dir, DW_FORM_strp);
+ out_abbrev (DW_AT_producer, DW_FORM_strp);
+ out_abbrev (DW_AT_language, DW_FORM_data2);
+ out_abbrev (0, 0);
+
+ /* Terminate the abbreviations for this compilation unit. */
+ out_byte (0);
+}
+
+/* Emit a description of this compilation unit for .debug_info. */
+
+static void
+out_debug_info (segT info_seg, segT abbrev_seg, segT line_seg, segT ranges_seg,
+ symbolS *name_sym, symbolS *comp_dir_sym, symbolS *producer_sym)
+{
+ expressionS exp;
+ symbolS *info_end;
+ int sizeof_offset;
+
+ memset (&exp, 0, sizeof exp);
+ sizeof_offset = out_header (info_seg, &exp);
+ info_end = exp.X_add_symbol;
+
+ /* DWARF version. */
+ out_two (DWARF2_VERSION);
+
+ /* .debug_abbrev offset */
+ TC_DWARF2_EMIT_OFFSET (section_symbol (abbrev_seg), sizeof_offset);
+
+ /* Target address size. */
+ out_byte (sizeof_address);
+
+ /* DW_TAG_compile_unit DIE abbrev */
+ out_uleb128 (1);
+
+ /* DW_AT_stmt_list */
+ TC_DWARF2_EMIT_OFFSET (section_symbol (line_seg),
+ (DWARF2_FORMAT (line_seg) == dwarf2_format_32bit
+ ? 4 : 8));
+
+ /* These two attributes are emitted if all of the code is contiguous. */
+ if (all_segs->next == NULL)
+ {
+ /* DW_AT_low_pc */
+ exp.X_op = O_symbol;
+ exp.X_add_symbol = all_segs->text_start;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_address);
+
+ /* DW_AT_high_pc */
+ if (DWARF2_VERSION < 4)
+ exp.X_op = O_symbol;
+ else
+ {
+ exp.X_op = O_subtract;
+ exp.X_op_symbol = all_segs->text_start;
+ }
+ exp.X_add_symbol = all_segs->text_end;
+ exp.X_add_number = 0;
+ emit_expr (&exp, sizeof_address);
+ }
+ else
+ {
+ /* This attribute is emitted if the code is disjoint. */
+ /* DW_AT_ranges. */
+ TC_DWARF2_EMIT_OFFSET (section_symbol (ranges_seg), sizeof_offset);
+ }
+
+ /* DW_AT_name, DW_AT_comp_dir and DW_AT_producer. Symbols in .debug_str
+ setup in out_debug_str below. */
+ TC_DWARF2_EMIT_OFFSET (name_sym, sizeof_offset);
+ TC_DWARF2_EMIT_OFFSET (comp_dir_sym, sizeof_offset);
+ TC_DWARF2_EMIT_OFFSET (producer_sym, sizeof_offset);
+
+ /* DW_AT_language. Yes, this is probably not really MIPS, but the
+ dwarf2 draft has no standard code for assembler. */
+ out_two (DW_LANG_Mips_Assembler);
+
+ symbol_set_value_now_octets (info_end);
+}
+
+/* Emit the three debug strings needed in .debug_str and setup symbols
+ to them for use in out_debug_info. */
+static void
+out_debug_str (segT str_seg, symbolS **name_sym, symbolS **comp_dir_sym,
+ symbolS **producer_sym)
+{
+ char producer[128];
+ const char *comp_dir;
+ const char *dirname;
+ char *p;
+ int len;
+
+ subseg_set (str_seg, 0);
+
+ /* DW_AT_name. We don't have the actual file name that was present
+ on the command line, so assume files[1] is the main input file.
+ We're not supposed to get called unless at least one line number
+ entry was emitted, so this should always be defined. */
+ *name_sym = symbol_temp_new_now_octets ();
+ if (files_in_use == 0)
+ abort ();
+ if (files[1].dir)
+ {
+ dirname = remap_debug_filename (dirs[files[1].dir]);
+ len = strlen (dirname);
+#ifdef TE_VMS
+ /* Already has trailing slash. */
+ p = frag_more (len);
+ memcpy (p, dirname, len);
+#else
+ p = frag_more (len + 1);
+ memcpy (p, dirname, len);
+ INSERT_DIR_SEPARATOR (p, len);
+#endif
+ }
+ len = strlen (files[1].filename) + 1;
+ p = frag_more (len);
+ memcpy (p, files[1].filename, len);
+
+ /* DW_AT_comp_dir */
+ *comp_dir_sym = symbol_temp_new_now_octets ();
+ comp_dir = remap_debug_filename (getpwd ());
+ len = strlen (comp_dir) + 1;
+ p = frag_more (len);
+ memcpy (p, comp_dir, len);
+
+ /* DW_AT_producer */
+ *producer_sym = symbol_temp_new_now_octets ();
+ sprintf (producer, "GNU AS %s", VERSION);
+ len = strlen (producer) + 1;
+ p = frag_more (len);
+ memcpy (p, producer, len);
+}
+
+void
+dwarf2_init (void)
+{
+ last_seg_ptr = &all_segs;
+}
+
+
+/* Finish the dwarf2 debug sections. We emit .debug.line if there
+ were any .file/.loc directives, or --gdwarf2 was given, or if the
+ file has a non-empty .debug_info section and an empty .debug_line
+ section. If we emit .debug_line, and the .debug_info section is
+ empty, we also emit .debug_info, .debug_aranges and .debug_abbrev.
+ ALL_SEGS will be non-null if there were any .file/.loc directives,
+ or --gdwarf2 was given and there were any located instructions
+ emitted. */
+
+void
+dwarf2_finish (void)
+{
+ segT line_seg;
+ struct line_seg *s;
+ segT info_seg;
+ int emit_other_sections = 0;
+ int empty_debug_line = 0;
+
+ info_seg = bfd_get_section_by_name (stdoutput, ".debug_info");
+ emit_other_sections = info_seg == NULL || !seg_not_empty_p (info_seg);
+
+ line_seg = bfd_get_section_by_name (stdoutput, ".debug_line");
+ empty_debug_line = line_seg == NULL || !seg_not_empty_p (line_seg);
+
+ /* We can't construct a new debug_line section if we already have one.
+ Give an error. */
+ if (all_segs && !empty_debug_line)
+ as_fatal ("duplicate .debug_line sections");
+
+ if ((!all_segs && emit_other_sections)
+ || (!emit_other_sections && !empty_debug_line))
+ /* If there is no line information and no non-empty .debug_info
+ section, or if there is both a non-empty .debug_info and a non-empty
+ .debug_line, then we do nothing. */
+ return;
+
+ /* Calculate the size of an address for the target machine. */
+ sizeof_address = DWARF2_ADDR_SIZE (stdoutput);
+
+ /* Create and switch to the line number section. */
+ line_seg = subseg_new (".debug_line", 0);
+ bfd_set_section_flags (stdoutput, line_seg, SEC_READONLY | SEC_DEBUGGING);
+
+ /* For each subsection, chain the debug entries together. */
+ for (s = all_segs; s; s = s->next)
+ {
+ struct line_subseg *lss = s->head;
+ struct line_entry **ptail = lss->ptail;
+
+ /* Reset the initial view of the first subsection of the
+ section. */
+ if (lss->head && lss->head->loc.view)
+ set_or_check_view (lss->head, NULL, NULL);
+
+ while ((lss = lss->next) != NULL)
+ {
+ /* Link the first view of subsequent subsections to the
+ previous view. */
+ if (lss->head && lss->head->loc.view)
+ set_or_check_view (lss->head,
+ !s->head ? NULL : (struct line_entry *)ptail,
+ s->head ? s->head->head : NULL);
+ *ptail = lss->head;
+ ptail = lss->ptail;
+ }
+ }
+
+ out_debug_line (line_seg);
+
+ /* If this is assembler generated line info, and there is no
+ debug_info already, we need .debug_info, .debug_abbrev and
+ .debug_str sections as well. */
+ if (emit_other_sections)
+ {
+ segT abbrev_seg;
+ segT aranges_seg;
+ segT ranges_seg;
+ segT str_seg;
+ symbolS *name_sym, *comp_dir_sym, *producer_sym;
+
+ gas_assert (all_segs);
+
+ info_seg = subseg_new (".debug_info", 0);
+ abbrev_seg = subseg_new (".debug_abbrev", 0);
+ aranges_seg = subseg_new (".debug_aranges", 0);
+ str_seg = subseg_new (".debug_str", 0);
+
+ bfd_set_section_flags (stdoutput, info_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ bfd_set_section_flags (stdoutput, abbrev_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ bfd_set_section_flags (stdoutput, aranges_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ bfd_set_section_flags (stdoutput, str_seg,
+ (SEC_READONLY | SEC_DEBUGGING
+ | SEC_MERGE | SEC_STRINGS));
+ str_seg->entsize = 1;
+
+ record_alignment (aranges_seg, ffs (2 * sizeof_address) - 1);
+
+ if (all_segs->next == NULL)
+ ranges_seg = NULL;
+ else
+ {
+ ranges_seg = subseg_new (".debug_ranges", 0);
+ bfd_set_section_flags (stdoutput, ranges_seg,
+ SEC_READONLY | SEC_DEBUGGING);
+ record_alignment (ranges_seg, ffs (2 * sizeof_address) - 1);
+ out_debug_ranges (ranges_seg);
+ }
+
+ out_debug_aranges (aranges_seg, info_seg);
+ out_debug_abbrev (abbrev_seg, info_seg, line_seg);
+ out_debug_str (str_seg, &name_sym, &comp_dir_sym, &producer_sym);
+ out_debug_info (info_seg, abbrev_seg, line_seg, ranges_seg,
+ name_sym, comp_dir_sym, producer_sym);
+ }
+}
+
+/* Perform any deferred checks pertaining to debug information. */
+
+void
+dwarf2dbg_final_check (void)
+{
+ /* Perform reset-view checks. Don't evaluate view_assert_failed
+ recursively: it could be very deep. It's a chain of adds, with
+ each chain element pointing to the next in X_add_symbol, and
+ holding the check value in X_op_symbol. */
+ while (view_assert_failed)
+ {
+ expressionS *exp;
+ symbolS *sym;
+ offsetT failed;
+
+ gas_assert (!symbol_resolved_p (view_assert_failed));
+
+ exp = symbol_get_value_expression (view_assert_failed);
+ sym = view_assert_failed;
+
+ /* If view_assert_failed looks like a compound check in the
+ chain, break it up. */
+ if (exp->X_op == O_add && exp->X_add_number == 0 && exp->X_unsigned)
+ {
+ view_assert_failed = exp->X_add_symbol;
+ sym = exp->X_op_symbol;
+ }
+ else
+ view_assert_failed = NULL;
+
+ failed = resolve_symbol_value (sym);
+ if (!symbol_resolved_p (sym) || failed)
+ {
+ as_bad (_("view number mismatch"));
+ break;
+ }
}
}