/* tc-mips.c -- assemble code for a MIPS chip.
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
- Free Software Foundation, Inc.
+ Copyright (C) 1993-2014 Free Software Foundation, Inc.
Contributed by the OSF and Ralph Campbell.
Written by Keith Knowles and Ralph Campbell, working independently.
Modified for ECOFF and R4000 support by Ian Lance Taylor of Cygnus
#define DBG(x)
#endif
+#define streq(a, b) (strcmp (a, b) == 0)
+
#define SKIP_SPACE_TABS(S) \
do { while (*(S) == ' ' || *(S) == '\t') ++(S); } while (0)
#define ISA_SUPPORTS_MIPS16E (mips_opts.isa == ISA_MIPS32 \
|| mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS32R3 \
+ || mips_opts.isa == ISA_MIPS32R5 \
|| mips_opts.isa == ISA_MIPS64 \
- || mips_opts.isa == ISA_MIPS64R2)
+ || mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.isa == ISA_MIPS64R3 \
+ || mips_opts.isa == ISA_MIPS64R5)
/* True if any microMIPS code was produced. */
static int file_ase_micromips;
|| (ISA) == ISA_MIPS4 \
|| (ISA) == ISA_MIPS5 \
|| (ISA) == ISA_MIPS64 \
- || (ISA) == ISA_MIPS64R2)
+ || (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5)
/* Return true if ISA supports 64 bit wide float registers. */
#define ISA_HAS_64BIT_FPRS(ISA) \
|| (ISA) == ISA_MIPS4 \
|| (ISA) == ISA_MIPS5 \
|| (ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS32R3 \
+ || (ISA) == ISA_MIPS32R5 \
|| (ISA) == ISA_MIPS64 \
- || (ISA) == ISA_MIPS64R2)
+ || (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5 )
/* Return true if ISA supports 64-bit right rotate (dror et al.)
instructions. */
#define ISA_HAS_DROR(ISA) \
((ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5 \
|| (mips_opts.micromips \
&& ISA_HAS_64BIT_REGS (ISA)) \
)
instructions. */
#define ISA_HAS_ROR(ISA) \
((ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS32R3 \
+ || (ISA) == ISA_MIPS32R5 \
|| (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5 \
|| (mips_opts.ase & ASE_SMARTMIPS) \
|| mips_opts.micromips \
)
#define ISA_HAS_ODD_SINGLE_FPR(ISA) \
((ISA) == ISA_MIPS32 \
|| (ISA) == ISA_MIPS32R2 \
+ || (ISA) == ISA_MIPS32R3 \
+ || (ISA) == ISA_MIPS32R5 \
|| (ISA) == ISA_MIPS64 \
- || (ISA) == ISA_MIPS64R2)
+ || (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5)
/* Return true if ISA supports move to/from high part of a 64-bit
floating-point register. */
#define ISA_HAS_MXHC1(ISA) \
((ISA) == ISA_MIPS32R2 \
- || (ISA) == ISA_MIPS64R2)
+ || (ISA) == ISA_MIPS32R3 \
+ || (ISA) == ISA_MIPS32R5 \
+ || (ISA) == ISA_MIPS64R2 \
+ || (ISA) == ISA_MIPS64R3 \
+ || (ISA) == ISA_MIPS64R5)
#define HAVE_32BIT_GPRS \
(mips_opts.gp32 || !ISA_HAS_64BIT_REGS (mips_opts.isa))
#define hilo_interlocks \
(mips_opts.isa == ISA_MIPS32 \
|| mips_opts.isa == ISA_MIPS32R2 \
+ || mips_opts.isa == ISA_MIPS32R3 \
+ || mips_opts.isa == ISA_MIPS32R5 \
|| mips_opts.isa == ISA_MIPS64 \
|| mips_opts.isa == ISA_MIPS64R2 \
+ || mips_opts.isa == ISA_MIPS64R3 \
+ || mips_opts.isa == ISA_MIPS64R5 \
|| mips_opts.arch == CPU_R4010 \
|| mips_opts.arch == CPU_R5900 \
|| mips_opts.arch == CPU_R10000 \
/* ...likewise -mfix-24k. */
static int mips_fix_24k;
+/* ...likewise -mfix-rm7000 */
+static int mips_fix_rm7000;
+
/* ...likewise -mfix-cn63xxp1 */
static bfd_boolean mips_fix_cn63xxp1;
OPTION_MIPS32,
OPTION_MIPS64,
OPTION_MIPS32R2,
+ OPTION_MIPS32R3,
+ OPTION_MIPS32R5,
OPTION_MIPS64R2,
+ OPTION_MIPS64R3,
+ OPTION_MIPS64R5,
OPTION_MIPS16,
OPTION_NO_MIPS16,
OPTION_MIPS3D,
OPTION_NO_DSPR2,
OPTION_EVA,
OPTION_NO_EVA,
+ OPTION_XPA,
+ OPTION_NO_XPA,
OPTION_MICROMIPS,
OPTION_NO_MICROMIPS,
OPTION_MCU,
OPTION_MNO_7000_HILO_FIX,
OPTION_FIX_24K,
OPTION_NO_FIX_24K,
+ OPTION_FIX_RM7000,
+ OPTION_NO_FIX_RM7000,
OPTION_FIX_LOONGSON2F_JUMP,
OPTION_NO_FIX_LOONGSON2F_JUMP,
OPTION_FIX_LOONGSON2F_NOP,
{"mips32", no_argument, NULL, OPTION_MIPS32},
{"mips64", no_argument, NULL, OPTION_MIPS64},
{"mips32r2", no_argument, NULL, OPTION_MIPS32R2},
+ {"mips32r3", no_argument, NULL, OPTION_MIPS32R3},
+ {"mips32r5", no_argument, NULL, OPTION_MIPS32R5},
{"mips64r2", no_argument, NULL, OPTION_MIPS64R2},
+ {"mips64r3", no_argument, NULL, OPTION_MIPS64R3},
+ {"mips64r5", no_argument, NULL, OPTION_MIPS64R5},
/* Options which specify Application Specific Extensions (ASEs). */
{"mips16", no_argument, NULL, OPTION_MIPS16},
{"mno-virt", no_argument, NULL, OPTION_NO_VIRT},
{"mmsa", no_argument, NULL, OPTION_MSA},
{"mno-msa", no_argument, NULL, OPTION_NO_MSA},
+ {"mxpa", no_argument, NULL, OPTION_XPA},
+ {"mno-xpa", no_argument, NULL, OPTION_NO_XPA},
/* Old-style architecture options. Don't add more of these. */
{"m4650", no_argument, NULL, OPTION_M4650},
{"mno-fix-vr4130", no_argument, NULL, OPTION_NO_FIX_VR4130},
{"mfix-24k", no_argument, NULL, OPTION_FIX_24K},
{"mno-fix-24k", no_argument, NULL, OPTION_NO_FIX_24K},
+ {"mfix-rm7000", no_argument, NULL, OPTION_FIX_RM7000},
+ {"mno-fix-rm7000", no_argument, NULL, OPTION_NO_FIX_RM7000},
{"mfix-cn63xxp1", no_argument, NULL, OPTION_FIX_CN63XXP1},
{"mno-fix-cn63xxp1", no_argument, NULL, OPTION_NO_FIX_CN63XXP1},
{ "msa", ASE_MSA, ASE_MSA64,
OPTION_MSA, OPTION_NO_MSA,
- 2, 2, 2, 2 }
+ 2, 2, 2, 2 },
+
+ { "xpa", ASE_XPA, 0,
+ OPTION_XPA, OPTION_NO_XPA,
+ 2, 2, -1, -1 }
};
/* The set of ASEs that require -mfp64. */
if (mips_opts.isa == ISA_MIPS32R2 || mips_opts.isa == ISA_MIPS64R2)
return 2;
+ if (mips_opts.isa == ISA_MIPS32R3 || mips_opts.isa == ISA_MIPS64R3)
+ return 3;
+
+ if (mips_opts.isa == ISA_MIPS32R5 || mips_opts.isa == ISA_MIPS64R5)
+ return 5;
+
/* microMIPS implies revision 2 or above. */
if (mips_opts.micromips)
return 2;
return NUM_FIX_VR4120_CLASSES;
}
-#define INSN_ERET 0x42000018
-#define INSN_DERET 0x4200001f
+#define INSN_ERET 0x42000018
+#define INSN_DERET 0x4200001f
+#define INSN_DMULT 0x1c
+#define INSN_DMULTU 0x1d
/* Return the number of instructions that must separate INSN1 and INSN2,
where INSN1 is the earlier instruction. Return the worst-case value
}
}
+ /* If we're working around PMC RM7000 errata, there must be three
+ nops between a dmult and a load instruction. */
+ if (mips_fix_rm7000 && !mips_opts.micromips)
+ {
+ if ((insn1->insn_opcode & insn1->insn_mo->mask) == INSN_DMULT
+ || (insn1->insn_opcode & insn1->insn_mo->mask) == INSN_DMULTU)
+ {
+ if (pinfo2 & INSN_LOAD_MEMORY)
+ return 3;
+ }
+ }
+
/* If working around VR4120 errata, check for combinations that need
a single intervening instruction. */
if (mips_fix_vr4120 && !mips_opts.micromips)
file_mips_isa = ISA_MIPS32R2;
break;
+ case OPTION_MIPS32R3:
+ file_mips_isa = ISA_MIPS32R3;
+ break;
+
+ case OPTION_MIPS32R5:
+ file_mips_isa = ISA_MIPS32R5;
+ break;
+
case OPTION_MIPS64R2:
file_mips_isa = ISA_MIPS64R2;
break;
+ case OPTION_MIPS64R3:
+ file_mips_isa = ISA_MIPS64R3;
+ break;
+
+ case OPTION_MIPS64R5:
+ file_mips_isa = ISA_MIPS64R5;
+ break;
+
case OPTION_MIPS64:
file_mips_isa = ISA_MIPS64;
break;
mips_fix_24k = 0;
break;
+ case OPTION_FIX_RM7000:
+ mips_fix_rm7000 = 1;
+ break;
+
+ case OPTION_NO_FIX_RM7000:
+ mips_fix_rm7000 = 0;
+ break;
+
case OPTION_FIX_LOONGSON2F_JUMP:
mips_fix_loongson2f_jump = TRUE;
break;
/* Return the address of the delay slot. */
return addr + 4;
- case BFD_RELOC_32_PCREL:
- return addr;
-
default:
- /* We have no relocation type for PC relative MIPS16 instructions. */
- if (fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != now_seg)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("PC relative MIPS16 instruction references"
- " a different section"));
return addr;
}
}
unsigned long insn;
reloc_howto_type *howto;
- /* We ignore generic BFD relocations we don't know about. */
- howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type);
- if (! howto)
- return;
+ if (fixP->fx_pcrel)
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_16_PCREL_S2:
+ case BFD_RELOC_MICROMIPS_7_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_10_PCREL_S1:
+ case BFD_RELOC_MICROMIPS_16_PCREL_S1:
+ case BFD_RELOC_32_PCREL:
+ break;
+
+ case BFD_RELOC_32:
+ fixP->fx_r_type = BFD_RELOC_32_PCREL;
+ break;
+
+ default:
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("PC-relative reference to a different section"));
+ break;
+ }
+
+ /* Handle BFD_RELOC_8, since it's easy. Punt on other bfd relocations
+ that have no MIPS ELF equivalent. */
+ if (fixP->fx_r_type != BFD_RELOC_8)
+ {
+ howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type);
+ if (!howto)
+ return;
+ }
gas_assert (fixP->fx_size == 2
|| fixP->fx_size == 4
+ || fixP->fx_r_type == BFD_RELOC_8
|| fixP->fx_r_type == BFD_RELOC_16
|| fixP->fx_r_type == BFD_RELOC_64
|| fixP->fx_r_type == BFD_RELOC_CTOR
buf = fixP->fx_frag->fr_literal + fixP->fx_where;
- gas_assert (!fixP->fx_pcrel || fixP->fx_r_type == BFD_RELOC_16_PCREL_S2
- || fixP->fx_r_type == BFD_RELOC_MICROMIPS_7_PCREL_S1
- || fixP->fx_r_type == BFD_RELOC_MICROMIPS_10_PCREL_S1
- || fixP->fx_r_type == BFD_RELOC_MICROMIPS_16_PCREL_S1
- || fixP->fx_r_type == BFD_RELOC_32_PCREL);
-
/* Don't treat parts of a composite relocation as done. There are two
reasons for this:
case BFD_RELOC_32:
case BFD_RELOC_32_PCREL:
case BFD_RELOC_16:
+ case BFD_RELOC_8:
/* If we are deleting this reloc entry, we must fill in the
value now. This can happen if we have a .word which is not
resolved when it appears but is later defined. */
case ISA_MIPS2:
case ISA_MIPS32:
case ISA_MIPS32R2:
+ case ISA_MIPS32R3:
+ case ISA_MIPS32R5:
mips_opts.gp32 = 1;
mips_opts.fp32 = 1;
break;
case ISA_MIPS5:
case ISA_MIPS64:
case ISA_MIPS64R2:
+ case ISA_MIPS64R3:
+ case ISA_MIPS64R5:
mips_opts.gp32 = 0;
if (mips_opts.arch == CPU_R5900)
{
{ "mips5", MIPS_CPU_IS_ISA, 0, ISA_MIPS5, CPU_MIPS5 },
{ "mips32", MIPS_CPU_IS_ISA, 0, ISA_MIPS32, CPU_MIPS32 },
{ "mips32r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "mips32r3", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R3, CPU_MIPS32R3 },
+ { "mips32r5", MIPS_CPU_IS_ISA, 0, ISA_MIPS32R5, CPU_MIPS32R5 },
{ "mips64", MIPS_CPU_IS_ISA, 0, ISA_MIPS64, CPU_MIPS64 },
{ "mips64r2", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R2, CPU_MIPS64R2 },
+ { "mips64r3", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R3, CPU_MIPS64R3 },
+ { "mips64r5", MIPS_CPU_IS_ISA, 0, ISA_MIPS64R5, CPU_MIPS64R5 },
/* MIPS I */
{ "r3000", 0, 0, ISA_MIPS1, CPU_R3000 },
{ "1004kf2_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "1004kf", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
{ "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ /* P5600 with EVA and Virtualization ASEs, other ASEs are optional. */
+ { "p5600", 0, ASE_VIRT | ASE_EVA | ASE_XPA, ISA_MIPS32R5, CPU_MIPS32R5 },
/* MIPS 64 */
{ "5kc", 0, 0, ISA_MIPS64, CPU_MIPS64 },
/* Broadcom SB-1A CPU core */
{ "sb1a", 0, ASE_MIPS3D | ASE_MDMX, ISA_MIPS64, CPU_SB1 },
- { "loongson3a", 0, 0, ISA_MIPS64, CPU_LOONGSON_3A },
+ { "loongson3a", 0, 0, ISA_MIPS64R2, CPU_LOONGSON_3A },
/* MIPS 64 Release 2 */
-mips5 generate MIPS ISA V instructions\n\
-mips32 generate MIPS32 ISA instructions\n\
-mips32r2 generate MIPS32 release 2 ISA instructions\n\
+-mips32r3 generate MIPS32 release 3 ISA instructions\n\
+-mips32r5 generate MIPS32 release 5 ISA instructions\n\
-mips64 generate MIPS64 ISA instructions\n\
-mips64r2 generate MIPS64 release 2 ISA instructions\n\
+-mips64r3 generate MIPS64 release 3 ISA instructions\n\
+-mips64r5 generate MIPS64 release 5 ISA instructions\n\
-march=CPU/-mtune=CPU generate code/schedule for CPU, where CPU is one of:\n"));
first = 1;
-mmsa generate MSA instructions\n\
-mno-msa do not generate MSA instructions\n"));
fprintf (stream, _("\
+-mxpa generate eXtended Physical Address (XPA) instructions\n\
+-mno-xpa do not generate eXtended Physical Address (XPA) instructions\n"));
+ fprintf (stream, _("\
-mvirt generate Virtualization instructions\n\
-mno-virt do not generate Virtualization instructions\n"));
fprintf (stream, _("\
return regnum;
}
+
+/* Implement CONVERT_SYMBOLIC_ATTRIBUTE.
+ Given a symbolic attribute NAME, return the proper integer value.
+ Returns -1 if the attribute is not known. */
+
+int
+mips_convert_symbolic_attribute (const char *name)
+{
+ static const struct
+ {
+ const char * name;
+ const int tag;
+ }
+ attribute_table[] =
+ {
+#define T(tag) {#tag, tag}
+ T (Tag_GNU_MIPS_ABI_FP),
+ T (Tag_GNU_MIPS_ABI_MSA),
+#undef T
+ };
+ unsigned int i;
+
+ if (name == NULL)
+ return -1;
+
+ for (i = 0; i < ARRAY_SIZE (attribute_table); i++)
+ if (streq (name, attribute_table[i].name))
+ return attribute_table[i].tag;
+
+ return -1;
+}
projects / external / binutils.git / blobdiff