\input texinfo @c -*-Texinfo-*-
-@c Copyright (c) 1991 1992 1993 1994 Free Software Foundation, Inc.
+@c Copyright (c) 1991, 92, 93, 94, 95, 96, 97, 98, 2000, 2001
+@c Free Software Foundation, Inc.
@c UPDATE!! On future updates--
@c (1) check for new machine-dep cmdline options in
@c md_parse_option definitions in config/tc-*.c
@set have-stabs
@c ---
@include asconfig.texi
+@include gasver.texi
@c ---
@c common OR combinations of conditions
@ifset AOUT
@set aout-bout
@end ifset
+@ifset ARM/Thumb
+@set ARM
+@end ifset
@ifset BOUT
@set aout-bout
@end ifset
@ifinfo
This file documents the GNU Assembler "@value{AS}".
-Copyright (C) 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001 Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+ Permission is granted to copy, distribute and/or modify this document
+ under the terms of the GNU Free Documentation License, Version 1.1
+ or any later version published by the Free Software Foundation;
+ with no Invariant Sections, with no Front-Cover Texts, and with no
+ Back-Cover Texts. A copy of the license is included in the
+ section entitled "GNU Free Documentation License".
@ignore
Permission is granted to process this file through Tex and print the
(this paragraph not being relevant to the printed manual).
@end ignore
-Permission is granted to copy and distribute modified versions of this manual
-under the conditions for verbatim copying, provided that the entire resulting
-derived work is distributed under the terms of a permission notice identical to
-this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
@end ifinfo
@titlepage
@title Using @value{AS}
-@subtitle The GNU Assembler
+@subtitle The @sc{gnu} Assembler
@ifclear GENERIC
@subtitle for the @value{TARGET} family
@end ifclear
@sp 1
-@subtitle January 1994
+@subtitle Version @value{VERSION}
@sp 1
@sp 13
The Free Software Foundation Inc. thanks The Nice Computer
Company of Australia for loaning Dean Elsner to write the
-first (Vax) version of @code{as} for Project GNU.
+first (Vax) version of @code{as} for Project @sc{gnu}.
The proprietors, management and staff of TNCCA thank FSF for
distracting the boss while they got some work
done.
@tex
{\parskip=0pt
\hfill {\it Using {\tt @value{AS}}}\par
-\hfill Edited by Roland Pesch for Cygnus Support\par
+\hfill Edited by Cygnus Support\par
}
%"boxit" macro for figures:
%Modified from Knuth's ``boxit'' macro from TeXbook (answer to exercise 21.3)
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001 Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+ Permission is granted to copy, distribute and/or modify this document
+ under the terms of the GNU Free Documentation License, Version 1.1
+ or any later version published by the Free Software Foundation;
+ with no Invariant Sections, with no Front-Cover Texts, and with no
+ Back-Cover Texts. A copy of the license is included in the
+ section entitled "GNU Free Documentation License".
-Permission is granted to copy and distribute modified versions of this manual
-under the conditions for verbatim copying, provided that the entire resulting
-derived work is distributed under the terms of a permission notice identical to
-this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
@end titlepage
@ifinfo
@node Top
@top Using @value{AS}
-This file is a user guide to the @sc{gnu} assembler @code{@value{AS}}.
+This file is a user guide to the @sc{gnu} assembler @code{@value{AS}} version
+@value{VERSION}.
@ifclear GENERIC
This version of the file describes @code{@value{AS}} configured to generate
code for @value{TARGET} architectures.
@end ifclear
+
+This document is distributed under the terms of the GNU Free
+Documentation License. A copy of the license is included in the
+section entitled "GNU Free Documentation License".
+
@menu
* Overview:: Overview
* Invoking:: Command-Line Options
* Expressions:: Expressions
* Pseudo Ops:: Assembler Directives
* Machine Dependencies:: Machine Dependent Features
+* Reporting Bugs:: Reporting Bugs
* Acknowledgements:: Who Did What
+* GNU Free Documentation License:: GNU Free Documentation License
* Index:: Index
@end menu
@end ifinfo
@c We don't use deffn and friends for the following because they seem
@c to be limited to one line for the header.
@smallexample
-@value{AS} [ -a[dhlns][=file] ] [ -D ] [ -f ] [ --help ]
- [ -I @var{dir} ] [ -J ] [ -K ] [ -L ] [ -o @var{objfile} ]
- [ -R ] [ --statistics ] [ -v ] [ -version ] [ --version ]
- [ -W ] [ -w ] [ -x ] [ -Z ]
+@value{AS} [ -a[cdhlns][=file] ] [ -D ] [ --defsym @var{sym}=@var{val} ]
+ [ -f ] [ --gstabs ] [ --gdwarf2 ] [ --help ] [ -I @var{dir} ] [ -J ] [ -K ] [ -L ]
+ [ --keep-locals ] [ -o @var{objfile} ] [ -R ] [ --statistics ] [ -v ]
+ [ -version ] [ --version ] [ -W ] [ --warn ] [ --fatal-warnings ]
+ [ -w ] [ -x ] [ -Z ] [ --target-help ]
@ifset A29K
@c am29k has no machine-dependent assembler options
@end ifset
-@c start-sanitize-arc
@ifset ARC
- [ -mbig-endian | -mlittle-endian ]
+ [ -marc[5|6|7|8] ]
+ [ -EB | -EL ]
+@end ifset
+@ifset ARM
+ [ -m[arm]1 | -m[arm]2 | -m[arm]250 | -m[arm]3 | -m[arm]6 | -m[arm]60 |
+ -m[arm]600 | -m[arm]610 | -m[arm]620 | -m[arm]7[t][[d]m[i]][fe] | -m[arm]70 |
+ -m[arm]700 | -m[arm]710[c] | -m[arm]7100 | -m[arm]7500 | -m[arm]8 |
+ -m[arm]810 | -m[arm]9 | -m[arm]920 | -m[arm]920t | -m[arm]9tdmi |
+ -mstrongarm | -mstrongarm110 | -mstrongarm1100 ]
+ [ -m[arm]v2 | -m[arm]v2a | -m[arm]v3 | -m[arm]v3m | -m[arm]v4 | -m[arm]v4t |
+ -m[arm]v5 | -[arm]v5t | -[arm]v5te ]
+ [ -mthumb | -mall ]
+ [ -mfpa10 | -mfpa11 | -mfpe-old | -mno-fpu ]
+ [ -EB | -EL ]
+ [ -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant ]
+ [ -mthumb-interwork ]
+ [ -moabi ]
+ [ -k ]
+@end ifset
+@ifset D10V
+ [ -O ]
+@end ifset
+@ifset D30V
+ [ -O | -n | -N ]
@end ifset
-@c end-sanitize-arc
@ifset H8
@c Hitachi family chips have no machine-dependent assembler options
@end ifset
@ifset HPPA
@c HPPA has no machine-dependent assembler options (yet).
@end ifset
+@ifset PJ
+ [ -mb | -me ]
+@end ifset
@ifset SPARC
- [ -Av6 | -Av7 | -Av8 | -Av9 | -Asparclite | -bump ]
+@c The order here is important. See c-sparc.texi.
+ [ -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite
+ -Av8plus | -Av8plusa | -Av9 | -Av9a ]
+ [ -xarch=v8plus | -xarch=v8plusa ] [ -bump ] [ -32 | -64 ]
+@end ifset
+@ifset TIC54X
+ [ -mcpu=54[123589] | -mcpu=54[56]lp ] [ -mfar-mode | -mf ]
+ [ -merrors-to-file <filename> | -me <filename> ]
@end ifset
@ifset Z8000
@c Z8000 has no machine-dependent assembler options
[ -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC ]
[ -b ] [ -no-relax ]
@end ifset
+@ifset M32R
+ [ --m32rx | --[no-]warn-explicit-parallel-conflicts | --W[n]p ]
+@end ifset
@ifset M680X0
[ -l ] [ -m68000 | -m68010 | -m68020 | ... ]
@end ifset
+@ifset MCORE
+ [ -jsri2bsr ] [ -sifilter ] [ -relax ]
+ [ -mcpu=[210|340] ]
+@end ifset
+@ifset M68HC11
+ [ -m68hc11 | -m68hc12 ]
+ [ --force-long-branchs ] [ --short-branchs ] [ --strict-direct-mode ]
+ [ --print-insn-syntax ] [ --print-opcodes ] [ --generate-example ]
+@end ifset
@ifset MIPS
[ -nocpp ] [ -EL ] [ -EB ] [ -G @var{num} ] [ -mcpu=@var{CPU} ]
- [ -mips1 ] [ -mips2 ] [ -mips3 ] [ -m4650 ] [ -no-m4650 ]
+ [ -mips1 ] [ -mips2 ] [ -mips3 ] [ -mips4 ] [ -mips5 ]
+ [ -mips32 ] [ -mips64 ]
+ [ -m4650 ] [ -no-m4650 ]
[ --trap ] [ --break ]
[ --emulation=@var{name} ]
@end ifset
@end smallexample
@table @code
-@item -a[dhlns]
+@item -a[cdhlmns]
Turn on listings, in any of a variety of ways:
@table @code
+@item -ac
+omit false conditionals
+
@item -ad
omit debugging directives
@item -al
include assembly
+@item -am
+include macro expansions
+
@item -an
omit forms processing
You may combine these options; for example, use @samp{-aln} for assembly
listing without forms processing. The @samp{=file} option, if used, must be
-the last one. By itself, @samp{-a} defaults to @samp{-ahls}---that is, all
-listings turned on.
+the last one. By itself, @samp{-a} defaults to @samp{-ahls}.
@item -D
Ignored. This option is accepted for script compatibility with calls to
other assemblers.
+@item --defsym @var{sym}=@var{value}
+Define the symbol @var{sym} to be @var{value} before assembling the input file.
+@var{value} must be an integer constant. As in C, a leading @samp{0x}
+indicates a hexadecimal value, and a leading @samp{0} indicates an octal value.
+
@item -f
``fast''---skip whitespace and comment preprocessing (assume source is
compiler output).
+@item --gstabs
+Generate stabs debugging information for each assembler line. This
+may help debugging assembler code, if the debugger can handle it.
+
+@item --gdwarf2
+Generate DWARF2 debugging information for each assembler line. This
+may help debugging assembler code, if the debugger can handle it. Note - this
+option is only supported by some targets, not all of them.
+
@item --help
Print a summary of the command line options and exit.
+@item --target-help
+Print a summary of all target specific options and exit.
+
@item -I @var{dir}
Add directory @var{dir} to the search list for @code{.include} directives.
@end ifset
@item -L
-Keep (in the symbol table) local symbols, starting with @samp{L}.
+@itemx --keep-locals
+Keep (in the symbol table) local symbols. On traditional a.out systems
+these start with @samp{L}, but different systems have different local
+label prefixes.
@item -o @var{objfile}
Name the object-file output from @code{@value{AS}} @var{objfile}.
Print the maximum space (in bytes) and total time (in seconds) used by
assembly.
+@item --strip-local-absolute
+Remove local absolute symbols from the outgoing symbol table.
+
@item -v
@itemx -version
Print the @code{as} version.
Print the @code{as} version and exit.
@item -W
+@itemx --no-warn
Suppress warning messages.
+@item --fatal-warnings
+Treat warnings as errors.
+
+@item --warn
+Don't suppress warning messages or treat them as errors.
+
@item -w
Ignored.
an ARC processor.
@table @code
+@item -marc[5|6|7|8]
+This option selects the core processor variant.
+@item -EB | -EL
+Select either big-endian (-EB) or little-endian (-EL) output.
+@end table
+@end ifset
-@cindex ARC endianness
-@cindex endianness, ARC
-@cindex big endian output, ARC
-@item -mbig-endian
-Generate ``big endian'' format output.
+@ifset ARM
+The following options are available when @value{AS} is configured for the ARM
+processor family.
-@cindex little endian output, ARC
-@item -mlittle-endian
-Generate ``little endian'' format output.
+@table @code
+@item -m[arm][1|2|3|6|7|8|9][...]
+Specify which ARM processor variant is the target.
+@item -m[arm]v[2|2a|3|3m|4|4t|5|5t]
+Specify which ARM architecture variant is used by the target.
+@item -mthumb | -mall
+Enable or disable Thumb only instruction decoding.
+@item -mfpa10 | -mfpa11 | -mfpe-old | -mno-fpu
+Select which Floating Point architecture is the target.
+@item -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant | -moabi
+Select which procedure calling convention is in use.
+@item -EB | -EL
+Select either big-endian (-EB) or little-endian (-EL) output.
+@item -mthumb-interwork
+Specify that the code has been generated with interworking between Thumb and
+ARM code in mind.
+@item -k
+Specify that PIC code has been generated.
+@end table
+@end ifset
+
+@ifset D10V
+The following options are available when @value{AS} is configured for
+a D10V processor.
+@table @code
+@cindex D10V optimization
+@cindex optimization, D10V
+@item -O
+Optimize output by parallelizing instructions.
+@end table
+@end ifset
+@ifset D30V
+The following options are available when @value{AS} is configured for a D30V
+processor.
+@table @code
+@cindex D30V optimization
+@cindex optimization, D30V
+@item -O
+Optimize output by parallelizing instructions.
+
+@cindex D30V nops
+@item -n
+Warn when nops are generated.
+
+@cindex D30V nops after 32-bit multiply
+@item -N
+Warn when a nop after a 32-bit multiply instruction is generated.
@end table
@end ifset
@end table
@end ifset
+@ifset M32R
+The following options are available when @value{AS} is configured for the
+Mitsubishi M32R series.
+
+@table @code
+
+@item --m32rx
+Specify which processor in the M32R family is the target. The default
+is normally the M32R, but this option changes it to the M32RX.
+
+@item --warn-explicit-parallel-conflicts or --Wp
+Produce warning messages when questionable parallel constructs are
+encountered.
+
+@item --no-warn-explicit-parallel-conflicts or --Wnp
+Do not produce warning messages when questionable parallel constructs are
+encountered.
+
+@end table
+@end ifset
+
@ifset M680X0
The following options are available when @value{AS} is configured for the
Motorola 68000 series.
@item -l
Shorten references to undefined symbols, to one word instead of two.
-@item -m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040
-@itemx | -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -mcpu32
+@item -m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060
+@itemx | -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -mcpu32 | -m5200
Specify what processor in the 68000 family is the target. The default
is normally the 68020, but this can be changed at configuration time.
@end table
@end ifset
+@ifset PJ
+The following options are available when @value{AS} is configured for
+a picoJava processor.
+
+@table @code
+
+@cindex PJ endianness
+@cindex endianness, PJ
+@cindex big endian output, PJ
+@item -mb
+Generate ``big endian'' format output.
+
+@cindex little endian output, PJ
+@item -ml
+Generate ``little endian'' format output.
+
+@end table
+@end ifset
+
+@ifset M68HC11
+The following options are available when @value{AS} is configured for the
+Motorola 68HC11 or 68HC12 series.
+
+@table @code
+
+@item -m68hc11 | -m68hc12
+Specify what processor is the target. The default is
+defined by the configuration option when building the assembler.
+
+@item --force-long-branchs
+Relative branches are turned into absolute ones. This concerns
+conditional branches, unconditional branches and branches to a
+sub routine.
+
+@item -S | --short-branchs
+Do not turn relative branchs into absolute ones
+when the offset is out of range.
+
+@item --strict-direct-mode
+Do not turn the direct addressing mode into extended addressing mode
+when the instruction does not support direct addressing mode.
+
+@item --print-insn-syntax
+Print the syntax of instruction in case of error.
+
+@item --print-opcodes
+print the list of instructions with syntax and then exit.
+
+@item --generate-example
+print an example of instruction for each possible instruction and then exit.
+This option is only useful for testing @code{@value{AS}}.
+
+@end table
+@end ifset
+
@ifset SPARC
The following options are available when @code{@value{AS}} is configured
for the SPARC architecture:
@table @code
-@item -Av6 | -Av7 | -Av8 | -Av9 | -Asparclite
+@item -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite
+@itemx -Av8plus | -Av8plusa | -Av9 | -Av9a
Explicitly select a variant of the SPARC architecture.
+@samp{-Av8plus} and @samp{-Av8plusa} select a 32 bit environment.
+@samp{-Av9} and @samp{-Av9a} select a 64 bit environment.
+
+@samp{-Av8plusa} and @samp{-Av9a} enable the SPARC V9 instruction set with
+UltraSPARC extensions.
+
+@item -xarch=v8plus | -xarch=v8plusa
+For compatibility with the Solaris v9 assembler. These options are
+equivalent to -Av8plus and -Av8plusa, respectively.
+
@item -bump
Warn when the assembler switches to another architecture.
@end table
@end ifset
+@ifset TIC54X
+The following options are available when @value{AS} is configured for the 'c54x
+architecture.
+
+@table @code
+@item -mfar-mode
+Enable extended addressing mode. All addresses and relocations will assume
+extended addressing (usually 23 bits).
+@item -mcpu=@var{CPU_VERSION}
+Sets the CPU version being compiled for.
+@item -merrors-to-file @var{FILENAME}
+Redirect error output to a file, for broken systems which don't support such
+behaviour in the shell.
+@end table
+@end ifset
+
@ifset MIPS
The following options are available when @value{AS} is configured for
a MIPS processor.
@item -mips1
@itemx -mips2
@itemx -mips3
+@itemx -mips4
+@itemx -mips32
Generate code for a particular MIPS Instruction Set Architecture level.
@samp{-mips1} corresponds to the @sc{r2000} and @sc{r3000} processors,
@samp{-mips2} to the @sc{r6000} processor, and @samp{-mips3} to the @sc{r4000}
processor.
+@samp{-mips5}, @samp{-mips32}, and @samp{-mips64} correspond
+to generic @sc{MIPS V}, @sc{MIPS32}, and @sc{MIPS64} ISA
+processors, respectively.
@item -m4650
-@item -no-m4650
+@itemx -no-m4650
Generate code for the MIPS @sc{r4650} chip. This tells the assembler to accept
the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
instructions around accesses to the @samp{HI} and @samp{LO} registers.
@samp{-no-m4650} turns off this option.
@item -mcpu=@var{CPU}
-Generate code for a particular MIPS cpu. This has little effect on the
-assembler, but it is passed by @code{@value{GCC}}.
+Generate code for a particular MIPS cpu. It is exactly equivalent to
+@samp{-m@var{cpu}}, except that there are more value of @var{cpu}
+understood.
@cindex emulation
@item --emulation=@var{name}
-This option causes @code{@value{AS}} to emulated @code{@value{AS}} configured
+This option causes @code{@value{AS}} to emulate @code{@value{AS}} configured
for some other target, in all respects, including output format (choosing
between ELF and ECOFF only), handling of pseudo-opcodes which may generate
debugging information or store symbol table information, and default
@code{@value{AS}} ignores this option. It is accepted for compatibility with
the native tools.
+@need 900
@item --trap
@itemx --no-trap
@itemx --break
@end table
@end ifset
+@ifset MCORE
+The following options are available when @value{AS} is configured for
+an MCore processor.
+
+@table @code
+@item -jsri2bsr
+@itemx -nojsri2bsr
+Enable or disable the JSRI to BSR transformation. By default this is enabled.
+The command line option @samp{-nojsri2bsr} can be used to disable it.
+
+@item -sifilter
+@itemx -nosifilter
+Enable or disable the silicon filter behaviour. By default this is disabled.
+The default can be overridden by the @samp{-sifilter} command line option.
+
+@item -relax
+Alter jump instructions for long displacements.
+
+@item -mcpu=[210|340]
+Select the cpu type on the target hardware. This controls which instructions
+can be assembled.
+
+@item -EB
+Assemble for a big endian target.
+
+@item -EL
+Assemble for a little endian target.
+
+@end table
+@end ifset
+
@menu
* Manual:: Structure of this Manual
-* GNU Assembler:: @value{AS}, the GNU Assembler
+* GNU Assembler:: The GNU Assembler
* Object Formats:: Object File Formats
* Command Line:: Command Line
* Input Files:: Input Files
@end ifset
@end ifclear
-@c I think this is premature---pesch@cygnus.com, 17jan1991
+@c I think this is premature---doc@cygnus.com, 17jan1991
@ignore
Throughout this manual, we assume that you are running @dfn{GNU},
the portable operating system from the @dfn{Free Software
@c directives).
@node GNU Assembler
-@section @value{AS}, the GNU Assembler
+@section The GNU Assembler
@sc{gnu} @code{as} is really a family of assemblers.
@ifclear GENERIC
including object file formats, most assembler directives (often called
@dfn{pseudo-ops}) and assembler syntax.@refill
-@cindex purpose of @sc{gnu} @code{@value{AS}}
+@cindex purpose of @sc{gnu} assembler
@code{@value{AS}} is primarily intended to assemble the output of the
@sc{gnu} C compiler @code{@value{GCC}} for use by the linker
@code{@value{LD}}. Nevertheless, we've tried to make @code{@value{AS}}
doesn't change the meaning of the source.
@c I added "con" prefix to "catenation" just to prove I can overcome my
-@c APL training... pesch@cygnus.com
+@c APL training... doc@cygnus.com
The source program is a concatenation of the text in all the files, in the
order specified.
to @code{@value{AS}}.
@dfn{Logical files} are simply names declared explicitly by assembler
-directives; they bear no relation to physical files. Logical file names
-help error messages reflect the original source file, when @code{@value{AS}}
-source is itself synthesized from other files.
-@xref{App-File,,@code{.app-file}}.
+directives; they bear no relation to physical files. Logical file names help
+error messages reflect the original source file, when @code{@value{AS}} source
+is itself synthesized from other files. @code{@value{AS}} understands the
+@samp{#} directives emitted by the @code{@value{GCC}} preprocessor. See also
+@ref{File,,@code{.file}}.
@node Object
@section Output (Object) File
information for the debugger.
@c link above to some info file(s) like the description of a.out.
-@c don't forget to describe GNU info as well as Unix lossage.
+@c don't forget to describe @sc{gnu} info as well as Unix lossage.
@node Errors
@section Error and Warning Messages
-@cindex error messsages
+@cindex error messages
@cindex warning messages
-@cindex messages from @code{@value{AS}}
+@cindex messages from assembler
@code{@value{AS}} may write warnings and error messages to the standard error
file (usually your terminal). This should not happen when a compiler
runs @code{@value{AS}} automatically. Warnings report an assumption made so
@noindent
@cindex line numbers, in warnings/errors
(where @b{NNN} is a line number). If a logical file name has been given
-(@pxref{App-File,,@code{.app-file}}) it is used for the filename,
-otherwise the name of the current input file is used. If a logical line
-number was given
+(@pxref{File,,@code{.file}}) it is used for the filename, otherwise the name of
+the current input file is used. If a logical line number was given
@ifset GENERIC
(@pxref{Line,,@code{.line}})
@end ifset
@node Invoking
@chapter Command-Line Options
-@cindex options, all versions of @code{@value{AS}}
+@cindex options, all versions of assembler
This chapter describes command-line options available in @emph{all}
versions of the @sc{gnu} assembler; @pxref{Machine Dependencies}, for options specific
@ifclear GENERIC
to particular machine architectures.
@end ifset
-If you are invoking @code{@value{AS}} via the @sc{gnu} C compiler (version 2), you
-can use the @samp{-Wa} option to pass arguments through to the
-assembler. The assembler arguments must be separated from each other
-(and the @samp{-Wa}) by commas. For example:
+If you are invoking @code{@value{AS}} via the @sc{gnu} C compiler (version 2),
+you can use the @samp{-Wa} option to pass arguments through to the assembler.
+The assembler arguments must be separated from each other (and the @samp{-Wa})
+by commas. For example:
@smallexample
gcc -c -g -O -Wa,-alh,-L file.c
@end smallexample
@noindent
-emits a listing to standard output with high-level
-and assembly source.
+This passes two options to the assembler: @samp{-alh} (emit a listing to
+standard output with with high-level and assembly source) and @samp{-L} (retain
+local symbols in the symbol table).
Usually you do not need to use this @samp{-Wa} mechanism, since many compiler
command-line options are automatically passed to the assembler by the compiler.
assembler.)
@menu
-* a:: -a[dhlns] enable listings
+* a:: -a[cdhlns] enable listings
* D:: -D for compatibility
* f:: -f to work faster
* I:: -I for .include search path
@end ifset
* L:: -L to retain local labels
+* M:: -M or --mri to assemble in MRI compatibility mode
+* MD:: --MD for dependency tracking
* o:: -o to name the object file
* R:: -R to join data and text sections
* statistics:: --statistics to see statistics about assembly
+* traditional-format:: --traditional-format for compatible output
* v:: -v to announce version
-* W:: -W to suppress warnings
+* W:: -W, --no-warn, --warn, --fatal-warnings to control warnings
* Z:: -Z to make object file even after errors
@end menu
@node a
-@section Enable Listings: @code{-a[dhlns]}
+@section Enable Listings: @code{-a[cdhlns]}
@kindex -a
+@kindex -ac
@kindex -ad
@kindex -ah
@kindex -al
@samp{-g} be used, and that assembly listings (@samp{-al}) be requested
also.
+Use the @samp{-ac} option to omit false conditionals from a listing. Any lines
+which are not assembled because of a false @code{.if} (or @code{.ifdef}, or any
+other conditional), or a true @code{.if} followed by an @code{.else}, will be
+omitted from the listing.
+
Use the @samp{-ad} option to omit debugging directives from the
listing.
@ifset HPPA
On the HPPA local labels begin with @samp{L$}.
@end ifset
-@c start-sanitize-arc
-@ifset ARC
-On the ARC local labels begin with @samp{.L}.
-@end ifset
-@c end-sanitize-arc
+
+@node M
+@section Assemble in MRI Compatibility Mode: @code{-M}
+
+@kindex -M
+@cindex MRI compatibility mode
+The @code{-M} or @code{--mri} option selects MRI compatibility mode. This
+changes the syntax and pseudo-op handling of @code{@value{AS}} to make it
+compatible with the @code{ASM68K} or the @code{ASM960} (depending upon the
+configured target) assembler from Microtec Research. The exact nature of the
+MRI syntax will not be documented here; see the MRI manuals for more
+information. Note in particular that the handling of macros and macro
+arguments is somewhat different. The purpose of this option is to permit
+assembling existing MRI assembler code using @code{@value{AS}}.
+
+The MRI compatibility is not complete. Certain operations of the MRI assembler
+depend upon its object file format, and can not be supported using other object
+file formats. Supporting these would require enhancing each object file format
+individually. These are:
+
+@itemize @bullet
+@item global symbols in common section
+
+The m68k MRI assembler supports common sections which are merged by the linker.
+Other object file formats do not support this. @code{@value{AS}} handles
+common sections by treating them as a single common symbol. It permits local
+symbols to be defined within a common section, but it can not support global
+symbols, since it has no way to describe them.
+
+@item complex relocations
+
+The MRI assemblers support relocations against a negated section address, and
+relocations which combine the start addresses of two or more sections. These
+are not support by other object file formats.
+
+@item @code{END} pseudo-op specifying start address
+
+The MRI @code{END} pseudo-op permits the specification of a start address.
+This is not supported by other object file formats. The start address may
+instead be specified using the @code{-e} option to the linker, or in a linker
+script.
+
+@item @code{IDNT}, @code{.ident} and @code{NAME} pseudo-ops
+
+The MRI @code{IDNT}, @code{.ident} and @code{NAME} pseudo-ops assign a module
+name to the output file. This is not supported by other object file formats.
+
+@item @code{ORG} pseudo-op
+
+The m68k MRI @code{ORG} pseudo-op begins an absolute section at a given
+address. This differs from the usual @code{@value{AS}} @code{.org} pseudo-op,
+which changes the location within the current section. Absolute sections are
+not supported by other object file formats. The address of a section may be
+assigned within a linker script.
+@end itemize
+
+There are some other features of the MRI assembler which are not supported by
+@code{@value{AS}}, typically either because they are difficult or because they
+seem of little consequence. Some of these may be supported in future releases.
+
+@itemize @bullet
+
+@item EBCDIC strings
+
+EBCDIC strings are not supported.
+
+@item packed binary coded decimal
+
+Packed binary coded decimal is not supported. This means that the @code{DC.P}
+and @code{DCB.P} pseudo-ops are not supported.
+
+@item @code{FEQU} pseudo-op
+
+The m68k @code{FEQU} pseudo-op is not supported.
+
+@item @code{NOOBJ} pseudo-op
+
+The m68k @code{NOOBJ} pseudo-op is not supported.
+
+@item @code{OPT} branch control options
+
+The m68k @code{OPT} branch control options---@code{B}, @code{BRS}, @code{BRB},
+@code{BRL}, and @code{BRW}---are ignored. @code{@value{AS}} automatically
+relaxes all branches, whether forward or backward, to an appropriate size, so
+these options serve no purpose.
+
+@item @code{OPT} list control options
+
+The following m68k @code{OPT} list control options are ignored: @code{C},
+@code{CEX}, @code{CL}, @code{CRE}, @code{E}, @code{G}, @code{I}, @code{M},
+@code{MEX}, @code{MC}, @code{MD}, @code{X}.
+
+@item other @code{OPT} options
+
+The following m68k @code{OPT} options are ignored: @code{NEST}, @code{O},
+@code{OLD}, @code{OP}, @code{P}, @code{PCO}, @code{PCR}, @code{PCS}, @code{R}.
+
+@item @code{OPT} @code{D} option is default
+
+The m68k @code{OPT} @code{D} option is the default, unlike the MRI assembler.
+@code{OPT NOD} may be used to turn it off.
+
+@item @code{XREF} pseudo-op.
+
+The m68k @code{XREF} pseudo-op is ignored.
+
+@item @code{.debug} pseudo-op
+
+The i960 @code{.debug} pseudo-op is not supported.
+
+@item @code{.extended} pseudo-op
+
+The i960 @code{.extended} pseudo-op is not supported.
+
+@item @code{.list} pseudo-op.
+
+The various options of the i960 @code{.list} pseudo-op are not supported.
+
+@item @code{.optimize} pseudo-op
+
+The i960 @code{.optimize} pseudo-op is not supported.
+
+@item @code{.output} pseudo-op
+
+The i960 @code{.output} pseudo-op is not supported.
+
+@item @code{.setreal} pseudo-op
+
+The i960 @code{.setreal} pseudo-op is not supported.
+
+@end itemize
+
+@node MD
+@section Dependency tracking: @code{--MD}
+
+@kindex --MD
+@cindex dependency tracking
+@cindex make rules
+
+@code{@value{AS}} can generate a dependency file for the file it creates. This
+file consists of a single rule suitable for @code{make} describing the
+dependencies of the main source file.
+
+The rule is written to the file named in its argument.
+
+This feature is used in the automatic updating of makefiles.
@node o
@section Name the Object File: @code{-o}
(in bytes), and the total execution time taken for the assembly (in @sc{cpu}
seconds).
+@node traditional-format
+@section Compatible output: @code{--traditional-format}
+
+@kindex --traditional-format
+For some targets, the output of @code{@value{AS}} is different in some ways
+from the output of some existing assembler. This switch requests
+@code{@value{AS}} to use the traditional format instead.
+
+For example, it disables the exception frame optimizations which
+@code{@value{AS}} normally does by default on @code{@value{GCC}} output.
+
@node v
@section Announce Version: @code{-v}
@kindex -v
@kindex -version
-@cindex @code{@value{AS}} version
-@cindex version of @code{@value{AS}}
+@cindex assembler version
+@cindex version of assembler
You can find out what version of as is running by including the
option @samp{-v} (which you can also spell as @samp{-version}) on the
command line.
@node W
-@section Suppress Warnings: @code{-W}
+@section Control Warnings: @code{-W}, @code{--warn}, @code{--no-warn}, @code{--fatal-warnings}
-@kindex -W
-@cindex suppressing warnings
-@cindex warnings, suppressing
@code{@value{AS}} should never give a warning or error message when
assembling compiler output. But programs written by people often
cause @code{@value{AS}} to give a warning that a particular assumption was
made. All such warnings are directed to the standard error file.
-If you use this option, no warnings are issued. This option only
-affects the warning messages: it does not change any particular of how
-@code{@value{AS}} assembles your file. Errors, which stop the assembly, are
-still reported.
+
+@kindex @samp{-W}
+@kindex @samp{--no-warn}
+@cindex suppressing warnings
+@cindex warnings, suppressing
+If you use the @code{-W} and @code{--no-warn} options, no warnings are issued.
+This only affects the warning messages: it does not change any particular of
+how @code{@value{AS}} assembles your file. Errors, which stop the assembly,
+are still reported.
+
+@kindex @samp{--fatal-warnings}
+@cindex errors, caused by warnings
+@cindex warnings, causing error
+If you use the @code{--fatal-warnings} option, @code{@value{AS}} considers
+files that generate warnings to be in error.
+
+@kindex @samp{--warn}
+@cindex warnings, switching on
+You can switch these options off again by specifying @code{--warn}, which
+causes warnings to be output as usual.
@node Z
@section Generate Object File in Spite of Errors: @code{-Z}
@cindex line comment character
Anything from the @dfn{line comment} character to the next newline
is considered a comment and is ignored. The line comment character is
-@c start-sanitize-arc
+@ifset A29K
+@samp{;} for the AMD 29K family;
+@end ifset
@ifset ARC
@samp{;} on the ARC;
@end ifset
-@c end-sanitize-arc
-@ifset VAX
-@samp{#} on the Vax;
-@end ifset
-@ifset I960
-@samp{#} on the i960;
-@end ifset
-@ifset SPARC
-@samp{!} on the SPARC;
-@end ifset
-@ifset M680X0
-@samp{|} on the 680x0;
-@end ifset
-@ifset A29K
-@samp{;} for the AMD 29K family;
+@ifset ARM
+@samp{@@} on the ARM;
@end ifset
@ifset H8/300
@samp{;} for the H8/300 family;
@ifset HPPA
@samp{;} for the HPPA;
@end ifset
+@ifset I80386
+@samp{#} on the i386 and x86-64;
+@end ifset
+@ifset I960
+@samp{#} on the i960;
+@end ifset
+@ifset PJ
+@samp{;} for picoJava;
+@end ifset
@ifset SH
@samp{!} for the Hitachi SH;
@end ifset
+@ifset SPARC
+@samp{!} on the SPARC;
+@end ifset
+@ifset M32R
+@samp{#} on the m32r;
+@end ifset
+@ifset M680X0
+@samp{|} on the 680x0;
+@end ifset
+@ifset M68HC11
+@samp{#} on the 68HC11 and 68HC12;
+@end ifset
+@ifset VAX
+@samp{#} on the Vax;
+@end ifset
@ifset Z8000
@samp{!} for the Z8000;
@end ifset
+@ifset V850
+@samp{#} on the V850;
+@end ifset
see @ref{Machine Dependencies}. @refill
-@c FIXME What about i386, m88k, i860?
+@c FIXME What about m88k, i860?
@ifset GENERIC
On some machines there are two different line comment characters. One
a line, while the other always begins a comment.
@end ifset
+@ifset V850
+The V850 assembler also supports a double dash as starting a comment that
+extends to the end of the line.
+
+@samp{--};
+@end ifset
+
@kindex #
@cindex lines starting with @code{#}
@cindex logical line numbers
It is an error to end any statement with end-of-file: the last
character of any input file should be a newline.@refill
-@cindex continuing statements
-@cindex multi-line statements
-@cindex statement on multiple lines
-You may write a statement on more than one line if you put a
-backslash (@kbd{\}) immediately in front of any newlines within the
-statement. When @code{@value{AS}} reads a backslashed newline both
-characters are ignored. You can even put backslashed newlines in
-the middle of symbol names without changing the meaning of your
-source program.
-
An empty statement is allowed, and may include whitespace. It is ignored.
@cindex instructions and directives
@cindex directives and instructions
@c "key symbol" is not used elsewhere in the document; seems pedantic to
-@c @defn{} it in that case, as was done previously... pesch@cygnus.com,
+@c @defn{} it in that case, as was done previously... doc@cygnus.com,
@c 13feb91.
A statement begins with zero or more labels, optionally followed by a
key symbol which determines what kind of statement it is. The key
@c @item \a
@c Mnemonic for ACKnowledge; for ASCII this is octal code 007.
@c
-@item \b
@cindex @code{\b} (backspace character)
@cindex backspace (@code{\b})
+@item \b
Mnemonic for backspace; for ASCII this is octal code 010.
@c @item \e
@c Mnemonic for EOText; for ASCII this is octal code 004.
@c
-@item \f
@cindex @code{\f} (formfeed character)
@cindex formfeed (@code{\f})
+@item \f
Mnemonic for FormFeed; for ASCII this is octal code 014.
-@item \n
@cindex @code{\n} (newline character)
@cindex newline (@code{\n})
+@item \n
Mnemonic for newline; for ASCII this is octal code 012.
@c @item \p
@c Mnemonic for prefix; for ASCII this is octal code 033, usually known as @code{escape}.
@c
-@item \r
@cindex @code{\r} (carriage return character)
@cindex carriage return (@code{\r})
+@item \r
Mnemonic for carriage-Return; for ASCII this is octal code 015.
@c @item \s
@c Mnemonic for space; for ASCII this is octal code 040. Included for compliance with
@c other assemblers.
@c
-@item \t
@cindex @code{\t} (tab)
@cindex tab (@code{\t})
+@item \t
Mnemonic for horizontal Tab; for ASCII this is octal code 011.
@c @item \v
@c @item \x @var{digit} @var{digit} @var{digit}
@c A hexadecimal character code. The numeric code is 3 hexadecimal digits.
@c
-@item \ @var{digit} @var{digit} @var{digit}
@cindex @code{\@var{ddd}} (octal character code)
@cindex octal character code (@code{\@var{ddd}})
+@item \ @var{digit} @var{digit} @var{digit}
An octal character code. The numeric code is 3 octal digits.
For compatibility with other Unix systems, 8 and 9 are accepted as digits:
for example, @code{\008} has the value 010, and @code{\009} the value 011.
-@ifset HPPA
-@item \@code{x} @var{hex-digit} @var{hex-digit}
-@cindex @code{\@var{xdd}} (hex character code)
-@cindex hex character code (@code{\@var{xdd}})
-A hex character code. The numeric code is 2 hexadecimal digits. Either
-upper or lower case @code{x} works.
-@end ifset
+@cindex @code{\@var{xd...}} (hex character code)
+@cindex hex character code (@code{\@var{xd...}})
+@item \@code{x} @var{hex-digits...}
+A hex character code. All trailing hex digits are combined. Either upper or
+lower case @code{x} works.
-@item \\
@cindex @code{\\} (@samp{\} character)
@cindex backslash (@code{\\})
+@item \\
Represents one @samp{\} character.
@c @item \'
@c (@xref{Characters,,Character Constants}.) to represent
@c a @samp{'}.
@c
-@item \"
@cindex @code{\"} (doublequote character)
@cindex doublequote (@code{\"})
+@item \"
Represents one @samp{"} character. Needed in strings to represent
this character, because an unescaped @samp{"} would end the string.
and AMD 29K architectures, the letter must be
one of the letters @samp{DFPRSX} (in upper or lower case).
-@c start-sanitize-arc
-On the ARC, the letter one of the letters @samp{DFRS}
+On the ARC, the letter must be one of the letters @samp{DFRS}
(in upper or lower case).
-@c end-sanitize-arc
On the Intel 960 architecture, the letter must be
one of the letters @samp{DFT} (in upper or lower case).
@ifset A29K
One of the letters @samp{DFPRSX} (in upper or lower case).
@end ifset
-@c start-sanitize-arc
@ifset ARC
One of the letters @samp{DFRS} (in upper or lower case).
@end ifset
-@c end-sanitize-arc
@ifset H8
One of the letters @samp{DFPRSX} (in upper or lower case).
@end ifset
-@ifset I960
-One of the letters @samp{DFT} (in upper or lower case).
-@end ifset
@ifset HPPA
The letter @samp{E} (upper case only).
@end ifset
+@ifset I960
+One of the letters @samp{DFT} (in upper or lower case).
+@end ifset
@end ifclear
@item
@menu
* Secs Background:: Background
-* Ld Sections:: @value{LD} Sections
-* As Sections:: @value{AS} Internal Sections
+* Ld Sections:: Linker Sections
+* As Sections:: Assembler Internal Sections
* Sub-Sections:: Sub-Sections
* bss:: bss Section
@end menu
ensure they end on a word (sixteen bit) boundary.
@end ifset
-@cindex standard @code{@value{AS}} sections
+@cindex standard assembler sections
An object file written by @code{@value{AS}} has at least three sections, any
of which may be empty. These are named @dfn{text}, @dfn{data} and
@dfn{bss} sections.
use of @code{@value{AS}} and have no meaning except during assembly.
@node Ld Sections
-@section @value{LD} Sections
+@section Linker Sections
@code{@value{LD}} deals with just four kinds of sections, summarized below.
@table @strong
@cindex bss section
@item bss section
This section contains zeroed bytes when your program begins running. It
-is used to hold unitialized variables or common storage. The length of
+is used to hold uninitialized variables or common storage. The length of
each partial program's bss section is important, but because it starts
out containing zeroed bytes there is no need to store explicit zero
bytes in the object file. The bss section was invented to eliminate
@c END TEXI2ROFF-KILL
@node As Sections
-@section @value{AS} Internal Sections
+@section Assembler Internal Sections
-@cindex internal @code{@value{AS}} sections
+@cindex internal assembler sections
@cindex sections in messages, internal
These sections are meant only for the internal use of @code{@value{AS}}. They
have no meaning at run-time. You do not really need to know about these
section-relative address.
@table @b
-@item ASSEMBLER-INTERNAL-LOGIC-ERROR!
@cindex assembler internal logic error
+@item ASSEMBLER-INTERNAL-LOGIC-ERROR!
An internal assembler logic error has been found. This means there is a
bug in the assembler.
-@item expr section
@cindex expr (internal section)
+@item expr section
The assembler stores complex expression internally as combinations of
symbols. When it needs to represent an expression as a symbol, it puts
it in the expr section.
your program starts running, all the contents of the bss
section are zeroed bytes.
-Addresses in the bss section are allocated with special directives; you
-may not assemble anything directly into the bss section. Hence there
-are no bss subsections. @xref{Comm,,@code{.comm}},
-@pxref{Lcomm,,@code{.lcomm}}.
+The @code{.lcomm} pseudo-op defines a symbol in the bss section; see
+@ref{Lcomm,,@code{.lcomm}}.
+
+The @code{.comm} pseudo-op may be used to declare a common symbol, which is
+another form of uninitialized symbol; see @xref{Comm,,@code{.comm}}.
+
+@ifset GENERIC
+When assembling for a target which supports multiple sections, such as ELF or
+COFF, you may switch into the @code{.bss} section and define symbols as usual;
+see @ref{Section,,@code{.section}}. You may only assemble zero values into the
+section. Typically the section will only contain symbol definitions and
+@code{.skip} directives (@pxref{Skip,,@code{.skip}}).
+@end ifset
@node Symbols
@chapter Symbols
If the label is written @samp{1:} then the digit is @samp{1}.
And so on up through @samp{9:}.
-@item @ctrl{A}
+@item @kbd{C-A}
This unusual character is included so you do not accidentally invent
a symbol of the same name. The character has ASCII value
@samp{\001}.
through @samp{9:}.
@end table
-For instance, the first @code{1:} is named @code{L1@ctrl{A}1}, the 44th
-@code{3:} is named @code{L3@ctrl{A}44}.
+For instance, the first @code{1:} is named @code{L1@kbd{C-A}1}, the 44th
+@code{3:} is named @code{L3@kbd{C-A}44}.
@node Dot
@section The Special Dot Symbol
Lowest Precedence
@table @code
-@item +
@cindex addition, permitted arguments
@cindex plus, permitted arguments
@cindex arguments for addition
+@item +
@dfn{Addition}. If either argument is absolute, the result has the section of
the other argument. You may not add together arguments from different
sections.
-@item -
@cindex subtraction, permitted arguments
@cindex minus, permitted arguments
@cindex arguments for subtraction
+@item -
@dfn{Subtraction}. If the right argument is absolute, the
result has the section of the left argument.
If both arguments are in the same section, the result is absolute.
@end ifset
* Align:: @code{.align @var{abs-expr} , @var{abs-expr}}
-* App-File:: @code{.app-file @var{string}}
* Ascii:: @code{.ascii "@var{string}"}@dots{}
* Asciz:: @code{.asciz "@var{string}"}@dots{}
* Balign:: @code{.balign @var{abs-expr} , @var{abs-expr}}
* Double:: @code{.double @var{flonums}}
* Eject:: @code{.eject}
* Else:: @code{.else}
+* Elseif:: @code{.elseif}
+* End:: @code{.end}
@ifset COFF
* Endef:: @code{.endef}
@end ifset
+* Endfunc:: @code{.endfunc}
* Endif:: @code{.endif}
* Equ:: @code{.equ @var{symbol}, @var{expression}}
+* Equiv:: @code{.equiv @var{symbol}, @var{expression}}
+* Err:: @code{.err}
+* Exitm:: @code{.exitm}
* Extern:: @code{.extern}
+* Fail:: @code{.fail}
@ifclear no-file-dir
* File:: @code{.file @var{string}}
@end ifclear
* Fill:: @code{.fill @var{repeat} , @var{size} , @var{value}}
* Float:: @code{.float @var{flonums}}
+* Func:: @code{.func}
* Global:: @code{.global @var{symbol}}, @code{.globl @var{symbol}}
+@ifset ELF
+* Hidden:: @code{.hidden @var{names}}
+@end ifset
+
* hword:: @code{.hword @var{expressions}}
* Ident:: @code{.ident}
* If:: @code{.if @var{absolute expression}}
* Include:: @code{.include "@var{file}"}
* Int:: @code{.int @var{expressions}}
+@ifset ELF
+* Internal:: @code{.internal @var{names}}
+@end ifset
+
+* Irp:: @code{.irp @var{symbol},@var{values}}@dots{}
+* Irpc:: @code{.irpc @var{symbol},@var{values}}@dots{}
* Lcomm:: @code{.lcomm @var{symbol} , @var{length}}
* Lflags:: @code{.lflags}
@ifclear no-line-dir
@end ifclear
* Ln:: @code{.ln @var{line-number}}
+* Linkonce:: @code{.linkonce [@var{type}]}
* List:: @code{.list}
* Long:: @code{.long @var{expressions}}
@ignore
* Lsym:: @code{.lsym @var{symbol}, @var{expression}}
@end ignore
+* Macro:: @code{.macro @var{name} @var{args}}@dots{}
+* MRI:: @code{.mri @var{val}}
* Nolist:: @code{.nolist}
* Octa:: @code{.octa @var{bignums}}
* Org:: @code{.org @var{new-lc} , @var{fill}}
* P2align:: @code{.p2align @var{abs-expr} , @var{abs-expr}}
+@ifset ELF
+* PopSection:: @code{.popsection}
+* Previous:: @code{.previous}
+@end ifset
+
+* Print:: @code{.print @var{string}}
+@ifset ELF
+* Protected:: @code{.protected @var{names}}
+@end ifset
+
* Psize:: @code{.psize @var{lines}, @var{columns}}
+* Purgem:: @code{.purgem @var{name}}
+@ifset ELF
+* PushSection:: @code{.pushsection @var{name}}
+@end ifset
+
* Quad:: @code{.quad @var{bignums}}
+* Rept:: @code{.rept @var{count}}
* Sbttl:: @code{.sbttl "@var{subheading}"}
@ifset COFF
* Scl:: @code{.scl @var{class}}
-@end ifset
-@ifset COFF
* Section:: @code{.section @var{name}, @var{subsection}}
@end ifset
* Set:: @code{.set @var{symbol}, @var{expression}}
* Short:: @code{.short @var{expressions}}
* Single:: @code{.single @var{flonums}}
-@ifset COFF
-* Size:: @code{.size}
-@end ifset
-
+* Size:: @code{.size [@var{name} , @var{expression}]}
+* Skip:: @code{.skip @var{size} , @var{fill}}
+* Sleb128:: @code{.sleb128 @var{expressions}}
* Space:: @code{.space @var{size} , @var{fill}}
@ifset have-stabs
* Stab:: @code{.stabd, .stabn, .stabs}
@end ifset
* String:: @code{.string "@var{str}"}
+* Struct:: @code{.struct @var{expression}}
+@ifset ELF
+* SubSection:: @code{.subsection}
+* Symver:: @code{.symver @var{name},@var{name2@@nodename}}
+@end ifset
+
@ifset COFF
* Tag:: @code{.tag @var{structname}}
@end ifset
* Text:: @code{.text @var{subsection}}
* Title:: @code{.title "@var{heading}"}
+* Type:: @code{.type <@var{int} | @var{name} , @var{type description}>}
+* Uleb128:: @code{.uleb128 @var{expressions}}
@ifset COFF
-* Type:: @code{.type @var{int}}
* Val:: @code{.val @var{addr}}
@end ifset
-* Word:: @code{.word @var{expressions}}
-* Deprecated:: Deprecated Directives
+@ifset ELF
+* Version:: @code{.version "@var{string}"}
+* VTableEntry:: @code{.vtable_entry @var{table}, @var{offset}}
+* VTableInherit:: @code{.vtable_inherit @var{child}, @var{parent}}
+* Weak:: @code{.weak @var{names}}
+@end ifset
+
+* Word:: @code{.word @var{expressions}}
+* Deprecated:: Deprecated Directives
@end menu
@node Abort
@end ifset
@node Align
-@section @code{.align @var{abs-expr} , @var{abs-expr}}
+@section @code{.align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@cindex padding the location counter
@cindex @code{align} directive
-Pad the location counter (in the current subsection) to a particular
-storage boundary. The first expression (which must be absolute) is the
-alignment required, as described below.
-The second expression (also absolute) gives the value to be stored in
-the padding bytes. It (and the comma) may be omitted. If it is
-omitted, the padding bytes are zero.
+Pad the location counter (in the current subsection) to a particular storage
+boundary. The first expression (which must be absolute) is the alignment
+required, as described below.
+
+The second expression (also absolute) gives the fill value to be stored in the
+padding bytes. It (and the comma) may be omitted. If it is omitted, the
+padding bytes are normally zero. However, on some systems, if the section is
+marked as containing code and the fill value is omitted, the space is filled
+with no-op instructions.
+
+The third expression is also absolute, and is also optional. If it is present,
+it is the maximum number of bytes that should be skipped by this alignment
+directive. If doing the alignment would require skipping more bytes than the
+specified maximum, then the alignment is not done at all. You can omit the
+fill value (the second argument) entirely by simply using two commas after the
+required alignment; this can be useful if you want the alignment to be filled
+with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
-For the a29k, HPPA, m86k, m88k, w65, sparc, and i386 using ELF format,
+For the a29k, hppa, m68k, m88k, w65, sparc, and Hitachi SH, and i386 using ELF
+format,
the first expression is the
alignment request in bytes. For example @samp{.align 8} advances
the location counter until it is a multiple of 8. If the location counter
is already a multiple of 8, no change is needed.
-For other systems, including the i386 using a.out format, it is the
+For other systems, including the i386 using a.out format, and the arm and
+strongarm, it is the
number of low-order zero bits the location counter must have after
advancement. For example @samp{.align 3} advances the location
counter until it a multiple of 8. If the location counter is already a
described later, which have a consistent behavior across all
architectures (but are specific to GAS).
-@node App-File
-@section @code{.app-file @var{string}}
-
-@cindex logical file name
-@cindex file name, logical
-@cindex @code{app-file} directive
-@code{.app-file}
-@ifclear no-file-dir
-(which may also be spelled @samp{.file})
-@end ifclear
-tells @code{@value{AS}} that we are about to start a new
-logical file. @var{string} is the new file name. In general, the
-filename is recognized whether or not it is surrounded by quotes @samp{"};
-but if you wish to specify an empty file name is permitted,
-you must give the quotes--@code{""}. This statement may go away in
-future: it is only recognized to be compatible with old @code{@value{AS}}
-programs.@refill
-
@node Ascii
@section @code{.ascii "@var{string}"}@dots{}
a zero byte. The ``z'' in @samp{.asciz} stands for ``zero''.
@node Balign
-@section @code{.balign @var{abs-expr} , @var{abs-expr}}
+@section @code{.balign[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@cindex padding the location counter given number of bytes
@cindex @code{balign} directive
the location counter until it is a multiple of 8. If the location counter
is already a multiple of 8, no change is needed.
-The second expression (also absolute) gives the value to be stored in
-the padding bytes. It (and the comma) may be omitted. If it is
-omitted, the padding bytes are zero.
+The second expression (also absolute) gives the fill value to be stored in the
+padding bytes. It (and the comma) may be omitted. If it is omitted, the
+padding bytes are normally zero. However, on some systems, if the section is
+marked as containing code and the fill value is omitted, the space is filled
+with no-op instructions.
+
+The third expression is also absolute, and is also optional. If it is present,
+it is the maximum number of bytes that should be skipped by this alignment
+directive. If doing the alignment would require skipping more bytes than the
+specified maximum, then the alignment is not done at all. You can omit the
+fill value (the second argument) entirely by simply using two commas after the
+required alignment; this can be useful if you want the alignment to be filled
+with no-op instructions when appropriate.
+
+@cindex @code{balignw} directive
+@cindex @code{balignl} directive
+The @code{.balignw} and @code{.balignl} directives are variants of the
+@code{.balign} directive. The @code{.balignw} directive treats the fill
+pattern as a two byte word value. The @code{.balignl} directives treats the
+fill pattern as a four byte longword value. For example, @code{.balignw
+4,0x368d} will align to a multiple of 4. If it skips two bytes, they will be
+filled in with the value 0x368d (the exact placement of the bytes depends upon
+the endianness of the processor). If it skips 1 or 3 bytes, the fill value is
+undefined.
@node Byte
@section @code{.byte @var{expressions}}
@cindex @code{comm} directive
@cindex symbol, common
-@code{.comm} declares a named common area in the bss section. Normally
-@code{@value{LD}} reserves memory addresses for it during linking, so no partial
-program defines the location of the symbol. Use @code{.comm} to tell
-@code{@value{LD}} that it must be at least @var{length} bytes long. @code{@value{LD}}
-allocates space for each @code{.comm} symbol that is at least as
-long as the longest @code{.comm} request in any of the partial programs
-linked. @var{length} is an absolute expression.
+@code{.comm} declares a common symbol named @var{symbol}. When linking, a
+common symbol in one object file may be merged with a defined or common symbol
+of the same name in another object file. If @code{@value{LD}} does not see a
+definition for the symbol--just one or more common symbols--then it will
+allocate @var{length} bytes of uninitialized memory. @var{length} must be an
+absolute expression. If @code{@value{LD}} sees multiple common symbols with
+the same name, and they do not all have the same size, it will allocate space
+using the largest size.
+
+@ifset ELF
+When using ELF, the @code{.comm} directive takes an optional third argument.
+This is the desired alignment of the symbol, specified as a byte boundary (for
+example, an alignment of 16 means that the least significant 4 bits of the
+address should be zero). The alignment must be an absolute expression, and it
+must be a power of two. If @code{@value{LD}} allocates uninitialized memory
+for the common symbol, it will use the alignment when placing the symbol. If
+no alignment is specified, @code{@value{AS}} will set the alignment to the
+largest power of two less than or equal to the size of the symbol, up to a
+maximum of 16.
+@end ifset
@ifset HPPA
The syntax for @code{.comm} differs slightly on the HPPA. The syntax is
of code to be assembled if the condition for the preceding @code{.if}
was false.
-@ignore
-@node End, Endef, Else, Pseudo Ops
+@node Elseif
+@section @code{.elseif}
+
+@cindex @code{elseif} directive
+@code{.elseif} is part of the @code{@value{AS}} support for conditional
+assembly; @pxref{If,,@code{.if}}. It is shorthand for beginning a new
+@code{.if} block that would otherwise fill the entire @code{.else} section.
+
+@node End
@section @code{.end}
@cindex @code{end} directive
-This doesn't do anything---but isn't an s_ignore, so I suspect it's
-meant to do something eventually (which is why it isn't documented here
-as "for compatibility with blah").
-@end ignore
+@code{.end} marks the end of the assembly file. @code{@value{AS}} does not
+process anything in the file past the @code{.end} directive.
@ifset COFF
@node Endef
@end ifset
@end ifset
+@node Endfunc
+@section @code{.endfunc}
+@cindex @code{endfunc} directive
+@code{.endfunc} marks the end of a function specified with @code{.func}.
+
@node Endif
@section @code{.endif}
@samp{@var{symbol} .equ @var{expression}}.
@end ifset
+@node Equiv
+@section @code{.equiv @var{symbol}, @var{expression}}
+@cindex @code{equiv} directive
+The @code{.equiv} directive is like @code{.equ} and @code{.set}, except that
+the assembler will signal an error if @var{symbol} is already defined.
+
+Except for the contents of the error message, this is roughly equivalent to
+@smallexample
+.ifdef SYM
+.err
+.endif
+.equ SYM,VAL
+@end smallexample
+
+@node Err
+@section @code{.err}
+@cindex @code{err} directive
+If @code{@value{AS}} assembles a @code{.err} directive, it will print an error
+message and, unless the @code{-Z} option was used, it will not generate an
+object file. This can be used to signal error an conditionally compiled code.
+
+@node Exitm
+@section @code{.exitm}
+Exit early from the current macro definition. @xref{Macro}.
+
@node Extern
@section @code{.extern}
with other assemblers---but it is ignored. @code{@value{AS}} treats
all undefined symbols as external.
+@node Fail
+@section @code{.fail @var{expression}}
+
+@cindex @code{fail} directive
+Generates an error or a warning. If the value of the @var{expression} is 500
+or more, @code{@value{AS}} will print a warning message. If the value is less
+than 500, @code{@value{AS}} will print an error message. The message will
+include the value of @var{expression}. This can occasionally be useful inside
+complex nested macros or conditional assembly.
+
@ifclear no-file-dir
@node File
@section @code{.file @var{string}}
@cindex @code{file} directive
@cindex logical file name
@cindex file name, logical
-@code{.file} (which may also be spelled @samp{.app-file}) tells
-@code{@value{AS}} that we are about to start a new logical file.
-@var{string} is the new file name. In general, the filename is
-recognized whether or not it is surrounded by quotes @samp{"}; but if
-you wish to specify an empty file name, you must give the
-quotes--@code{""}. This statement may go away in future: it is only
-recognized to be compatible with old @code{@value{AS}} programs.
+@code{.file} tells @code{@value{AS}} that we are about to start a new logical
+file. @var{string} is the new file name. In general, the filename is
+recognized whether or not it is surrounded by quotes @samp{"}; but if you wish
+to specify an empty file name, you must give the quotes--@code{""}. This
+statement may go away in future: it is only recognized to be compatible with
+old @code{@value{AS}} programs.
@ifset A29K
In some configurations of @code{@value{AS}}, @code{.file} has already been
removed to avoid conflicts with other assemblers. @xref{Machine Dependencies}.
@end ifset
@end ifclear
+@node Func
+@section @code{.func @var{name}[,@var{label}]}
+@cindex @code{func} directive
+@code{.func} emits debugging information to denote function @var{name}, and
+is ignored unless the file is assembled with debugging enabled.
+Only @samp{--gstabs} is currently supported.
+@var{label} is the entry point of the function and if omitted @var{name}
+prepended with the @samp{leading char} is used.
+@samp{leading char} is usually @code{_} or nothing, depending on the target.
+All functions are currently defined to have @code{void} return type.
+The function must be terminated with @code{.endfunc}.
+
@node Global
@section @code{.global @var{symbol}}, @code{.globl @var{symbol}}
@xref{HPPA Directives,, HPPA Assembler Directives}.
@end ifset
+@ifset ELF
+@node Hidden
+@section @code{.hidden @var{names}}
+
+@cindex @code{.hidden} directive
+@cindex Visibility
+This one of the ELF visibility directives. The other two are
+@code{.internal} (@pxref{Internal,,@code{.internal}}) and
+@code{.protected} (@pxref{Protected,,@code{.protected}}).
+
+This directive overrides the named symbols default visibility (which is set by
+their binding: local, global or weak). The directive sets the visibility to
+@code{hidden} which means that the symbols are not visible to other components.
+Such symbols are always considered to be @code{protected} as well.
+@end ifset
+
@node hword
@section @code{.hword @var{expressions}}
(which must be an @var{absolute expression}) is non-zero. The end of
the conditional section of code must be marked by @code{.endif}
(@pxref{Endif,,@code{.endif}}); optionally, you may include code for the
-alternative condition, flagged by @code{.else} (@pxref{Else,,@code{.else}}.
+alternative condition, flagged by @code{.else} (@pxref{Else,,@code{.else}}).
+If you have several conditions to check, @code{.elseif} may be used to avoid
+nesting blocks if/else within each subsequent @code{.else} block.
The following variants of @code{.if} are also supported:
@table @code
-@item .ifdef @var{symbol}
@cindex @code{ifdef} directive
+@item .ifdef @var{symbol}
Assembles the following section of code if the specified @var{symbol}
has been defined.
-@ignore
-@item .ifeqs
+@cindex @code{ifc} directive
+@item .ifc @var{string1},@var{string2}
+Assembles the following section of code if the two strings are the same. The
+strings may be optionally quoted with single quotes. If they are not quoted,
+the first string stops at the first comma, and the second string stops at the
+end of the line. Strings which contain whitespace should be quoted. The
+string comparison is case sensitive.
+
+@cindex @code{ifeq} directive
+@item .ifeq @var{absolute expression}
+Assembles the following section of code if the argument is zero.
+
@cindex @code{ifeqs} directive
-Not yet implemented.
-@end ignore
+@item .ifeqs @var{string1},@var{string2}
+Another form of @code{.ifc}. The strings must be quoted using double quotes.
+
+@cindex @code{ifge} directive
+@item .ifge @var{absolute expression}
+Assembles the following section of code if the argument is greater than or
+equal to zero.
+
+@cindex @code{ifgt} directive
+@item .ifgt @var{absolute expression}
+Assembles the following section of code if the argument is greater than zero.
+
+@cindex @code{ifle} directive
+@item .ifle @var{absolute expression}
+Assembles the following section of code if the argument is less than or equal
+to zero.
+
+@cindex @code{iflt} directive
+@item .iflt @var{absolute expression}
+Assembles the following section of code if the argument is less than zero.
+
+@cindex @code{ifnc} directive
+@item .ifnc @var{string1},@var{string2}.
+Like @code{.ifc}, but the sense of the test is reversed: this assembles the
+following section of code if the two strings are not the same.
-@item .ifndef @var{symbol}
-@itemx ifnotdef @var{symbol}
@cindex @code{ifndef} directive
@cindex @code{ifnotdef} directive
+@item .ifndef @var{symbol}
+@itemx .ifnotdef @var{symbol}
Assembles the following section of code if the specified @var{symbol}
has not been defined. Both spelling variants are equivalent.
-@ignore
-@item ifnes
-Not yet implemented.
-@end ignore
+@cindex @code{ifne} directive
+@item .ifne @var{absolute expression}
+Assembles the following section of code if the argument is not equal to zero
+(in other words, this is equivalent to @code{.if}).
+
+@cindex @code{ifnes} directive
+@item .ifnes @var{string1},@var{string2}
+Like @code{.ifeqs}, but the sense of the test is reversed: this assembles the
+following section of code if the two strings are not the same.
@end table
@node Include
@end ifset
@end ifclear
+@ifset ELF
+@node Internal
+@section @code{.internal @var{names}}
+
+@cindex @code{.internal} directive
+@cindex Visibility
+This one of the ELF visibility directives. The other two are
+@code{.hidden} (@pxref{Hidden,,@code{.hidden}}) and
+@code{.protected} (@pxref{Protected,,@code{.protected}}).
+
+This directive overrides the named symbols default visibility (which is set by
+their binding: local, global or weak). The directive sets the visibility to
+@code{internal} which means that the symbols are considered to be @code{hidden}
+(ie not visible to other components), and that some extra, processor specific
+processing must also be performed upon the symbols as well.
+@end ifset
+
+@node Irp
+@section @code{.irp @var{symbol},@var{values}}@dots{}
+
+@cindex @code{irp} directive
+Evaluate a sequence of statements assigning different values to @var{symbol}.
+The sequence of statements starts at the @code{.irp} directive, and is
+terminated by an @code{.endr} directive. For each @var{value}, @var{symbol} is
+set to @var{value}, and the sequence of statements is assembled. If no
+@var{value} is listed, the sequence of statements is assembled once, with
+@var{symbol} set to the null string. To refer to @var{symbol} within the
+sequence of statements, use @var{\symbol}.
+
+For example, assembling
+
+@example
+ .irp param,1,2,3
+ move d\param,sp@@-
+ .endr
+@end example
+
+is equivalent to assembling
+
+@example
+ move d1,sp@@-
+ move d2,sp@@-
+ move d3,sp@@-
+@end example
+
+@node Irpc
+@section @code{.irpc @var{symbol},@var{values}}@dots{}
+
+@cindex @code{irpc} directive
+Evaluate a sequence of statements assigning different values to @var{symbol}.
+The sequence of statements starts at the @code{.irpc} directive, and is
+terminated by an @code{.endr} directive. For each character in @var{value},
+@var{symbol} is set to the character, and the sequence of statements is
+assembled. If no @var{value} is listed, the sequence of statements is
+assembled once, with @var{symbol} set to the null string. To refer to
+@var{symbol} within the sequence of statements, use @var{\symbol}.
+
+For example, assembling
+
+@example
+ .irpc param,123
+ move d\param,sp@@-
+ .endr
+@end example
+
+is equivalent to assembling
+
+@example
+ move d1,sp@@-
+ move d2,sp@@-
+ move d3,sp@@-
+@end example
+
@node Lcomm
@section @code{.lcomm @var{symbol} , @var{length}}
is not declared global (@pxref{Global,,@code{.global}}), so is normally
not visible to @code{@value{LD}}.
+@ifset GENERIC
+Some targets permit a third argument to be used with @code{.lcomm}. This
+argument specifies the desired alignment of the symbol in the bss section.
+@end ifset
+
@ifset HPPA
The syntax for @code{.lcomm} differs slightly on the HPPA. The syntax is
@samp{@var{symbol} .lcomm, @var{length}}; @var{symbol} is optional.
debugging.
@end ifclear
+@node Linkonce
+@section @code{.linkonce [@var{type}]}
+@cindex COMDAT
+@cindex @code{linkonce} directive
+@cindex common sections
+Mark the current section so that the linker only includes a single copy of it.
+This may be used to include the same section in several different object files,
+but ensure that the linker will only include it once in the final output file.
+The @code{.linkonce} pseudo-op must be used for each instance of the section.
+Duplicate sections are detected based on the section name, so it should be
+unique.
+
+This directive is only supported by a few object file formats; as of this
+writing, the only object file format which supports it is the Portable
+Executable format used on Windows NT.
+
+The @var{type} argument is optional. If specified, it must be one of the
+following strings. For example:
+@smallexample
+.linkonce same_size
+@end smallexample
+Not all types may be supported on all object file formats.
+
+@table @code
+@item discard
+Silently discard duplicate sections. This is the default.
+
+@item one_only
+Warn if there are duplicate sections, but still keep only one copy.
+
+@item same_size
+Warn if any of the duplicates have different sizes.
+
+@item same_contents
+Warn if any of the duplicates do not have exactly the same contents.
+@end table
+
@node Ln
@section @code{.ln @var{line-number}}
@end ifset
@end ifset
+@node MRI
+@section @code{.mri @var{val}}
+
+@cindex @code{mri} directive
+@cindex MRI mode, temporarily
+If @var{val} is non-zero, this tells @code{@value{AS}} to enter MRI mode. If
+@var{val} is zero, this tells @code{@value{AS}} to exit MRI mode. This change
+affects code assembled until the next @code{.mri} directive, or until the end
+of the file. @xref{M, MRI mode, MRI mode}.
+
@node List
@section @code{.list}
The new symbol is not flagged as external.
@end ignore
+@node Macro
+@section @code{.macro}
+
+@cindex macros
+The commands @code{.macro} and @code{.endm} allow you to define macros that
+generate assembly output. For example, this definition specifies a macro
+@code{sum} that puts a sequence of numbers into memory:
+
+@example
+ .macro sum from=0, to=5
+ .long \from
+ .if \to-\from
+ sum "(\from+1)",\to
+ .endif
+ .endm
+@end example
+
+@noindent
+With that definition, @samp{SUM 0,5} is equivalent to this assembly input:
+
+@example
+ .long 0
+ .long 1
+ .long 2
+ .long 3
+ .long 4
+ .long 5
+@end example
+
+@ftable @code
+@item .macro @var{macname}
+@itemx .macro @var{macname} @var{macargs} @dots{}
+@cindex @code{macro} directive
+Begin the definition of a macro called @var{macname}. If your macro
+definition requires arguments, specify their names after the macro name,
+separated by commas or spaces. You can supply a default value for any
+macro argument by following the name with @samp{=@var{deflt}}. For
+example, these are all valid @code{.macro} statements:
+
+@table @code
+@item .macro comm
+Begin the definition of a macro called @code{comm}, which takes no
+arguments.
+
+@item .macro plus1 p, p1
+@itemx .macro plus1 p p1
+Either statement begins the definition of a macro called @code{plus1},
+which takes two arguments; within the macro definition, write
+@samp{\p} or @samp{\p1} to evaluate the arguments.
+
+@item .macro reserve_str p1=0 p2
+Begin the definition of a macro called @code{reserve_str}, with two
+arguments. The first argument has a default value, but not the second.
+After the definition is complete, you can call the macro either as
+@samp{reserve_str @var{a},@var{b}} (with @samp{\p1} evaluating to
+@var{a} and @samp{\p2} evaluating to @var{b}), or as @samp{reserve_str
+,@var{b}} (with @samp{\p1} evaluating as the default, in this case
+@samp{0}, and @samp{\p2} evaluating to @var{b}).
+@end table
+
+When you call a macro, you can specify the argument values either by
+position, or by keyword. For example, @samp{sum 9,17} is equivalent to
+@samp{sum to=17, from=9}.
+
+@item .endm
+@cindex @code{endm} directive
+Mark the end of a macro definition.
+
+@item .exitm
+@cindex @code{exitm} directive
+Exit early from the current macro definition.
+
+@cindex number of macros executed
+@cindex macros, count executed
+@item \@@
+@code{@value{AS}} maintains a counter of how many macros it has
+executed in this pseudo-variable; you can copy that number to your
+output with @samp{\@@}, but @emph{only within a macro definition}.
+
+@ignore
+@item LOCAL @var{name} [ , @dots{} ]
+@emph{Warning: @code{LOCAL} is only available if you select ``alternate
+macro syntax'' with @samp{-a} or @samp{--alternate}.} @xref{Alternate,,
+Alternate macro syntax}.
+
+Generate a string replacement for each of the @var{name} arguments, and
+replace any instances of @var{name} in each macro expansion. The
+replacement string is unique in the assembly, and different for each
+separate macro expansion. @code{LOCAL} allows you to write macros that
+define symbols, without fear of conflict between separate macro expansions.
+@end ignore
+@end ftable
+
@node Nolist
@section @code{.nolist}
@c double negative used below "not undefined" because this is a specific
@c reference to "undefined" (as SEG_UNKNOWN is called in this manual)
-@c section. pesch@cygnus.com 18feb91
+@c section. doc@cygnus.com 18feb91
Because @code{@value{AS}} tries to assemble programs in one pass, @var{new-lc}
may not be undefined. If you really detest this restriction we eagerly await
a chance to share your improved assembler.
@var{fill} defaults to zero.
@node P2align
-@section @code{.p2align @var{abs-expr} , @var{abs-expr}}
+@section @code{.p2align[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@cindex padding the location counter given a power of two
@cindex @code{p2align} directive
counter until it a multiple of 8. If the location counter is already a
multiple of 8, no change is needed.
-The second expression (also absolute) gives the value to be stored in
-the padding bytes. It (and the comma) may be omitted. If it is
-omitted, the padding bytes are zero.
+The second expression (also absolute) gives the fill value to be stored in the
+padding bytes. It (and the comma) may be omitted. If it is omitted, the
+padding bytes are normally zero. However, on some systems, if the section is
+marked as containing code and the fill value is omitted, the space is filled
+with no-op instructions.
+
+The third expression is also absolute, and is also optional. If it is present,
+it is the maximum number of bytes that should be skipped by this alignment
+directive. If doing the alignment would require skipping more bytes than the
+specified maximum, then the alignment is not done at all. You can omit the
+fill value (the second argument) entirely by simply using two commas after the
+required alignment; this can be useful if you want the alignment to be filled
+with no-op instructions when appropriate.
+
+@cindex @code{p2alignw} directive
+@cindex @code{p2alignl} directive
+The @code{.p2alignw} and @code{.p2alignl} directives are variants of the
+@code{.p2align} directive. The @code{.p2alignw} directive treats the fill
+pattern as a two byte word value. The @code{.p2alignl} directives treats the
+fill pattern as a four byte longword value. For example, @code{.p2alignw
+2,0x368d} will align to a multiple of 4. If it skips two bytes, they will be
+filled in with the value 0x368d (the exact placement of the bytes depends upon
+the endianness of the processor). If it skips 1 or 3 bytes, the fill value is
+undefined.
+
+@ifset ELF
+@node Previous
+@section @code{.previous}
+
+@cindex @code{.previous} directive
+@cindex Section Stack
+This is one of the ELF section stack manipulation directives. The others are
+@code{.section} (@pxref{Section}), @code{.subsection} (@pxref{SubSection}),
+@code{.pushsection} (@pxref{PushSection}), and @code{.popsection}
+(@pxref{PopSection}).
+
+This directive swaps the current section (and subsection) with most recently
+referenced section (and subsection) prior to this one. Multiple
+@code{.previous} directives in a row will flip between two sections (and their
+subsections).
+
+In terms of the section stack, this directive swaps the current section with
+the top section on the section stack.
+@end ifset
+
+@ifset ELF
+@node PopSection
+@section @code{.popsection}
+
+@cindex @code{.popsection} directive
+@cindex Section Stack
+This is one of the ELF section stack manipulation directives. The others are
+@code{.section} (@pxref{Section}), @code{.subsection} (@pxref{SubSection}),
+@code{.pushsection} (@pxref{PushSection}), and @code{.previous}
+(@pxref{Previous}).
+
+This directive replaces the current section (and subsection) with the top
+section (and subsection) on the section stack. This section is popped off the
+stack.
+@end ifset
+
+@node Print
+@section @code{.print @var{string}}
+
+@cindex @code{print} directive
+@code{@value{AS}} will print @var{string} on the standard output during
+assembly. You must put @var{string} in double quotes.
+
+@ifset ELF
+@node Protected
+@section @code{.protected @var{names}}
+
+@cindex @code{.protected} directive
+@cindex Visibility
+This one of the ELF visibility directives. The other two are
+@code{.hidden} (@pxref{Hidden}) and @code{.internal} (@pxref{Internal}).
+
+This directive overrides the named symbols default visibility (which is set by
+their binding: local, global or weak). The directive sets the visibility to
+@code{protected} which means that any references to the symbols from within the
+components that defines them must be resolved to the definition in that
+component, even if a definition in another component would normally preempt
+this.
+@end ifset
@node Psize
@section @code{.psize @var{lines} , @var{columns}}
If you specify @var{lines} as @code{0}, no formfeeds are generated save
those explicitly specified with @code{.eject}.
+@node Purgem
+@section @code{.purgem @var{name}}
+
+@cindex @code{purgem} directive
+Undefine the macro @var{name}, so that later uses of the string will not be
+expanded. @xref{Macro}.
+
+@ifset ELF
+@node PushSection
+@section @code{.pushsection @var{name} , @var{subsection}}
+
+@cindex @code{.pushsection} directive
+@cindex Section Stack
+This is one of the ELF section stack manipulation directives. The others are
+@code{.section} (@pxref{Section}), @code{.subsection} (@pxref{SubSection}),
+@code{.popsection} (@pxref{PopSection}), and @code{.previous}
+(@pxref{Previous}).
+
+This directive is a synonym for @code{.section}. It pushes the current section
+(and subsection) onto the top of the section stack, and then replaces the
+current section and subsection with @code{name} and @code{subsection}.
+@end ifset
+
@node Quad
@section @code{.quad @var{bignums}}
@cindex integer, 16-byte
@end ifset
+@node Rept
+@section @code{.rept @var{count}}
+
+@cindex @code{rept} directive
+Repeat the sequence of lines between the @code{.rept} directive and the next
+@code{.endr} directive @var{count} times.
+
+For example, assembling
+
+@example
+ .rept 3
+ .long 0
+ .endr
+@end example
+
+is equivalent to assembling
+
+@example
+ .long 0
+ .long 0
+ .long 0
+@end example
+
@node Sbttl
@section @code{.sbttl "@var{subheading}"}
@end ifset
@end ifset
-@ifset COFF
@node Section
-@section @code{.section @var{name}, @var{subsection}}
+@section @code{.section @var{name}} (COFF version)
@cindex @code{section} directive
-@cindex named section (COFF)
-@cindex COFF named section
-Assemble the following code into end of subsection numbered
-@var{subsection} in the COFF named section @var{name}. If you omit
-@var{subsection}, @code{@value{AS}} uses subsection number zero.
-@samp{.section .text} is equivalent to the @code{.text} directive;
-@samp{.section .data} is equivalent to the @code{.data} directive.
-@ifset GENERIC
+@cindex named section
+Use the @code{.section} directive to assemble the following code into a section
+named @var{name}.
+
This directive is only supported for targets that actually support arbitrarily
named sections; on @code{a.out} targets, for example, it is not accepted, even
-with a standard @code{a.out} section name as its parameter.
-@end ifset
+with a standard @code{a.out} section name.
+
+For COFF targets, the @code{.section} directive is used in one of the following
+ways:
+
+@smallexample
+.section @var{name}[, "@var{flags}"]
+.section @var{name}[, @var{subsegment}]
+@end smallexample
+
+If the optional argument is quoted, it is taken as flags to use for the
+section. Each flag is a single character. The following flags are recognized:
+@table @code
+@item b
+bss section (uninitialized data)
+@item n
+section is not loaded
+@item w
+writable section
+@item d
+data section
+@item r
+read-only section
+@item x
+executable section
+@item s
+shared section (meaningful for PE targets)
+@end table
+
+If no flags are specified, the default flags depend upon the section name. If
+the section name is not recognized, the default will be for the section to be
+loaded and writable.
+
+If the optional argument to the @code{.section} directive is not quoted, it is
+taken as a subsegment number (@pxref{Sub-Sections}).
+
+
+@section @code{.section @var{name}} (ELF version)
+
+@cindex @code{section} directive
+@cindex named section
+@ifset ELF
+@cindex Section Stack
+This is one of the ELF section stack manipulation directives. The others are
+@code{.subsection} (@pxref{SubSection}), @code{.pushsection}
+(@pxref{PushSection}), @code{.popsection} (@pxref{PopSection}), and
+@code{.previous} (@pxref{Previous}).
@end ifset
+For ELF targets, the @code{.section} directive is used like this:
+
+@smallexample
+.section @var{name} [, "@var{flags}"[, @@@var{type}]]
+@end smallexample
+
+The optional @var{flags} argument is a quoted string which may contain any
+combination of the following characters:
+@table @code
+@item a
+section is allocatable
+@item w
+section is writable
+@item x
+section is executable
+@end table
+
+The optional @var{type} argument may contain one of the following constants:
+@table @code
+@item @@progbits
+section contains data
+@item @@nobits
+section does not contain data (i.e., section only occupies space)
+@end table
+
+If no flags are specified, the default flags depend upon the section name. If
+the section name is not recognized, the default will be for the section to have
+none of the above flags: it will not be allocated in memory, nor writable, nor
+executable. The section will contain data.
+
+For ELF targets, the assembler supports another type of @code{.section}
+directive for compatibility with the Solaris assembler:
+
+@smallexample
+.section "@var{name}"[, @var{flags}...]
+@end smallexample
+
+Note that the section name is quoted. There may be a sequence of comma
+separated flags:
+@table @code
+@item #alloc
+section is allocatable
+@item #write
+section is writable
+@item #execinstr
+section is executable
+@end table
+
+This directive replaces the current section and subsection. The replaced
+section and subsection are pushed onto the section stack. See the contents of
+the gas testsuite directory @code{gas/testsuite/gas/elf} for some examples of
+how this directive and the other section stack directives work.
+
@node Set
@section @code{.set @var{symbol}, @var{expression}}
Set the value of @var{symbol} to @var{expression}. This
changes @var{symbol}'s value and type to conform to
@var{expression}. If @var{symbol} was flagged as external, it remains
-flagged. (@xref{Symbol Attributes}.)
+flagged (@pxref{Symbol Attributes}).
You may @code{.set} a symbol many times in the same assembly.
@end ifset
@end ifclear
-@ifset COFF
@node Size
-@section @code{.size}
+@section @code{.size} (COFF version)
@cindex @code{size} directive
This directive is generated by compilers to include auxiliary debugging
information in the symbol table. It is only permitted inside
@code{.def}/@code{.endef} pairs.
-@ifset BOUT
+@ifset BOUT
@samp{.size} is only meaningful when generating COFF format output; when
@code{@value{AS}} is generating @code{b.out}, it accepts this directive but
ignores it.
@end ifset
-@end ifset
+
+@section @code{.size @var{name} , @var{expression}} (ELF version)
+@cindex @code{size} directive
+
+This directive is used to set the size associated with a symbol @var{name}.
+The size in bytes is computed from @var{expression} which can make use of label
+arithmetic. This directive is typically used to set the size of function
+symbols.
+
+@node Sleb128
+@section @code{.sleb128 @var{expressions}}
+
+@cindex @code{sleb128} directive
+@var{sleb128} stands for ``signed little endian base 128.'' This is a
+compact, variable length representation of numbers used by the DWARF
+symbolic debugging format. @xref{Uleb128,@code{.uleb128}}.
@ifclear no-space-dir
+@node Skip
+@section @code{.skip @var{size} , @var{fill}}
+
+@cindex @code{skip} directive
+@cindex filling memory
+This directive emits @var{size} bytes, each of value @var{fill}. Both
+@var{size} and @var{fill} are absolute expressions. If the comma and
+@var{fill} are omitted, @var{fill} is assumed to be zero. This is the same as
+@samp{.space}.
+
@node Space
@section @code{.space @var{size} , @var{fill}}
@cindex filling memory
This directive emits @var{size} bytes, each of value @var{fill}. Both
@var{size} and @var{fill} are absolute expressions. If the comma
-and @var{fill} are omitted, @var{fill} is assumed to be zero.
+and @var{fill} are omitted, @var{fill} is assumed to be zero. This is the same
+as @samp{.skip}.
@ifset HPPA
@quotation
is the address of the location counter when the @code{.stabd} was
assembled.
-@item .stabn @var{type} , @var{other} , @var{desc} , @var{value}
@cindex @code{stabn} directive
+@item .stabn @var{type} , @var{other} , @var{desc} , @var{value}
The name of the symbol is set to the empty string @code{""}.
-@item .stabs @var{string} , @var{type} , @var{other} , @var{desc} , @var{value}
@cindex @code{stabs} directive
+@item .stabs @var{string} , @var{type} , @var{other} , @var{desc} , @var{value}
All five fields are specified.
@end table
@end ifset
particular machine, the assembler marks the end of each string with a 0 byte.
You can use any of the escape sequences described in @ref{Strings,,Strings}.
+@node Struct
+@section @code{.struct @var{expression}}
+
+@cindex @code{struct} directive
+Switch to the absolute section, and set the section offset to @var{expression},
+which must be an absolute expression. You might use this as follows:
+@smallexample
+ .struct 0
+field1:
+ .struct field1 + 4
+field2:
+ .struct field2 + 4
+field3:
+@end smallexample
+This would define the symbol @code{field1} to have the value 0, the symbol
+@code{field2} to have the value 4, and the symbol @code{field3} to have the
+value 8. Assembly would be left in the absolute section, and you would need to
+use a @code{.section} directive of some sort to change to some other section
+before further assembly.
+
+@ifset ELF
+@node SubSection
+@section @code{.subsection @var{name}}
+
+@cindex @code{.subsection} directive
+@cindex Section Stack
+This is one of the ELF section stack manipulation directives. The others are
+@code{.section} (@pxref{Section}), @code{.pushsection} (@pxref{PushSection}),
+@code{.popsection} (@pxref{PopSection}), and @code{.previous}
+(@pxref{Previous}).
+
+This directive replaces the current subsection with @code{name}. The current
+section is not changed. The replaced subsection is put onto the section stack
+in place of the then current top of stack subsection.
+@end ifset
+
+@ifset ELF
+@node Symver
+@section @code{.symver}
+@cindex @code{symver} directive
+@cindex symbol versioning
+@cindex versions of symbols
+Use the @code{.symver} directive to bind symbols to specific version nodes
+within a source file. This is only supported on ELF platforms, and is
+typically used when assembling files to be linked into a shared library.
+There are cases where it may make sense to use this in objects to be bound
+into an application itself so as to override a versioned symbol from a
+shared library.
+
+For ELF targets, the @code{.symver} directive can be used like this:
+@smallexample
+.symver @var{name}, @var{name2@@nodename}
+@end smallexample
+If the symbol @var{name} is defined within the file
+being assembled, the @code{.symver} directive effectively creates a symbol
+alias with the name @var{name2@@nodename}, and in fact the main reason that we
+just don't try and create a regular alias is that the @var{@@} character isn't
+permitted in symbol names. The @var{name2} part of the name is the actual name
+of the symbol by which it will be externally referenced. The name @var{name}
+itself is merely a name of convenience that is used so that it is possible to
+have definitions for multiple versions of a function within a single source
+file, and so that the compiler can unambiguously know which version of a
+function is being mentioned. The @var{nodename} portion of the alias should be
+the name of a node specified in the version script supplied to the linker when
+building a shared library. If you are attempting to override a versioned
+symbol from a shared library, then @var{nodename} should correspond to the
+nodename of the symbol you are trying to override.
+
+If the symbol @var{name} is not defined within the file being assembled, all
+references to @var{name} will be changed to @var{name2@@nodename}. If no
+reference to @var{name} is made, @var{name2@@nodename} will be removed from the
+symbol table.
+
+Another usage of the @code{.symver} directive is:
+@smallexample
+.symver @var{name}, @var{name2@@@@nodename}
+@end smallexample
+In this case, the symbol @var{name} must exist and be defined within
+the file being assembled. It is similar to @var{name2@@nodename}. The
+difference is @var{name2@@@@nodename} will also be used to resolve
+references to @var{name2} by the linker.
+
+The third usage of the @code{.symver} directive is:
+@smallexample
+.symver @var{name}, @var{name2@@@@@@nodename}
+@end smallexample
+When @var{name} is not defined within the
+file being assembled, it is treated as @var{name2@@nodename}. When
+@var{name} is defined within the file being assembled, the symbol
+name, @var{name}, will be changed to @var{name2@@@@nodename}.
+@end ifset
+
@ifset COFF
@node Tag
@section @code{.tag @var{structname}}
This directive affects subsequent pages, as well as the current page if
it appears within ten lines of the top of a page.
-@ifset COFF
@node Type
-@section @code{.type @var{int}}
+@section @code{.type @var{int}} (COFF version)
@cindex COFF symbol type
@cindex symbol type, COFF
@cindex @code{type} directive
This directive, permitted only within @code{.def}/@code{.endef} pairs,
records the integer @var{int} as the type attribute of a symbol table entry.
-@ifset BOUT
+@ifset BOUT
@samp{.type} is associated only with COFF format output; when
@code{@value{AS}} is configured for @code{b.out} output, it accepts this
directive but ignores it.
@end ifset
-@end ifset
+
+@section @code{.type @var{name} , @var{type description}} (ELF version)
+
+@cindex ELF symbol type
+@cindex symbol type, ELF
+@cindex @code{type} directive
+This directive is used to set the type of symbol @var{name} to be either a
+function symbol or an object symbol. There are five different syntaxes
+supported for the @var{type description} field, in order to provide
+compatibility with various other assemblers. The syntaxes supported are:
+
+@smallexample
+ .type <name>,#function
+ .type <name>,#object
+
+ .type <name>,@@function
+ .type <name>,@@object
+
+ .type <name>,%function
+ .type <name>,%object
+
+ .type <name>,"function"
+ .type <name>,"object"
+
+ .type <name> STT_FUNCTION
+ .type <name> STT_OBJECT
+@end smallexample
+
+@node Uleb128
+@section @code{.uleb128 @var{expressions}}
+
+@cindex @code{uleb128} directive
+@var{uleb128} stands for ``unsigned little endian base 128.'' This is a
+compact, variable length representation of numbers used by the DWARF
+symbolic debugging format. @xref{Sleb128,@code{.sleb128}}.
@ifset COFF
@node Val
@end ifset
@end ifset
+@ifset ELF
+@node Version
+@section @code{.version "@var{string}"}
+
+@cindex @code{.version}
+This directive creates a @code{.note} section and places into it an ELF
+formatted note of type NT_VERSION. The note's name is set to @code{string}.
+@end ifset
+
+@ifset ELF
+@node VTableEntry
+@section @code{.vtable_entry @var{table}, @var{offset}}
+
+@cindex @code{.vtable_entry}
+This directive finds or creates a symbol @code{table} and creates a
+@code{VTABLE_ENTRY} relocation for it with an addend of @code{offset}.
+
+@node VTableInherit
+@section @code{.vtable_inherit @var{child}, @var{parent}}
+
+@cindex @code{.vtable_inherit}
+This directive finds the symbol @code{child} and finds or creates the symbol
+@code{parent} and then creates a @code{VTABLE_INHERIT} relocation for the
+parent whose addend is the value of the child symbol. As a special case the
+parent name of @code{0} is treated as refering the @code{*ABS*} section.
+@end ifset
+
+@ifset ELF
+@node Weak
+@section @code{.weak @var{names}}
+
+@cindex @code{.weak}
+This directive sets the weak attribute on the comma separated list of symbol
+@code{names}. If the symbols do not already exist, they will be created.
+@end ifset
+
@node Word
@section @code{.word @var{expressions}}
@end ifset
In order to assemble compiler output into something that works,
-@code{@value{AS}} occasionlly does strange things to @samp{.word} directives.
+@code{@value{AS}} occasionally does strange things to @samp{.word} directives.
Directives of the form @samp{.word sym1-sym2} are often emitted by
compilers as part of jump tables. Therefore, when @code{@value{AS}} assembles a
directive of the form @samp{.word sym1-sym2}, and the difference between
They are included for compatibility with older assemblers.
@table @t
@item .abort
-@item .app-file
@item .line
@end table
subject, see the hardware manufacturer's manual.
@menu
-@c start-sanitize-arc
+@ifset A29K
+* AMD29K-Dependent:: AMD 29K Dependent Features
+@end ifset
@ifset ARC
* ARC-Dependent:: ARC Dependent Features
@end ifset
-@c end-sanitize-arc
-@ifset VAX
-* Vax-Dependent:: VAX Dependent Features
+@ifset ARM
+* ARM-Dependent:: ARM Dependent Features
@end ifset
-@ifset A29K
-* AMD29K-Dependent:: AMD 29K Dependent Features
+@ifset D10V
+* D10V-Dependent:: D10V Dependent Features
+@end ifset
+@ifset D30V
+* D30V-Dependent:: D30V Dependent Features
@end ifset
@ifset H8/300
* H8/300-Dependent:: Hitachi H8/300 Dependent Features
@ifset HPPA
* HPPA-Dependent:: HPPA Dependent Features
@end ifset
-@ifset SH
-* SH-Dependent:: Hitachi SH Dependent Features
+@ifset I370
+* ESA/390-Dependent:: IBM ESA/390 Dependent Features
+@end ifset
+@ifset I80386
+* i386-Dependent:: Intel 80386 and AMD x86-64 Dependent Features
+@end ifset
+@ifset I860
+* i860-Dependent:: Intel 80860 Dependent Features
@end ifset
@ifset I960
* i960-Dependent:: Intel 80960 Dependent Features
@end ifset
+@ifset M32R
+* M32R-Dependent:: M32R Dependent Features
+@end ifset
@ifset M680X0
* M68K-Dependent:: M680x0 Dependent Features
@end ifset
+@ifset M68HC11
+* M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features
+@end ifset
+@ifset MIPS
+* MIPS-Dependent:: MIPS Dependent Features
+@end ifset
+@ifset SH
+* SH-Dependent:: Hitachi SH Dependent Features
+@end ifset
+@ifset PJ
+* PJ-Dependent:: picoJava Dependent Features
+@end ifset
@ifset SPARC
* Sparc-Dependent:: SPARC Dependent Features
@end ifset
+@ifset TIC54X
+* TIC54X-Dependent:: TI TMS320C54x Dependent Features
+@end ifset
+@ifset V850
+* V850-Dependent:: V850 Dependent Features
+@end ifset
@ifset Z8000
* Z8000-Dependent:: Z8000 Dependent Features
@end ifset
-@ifset MIPS
-* MIPS-Dependent:: MIPS Dependent Features
-@end ifset
-@ifset I80386
-* i386-Dependent:: 80386 Dependent Features
+@ifset VAX
+* Vax-Dependent:: VAX Dependent Features
@end ifset
@end menu
@c node and sectioning commands; hence the repetition of @chapter BLAH
@c in both conditional blocks.
-@c start-sanitize-arc
@ifset ARC
-@ifset GENERIC
-@page
-@node ARC-Dependent
-@chapter ARC Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter ARC Dependent Features
-@end ifclear
-
-@cindex ARC support
-@menu
-* ARC-Opts:: Options
-* ARC-Float:: Floating Point
-* ARC-Directives:: Sparc Machine Directives
-@end menu
-
-@node ARC-Opts
-@section Options
-
-@cindex options for ARC
-@cindex ARC options
-@cindex architectures, ARC
-@cindex ARC architectures
-The ARC chip family includes several successive levels (or other
-variants) of chip, using the same core instruction set, but including
-a few additional instructions at each level.
-
-By default, @code{@value{AS}} assumes the core instruction set (ARC
-base). The @code{.cpu} pseudo-op is used to select a different variant.
-
-@table @code
-@cindex @code{-mbig-endian} option (ARC)
-@cindex @code{-mlittle-endian} option (ARC)
-@cindex ARC big-endian output
-@cindex ARC little-endian output
-@cindex big-endian output, ARC
-@cindex little-endian output, ARC
-@item -mbig-endian
-@itemx -mlittle-endian
-Any @sc{arc} configuration of @code{@value{AS}} can select big-endian or
-little-endian output at run time (unlike most other @sc{gnu} development
-tools, which must be configured for one or the other). Use
-@samp{-mbig-endian} to select big-endian output, and @samp{-mlittle-endian}
-for little-endian.
-@end table
-
-@node ARC-Float
-@section Floating Point
-
-@cindex floating point, ARC (@sc{ieee})
-@cindex ARC floating point (@sc{ieee})
-The ARC cpu family currently does not have hardware floating point
-support. Software floating point support is provided by @code{GCC}
-and uses @sc{ieee} floating-point numbers.
-
-@node ARC-Directives
-@section ARC Machine Directives
-
-@cindex ARC machine directives
-@cindex machine directives, ARC
-The ARC version of @code{@value{AS}} supports the following additional
-machine directives:
-
-@table @code
-@item .cpu
-@cindex @code{cpu} directive, SPARC
-This must be followed by the desired cpu. It must be one of
-@code{base}, @code{host}, @code{graphics}, or @code{audio}.
-
-@end table
-
-@end ifset
-@c end-sanitize-arc
-
-@ifset VAX
-@ifset GENERIC
-@node Vax-Dependent
-@chapter VAX Dependent Features
-@cindex VAX support
-
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter VAX Dependent Features
-@cindex VAX support
-
-@end ifclear
-
-@menu
-* Vax-Opts:: VAX Command-Line Options
-* VAX-float:: VAX Floating Point
-* VAX-directives:: Vax Machine Directives
-* VAX-opcodes:: VAX Opcodes
-* VAX-branch:: VAX Branch Improvement
-* VAX-operands:: VAX Operands
-* VAX-no:: Not Supported on VAX
-@end menu
-
-
-@node Vax-Opts
-@section VAX Command-Line Options
-
-@cindex command-line options ignored, VAX
-@cindex VAX command-line options ignored
-The Vax version of @code{@value{AS}} accepts any of the following options,
-gives a warning message that the option was ignored and proceeds.
-These options are for compatibility with scripts designed for other
-people's assemblers.
-
-@table @code
-@item @code{-D} (Debug)
-@itemx @code{-S} (Symbol Table)
-@itemx @code{-T} (Token Trace)
-@cindex @code{-D}, ignored on VAX
-@cindex @code{-S}, ignored on VAX
-@cindex @code{-T}, ignored on VAX
-These are obsolete options used to debug old assemblers.
-
-@item @code{-d} (Displacement size for JUMPs)
-@cindex @code{-d}, VAX option
-This option expects a number following the @samp{-d}. Like options
-that expect filenames, the number may immediately follow the
-@samp{-d} (old standard) or constitute the whole of the command line
-argument that follows @samp{-d} (@sc{gnu} standard).
-
-@item @code{-V} (Virtualize Interpass Temporary File)
-@cindex @code{-V}, redundant on VAX
-Some other assemblers use a temporary file. This option
-commanded them to keep the information in active memory rather
-than in a disk file. @code{@value{AS}} always does this, so this
-option is redundant.
-
-@item @code{-J} (JUMPify Longer Branches)
-@cindex @code{-J}, ignored on VAX
-Many 32-bit computers permit a variety of branch instructions
-to do the same job. Some of these instructions are short (and
-fast) but have a limited range; others are long (and slow) but
-can branch anywhere in virtual memory. Often there are 3
-flavors of branch: short, medium and long. Some other
-assemblers would emit short and medium branches, unless told by
-this option to emit short and long branches.
-
-@item @code{-t} (Temporary File Directory)
-@cindex @code{-t}, ignored on VAX
-Some other assemblers may use a temporary file, and this option
-takes a filename being the directory to site the temporary
-file. Since @code{@value{AS}} does not use a temporary disk file, this
-option makes no difference. @samp{-t} needs exactly one
-filename.
-@end table
-
-@cindex VMS (VAX) options
-@cindex options for VAX/VMS
-@cindex VAX/VMS options
-@cindex @code{-h} option, VAX/VMS
-@cindex @code{-+} option, VAX/VMS
-@cindex Vax-11 C compatibility
-@cindex symbols with lowercase, VAX/VMS
-@c FIXME! look into "I think" below, correct if needed, delete.
-The Vax version of the assembler accepts two options when
-compiled for VMS. They are @samp{-h}, and @samp{-+}. The
-@samp{-h} option prevents @code{@value{AS}} from modifying the
-symbol-table entries for symbols that contain lowercase
-characters (I think). The @samp{-+} option causes @code{@value{AS}} to
-print warning messages if the FILENAME part of the object file,
-or any symbol name is larger than 31 characters. The @samp{-+}
-option also inserts some code following the @samp{_main}
-symbol so that the object file is compatible with Vax-11
-"C".
-
-@node VAX-float
-@section VAX Floating Point
-
-@cindex VAX floating point
-@cindex floating point, VAX
-Conversion of flonums to floating point is correct, and
-compatible with previous assemblers. Rounding is
-towards zero if the remainder is exactly half the least significant bit.
-
-@code{D}, @code{F}, @code{G} and @code{H} floating point formats
-are understood.
-
-Immediate floating literals (@emph{e.g.} @samp{S`$6.9})
-are rendered correctly. Again, rounding is towards zero in the
-boundary case.
-
-@cindex @code{float} directive, VAX
-@cindex @code{double} directive, VAX
-The @code{.float} directive produces @code{f} format numbers.
-The @code{.double} directive produces @code{d} format numbers.
-
-@node VAX-directives
-@section Vax Machine Directives
-
-@cindex machine directives, VAX
-@cindex VAX machine directives
-The Vax version of the assembler supports four directives for
-generating Vax floating point constants. They are described in the
-table below.
-
-@cindex wide floating point directives, VAX
-@table @code
-@item .dfloat
-@cindex @code{dfloat} directive, VAX
-This expects zero or more flonums, separated by commas, and
-assembles Vax @code{d} format 64-bit floating point constants.
-
-@item .ffloat
-@cindex @code{ffloat} directive, VAX
-This expects zero or more flonums, separated by commas, and
-assembles Vax @code{f} format 32-bit floating point constants.
-
-@item .gfloat
-@cindex @code{gfloat} directive, VAX
-This expects zero or more flonums, separated by commas, and
-assembles Vax @code{g} format 64-bit floating point constants.
-
-@item .hfloat
-@cindex @code{hfloat} directive, VAX
-This expects zero or more flonums, separated by commas, and
-assembles Vax @code{h} format 128-bit floating point constants.
-
-@end table
-
-@node VAX-opcodes
-@section VAX Opcodes
-
-@cindex VAX opcode mnemonics
-@cindex opcode mnemonics, VAX
-@cindex mnemonics for opcodes, VAX
-All DEC mnemonics are supported. Beware that @code{case@dots{}}
-instructions have exactly 3 operands. The dispatch table that
-follows the @code{case@dots{}} instruction should be made with
-@code{.word} statements. This is compatible with all unix
-assemblers we know of.
-
-@node VAX-branch
-@section VAX Branch Improvement
-
-@cindex VAX branch improvement
-@cindex branch improvement, VAX
-@cindex pseudo-ops for branch, VAX
-Certain pseudo opcodes are permitted. They are for branch
-instructions. They expand to the shortest branch instruction that
-reaches the target. Generally these mnemonics are made by
-substituting @samp{j} for @samp{b} at the start of a DEC mnemonic.
-This feature is included both for compatibility and to help
-compilers. If you do not need this feature, avoid these
-opcodes. Here are the mnemonics, and the code they can expand into.
-
-@table @code
-@item jbsb
-@samp{Jsb} is already an instruction mnemonic, so we chose @samp{jbsb}.
-@table @asis
-@item (byte displacement)
-@kbd{bsbb @dots{}}
-@item (word displacement)
-@kbd{bsbw @dots{}}
-@item (long displacement)
-@kbd{jsb @dots{}}
-@end table
-@item jbr
-@itemx jr
-Unconditional branch.
-@table @asis
-@item (byte displacement)
-@kbd{brb @dots{}}
-@item (word displacement)
-@kbd{brw @dots{}}
-@item (long displacement)
-@kbd{jmp @dots{}}
-@end table
-@item j@var{COND}
-@var{COND} may be any one of the conditional branches
-@code{neq}, @code{nequ}, @code{eql}, @code{eqlu}, @code{gtr},
-@code{geq}, @code{lss}, @code{gtru}, @code{lequ}, @code{vc}, @code{vs},
-@code{gequ}, @code{cc}, @code{lssu}, @code{cs}.
-@var{COND} may also be one of the bit tests
-@code{bs}, @code{bc}, @code{bss}, @code{bcs}, @code{bsc}, @code{bcc},
-@code{bssi}, @code{bcci}, @code{lbs}, @code{lbc}.
-@var{NOTCOND} is the opposite condition to @var{COND}.
-@table @asis
-@item (byte displacement)
-@kbd{b@var{COND} @dots{}}
-@item (word displacement)
-@kbd{b@var{NOTCOND} foo ; brw @dots{} ; foo:}
-@item (long displacement)
-@kbd{b@var{NOTCOND} foo ; jmp @dots{} ; foo:}
-@end table
-@item jacb@var{X}
-@var{X} may be one of @code{b d f g h l w}.
-@table @asis
-@item (word displacement)
-@kbd{@var{OPCODE} @dots{}}
-@item (long displacement)
-@example
-@var{OPCODE} @dots{}, foo ;
-brb bar ;
-foo: jmp @dots{} ;
-bar:
-@end example
-@end table
-@item jaob@var{YYY}
-@var{YYY} may be one of @code{lss leq}.
-@item jsob@var{ZZZ}
-@var{ZZZ} may be one of @code{geq gtr}.
-@table @asis
-@item (byte displacement)
-@kbd{@var{OPCODE} @dots{}}
-@item (word displacement)
-@example
-@var{OPCODE} @dots{}, foo ;
-brb bar ;
-foo: brw @var{destination} ;
-bar:
-@end example
-@item (long displacement)
-@example
-@var{OPCODE} @dots{}, foo ;
-brb bar ;
-foo: jmp @var{destination} ;
-bar:
-@end example
-@end table
-@item aobleq
-@itemx aoblss
-@itemx sobgeq
-@itemx sobgtr
-@table @asis
-@item (byte displacement)
-@kbd{@var{OPCODE} @dots{}}
-@item (word displacement)
-@example
-@var{OPCODE} @dots{}, foo ;
-brb bar ;
-foo: brw @var{destination} ;
-bar:
-@end example
-@item (long displacement)
-@example
-@var{OPCODE} @dots{}, foo ;
-brb bar ;
-foo: jmp @var{destination} ;
-bar:
-@end example
-@end table
-@end table
-
-@node VAX-operands
-@section VAX Operands
-
-@cindex VAX operand notation
-@cindex operand notation, VAX
-@cindex immediate character, VAX
-@cindex VAX immediate character
-The immediate character is @samp{$} for Unix compatibility, not
-@samp{#} as DEC writes it.
-
-@cindex indirect character, VAX
-@cindex VAX indirect character
-The indirect character is @samp{*} for Unix compatibility, not
-@samp{@@} as DEC writes it.
-
-@cindex displacement sizing character, VAX
-@cindex VAX displacement sizing character
-The displacement sizing character is @samp{`} (an accent grave) for
-Unix compatibility, not @samp{^} as DEC writes it. The letter
-preceding @samp{`} may have either case. @samp{G} is not
-understood, but all other letters (@code{b i l s w}) are understood.
-
-@cindex register names, VAX
-@cindex VAX register names
-Register names understood are @code{r0 r1 r2 @dots{} r15 ap fp sp
-pc}. Upper and lower case letters are equivalent.
-
-For instance
-@smallexample
-tstb *w`$4(r5)
-@end smallexample
-
-Any expression is permitted in an operand. Operands are comma
-separated.
-
-@c There is some bug to do with recognizing expressions
-@c in operands, but I forget what it is. It is
-@c a syntax clash because () is used as an address mode
-@c and to encapsulate sub-expressions.
-
-@node VAX-no
-@section Not Supported on VAX
-
-@cindex VAX bitfields not supported
-@cindex bitfields, not supported on VAX
-Vax bit fields can not be assembled with @code{@value{AS}}. Someone
-can add the required code if they really need it.
-
+@include c-arc.texi
@end ifset
@ifset A29K
-@ifset GENERIC
-@page
-@node AMD29K-Dependent
-@chapter AMD 29K Dependent Features
+@include c-a29k.texi
@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter AMD 29K Dependent Features
-@end ifclear
-
-@cindex AMD 29K support
-@cindex 29K support
-@menu
-* AMD29K Options:: Options
-* AMD29K Syntax:: Syntax
-* AMD29K Floating Point:: Floating Point
-* AMD29K Directives:: AMD 29K Machine Directives
-* AMD29K Opcodes:: Opcodes
-@end menu
-
-@node AMD29K Options
-@section Options
-@cindex AMD 29K options (none)
-@cindex options for AMD29K (none)
-@code{@value{AS}} has no additional command-line options for the AMD
-29K family.
-
-@node AMD29K Syntax
-@section Syntax
-@menu
-* AMD29K-Chars:: Special Characters
-* AMD29K-Regs:: Register Names
-@end menu
-
-@node AMD29K-Chars
-@subsection Special Characters
-
-@cindex line comment character, AMD 29K
-@cindex AMD 29K line comment character
-@samp{;} is the line comment character.
-
-@cindex line separator, AMD 29K
-@cindex AMD 29K line separator
-@cindex statement separator, AMD 29K
-@cindex AMD 29K statement separator
-@samp{@@} can be used instead of a newline to separate statements.
-
-@cindex identifiers, AMD 29K
-@cindex AMD 29K identifiers
-The character @samp{?} is permitted in identifiers (but may not begin
-an identifier).
-
-@node AMD29K-Regs
-@subsection Register Names
-
-@cindex AMD 29K register names
-@cindex register names, AMD 29K
-General-purpose registers are represented by predefined symbols of the
-form @samp{GR@var{nnn}} (for global registers) or @samp{LR@var{nnn}}
-(for local registers), where @var{nnn} represents a number between
-@code{0} and @code{127}, written with no leading zeros. The leading
-letters may be in either upper or lower case; for example, @samp{gr13}
-and @samp{LR7} are both valid register names.
-
-You may also refer to general-purpose registers by specifying the
-register number as the result of an expression (prefixed with @samp{%%}
-to flag the expression as a register number):
-@smallexample
-%%@var{expression}
-@end smallexample
-@noindent
----where @var{expression} must be an absolute expression evaluating to a
-number between @code{0} and @code{255}. The range [0, 127] refers to
-global registers, and the range [128, 255] to local registers.
-
-@cindex special purpose registers, AMD 29K
-@cindex AMD 29K special purpose registers
-@cindex protected registers, AMD 29K
-@cindex AMD 29K protected registers
-In addition, @code{@value{AS}} understands the following protected
-special-purpose register names for the AMD 29K family:
-
-@smallexample
- vab chd pc0
- ops chc pc1
- cps rbp pc2
- cfg tmc mmu
- cha tmr lru
-@end smallexample
-
-These unprotected special-purpose register names are also recognized:
-@smallexample
- ipc alu fpe
- ipa bp inte
- ipb fc fps
- q cr exop
-@end smallexample
-
-@node AMD29K Floating Point
-@section Floating Point
-
-@cindex floating point, AMD 29K (@sc{ieee})
-@cindex AMD 29K floating point (@sc{ieee})
-The AMD 29K family uses @sc{ieee} floating-point numbers.
-
-@node AMD29K Directives
-@section AMD 29K Machine Directives
-
-@cindex machine directives, AMD 29K
-@cindex AMD 29K machine directives
-@table @code
-@item .block @var{size} , @var{fill}
-@cindex @code{block} directive, AMD 29K
-This directive emits @var{size} bytes, each of value @var{fill}. Both
-@var{size} and @var{fill} are absolute expressions. If the comma
-and @var{fill} are omitted, @var{fill} is assumed to be zero.
-
-In other versions of the @sc{gnu} assembler, this directive is called
-@samp{.space}.
-@end table
-
-@table @code
-@item .cputype
-@cindex @code{cputype} directive, AMD 29K
-This directive is ignored; it is accepted for compatibility with other
-AMD 29K assemblers.
-
-@item .file
-@cindex @code{file} directive, AMD 29K
-This directive is ignored; it is accepted for compatibility with other
-AMD 29K assemblers.
-
-@quotation
-@emph{Warning:} in other versions of the @sc{gnu} assembler, @code{.file} is
-used for the directive called @code{.app-file} in the AMD 29K support.
-@end quotation
-
-@item .line
-@cindex @code{line} directive, AMD 29K
-This directive is ignored; it is accepted for compatibility with other
-AMD 29K assemblers.
-
-@ignore
-@c since we're ignoring .lsym...
-@item .reg @var{symbol}, @var{expression}
-@cindex @code{reg} directive, AMD 29K
-@code{.reg} has the same effect as @code{.lsym}; @pxref{Lsym,,@code{.lsym}}.
-@end ignore
-
-@item .sect
-@cindex @code{sect} directive, AMD 29K
-This directive is ignored; it is accepted for compatibility with other
-AMD 29K assemblers.
-
-@item .use @var{section name}
-@cindex @code{use} directive, AMD 29K
-Establishes the section and subsection for the following code;
-@var{section name} may be one of @code{.text}, @code{.data},
-@code{.data1}, or @code{.lit}. With one of the first three @var{section
-name} options, @samp{.use} is equivalent to the machine directive
-@var{section name}; the remaining case, @samp{.use .lit}, is the same as
-@samp{.data 200}.
-@end table
-
-@node AMD29K Opcodes
-@section Opcodes
-
-@cindex AMD 29K opcodes
-@cindex opcodes for AMD 29K
-@code{@value{AS}} implements all the standard AMD 29K opcodes. No
-additional pseudo-instructions are needed on this family.
-
-For information on the 29K machine instruction set, see @cite{Am29000
-User's Manual}, Advanced Micro Devices, Inc.
+@ifset ARM
+@include c-arm.texi
@end ifset
+
@ifset Hitachi-all
@ifclear GENERIC
@node Machine Dependencies
The machine instruction sets are different on each Hitachi chip family,
and there are also some syntax differences among the families. This
chapter describes the specific @code{@value{AS}} features for each
-family.
-
-@menu
-* H8/300-Dependent:: Hitachi H8/300 Dependent Features
-* H8/500-Dependent:: Hitachi H8/500 Dependent Features
-* SH-Dependent:: Hitachi SH Dependent Features
-@end menu
-@lowersections
-@end ifclear
-@end ifset
-
-@ifset H8/300
-@ifset GENERIC
-@page
-@end ifset
-@node H8/300-Dependent
-@chapter H8/300 Dependent Features
-
-@cindex H8/300 support
-@menu
-* H8/300 Options:: Options
-* H8/300 Syntax:: Syntax
-* H8/300 Floating Point:: Floating Point
-* H8/300 Directives:: H8/300 Machine Directives
-* H8/300 Opcodes:: Opcodes
-@end menu
-
-@node H8/300 Options
-@section Options
-
-@cindex H8/300 options (none)
-@cindex options, H8/300 (none)
-@code{@value{AS}} has no additional command-line options for the Hitachi
-H8/300 family.
-
-@node H8/300 Syntax
-@section Syntax
-@menu
-* H8/300-Chars:: Special Characters
-* H8/300-Regs:: Register Names
-* H8/300-Addressing:: Addressing Modes
-@end menu
-
-@node H8/300-Chars
-@subsection Special Characters
-
-@cindex line comment character, H8/300
-@cindex H8/300 line comment character
-@samp{;} is the line comment character.
-
-@cindex line separator, H8/300
-@cindex statement separator, H8/300
-@cindex H8/300 line separator
-@samp{$} can be used instead of a newline to separate statements.
-Therefore @emph{you may not use @samp{$} in symbol names} on the H8/300.
-
-@node H8/300-Regs
-@subsection Register Names
-
-@cindex H8/300 registers
-@cindex register names, H8/300
-You can use predefined symbols of the form @samp{r@var{n}h} and
-@samp{r@var{n}l} to refer to the H8/300 registers as sixteen 8-bit
-general-purpose registers. @var{n} is a digit from @samp{0} to
-@samp{7}); for instance, both @samp{r0h} and @samp{r7l} are valid
-register names.
-
-You can also use the eight predefined symbols @samp{r@var{n}} to refer
-to the H8/300 registers as 16-bit registers (you must use this form for
-addressing).
-
-On the H8/300H, you can also use the eight predefined symbols
-@samp{er@var{n}} (@samp{er0} @dots{} @samp{er7}) to refer to the 32-bit
-general purpose registers.
-
-The two control registers are called @code{pc} (program counter; a
-16-bit register, except on the H8/300H where it is 24 bits) and
-@code{ccr} (condition code register; an 8-bit register). @code{r7} is
-used as the stack pointer, and can also be called @code{sp}.
-
-@node H8/300-Addressing
-@subsection Addressing Modes
-
-@cindex addressing modes, H8/300
-@cindex H8/300 addressing modes
-@value{AS} understands the following addressing modes for the H8/300:
-@table @code
-@item r@var{n}
-Register direct
-
-@item @@r@var{n}
-Register indirect
-
-@item @@(@var{d}, r@var{n})
-@itemx @@(@var{d}:16, r@var{n})
-@itemx @@(@var{d}:24, r@var{n})
-Register indirect: 16-bit or 24-bit displacement @var{d} from register
-@var{n}. (24-bit displacements are only meaningful on the H8/300H.)
-
-@item @@r@var{n}+
-Register indirect with post-increment
-
-@item @@-r@var{n}
-Register indirect with pre-decrement
-
-@item @code{@@}@var{aa}
-@itemx @code{@@}@var{aa}:8
-@itemx @code{@@}@var{aa}:16
-@itemx @code{@@}@var{aa}:24
-Absolute address @code{aa}. (The address size @samp{:24} only makes
-sense on the H8/300H.)
-
-@item #@var{xx}
-@itemx #@var{xx}:8
-@itemx #@var{xx}:16
-@itemx #@var{xx}:32
-Immediate data @var{xx}. You may specify the @samp{:8}, @samp{:16}, or
-@samp{:32} for clarity, if you wish; but @code{@value{AS}} neither
-requires this nor uses it---the data size required is taken from
-context.
-
-@item @code{@@}@code{@@}@var{aa}
-@itemx @code{@@}@code{@@}@var{aa}:8
-Memory indirect. You may specify the @samp{:8} for clarity, if you
-wish; but @code{@value{AS}} neither requires this nor uses it.
-@end table
-
-@node H8/300 Floating Point
-@section Floating Point
-
-@cindex floating point, H8/300 (@sc{ieee})
-@cindex H8/300 floating point (@sc{ieee})
-The H8/300 family has no hardware floating point, but the @code{.float}
-directive generates @sc{ieee} floating-point numbers for compatibility
-with other development tools.
-
-@page
-@node H8/300 Directives
-@section H8/300 Machine Directives
-
-@cindex H8/300 machine directives (none)
-@cindex machine directives, H8/300 (none)
-@cindex @code{word} directive, H8/300
-@cindex @code{int} directive, H8/300
-@code{@value{AS}} has only one machine-dependent directive for the
-H8/300:
-
-@table @code
-@cindex H8/300H, assembling for
-@item .h8300h
-Recognize and emit additional instructions for the H8/300H variant, and
-also make @code{.int} emit 32-bit numbers rather than the usual (16-bit)
-for the H8/300 family.
-@end table
-
-On the H8/300 family (including the H8/300H) @samp{.word} directives
-generate 16-bit numbers.
-
-@node H8/300 Opcodes
-@section Opcodes
-
-@cindex H8/300 opcode summary
-@cindex opcode summary, H8/300
-@cindex mnemonics, H8/300
-@cindex instruction summary, H8/300
-For detailed information on the H8/300 machine instruction set, see
-@cite{H8/300 Series Programming Manual} (Hitachi ADE--602--025). For
-information specific to the H8/300H, see @cite{H8/300H Series
-Programming Manual} (Hitachi).
-
-@code{@value{AS}} implements all the standard H8/300 opcodes. No additional
-pseudo-instructions are needed on this family.
-
-@ifset SMALL
-@c this table, due to the multi-col faking and hardcoded order, looks silly
-@c except in smallbook. See comments below "@set SMALL" near top of this file.
-
-The following table summarizes the H8/300 opcodes, and their arguments.
-Entries marked @samp{*} are opcodes used only on the H8/300H.
-
-@smallexample
-@c Using @group seems to use the normal baselineskip, not the smallexample
-@c baselineskip; looks approx doublespaced.
- @i{Legend:}
- Rs @r{source register}
- Rd @r{destination register}
- abs @r{absolute address}
- imm @r{immediate data}
- disp:N @r{N-bit displacement from a register}
- pcrel:N @r{N-bit displacement relative to program counter}
-
- add.b #imm,rd * andc #imm,ccr
- add.b rs,rd band #imm,rd
- add.w rs,rd band #imm,@@rd
-* add.w #imm,rd band #imm,@@abs:8
-* add.l rs,rd bra pcrel:8
-* add.l #imm,rd * bra pcrel:16
- adds #imm,rd bt pcrel:8
- addx #imm,rd * bt pcrel:16
- addx rs,rd brn pcrel:8
- and.b #imm,rd * brn pcrel:16
- and.b rs,rd bf pcrel:8
-* and.w rs,rd * bf pcrel:16
-* and.w #imm,rd bhi pcrel:8
-* and.l #imm,rd * bhi pcrel:16
-* and.l rs,rd bls pcrel:8
-@page
-* bls pcrel:16 bld #imm,rd
- bcc pcrel:8 bld #imm,@@rd
-* bcc pcrel:16 bld #imm,@@abs:8
- bhs pcrel:8 bnot #imm,rd
-* bhs pcrel:16 bnot #imm,@@rd
- bcs pcrel:8 bnot #imm,@@abs:8
-* bcs pcrel:16 bnot rs,rd
- blo pcrel:8 bnot rs,@@rd
-* blo pcrel:16 bnot rs,@@abs:8
- bne pcrel:8 bor #imm,rd
-* bne pcrel:16 bor #imm,@@rd
- beq pcrel:8 bor #imm,@@abs:8
-* beq pcrel:16 bset #imm,rd
- bvc pcrel:8 bset #imm,@@rd
-* bvc pcrel:16 bset #imm,@@abs:8
- bvs pcrel:8 bset rs,rd
-* bvs pcrel:16 bset rs,@@rd
- bpl pcrel:8 bset rs,@@abs:8
-* bpl pcrel:16 bsr pcrel:8
- bmi pcrel:8 bsr pcrel:16
-* bmi pcrel:16 bst #imm,rd
- bge pcrel:8 bst #imm,@@rd
-* bge pcrel:16 bst #imm,@@abs:8
- blt pcrel:8 btst #imm,rd
-* blt pcrel:16 btst #imm,@@rd
- bgt pcrel:8 btst #imm,@@abs:8
-* bgt pcrel:16 btst rs,rd
- ble pcrel:8 btst rs,@@rd
-* ble pcrel:16 btst rs,@@abs:8
- bclr #imm,rd bxor #imm,rd
- bclr #imm,@@rd bxor #imm,@@rd
- bclr #imm,@@abs:8 bxor #imm,@@abs:8
- bclr rs,rd cmp.b #imm,rd
- bclr rs,@@rd cmp.b rs,rd
- bclr rs,@@abs:8 cmp.w rs,rd
- biand #imm,rd cmp.w rs,rd
- biand #imm,@@rd * cmp.w #imm,rd
- biand #imm,@@abs:8 * cmp.l #imm,rd
- bild #imm,rd * cmp.l rs,rd
- bild #imm,@@rd daa rs
- bild #imm,@@abs:8 das rs
- bior #imm,rd dec.b rs
- bior #imm,@@rd * dec.w #imm,rd
- bior #imm,@@abs:8 * dec.l #imm,rd
- bist #imm,rd divxu.b rs,rd
- bist #imm,@@rd * divxu.w rs,rd
- bist #imm,@@abs:8 * divxs.b rs,rd
- bixor #imm,rd * divxs.w rs,rd
- bixor #imm,@@rd eepmov
- bixor #imm,@@abs:8 * eepmovw
-@page
-* exts.w rd mov.w rs,@@abs:16
-* exts.l rd * mov.l #imm,rd
-* extu.w rd * mov.l rs,rd
-* extu.l rd * mov.l @@rs,rd
- inc rs * mov.l @@(disp:16,rs),rd
-* inc.w #imm,rd * mov.l @@(disp:24,rs),rd
-* inc.l #imm,rd * mov.l @@rs+,rd
- jmp @@rs * mov.l @@abs:16,rd
- jmp abs * mov.l @@abs:24,rd
- jmp @@@@abs:8 * mov.l rs,@@rd
- jsr @@rs * mov.l rs,@@(disp:16,rd)
- jsr abs * mov.l rs,@@(disp:24,rd)
- jsr @@@@abs:8 * mov.l rs,@@-rd
- ldc #imm,ccr * mov.l rs,@@abs:16
- ldc rs,ccr * mov.l rs,@@abs:24
-* ldc @@abs:16,ccr movfpe @@abs:16,rd
-* ldc @@abs:24,ccr movtpe rs,@@abs:16
-* ldc @@(disp:16,rs),ccr mulxu.b rs,rd
-* ldc @@(disp:24,rs),ccr * mulxu.w rs,rd
-* ldc @@rs+,ccr * mulxs.b rs,rd
-* ldc @@rs,ccr * mulxs.w rs,rd
-* mov.b @@(disp:24,rs),rd neg.b rs
-* mov.b rs,@@(disp:24,rd) * neg.w rs
- mov.b @@abs:16,rd * neg.l rs
- mov.b rs,rd nop
- mov.b @@abs:8,rd not.b rs
- mov.b rs,@@abs:8 * not.w rs
- mov.b rs,rd * not.l rs
- mov.b #imm,rd or.b #imm,rd
- mov.b @@rs,rd or.b rs,rd
- mov.b @@(disp:16,rs),rd * or.w #imm,rd
- mov.b @@rs+,rd * or.w rs,rd
- mov.b @@abs:8,rd * or.l #imm,rd
- mov.b rs,@@rd * or.l rs,rd
- mov.b rs,@@(disp:16,rd) orc #imm,ccr
- mov.b rs,@@-rd pop.w rs
- mov.b rs,@@abs:8 * pop.l rs
- mov.w rs,@@rd push.w rs
-* mov.w @@(disp:24,rs),rd * push.l rs
-* mov.w rs,@@(disp:24,rd) rotl.b rs
-* mov.w @@abs:24,rd * rotl.w rs
-* mov.w rs,@@abs:24 * rotl.l rs
- mov.w rs,rd rotr.b rs
- mov.w #imm,rd * rotr.w rs
- mov.w @@rs,rd * rotr.l rs
- mov.w @@(disp:16,rs),rd rotxl.b rs
- mov.w @@rs+,rd * rotxl.w rs
- mov.w @@abs:16,rd * rotxl.l rs
- mov.w rs,@@(disp:16,rd) rotxr.b rs
- mov.w rs,@@-rd * rotxr.w rs
-@page
-* rotxr.l rs * stc ccr,@@(disp:24,rd)
- bpt * stc ccr,@@-rd
- rte * stc ccr,@@abs:16
- rts * stc ccr,@@abs:24
- shal.b rs sub.b rs,rd
-* shal.w rs sub.w rs,rd
-* shal.l rs * sub.w #imm,rd
- shar.b rs * sub.l rs,rd
-* shar.w rs * sub.l #imm,rd
-* shar.l rs subs #imm,rd
- shll.b rs subx #imm,rd
-* shll.w rs subx rs,rd
-* shll.l rs * trapa #imm
- shlr.b rs xor #imm,rd
-* shlr.w rs xor rs,rd
-* shlr.l rs * xor.w #imm,rd
- sleep * xor.w rs,rd
- stc ccr,rd * xor.l #imm,rd
-* stc ccr,@@rs * xor.l rs,rd
-* stc ccr,@@(disp:16,rd) xorc #imm,ccr
-@end smallexample
-@end ifset
-
-@cindex size suffixes, H8/300
-@cindex H8/300 size suffixes
-Four H8/300 instructions (@code{add}, @code{cmp}, @code{mov},
-@code{sub}) are defined with variants using the suffixes @samp{.b},
-@samp{.w}, and @samp{.l} to specify the size of a memory operand.
-@code{@value{AS}} supports these suffixes, but does not require them;
-since one of the operands is always a register, @code{@value{AS}} can
-deduce the correct size.
-
-For example, since @code{r0} refers to a 16-bit register,
-@example
-mov r0,@@foo
-@exdent is equivalent to
-mov.w r0,@@foo
-@end example
-
-If you use the size suffixes, @code{@value{AS}} issues a warning when
-the suffix and the register size do not match.
-@end ifset
-
-@ifset H8/500
-@page
-@node H8/500-Dependent
-@chapter H8/500 Dependent Features
-
-@cindex H8/500 support
-@menu
-* H8/500 Options:: Options
-* H8/500 Syntax:: Syntax
-* H8/500 Floating Point:: Floating Point
-* H8/500 Directives:: H8/500 Machine Directives
-* H8/500 Opcodes:: Opcodes
-@end menu
-
-@node H8/500 Options
-@section Options
-
-@cindex H8/500 options (none)
-@cindex options, H8/500 (none)
-@code{@value{AS}} has no additional command-line options for the Hitachi
-H8/500 family.
-
-@node H8/500 Syntax
-@section Syntax
-
-@menu
-* H8/500-Chars:: Special Characters
-* H8/500-Regs:: Register Names
-* H8/500-Addressing:: Addressing Modes
-@end menu
-
-@node H8/500-Chars
-@subsection Special Characters
-
-@cindex line comment character, H8/500
-@cindex H8/500 line comment character
-@samp{!} is the line comment character.
-
-@cindex line separator, H8/500
-@cindex statement separator, H8/500
-@cindex H8/500 line separator
-@samp{;} can be used instead of a newline to separate statements.
-
-@cindex symbol names, @samp{$} in
-@cindex @code{$} in symbol names
-Since @samp{$} has no special meaning, you may use it in symbol names.
-
-@node H8/500-Regs
-@subsection Register Names
-
-@cindex H8/500 registers
-@cindex registers, H8/500
-You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2},
-@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, and @samp{r7} to refer to
-the H8/500 registers.
-
-The H8/500 also has these control registers:
-
-@table @code
-@item cp
-code pointer
-
-@item dp
-data pointer
-
-@item bp
-base pointer
-
-@item tp
-stack top pointer
-
-@item ep
-extra pointer
-
-@item sr
-status register
-
-@item ccr
-condition code register
-@end table
-
-All registers are 16 bits long. To represent 32 bit numbers, use two
-adjacent registers; for distant memory addresses, use one of the segment
-pointers (@code{cp} for the program counter; @code{dp} for
-@code{r0}--@code{r3}; @code{ep} for @code{r4} and @code{r5}; and
-@code{tp} for @code{r6} and @code{r7}.
-
-@node H8/500-Addressing
-@subsection Addressing Modes
-
-@cindex addressing modes, H8/500
-@cindex H8/500 addressing modes
-@value{AS} understands the following addressing modes for the H8/500:
-@table @code
-@item R@var{n}
-Register direct
-
-@item @@R@var{n}
-Register indirect
-
-@item @@(d:8, R@var{n})
-Register indirect with 8 bit signed displacement
-
-@item @@(d:16, R@var{n})
-Register indirect with 16 bit signed displacement
-
-@item @@-R@var{n}
-Register indirect with pre-decrement
-
-@item @@R@var{n}+
-Register indirect with post-increment
-
-@item @@@var{aa}:8
-8 bit absolute address
-
-@item @@@var{aa}:16
-16 bit absolute address
-
-@item #@var{xx}:8
-8 bit immediate
-
-@item #@var{xx}:16
-16 bit immediate
-@end table
-
-@node H8/500 Floating Point
-@section Floating Point
-
-@cindex floating point, H8/500 (@sc{ieee})
-@cindex H8/500 floating point (@sc{ieee})
-The H8/500 family has no hardware floating point, but the @code{.float}
-directive generates @sc{ieee} floating-point numbers for compatibility
-with other development tools.
-
-@node H8/500 Directives
-@section H8/500 Machine Directives
-
-@cindex H8/500 machine directives (none)
-@cindex machine directives, H8/500 (none)
-@cindex @code{word} directive, H8/500
-@cindex @code{int} directive, H8/500
-@code{@value{AS}} has no machine-dependent directives for the H8/500.
-However, on this platform the @samp{.int} and @samp{.word} directives
-generate 16-bit numbers.
-
-@node H8/500 Opcodes
-@section Opcodes
-
-@cindex H8/500 opcode summary
-@cindex opcode summary, H8/500
-@cindex mnemonics, H8/500
-@cindex instruction summary, H8/500
-For detailed information on the H8/500 machine instruction set, see
-@cite{H8/500 Series Programming Manual} (Hitachi M21T001).
-
-@code{@value{AS}} implements all the standard H8/500 opcodes. No additional
-pseudo-instructions are needed on this family.
-
-@ifset SMALL
-@c this table, due to the multi-col faking and hardcoded order, looks silly
-@c except in smallbook. See comments below "@set SMALL" near top of this file.
-
-The following table summarizes H8/500 opcodes and their operands:
-
-@c Use @group if it ever works, instead of @page
-@page
-@smallexample
-@i{Legend:}
-abs8 @r{8-bit absolute address}
-abs16 @r{16-bit absolute address}
-abs24 @r{24-bit absolute address}
-crb @r{@code{ccr}, @code{br}, @code{ep}, @code{dp}, @code{tp}, @code{dp}}
-disp8 @r{8-bit displacement}
-ea @r{@code{rn}, @code{@@rn}, @code{@@(d:8, rn)}, @code{@@(d:16, rn)},}
- @r{@code{@@-rn}, @code{@@rn+}, @code{@@aa:8}, @code{@@aa:16},}
- @r{@code{#xx:8}, @code{#xx:16}}
-ea_mem @r{@code{@@rn}, @code{@@(d:8, rn)}, @code{@@(d:16, rn)},}
- @r{@code{@@-rn}, @code{@@rn+}, @code{@@aa:8}, @code{@@aa:16}}
-ea_noimm @r{@code{rn}, @code{@@rn}, @code{@@(d:8, rn)}, @code{@@(d:16, rn)},}
- @r{@code{@@-rn}, @code{@@rn+}, @code{@@aa:8}, @code{@@aa:16}}
-fp r6
-imm4 @r{4-bit immediate data}
-imm8 @r{8-bit immediate data}
-imm16 @r{16-bit immediate data}
-pcrel8 @r{8-bit offset from program counter}
-pcrel16 @r{16-bit offset from program counter}
-qim @r{@code{-2}, @code{-1}, @code{1}, @code{2}}
-rd @r{any register}
-rs @r{a register distinct from rd}
-rlist @r{comma-separated list of registers in parentheses;}
- @r{register ranges @code{rd-rs} are allowed}
-sp @r{stack pointer (@code{r7})}
-sr @r{status register}
-sz @r{size; @samp{.b} or @samp{.w}. If omitted, default @samp{.w}}
-
-ldc[.b] ea,crb bcc[.w] pcrel16
-ldc[.w] ea,sr bcc[.b] pcrel8
-add[:q] sz qim,ea_noimm bhs[.w] pcrel16
-add[:g] sz ea,rd bhs[.b] pcrel8
-adds sz ea,rd bcs[.w] pcrel16
-addx sz ea,rd bcs[.b] pcrel8
-and sz ea,rd blo[.w] pcrel16
-andc[.b] imm8,crb blo[.b] pcrel8
-andc[.w] imm16,sr bne[.w] pcrel16
-bpt bne[.b] pcrel8
-bra[.w] pcrel16 beq[.w] pcrel16
-bra[.b] pcrel8 beq[.b] pcrel8
-bt[.w] pcrel16 bvc[.w] pcrel16
-bt[.b] pcrel8 bvc[.b] pcrel8
-brn[.w] pcrel16 bvs[.w] pcrel16
-brn[.b] pcrel8 bvs[.b] pcrel8
-bf[.w] pcrel16 bpl[.w] pcrel16
-bf[.b] pcrel8 bpl[.b] pcrel8
-bhi[.w] pcrel16 bmi[.w] pcrel16
-bhi[.b] pcrel8 bmi[.b] pcrel8
-bls[.w] pcrel16 bge[.w] pcrel16
-bls[.b] pcrel8 bge[.b] pcrel8
-@page
-blt[.w] pcrel16 mov[:g][.b] imm8,ea_mem
-blt[.b] pcrel8 mov[:g][.w] imm16,ea_mem
-bgt[.w] pcrel16 movfpe[.b] ea,rd
-bgt[.b] pcrel8 movtpe[.b] rs,ea_noimm
-ble[.w] pcrel16 mulxu sz ea,rd
-ble[.b] pcrel8 neg sz ea
-bclr sz imm4,ea_noimm nop
-bclr sz rs,ea_noimm not sz ea
-bnot sz imm4,ea_noimm or sz ea,rd
-bnot sz rs,ea_noimm orc[.b] imm8,crb
-bset sz imm4,ea_noimm orc[.w] imm16,sr
-bset sz rs,ea_noimm pjmp abs24
-bsr[.b] pcrel8 pjmp @@rd
-bsr[.w] pcrel16 pjsr abs24
-btst sz imm4,ea_noimm pjsr @@rd
-btst sz rs,ea_noimm prtd imm8
-clr sz ea prtd imm16
-cmp[:e][.b] imm8,rd prts
-cmp[:i][.w] imm16,rd rotl sz ea
-cmp[:g].b imm8,ea_noimm rotr sz ea
-cmp[:g][.w] imm16,ea_noimm rotxl sz ea
-Cmp[:g] sz ea,rd rotxr sz ea
-dadd rs,rd rtd imm8
-divxu sz ea,rd rtd imm16
-dsub rs,rd rts
-exts[.b] rd scb/f rs,pcrel8
-extu[.b] rd scb/ne rs,pcrel8
-jmp @@rd scb/eq rs,pcrel8
-jmp @@(imm8,rd) shal sz ea
-jmp @@(imm16,rd) shar sz ea
-jmp abs16 shll sz ea
-jsr @@rd shlr sz ea
-jsr @@(imm8,rd) sleep
-jsr @@(imm16,rd) stc[.b] crb,ea_noimm
-jsr abs16 stc[.w] sr,ea_noimm
-ldm @@sp+,(rlist) stm (rlist),@@-sp
-link fp,imm8 sub sz ea,rd
-link fp,imm16 subs sz ea,rd
-mov[:e][.b] imm8,rd subx sz ea,rd
-mov[:i][.w] imm16,rd swap[.b] rd
-mov[:l][.w] abs8,rd tas[.b] ea
-mov[:l].b abs8,rd trapa imm4
-mov[:s][.w] rs,abs8 trap/vs
-mov[:s].b rs,abs8 tst sz ea
-mov[:f][.w] @@(disp8,fp),rd unlk fp
-mov[:f][.w] rs,@@(disp8,fp) xch[.w] rs,rd
-mov[:f].b @@(disp8,fp),rd xor sz ea,rd
-mov[:f].b rs,@@(disp8,fp) xorc.b imm8,crb
-mov[:g] sz rs,ea_mem xorc.w imm16,sr
-mov[:g] sz ea,rd
-@end smallexample
-@end ifset
-@end ifset
-
-@ifset HPPA
-@page
-@node HPPA-Dependent
-@chapter HPPA Dependent Features
-
-@cindex support
-@menu
-* HPPA Notes:: Notes
-* HPPA Options:: Options
-* HPPA Syntax:: Syntax
-* HPPA Floating Point:: Floating Point
-* HPPA Directives:: HPPA Machine Directives
-* HPPA Opcodes:: Opcodes
-@end menu
-
-@node HPPA Notes
-@section Notes
-As a back end for @sc{gnu} @sc{cc} @code{@value{AS}} has been throughly tested and should
-work extremely well. We have tested it only minimally on hand written assembly
-code and no one has tested it much on the assembly output from the HP
-compilers.
-
-The format of the debugging sections has changed since the original
-@code{@value{AS}} port (version 1.3X) was released; therefore,
-you must rebuild all HPPA objects and libraries with the new
-assembler so that you can debug the final executable.
-
-The HPPA @code{@value{AS}} port generates a small subset of the relocations
-available in the SOM and ELF object file formats. Additional relocation
-support will be added as it becomes necessary.
-
-@node HPPA Options
-@section Options
-@code{@value{AS}} has no machine-dependent command-line options for the HPPA.
-
-@cindex HPPA Syntax
-@node HPPA Syntax
-@section Syntax
-The assembler syntax closely follows the HPPA instruction set
-reference manual; assembler directives and general syntax closely follow the
-HPPA assembly language reference manual, with a few noteworthy differences.
-
-First, a colon may immediately follow a label definition. This is
-simply for compatibility with how most assembly language programmers
-write code.
-
-Some obscure expression parsing problems may affect hand written code which
-uses the @code{spop} instructions, or code which makes significant
-use of the @code{!} line separator.
-
-@code{@value{AS}} is much less forgiving about missing arguments and other
-similar oversights than the HP assembler. @code{@value{AS}} notifies you
-of missing arguments as syntax errors; this is regarded as a feature, not a
-bug.
-
-Finally, @code{@value{AS}} allows you to use an external symbol without
-explicitly importing the symbol. @emph{Warning:} in the future this will be
-an error for HPPA targets.
-
-Special characters for HPPA targets include:
-
-@samp{;} is the line comment character.
-
-@samp{!} can be used instead of a newline to separate statements.
-
-Since @samp{$} has no special meaning, you may use it in symbol names.
-
-@node HPPA Floating Point
-@section Floating Point
-@cindex floating point, HPPA (@sc{ieee})
-@cindex HPPA floating point (@sc{ieee})
-The HPPA family uses @sc{ieee} floating-point numbers.
-
-@node HPPA Directives
-@section HPPA Assembler Directives
-
-@code{@value{AS}} for the HPPA supports many additional directives for
-compatibility with the native assembler. This section describes them only
-briefly. For detailed information on HPPA-specific assembler directives, see
-@cite{HP9000 Series 800 Assembly Language Reference Manual} (HP 92432-90001).
-
-@cindex HPPA directives not supported
-@code{@value{AS}} does @emph{not} support the following assembler directives
-described in the HP manual:
-
-@example
-.endm .liston
-.enter .locct
-.leave .macro
-.listoff
-@end example
-
-@cindex @code{.param} on HPPA
-Beyond those implemented for compatibility, @code{@value{AS}} supports one
-additional assembler directive for the HPPA: @code{.param}. It conveys
-register argument locations for static functions. Its syntax closely follows
-the @code{.export} directive.
-
-@cindex HPPA-only directives
-These are the additional directives in @code{@value{AS}} for the HPPA:
-
-@table @code
-@item .block @var{n}
-@itemx .blockz @var{n}
-Reserve @var{n} bytes of storage, and initialize them to zero.
-
-@item .call
-Mark the beginning of a procedure call. Only the special case with @emph{no
-arguments} is allowed.
-
-@item .callinfo [ @var{param}=@var{value}, @dots{} ] [ @var{flag}, @dots{} ]
-Specify a number of parameters and flags that define the environment for a
-procedure.
-
-@var{param} may be any of @samp{frame} (frame size), @samp{entry_gr} (end of
-general register range), @samp{entry_fr} (end of float register range),
-@samp{entry_sr} (end of space register range).
-
-The values for @var{flag} are @samp{calls} or @samp{caller} (proc has
-subroutines), @samp{no_calls} (proc does not call subroutines), @samp{save_rp}
-(preserve return pointer), @samp{save_sp} (proc preserves stack pointer),
-@samp{no_unwind} (do not unwind this proc), @samp{hpux_int} (proc is interrupt
-routine).
-
-@item .code
-Assemble into the standard section called @samp{$TEXT$}, subsection
-@samp{$CODE$}.
-
-@ifset SOM
-@item .copyright "@var{string}"
-In the SOM object format, insert @var{string} into the object code, marked as a
-copyright string.
-@end ifset
-
-@ifset ELF
-@item .copyright "@var{string}"
-In the ELF object format, insert @var{string} into the object code, marked as a
-version string.
-@end ifset
-
-@item .enter
-Not yet supported; the assembler rejects programs containing this directive.
-
-@item .entry
-Mark the beginning of a procedure.
-
-@item .exit
-Mark the end of a procedure.
-
-@item .export @var{name} [ ,@var{typ} ] [ ,@var{param}=@var{r} ]
-Make a procedure @var{name} available to callers. @var{typ}, if present, must
-be one of @samp{absolute}, @samp{code} (ELF only, not SOM), @samp{data},
-@samp{entry}, @samp{data}, @samp{entry}, @samp{millicode}, @samp{plabel},
-@samp{pri_prog}, or @samp{sec_prog}.
-
-@var{param}, if present, provides either relocation information for the
-procedure arguments and result, or a privilege level. @var{param} may be
-@samp{argw@var{n}} (where @var{n} ranges from @code{0} to @code{3}, and
-indicates one of four one-word arguments); @samp{rtnval} (the procedure's
-result); or @samp{priv_lev} (privilege level). For arguments or the result,
-@var{r} specifies how to relocate, and must be one of @samp{no} (not
-relocatable), @samp{gr} (argument is in general register), @samp{fr} (in
-floating point register), or @samp{fu} (upper half of float register).
-For @samp{priv_lev}, @var{r} is an integer.
-
-@item .half @var{n}
-Define a two-byte integer constant @var{n}; synonym for the portable
-@code{@value{AS}} directive @code{.short}.
-
-@item .import @var{name} [ ,@var{typ} ]
-Converse of @code{.export}; make a procedure available to call. The arguments
-use the same conventions as the first two arguments for @code{.export}.
-
-@item .label @var{name}
-Define @var{name} as a label for the current assembly location.
-
-@item .leave
-Not yet supported; the assembler rejects programs containing this directive.
-
-@item .origin @var{lc}
-Advance location counter to @var{lc}. Synonym for the @code{@value{as}}
-portable directive @code{.org}.
-
-@item .param @var{name} [ ,@var{typ} ] [ ,@var{param}=@var{r} ]
-@c Not in HP manual; GNU HPPA extension
-Similar to @code{.export}, but used for static procedures.
-
-@item .proc
-Use preceding the first statement of a procedure.
-
-@item .procend
-Use following the last statement of a procedure.
-
-@item @var{label} .reg @var{expr}
-@c ?? Not in HP manual (Jan 1988 vn)
-Synonym for @code{.equ}; define @var{label} with the absolute expression
-@var{expr} as its value.
-
-@item .space @var{secname} [ ,@var{params} ]
-Switch to section @var{secname}, creating a new section by that name if
-necessary. You may only use @var{params} when creating a new section, not
-when switching to an existing one. @var{secname} may identify a section by
-number rather than by name.
-
-If specified, the list @var{params} declares attributes of the section,
-identified by keywords. The keywords recognized are @samp{spnum=@var{exp}}
-(identify this section by the number @var{exp}, an absolute expression),
-@samp{sort=@var{exp}} (order sections according to this sort key when linking;
-@var{exp} is an absolute expression), @samp{unloadable} (section contains no
-loadable data), @samp{notdefined} (this section defined elsewhere), and
-@samp{private} (data in this section not available to other programs).
-
-@item .spnum @var{secnam}
-@c ?? Not in HP manual (Jan 1988)
-Allocate four bytes of storage, and initialize them with the section number of
-the section named @var{secnam}. (You can define the section number with the
-HPPA @code{.space} directive.)
-
-@item .string "@var{str}"
-@cindex @code{string} directive on HPPA
-Copy the characters in the string @var{str} to the object file.
-@xref{Strings,,Strings}, for information on escape sequences you can use in
-@code{@value{AS}} strings.
-
-@emph{Warning!} The HPPA version of @code{.string} differs from the
-usual @code{@value{AS}} definition: it does @emph{not} write a zero byte
-after copying @var{str}.
-
-@item .stringz "@var{str}"
-Like @code{.string}, but appends a zero byte after copying @var{str} to object
-file.
-
-@item .subspa @var{name} [ ,@var{params} ]
-Similar to @code{.space}, but selects a subsection @var{name} within the
-current section. You may only specify @var{params} when you create a
-subsection (in the first instance of @code{.subspa} for this @var{name}).
-
-If specified, the list @var{params} declares attributes of the subsection,
-identified by keywords. The keywords recognized are @samp{quad=@var{expr}}
-(``quadrant'' for this subsection), @samp{align=@var{expr}} (alignment for
-beginning of this subsection; a power of two), @samp{access=@var{expr}} (value
-for ``access rights'' field), @samp{sort=@var{expr}} (sorting order for this
-subspace in link), @samp{code_only} (subsection contains only code),
-@samp{unloadable} (subsection cannot be loaded into memory), @samp{common}
-(subsection is common block), @samp{dup_comm} (initialized data may have
-duplicate names), or @samp{zero} (subsection is all zeros, do not write in
-object file).
-
-@item .version "@var{str}"
-Write @var{str} as version identifier in object code.
-@end table
-
-@node HPPA Opcodes
-@section Opcodes
-For detailed information on the HPPA machine instruction set, see
-@cite{PA-RISC Architecture and Instruction Set Reference Manual}
-(HP 09740-90039).
-@end ifset
-
-@ifset SH
-@page
-@node SH-Dependent
-@chapter Hitachi SH Dependent Features
-
-@cindex SH support
-@menu
-* SH Options:: Options
-* SH Syntax:: Syntax
-* SH Floating Point:: Floating Point
-* SH Directives:: SH Machine Directives
-* SH Opcodes:: Opcodes
-@end menu
-
-@node SH Options
-@section Options
-
-@cindex SH options (none)
-@cindex options, SH (none)
-@code{@value{AS}} has no additional command-line options for the Hitachi
-SH family.
-
-@node SH Syntax
-@section Syntax
-
-@menu
-* SH-Chars:: Special Characters
-* SH-Regs:: Register Names
-* SH-Addressing:: Addressing Modes
-@end menu
-
-@node SH-Chars
-@subsection Special Characters
-
-@cindex line comment character, SH
-@cindex SH line comment character
-@samp{!} is the line comment character.
-
-@cindex line separator, SH
-@cindex statement separator, SH
-@cindex SH line separator
-You can use @samp{;} instead of a newline to separate statements.
-
-@cindex symbol names, @samp{$} in
-@cindex @code{$} in symbol names
-Since @samp{$} has no special meaning, you may use it in symbol names.
-
-@node SH-Regs
-@subsection Register Names
-
-@cindex SH registers
-@cindex registers, SH
-You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2},
-@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, @samp{r7}, @samp{r8},
-@samp{r9}, @samp{r10}, @samp{r11}, @samp{r12}, @samp{r13}, @samp{r14},
-and @samp{r15} to refer to the SH registers.
-
-The SH also has these control registers:
-
-@table @code
-@item pr
-procedure register (holds return address)
-
-@item pc
-program counter
-
-@item mach
-@itemx macl
-high and low multiply accumulator registers
-
-@item sr
-status register
-
-@item gbr
-global base register
-
-@item vbr
-vector base register (for interrupt vectors)
-@end table
-
-@node SH-Addressing
-@subsection Addressing Modes
-
-@cindex addressing modes, SH
-@cindex SH addressing modes
-@code{@value{AS}} understands the following addressing modes for the SH.
-@code{R@var{n}} in the following refers to any of the numbered
-registers, but @emph{not} the control registers.
-
-@table @code
-@item R@var{n}
-Register direct
-
-@item @@R@var{n}
-Register indirect
-
-@item @@-R@var{n}
-Register indirect with pre-decrement
-
-@item @@R@var{n}+
-Register indirect with post-increment
-
-@item @@(@var{disp}, R@var{n})
-Register indirect with displacement
-
-@item @@(R0, R@var{n})
-Register indexed
-
-@item @@(@var{disp}, GBR)
-@code{GBR} offset
-
-@item @@(R0, GBR)
-GBR indexed
-
-@item @var{addr}
-@itemx @@(@var{disp}, PC)
-PC relative address (for branch or for addressing memory). The
-@code{@value{AS}} implementation allows you to use the simpler form
-@var{addr} anywhere a PC relative address is called for; the alternate
-form is supported for compatibility with other assemblers.
-
-@item #@var{imm}
-Immediate data
-@end table
-
-@node SH Floating Point
-@section Floating Point
-
-@cindex floating point, SH (@sc{ieee})
-@cindex SH floating point (@sc{ieee})
-The SH family has no hardware floating point, but the @code{.float}
-directive generates @sc{ieee} floating-point numbers for compatibility
-with other development tools.
-
-@node SH Directives
-@section SH Machine Directives
-
-@cindex SH machine directives (none)
-@cindex machine directives, SH (none)
-@cindex @code{word} directive, SH
-@cindex @code{int} directive, SH
-@code{@value{AS}} has no machine-dependent directives for the SH.
-
-@node SH Opcodes
-@section Opcodes
-
-@cindex SH opcode summary
-@cindex opcode summary, SH
-@cindex mnemonics, SH
-@cindex instruction summary, SH
-For detailed information on the SH machine instruction set, see
-@cite{SH-Microcomputer User's Manual} (Hitachi Micro Systems, Inc.).
-
-@code{@value{AS}} implements all the standard SH opcodes. No additional
-pseudo-instructions are needed on this family. Note, however, that
-because @code{@value{AS}} supports a simpler form of PC-relative
-addressing, you may simply write (for example)
-
-@example
-mov.l bar,r0
-@end example
-
-@noindent
-where other assemblers might require an explicit displacement to
-@code{bar} from the program counter:
-
-@example
-mov.l @@(@var{disp}, PC)
-@end example
-
-@ifset SMALL
-@c this table, due to the multi-col faking and hardcoded order, looks silly
-@c except in smallbook. See comments below "@set SMALL" near top of this file.
-
-Here is a summary of SH opcodes:
-
-@page
-@smallexample
-@i{Legend:}
-Rn @r{a numbered register}
-Rm @r{another numbered register}
-#imm @r{immediate data}
-disp @r{displacement}
-disp8 @r{8-bit displacement}
-disp12 @r{12-bit displacement}
-
-add #imm,Rn lds.l @@Rn+,PR
-add Rm,Rn mac.w @@Rm+,@@Rn+
-addc Rm,Rn mov #imm,Rn
-addv Rm,Rn mov Rm,Rn
-and #imm,R0 mov.b Rm,@@(R0,Rn)
-and Rm,Rn mov.b Rm,@@-Rn
-and.b #imm,@@(R0,GBR) mov.b Rm,@@Rn
-bf disp8 mov.b @@(disp,Rm),R0
-bra disp12 mov.b @@(disp,GBR),R0
-bsr disp12 mov.b @@(R0,Rm),Rn
-bt disp8 mov.b @@Rm+,Rn
-clrmac mov.b @@Rm,Rn
-clrt mov.b R0,@@(disp,Rm)
-cmp/eq #imm,R0 mov.b R0,@@(disp,GBR)
-cmp/eq Rm,Rn mov.l Rm,@@(disp,Rn)
-cmp/ge Rm,Rn mov.l Rm,@@(R0,Rn)
-cmp/gt Rm,Rn mov.l Rm,@@-Rn
-cmp/hi Rm,Rn mov.l Rm,@@Rn
-cmp/hs Rm,Rn mov.l @@(disp,Rn),Rm
-cmp/pl Rn mov.l @@(disp,GBR),R0
-cmp/pz Rn mov.l @@(disp,PC),Rn
-cmp/str Rm,Rn mov.l @@(R0,Rm),Rn
-div0s Rm,Rn mov.l @@Rm+,Rn
-div0u mov.l @@Rm,Rn
-div1 Rm,Rn mov.l R0,@@(disp,GBR)
-exts.b Rm,Rn mov.w Rm,@@(R0,Rn)
-exts.w Rm,Rn mov.w Rm,@@-Rn
-extu.b Rm,Rn mov.w Rm,@@Rn
-extu.w Rm,Rn mov.w @@(disp,Rm),R0
-jmp @@Rn mov.w @@(disp,GBR),R0
-jsr @@Rn mov.w @@(disp,PC),Rn
-ldc Rn,GBR mov.w @@(R0,Rm),Rn
-ldc Rn,SR mov.w @@Rm+,Rn
-ldc Rn,VBR mov.w @@Rm,Rn
-ldc.l @@Rn+,GBR mov.w R0,@@(disp,Rm)
-ldc.l @@Rn+,SR mov.w R0,@@(disp,GBR)
-ldc.l @@Rn+,VBR mova @@(disp,PC),R0
-lds Rn,MACH movt Rn
-lds Rn,MACL muls Rm,Rn
-lds Rn,PR mulu Rm,Rn
-lds.l @@Rn+,MACH neg Rm,Rn
-lds.l @@Rn+,MACL negc Rm,Rn
-@page
-nop stc VBR,Rn
-not Rm,Rn stc.l GBR,@@-Rn
-or #imm,R0 stc.l SR,@@-Rn
-or Rm,Rn stc.l VBR,@@-Rn
-or.b #imm,@@(R0,GBR) sts MACH,Rn
-rotcl Rn sts MACL,Rn
-rotcr Rn sts PR,Rn
-rotl Rn sts.l MACH,@@-Rn
-rotr Rn sts.l MACL,@@-Rn
-rte sts.l PR,@@-Rn
-rts sub Rm,Rn
-sett subc Rm,Rn
-shal Rn subv Rm,Rn
-shar Rn swap.b Rm,Rn
-shll Rn swap.w Rm,Rn
-shll16 Rn tas.b @@Rn
-shll2 Rn trapa #imm
-shll8 Rn tst #imm,R0
-shlr Rn tst Rm,Rn
-shlr16 Rn tst.b #imm,@@(R0,GBR)
-shlr2 Rn xor #imm,R0
-shlr8 Rn xor Rm,Rn
-sleep xor.b #imm,@@(R0,GBR)
-stc GBR,Rn xtrct Rm,Rn
-stc SR,Rn
-@end smallexample
-@end ifset
-
-@ifset Hitachi-all
-@ifclear GENERIC
-@raisesections
-@end ifclear
-@end ifset
-
-@end ifset
-@ifset I960
-@ifset GENERIC
-@page
-@node i960-Dependent
-@chapter Intel 80960 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter Intel 80960 Dependent Features
-@end ifclear
-
-@cindex i960 support
-@menu
-* Options-i960:: i960 Command-line Options
-* Floating Point-i960:: Floating Point
-* Directives-i960:: i960 Machine Directives
-* Opcodes for i960:: i960 Opcodes
-@end menu
-
-@c FIXME! Add Syntax sec with discussion of bitfields here, at least so
-@c long as they're not turned on for other machines than 960.
-
-@node Options-i960
-
-@section i960 Command-line Options
-
-@cindex i960 options
-@cindex options, i960
-@table @code
-
-@item -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC
-@cindex i960 architecture options
-@cindex architecture options, i960
-@cindex @code{-A} options, i960
-Select the 80960 architecture. Instructions or features not supported
-by the selected architecture cause fatal errors.
-
-@samp{-ACA} is equivalent to @samp{-ACA_A}; @samp{-AKC} is equivalent to
-@samp{-AMC}. Synonyms are provided for compatibility with other tools.
-
-If you do not specify any of these options, @code{@value{AS}} generates code
-for any instruction or feature that is supported by @emph{some} version of the
-960 (even if this means mixing architectures!). In principle,
-@code{@value{AS}} attempts to deduce the minimal sufficient processor type if
-none is specified; depending on the object code format, the processor type may
-be recorded in the object file. If it is critical that the @code{@value{AS}}
-output match a specific architecture, specify that architecture explicitly.
-
-@item -b
-@cindex @code{-b} option, i960
-@cindex branch recording, i960
-@cindex i960 branch recording
-Add code to collect information about conditional branches taken, for
-later optimization using branch prediction bits. (The conditional branch
-instructions have branch prediction bits in the CA, CB, and CC
-architectures.) If @var{BR} represents a conditional branch instruction,
-the following represents the code generated by the assembler when
-@samp{-b} is specified:
-
-@smallexample
- call @var{increment routine}
- .word 0 # pre-counter
-Label: @var{BR}
- call @var{increment routine}
- .word 0 # post-counter
-@end smallexample
-
-The counter following a branch records the number of times that branch
-was @emph{not} taken; the differenc between the two counters is the
-number of times the branch @emph{was} taken.
-
-@cindex @code{gbr960}, i960 postprocessor
-@cindex branch statistics table, i960
-A table of every such @code{Label} is also generated, so that the
-external postprocessor @code{gbr960} (supplied by Intel) can locate all
-the counters. This table is always labelled @samp{__BRANCH_TABLE__};
-this is a local symbol to permit collecting statistics for many separate
-object files. The table is word aligned, and begins with a two-word
-header. The first word, initialized to 0, is used in maintaining linked
-lists of branch tables. The second word is a count of the number of
-entries in the table, which follow immediately: each is a word, pointing
-to one of the labels illustrated above.
-
-@c TEXI2ROFF-KILL
-@ifinfo
-@c END TEXI2ROFF-KILL
-@example
- +------------+------------+------------+ ... +------------+
- | | | | | |
- | *NEXT | COUNT: N | *BRLAB 1 | | *BRLAB N |
- | | | | | |
- +------------+------------+------------+ ... +------------+
-
- __BRANCH_TABLE__ layout
-@end example
-@c TEXI2ROFF-KILL
-@end ifinfo
-@need 2000
-@tex
-\vskip 1pc
-\line{\leftskip=0pt\hskip\tableindent
-\boxit{2cm}{\tt *NEXT}\boxit{2cm}{\tt COUNT: \it N}\boxit{2cm}{\tt
-*BRLAB 1}\ibox{1cm}{\quad\dots}\boxit{2cm}{\tt *BRLAB \it N}\hfil}
-\centerline{\it {\tt \_\_BRANCH\_TABLE\_\_} layout}
-@end tex
-@c END TEXI2ROFF-KILL
-
-The first word of the header is used to locate multiple branch tables,
-since each object file may contain one. Normally the links are
-maintained with a call to an initialization routine, placed at the
-beginning of each function in the file. The @sc{gnu} C compiler
-generates these calls automatically when you give it a @samp{-b} option.
-For further details, see the documentation of @samp{gbr960}.
-
-@item -no-relax
-@cindex @code{-no-relax} option, i960
-Normally, Compare-and-Branch instructions with targets that require
-displacements greater than 13 bits (or that have external targets) are
-replaced with the corresponding compare (or @samp{chkbit}) and branch
-instructions. You can use the @samp{-no-relax} option to specify that
-@code{@value{AS}} should generate errors instead, if the target displacement
-is larger than 13 bits.
-
-This option does not affect the Compare-and-Jump instructions; the code
-emitted for them is @emph{always} adjusted when necessary (depending on
-displacement size), regardless of whether you use @samp{-no-relax}.
-@end table
-
-@node Floating Point-i960
-@section Floating Point
-
-@cindex floating point, i960 (@sc{ieee})
-@cindex i960 floating point (@sc{ieee})
-@code{@value{AS}} generates @sc{ieee} floating-point numbers for the directives
-@samp{.float}, @samp{.double}, @samp{.extended}, and @samp{.single}.
-
-@node Directives-i960
-@section i960 Machine Directives
-
-@cindex machine directives, i960
-@cindex i960 machine directives
-
-@table @code
-@cindex @code{bss} directive, i960
-@item .bss @var{symbol}, @var{length}, @var{align}
-Reserve @var{length} bytes in the bss section for a local @var{symbol},
-aligned to the power of two specified by @var{align}. @var{length} and
-@var{align} must be positive absolute expressions. This directive
-differs from @samp{.lcomm} only in that it permits you to specify
-an alignment. @xref{Lcomm,,@code{.lcomm}}.
-@end table
-
-@table @code
-@item .extended @var{flonums}
-@cindex @code{extended} directive, i960
-@code{.extended} expects zero or more flonums, separated by commas; for
-each flonum, @samp{.extended} emits an @sc{ieee} extended-format (80-bit)
-floating-point number.
-
-@item .leafproc @var{call-lab}, @var{bal-lab}
-@cindex @code{leafproc} directive, i960
-You can use the @samp{.leafproc} directive in conjunction with the
-optimized @code{callj} instruction to enable faster calls of leaf
-procedures. If a procedure is known to call no other procedures, you
-may define an entry point that skips procedure prolog code (and that does
-not depend on system-supplied saved context), and declare it as the
-@var{bal-lab} using @samp{.leafproc}. If the procedure also has an
-entry point that goes through the normal prolog, you can specify that
-entry point as @var{call-lab}.
-
-A @samp{.leafproc} declaration is meant for use in conjunction with the
-optimized call instruction @samp{callj}; the directive records the data
-needed later to choose between converting the @samp{callj} into a
-@code{bal} or a @code{call}.
-
-@var{call-lab} is optional; if only one argument is present, or if the
-two arguments are identical, the single argument is assumed to be the
-@code{bal} entry point.
-
-@item .sysproc @var{name}, @var{index}
-@cindex @code{sysproc} directive, i960
-The @samp{.sysproc} directive defines a name for a system procedure.
-After you define it using @samp{.sysproc}, you can use @var{name} to
-refer to the system procedure identified by @var{index} when calling
-procedures with the optimized call instruction @samp{callj}.
-
-Both arguments are required; @var{index} must be between 0 and 31
-(inclusive).
-@end table
-
-@node Opcodes for i960
-@section i960 Opcodes
-
-@cindex opcodes, i960
-@cindex i960 opcodes
-All Intel 960 machine instructions are supported;
-@pxref{Options-i960,,i960 Command-line Options} for a discussion of
-selecting the instruction subset for a particular 960
-architecture.@refill
-
-Some opcodes are processed beyond simply emitting a single corresponding
-instruction: @samp{callj}, and Compare-and-Branch or Compare-and-Jump
-instructions with target displacements larger than 13 bits.
-
-@menu
-* callj-i960:: @code{callj}
-* Compare-and-branch-i960:: Compare-and-Branch
-@end menu
-
-@node callj-i960
-@subsection @code{callj}
-
-@cindex @code{callj}, i960 pseudo-opcode
-@cindex i960 @code{callj} pseudo-opcode
-You can write @code{callj} to have the assembler or the linker determine
-the most appropriate form of subroutine call: @samp{call},
-@samp{bal}, or @samp{calls}. If the assembly source contains
-enough information---a @samp{.leafproc} or @samp{.sysproc} directive
-defining the operand---then @code{@value{AS}} translates the
-@code{callj}; if not, it simply emits the @code{callj}, leaving it
-for the linker to resolve.
-
-@node Compare-and-branch-i960
-@subsection Compare-and-Branch
-
-@cindex i960 compare/branch instructions
-@cindex compare/branch instructions, i960
-The 960 architectures provide combined Compare-and-Branch instructions
-that permit you to store the branch target in the lower 13 bits of the
-instruction word itself. However, if you specify a branch target far
-enough away that its address won't fit in 13 bits, the assembler can
-either issue an error, or convert your Compare-and-Branch instruction
-into separate instructions to do the compare and the branch.
-
-@cindex compare and jump expansions, i960
-@cindex i960 compare and jump expansions
-Whether @code{@value{AS}} gives an error or expands the instruction depends
-on two choices you can make: whether you use the @samp{-no-relax} option,
-and whether you use a ``Compare and Branch'' instruction or a ``Compare
-and Jump'' instruction. The ``Jump'' instructions are @emph{always}
-expanded if necessary; the ``Branch'' instructions are expanded when
-necessary @emph{unless} you specify @code{-no-relax}---in which case
-@code{@value{AS}} gives an error instead.
-
-These are the Compare-and-Branch instructions, their ``Jump'' variants,
-and the instruction pairs they may expand into:
-
-@c TEXI2ROFF-KILL
-@ifinfo
-@c END TEXI2ROFF-KILL
-@example
- Compare and
- Branch Jump Expanded to
- ------ ------ ------------
- bbc chkbit; bno
- bbs chkbit; bo
- cmpibe cmpije cmpi; be
- cmpibg cmpijg cmpi; bg
- cmpibge cmpijge cmpi; bge
- cmpibl cmpijl cmpi; bl
- cmpible cmpijle cmpi; ble
- cmpibno cmpijno cmpi; bno
- cmpibne cmpijne cmpi; bne
- cmpibo cmpijo cmpi; bo
- cmpobe cmpoje cmpo; be
- cmpobg cmpojg cmpo; bg
- cmpobge cmpojge cmpo; bge
- cmpobl cmpojl cmpo; bl
- cmpoble cmpojle cmpo; ble
- cmpobne cmpojne cmpo; bne
-@end example
-@c TEXI2ROFF-KILL
-@end ifinfo
-@tex
-\hskip\tableindent
-\halign{\hfil {\tt #}\quad&\hfil {\tt #}\qquad&{\tt #}\hfil\cr
-\omit{\hfil\it Compare and\hfil}\span\omit&\cr
-{\it Branch}&{\it Jump}&{\it Expanded to}\cr
- bbc& & chkbit; bno\cr
- bbs& & chkbit; bo\cr
- cmpibe& cmpije& cmpi; be\cr
- cmpibg& cmpijg& cmpi; bg\cr
- cmpibge& cmpijge& cmpi; bge\cr
- cmpibl& cmpijl& cmpi; bl\cr
- cmpible& cmpijle& cmpi; ble\cr
- cmpibno& cmpijno& cmpi; bno\cr
- cmpibne& cmpijne& cmpi; bne\cr
- cmpibo& cmpijo& cmpi; bo\cr
- cmpobe& cmpoje& cmpo; be\cr
- cmpobg& cmpojg& cmpo; bg\cr
- cmpobge& cmpojge& cmpo; bge\cr
- cmpobl& cmpojl& cmpo; bl\cr
- cmpoble& cmpojle& cmpo; ble\cr
- cmpobne& cmpojne& cmpo; bne\cr}
-@end tex
-@c END TEXI2ROFF-KILL
-@end ifset
-
-@ifset M680X0
-@ifset GENERIC
-@page
-@node M68K-Dependent
-@chapter M680x0 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter M680x0 Dependent Features
-@end ifclear
-
-@cindex M680x0 support
-@menu
-* M68K-Opts:: M680x0 Options
-* M68K-Syntax:: Syntax
-* M68K-Moto-Syntax:: Motorola Syntax
-* M68K-Float:: Floating Point
-* M68K-Directives:: 680x0 Machine Directives
-* M68K-opcodes:: Opcodes
-@end menu
-
-@node M68K-Opts
-@section M680x0 Options
-
-@cindex options, M680x0
-@cindex M680x0 options
-The Motorola 680x0 version of @code{@value{AS}} has two machine dependent options.
-One shortens undefined references from 32 to 16 bits, while the
-other is used to tell @code{@value{AS}} what kind of machine it is
-assembling for.
-
-@cindex @code{-l} option, M680x0
-You can use the @samp{-l} option to shorten the size of references to undefined
-symbols. If you do not use the @samp{-l} option, references to undefined
-symbols are wide enough for a full @code{long} (32 bits). (Since
-@code{@value{AS}} cannot know where these symbols end up, @code{@value{AS}} can
-only allocate space for the linker to fill in later. Since @code{@value{AS}}
-does not know how far away these symbols are, it allocates as much space as it
-can.) If you use this option, the references are only one word wide (16 bits).
-This may be useful if you want the object file to be as small as possible, and
-you know that the relevant symbols are always less than 17 bits away.
-
-@cindex @code{-m68000} and related options
-@cindex architecture options, M680x0
-@cindex M680x0 architecture options
-The 680x0 version of @code{@value{AS}} is most frequently used to assemble
-programs for the Motorola MC68020 microprocessor. Occasionally it is
-used to assemble programs for the mostly similar, but slightly different
-MC68000 or MC68010 microprocessors. You can give @code{@value{AS}} the options
-@samp{-m68000}, @samp{-mc68000}, @samp{-m68010}, @samp{-mc68010},
-@samp{-m68020}, and @samp{-mc68020} to tell it what processor is the
-target.
-
-@node M68K-Syntax
-@section Syntax
-
-@cindex @sc{mit}
-This syntax for the Motorola 680x0 was developed at @sc{mit}.
-
-@cindex M680x0 syntax
-@cindex syntax, M680x0
-@cindex M680x0 size modifiers
-@cindex size modifiers, M680x0
-The 680x0 version of @code{@value{AS}} uses syntax compatible with the Sun
-assembler. Intervening periods are ignored; for example, @samp{movl} is
-equivalent to @samp{move.l}.
-
-@ifset INTERNALS
-If @code{@value{AS}} is compiled with SUN_ASM_SYNTAX defined, it
-also allows Sun-style local labels of the form @samp{1$} through
-@samp{$9}.
-@end ifset
-
-In the following table @dfn{apc} stands for any of the address
-registers (@samp{a0} through @samp{a7}), nothing, (@samp{}), the
-Program Counter (@samp{pc}), or the zero-address relative to the
-program counter (@samp{zpc}).
-
-@cindex M680x0 addressing modes
-@cindex addressing modes, M680x0
-The following addressing modes are understood:
-@table @dfn
-@item Immediate
-@samp{#@var{digits}}
-
-@item Data Register
-@samp{%d0} through @samp{%d7}
-
-@item Address Register
-@samp{%a0} through @samp{%a7}@*
-@samp{%a7} is also known as @samp{%sp}, i.e. the Stack Pointer. @code{%a6}
-is also known as @samp{%fp}, the Frame Pointer.
-
-@item Address Register Indirect
-@samp{%a0@@} through @samp{%a7@@}
-
-@item Address Register Postincrement
-@samp{%a0@@+} through @samp{%a7@@+}
-
-@item Address Register Predecrement
-@samp{%a0@@-} through @samp{%a7@@-}
-
-@item Indirect Plus Offset
-@samp{%@var{apc}@@(@var{digits})}
-
-@item Index
-@samp{%@var{apc}@@(@var{digits},%@var{register}:@var{size}:@var{scale})}
-
-or @samp{%@var{apc}@@(%@var{register}:@var{size}:@var{scale})}
-
-@item Postindex
-@samp{%@var{apc}@@(@var{digits})@@(@var{digits},%@var{register}:@var{size}:@var{scale})}
-
-or @samp{%@var{apc}@@(@var{digits})@@(%@var{register}:@var{size}:@var{scale})}
-
-@item Preindex
-@samp{%@var{apc}@@(@var{digits},%@var{register}:@var{size}:@var{scale})@@(@var{digits})}
-
-or @samp{%@var{apc}@@(%@var{register}:@var{size}:@var{scale})@@(@var{digits})}
-
-@item Memory Indirect
-@samp{%@var{apc}@@(@var{digits})@@(@var{digits})}
-
-@item Absolute
-@samp{@var{symbol}}, or @samp{@var{digits}}
-@ignore
-@c pesch@cygnus.com: gnu, rich concur the following needs careful
-@c research before documenting.
- , or either of the above followed
-by @samp{:b}, @samp{:w}, or @samp{:l}.
-@end ignore
-@end table
-
-For some configurations, especially those where the compiler normally does not
-prepend an underscore to the names of user variables, the assembler requires a
-@samp{%} before any use of a register name. This is intended to let the
-assembler distinguish between C variables and registers named @samp{a0} through
-@samp{a7}, and so on. The @samp{%} is always accepted, but is not required for
-certain configurations, notably @samp{sun3}.
-
-@node M68K-Moto-Syntax
-@section Motorola Syntax
-
-@cindex Motorola syntax for the 680x0
-@cindex alternate syntax for the 680x0
-
-The standard Motorola syntax for this chip differs from the syntax already
-discussed (@pxref{M68K-Syntax,,Syntax}). @code{@value{AS}} can accept some
-forms of Motorola syntax for operands, even if @sc{mit} syntax is used for
-other operands in the same instruction. The two kinds of syntax are fully
-compatible; our support for Motorola syntax is simply incomplete at present.
-
-@cindex M680x0 syntax
-@cindex syntax, M680x0
-In particular, you may write or generate M68K assembler with the
-following conventions:
-
-(In the following table @dfn{%apc} stands for any of the address registers
-(@samp{%a0} through @samp{%a7}), nothing (@samp{}), the Program Counter
-(@samp{%pc}), or the zero-address relative to the program counter
-(@samp{%zpc}).)
-
-@cindex M680x0 addressing modes
-@cindex addressing modes, M680x0
-The following additional addressing modes are understood:
-@table @dfn
-@item Address Register Indirect
-@samp{%a0} through @samp{%a7}@*
-@samp{%a7} is also known as @samp{%sp}, i.e. the Stack Pointer. @code{%a6}
-is also known as @samp{%fp}, the Frame Pointer.
-
-@item Address Register Postincrement
-@samp{(%a0)+} through @samp{(%a7)+}
-
-@item Address Register Predecrement
-@samp{-(%a0)} through @samp{-(%a7)}
-
-@item Indirect Plus Offset
-@samp{@var{digits}(%@var{apc})}
-
-@item Index
-@samp{@var{digits}(%@var{apc},(%@var{register}.@var{size}*@var{scale}))}@*
-or @samp{(%@var{apc},%@var{register}.@var{size}*@var{scale})}@*
-In either case, @var{size} and @var{scale} are optional
-(@var{scale} defaults to @samp{1}, @var{size} defaults to @samp{l}).
- @var{scale} can be @samp{1}, @samp{2}, @samp{4}, or @samp{8}.
- @var{size} can be @samp{w} or @samp{l}. @var{scale} is only supported
-on the 68020 and greater.
-@end table
-
-Other, more complex addressing modes permitted in Motorola syntax are not
-handled.
-
-@node M68K-Float
-@section Floating Point
-
-@cindex floating point, M680x0
-@cindex M680x0 floating point
-@c FIXME is this "not too well tested" crud STILL true?
-The floating point code is not too well tested, and may have
-subtle bugs in it.
-
-Packed decimal (P) format floating literals are not supported.
-Feel free to add the code!
-
-The floating point formats generated by directives are these.
-
-@table @code
-@item .float
-@cindex @code{float} directive, M680x0
-@code{Single} precision floating point constants.
-
-@item .double
-@cindex @code{double} directive, M680x0
-@code{Double} precision floating point constants.
-@end table
-
-There is no directive to produce regions of memory holding
-extended precision numbers, however they can be used as
-immediate operands to floating-point instructions. Adding a
-directive to create extended precision numbers would not be
-hard, but it has not yet seemed necessary.
-
-@node M68K-Directives
-@section 680x0 Machine Directives
-
-@cindex M680x0 directives
-@cindex directives, M680x0
-In order to be compatible with the Sun assembler the 680x0 assembler
-understands the following directives.
-
-@table @code
-@item .data1
-@cindex @code{data1} directive, M680x0
-This directive is identical to a @code{.data 1} directive.
-
-@item .data2
-@cindex @code{data2} directive, M680x0
-This directive is identical to a @code{.data 2} directive.
-
-@item .even
-@cindex @code{even} directive, M680x0
-This directive is identical to a @code{.align 1} directive.
-@c Is this true? does it work???
-
-@item .skip
-@cindex @code{skip} directive, M680x0
-This directive is identical to a @code{.space} directive.
-@end table
-
-@need 2000
-@node M68K-opcodes
-@section Opcodes
-
-@cindex M680x0 opcodes
-@cindex opcodes, M680x0
-@cindex instruction set, M680x0
-@c pesch@cygnus.com: I don't see any point in the following
-@c paragraph. Bugs are bugs; how does saying this
-@c help anyone?
-@ignore
-Danger: Several bugs have been found in the opcode table (and
-fixed). More bugs may exist. Be careful when using obscure
-instructions.
-@end ignore
+family.
@menu
-* M68K-Branch:: Branch Improvement
-* M68K-Chars:: Special Characters
+* H8/300-Dependent:: Hitachi H8/300 Dependent Features
+* H8/500-Dependent:: Hitachi H8/500 Dependent Features
+* SH-Dependent:: Hitachi SH Dependent Features
@end menu
+@lowersections
+@end ifclear
+@end ifset
-@node M68K-Branch
-@subsection Branch Improvement
-
-@cindex pseudo-opcodes, M680x0
-@cindex M680x0 pseudo-opcodes
-@cindex branch improvement, M680x0
-@cindex M680x0 branch improvement
-Certain pseudo opcodes are permitted for branch instructions.
-They expand to the shortest branch instruction that reach the
-target. Generally these mnemonics are made by substituting @samp{j} for
-@samp{b} at the start of a Motorola mnemonic.
-
-The following table summarizes the pseudo-operations. A @code{*} flags
-cases that are more fully described after the table:
-
-@smallexample
- Displacement
- +-------------------------------------------------
- | 68020 68000/10
-Pseudo-Op |BYTE WORD LONG LONG non-PC relative
- +-------------------------------------------------
- jbsr |bsrs bsr bsrl jsr jsr
- jra |bras bra bral jmp jmp
-* jXX |bXXs bXX bXXl bNXs;jmpl bNXs;jmp
-* dbXX |dbXX dbXX dbXX; bra; jmpl
-* fjXX |fbXXw fbXXw fbXXl fbNXw;jmp
-
-XX: condition
-NX: negative of condition XX
+@ifset D10V
+@include c-d10v.texi
+@end ifset
-@end smallexample
-@center @code{*}---see full description below
+@ifset D30V
+@include c-d30v.texi
+@end ifset
-@table @code
-@item jbsr
-@itemx jra
-These are the simplest jump pseudo-operations; they always map to one
-particular machine instruction, depending on the displacement to the
-branch target.
-
-@item j@var{XX}
-Here, @samp{j@var{XX}} stands for an entire family of pseudo-operations,
-where @var{XX} is a conditional branch or condition-code test. The full
-list of pseudo-ops in this family is:
-@smallexample
- jhi jls jcc jcs jne jeq jvc
- jvs jpl jmi jge jlt jgt jle
-@end smallexample
+@ifset H8/300
+@include c-h8300.texi
+@end ifset
-For the cases of non-PC relative displacements and long displacements on
-the 68000 or 68010, @code{@value{AS}} issues a longer code fragment in terms of
-@var{NX}, the opposite condition to @var{XX}. For example, for the
-non-PC relative case:
-@smallexample
- j@var{XX} foo
-@end smallexample
-gives
-@smallexample
- b@var{NX}s oof
- jmp foo
- oof:
-@end smallexample
+@ifset H8/500
+@include c-h8500.texi
+@end ifset
-@item db@var{XX}
-The full family of pseudo-operations covered here is
-@smallexample
- dbhi dbls dbcc dbcs dbne dbeq dbvc
- dbvs dbpl dbmi dbge dblt dbgt dble
- dbf dbra dbt
-@end smallexample
+@ifset HPPA
+@include c-hppa.texi
+@end ifset
-Other than for word and byte displacements, when the source reads
-@samp{db@var{XX} foo}, @code{@value{AS}} emits
-@smallexample
- db@var{XX} oo1
- bra oo2
- oo1:jmpl foo
- oo2:
-@end smallexample
+@ifset I370
+@include c-i370.texi
+@end ifset
-@item fj@var{XX}
-This family includes
-@smallexample
- fjne fjeq fjge fjlt fjgt fjle fjf
- fjt fjgl fjgle fjnge fjngl fjngle fjngt
- fjnle fjnlt fjoge fjogl fjogt fjole fjolt
- fjor fjseq fjsf fjsne fjst fjueq fjuge
- fjugt fjule fjult fjun
-@end smallexample
+@ifset I80386
+@include c-i386.texi
+@end ifset
-For branch targets that are not PC relative, @code{@value{AS}} emits
-@smallexample
- fb@var{NX} oof
- jmp foo
- oof:
-@end smallexample
-when it encounters @samp{fj@var{XX} foo}.
+@ifset I860
+@include c-i860.texi
+@end ifset
-@end table
+@ifset I960
+@include c-i960.texi
+@end ifset
-@node M68K-Chars
-@subsection Special Characters
+@ifset M32R
+@include c-m32r.texi
+@end ifset
-@cindex special characters, M680x0
-@cindex M680x0 immediate character
-@cindex immediate character, M680x0
-@cindex M680x0 line comment character
-@cindex line comment character, M680x0
-@cindex comments, M680x0
-The immediate character is @samp{#} for Sun compatibility. The
-line-comment character is @samp{|}. If a @samp{#} appears at the
-beginning of a line, it is treated as a comment unless it looks like
-@samp{# line file}, in which case it is treated normally.
+@ifset M680X0
+@include c-m68k.texi
+@end ifset
+@ifset M68HC11
+@include c-m68hc11.texi
@end ifset
-@ignore
-@c FIXME! Stop ignoring when filled in.
-@node 32x32
-@chapter 32x32
-
-@section Options
-The 32x32 version of @code{@value{AS}} accepts a @samp{-m32032} option to
-specify thiat it is compiling for a 32032 processor, or a
-@samp{-m32532} to specify that it is compiling for a 32532 option.
-The default (if neither is specified) is chosen when the assembler
-is compiled.
-
-@section Syntax
-I don't know anything about the 32x32 syntax assembled by
-@code{@value{AS}}. Someone who undersands the processor (I've never seen
-one) and the possible syntaxes should write this section.
-
-@section Floating Point
-The 32x32 uses @sc{ieee} floating point numbers, but @code{@value{AS}}
-only creates single or double precision values. I don't know if the
-32x32 understands extended precision numbers.
-
-@section 32x32 Machine Directives
-The 32x32 has no machine dependent directives.
-@end ignore
-@ifset SPARC
-@ifset GENERIC
-@page
-@node Sparc-Dependent
-@chapter SPARC Dependent Features
+@ifset MIPS
+@include c-mips.texi
@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter SPARC Dependent Features
-@end ifclear
-@cindex SPARC support
-@menu
-* Sparc-Opts:: Options
-* Sparc-Float:: Floating Point
-* Sparc-Directives:: Sparc Machine Directives
-@end menu
+@ifset NS32K
+@include c-ns32k.texi
+@end ifset
-@node Sparc-Opts
-@section Options
+@ifset PJ
+@include c-pj.texi
+@end ifset
-@cindex options for SPARC
-@cindex SPARC options
-@cindex architectures, SPARC
-@cindex SPARC architectures
-The SPARC chip family includes several successive levels (or other
-variants) of chip, using the same core instruction set, but including
-a few additional instructions at each level.
+@ifset SH
+@include c-sh.texi
+@end ifset
-By default, @code{@value{AS}} assumes the core instruction set (SPARC
-v6), but ``bumps'' the architecture level as needed: it switches to
-successively higher architectures as it encounters instructions that
-only exist in the higher levels.
+@ifset SPARC
+@include c-sparc.texi
+@end ifset
-@table @code
-@item -Av6 | -Av7 | -Av8 | -Av9 | -Asparclite
-@kindex -Av6
-@kindex Av7
-@kindex -Av8
-@kindex -Av9
-@kindex -Asparclite
-Use one of the @samp{-A} options to select one of the SPARC
-architectures explicitly. If you select an architecture explicitly,
-@code{@value{AS}} reports a fatal error if it encounters an instruction
-or feature requiring a higher level.
+@ifset TIC54X
+@include c-tic54x.texi
+@end ifset
-@item -bump
-Permit the assembler to ``bump'' the architecture level as required, but
-warn whenever it is necessary to switch to another level.
-@end table
+@ifset Z8000
+@include c-z8k.texi
+@end ifset
-@ignore
-@c FIXME: (sparc) Fill in "syntax" section!
-@c subsection syntax
-I don't know anything about Sparc syntax. Someone who does
-will have to write this section.
-@end ignore
+@ifset VAX
+@include c-vax.texi
+@end ifset
-@node Sparc-Float
-@section Floating Point
+@ifset V850
+@include c-v850.texi
+@end ifset
-@cindex floating point, SPARC (@sc{ieee})
-@cindex SPARC floating point (@sc{ieee})
-The Sparc uses @sc{ieee} floating-point numbers.
+@ifset GENERIC
+@c reverse effect of @down at top of generic Machine-Dep chapter
+@raisesections
+@end ifset
-@node Sparc-Directives
-@section Sparc Machine Directives
+@node Reporting Bugs
+@chapter Reporting Bugs
+@cindex bugs in assembler
+@cindex reporting bugs in assembler
-@cindex SPARC machine directives
-@cindex machine directives, SPARC
-The Sparc version of @code{@value{AS}} supports the following additional
-machine directives:
+Your bug reports play an essential role in making @code{@value{AS}} reliable.
-@table @code
-@item .align
-@cindex @code{align} directive, SPARC
-This must be followed by the desired alignment in bytes.
-
-@item .common
-@cindex @code{common} directive, SPARC
-This must be followed by a symbol name, a positive number, and
-@code{"bss"}. This behaves somewhat like @code{.comm}, but the
-syntax is different.
-
-@item .half
-@cindex @code{half} directive, SPARC
-This is functionally identical to @code{.short}.
-
-@item .proc
-@cindex @code{proc} directive, SPARC
-This directive is ignored. Any text following it on the same
-line is also ignored.
-
-@item .reserve
-@cindex @code{reserve} directive, SPARC
-This must be followed by a symbol name, a positive number, and
-@code{"bss"}. This behaves somewhat like @code{.lcomm}, but the
-syntax is different.
-
-@item .seg
-@cindex @code{seg} directive, SPARC
-This must be followed by @code{"text"}, @code{"data"}, or
-@code{"data1"}. It behaves like @code{.text}, @code{.data}, or
-@code{.data 1}.
-
-@item .skip
-@cindex @code{skip} directive, SPARC
-This is functionally identical to the @code{.space} directive.
-
-@item .word
-@cindex @code{word} directive, SPARC
-On the Sparc, the @code{.word} directive produces 32 bit values,
-instead of the 16 bit values it produces on many other machines.
-
-@item .xword
-@cindex @code{xword} directive, SPARC
-On the Sparc V9 processor, the @code{.xword} directive produces
-64 bit values.
-@end table
+Reporting a bug may help you by bringing a solution to your problem, or it may
+not. But in any case the principal function of a bug report is to help the
+entire community by making the next version of @code{@value{AS}} work better.
+Bug reports are your contribution to the maintenance of @code{@value{AS}}.
-@end ifset
-@ifset I80386
-@ifset GENERIC
-@page
-@node i386-Dependent
-@chapter 80386 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter 80386 Dependent Features
-@end ifclear
+In order for a bug report to serve its purpose, you must include the
+information that enables us to fix the bug.
-@cindex i386 support
-@cindex i80306 support
@menu
-* i386-Options:: Options
-* i386-Syntax:: AT&T Syntax versus Intel Syntax
-* i386-Opcodes:: Opcode Naming
-* i386-Regs:: Register Naming
-* i386-prefixes:: Opcode Prefixes
-* i386-Memory:: Memory References
-* i386-jumps:: Handling of Jump Instructions
-* i386-Float:: Floating Point
-* i386-16bit:: Writing 16-bit Code
-* i386-Notes:: Notes
+* Bug Criteria:: Have you found a bug?
+* Bug Reporting:: How to report bugs
@end menu
-@node i386-Options
-@section Options
-
-@cindex options for i386 (none)
-@cindex i386 options (none)
-The 80386 has no machine dependent options.
+@node Bug Criteria
+@section Have you found a bug?
+@cindex bug criteria
-@node i386-Syntax
-@section AT&T Syntax versus Intel Syntax
-
-@cindex i386 syntax compatibility
-@cindex syntax compatibility, i386
-In order to maintain compatibility with the output of @code{@value{GCC}},
-@code{@value{AS}} supports AT&T System V/386 assembler syntax. This is quite
-different from Intel syntax. We mention these differences because
-almost all 80386 documents used only Intel syntax. Notable differences
-between the two syntaxes are:
+If you are not sure whether you have found a bug, here are some guidelines:
@itemize @bullet
+@cindex fatal signal
+@cindex assembler crash
+@cindex crash of assembler
@item
-@cindex immediate operands, i386
-@cindex i386 immediate operands
-@cindex register operands, i386
-@cindex i386 register operands
-@cindex jump/call operands, i386
-@cindex i386 jump/call operands
-@cindex operand delimiters, i386
-AT&T immediate operands are preceded by @samp{$}; Intel immediate
-operands are undelimited (Intel @samp{push 4} is AT&T @samp{pushl $4}).
-AT&T register operands are preceded by @samp{%}; Intel register operands
-are undelimited. AT&T absolute (as opposed to PC relative) jump/call
-operands are prefixed by @samp{*}; they are undelimited in Intel syntax.
-
-@item
-@cindex i386 source, destination operands
-@cindex source, destination operands; i386
-AT&T and Intel syntax use the opposite order for source and destination
-operands. Intel @samp{add eax, 4} is @samp{addl $4, %eax}. The
-@samp{source, dest} convention is maintained for compatibility with
-previous Unix assemblers.
+If the assembler gets a fatal signal, for any input whatever, that is a
+@code{@value{AS}} bug. Reliable assemblers never crash.
+@cindex error on valid input
@item
-@cindex opcode suffixes, i386
-@cindex sizes operands, i386
-@cindex i386 size suffixes
-In AT&T syntax the size of memory operands is determined from the last
-character of the opcode name. Opcode suffixes of @samp{b}, @samp{w},
-and @samp{l} specify byte (8-bit), word (16-bit), and long (32-bit)
-memory references. Intel syntax accomplishes this by prefixes memory
-operands (@emph{not} the opcodes themselves) with @samp{byte ptr},
-@samp{word ptr}, and @samp{dword ptr}. Thus, Intel @samp{mov al, byte
-ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T syntax.
+If @code{@value{AS}} produces an error message for valid input, that is a bug.
+@cindex invalid input
@item
-@cindex return instructions, i386
-@cindex i386 jump, call, return
-Immediate form long jumps and calls are
-@samp{lcall/ljmp $@var{section}, $@var{offset}} in AT&T syntax; the
-Intel syntax is
-@samp{call/jmp far @var{section}:@var{offset}}. Also, the far return
-instruction
-is @samp{lret $@var{stack-adjust}} in AT&T syntax; Intel syntax is
-@samp{ret far @var{stack-adjust}}.
+If @code{@value{AS}} does not produce an error message for invalid input, that
+is a bug. However, you should note that your idea of ``invalid input'' might
+be our idea of ``an extension'' or ``support for traditional practice''.
@item
-@cindex sections, i386
-@cindex i386 sections
-The AT&T assembler does not provide support for multiple section
-programs. Unix style systems expect all programs to be single sections.
+If you are an experienced user of assemblers, your suggestions for improvement
+of @code{@value{AS}} are welcome in any case.
@end itemize
-@node i386-Opcodes
-@section Opcode Naming
-
-@cindex i386 opcode naming
-@cindex opcode naming, i386
-Opcode names are suffixed with one character modifiers which specify the
-size of operands. The letters @samp{b}, @samp{w}, and @samp{l} specify
-byte, word, and long operands. If no suffix is specified by an
-instruction and it contains no memory operands then @code{@value{AS}} tries to
-fill in the missing suffix based on the destination register operand
-(the last one by convention). Thus, @samp{mov %ax, %bx} is equivalent
-to @samp{movw %ax, %bx}; also, @samp{mov $1, %bx} is equivalent to
-@samp{movw $1, %bx}. Note that this is incompatible with the AT&T Unix
-assembler which assumes that a missing opcode suffix implies long
-operand size. (This incompatibility does not affect compiler output
-since compilers always explicitly specify the opcode suffix.)
-
-Almost all opcodes have the same names in AT&T and Intel format. There
-are a few exceptions. The sign extend and zero extend instructions need
-two sizes to specify them. They need a size to sign/zero extend
-@emph{from} and a size to zero extend @emph{to}. This is accomplished
-by using two opcode suffixes in AT&T syntax. Base names for sign extend
-and zero extend are @samp{movs@dots{}} and @samp{movz@dots{}} in AT&T
-syntax (@samp{movsx} and @samp{movzx} in Intel syntax). The opcode
-suffixes are tacked on to this base name, the @emph{from} suffix before
-the @emph{to} suffix. Thus, @samp{movsbl %al, %edx} is AT&T syntax for
-``move sign extend @emph{from} %al @emph{to} %edx.'' Possible suffixes,
-thus, are @samp{bl} (from byte to long), @samp{bw} (from byte to word),
-and @samp{wl} (from word to long).
-
-@cindex conversion instructions, i386
-@cindex i386 conversion instructions
-The Intel-syntax conversion instructions
+@node Bug Reporting
+@section How to report bugs
+@cindex bug reports
+@cindex assembler bugs, reporting
-@itemize @bullet
-@item
-@samp{cbw} --- sign-extend byte in @samp{%al} to word in @samp{%ax},
+A number of companies and individuals offer support for @sc{gnu} products. If
+you obtained @code{@value{AS}} from a support organization, we recommend you
+contact that organization first.
-@item
-@samp{cwde} --- sign-extend word in @samp{%ax} to long in @samp{%eax},
+You can find contact information for many support companies and
+individuals in the file @file{etc/SERVICE} in the @sc{gnu} Emacs
+distribution.
-@item
-@samp{cwd} --- sign-extend word in @samp{%ax} to long in @samp{%dx:%ax},
+In any event, we also recommend that you send bug reports for @code{@value{AS}}
+to @samp{bug-binutils@@gnu.org}.
-@item
-@samp{cdq} --- sign-extend dword in @samp{%eax} to quad in @samp{%edx:%eax},
-@end itemize
+The fundamental principle of reporting bugs usefully is this:
+@strong{report all the facts}. If you are not sure whether to state a
+fact or leave it out, state it!
-@noindent
-are called @samp{cbtw}, @samp{cwtl}, @samp{cwtd}, and @samp{cltd} in
-AT&T naming. @code{@value{AS}} accepts either naming for these instructions.
+Often people omit facts because they think they know what causes the problem
+and assume that some details do not matter. Thus, you might assume that the
+name of a symbol you use in an example does not matter. Well, probably it does
+not, but one cannot be sure. Perhaps the bug is a stray memory reference which
+happens to fetch from the location where that name is stored in memory;
+perhaps, if the name were different, the contents of that location would fool
+the assembler into doing the right thing despite the bug. Play it safe and
+give a specific, complete example. That is the easiest thing for you to do,
+and the most helpful.
-@cindex jump instructions, i386
-@cindex call instructions, i386
-Far call/jump instructions are @samp{lcall} and @samp{ljmp} in
-AT&T syntax, but are @samp{call far} and @samp{jump far} in Intel
-convention.
+Keep in mind that the purpose of a bug report is to enable us to fix the bug if
+it is new to us. Therefore, always write your bug reports on the assumption
+that the bug has not been reported previously.
-@node i386-Regs
-@section Register Naming
+Sometimes people give a few sketchy facts and ask, ``Does this ring a
+bell?'' Those bug reports are useless, and we urge everyone to
+@emph{refuse to respond to them} except to chide the sender to report
+bugs properly.
-@cindex i386 registers
-@cindex registers, i386
-Register operands are always prefixes with @samp{%}. The 80386 registers
-consist of
+To enable us to fix the bug, you should include all these things:
@itemize @bullet
@item
-the 8 32-bit registers @samp{%eax} (the accumulator), @samp{%ebx},
-@samp{%ecx}, @samp{%edx}, @samp{%edi}, @samp{%esi}, @samp{%ebp} (the
-frame pointer), and @samp{%esp} (the stack pointer).
-
-@item
-the 8 16-bit low-ends of these: @samp{%ax}, @samp{%bx}, @samp{%cx},
-@samp{%dx}, @samp{%di}, @samp{%si}, @samp{%bp}, and @samp{%sp}.
-
-@item
-the 8 8-bit registers: @samp{%ah}, @samp{%al}, @samp{%bh},
-@samp{%bl}, @samp{%ch}, @samp{%cl}, @samp{%dh}, and @samp{%dl} (These
-are the high-bytes and low-bytes of @samp{%ax}, @samp{%bx},
-@samp{%cx}, and @samp{%dx})
-
-@item
-the 6 section registers @samp{%cs} (code section), @samp{%ds}
-(data section), @samp{%ss} (stack section), @samp{%es}, @samp{%fs},
-and @samp{%gs}.
+The version of @code{@value{AS}}. @code{@value{AS}} announces it if you start
+it with the @samp{--version} argument.
-@item
-the 3 processor control registers @samp{%cr0}, @samp{%cr2}, and
-@samp{%cr3}.
+Without this, we will not know whether there is any point in looking for
+the bug in the current version of @code{@value{AS}}.
@item
-the 6 debug registers @samp{%db0}, @samp{%db1}, @samp{%db2},
-@samp{%db3}, @samp{%db6}, and @samp{%db7}.
+Any patches you may have applied to the @code{@value{AS}} source.
@item
-the 2 test registers @samp{%tr6} and @samp{%tr7}.
+The type of machine you are using, and the operating system name and
+version number.
@item
-the 8 floating point register stack @samp{%st} or equivalently
-@samp{%st(0)}, @samp{%st(1)}, @samp{%st(2)}, @samp{%st(3)},
-@samp{%st(4)}, @samp{%st(5)}, @samp{%st(6)}, and @samp{%st(7)}.
-@end itemize
-
-@node i386-prefixes
-@section Opcode Prefixes
-
-@cindex i386 opcode prefixes
-@cindex opcode prefixes, i386
-@cindex prefixes, i386
-Opcode prefixes are used to modify the following opcode. They are used
-to repeat string instructions, to provide section overrides, to perform
-bus lock operations, and to give operand and address size (16-bit
-operands are specified in an instruction by prefixing what would
-normally be 32-bit operands with a ``operand size'' opcode prefix).
-Opcode prefixes are usually given as single-line instructions with no
-operands, and must directly precede the instruction they act upon. For
-example, the @samp{scas} (scan string) instruction is repeated with:
-@smallexample
- repne
- scas
-@end smallexample
-
-Here is a list of opcode prefixes:
+What compiler (and its version) was used to compile @code{@value{AS}}---e.g.
+``@code{gcc-2.7}''.
-@itemize @bullet
@item
-@cindex section override prefixes, i386
-Section override prefixes @samp{cs}, @samp{ds}, @samp{ss}, @samp{es},
-@samp{fs}, @samp{gs}. These are automatically added by specifying
-using the @var{section}:@var{memory-operand} form for memory references.
+The command arguments you gave the assembler to assemble your example and
+observe the bug. To guarantee you will not omit something important, list them
+all. A copy of the Makefile (or the output from make) is sufficient.
-@item
-@cindex size prefixes, i386
-Operand/Address size prefixes @samp{data16} and @samp{addr16}
-change 32-bit operands/addresses into 16-bit operands/addresses. Note
-that 16-bit addressing modes (i.e. 8086 and 80286 addressing modes)
-are not supported (yet).
+If we were to try to guess the arguments, we would probably guess wrong
+and then we might not encounter the bug.
@item
-@cindex bus lock prefixes, i386
-@cindex inhibiting interrupts, i386
-The bus lock prefix @samp{lock} inhibits interrupts during
-execution of the instruction it precedes. (This is only valid with
-certain instructions; see a 80386 manual for details).
+A complete input file that will reproduce the bug. If the bug is observed when
+the assembler is invoked via a compiler, send the assembler source, not the
+high level language source. Most compilers will produce the assembler source
+when run with the @samp{-S} option. If you are using @code{@value{GCC}}, use
+the options @samp{-v --save-temps}; this will save the assembler source in a
+file with an extension of @file{.s}, and also show you exactly how
+@code{@value{AS}} is being run.
@item
-@cindex coprocessor wait, i386
-The wait for coprocessor prefix @samp{wait} waits for the
-coprocessor to complete the current instruction. This should never be
-needed for the 80386/80387 combination.
+A description of what behavior you observe that you believe is
+incorrect. For example, ``It gets a fatal signal.''
+
+Of course, if the bug is that @code{@value{AS}} gets a fatal signal, then we
+will certainly notice it. But if the bug is incorrect output, we might not
+notice unless it is glaringly wrong. You might as well not give us a chance to
+make a mistake.
+
+Even if the problem you experience is a fatal signal, you should still say so
+explicitly. Suppose something strange is going on, such as, your copy of
+@code{@value{AS}} is out of synch, or you have encountered a bug in the C
+library on your system. (This has happened!) Your copy might crash and ours
+would not. If you told us to expect a crash, then when ours fails to crash, we
+would know that the bug was not happening for us. If you had not told us to
+expect a crash, then we would not be able to draw any conclusion from our
+observations.
@item
-@cindex repeat prefixes, i386
-The @samp{rep}, @samp{repe}, and @samp{repne} prefixes are added
-to string instructions to make them repeat @samp{%ecx} times.
+If you wish to suggest changes to the @code{@value{AS}} source, send us context
+diffs, as generated by @code{diff} with the @samp{-u}, @samp{-c}, or @samp{-p}
+option. Always send diffs from the old file to the new file. If you even
+discuss something in the @code{@value{AS}} source, refer to it by context, not
+by line number.
+
+The line numbers in our development sources will not match those in your
+sources. Your line numbers would convey no useful information to us.
@end itemize
-@node i386-Memory
-@section Memory References
-
-@cindex i386 memory references
-@cindex memory references, i386
-An Intel syntax indirect memory reference of the form
-
-@smallexample
-@var{section}:[@var{base} + @var{index}*@var{scale} + @var{disp}]
-@end smallexample
-
-@noindent
-is translated into the AT&T syntax
-
-@smallexample
-@var{section}:@var{disp}(@var{base}, @var{index}, @var{scale})
-@end smallexample
-
-@noindent
-where @var{base} and @var{index} are the optional 32-bit base and
-index registers, @var{disp} is the optional displacement, and
-@var{scale}, taking the values 1, 2, 4, and 8, multiplies @var{index}
-to calculate the address of the operand. If no @var{scale} is
-specified, @var{scale} is taken to be 1. @var{section} specifies the
-optional section register for the memory operand, and may override the
-default section register (see a 80386 manual for section register
-defaults). Note that section overrides in AT&T syntax @emph{must} have
-be preceded by a @samp{%}. If you specify a section override which
-coincides with the default section register, @code{@value{AS}} does @emph{not}
-output any section register override prefixes to assemble the given
-instruction. Thus, section overrides can be specified to emphasize which
-section register is used for a given memory operand.
-
-Here are some examples of Intel and AT&T style memory references:
-
-@table @asis
-@item AT&T: @samp{-4(%ebp)}, Intel: @samp{[ebp - 4]}
-@var{base} is @samp{%ebp}; @var{disp} is @samp{-4}. @var{section} is
-missing, and the default section is used (@samp{%ss} for addressing with
-@samp{%ebp} as the base register). @var{index}, @var{scale} are both missing.
-
-@item AT&T: @samp{foo(,%eax,4)}, Intel: @samp{[foo + eax*4]}
-@var{index} is @samp{%eax} (scaled by a @var{scale} 4); @var{disp} is
-@samp{foo}. All other fields are missing. The section register here
-defaults to @samp{%ds}.
-
-@item AT&T: @samp{foo(,1)}; Intel @samp{[foo]}
-This uses the value pointed to by @samp{foo} as a memory operand.
-Note that @var{base} and @var{index} are both missing, but there is only
-@emph{one} @samp{,}. This is a syntactic exception.
-
-@item AT&T: @samp{%gs:foo}; Intel @samp{gs:foo}
-This selects the contents of the variable @samp{foo} with section
-register @var{section} being @samp{%gs}.
-@end table
-
-Absolute (as opposed to PC relative) call and jump operands must be
-prefixed with @samp{*}. If no @samp{*} is specified, @code{@value{AS}}
-always chooses PC relative addressing for jump/call labels.
-
-Any instruction that has a memory operand @emph{must} specify its size (byte,
-word, or long) with an opcode suffix (@samp{b}, @samp{w}, or @samp{l},
-respectively).
-
-@node i386-jumps
-@section Handling of Jump Instructions
-
-@cindex jump optimization, i386
-@cindex i386 jump optimization
-Jump instructions are always optimized to use the smallest possible
-displacements. This is accomplished by using byte (8-bit) displacement
-jumps whenever the target is sufficiently close. If a byte displacement
-is insufficient a long (32-bit) displacement is used. We do not support
-word (16-bit) displacement jumps (i.e. prefixing the jump instruction
-with the @samp{addr16} opcode prefix), since the 80386 insists upon masking
-@samp{%eip} to 16 bits after the word displacement is added.
-
-Note that the @samp{jcxz}, @samp{jecxz}, @samp{loop}, @samp{loopz},
-@samp{loope}, @samp{loopnz} and @samp{loopne} instructions only come in byte
-displacements, so that if you use these instructions (@code{@value{GCC}} does
-not use them) you may get an error message (and incorrect code). The AT&T
-80386 assembler tries to get around this problem by expanding @samp{jcxz foo}
-to
-
-@smallexample
- jcxz cx_zero
- jmp cx_nonzero
-cx_zero: jmp foo
-cx_nonzero:
-@end smallexample
-
-@node i386-Float
-@section Floating Point
-
-@cindex i386 floating point
-@cindex floating point, i386
-All 80387 floating point types except packed BCD are supported.
-(BCD support may be added without much difficulty). These data
-types are 16-, 32-, and 64- bit integers, and single (32-bit),
-double (64-bit), and extended (80-bit) precision floating point.
-Each supported type has an opcode suffix and a constructor
-associated with it. Opcode suffixes specify operand's data
-types. Constructors build these data types into memory.
+Here are some things that are not necessary:
@itemize @bullet
@item
-@cindex @code{float} directive, i386
-@cindex @code{single} directive, i386
-@cindex @code{double} directive, i386
-@cindex @code{tfloat} directive, i386
-Floating point constructors are @samp{.float} or @samp{.single},
-@samp{.double}, and @samp{.tfloat} for 32-, 64-, and 80-bit formats.
-These correspond to opcode suffixes @samp{s}, @samp{l}, and @samp{t}.
-@samp{t} stands for temporary real, and that the 80387 only supports
-this format via the @samp{fldt} (load temporary real to stack top) and
-@samp{fstpt} (store temporary real and pop stack) instructions.
-
-@item
-@cindex @code{word} directive, i386
-@cindex @code{long} directive, i386
-@cindex @code{int} directive, i386
-@cindex @code{quad} directive, i386
-Integer constructors are @samp{.word}, @samp{.long} or @samp{.int}, and
-@samp{.quad} for the 16-, 32-, and 64-bit integer formats. The corresponding
-opcode suffixes are @samp{s} (single), @samp{l} (long), and @samp{q}
-(quad). As with the temporary real format the 64-bit @samp{q} format is
-only present in the @samp{fildq} (load quad integer to stack top) and
-@samp{fistpq} (store quad integer and pop stack) instructions.
-@end itemize
-
-Register to register operations do not require opcode suffixes,
-so that @samp{fst %st, %st(1)} is equivalent to @samp{fstl %st, %st(1)}.
-
-@cindex i386 @code{fwait} instruction
-@cindex @code{fwait instruction}, i386
-Since the 80387 automatically synchronizes with the 80386 @samp{fwait}
-instructions are almost never needed (this is not the case for the
-80286/80287 and 8086/8087 combinations). Therefore, @code{@value{AS}} suppresses
-the @samp{fwait} instruction whenever it is implicitly selected by one
-of the @samp{fn@dots{}} instructions. For example, @samp{fsave} and
-@samp{fnsave} are treated identically. In general, all the @samp{fn@dots{}}
-instructions are made equivalent to @samp{f@dots{}} instructions. If
-@samp{fwait} is desired it must be explicitly coded.
-
-@node i386-16bit
-@section Writing 16-bit Code
-
-@cindex i386 16-bit code
-@cindex 16-bit code, i386
-@cindex real-mode code, i386
-@cindex @code{code16} directive, i386
-@cindex @code{code32} directive, i386
-While GAS normally writes only ``pure'' 32-bit i386 code, it has limited
-support for writing code to run in real mode or in 16-bit protected mode
-code segments. To do this, insert a @samp{.code16} directive before the
-assembly language instructions to be run in 16-bit mode. You can switch
-GAS back to writing normal 32-bit code with the @samp{.code32} directive.
-
-GAS understands exactly the same assembly language syntax in 16-bit mode as
-in 32-bit mode. The function of any given instruction is exactly the same
-regardless of mode, as long as the resulting object code is executed in the
-mode for which GAS wrote it. So, for example, the @samp{ret} mnemonic
-produces a 32-bit return instruction regardless of whether it is to be run
-in 16-bit or 32-bit mode. (If GAS is in 16-bit mode, it will add an
-operand size prefix to the instruction to force it to be a 32-bit return.)
-
-This means, for one thing, that you can use GNU CC to write code to be run
-in real mode or 16-bit protected mode. Just insert the statement
-@samp{asm(".code16");} at the beginning of your C source file, and while
-GNU CC will still be generating 32-bit code, GAS will automatically add all
-the necessary size prefixes to make that code run in 16-bit mode. Of
-course, since GNU CC only writes small-model code (it doesn't know how to
-attach segment selectors to pointers like native x86 compilers do), any
-16-bit code you write with GNU CC will essentially be limited to a 64K
-address space. Also, there will be a code size and performance penalty
-due to all the extra address and operand size prefixes GAS has to add to
-the instructions.
-
-Note that placing GAS in 16-bit mode does not mean that the resulting
-code will necessarily run on a 16-bit pre-80386 processor. To write code
-that runs on such a processor, you would have to refrain from using
-@emph{any} 32-bit constructs which require GAS to output address or
-operand size prefixes. At the moment this would be rather difficult,
-because GAS currently supports @emph{only} 32-bit addressing modes: when
-writing 16-bit code, it @emph{always} outputs address size prefixes for any
-instruction that uses a non-register addressing mode. So you can write
-code that runs on 16-bit processors, but only if that code never references
-memory.
-
-@node i386-Notes
-@section Notes
-
-@cindex i386 @code{mul}, @code{imul} instructions
-@cindex @code{mul} instruction, i386
-@cindex @code{imul} instruction, i386
-There is some trickery concerning the @samp{mul} and @samp{imul}
-instructions that deserves mention. The 16-, 32-, and 64-bit expanding
-multiplies (base opcode @samp{0xf6}; extension 4 for @samp{mul} and 5
-for @samp{imul}) can be output only in the one operand form. Thus,
-@samp{imul %ebx, %eax} does @emph{not} select the expanding multiply;
-the expanding multiply would clobber the @samp{%edx} register, and this
-would confuse @code{@value{GCC}} output. Use @samp{imul %ebx} to get the
-64-bit product in @samp{%edx:%eax}.
-
-We have added a two operand form of @samp{imul} when the first operand
-is an immediate mode expression and the second operand is a register.
-This is just a shorthand, so that, multiplying @samp{%eax} by 69, for
-example, can be done with @samp{imul $69, %eax} rather than @samp{imul
-$69, %eax, %eax}.
-
-@end ifset
-@ifset Z8000
-@ifset GENERIC
-@page
-@node Z8000-Dependent
-@chapter Z8000 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter Z8000 Dependent Features
-@end ifclear
-
-@cindex Z8000 support
-The Z8000 @value{AS} supports both members of the Z8000 family: the
-unsegmented Z8002, with 16 bit addresses, and the segmented Z8001 with
-24 bit addresses.
-
-When the assembler is in unsegmented mode (specified with the
-@code{unsegm} directive), an address takes up one word (16 bit)
-sized register. When the assembler is in segmented mode (specified with
-the @code{segm} directive), a 24-bit address takes up a long (32 bit)
-register. @xref{Z8000 Directives,,Assembler Directives for the Z8000},
-for a list of other Z8000 specific assembler directives.
-
-@menu
-* Z8000 Options:: No special command-line options for Z8000
-* Z8000 Syntax:: Assembler syntax for the Z8000
-* Z8000 Directives:: Special directives for the Z8000
-* Z8000 Opcodes:: Opcodes
-@end menu
-
-@node Z8000 Options
-@section Options
-
-@cindex Z8000 options
-@cindex options, Z8000
-@code{@value{AS}} has no additional command-line options for the Zilog
-Z8000 family.
-
-@node Z8000 Syntax
-@section Syntax
-@menu
-* Z8000-Chars:: Special Characters
-* Z8000-Regs:: Register Names
-* Z8000-Addressing:: Addressing Modes
-@end menu
-
-@node Z8000-Chars
-@subsection Special Characters
-
-@cindex line comment character, Z8000
-@cindex Z8000 line comment character
-@samp{!} is the line comment character.
-
-@cindex line separator, Z8000
-@cindex statement separator, Z8000
-@cindex Z8000 line separator
-You can use @samp{;} instead of a newline to separate statements.
-
-@node Z8000-Regs
-@subsection Register Names
-
-@cindex Z8000 registers
-@cindex registers, Z8000
-The Z8000 has sixteen 16 bit registers, numbered 0 to 15. You can refer
-to different sized groups of registers by register number, with the
-prefix @samp{r} for 16 bit registers, @samp{rr} for 32 bit registers and
-@samp{rq} for 64 bit registers. You can also refer to the contents of
-the first eight (of the sixteen 16 bit registers) by bytes. They are
-named @samp{r@var{n}h} and @samp{r@var{n}l}.
-
-@smallexample
-@exdent @emph{byte registers}
-r0l r0h r1h r1l r2h r2l r3h r3l
-r4h r4l r5h r5l r6h r6l r7h r7l
-
-@exdent @emph{word registers}
-r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15
-
-@exdent @emph{long word registers}
-rr0 rr2 rr4 rr6 rr8 rr10 rr12 rr14
-
-@exdent @emph{quad word registers}
-rq0 rq4 rq8 rq12
-@end smallexample
-
-@node Z8000-Addressing
-@subsection Addressing Modes
-
-@cindex addressing modes, Z8000
-@cindex Z800 addressing modes
-@value{AS} understands the following addressing modes for the Z8000:
-
-@table @code
-@item r@var{n}
-Register direct
-
-@item @@r@var{n}
-Indirect register
-
-@item @var{addr}
-Direct: the 16 bit or 24 bit address (depending on whether the assembler
-is in segmented or unsegmented mode) of the operand is in the instruction.
-
-@item address(r@var{n})
-Indexed: the 16 or 24 bit address is added to the 16 bit register to produce
-the final address in memory of the operand.
-
-@item r@var{n}(#@var{imm})
-Base Address: the 16 or 24 bit register is added to the 16 bit sign
-extended immediate displacement to produce the final address in memory
-of the operand.
-
-@item r@var{n}(r@var{m})
-Base Index: the 16 or 24 bit register r@var{n} is added to the sign
-extended 16 bit index register r@var{m} to produce the final address in
-memory of the operand.
-
-@item #@var{xx}
-Immediate data @var{xx}.
-@end table
-
-@node Z8000 Directives
-@section Assembler Directives for the Z8000
-
-@cindex Z8000 directives
-@cindex directives, Z8000
-The Z8000 port of @value{AS} includes these additional assembler directives,
-for compatibility with other Z8000 assemblers. As shown, these do not
-begin with @samp{.} (unlike the ordinary @value{AS} directives).
-
-@table @code
-@item segm
-@kindex segm
-Generates code for the segmented Z8001.
-
-@item unsegm
-@kindex unsegm
-Generates code for the unsegmented Z8002.
-
-@item name
-@kindex name
-Synonym for @code{.file}
-
-@item global
-@kindex global
-Synonum for @code{.global}
-
-@item wval
-@kindex wval
-Synonym for @code{.word}
-
-@item lval
-@kindex lval
-Synonym for @code{.long}
-
-@item bval
-@kindex bval
-Synonym for @code{.byte}
-
-@item sval
-@kindex sval
-Assemble a string. @code{sval} expects one string literal, delimited by
-single quotes. It assembles each byte of the string into consecutive
-addresses. You can use the escape sequence @samp{%@var{xx}} (where
-@var{xx} represents a two-digit hexadecimal number) to represent the
-character whose @sc{ascii} value is @var{xx}. Use this feature to
-describe single quote and other characters that may not appear in string
-literals as themselves. For example, the C statement @w{@samp{char *a =
-"he said \"it's 50% off\"";}} is represented in Z8000 assembly language
-(shown with the assembler output in hex at the left) as
-
-@iftex
-@begingroup
-@let@nonarrowing=@comment
-@end iftex
-@smallexample
-68652073 sval 'he said %22it%27s 50%25 off%22%00'
-61696420
-22697427
-73203530
-25206F66
-662200
-@end smallexample
-@iftex
-@endgroup
-@end iftex
-
-@item rsect
-@kindex rsect
-synonym for @code{.section}
-
-@item block
-@kindex block
-synonym for @code{.space}
-
-@item even
-@kindex even
-synonym for @code{.align 1}
-@end table
-
-@node Z8000 Opcodes
-@section Opcodes
-
-@cindex Z8000 opcode summary
-@cindex opcode summary, Z8000
-@cindex mnemonics, Z8000
-@cindex instruction summary, Z8000
-For detailed information on the Z8000 machine instruction set, see
-@cite{Z8000 Technical Manual}.
+A description of the envelope of the bug.
-@ifset SMALL
-@c this table, due to the multi-col faking and hardcoded order, looks silly
-@c except in smallbook. See comments below "@set SMALL" near top of this file.
+Often people who encounter a bug spend a lot of time investigating
+which changes to the input file will make the bug go away and which
+changes will not affect it.
-The following table summarizes the opcodes and their arguments:
-@iftex
-@begingroup
-@let@nonarrowing=@comment
-@end iftex
-@smallexample
-
- rs @r{16 bit source register}
- rd @r{16 bit destination register}
- rbs @r{8 bit source register}
- rbd @r{8 bit destination register}
- rrs @r{32 bit source register}
- rrd @r{32 bit destination register}
- rqs @r{64 bit source register}
- rqd @r{64 bit destination register}
- addr @r{16/24 bit address}
- imm @r{immediate data}
-
-adc rd,rs clrb addr cpsir @@rd,@@rs,rr,cc
-adcb rbd,rbs clrb addr(rd) cpsirb @@rd,@@rs,rr,cc
-add rd,@@rs clrb rbd dab rbd
-add rd,addr com @@rd dbjnz rbd,disp7
-add rd,addr(rs) com addr dec @@rd,imm4m1
-add rd,imm16 com addr(rd) dec addr(rd),imm4m1
-add rd,rs com rd dec addr,imm4m1
-addb rbd,@@rs comb @@rd dec rd,imm4m1
-addb rbd,addr comb addr decb @@rd,imm4m1
-addb rbd,addr(rs) comb addr(rd) decb addr(rd),imm4m1
-addb rbd,imm8 comb rbd decb addr,imm4m1
-addb rbd,rbs comflg flags decb rbd,imm4m1
-addl rrd,@@rs cp @@rd,imm16 di i2
-addl rrd,addr cp addr(rd),imm16 div rrd,@@rs
-addl rrd,addr(rs) cp addr,imm16 div rrd,addr
-addl rrd,imm32 cp rd,@@rs div rrd,addr(rs)
-addl rrd,rrs cp rd,addr div rrd,imm16
-and rd,@@rs cp rd,addr(rs) div rrd,rs
-and rd,addr cp rd,imm16 divl rqd,@@rs
-and rd,addr(rs) cp rd,rs divl rqd,addr
-and rd,imm16 cpb @@rd,imm8 divl rqd,addr(rs)
-and rd,rs cpb addr(rd),imm8 divl rqd,imm32
-andb rbd,@@rs cpb addr,imm8 divl rqd,rrs
-andb rbd,addr cpb rbd,@@rs djnz rd,disp7
-andb rbd,addr(rs) cpb rbd,addr ei i2
-andb rbd,imm8 cpb rbd,addr(rs) ex rd,@@rs
-andb rbd,rbs cpb rbd,imm8 ex rd,addr
-bit @@rd,imm4 cpb rbd,rbs ex rd,addr(rs)
-bit addr(rd),imm4 cpd rd,@@rs,rr,cc ex rd,rs
-bit addr,imm4 cpdb rbd,@@rs,rr,cc exb rbd,@@rs
-bit rd,imm4 cpdr rd,@@rs,rr,cc exb rbd,addr
-bit rd,rs cpdrb rbd,@@rs,rr,cc exb rbd,addr(rs)
-bitb @@rd,imm4 cpi rd,@@rs,rr,cc exb rbd,rbs
-bitb addr(rd),imm4 cpib rbd,@@rs,rr,cc ext0e imm8
-bitb addr,imm4 cpir rd,@@rs,rr,cc ext0f imm8
-bitb rbd,imm4 cpirb rbd,@@rs,rr,cc ext8e imm8
-bitb rbd,rs cpl rrd,@@rs ext8f imm8
-bpt cpl rrd,addr exts rrd
-call @@rd cpl rrd,addr(rs) extsb rd
-call addr cpl rrd,imm32 extsl rqd
-call addr(rd) cpl rrd,rrs halt
-calr disp12 cpsd @@rd,@@rs,rr,cc in rd,@@rs
-clr @@rd cpsdb @@rd,@@rs,rr,cc in rd,imm16
-clr addr cpsdr @@rd,@@rs,rr,cc inb rbd,@@rs
-clr addr(rd) cpsdrb @@rd,@@rs,rr,cc inb rbd,imm16
-clr rd cpsi @@rd,@@rs,rr,cc inc @@rd,imm4m1
-clrb @@rd cpsib @@rd,@@rs,rr,cc inc addr(rd),imm4m1
-inc addr,imm4m1 ldb rbd,rs(rx) mult rrd,addr(rs)
-inc rd,imm4m1 ldb rd(imm16),rbs mult rrd,imm16
-incb @@rd,imm4m1 ldb rd(rx),rbs mult rrd,rs
-incb addr(rd),imm4m1 ldctl ctrl,rs multl rqd,@@rs
-incb addr,imm4m1 ldctl rd,ctrl multl rqd,addr
-incb rbd,imm4m1 ldd @@rs,@@rd,rr multl rqd,addr(rs)
-ind @@rd,@@rs,ra lddb @@rs,@@rd,rr multl rqd,imm32
-indb @@rd,@@rs,rba lddr @@rs,@@rd,rr multl rqd,rrs
-inib @@rd,@@rs,ra lddrb @@rs,@@rd,rr neg @@rd
-inibr @@rd,@@rs,ra ldi @@rd,@@rs,rr neg addr
-iret ldib @@rd,@@rs,rr neg addr(rd)
-jp cc,@@rd ldir @@rd,@@rs,rr neg rd
-jp cc,addr ldirb @@rd,@@rs,rr negb @@rd
-jp cc,addr(rd) ldk rd,imm4 negb addr
-jr cc,disp8 ldl @@rd,rrs negb addr(rd)
-ld @@rd,imm16 ldl addr(rd),rrs negb rbd
-ld @@rd,rs ldl addr,rrs nop
-ld addr(rd),imm16 ldl rd(imm16),rrs or rd,@@rs
-ld addr(rd),rs ldl rd(rx),rrs or rd,addr
-ld addr,imm16 ldl rrd,@@rs or rd,addr(rs)
-ld addr,rs ldl rrd,addr or rd,imm16
-ld rd(imm16),rs ldl rrd,addr(rs) or rd,rs
-ld rd(rx),rs ldl rrd,imm32 orb rbd,@@rs
-ld rd,@@rs ldl rrd,rrs orb rbd,addr
-ld rd,addr ldl rrd,rs(imm16) orb rbd,addr(rs)
-ld rd,addr(rs) ldl rrd,rs(rx) orb rbd,imm8
-ld rd,imm16 ldm @@rd,rs,n orb rbd,rbs
-ld rd,rs ldm addr(rd),rs,n out @@rd,rs
-ld rd,rs(imm16) ldm addr,rs,n out imm16,rs
-ld rd,rs(rx) ldm rd,@@rs,n outb @@rd,rbs
-lda rd,addr ldm rd,addr(rs),n outb imm16,rbs
-lda rd,addr(rs) ldm rd,addr,n outd @@rd,@@rs,ra
-lda rd,rs(imm16) ldps @@rs outdb @@rd,@@rs,rba
-lda rd,rs(rx) ldps addr outib @@rd,@@rs,ra
-ldar rd,disp16 ldps addr(rs) outibr @@rd,@@rs,ra
-ldb @@rd,imm8 ldr disp16,rs pop @@rd,@@rs
-ldb @@rd,rbs ldr rd,disp16 pop addr(rd),@@rs
-ldb addr(rd),imm8 ldrb disp16,rbs pop addr,@@rs
-ldb addr(rd),rbs ldrb rbd,disp16 pop rd,@@rs
-ldb addr,imm8 ldrl disp16,rrs popl @@rd,@@rs
-ldb addr,rbs ldrl rrd,disp16 popl addr(rd),@@rs
-ldb rbd,@@rs mbit popl addr,@@rs
-ldb rbd,addr mreq rd popl rrd,@@rs
-ldb rbd,addr(rs) mres push @@rd,@@rs
-ldb rbd,imm8 mset push @@rd,addr
-ldb rbd,rbs mult rrd,@@rs push @@rd,addr(rs)
-ldb rbd,rs(imm16) mult rrd,addr push @@rd,imm16
-push @@rd,rs set addr,imm4 subl rrd,imm32
-pushl @@rd,@@rs set rd,imm4 subl rrd,rrs
-pushl @@rd,addr set rd,rs tcc cc,rd
-pushl @@rd,addr(rs) setb @@rd,imm4 tccb cc,rbd
-pushl @@rd,rrs setb addr(rd),imm4 test @@rd
-res @@rd,imm4 setb addr,imm4 test addr
-res addr(rd),imm4 setb rbd,imm4 test addr(rd)
-res addr,imm4 setb rbd,rs test rd
-res rd,imm4 setflg imm4 testb @@rd
-res rd,rs sinb rbd,imm16 testb addr
-resb @@rd,imm4 sinb rd,imm16 testb addr(rd)
-resb addr(rd),imm4 sind @@rd,@@rs,ra testb rbd
-resb addr,imm4 sindb @@rd,@@rs,rba testl @@rd
-resb rbd,imm4 sinib @@rd,@@rs,ra testl addr
-resb rbd,rs sinibr @@rd,@@rs,ra testl addr(rd)
-resflg imm4 sla rd,imm8 testl rrd
-ret cc slab rbd,imm8 trdb @@rd,@@rs,rba
-rl rd,imm1or2 slal rrd,imm8 trdrb @@rd,@@rs,rba
-rlb rbd,imm1or2 sll rd,imm8 trib @@rd,@@rs,rbr
-rlc rd,imm1or2 sllb rbd,imm8 trirb @@rd,@@rs,rbr
-rlcb rbd,imm1or2 slll rrd,imm8 trtdrb @@ra,@@rb,rbr
-rldb rbb,rba sout imm16,rs trtib @@ra,@@rb,rr
-rr rd,imm1or2 soutb imm16,rbs trtirb @@ra,@@rb,rbr
-rrb rbd,imm1or2 soutd @@rd,@@rs,ra trtrb @@ra,@@rb,rbr
-rrc rd,imm1or2 soutdb @@rd,@@rs,rba tset @@rd
-rrcb rbd,imm1or2 soutib @@rd,@@rs,ra tset addr
-rrdb rbb,rba soutibr @@rd,@@rs,ra tset addr(rd)
-rsvd36 sra rd,imm8 tset rd
-rsvd38 srab rbd,imm8 tsetb @@rd
-rsvd78 sral rrd,imm8 tsetb addr
-rsvd7e srl rd,imm8 tsetb addr(rd)
-rsvd9d srlb rbd,imm8 tsetb rbd
-rsvd9f srll rrd,imm8 xor rd,@@rs
-rsvdb9 sub rd,@@rs xor rd,addr
-rsvdbf sub rd,addr xor rd,addr(rs)
-sbc rd,rs sub rd,addr(rs) xor rd,imm16
-sbcb rbd,rbs sub rd,imm16 xor rd,rs
-sc imm8 sub rd,rs xorb rbd,@@rs
-sda rd,rs subb rbd,@@rs xorb rbd,addr
-sdab rbd,rs subb rbd,addr xorb rbd,addr(rs)
-sdal rrd,rs subb rbd,addr(rs) xorb rbd,imm8
-sdl rd,rs subb rbd,imm8 xorb rbd,rbs
-sdlb rbd,rs subb rbd,rbs xorb rbd,rbs
-sdll rrd,rs subl rrd,@@rs
-set @@rd,imm4 subl rrd,addr
-set addr(rd),imm4 subl rrd,addr(rs)
-@end smallexample
-@iftex
-@endgroup
-@end iftex
-@end ifset
-
-@end ifset
-
-@ifset MIPS
-@ifset GENERIC
-@page
-@node MIPS-Dependent
-@chapter MIPS Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter MIPS Dependent Features
-@end ifclear
-
-@cindex MIPS R2000
-@cindex MIPS R3000
-@cindex MIPS R4000
-@cindex MIPS R6000
-@sc{gnu} @code{@value{AS}} for @sc{mips} architectures supports the @sc{mips}
-@sc{r2000}, @sc{r3000}, @sc{r4000} and @sc{r6000} processors. For information
-about the @sc{mips} instruction set, see @cite{MIPS RISC Architecture}, by Kane
-and Heindrich (Prentice-Hall). For an overview of @sc{mips} assembly
-conventions, see ``Appendix D: Assembly Language Programming'' in the same
-work.
-
-@menu
-* MIPS Opts:: Assembler options
-* MIPS Object:: ECOFF object code
-* MIPS Stabs:: Directives for debugging information
-* MIPS ISA:: Directives to override the ISA level
-@end menu
-
-@node MIPS Opts
-@section Assembler options
-
-The @sc{mips} configurations of @sc{gnu} @code{@value{AS}} support these
-special options:
+This is often time consuming and not very useful, because the way we
+will find the bug is by running a single example under the debugger
+with breakpoints, not by pure deduction from a series of examples.
+We recommend that you save your time for something else.
-@table @code
-@cindex @code{-G} option (MIPS)
-@item -G @var{num}
-This option sets the largest size of an object that can be referenced
-implicitly with the @code{gp} register. It is only accepted for targets
-that use @sc{ecoff} format. The default value is 8.
-
-@cindex @code{-EB} option (MIPS)
-@cindex @code{-EL} option (MIPS)
-@cindex MIPS big-endian output
-@cindex MIPS little-endian output
-@cindex big-endian output, MIPS
-@cindex little-endian output, MIPS
-@item -EB
-@itemx -EL
-Any @sc{mips} configuration of @code{@value{AS}} can select big-endian or
-little-endian output at run time (unlike the other @sc{gnu} development
-tools, which must be configured for one or the other). Use @samp{-EB}
-to select big-endian output, and @samp{-EL} for little-endian.
+Of course, if you can find a simpler example to report @emph{instead}
+of the original one, that is a convenience for us. Errors in the
+output will be easier to spot, running under the debugger will take
+less time, and so on.
-@cindex MIPS architecture options
-@item -mips1
-@itemx -mips2
-@itemx -mips3
-Generate code for a particular MIPS Instruction Set Architecture level.
-@samp{-mips1} corresponds to the @sc{r2000} and @sc{r3000} processors,
-@samp{-mips2} to the @sc{r6000} processor, and @samp{-mips3} to the @sc{r4000}
-processor. You can also switch instruction sets during the assembly; see
-@ref{MIPS ISA,, Directives to override the ISA level}.
+However, simplification is not vital; if you do not want to do this,
+report the bug anyway and send us the entire test case you used.
-@item -m4650
-@item -no-m4650
-Generate code for the MIPS @sc{r4650} chip. This tells the assembler to accept
-the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
-instructions around accesses to the @samp{HI} and @samp{LO} registers.
-@samp{-no-m4650} turns off this option.
+@item
+A patch for the bug.
-@item -mcpu=@var{CPU}
-Generate code for a particular MIPS cpu. This has little effect on the
-assembler, but it is passed by @code{@value{GCC}}.
+A patch for the bug does help us if it is a good one. But do not omit
+the necessary information, such as the test case, on the assumption that
+a patch is all we need. We might see problems with your patch and decide
+to fix the problem another way, or we might not understand it at all.
-@cindex @code{-nocpp} ignored (MIPS)
-@item -nocpp
-This option is ignored. It is accepted for command-line compatibility with
-other assemblers, which use it to turn off C style preprocessing. With
-@sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
-@sc{gnu} assembler itself never runs the C preprocessor.
+Sometimes with a program as complicated as @code{@value{AS}} it is very hard to
+construct an example that will make the program follow a certain path through
+the code. If you do not send us the example, we will not be able to construct
+one, so we will not be able to verify that the bug is fixed.
-@item --trap
-@itemx --no-break
-@c FIXME! (1) reflect these options (next item too) in option summaries;
-@c (2) stop teasing, say _which_ instructions expanded _how_.
-@code{@value{AS}} automatically macro expands certain division and
-multiplication instructions to check for overflow and division by zero. This
-option causes @code{@value{AS}} to generate code to take a trap exception
-rather than a break exception when an error is detected. The trap instructions
-are only supported at Instruction Set Architecture level 2 and higher.
-
-@item --break
-@itemx --no-trap
-Generate code to take a break exception rather than a trap exception when an
-error is detected. This is the default.
-@end table
+And if we cannot understand what bug you are trying to fix, or why your
+patch should be an improvement, we will not install it. A test case will
+help us to understand.
-@node MIPS Object
-@section MIPS ECOFF object code
-
-@cindex ECOFF sections
-@cindex MIPS ECOFF sections
-Assembling for a @sc{mips} @sc{ecoff} target supports some additional sections
-besides the usual @code{.text}, @code{.data} and @code{.bss}. The
-additional sections are @code{.rdata}, used for read-only data,
-@code{.sdata}, used for small data, and @code{.sbss}, used for small
-common objects.
-
-@cindex small objects, MIPS ECOFF
-@cindex @code{gp} register, MIPS
-When assembling for @sc{ecoff}, the assembler uses the @code{$gp} (@code{$28})
-register to form the address of a ``small object''. Any object in the
-@code{.sdata} or @code{.sbss} sections is considered ``small'' in this sense.
-For external objects, or for objects in the @code{.bss} section, you can use
-the @code{@value{GCC}} @samp{-G} option to control the size of objects addressed via
-@code{$gp}; the default value is 8, meaning that a reference to any object
-eight bytes or smaller uses @code{$gp}. Passing @samp{-G 0} to
-@code{@value{AS}} prevents it from using the @code{$gp} register on the basis
-of object size (but the assembler uses @code{$gp} for objects in @code{.sdata}
-or @code{sbss} in any case). The size of an object in the @code{.bss} section
-is set by the @code{.comm} or @code{.lcomm} directive that defines it. The
-size of an external object may be set with the @code{.extern} directive. For
-example, @samp{.extern sym,4} declares that the object at @code{sym} is 4 bytes
-in length, whie leaving @code{sym} otherwise undefined.
-
-Using small @sc{ecoff} objects requires linker support, and assumes that the
-@code{$gp} register is correctly initialized (normally done automatically by
-the startup code). @sc{mips} @sc{ecoff} assembly code must not modify the
-@code{$gp} register.
-
-@node MIPS Stabs
-@section Directives for debugging information
-
-@cindex MIPS debugging directives
-@sc{mips} @sc{ecoff} @code{@value{AS}} supports several directives used for
-generating debugging information which are not support by traditional @sc{mips}
-assemblers. These are @code{.def}, @code{.endef}, @code{.dim}, @code{.file},
-@code{.scl}, @code{.size}, @code{.tag}, @code{.type}, @code{.val},
-@code{.stabd}, @code{.stabn}, and @code{.stabs}. The debugging information
-generated by the three @code{.stab} directives can only be read by @sc{gdb},
-not by traditional @sc{mips} debuggers (this enhancement is required to fully
-support C++ debugging). These directives are primarily used by compilers, not
-assembly language programmers!
-
-@node MIPS ISA
-@section Directives to override the ISA level
-
-@cindex MIPS ISA override
-@kindex @code{.set mips@var{n}}
-@sc{gnu} @code{@value{AS}} supports an additional directive to change the
-@sc{mips} Instruction Set Architecture level on the fly: @code{.set
-mips@var{n}}. @var{n} should be a number from 0 to 3. A value from 1 to 3
-makes the assembler accept instructions for the corresponding @sc{isa} level,
-from that point on in the assembly. @code{.set mips@var{n}} affects not only
-which instructions are permitted, but also how certain macros are expanded.
-@code{.set mips0} restores the @sc{isa} level to its original level: either the
-level you selected with command line options, or the default for your
-configuration. You can use this feature to permit specific @sc{r4000}
-instructions while assembling in 32 bit mode. Use this directive with care!
-
-Traditional @sc{mips} assemblers do not support this directive.
-@end ifset
+@item
+A guess about what the bug is or what it depends on.
-@ifset GENERIC
-@c reverse effect of @down at top of generic Machine-Dep chapter
-@raisesections
-@end ifset
+Such guesses are usually wrong. Even we cannot guess right about such
+things without first using the debugger to find the facts.
+@end itemize
@node Acknowledgements
@chapter Acknowledgements
If you have contributed to @code{@value{AS}} and your name isn't listed here,
it is not meant as a slight. We just don't know about it. Send mail to the
-maintainer, and we'll correct the situation. Currently (January 1994), the
-maintainer is Ken Raeburn (email address @code{raeburn@@cygnus.com}).
+maintainer, and we'll correct the situation. Currently
+@c (January 1994),
+the maintainer is Ken Raeburn (email address @code{raeburn@@cygnus.com}).
-Dean Elsner wrote the original @sc{gnu} assembler for the VAX.@footnote{Any more
-details?}
+Dean Elsner wrote the original @sc{gnu} assembler for the VAX.@footnote{Any
+more details?}
Jay Fenlason maintained GAS for a while, adding support for GDB-specific debug
information and the 68k series machines, most of the preprocessing pass, and
Ian Lance Taylor of Cygnus Support merged the Motorola and MIT syntax for the
68k, completed support for some COFF targets (68k, i386 SVR3, and SCO Unix),
-added support for MIPS ECOFF and ELF targets, and made a few other minor
-patches.
+added support for MIPS ECOFF and ELF targets, wrote the initial RS/6000 and
+PowerPC assembler, and made a few other minor patches.
Steve Chamberlain made @code{@value{AS}} able to generate listings.
Software Foundation (i386 mainly), and Ken Raeburn of Cygnus Support (sparc,
and some initial 64-bit support).
+Linas Vepstas added GAS support for the ESA/390 "IBM 370" architecture.
+
+Richard Henderson rewrote the Alpha assembler. Klaus Kaempf wrote GAS and BFD
+support for openVMS/Alpha.
+
+Timothy Wall, Michael Hayes, and Greg Smart contributed to the various tic*
+flavors.
+
Several engineers at Cygnus Support have also provided many small bug fixes and
configuration enhancements.
want to be, let us know. Some of the history has been lost; we are not
intentionally leaving anyone out.
+@node GNU Free Documentation License
+@chapter GNU Free Documentation License
+
+ GNU Free Documentation License
+
+ Version 1.1, March 2000
+
+ Copyright (C) 2000 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+0. PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+written document "free" in the sense of freedom: to assure everyone
+the effective freedom to copy and redistribute it, with or without
+modifying it, either commercially or noncommercially. Secondarily,
+this License preserves for the author and publisher a way to get
+credit for their work, while not being considered responsible for
+modifications made by others.
+
+This License is a kind of "copyleft", which means that derivative
+works of the document must themselves be free in the same sense. It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does. But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book. We recommend this License
+principally for works whose purpose is instruction or reference.
+
+
+1. APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work that contains a
+notice placed by the copyright holder saying it can be distributed
+under the terms of this License. The "Document", below, refers to any
+such manual or work. Any member of the public is a licensee, and is
+addressed as "you".
+
+A "Modified Version" of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A "Secondary Section" is a named appendix or a front-matter section of
+the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall subject
+(or to related matters) and contains nothing that could fall directly
+within that overall subject. (For example, if the Document is in part a
+textbook of mathematics, a Secondary Section may not explain any
+mathematics.) The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The "Invariant Sections" are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.
+
+The "Cover Texts" are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.
+
+A "Transparent" copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, whose contents can be viewed and edited directly and
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters. A copy made in an otherwise Transparent file
+format whose markup has been designed to thwart or discourage
+subsequent modification by readers is not Transparent. A copy that is
+not "Transparent" is called "Opaque".
+
+Examples of suitable formats for Transparent copies include plain
+ASCII without markup, Texinfo input format, LaTeX input format, SGML
+or XML using a publicly available DTD, and standard-conforming simple
+HTML designed for human modification. Opaque formats include
+PostScript, PDF, proprietary formats that can be read and edited only
+by proprietary word processors, SGML or XML for which the DTD and/or
+processing tools are not generally available, and the
+machine-generated HTML produced by some word processors for output
+purposes only.
+
+The "Title Page" means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page. For works in
+formats which do not have any title page as such, "Title Page" means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+
+2. VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License. You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute. However, you may accept
+compensation in exchange for copies. If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+
+3. COPYING IN QUANTITY
+
+If you publish printed copies of the Document numbering more than 100,
+and the Document's license notice requires Cover Texts, you must enclose
+the copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover. Both covers must also clearly and legibly identify
+you as the publisher of these copies. The front cover must present
+the full title with all words of the title equally prominent and
+visible. You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a publicly-accessible computer-network location containing a complete
+Transparent copy of the Document, free of added material, which the
+general network-using public has access to download anonymously at no
+charge using public-standard network protocols. If you use the latter
+option, you must take reasonably prudent steps, when you begin
+distribution of Opaque copies in quantity, to ensure that this
+Transparent copy will remain thus accessible at the stated location
+until at least one year after the last time you distribute an Opaque
+copy (directly or through your agents or retailers) of that edition to
+the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+
+4. MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it. In addition, you must do these things in the Modified Version:
+
+A. Use in the Title Page (and on the covers, if any) a title distinct
+ from that of the Document, and from those of previous versions
+ (which should, if there were any, be listed in the History section
+ of the Document). You may use the same title as a previous version
+ if the original publisher of that version gives permission.
+B. List on the Title Page, as authors, one or more persons or entities
+ responsible for authorship of the modifications in the Modified
+ Version, together with at least five of the principal authors of the
+ Document (all of its principal authors, if it has less than five).
+C. State on the Title page the name of the publisher of the
+ Modified Version, as the publisher.
+D. Preserve all the copyright notices of the Document.
+E. Add an appropriate copyright notice for your modifications
+ adjacent to the other copyright notices.
+F. Include, immediately after the copyright notices, a license notice
+ giving the public permission to use the Modified Version under the
+ terms of this License, in the form shown in the Addendum below.
+G. Preserve in that license notice the full lists of Invariant Sections
+ and required Cover Texts given in the Document's license notice.
+H. Include an unaltered copy of this License.
+I. Preserve the section entitled "History", and its title, and add to
+ it an item stating at least the title, year, new authors, and
+ publisher of the Modified Version as given on the Title Page. If
+ there is no section entitled "History" in the Document, create one
+ stating the title, year, authors, and publisher of the Document as
+ given on its Title Page, then add an item describing the Modified
+ Version as stated in the previous sentence.
+J. Preserve the network location, if any, given in the Document for
+ public access to a Transparent copy of the Document, and likewise
+ the network locations given in the Document for previous versions
+ it was based on. These may be placed in the "History" section.
+ You may omit a network location for a work that was published at
+ least four years before the Document itself, or if the original
+ publisher of the version it refers to gives permission.
+K. In any section entitled "Acknowledgements" or "Dedications",
+ preserve the section's title, and preserve in the section all the
+ substance and tone of each of the contributor acknowledgements
+ and/or dedications given therein.
+L. Preserve all the Invariant Sections of the Document,
+ unaltered in their text and in their titles. Section numbers
+ or the equivalent are not considered part of the section titles.
+M. Delete any section entitled "Endorsements". Such a section
+ may not be included in the Modified Version.
+N. Do not retitle any existing section as "Endorsements"
+ or to conflict in title with any Invariant Section.
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant. To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section entitled "Endorsements", provided it contains
+nothing but endorsements of your Modified Version by various
+parties--for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version. Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity. If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+
+5. COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy. If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections entitled "History"
+in the various original documents, forming one section entitled
+"History"; likewise combine any sections entitled "Acknowledgements",
+and any sections entitled "Dedications". You must delete all sections
+entitled "Endorsements."
+
+
+6. COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+
+7. AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, does not as a whole count as a Modified Version
+of the Document, provided no compilation copyright is claimed for the
+compilation. Such a compilation is called an "aggregate", and this
+License does not apply to the other self-contained works thus compiled
+with the Document, on account of their being thus compiled, if they
+are not themselves derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one quarter
+of the entire aggregate, the Document's Cover Texts may be placed on
+covers that surround only the Document within the aggregate.
+Otherwise they must appear on covers around the whole aggregate.
+
+
+8. TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections. You may include a
+translation of this License provided that you also include the
+original English version of this License. In case of a disagreement
+between the translation and the original English version of this
+License, the original English version will prevail.
+
+
+9. TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document except
+as expressly provided for under this License. Any other attempt to
+copy, modify, sublicense or distribute the Document is void, and will
+automatically terminate your rights under this License. However,
+parties who have received copies, or rights, from you under this
+License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+
+10. FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns. See
+http://www.gnu.org/copyleft/.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License "or any later version" applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation. If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.
+
+
+ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+ Copyright (c) YEAR YOUR NAME.
+ Permission is granted to copy, distribute and/or modify this document
+ under the terms of the GNU Free Documentation License, Version 1.1
+ or any later version published by the Free Software Foundation;
+ with the Invariant Sections being LIST THEIR TITLES, with the
+ Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
+ A copy of the license is included in the section entitled "GNU
+ Free Documentation License".
+@end smallexample
+
+If you have no Invariant Sections, write "with no Invariant Sections"
+instead of saying which ones are invariant. If you have no
+Front-Cover Texts, write "no Front-Cover Texts" instead of
+"Front-Cover Texts being LIST"; likewise for Back-Cover Texts.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
@node Index
@unnumbered Index