/* tc-i960.c - All the i80960-specific stuff
- Copyright (C) 1989, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
- Free Software Foundation, Inc.
+ Copyright (C) 1989-2016 Free Software Foundation, Inc.
This file is part of GAS.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
/* See comment on md_parse_option for 80960-specific invocation options. */
less than 4096 is specified, in which case we need neither a fixup nor
a relocation directive. */
-#include <stdio.h>
-#include <ctype.h>
-
#include "as.h"
-#include "obstack.h"
+#include "safe-ctype.h"
#include "opcode/i960.h"
#if defined (OBJ_AOUT) || defined (OBJ_BOUT)
-#define TC_S_IS_SYSPROC(s) ((1<=S_GET_OTHER(s)) && (S_GET_OTHER(s)<=32))
-#define TC_S_IS_BALNAME(s) (S_GET_OTHER(s) == N_BALNAME)
-#define TC_S_IS_CALLNAME(s) (S_GET_OTHER(s) == N_CALLNAME)
-#define TC_S_IS_BADPROC(s) ((S_GET_OTHER(s) != 0) && !TC_S_IS_CALLNAME(s) && !TC_S_IS_BALNAME(s) && !TC_S_IS_SYSPROC(s))
+#define TC_S_IS_SYSPROC(s) ((1 <= S_GET_OTHER (s)) && (S_GET_OTHER (s) <= 32))
+#define TC_S_IS_BALNAME(s) (S_GET_OTHER (s) == N_BALNAME)
+#define TC_S_IS_CALLNAME(s) (S_GET_OTHER (s) == N_CALLNAME)
+#define TC_S_IS_BADPROC(s) ((S_GET_OTHER (s) != 0) && !TC_S_IS_CALLNAME (s) && !TC_S_IS_BALNAME (s) && !TC_S_IS_SYSPROC (s))
-#define TC_S_SET_SYSPROC(s, p) (S_SET_OTHER((s), (p)+1))
-#define TC_S_GET_SYSPROC(s) (S_GET_OTHER(s)-1)
+#define TC_S_SET_SYSPROC(s, p) (S_SET_OTHER ((s), (p) + 1))
+#define TC_S_GET_SYSPROC(s) (S_GET_OTHER (s) - 1)
-#define TC_S_FORCE_TO_BALNAME(s) (S_SET_OTHER((s), N_BALNAME))
-#define TC_S_FORCE_TO_CALLNAME(s) (S_SET_OTHER((s), N_CALLNAME))
+#define TC_S_FORCE_TO_BALNAME(s) (S_SET_OTHER ((s), N_BALNAME))
+#define TC_S_FORCE_TO_CALLNAME(s) (S_SET_OTHER ((s), N_CALLNAME))
#define TC_S_FORCE_TO_SYSPROC(s) {;}
#else /* ! OBJ_A/BOUT */
#ifdef OBJ_COFF
-#define TC_S_IS_SYSPROC(s) (S_GET_STORAGE_CLASS(s) == C_SCALL)
-#define TC_S_IS_BALNAME(s) (SF_GET_BALNAME(s))
-#define TC_S_IS_CALLNAME(s) (SF_GET_CALLNAME(s))
-#define TC_S_IS_BADPROC(s) (TC_S_IS_SYSPROC(s) && TC_S_GET_SYSPROC(s) < 0 && 31 < TC_S_GET_SYSPROC(s))
+#define TC_S_IS_SYSPROC(s) (S_GET_STORAGE_CLASS (s) == C_SCALL)
+#define TC_S_IS_BALNAME(s) (SF_GET_BALNAME (s))
+#define TC_S_IS_CALLNAME(s) (SF_GET_CALLNAME (s))
+#define TC_S_IS_BADPROC(s) (TC_S_IS_SYSPROC (s) && TC_S_GET_SYSPROC (s) < 0 && 31 < TC_S_GET_SYSPROC (s))
#define TC_S_SET_SYSPROC(s, p) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx = (p))
#define TC_S_GET_SYSPROC(s) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx)
-#define TC_S_FORCE_TO_BALNAME(s) (SF_SET_BALNAME(s))
-#define TC_S_FORCE_TO_CALLNAME(s) (SF_SET_CALLNAME(s))
-#define TC_S_FORCE_TO_SYSPROC(s) (S_SET_STORAGE_CLASS((s), C_SCALL))
+#define TC_S_FORCE_TO_BALNAME(s) (SF_SET_BALNAME (s))
+#define TC_S_FORCE_TO_CALLNAME(s) (SF_SET_CALLNAME (s))
+#define TC_S_FORCE_TO_SYSPROC(s) (S_SET_STORAGE_CLASS ((s), C_SCALL))
#else /* ! OBJ_COFF */
#ifdef OBJ_ELF
#define TC_S_IS_BADPROC(s) 0
#define TC_S_SET_SYSPROC(s, p)
-#define TC_S_GET_SYSPROC(s) 0
+#define TC_S_GET_SYSPROC(s) 0
#define TC_S_FORCE_TO_BALNAME(s)
#define TC_S_FORCE_TO_CALLNAME(s)
extern char *input_line_pointer;
-#if !defined (BFD_ASSEMBLER) && !defined (BFD)
-#ifdef OBJ_COFF
-const int md_reloc_size = sizeof (struct reloc);
-#else /* OBJ_COFF */
-const int md_reloc_size = sizeof (struct relocation_info);
-#endif /* OBJ_COFF */
-#endif
-
/* Local i80960 routines. */
+struct memS;
+struct regop;
-static void brcnt_emit (); /* Emit branch-prediction instrumentation code */
-static char *brlab_next (); /* Return next branch local label */
-void brtab_emit (); /* Emit br-predict instrumentation table */
-static void cobr_fmt (); /* Generate COBR instruction */
-static void ctrl_fmt (); /* Generate CTRL instruction */
-static char *emit (); /* Emit (internally) binary */
-static int get_args (); /* Break arguments out of comma-separated list */
-static void get_cdisp (); /* Handle COBR or CTRL displacement */
-static char *get_ispec (); /* Find index specification string */
-static int get_regnum (); /* Translate text to register number */
-static int i_scan (); /* Lexical scan of instruction source */
-static void mem_fmt (); /* Generate MEMA or MEMB instruction */
-static void mema_to_memb (); /* Convert MEMA instruction to MEMB format */
-static void parse_expr (); /* Parse an expression */
-static int parse_ldconst (); /* Parse and replace a 'ldconst' pseudo-op */
-static void parse_memop (); /* Parse a memory operand */
-static void parse_po (); /* Parse machine-dependent pseudo-op */
-static void parse_regop (); /* Parse a register operand */
-static void reg_fmt (); /* Generate a REG format instruction */
-void reloc_callj (); /* Relocate a 'callj' instruction */
-static void relax_cobr (); /* "De-optimize" cobr into compare/branch */
-static void s_leafproc (); /* Process '.leafproc' pseudo-op */
-static void s_sysproc (); /* Process '.sysproc' pseudo-op */
-static int shift_ok (); /* Will a 'shlo' substiture for a 'ldconst'? */
-static void syntax (); /* Give syntax error */
-static int targ_has_sfr (); /* Target chip supports spec-func register? */
-static int targ_has_iclass (); /* Target chip supports instruction set? */
-
-/* See md_parse_option() for meanings of these options */
-static char norelax; /* True if -norelax switch seen */
-static char instrument_branches; /* True if -b switch seen */
+/* See md_parse_option() for meanings of these options. */
+static char norelax; /* True if -norelax switch seen. */
+static char instrument_branches; /* True if -b switch seen. */
/* Characters that always start a comment.
- If the pre-processor is disabled, these aren't very useful.
- */
+ If the pre-processor is disabled, these aren't very useful. */
const char comment_chars[] = "#";
/* Characters that only start a comment at the beginning of
Note that input_file.c hand checks for '#' at the beginning of the
first line of the input file. This is because the compiler outputs
- #NO_APP at the beginning of its output.
- */
+ #NO_APP at the beginning of its output. */
/* Also note that comments started like this one will always work. */
-const char line_comment_chars[] = "";
-
+const char line_comment_chars[] = "#";
const char line_separator_chars[] = ";";
-/* Chars that can be used to separate mant from exp in floating point nums */
+/* Chars that can be used to separate mant from exp in floating point nums. */
const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant,
- as in 0f12.456 or 0d1.2345e12
- */
+ as in 0f12.456 or 0d1.2345e12. */
const char FLT_CHARS[] = "fFdDtT";
/* Table used by base assembler to relax addresses based on varying length
For i80960, the only application is the (de-)optimization of cobr
instructions into separate compare and branch instructions when a 13-bit
- displacement won't hack it.
- */
+ displacement won't hack it. */
const relax_typeS md_relax_table[] =
{
- {0, 0, 0, 0}, /* State 0 => no more relaxation possible */
- {4088, -4096, 0, 2}, /* State 1: conditional branch (cobr) */
- {0x800000 - 8, -0x800000, 4, 0}, /* State 2: compare (reg) & branch (ctrl) */
+ {0, 0, 0, 0}, /* State 0 => no more relaxation possible. */
+ {4088, -4096, 0, 2}, /* State 1: conditional branch (cobr). */
+ {0x800000 - 8, -0x800000, 4, 0}, /* State 2: compare (reg) & branch (ctrl). */
};
-static void s_endian PARAMS ((int));
-
/* These are the machine dependent pseudo-ops.
This table describes all the machine specific pseudo-ops the assembler
has to support. The fields are:
pseudo-op name without dot
function to call to execute this pseudo-op
- integer arg to pass to the function
- */
+ integer arg to pass to the function. */
#define S_LEAFPROC 1
#define S_SYSPROC 2
-const pseudo_typeS md_pseudo_table[] =
-{
- {"bss", s_lcomm, 1},
- {"endian", s_endian, 0},
- {"extended", float_cons, 't'},
- {"leafproc", parse_po, S_LEAFPROC},
- {"sysproc", parse_po, S_SYSPROC},
-
- {"word", cons, 4},
- {"quad", cons, 16},
-
- {0, 0, 0}
-};
-\f
-/* Macros to extract info from an 'expressionS' structure 'e' */
+/* Macros to extract info from an 'expressionS' structure 'e'. */
#define adds(e) e.X_add_symbol
#define offs(e) e.X_add_number
-/* Branch-prediction bits for CTRL/COBR format opcodes */
-#define BP_MASK 0x00000002 /* Mask for branch-prediction bit */
-#define BP_TAKEN 0x00000000 /* Value to OR in to predict branch */
-#define BP_NOT_TAKEN 0x00000002 /* Value to OR in to predict no branch */
+/* Branch-prediction bits for CTRL/COBR format opcodes. */
+#define BP_MASK 0x00000002 /* Mask for branch-prediction bit. */
+#define BP_TAKEN 0x00000000 /* Value to OR in to predict branch. */
+#define BP_NOT_TAKEN 0x00000002 /* Value to OR in to predict no branch. */
-/* Some instruction opcodes that we need explicitly */
+/* Some instruction opcodes that we need explicitly. */
#define BE 0x12000000
#define BG 0x11000000
#define BGE 0x13000000
used). */
#define MEMA_ABASE 0x2000
-/* Info from which a MEMA or MEMB format instruction can be generated */
-typedef struct
+/* Info from which a MEMA or MEMB format instruction can be generated. */
+typedef struct memS
{
- /* (First) 32 bits of instruction */
+ /* (First) 32 bits of instruction. */
long opcode;
- /* 0-(none), 12- or, 32-bit displacement needed */
+ /* 0-(none), 12- or, 32-bit displacement needed. */
int disp;
/* The expression in the source instruction from which the
displacement should be determined. */
char *e;
}
-
memS;
-/* The two pieces of info we need to generate a register operand */
+/* The two pieces of info we need to generate a register operand. */
struct regop
{
- int mode; /* 0 =>local/global/spec reg; 1=> literal or fp reg */
- int special; /* 0 =>not a sfr; 1=> is a sfr (not valid w/mode=0) */
- int n; /* Register number or literal value */
+ int mode; /* 0 =>local/global/spec reg; 1=> literal or fp reg. */
+ int special; /* 0 =>not a sfr; 1=> is a sfr (not valid w/mode=0). */
+ int n; /* Register number or literal value. */
};
/* Number and assembler mnemonic for all registers that can appear in
operands. */
static const struct
{
- char *reg_name;
+ const char *reg_name;
int reg_num;
}
regnames[] =
/* Number and assembler mnemonic for all registers that can appear as
'abase' (indirect addressing) registers. */
static const struct
- {
- char *areg_name;
- int areg_num;
- }
+{
+ const char *areg_name;
+ int areg_num;
+}
aregs[] =
{
{ "(pfp)", 0 },
{ NULL, 0 }, /* END OF LIST */
};
-/* Hash tables */
-static struct hash_control *op_hash; /* Opcode mnemonics */
-static struct hash_control *reg_hash; /* Register name hash table */
-static struct hash_control *areg_hash; /* Abase register hash table */
+/* Hash tables. */
+static struct hash_control *op_hash; /* Opcode mnemonics. */
+static struct hash_control *reg_hash; /* Register name hash table. */
+static struct hash_control *areg_hash; /* Abase register hash table. */
-/* Architecture for which we are assembling */
-#define ARCH_ANY 0 /* Default: no architecture checking done */
+/* Architecture for which we are assembling. */
+#define ARCH_ANY 0 /* Default: no architecture checking done. */
#define ARCH_KA 1
#define ARCH_KB 2
#define ARCH_MC 3
#define ARCH_CA 4
#define ARCH_JX 5
#define ARCH_HX 6
-int architecture = ARCH_ANY; /* Architecture requested on invocation line */
+int architecture = ARCH_ANY; /* Architecture requested on invocation line. */
int iclasses_seen; /* OR of instruction classes (I_* constants)
- * for which we've actually assembled
- * instructions.
- */
+ for which we've actually assembled
+ instructions. */
/* BRANCH-PREDICTION INSTRUMENTATION
Note that input source code is expected to already contain calls
an external routine that will link the branch local table into a
- list of such tables.
- */
+ list of such tables. */
/* Number of branches instrumented so far. Also used to generate
unique local labels for each instrumented branch. */
#define BR_TAB_NAME "__BRANCH_TABLE__"
/* Name of the table of pointers to branches. A local (i.e.,
non-external) symbol. */
-\f
-/*****************************************************************************
- md_begin: One-time initialization.
- Set up hash tables.
+static void ctrl_fmt (char *, long, int);
- *************************************************************************** */
+\f
void
-md_begin ()
+md_begin (void)
{
- int i; /* Loop counter */
- const struct i960_opcode *oP; /* Pointer into opcode table */
- const char *retval; /* Value returned by hash functions */
+ int i; /* Loop counter. */
+ const struct i960_opcode *oP; /* Pointer into opcode table. */
+ const char *retval; /* Value returned by hash functions. */
op_hash = hash_new ();
reg_hash = hash_new ();
retval = 0;
for (oP = i960_opcodes; oP->name && !retval; oP++)
- retval = hash_insert (op_hash, oP->name, (PTR) oP);
+ retval = hash_insert (op_hash, oP->name, (void *) oP);
for (i = 0; regnames[i].reg_name && !retval; i++)
retval = hash_insert (reg_hash, regnames[i].reg_name,
as_fatal (_("Hashing returned \"%s\"."), retval);
}
-/*****************************************************************************
- md_assemble: Assemble an instruction
+/* parse_expr: parse an expression
- Assumptions about the passed-in text:
- - all comments, labels removed
- - text is an instruction
- - all white space compressed to single blanks
- - all character constants have been replaced with decimal
+ Use base assembler's expression parser to parse an expression.
+ It, unfortunately, runs off a global which we have to save/restore
+ in order to make it work for us.
- *************************************************************************** */
-void
-md_assemble (textP)
- char *textP; /* Source text of instruction */
-{
- /* Parsed instruction text, containing NO whitespace: arg[0]->opcode
- mnemonic arg[1-3]->operands, with char constants replaced by
- decimal numbers. */
- char *args[4];
+ An empty expression string is treated as an absolute 0.
- int n_ops; /* Number of instruction operands */
- /* Pointer to instruction description */
- struct i960_opcode *oP;
- /* TRUE iff opcode mnemonic included branch-prediction suffix (".f"
- or ".t"). */
- int branch_predict;
- /* Setting of branch-prediction bit(s) to be OR'd into instruction
- opcode of CTRL/COBR format instructions. */
- long bp_bits;
+ Sets O_illegal regardless of expression evaluation if entire input
+ string is not consumed in the evaluation -- tolerate no dangling junk! */
- int n; /* Offset of last character in opcode mnemonic */
+static void
+parse_expr (char *textP, /* Text of expression to be parsed. */
+ expressionS *expP) /* Where to put the results of parsing. */
+{
+ char *save_in; /* Save global here. */
+ symbolS *symP;
- const char *bp_error_msg = _("branch prediction invalid on this opcode");
+ know (textP);
- /* Parse instruction into opcode and operands */
- memset (args, '\0', sizeof (args));
- n_ops = i_scan (textP, args);
- if (n_ops == -1)
+ if (*textP == '\0')
{
- return; /* Error message already issued */
+ /* Treat empty string as absolute 0. */
+ expP->X_add_symbol = expP->X_op_symbol = NULL;
+ expP->X_add_number = 0;
+ expP->X_op = O_constant;
}
-
- /* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction */
- if (!strcmp (args[0], "ldconst"))
+ else
{
- n_ops = parse_ldconst (args);
- if (n_ops == -1)
- {
- return;
- }
- }
+ save_in = input_line_pointer; /* Save global. */
+ input_line_pointer = textP; /* Make parser work for us. */
- /* Check for branch-prediction suffix on opcode mnemonic, strip it off */
- n = strlen (args[0]) - 1;
- branch_predict = 0;
- bp_bits = 0;
- if (args[0][n - 1] == '.' && (args[0][n] == 't' || args[0][n] == 'f'))
- {
- /* We could check here to see if the target architecture
- supports branch prediction, but why bother? The bit will
- just be ignored by processors that don't use it. */
- branch_predict = 1;
- bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN;
- args[0][n - 1] = '\0'; /* Strip suffix from opcode mnemonic */
- }
+ (void) expression (expP);
+ if ((size_t) (input_line_pointer - textP) != strlen (textP))
+ /* Did not consume all of the input. */
+ expP->X_op = O_illegal;
- /* Look up opcode mnemonic in table and check number of operands.
- Check that opcode is legal for the target architecture. If all
- looks good, assemble instruction. */
- oP = (struct i960_opcode *) hash_find (op_hash, args[0]);
- if (!oP || !targ_has_iclass (oP->iclass))
- {
- as_bad (_("invalid opcode, \"%s\"."), args[0]);
+ symP = expP->X_add_symbol;
+ if (symP && (hash_find (reg_hash, S_GET_NAME (symP))))
+ /* Register name in an expression. */
+ /* FIXME: this isn't much of a check any more. */
+ expP->X_op = O_illegal;
+ input_line_pointer = save_in; /* Restore global. */
}
- else if (n_ops != oP->num_ops)
- {
- as_bad (_("improper number of operands. expecting %d, got %d"),
- oP->num_ops, n_ops);
- }
- else
+}
+
+/* emit: output instruction binary
+
+ Output instruction binary, in target byte order, 4 bytes at a time.
+ Return pointer to where it was placed. */
+
+static char *
+emit (long instr) /* Word to be output, host byte order. */
+{
+ char *toP; /* Where to output it. */
+
+ toP = frag_more (4); /* Allocate storage. */
+ md_number_to_chars (toP, instr, 4); /* Convert to target byte order. */
+ return toP;
+}
+
+/* get_cdisp: handle displacement for a COBR or CTRL instruction.
+
+ Parse displacement for a COBR or CTRL instruction.
+
+ If successful, output the instruction opcode and set up for it,
+ depending on the arg 'var_frag', either:
+ o an address fixup to be done when all symbol values are known, or
+ o a varying length code fragment, with address fixup info. This
+ will be done for cobr instructions that may have to be relaxed
+ in to compare/branch instructions (8 bytes) if the final
+ address displacement is greater than 13 bits. */
+
+static void
+get_cdisp (char *dispP, /* Displacement as specified in source instruction. */
+ const char *ifmtP, /* "COBR" or "CTRL" (for use in error message). */
+ long instr, /* Instruction needing the displacement. */
+ int numbits, /* # bits of displacement (13 for COBR, 24 for CTRL). */
+ int var_frag,/* 1 if varying length code fragment should be emitted;
+ 0 if an address fix should be emitted. */
+ int callj) /* 1 if callj relocation should be done; else 0. */
+{
+ expressionS e; /* Parsed expression. */
+ fixS *fixP; /* Structure describing needed address fix. */
+ char *outP; /* Where instruction binary is output to. */
+
+ fixP = NULL;
+
+ parse_expr (dispP, &e);
+ switch (e.X_op)
{
- switch (oP->format)
+ case O_illegal:
+ as_bad (_("expression syntax error"));
+
+ case O_symbol:
+ if (S_GET_SEGMENT (e.X_add_symbol) == now_seg
+ || S_GET_SEGMENT (e.X_add_symbol) == undefined_section)
{
- case FBRA:
- case CTRL:
- ctrl_fmt (args[1], oP->opcode | bp_bits, oP->num_ops);
- if (oP->format == FBRA)
- {
- /* Now generate a 'bno' to same arg */
- ctrl_fmt (args[1], BNO | bp_bits, 1);
- }
- break;
- case COBR:
- case COJ:
- cobr_fmt (args, oP->opcode | bp_bits, oP);
- break;
- case REG:
- if (branch_predict)
- {
- as_warn (bp_error_msg);
- }
- reg_fmt (args, oP);
- break;
- case MEM1:
- if (args[0][0] == 'c' && args[0][1] == 'a')
- {
- if (branch_predict)
- {
- as_warn (bp_error_msg);
- }
- mem_fmt (args, oP, 1);
- break;
- }
- case MEM2:
- case MEM4:
- case MEM8:
- case MEM12:
- case MEM16:
- if (branch_predict)
+ if (var_frag)
{
- as_warn (bp_error_msg);
+ outP = frag_more (8); /* Allocate worst-case storage. */
+ md_number_to_chars (outP, instr, 4);
+ frag_variant (rs_machine_dependent, 4, 4, 1,
+ adds (e), offs (e), outP);
}
- mem_fmt (args, oP, 0);
- break;
- case CALLJ:
- if (branch_predict)
+ else
{
- as_warn (bp_error_msg);
+ /* Set up a new fix structure, so address can be updated
+ when all symbol values are known. */
+ outP = emit (instr);
+ fixP = fix_new (frag_now,
+ outP - frag_now->fr_literal,
+ 4,
+ adds (e),
+ offs (e),
+ 1,
+ NO_RELOC);
+
+ fixP->fx_tcbit = callj;
+
+ /* We want to modify a bit field when the address is
+ known. But we don't need all the garbage in the
+ bit_fix structure. So we're going to lie and store
+ the number of bits affected instead of a pointer. */
+ fixP->fx_bit_fixP = (bit_fixS *) (size_t) numbits;
}
- /* Output opcode & set up "fixup" (relocation); flag
- relocation as 'callj' type. */
- know (oP->num_ops == 1);
- get_cdisp (args[1], "CTRL", oP->opcode, 24, 0, 1);
- break;
- default:
- BAD_CASE (oP->format);
- break;
}
- }
-} /* md_assemble() */
-
-/*****************************************************************************
- md_number_to_chars: convert a number to target byte order
+ else
+ as_bad (_("attempt to branch into different segment"));
+ break;
- *************************************************************************** */
-void
-md_number_to_chars (buf, value, n)
- char *buf;
- valueT value;
- int n;
-{
- number_to_chars_littleendian (buf, value, n);
+ default:
+ as_bad (_("target of %s instruction must be a label"), ifmtP);
+ break;
+ }
}
-/*****************************************************************************
- md_chars_to_number: convert from target byte order to host byte order.
-
- *************************************************************************** */
-int
-md_chars_to_number (val, n)
- unsigned char *val; /* Value in target byte order */
- int n; /* Number of bytes in the input */
+static int
+md_chars_to_number (char * val, /* Value in target byte order. */
+ int n) /* Number of bytes in the input. */
{
int retval;
for (retval = 0; n--;)
{
retval <<= 8;
- retval |= val[n];
+ retval |= (unsigned char) val[n];
}
return retval;
}
-#define MAX_LITTLENUMS 6
-#define LNUM_SIZE sizeof(LITTLENUM_TYPE)
+/* mema_to_memb: convert a MEMA-format opcode to a MEMB-format opcode.
-/*****************************************************************************
- md_atof: convert ascii to floating point
-
- Turn a string at input_line_pointer into a floating point constant of type
- 'type', and store the appropriate bytes at *litP. The number of LITTLENUMS
- emitted is returned at 'sizeP'. An error message is returned, or a pointer
- to an empty message if OK.
+ There are 2 possible MEMA formats:
+ - displacement only
+ - displacement + abase
- Note we call the i386 floating point routine, rather than complicating
- things with more files or symbolic links.
+ They are distinguished by the setting of the MEMA_ABASE bit. */
- *************************************************************************** */
-char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+static void
+mema_to_memb (char * opcodeP) /* Where to find the opcode, in target byte order. */
{
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- int prec;
- char *t;
- char *atof_ieee ();
-
- switch (type)
- {
- case 'f':
- case 'F':
- prec = 2;
- break;
+ long opcode; /* Opcode in host byte order. */
+ long mode; /* Mode bits for MEMB instruction. */
- case 'd':
- case 'D':
- prec = 4;
- break;
+ opcode = md_chars_to_number (opcodeP, 4);
+ know (!(opcode & MEMB_BIT));
- case 't':
- case 'T':
- prec = 5;
- type = 'x'; /* That's what atof_ieee() understands */
- break;
+ mode = MEMB_BIT | D_BIT;
+ if (opcode & MEMA_ABASE)
+ mode |= A_BIT;
- default:
- *sizeP = 0;
- return _("Bad call to md_atof()");
- }
+ opcode &= 0xffffc000; /* Clear MEMA offset and mode bits. */
+ opcode |= mode; /* Set MEMB mode bits. */
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- {
- input_line_pointer = t;
- }
+ md_number_to_chars (opcodeP, opcode, 4);
+}
- *sizeP = prec * LNUM_SIZE;
+/* targ_has_sfr:
- /* Output the LITTLENUMs in REVERSE order in accord with i80960
- word-order. (Dunno why atof_ieee doesn't do it in the right
- order in the first place -- probably because it's a hack of
- atof_m68k.) */
+ Return TRUE iff the target architecture supports the specified
+ special-function register (sfr). */
- for (wordP = words + prec - 1; prec--;)
+static int
+targ_has_sfr (int n) /* Number (0-31) of sfr. */
+{
+ switch (architecture)
{
- md_number_to_chars (litP, (long) (*wordP--), LNUM_SIZE);
- litP += sizeof (LITTLENUM_TYPE);
+ case ARCH_KA:
+ case ARCH_KB:
+ case ARCH_MC:
+ case ARCH_JX:
+ return 0;
+ case ARCH_HX:
+ return ((0 <= n) && (n <= 4));
+ case ARCH_CA:
+ default:
+ return ((0 <= n) && (n <= 2));
}
-
- return 0;
}
-/*****************************************************************************
- md_number_to_imm
+/* Look up a (suspected) register name in the register table and return the
+ associated register number (or -1 if not found). */
- *************************************************************************** */
-void
-md_number_to_imm (buf, val, n)
- char *buf;
- long val;
- int n;
+static int
+get_regnum (char *regname) /* Suspected register name. */
{
- md_number_to_chars (buf, val, n);
+ int *rP;
+
+ rP = (int *) hash_find (reg_hash, regname);
+ return (rP == NULL) ? -1 : *rP;
}
-/*****************************************************************************
- md_number_to_disp
+/* syntax: Issue a syntax error. */
- *************************************************************************** */
-void
-md_number_to_disp (buf, val, n)
- char *buf;
- long val;
- int n;
+static void
+syntax (void)
{
- md_number_to_chars (buf, val, n);
+ as_bad (_("syntax error"));
}
-/*****************************************************************************
- md_number_to_field:
+/* parse_regop: parse a register operand.
- Stick a value (an address fixup) into a bit field of
- previously-generated instruction.
+ In case of illegal operand, issue a message and return some valid
+ information so instruction processing can continue. */
- *************************************************************************** */
-void
-md_number_to_field (instrP, val, bfixP)
- char *instrP; /* Pointer to instruction to be fixed */
- long val; /* Address fixup value */
- bit_fixS *bfixP; /* Description of bit field to be fixed up */
+static void
+parse_regop (struct regop *regopP, /* Where to put description of register operand. */
+ char *optext, /* Text of operand. */
+ char opdesc) /* Descriptor byte: what's legal for this operand. */
{
- int numbits; /* Length of bit field to be fixed */
- long instr; /* 32-bit instruction to be fixed-up */
- long sign; /* 0 or -1, according to sign bit of 'val' */
+ int n; /* Register number. */
+ expressionS e; /* Parsed expression. */
- /* Convert instruction back to host byte order. */
- instr = md_chars_to_number (instrP, 4);
-
- /* Surprise! -- we stored the number of bits to be modified rather
- than a pointer to a structure. */
- numbits = (int) bfixP;
- if (numbits == 1)
+ /* See if operand is a register. */
+ n = get_regnum (optext);
+ if (n >= 0)
{
- /* This is a no-op, stuck here by reloc_callj() */
- return;
- }
+ if (IS_RG_REG (n))
+ {
+ /* Global or local register. */
+ if (!REG_ALIGN (opdesc, n))
+ as_bad (_("unaligned register"));
- know ((numbits == 13) || (numbits == 24));
+ regopP->n = n;
+ regopP->mode = 0;
+ regopP->special = 0;
+ return;
+ }
+ else if (IS_FP_REG (n) && FP_OK (opdesc))
+ {
+ /* Floating point register, and it's allowed. */
+ regopP->n = n - FP0;
+ regopP->mode = 1;
+ regopP->special = 0;
+ return;
+ }
+ else if (IS_SF_REG (n) && SFR_OK (opdesc))
+ {
+ /* Special-function register, and it's allowed. */
+ regopP->n = n - SF0;
+ regopP->mode = 0;
+ regopP->special = 1;
+ if (!targ_has_sfr (regopP->n))
+ as_bad (_("no such sfr in this architecture"));
- /* Propagate sign bit of 'val' for the given number of bits. Result
- should be all 0 or all 1. */
- sign = val >> ((int) numbits - 1);
- if (((val < 0) && (sign != -1))
- || ((val > 0) && (sign != 0)))
- {
- as_bad (_("Fixup of %ld too large for field width of %d"),
- val, numbits);
- }
- else
- {
- /* Put bit field into instruction and write back in target
- * byte order.
- */
- val &= ~(-1 << (int) numbits); /* Clear unused sign bits */
- instr |= val;
- md_number_to_chars (instrP, instr, 4);
+ return;
+ }
}
-} /* md_number_to_field() */
-\f
-
-/*****************************************************************************
- md_parse_option
- Invocation line includes a switch not recognized by the base assembler.
- See if it's a processor-specific option. For the 960, these are:
-
- -norelax:
- Conditional branch instructions that require displacements
- greater than 13 bits (or that have external targets) should
- generate errors. The default is to replace each such
- instruction with the corresponding compare (or chkbit) and
- branch instructions. Note that the Intel "j" cobr directives
- are ALWAYS "de-optimized" in this way when necessary,
- regardless of the setting of this option.
-
- -b:
- Add code to collect information about branches taken, for
- later optimization of branch prediction bits by a separate
- tool. COBR and CNTL format instructions have branch
- prediction bits (in the CX architecture); if "BR" represents
- an instruction in one of these classes, the following rep-
- resents the code generated by the assembler:
-
- call <increment routine>
- .word 0 # pre-counter
- Label: BR
- call <increment routine>
- .word 0 # post-counter
-
- A table of all such "Labels" is also generated.
-
- -AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA:
- Select the 80960 architecture. Instructions or features not
- supported by the selected architecture cause fatal errors.
- The default is to generate code for any instruction or feature
- that is supported by SOME version of the 960 (even if this
- means mixing architectures!).
-
- ****************************************************************************/
-
-CONST char *md_shortopts = "A:b";
-struct option md_longopts[] =
-{
-#define OPTION_LINKRELAX (OPTION_MD_BASE)
- {"linkrelax", no_argument, NULL, OPTION_LINKRELAX},
- {"link-relax", no_argument, NULL, OPTION_LINKRELAX},
-#define OPTION_NORELAX (OPTION_MD_BASE + 1)
- {"norelax", no_argument, NULL, OPTION_NORELAX},
- {"no-relax", no_argument, NULL, OPTION_NORELAX},
- {NULL, no_argument, NULL, 0}
-};
-size_t md_longopts_size = sizeof (md_longopts);
-
-struct tabentry
- {
- char *flag;
- int arch;
- };
-static const struct tabentry arch_tab[] =
-{
- {"KA", ARCH_KA},
- {"KB", ARCH_KB},
- {"SA", ARCH_KA}, /* Synonym for KA */
- {"SB", ARCH_KB}, /* Synonym for KB */
- {"KC", ARCH_MC}, /* Synonym for MC */
- {"MC", ARCH_MC},
- {"CA", ARCH_CA},
- {"JX", ARCH_JX},
- {"HX", ARCH_HX},
- {NULL, 0}
-};
-
-int
-md_parse_option (c, arg)
- int c;
- char *arg;
-{
- switch (c)
+ else if (LIT_OK (opdesc))
{
- case OPTION_LINKRELAX:
- linkrelax = 1;
- flag_keep_locals = 1;
- break;
-
- case OPTION_NORELAX:
- norelax = 1;
- break;
-
- case 'b':
- instrument_branches = 1;
- break;
-
- case 'A':
- {
- const struct tabentry *tp;
- char *p = arg;
-
- for (tp = arch_tab; tp->flag != NULL; tp++)
- if (!strcmp (p, tp->flag))
- break;
+ /* How about a literal? */
+ regopP->mode = 1;
+ regopP->special = 0;
+ if (FP_OK (opdesc))
+ {
+ /* Floating point literal acceptable. */
+ /* Skip over 0f, 0d, or 0e prefix. */
+ if ((optext[0] == '0')
+ && (optext[1] >= 'd')
+ && (optext[1] <= 'f'))
+ optext += 2;
- if (tp->flag == NULL)
- {
- as_bad (_("invalid architecture %s"), p);
- return 0;
- }
- else
- architecture = tp->arch;
- }
- break;
+ if (!strcmp (optext, "0.0") || !strcmp (optext, "0"))
+ {
+ regopP->n = 0x10;
+ return;
+ }
- default:
- return 0;
+ if (!strcmp (optext, "1.0") || !strcmp (optext, "1"))
+ {
+ regopP->n = 0x16;
+ return;
+ }
+ }
+ else
+ {
+ /* Fixed point literal acceptable. */
+ parse_expr (optext, &e);
+ if (e.X_op != O_constant
+ || (offs (e) < 0) || (offs (e) > 31))
+ {
+ as_bad (_("illegal literal"));
+ offs (e) = 0;
+ }
+ regopP->n = offs (e);
+ return;
+ }
}
- return 1;
+ /* Nothing worked. */
+ syntax ();
+ regopP->mode = 0; /* Register r0 is always a good one. */
+ regopP->n = 0;
+ regopP->special = 0;
}
-void
-md_show_usage (stream)
- FILE *stream;
-{
- int i;
- fprintf (stream, _("I960 options:\n"));
- for (i = 0; arch_tab[i].flag; i++)
- fprintf (stream, "%s-A%s", i ? " | " : "", arch_tab[i].flag);
- fprintf (stream, _("\n\
- specify variant of 960 architecture\n\
--b add code to collect statistics about branches taken\n\
--link-relax preserve individual alignment directives so linker\n\
- can do relaxing (b.out format only)\n\
--no-relax don't alter compare-and-branch instructions for\n\
- long displacements\n"));
-}
-\f
+/* get_ispec: parse a memory operand for an index specification
-/*****************************************************************************
- md_convert_frag:
- Called by base assembler after address relaxation is finished: modify
- variable fragments according to how much relaxation was done.
+ Here, an "index specification" is taken to be anything surrounded
+ by square brackets and NOT followed by anything else.
- If the fragment substate is still 1, a 13-bit displacement was enough
- to reach the symbol in question. Set up an address fixup, but otherwise
- leave the cobr instruction alone.
+ If it's found, detach it from the input string, remove the surrounding
+ square brackets, and return a pointer to it. Otherwise, return NULL. */
- If the fragment substate is 2, a 13-bit displacement was not enough.
- Replace the cobr with a two instructions (a compare and a branch).
+static char *
+get_ispec (char *textP) /* Pointer to memory operand from source instruction, no white space. */
- *************************************************************************** */
-#ifndef BFD_ASSEMBLER
-void
-md_convert_frag (headers, seg, fragP)
- object_headers *headers;
- segT seg;
- fragS *fragP;
-#else
-void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd;
- segT sec;
- fragS *fragP;
-#endif
{
- fixS *fixP; /* Structure describing needed address fix */
+ /* Points to start of index specification. */
+ char *start;
+ /* Points to end of index specification. */
+ char *end;
- switch (fragP->fr_subtype)
+ /* Find opening square bracket, if any. */
+ start = strchr (textP, '[');
+
+ if (start != NULL)
{
- case 1:
- /* LEAVE SINGLE COBR INSTRUCTION */
- fixP = fix_new (fragP,
- fragP->fr_opcode - fragP->fr_literal,
- 4,
- fragP->fr_symbol,
- fragP->fr_offset,
- 1,
- NO_RELOC);
+ /* Eliminate '[', detach from rest of operand. */
+ *start++ = '\0';
- fixP->fx_bit_fixP = (bit_fixS *) 13; /* size of bit field */
- break;
- case 2:
- /* REPLACE COBR WITH COMPARE/BRANCH INSTRUCTIONS */
- relax_cobr (fragP);
- break;
- default:
- BAD_CASE (fragP->fr_subtype);
- break;
+ end = strchr (start, ']');
+
+ if (end == NULL)
+ as_bad (_("unmatched '['"));
+ else
+ {
+ /* Eliminate ']' and make sure it was the last thing
+ in the string. */
+ *end = '\0';
+ if (*(end + 1) != '\0')
+ as_bad (_("garbage after index spec ignored"));
+ }
}
+ return start;
}
-/*****************************************************************************
- md_estimate_size_before_relax: How much does it look like *fragP will grow?
+/* parse_memop: parse a memory operand
- Called by base assembler just before address relaxation.
- Return the amount by which the fragment will grow.
+ This routine is based on the observation that the 4 mode bits of the
+ MEMB format, taken individually, have fairly consistent meaning:
- Any symbol that is now undefined will not become defined; cobr's
- based on undefined symbols will have to be replaced with a compare
- instruction and a branch instruction, and the code fragment will grow
- by 4 bytes.
+ M3 (bit 13): 1 if displacement is present (D_BIT)
+ M2 (bit 12): 1 for MEMB instructions (MEMB_BIT)
+ M1 (bit 11): 1 if index is present (I_BIT)
+ M0 (bit 10): 1 if abase is present (A_BIT)
- *************************************************************************** */
-int
-md_estimate_size_before_relax (fragP, segment_type)
- register fragS *fragP;
- register segT segment_type;
-{
- /* If symbol is undefined in this segment, go to "relaxed" state
- (compare and branch instructions instead of cobr) right now. */
- if (S_GET_SEGMENT (fragP->fr_symbol) != segment_type)
- {
- relax_cobr (fragP);
- return 4;
- }
- return 0;
-} /* md_estimate_size_before_relax() */
+ So we parse the memory operand and set bits in the mode as we find
+ things. Then at the end, if we go to MEMB format, we need only set
+ the MEMB bit (M2) and our mode is built for us.
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+ Unfortunately, I said "fairly consistent". The exceptions:
-/*****************************************************************************
- md_ri_to_chars:
- This routine exists in order to overcome machine byte-order problems
- when dealing with bit-field entries in the relocation_info struct.
+ DBIA
+ 0100 Would seem illegal, but means "abase-only".
- But relocation info will be used on the host machine only (only
- executable code is actually downloaded to the i80960). Therefore,
- we leave it in host byte order.
+ 0101 Would seem to mean "abase-only" -- it means IP-relative.
+ Must be converted to 0100.
- The above comment is no longer true. This routine now really
- does do the reordering (Ian Taylor 28 Aug 92).
+ 0110 Would seem to mean "index-only", but is reserved.
+ We turn on the D bit and provide a 0 displacement.
- *************************************************************************** */
+ The other thing to observe is that we parse from the right, peeling
+ things * off as we go: first any index spec, then any abase, then
+ the displacement. */
static void
-md_ri_to_chars (where, ri)
- char *where;
- struct relocation_info *ri;
-{
- md_number_to_chars (where, ri->r_address,
- sizeof (ri->r_address));
- where[4] = ri->r_index & 0x0ff;
- where[5] = (ri->r_index >> 8) & 0x0ff;
- where[6] = (ri->r_index >> 16) & 0x0ff;
- where[7] = ((ri->r_pcrel << 0)
- | (ri->r_length << 1)
- | (ri->r_extern << 3)
- | (ri->r_bsr << 4)
- | (ri->r_disp << 5)
- | (ri->r_callj << 6));
-}
-
-#endif /* defined(OBJ_AOUT) | defined(OBJ_BOUT) */
-
-\f
-/* FOLLOWING ARE THE LOCAL ROUTINES, IN ALPHABETICAL ORDER */
-
-/*****************************************************************************
- brcnt_emit: Emit code to increment inline branch counter.
+parse_memop (memS *memP, /* Where to put the results. */
+ char *argP, /* Text of the operand to be parsed. */
+ int optype) /* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16. */
+{
+ char *indexP; /* Pointer to index specification with "[]" removed. */
+ char *p; /* Temp char pointer. */
+ char iprel_flag; /* True if this is an IP-relative operand. */
+ int regnum; /* Register number. */
+ /* Scale factor: 1,2,4,8, or 16. Later converted to internal format
+ (0,1,2,3,4 respectively). */
+ int scale;
+ int mode; /* MEMB mode bits. */
+ int *intP; /* Pointer to register number. */
- See the comments above the declaration of 'br_cnt' for details on
- branch-prediction instrumentation.
- *************************************************************************** */
-static void
-brcnt_emit ()
-{
- ctrl_fmt (BR_CNT_FUNC, CALL, 1); /* Emit call to "increment" routine */
- emit (0); /* Emit inline counter to be incremented */
-}
+ /* The following table contains the default scale factors for each
+ type of memory instruction. It is accessed using (optype-MEM1)
+ as an index -- thus it assumes the 'optype' constants are
+ assigned consecutive values, in the order they appear in this
+ table. */
+ static const int def_scale[] =
+ {
+ 1, /* MEM1 */
+ 2, /* MEM2 */
+ 4, /* MEM4 */
+ 8, /* MEM8 */
+ -1, /* MEM12 -- no valid default */
+ 16 /* MEM16 */
+ };
-/*****************************************************************************
- brlab_next: generate the next branch local label
+ iprel_flag = mode = 0;
- See the comments above the declaration of 'br_cnt' for details on
- branch-prediction instrumentation.
- *************************************************************************** */
-static char *
-brlab_next ()
-{
- static char buf[20];
+ /* Any index present? */
+ indexP = get_ispec (argP);
+ if (indexP)
+ {
+ p = strchr (indexP, '*');
+ if (p == NULL)
+ {
+ /* No explicit scale -- use default for this instruction
+ type and assembler mode. */
+ if (flag_mri)
+ scale = 1;
+ else
+ /* GNU960 compatibility */
+ scale = def_scale[optype - MEM1];
+ }
+ else
+ {
+ *p++ = '\0'; /* Eliminate '*' */
- sprintf (buf, "%s%d", BR_LABEL_BASE, br_cnt++);
- return buf;
-}
+ /* Now indexP->a '\0'-terminated register name,
+ and p->a scale factor. */
-/*****************************************************************************
- brtab_emit: generate the fetch-prediction branch table.
+ if (!strcmp (p, "16"))
+ scale = 16;
+ else if (strchr ("1248", *p) && (p[1] == '\0'))
+ scale = *p - '0';
+ else
+ scale = -1;
+ }
- See the comments above the declaration of 'br_cnt' for details on
- branch-prediction instrumentation.
+ regnum = get_regnum (indexP); /* Get index reg. # */
+ if (!IS_RG_REG (regnum))
+ {
+ as_bad (_("invalid index register"));
+ return;
+ }
- The code emitted here would be functionally equivalent to the following
- example assembler source.
+ /* Convert scale to its binary encoding. */
+ switch (scale)
+ {
+ case 1:
+ scale = 0 << 7;
+ break;
+ case 2:
+ scale = 1 << 7;
+ break;
+ case 4:
+ scale = 2 << 7;
+ break;
+ case 8:
+ scale = 3 << 7;
+ break;
+ case 16:
+ scale = 4 << 7;
+ break;
+ default:
+ as_bad (_("invalid scale factor"));
+ return;
+ };
- .data
- .align 2
- BR_TAB_NAME:
- .word 0 # link to next table
- .word 3 # length of table
- .word LBRANCH0 # 1st entry in table proper
- .word LBRANCH1
- .word LBRANCH2
- **************************************************************************** */
-void
-brtab_emit ()
-{
- int i;
- char buf[20];
- char *p; /* Where the binary was output to */
- /* Pointer to description of deferred address fixup. */
- fixS *fixP;
+ memP->opcode |= scale | regnum; /* Set index bits in opcode. */
+ mode |= I_BIT; /* Found a valid index spec. */
+ }
- if (!instrument_branches)
+ /* Any abase (Register Indirect) specification present? */
+ if ((p = strrchr (argP, '(')) != NULL)
{
- return;
+ /* "(" is there -- does it start a legal abase spec? If not, it
+ could be part of a displacement expression. */
+ intP = (int *) hash_find (areg_hash, p);
+ if (intP != NULL)
+ {
+ /* Got an abase here. */
+ regnum = *intP;
+ *p = '\0'; /* Discard register spec. */
+ if (regnum == IPREL)
+ /* We have to specialcase ip-rel mode. */
+ iprel_flag = 1;
+ else
+ {
+ memP->opcode |= regnum << 14;
+ mode |= A_BIT;
+ }
+ }
}
- subseg_set (data_section, 0); /* .data */
- frag_align (2, 0, 0); /* .align 2 */
- record_alignment (now_seg, 2);
- colon (BR_TAB_NAME); /* BR_TAB_NAME: */
- emit (0); /* .word 0 #link to next table */
- emit (br_cnt); /* .word n #length of table */
+ /* Any expression present? */
+ memP->e = argP;
+ if (*argP != '\0')
+ mode |= D_BIT;
- for (i = 0; i < br_cnt; i++)
+ /* Special-case ip-relative addressing. */
+ if (iprel_flag)
{
- sprintf (buf, "%s%d", BR_LABEL_BASE, i);
- p = emit (0);
- fixP = fix_new (frag_now,
- p - frag_now->fr_literal,
- 4,
- symbol_find (buf),
- 0,
- 0,
- NO_RELOC);
+ if (mode & I_BIT)
+ syntax ();
+ else
+ {
+ memP->opcode |= 5 << 10; /* IP-relative mode. */
+ memP->disp = 32;
+ }
+ return;
}
-}
-/*****************************************************************************
- cobr_fmt: generate a COBR-format instruction
+ /* Handle all other modes. */
+ switch (mode)
+ {
+ case D_BIT | A_BIT:
+ /* Go with MEMA instruction format for now (grow to MEMB later
+ if 12 bits is not enough for the displacement). MEMA format
+ has a single mode bit: set it to indicate that abase is
+ present. */
+ memP->opcode |= MEMA_ABASE;
+ memP->disp = 12;
+ break;
- *************************************************************************** */
-static
-void
-cobr_fmt (arg, opcode, oP)
- /* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */
- char *arg[];
- /* Opcode, with branch-prediction bits already set if necessary. */
- long opcode;
- /* Pointer to description of instruction. */
- struct i960_opcode *oP;
-{
- long instr; /* 32-bit instruction */
- struct regop regop; /* Description of register operand */
- int n; /* Number of operands */
- int var_frag; /* 1 if varying length code fragment should
- * be emitted; 0 if an address fix
- * should be emitted.
- */
+ case D_BIT:
+ /* Go with MEMA instruction format for now (grow to MEMB later
+ if 12 bits is not enough for the displacement). */
+ memP->disp = 12;
+ break;
- instr = opcode;
- n = oP->num_ops;
+ case A_BIT:
+ /* For some reason, the bit string for this mode is not
+ consistent: it should be 0 (exclusive of the MEMB bit), so we
+ set it "by hand" here. */
+ memP->opcode |= MEMB_BIT;
+ break;
- if (n >= 1)
- {
- /* First operand (if any) of a COBR is always a register
- operand. Parse it. */
- parse_regop (®op, arg[1], oP->operand[0]);
- instr |= (regop.n << 19) | (regop.mode << 13);
- }
- if (n >= 2)
- {
- /* Second operand (if any) of a COBR is always a register
- operand. Parse it. */
- parse_regop (®op, arg[2], oP->operand[1]);
- instr |= (regop.n << 14) | regop.special;
- }
+ case A_BIT | I_BIT:
+ /* set MEMB bit in mode, and OR in mode bits. */
+ memP->opcode |= mode | MEMB_BIT;
+ break;
- if (n < 3)
- {
- emit (instr);
+ case I_BIT:
+ /* Treat missing displacement as displacement of 0. */
+ mode |= D_BIT;
+ /* Fall into next case. */
+ case D_BIT | A_BIT | I_BIT:
+ case D_BIT | I_BIT:
+ /* Set MEMB bit in mode, and OR in mode bits. */
+ memP->opcode |= mode | MEMB_BIT;
+ memP->disp = 32;
+ break;
+ default:
+ syntax ();
+ break;
}
- else
- {
- if (instrument_branches)
- {
- brcnt_emit ();
- colon (brlab_next ());
- }
+}
- /* A third operand to a COBR is always a displacement. Parse
- it; if it's relaxable (a cobr "j" directive, or any cobr
- other than bbs/bbc when the "-norelax" option is not in use)
- set up a variable code fragment; otherwise set up an address
- fix. */
- var_frag = !norelax || (oP->format == COJ); /* TRUE or FALSE */
- get_cdisp (arg[3], "COBR", instr, 13, var_frag, 0);
+/* Generate a MEMA- or MEMB-format instruction. */
- if (instrument_branches)
- {
- brcnt_emit ();
- }
- }
-} /* cobr_fmt() */
+static void
+mem_fmt (char *args[], /* args[0]->opcode mnemonic, args[1-3]->operands. */
+ struct i960_opcode *oP,/* Pointer to description of instruction. */
+ int callx) /* Is this a callx opcode. */
+{
+ int i; /* Loop counter. */
+ struct regop regop; /* Description of register operand. */
+ char opdesc; /* Operand descriptor byte. */
+ memS instr; /* Description of binary to be output. */
+ char *outP; /* Where the binary was output to. */
+ expressionS exp; /* Parsed expression. */
+ /* ->description of deferred address fixup. */
+ fixS *fixP;
-/*****************************************************************************
- ctrl_fmt: generate a CTRL-format instruction
+#ifdef OBJ_COFF
+ /* COFF support isn't in place yet for callx relaxing. */
+ callx = 0;
+#endif
- *************************************************************************** */
-static
-void
-ctrl_fmt (targP, opcode, num_ops)
- char *targP; /* Pointer to text of lone operand (if any) */
- long opcode; /* Template of instruction */
- int num_ops; /* Number of operands */
-{
- int instrument; /* TRUE iff we should add instrumentation to track
- * how often the branch is taken
- */
+ memset (&instr, '\0', sizeof (memS));
+ instr.opcode = oP->opcode;
- if (num_ops == 0)
- {
- emit (opcode); /* Output opcode */
- }
- else
+ /* Process operands. */
+ for (i = 1; i <= oP->num_ops; i++)
{
+ opdesc = oP->operand[i - 1];
- instrument = instrument_branches && (opcode != CALL)
- && (opcode != B) && (opcode != RET) && (opcode != BAL);
-
- if (instrument)
- {
- brcnt_emit ();
- colon (brlab_next ());
- }
-
- /* The operand MUST be an ip-relative displacment. Parse it
- * and set up address fix for the instruction we just output.
- */
- get_cdisp (targP, "CTRL", opcode, 24, 0, 0);
-
- if (instrument)
+ if (MEMOP (opdesc))
+ parse_memop (&instr, args[i], oP->format);
+ else
{
- brcnt_emit ();
+ parse_regop (®op, args[i], opdesc);
+ instr.opcode |= regop.n << 19;
}
}
-}
-
-/*****************************************************************************
- emit: output instruction binary
+ /* Parse the displacement; this must be done before emitting the
+ opcode, in case it is an expression using `.'. */
+ parse_expr (instr.e, &exp);
- Output instruction binary, in target byte order, 4 bytes at a time.
- Return pointer to where it was placed.
+ /* Output opcode. */
+ outP = emit (instr.opcode);
- *************************************************************************** */
-static
-char *
-emit (instr)
- long instr; /* Word to be output, host byte order */
-{
- char *toP; /* Where to output it */
+ if (instr.disp == 0)
+ return;
- toP = frag_more (4); /* Allocate storage */
- md_number_to_chars (toP, instr, 4); /* Convert to target byte order */
- return toP;
-}
+ /* Process the displacement. */
+ switch (exp.X_op)
+ {
+ case O_illegal:
+ as_bad (_("expression syntax error"));
+ break;
-/*****************************************************************************
- get_args: break individual arguments out of comma-separated list
+ case O_constant:
+ if (instr.disp == 32)
+ (void) emit (offs (exp)); /* Output displacement. */
+ else
+ {
+ /* 12-bit displacement. */
+ if (offs (exp) & ~0xfff)
+ {
+ /* Won't fit in 12 bits: convert already-output
+ instruction to MEMB format, output
+ displacement. */
+ mema_to_memb (outP);
+ (void) emit (offs (exp));
+ }
+ else
+ {
+ /* WILL fit in 12 bits: OR into opcode and
+ overwrite the binary we already put out. */
+ instr.opcode |= offs (exp);
+ md_number_to_chars (outP, instr.opcode, 4);
+ }
+ }
+ break;
- Input assumptions:
- - all comments and labels have been removed
- - all strings of whitespace have been collapsed to a single blank.
- - all character constants ('x') have been replaced with decimal
+ default:
+ if (instr.disp == 12)
+ /* Displacement is dependent on a symbol, whose value
+ may change at link time. We HAVE to reserve 32 bits.
+ Convert already-output opcode to MEMB format. */
+ mema_to_memb (outP);
- Output:
- args[0] is untouched. args[1] points to first operand, etc. All args:
- - are NULL-terminated
- - contain no whitespace
+ /* Output 0 displacement and set up address fixup for when
+ this symbol's value becomes known. */
+ outP = emit ((long) 0);
+ fixP = fix_new_exp (frag_now,
+ outP - frag_now->fr_literal,
+ 4, &exp, 0, NO_RELOC);
+ /* Steve's linker relaxing hack. Mark this 32-bit relocation as
+ being in the instruction stream, specifically as part of a callx
+ instruction. */
+ fixP->fx_bsr = callx;
+ break;
+ }
+}
- Return value:
- Number of operands (0,1,2, or 3) or -1 on error.
+/* targ_has_iclass:
+
+ Return TRUE iff the target architecture supports the indicated
+ class of instructions. */
- *************************************************************************** */
static int
-get_args (p, args)
- /* Pointer to comma-separated operands; MUCKED BY US */
- register char *p;
- /* Output arg: pointers to operands placed in args[1-3]. MUST
- ACCOMMODATE 4 ENTRIES (args[0-3]). */
- char *args[];
+targ_has_iclass (int ic) /* Instruction class; one of:
+ I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM, I_CX2, I_HX, I_HX2. */
{
- register int n; /* Number of operands */
- register char *to;
+ iclasses_seen |= ic;
- /* Skip lead white space */
- while (*p == ' ')
+ switch (architecture)
{
- p++;
+ case ARCH_KA:
+ return ic & (I_BASE | I_KX);
+ case ARCH_KB:
+ return ic & (I_BASE | I_KX | I_FP | I_DEC);
+ case ARCH_MC:
+ return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL);
+ case ARCH_CA:
+ return ic & (I_BASE | I_CX | I_CX2 | I_CASIM);
+ case ARCH_JX:
+ return ic & (I_BASE | I_CX2 | I_JX);
+ case ARCH_HX:
+ return ic & (I_BASE | I_CX2 | I_JX | I_HX);
+ default:
+ if ((iclasses_seen & (I_KX | I_FP | I_DEC | I_MIL))
+ && (iclasses_seen & (I_CX | I_CX2)))
+ {
+ as_warn (_("architecture of opcode conflicts with that of earlier instruction(s)"));
+ iclasses_seen &= ~ic;
+ }
+ return 1;
}
+}
- if (*p == '\0')
- {
- return 0;
- }
+/* shift_ok:
+ Determine if a "shlo" instruction can be used to implement a "ldconst".
+ This means that some number X < 32 can be shifted left to produce the
+ constant of interest.
- n = 1;
- args[1] = p;
+ Return the shift count, or 0 if we can't do it.
+ Caller calculates X by shifting original constant right 'shift' places. */
- /* Squeze blanks out by moving non-blanks toward start of string.
- * Isolate operands, whenever comma is found.
- */
- to = p;
- while (*p != '\0')
- {
+static int
+shift_ok (int n) /* The constant of interest. */
+{
+ int shift; /* The shift count. */
- if (*p == ' '
- && (! isalnum ((unsigned char) p[1])
- || ! isalnum ((unsigned char) p[-1])))
- {
- p++;
+ if (n <= 0)
+ /* Can't do it for negative numbers. */
+ return 0;
- }
- else if (*p == ',')
- {
+ /* Shift 'n' right until a 1 is about to be lost. */
+ for (shift = 0; (n & 1) == 0; shift++)
+ n >>= 1;
- /* Start of operand */
- if (n == 3)
- {
- as_bad (_("too many operands"));
- return -1;
- }
- *to++ = '\0'; /* Terminate argument */
- args[++n] = to; /* Start next argument */
- p++;
+ if (n >= 32)
+ return 0;
- }
- else
- {
- *to++ = *p++;
- }
- }
- *to = '\0';
- return n;
+ return shift;
}
-/*****************************************************************************
- get_cdisp: handle displacement for a COBR or CTRL instruction.
+/* parse_ldcont:
+ Parse and replace a 'ldconst' pseudo-instruction with an appropriate
+ i80960 instruction.
- Parse displacement for a COBR or CTRL instruction.
+ Assumes the input consists of:
+ arg[0] opcode mnemonic ('ldconst')
+ arg[1] first operand (constant)
+ arg[2] name of register to be loaded
- If successful, output the instruction opcode and set up for it,
- depending on the arg 'var_frag', either:
- o an address fixup to be done when all symbol values are known, or
- o a varying length code fragment, with address fixup info. This
- will be done for cobr instructions that may have to be relaxed
- in to compare/branch instructions (8 bytes) if the final
- address displacement is greater than 13 bits.
+ Replaces opcode and/or operands as appropriate.
- ****************************************************************************/
-static
-void
-get_cdisp (dispP, ifmtP, instr, numbits, var_frag, callj)
- /* displacement as specified in source instruction */
- char *dispP;
- /* "COBR" or "CTRL" (for use in error message) */
- char *ifmtP;
- /* Instruction needing the displacement */
- long instr;
- /* # bits of displacement (13 for COBR, 24 for CTRL) */
- int numbits;
- /* 1 if varying length code fragment should be emitted;
- * 0 if an address fix should be emitted.
- */
- int var_frag;
- /* 1 if callj relocation should be done; else 0 */
- int callj;
+ Returns the new number of arguments, or -1 on failure. */
+
+static int
+parse_ldconst (char *arg[]) /* See above. */
{
- expressionS e; /* Parsed expression */
- fixS *fixP; /* Structure describing needed address fix */
- char *outP; /* Where instruction binary is output to */
+ int n; /* Constant to be loaded. */
+ int shift; /* Shift count for "shlo" instruction. */
+ static char buf[5]; /* Literal for first operand. */
+ static char buf2[5]; /* Literal for second operand. */
+ expressionS e; /* Parsed expression. */
- fixP = NULL;
+ arg[3] = NULL; /* So we can tell at the end if it got used or not. */
- parse_expr (dispP, &e);
+ parse_expr (arg[1], &e);
switch (e.X_op)
{
- case O_illegal:
- as_bad (_("expression syntax error"));
+ default:
+ /* We're dependent on one or more symbols -- use "lda". */
+ arg[0] = "lda";
+ break;
- case O_symbol:
- if (S_GET_SEGMENT (e.X_add_symbol) == now_seg
- || S_GET_SEGMENT (e.X_add_symbol) == undefined_section)
+ case O_constant:
+ /* Try the following mappings:
+ ldconst 0,<reg> -> mov 0,<reg>
+ ldconst 31,<reg> -> mov 31,<reg>
+ ldconst 32,<reg> -> addo 1,31,<reg>
+ ldconst 62,<reg> -> addo 31,31,<reg>
+ ldconst 64,<reg> -> shlo 8,3,<reg>
+ ldconst -1,<reg> -> subo 1,0,<reg>
+ ldconst -31,<reg> -> subo 31,0,<reg>
+
+ Anything else becomes:
+ lda xxx,<reg>. */
+ n = offs (e);
+ if ((0 <= n) && (n <= 31))
+ arg[0] = "mov";
+ else if ((-31 <= n) && (n <= -1))
{
- if (var_frag)
- {
- outP = frag_more (8); /* Allocate worst-case storage */
- md_number_to_chars (outP, instr, 4);
- frag_variant (rs_machine_dependent, 4, 4, 1,
- adds (e), offs (e), outP);
- }
- else
- {
- /* Set up a new fix structure, so address can be updated
- * when all symbol values are known.
- */
- outP = emit (instr);
- fixP = fix_new (frag_now,
- outP - frag_now->fr_literal,
- 4,
- adds (e),
- offs (e),
- 1,
- NO_RELOC);
-
- fixP->fx_tcbit = callj;
-
- /* We want to modify a bit field when the address is
- * known. But we don't need all the garbage in the
- * bit_fix structure. So we're going to lie and store
- * the number of bits affected instead of a pointer.
- */
- fixP->fx_bit_fixP = (bit_fixS *) numbits;
- }
+ arg[0] = "subo";
+ arg[3] = arg[2];
+ sprintf (buf, "%d", -n);
+ arg[1] = buf;
+ arg[2] = "0";
+ }
+ else if ((32 <= n) && (n <= 62))
+ {
+ arg[0] = "addo";
+ arg[3] = arg[2];
+ arg[1] = "31";
+ sprintf (buf, "%d", n - 31);
+ arg[2] = buf;
+ }
+ else if ((shift = shift_ok (n)) != 0)
+ {
+ arg[0] = "shlo";
+ arg[3] = arg[2];
+ sprintf (buf, "%d", shift);
+ arg[1] = buf;
+ sprintf (buf2, "%d", n >> shift);
+ arg[2] = buf2;
}
else
- as_bad (_("attempt to branch into different segment"));
+ arg[0] = "lda";
break;
- default:
- as_bad (_("target of %s instruction must be a label"), ifmtP);
+ case O_illegal:
+ as_bad (_("invalid constant"));
+ return -1;
break;
}
+ return (arg[3] == 0) ? 2 : 3;
}
-/*****************************************************************************
- get_ispec: parse a memory operand for an index specification
-
- Here, an "index specification" is taken to be anything surrounded
- by square brackets and NOT followed by anything else.
+/* reg_fmt: generate a REG-format instruction. */
- If it's found, detach it from the input string, remove the surrounding
- square brackets, and return a pointer to it. Otherwise, return NULL.
-
- *************************************************************************** */
-static
-char *
-get_ispec (textP)
- /* Pointer to memory operand from source instruction, no white space. */
- char *textP;
+static void
+reg_fmt (char *args[], /* args[0]->opcode mnemonic, args[1-3]->operands. */
+ struct i960_opcode *oP)/* Pointer to description of instruction. */
{
- /* Points to start of index specification. */
- char *start;
- /* Points to end of index specification. */
- char *end;
+ long instr; /* Binary to be output. */
+ struct regop regop; /* Description of register operand. */
+ int n_ops; /* Number of operands. */
- /* Find opening square bracket, if any. */
- start = strchr (textP, '[');
+ instr = oP->opcode;
+ n_ops = oP->num_ops;
- if (start != NULL)
+ if (n_ops >= 1)
{
+ parse_regop (®op, args[1], oP->operand[0]);
- /* Eliminate '[', detach from rest of operand */
- *start++ = '\0';
-
- end = strchr (start, ']');
-
- if (end == NULL)
+ if ((n_ops == 1) && !(instr & M3))
{
- as_bad (_("unmatched '['"));
-
+ /* 1-operand instruction in which the dst field should
+ be used (instead of src1). */
+ regop.n <<= 19;
+ if (regop.special)
+ regop.mode = regop.special;
+ regop.mode <<= 13;
+ regop.special = 0;
}
else
{
- /* Eliminate ']' and make sure it was the last thing
- * in the string.
- */
- *end = '\0';
- if (*(end + 1) != '\0')
- {
- as_bad (_("garbage after index spec ignored"));
- }
+ /* regop.n goes in bit 0, needs no shifting. */
+ regop.mode <<= 11;
+ regop.special <<= 5;
}
+ instr |= regop.n | regop.mode | regop.special;
}
- return start;
-}
-/*****************************************************************************
- get_regnum:
-
- Look up a (suspected) register name in the register table and return the
- associated register number (or -1 if not found).
-
- *************************************************************************** */
-static
-int
-get_regnum (regname)
- char *regname; /* Suspected register name */
-{
- int *rP;
+ if (n_ops >= 2)
+ {
+ parse_regop (®op, args[2], oP->operand[1]);
- rP = (int *) hash_find (reg_hash, regname);
- return (rP == NULL) ? -1 : *rP;
+ if ((n_ops == 2) && !(instr & M3))
+ {
+ /* 2-operand instruction in which the dst field should
+ be used instead of src2). */
+ regop.n <<= 19;
+ if (regop.special)
+ regop.mode = regop.special;
+ regop.mode <<= 13;
+ regop.special = 0;
+ }
+ else
+ {
+ regop.n <<= 14;
+ regop.mode <<= 12;
+ regop.special <<= 6;
+ }
+ instr |= regop.n | regop.mode | regop.special;
+ }
+ if (n_ops == 3)
+ {
+ parse_regop (®op, args[3], oP->operand[2]);
+ if (regop.special)
+ regop.mode = regop.special;
+ instr |= (regop.n <<= 19) | (regop.mode <<= 13);
+ }
+ emit (instr);
}
-/*****************************************************************************
- i_scan: perform lexical scan of ascii assembler instruction.
+/* get_args: break individual arguments out of comma-separated list
Input assumptions:
- - input string is an i80960 instruction (not a pseudo-op)
- all comments and labels have been removed
- all strings of whitespace have been collapsed to a single blank.
+ - all character constants ('x') have been replaced with decimal
Output:
- args[0] points to opcode, other entries point to operands. All strings:
+ args[0] is untouched. args[1] points to first operand, etc. All args:
- are NULL-terminated
- contain no whitespace
- - have character constants ('x') replaced with a decimal number
Return value:
- Number of operands (0,1,2, or 3) or -1 on error.
+ Number of operands (0,1,2, or 3) or -1 on error. */
- *************************************************************************** */
static int
-i_scan (iP, args)
- /* Pointer to ascii instruction; MUCKED BY US. */
- register char *iP;
- /* Output arg: pointers to opcode and operands placed here. MUST
- ACCOMMODATE 4 ENTRIES. */
- char *args[];
+get_args (char *p, /* Pointer to comma-separated operands; Mucked by us. */
+ char *args[]) /* Output arg: pointers to operands placed in args[1-3].
+ Must accommodate 4 entries (args[0-3]). */
+
{
+ int n; /* Number of operands. */
+ char *to;
- /* Isolate opcode */
- if (*(iP) == ' ')
+ /* Skip lead white space. */
+ while (*p == ' ')
+ p++;
+
+ if (*p == '\0')
+ return 0;
+
+ n = 1;
+ args[1] = p;
+
+ /* Squeze blanks out by moving non-blanks toward start of string.
+ Isolate operands, whenever comma is found. */
+ to = p;
+ while (*p != '\0')
{
- iP++;
- } /* Skip lead space, if any */
+ if (*p == ' '
+ && (! ISALNUM (p[1])
+ || ! ISALNUM (p[-1])))
+ p++;
+ else if (*p == ',')
+ {
+ /* Start of operand. */
+ if (n == 3)
+ {
+ as_bad (_("too many operands"));
+ return -1;
+ }
+ *to++ = '\0'; /* Terminate argument. */
+ args[++n] = to; /* Start next argument. */
+ p++;
+ }
+ else
+ *to++ = *p++;
+ }
+ *to = '\0';
+ return n;
+}
+
+/* i_scan: perform lexical scan of ascii assembler instruction.
+
+ Input assumptions:
+ - input string is an i80960 instruction (not a pseudo-op)
+ - all comments and labels have been removed
+ - all strings of whitespace have been collapsed to a single blank.
+
+ Output:
+ args[0] points to opcode, other entries point to operands. All strings:
+ - are NULL-terminated
+ - contain no whitespace
+ - have character constants ('x') replaced with a decimal number
+
+ Return value:
+ Number of operands (0,1,2, or 3) or -1 on error. */
+
+static int
+i_scan (char *iP, /* Pointer to ascii instruction; Mucked by us. */
+ char *args[]) /* Output arg: pointers to opcode and operands placed here.
+ Must accommodate 4 entries. */
+{
+ /* Isolate opcode. */
+ if (*(iP) == ' ')
+ iP++;
+
args[0] = iP;
for (; *iP != ' '; iP++)
{
if (*iP == '\0')
{
- /* There are no operands */
+ /* There are no operands. */
if (args[0] == iP)
{
- /* We never moved: there was no opcode either! */
+ /* We never moved: there was no opcode either! */
as_bad (_("missing opcode"));
return -1;
}
return 0;
}
}
- *iP++ = '\0'; /* Terminate opcode */
+ *iP++ = '\0';
return (get_args (iP, args));
-} /* i_scan() */
-
-/*****************************************************************************
- mem_fmt: generate a MEMA- or MEMB-format instruction
+}
- *************************************************************************** */
static void
-mem_fmt (args, oP, callx)
- char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
- struct i960_opcode *oP; /* Pointer to description of instruction */
- int callx; /* Is this a callx opcode */
+brcnt_emit (void)
{
- int i; /* Loop counter */
- struct regop regop; /* Description of register operand */
- char opdesc; /* Operand descriptor byte */
- memS instr; /* Description of binary to be output */
- char *outP; /* Where the binary was output to */
- expressionS expr; /* Parsed expression */
- /* ->description of deferred address fixup */
- fixS *fixP;
-
-#ifdef OBJ_COFF
- /* COFF support isn't in place yet for callx relaxing. */
- callx = 0;
-#endif
-
- memset (&instr, '\0', sizeof (memS));
- instr.opcode = oP->opcode;
-
- /* Process operands. */
- for (i = 1; i <= oP->num_ops; i++)
- {
- opdesc = oP->operand[i - 1];
-
- if (MEMOP (opdesc))
- {
- parse_memop (&instr, args[i], oP->format);
- }
- else
- {
- parse_regop (®op, args[i], opdesc);
- instr.opcode |= regop.n << 19;
- }
- }
+ /* Emit call to "increment" routine. */
+ ctrl_fmt (BR_CNT_FUNC, CALL, 1);
+ /* Emit inline counter to be incremented. */
+ emit (0);
+}
- /* Parse the displacement; this must be done before emitting the
- opcode, in case it is an expression using `.'. */
- parse_expr (instr.e, &expr);
+static char *
+brlab_next (void)
+{
+ static char buf[20];
- /* Output opcode */
- outP = emit (instr.opcode);
+ sprintf (buf, "%s%d", BR_LABEL_BASE, br_cnt++);
+ return buf;
+}
- if (instr.disp == 0)
- {
- return;
- }
+static void
+ctrl_fmt (char *targP, /* Pointer to text of lone operand (if any). */
+ long opcode, /* Template of instruction. */
+ int num_ops) /* Number of operands. */
+{
+ int instrument; /* TRUE iff we should add instrumentation to track
+ how often the branch is taken. */
- /* Process the displacement */
- switch (expr.X_op)
+ if (num_ops == 0)
+ emit (opcode); /* Output opcode. */
+ else
{
- case O_illegal:
- as_bad (_("expression syntax error"));
- break;
+ instrument = instrument_branches && (opcode != CALL)
+ && (opcode != B) && (opcode != RET) && (opcode != BAL);
- case O_constant:
- if (instr.disp == 32)
- {
- (void) emit (offs (expr)); /* Output displacement */
- }
- else
+ if (instrument)
{
- /* 12-bit displacement */
- if (offs (expr) & ~0xfff)
- {
- /* Won't fit in 12 bits: convert already-output
- * instruction to MEMB format, output
- * displacement.
- */
- mema_to_memb (outP);
- (void) emit (offs (expr));
- }
- else
- {
- /* WILL fit in 12 bits: OR into opcode and
- * overwrite the binary we already put out
- */
- instr.opcode |= offs (expr);
- md_number_to_chars (outP, instr.opcode, 4);
- }
+ brcnt_emit ();
+ colon (brlab_next ());
}
- break;
- default:
- if (instr.disp == 12)
- {
- /* Displacement is dependent on a symbol, whose value
- * may change at link time. We HAVE to reserve 32 bits.
- * Convert already-output opcode to MEMB format.
- */
- mema_to_memb (outP);
- }
+ /* The operand MUST be an ip-relative displacement. Parse it
+ and set up address fix for the instruction we just output. */
+ get_cdisp (targP, "CTRL", opcode, 24, 0, 0);
- /* Output 0 displacement and set up address fixup for when
- * this symbol's value becomes known.
- */
- outP = emit ((long) 0);
- fixP = fix_new_exp (frag_now,
- outP - frag_now->fr_literal,
- 4,
- &expr,
- 0,
- NO_RELOC);
- /* Steve's linker relaxing hack. Mark this 32-bit relocation as
- being in the instruction stream, specifically as part of a callx
- instruction. */
- fixP->fx_bsr = callx;
- break;
+ if (instrument)
+ brcnt_emit ();
}
-} /* memfmt() */
-
-/*****************************************************************************
- mema_to_memb: convert a MEMA-format opcode to a MEMB-format opcode.
-
- There are 2 possible MEMA formats:
- - displacement only
- - displacement + abase
-
- They are distinguished by the setting of the MEMA_ABASE bit.
+}
- *************************************************************************** */
static void
-mema_to_memb (opcodeP)
- char *opcodeP; /* Where to find the opcode, in target byte order */
-{
- long opcode; /* Opcode in host byte order */
- long mode; /* Mode bits for MEMB instruction */
+cobr_fmt (/* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */
+ char *arg[],
+ /* Opcode, with branch-prediction bits already set if necessary. */
+ long opcode,
+ /* Pointer to description of instruction. */
+ struct i960_opcode *oP)
+{
+ long instr; /* 32-bit instruction. */
+ struct regop regop; /* Description of register operand. */
+ int n; /* Number of operands. */
+ int var_frag; /* 1 if varying length code fragment should
+ be emitted; 0 if an address fix
+ should be emitted. */
- opcode = md_chars_to_number (opcodeP, 4);
- know (!(opcode & MEMB_BIT));
+ instr = opcode;
+ n = oP->num_ops;
- mode = MEMB_BIT | D_BIT;
- if (opcode & MEMA_ABASE)
+ if (n >= 1)
{
- mode |= A_BIT;
+ /* First operand (if any) of a COBR is always a register
+ operand. Parse it. */
+ parse_regop (®op, arg[1], oP->operand[0]);
+ instr |= (regop.n << 19) | (regop.mode << 13);
}
- opcode &= 0xffffc000; /* Clear MEMA offset and mode bits */
- opcode |= mode; /* Set MEMB mode bits */
-
- md_number_to_chars (opcodeP, opcode, 4);
-} /* mema_to_memb() */
-
-/*****************************************************************************
- parse_expr: parse an expression
-
- Use base assembler's expression parser to parse an expression.
- It, unfortunately, runs off a global which we have to save/restore
- in order to make it work for us.
-
- An empty expression string is treated as an absolute 0.
-
- Sets O_illegal regardless of expression evaluation if entire input
- string is not consumed in the evaluation -- tolerate no dangling junk!
-
- *************************************************************************** */
-static void
-parse_expr (textP, expP)
- char *textP; /* Text of expression to be parsed */
- expressionS *expP; /* Where to put the results of parsing */
-{
- char *save_in; /* Save global here */
- symbolS *symP;
-
- know (textP);
-
- if (*textP == '\0')
+ if (n >= 2)
{
- /* Treat empty string as absolute 0 */
- expP->X_add_symbol = expP->X_op_symbol = NULL;
- expP->X_add_number = 0;
- expP->X_op = O_constant;
+ /* Second operand (if any) of a COBR is always a register
+ operand. Parse it. */
+ parse_regop (®op, arg[2], oP->operand[1]);
+ instr |= (regop.n << 14) | regop.special;
}
+
+ if (n < 3)
+ emit (instr);
else
{
- save_in = input_line_pointer; /* Save global */
- input_line_pointer = textP; /* Make parser work for us */
-
- (void) expression (expP);
- if ((size_t) (input_line_pointer - textP) != strlen (textP))
- {
- /* Did not consume all of the input */
- expP->X_op = O_illegal;
- }
- symP = expP->X_add_symbol;
- if (symP && (hash_find (reg_hash, S_GET_NAME (symP))))
+ if (instrument_branches)
{
- /* Register name in an expression */
- /* FIXME: this isn't much of a check any more. */
- expP->X_op = O_illegal;
+ brcnt_emit ();
+ colon (brlab_next ());
}
- input_line_pointer = save_in; /* Restore global */
+ /* A third operand to a COBR is always a displacement. Parse
+ it; if it's relaxable (a cobr "j" directive, or any cobr
+ other than bbs/bbc when the "-norelax" option is not in use)
+ set up a variable code fragment; otherwise set up an address
+ fix. */
+ var_frag = !norelax || (oP->format == COJ); /* TRUE or FALSE */
+ get_cdisp (arg[3], "COBR", instr, 13, var_frag, 0);
+
+ if (instrument_branches)
+ brcnt_emit ();
}
}
-/*****************************************************************************
- parse_ldcont:
- Parse and replace a 'ldconst' pseudo-instruction with an appropriate
- i80960 instruction.
-
- Assumes the input consists of:
- arg[0] opcode mnemonic ('ldconst')
- arg[1] first operand (constant)
- arg[2] name of register to be loaded
+/* Assumptions about the passed-in text:
+ - all comments, labels removed
+ - text is an instruction
+ - all white space compressed to single blanks
+ - all character constants have been replaced with decimal. */
- Replaces opcode and/or operands as appropriate.
+void
+md_assemble (char *textP)
+{
+ /* Parsed instruction text, containing NO whitespace: arg[0]->opcode
+ mnemonic arg[1-3]->operands, with char constants replaced by
+ decimal numbers. */
+ char *args[4];
+ /* Number of instruction operands. */
+ int n_ops;
+ /* Pointer to instruction description. */
+ struct i960_opcode *oP;
+ /* TRUE iff opcode mnemonic included branch-prediction suffix (".f"
+ or ".t"). */
+ int branch_predict;
+ /* Setting of branch-prediction bit(s) to be OR'd into instruction
+ opcode of CTRL/COBR format instructions. */
+ long bp_bits;
+ /* Offset of last character in opcode mnemonic. */
+ int n;
+ const char *bp_error_msg = _("branch prediction invalid on this opcode");
- Returns the new number of arguments, or -1 on failure.
+ /* Parse instruction into opcode and operands. */
+ memset (args, '\0', sizeof (args));
- *************************************************************************** */
-static
-int
-parse_ldconst (arg)
- char *arg[]; /* See above */
-{
- int n; /* Constant to be loaded */
- int shift; /* Shift count for "shlo" instruction */
- static char buf[5]; /* Literal for first operand */
- static char buf2[5]; /* Literal for second operand */
- expressionS e; /* Parsed expression */
+ n_ops = i_scan (textP, args);
- arg[3] = NULL; /* So we can tell at the end if it got used or not */
+ if (n_ops == -1)
+ return; /* Error message already issued. */
- parse_expr (arg[1], &e);
- switch (e.X_op)
+ /* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction. */
+ if (!strcmp (args[0], "ldconst"))
{
- default:
- /* We're dependent on one or more symbols -- use "lda" */
- arg[0] = "lda";
- break;
+ n_ops = parse_ldconst (args);
+ if (n_ops == -1)
+ return;
+ }
- case O_constant:
- /* Try the following mappings:
- * ldconst 0,<reg> ->mov 0,<reg>
- * ldconst 31,<reg> ->mov 31,<reg>
- * ldconst 32,<reg> ->addo 1,31,<reg>
- * ldconst 62,<reg> ->addo 31,31,<reg>
- * ldconst 64,<reg> ->shlo 8,3,<reg>
- * ldconst -1,<reg> ->subo 1,0,<reg>
- * ldconst -31,<reg>->subo 31,0,<reg>
- *
- * anthing else becomes:
- * lda xxx,<reg>
- */
- n = offs (e);
- if ((0 <= n) && (n <= 31))
- {
- arg[0] = "mov";
+ /* Check for branch-prediction suffix on opcode mnemonic, strip it off. */
+ n = strlen (args[0]) - 1;
+ branch_predict = 0;
+ bp_bits = 0;
- }
- else if ((-31 <= n) && (n <= -1))
- {
- arg[0] = "subo";
- arg[3] = arg[2];
- sprintf (buf, "%d", -n);
- arg[1] = buf;
- arg[2] = "0";
+ if (args[0][n - 1] == '.' && (args[0][n] == 't' || args[0][n] == 'f'))
+ {
+ /* We could check here to see if the target architecture
+ supports branch prediction, but why bother? The bit will
+ just be ignored by processors that don't use it. */
+ branch_predict = 1;
+ bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN;
+ args[0][n - 1] = '\0'; /* Strip suffix from opcode mnemonic */
+ }
- }
- else if ((32 <= n) && (n <= 62))
- {
- arg[0] = "addo";
- arg[3] = arg[2];
- arg[1] = "31";
- sprintf (buf, "%d", n - 31);
- arg[2] = buf;
-
- }
- else if ((shift = shift_ok (n)) != 0)
- {
- arg[0] = "shlo";
- arg[3] = arg[2];
- sprintf (buf, "%d", shift);
- arg[1] = buf;
- sprintf (buf2, "%d", n >> shift);
- arg[2] = buf2;
-
- }
- else
- {
- arg[0] = "lda";
- }
- break;
-
- case O_illegal:
- as_bad (_("invalid constant"));
- return -1;
- break;
- }
- return (arg[3] == 0) ? 2 : 3;
-}
-
-/*****************************************************************************
- parse_memop: parse a memory operand
-
- This routine is based on the observation that the 4 mode bits of the
- MEMB format, taken individually, have fairly consistent meaning:
-
- M3 (bit 13): 1 if displacement is present (D_BIT)
- M2 (bit 12): 1 for MEMB instructions (MEMB_BIT)
- M1 (bit 11): 1 if index is present (I_BIT)
- M0 (bit 10): 1 if abase is present (A_BIT)
-
- So we parse the memory operand and set bits in the mode as we find
- things. Then at the end, if we go to MEMB format, we need only set
- the MEMB bit (M2) and our mode is built for us.
-
- Unfortunately, I said "fairly consistent". The exceptions:
-
- DBIA
- 0100 Would seem illegal, but means "abase-only".
-
- 0101 Would seem to mean "abase-only" -- it means IP-relative.
- Must be converted to 0100.
-
- 0110 Would seem to mean "index-only", but is reserved.
- We turn on the D bit and provide a 0 displacement.
-
- The other thing to observe is that we parse from the right, peeling
- things * off as we go: first any index spec, then any abase, then
- the displacement.
-
- *************************************************************************** */
-static
-void
-parse_memop (memP, argP, optype)
- memS *memP; /* Where to put the results */
- char *argP; /* Text of the operand to be parsed */
- int optype; /* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16 */
-{
- char *indexP; /* Pointer to index specification with "[]" removed */
- char *p; /* Temp char pointer */
- char iprel_flag; /* True if this is an IP-relative operand */
- int regnum; /* Register number */
- /* Scale factor: 1,2,4,8, or 16. Later converted to internal format
- (0,1,2,3,4 respectively). */
- int scale;
- int mode; /* MEMB mode bits */
- int *intP; /* Pointer to register number */
-
- /* The following table contains the default scale factors for each
- type of memory instruction. It is accessed using (optype-MEM1)
- as an index -- thus it assumes the 'optype' constants are
- assigned consecutive values, in the order they appear in this
- table. */
- static const int def_scale[] =
- {
- 1, /* MEM1 */
- 2, /* MEM2 */
- 4, /* MEM4 */
- 8, /* MEM8 */
- -1, /* MEM12 -- no valid default */
- 16 /* MEM16 */
- };
-
- iprel_flag = mode = 0;
-
- /* Any index present? */
- indexP = get_ispec (argP);
- if (indexP)
+ /* Look up opcode mnemonic in table and check number of operands.
+ Check that opcode is legal for the target architecture. If all
+ looks good, assemble instruction. */
+ oP = (struct i960_opcode *) hash_find (op_hash, args[0]);
+ if (!oP || !targ_has_iclass (oP->iclass))
+ as_bad (_("invalid opcode, \"%s\"."), args[0]);
+ else if (n_ops != oP->num_ops)
+ as_bad (_("improper number of operands. expecting %d, got %d"),
+ oP->num_ops, n_ops);
+ else
{
- p = strchr (indexP, '*');
- if (p == NULL)
- {
- /* No explicit scale -- use default for this instruction
- type and assembler mode. */
- if (flag_mri)
- scale = 1;
- else
- /* GNU960 compatibility */
- scale = def_scale[optype - MEM1];
- }
- else
- {
- *p++ = '\0'; /* Eliminate '*' */
-
- /* Now indexP->a '\0'-terminated register name,
- * and p->a scale factor.
- */
-
- if (!strcmp (p, "16"))
- {
- scale = 16;
- }
- else if (strchr ("1248", *p) && (p[1] == '\0'))
- {
- scale = *p - '0';
- }
- else
- {
- scale = -1;
- }
- }
-
- regnum = get_regnum (indexP); /* Get index reg. # */
- if (!IS_RG_REG (regnum))
- {
- as_bad (_("invalid index register"));
- return;
- }
-
- /* Convert scale to its binary encoding */
- switch (scale)
+ switch (oP->format)
{
- case 1:
- scale = 0 << 7;
+ case FBRA:
+ case CTRL:
+ ctrl_fmt (args[1], oP->opcode | bp_bits, oP->num_ops);
+ if (oP->format == FBRA)
+ /* Now generate a 'bno' to same arg */
+ ctrl_fmt (args[1], BNO | bp_bits, 1);
break;
- case 2:
- scale = 1 << 7;
+ case COBR:
+ case COJ:
+ cobr_fmt (args, oP->opcode | bp_bits, oP);
break;
- case 4:
- scale = 2 << 7;
+ case REG:
+ if (branch_predict)
+ as_warn ("%s", bp_error_msg);
+ reg_fmt (args, oP);
break;
- case 8:
- scale = 3 << 7;
+ case MEM1:
+ if (args[0][0] == 'c' && args[0][1] == 'a')
+ {
+ if (branch_predict)
+ as_warn ("%s", bp_error_msg);
+ mem_fmt (args, oP, 1);
+ break;
+ }
+ case MEM2:
+ case MEM4:
+ case MEM8:
+ case MEM12:
+ case MEM16:
+ if (branch_predict)
+ as_warn ("%s", bp_error_msg);
+ mem_fmt (args, oP, 0);
break;
- case 16:
- scale = 4 << 7;
+ case CALLJ:
+ if (branch_predict)
+ as_warn ("%s", bp_error_msg);
+ /* Output opcode & set up "fixup" (relocation); flag
+ relocation as 'callj' type. */
+ know (oP->num_ops == 1);
+ get_cdisp (args[1], "CTRL", oP->opcode, 24, 0, 1);
break;
default:
- as_bad (_("invalid scale factor"));
- return;
- };
-
- memP->opcode |= scale | regnum; /* Set index bits in opcode */
- mode |= I_BIT; /* Found a valid index spec */
- }
-
- /* Any abase (Register Indirect) specification present? */
- if ((p = strrchr (argP, '(')) != NULL)
- {
- /* "(" is there -- does it start a legal abase spec? If not, it
- could be part of a displacement expression. */
- intP = (int *) hash_find (areg_hash, p);
- if (intP != NULL)
- {
- /* Got an abase here */
- regnum = *intP;
- *p = '\0'; /* discard register spec */
- if (regnum == IPREL)
- {
- /* We have to specialcase ip-rel mode */
- iprel_flag = 1;
- }
- else
- {
- memP->opcode |= regnum << 14;
- mode |= A_BIT;
- }
- }
- }
-
- /* Any expression present? */
- memP->e = argP;
- if (*argP != '\0')
- {
- mode |= D_BIT;
- }
-
- /* Special-case ip-relative addressing */
- if (iprel_flag)
- {
- if (mode & I_BIT)
- {
- syntax ();
- }
- else
- {
- memP->opcode |= 5 << 10; /* IP-relative mode */
- memP->disp = 32;
+ BAD_CASE (oP->format);
+ break;
}
- return;
}
+}
- /* Handle all other modes */
- switch (mode)
- {
- case D_BIT | A_BIT:
- /* Go with MEMA instruction format for now (grow to MEMB later
- if 12 bits is not enough for the displacement). MEMA format
- has a single mode bit: set it to indicate that abase is
- present. */
- memP->opcode |= MEMA_ABASE;
- memP->disp = 12;
- break;
-
- case D_BIT:
- /* Go with MEMA instruction format for now (grow to MEMB later
- if 12 bits is not enough for the displacement). */
- memP->disp = 12;
- break;
-
- case A_BIT:
- /* For some reason, the bit string for this mode is not
- consistent: it should be 0 (exclusive of the MEMB bit), so we
- set it "by hand" here. */
- memP->opcode |= MEMB_BIT;
- break;
-
- case A_BIT | I_BIT:
- /* set MEMB bit in mode, and OR in mode bits */
- memP->opcode |= mode | MEMB_BIT;
- break;
-
- case I_BIT:
- /* Treat missing displacement as displacement of 0. */
- mode |= D_BIT;
- /* Fall into next case. */
- case D_BIT | A_BIT | I_BIT:
- case D_BIT | I_BIT:
- /* set MEMB bit in mode, and OR in mode bits */
- memP->opcode |= mode | MEMB_BIT;
- memP->disp = 32;
- break;
+void
+md_number_to_chars (char *buf,
+ valueT value,
+ int n)
+{
+ number_to_chars_littleendian (buf, value, n);
+}
- default:
- syntax ();
- break;
- }
+char *
+md_atof (int type, char *litP, int *sizeP)
+{
+ return ieee_md_atof (type, litP, sizeP, FALSE);
}
-/*****************************************************************************
- parse_po: parse machine-dependent pseudo-op
+static void
+md_number_to_imm (char *buf, long val, int n)
+{
+ md_number_to_chars (buf, val, n);
+}
- This is a top-level routine for machine-dependent pseudo-ops. It slurps
- up the rest of the input line, breaks out the individual arguments,
- and dispatches them to the correct handler.
- *************************************************************************** */
-static
-void
-parse_po (po_num)
- int po_num; /* Pseudo-op number: currently S_LEAFPROC or S_SYSPROC */
+static void
+md_number_to_field (char *instrP, /* Pointer to instruction to be fixed. */
+ long val, /* Address fixup value. */
+ bit_fixS *bfixP) /* Description of bit field to be fixed up. */
{
- /* Pointers operands, with no embedded whitespace.
- arg[0] unused, arg[1-3]->operands */
- char *args[4];
- int n_ops; /* Number of operands */
- char *p; /* Pointer to beginning of unparsed argument string */
- char eol; /* Character that indicated end of line */
+ int numbits; /* Length of bit field to be fixed. */
+ long instr; /* 32-bit instruction to be fixed-up. */
+ long sign; /* 0 or -1, according to sign bit of 'val'. */
- extern char is_end_of_line[];
+ /* Convert instruction back to host byte order. */
+ instr = md_chars_to_number (instrP, 4);
- /* Advance input pointer to end of line. */
- p = input_line_pointer;
- while (!is_end_of_line[(unsigned char) *input_line_pointer])
- {
- input_line_pointer++;
- }
- eol = *input_line_pointer; /* Save end-of-line char */
- *input_line_pointer = '\0'; /* Terminate argument list */
+ /* Surprise! -- we stored the number of bits to be modified rather
+ than a pointer to a structure. */
+ numbits = (int) (size_t) bfixP;
+ if (numbits == 1)
+ /* This is a no-op, stuck here by reloc_callj(). */
+ return;
- /* Parse out operands */
- n_ops = get_args (p, args);
- if (n_ops == -1)
- {
- return;
- }
+ know ((numbits == 13) || (numbits == 24));
- /* Dispatch to correct handler */
- switch (po_num)
+ /* Propagate sign bit of 'val' for the given number of bits. Result
+ should be all 0 or all 1. */
+ sign = val >> ((int) numbits - 1);
+ if (((val < 0) && (sign != -1))
+ || ((val > 0) && (sign != 0)))
+ as_bad (_("Fixup of %ld too large for field width of %d"),
+ val, numbits);
+ else
{
- case S_SYSPROC:
- s_sysproc (n_ops, args);
- break;
- case S_LEAFPROC:
- s_leafproc (n_ops, args);
- break;
- default:
- BAD_CASE (po_num);
- break;
+ /* Put bit field into instruction and write back in target
+ * byte order. */
+ val &= ~(-(1 << (int) numbits)); /* Clear unused sign bits. */
+ instr |= val;
+ md_number_to_chars (instrP, instr, 4);
}
-
- /* Restore eol, so line numbers get updated correctly. Base
- assembler assumes we leave input pointer pointing at char
- following the eol. */
- *input_line_pointer++ = eol;
}
+\f
-/*****************************************************************************
- parse_regop: parse a register operand.
-
- In case of illegal operand, issue a message and return some valid
- information so instruction processing can continue.
- *************************************************************************** */
-static
-void
-parse_regop (regopP, optext, opdesc)
- struct regop *regopP; /* Where to put description of register operand */
- char *optext; /* Text of operand */
- char opdesc; /* Descriptor byte: what's legal for this operand */
-{
- int n; /* Register number */
- expressionS e; /* Parsed expression */
-
- /* See if operand is a register */
- n = get_regnum (optext);
- if (n >= 0)
- {
- if (IS_RG_REG (n))
- {
- /* global or local register */
- if (!REG_ALIGN (opdesc, n))
- {
- as_bad (_("unaligned register"));
- }
- regopP->n = n;
- regopP->mode = 0;
- regopP->special = 0;
- return;
- }
- else if (IS_FP_REG (n) && FP_OK (opdesc))
- {
- /* Floating point register, and it's allowed */
- regopP->n = n - FP0;
- regopP->mode = 1;
- regopP->special = 0;
- return;
- }
- else if (IS_SF_REG (n) && SFR_OK (opdesc))
- {
- /* Special-function register, and it's allowed */
- regopP->n = n - SF0;
- regopP->mode = 0;
- regopP->special = 1;
- if (!targ_has_sfr (regopP->n))
- {
- as_bad (_("no such sfr in this architecture"));
- }
- return;
- }
- }
- else if (LIT_OK (opdesc))
- {
- /* How about a literal? */
- regopP->mode = 1;
- regopP->special = 0;
- if (FP_OK (opdesc))
- { /* floating point literal acceptable */
- /* Skip over 0f, 0d, or 0e prefix */
- if ((optext[0] == '0')
- && (optext[1] >= 'd')
- && (optext[1] <= 'f'))
- {
- optext += 2;
- }
+/* md_parse_option
+ Invocation line includes a switch not recognized by the base assembler.
+ See if it's a processor-specific option. For the 960, these are:
- if (!strcmp (optext, "0.0") || !strcmp (optext, "0"))
- {
- regopP->n = 0x10;
- return;
- }
- if (!strcmp (optext, "1.0") || !strcmp (optext, "1"))
- {
- regopP->n = 0x16;
- return;
- }
+ -norelax:
+ Conditional branch instructions that require displacements
+ greater than 13 bits (or that have external targets) should
+ generate errors. The default is to replace each such
+ instruction with the corresponding compare (or chkbit) and
+ branch instructions. Note that the Intel "j" cobr directives
+ are ALWAYS "de-optimized" in this way when necessary,
+ regardless of the setting of this option.
- }
- else
- { /* fixed point literal acceptable */
- parse_expr (optext, &e);
- if (e.X_op != O_constant
- || (offs (e) < 0) || (offs (e) > 31))
- {
- as_bad (_("illegal literal"));
- offs (e) = 0;
- }
- regopP->n = offs (e);
- return;
- }
- }
+ -b:
+ Add code to collect information about branches taken, for
+ later optimization of branch prediction bits by a separate
+ tool. COBR and CNTL format instructions have branch
+ prediction bits (in the CX architecture); if "BR" represents
+ an instruction in one of these classes, the following rep-
+ resents the code generated by the assembler:
- /* Nothing worked */
- syntax ();
- regopP->mode = 0; /* Register r0 is always a good one */
- regopP->n = 0;
- regopP->special = 0;
-} /* parse_regop() */
+ call <increment routine>
+ .word 0 # pre-counter
+ Label: BR
+ call <increment routine>
+ .word 0 # post-counter
-/*****************************************************************************
- reg_fmt: generate a REG-format instruction
+ A table of all such "Labels" is also generated.
- *************************************************************************** */
-static void
-reg_fmt (args, oP)
- char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
- struct i960_opcode *oP; /* Pointer to description of instruction */
+ -AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA:
+ Select the 80960 architecture. Instructions or features not
+ supported by the selected architecture cause fatal errors.
+ The default is to generate code for any instruction or feature
+ that is supported by SOME version of the 960 (even if this
+ means mixing architectures!). */
+
+const char *md_shortopts = "A:b";
+struct option md_longopts[] =
{
- long instr; /* Binary to be output */
- struct regop regop; /* Description of register operand */
- int n_ops; /* Number of operands */
+#define OPTION_LINKRELAX (OPTION_MD_BASE)
+ {"linkrelax", no_argument, NULL, OPTION_LINKRELAX},
+ {"link-relax", no_argument, NULL, OPTION_LINKRELAX},
+#define OPTION_NORELAX (OPTION_MD_BASE + 1)
+ {"norelax", no_argument, NULL, OPTION_NORELAX},
+ {"no-relax", no_argument, NULL, OPTION_NORELAX},
+ {NULL, no_argument, NULL, 0}
+};
+size_t md_longopts_size = sizeof (md_longopts);
- instr = oP->opcode;
- n_ops = oP->num_ops;
+struct tabentry
+{
+ const char *flag;
+ int arch;
+};
+static const struct tabentry arch_tab[] =
+{
+ {"KA", ARCH_KA},
+ {"KB", ARCH_KB},
+ {"SA", ARCH_KA}, /* Synonym for KA. */
+ {"SB", ARCH_KB}, /* Synonym for KB. */
+ {"KC", ARCH_MC}, /* Synonym for MC. */
+ {"MC", ARCH_MC},
+ {"CA", ARCH_CA},
+ {"JX", ARCH_JX},
+ {"HX", ARCH_HX},
+ {NULL, 0}
+};
- if (n_ops >= 1)
+int
+md_parse_option (int c, char *arg)
+{
+ switch (c)
{
- parse_regop (®op, args[1], oP->operand[0]);
+ case OPTION_LINKRELAX:
+ linkrelax = 1;
+ flag_keep_locals = 1;
+ break;
- if ((n_ops == 1) && !(instr & M3))
- {
- /* 1-operand instruction in which the dst field should
- * be used (instead of src1).
- */
- regop.n <<= 19;
- if (regop.special)
- {
- regop.mode = regop.special;
- }
- regop.mode <<= 13;
- regop.special = 0;
- }
- else
- {
- /* regop.n goes in bit 0, needs no shifting */
- regop.mode <<= 11;
- regop.special <<= 5;
- }
- instr |= regop.n | regop.mode | regop.special;
- }
+ case OPTION_NORELAX:
+ norelax = 1;
+ break;
- if (n_ops >= 2)
- {
- parse_regop (®op, args[2], oP->operand[1]);
+ case 'b':
+ instrument_branches = 1;
+ break;
- if ((n_ops == 2) && !(instr & M3))
- {
- /* 2-operand instruction in which the dst field should
- * be used instead of src2).
- */
- regop.n <<= 19;
- if (regop.special)
- {
- regop.mode = regop.special;
- }
- regop.mode <<= 13;
- regop.special = 0;
- }
- else
- {
- regop.n <<= 14;
- regop.mode <<= 12;
- regop.special <<= 6;
- }
- instr |= regop.n | regop.mode | regop.special;
- }
- if (n_ops == 3)
- {
- parse_regop (®op, args[3], oP->operand[2]);
- if (regop.special)
- {
- regop.mode = regop.special;
- }
- instr |= (regop.n <<= 19) | (regop.mode <<= 13);
+ case 'A':
+ {
+ const struct tabentry *tp;
+ char *p = arg;
+
+ for (tp = arch_tab; tp->flag != NULL; tp++)
+ if (!strcmp (p, tp->flag))
+ break;
+
+ if (tp->flag == NULL)
+ {
+ as_bad (_("invalid architecture %s"), p);
+ return 0;
+ }
+ else
+ architecture = tp->arch;
+ }
+ break;
+
+ default:
+ return 0;
}
- emit (instr);
+
+ return 1;
}
-/*****************************************************************************
- relax_cobr:
- Replace cobr instruction in a code fragment with equivalent branch and
- compare instructions, so it can reach beyond a 13-bit displacement.
- Set up an address fix/relocation for the new branch instruction.
+void
+md_show_usage (FILE *stream)
+{
+ int i;
- *************************************************************************** */
+ fprintf (stream, _("I960 options:\n"));
+ for (i = 0; arch_tab[i].flag; i++)
+ fprintf (stream, "%s-A%s", i ? " | " : "", arch_tab[i].flag);
+ fprintf (stream, _("\n\
+ specify variant of 960 architecture\n\
+-b add code to collect statistics about branches taken\n\
+-link-relax preserve individual alignment directives so linker\n\
+ can do relaxing (b.out format only)\n\
+-no-relax don't alter compare-and-branch instructions for\n\
+ long displacements\n"));
+}
+\f
+/* relax_cobr:
+ Replace cobr instruction in a code fragment with equivalent branch and
+ compare instructions, so it can reach beyond a 13-bit displacement.
+ Set up an address fix/relocation for the new branch instruction. */
/* This "conditional jump" table maps cobr instructions into
equivalent compare and branch opcodes. */
+
static const
struct
{
{ CMPI, BO }, /* 0x3f - cmpibo */
};
-static
-void
-relax_cobr (fragP)
- register fragS *fragP; /* fragP->fr_opcode is assumed to point to
- * the cobr instruction, which comes at the
- * end of the code fragment.
- */
+static void
+relax_cobr (fragS *fragP) /* fragP->fr_opcode is assumed to point to
+ the cobr instruction, which comes at the
+ end of the code fragment. */
{
int opcode, src1, src2, m1, s2;
- /* Bit fields from cobr instruction */
- long bp_bits; /* Branch prediction bits from cobr instruction */
- long instr; /* A single i960 instruction */
- /* ->instruction to be replaced */
+ /* Bit fields from cobr instruction. */
+ long bp_bits; /* Branch prediction bits from cobr instruction. */
+ long instr; /* A single i960 instruction. */
+ /* ->instruction to be replaced. */
char *iP;
- fixS *fixP; /* Relocation that can be done at assembly time */
+ fixS *fixP; /* Relocation that can be done at assembly time. */
- /* PICK UP & PARSE COBR INSTRUCTION */
+ /* Pick up & parse cobr instruction. */
iP = fragP->fr_opcode;
instr = md_chars_to_number (iP, 4);
- opcode = ((instr >> 24) & 0xff) - 0x30; /* "-0x30" for table index */
+ opcode = ((instr >> 24) & 0xff) - 0x30; /* "-0x30" for table index. */
src1 = (instr >> 19) & 0x1f;
m1 = (instr >> 13) & 1;
s2 = instr & 1;
src2 = (instr >> 14) & 0x1f;
bp_bits = instr & BP_MASK;
- /* GENERATE AND OUTPUT COMPARE INSTRUCTION */
+ /* Generate and output compare instruction. */
instr = coj[opcode].compare
| src1 | (m1 << 11) | (s2 << 6) | (src2 << 14);
md_number_to_chars (iP, instr, 4);
- /* OUTPUT BRANCH INSTRUCTION */
+ /* Output branch instruction. */
md_number_to_chars (iP + 4, coj[opcode].branch | bp_bits, 4);
- /* SET UP ADDRESS FIXUP/RELOCATION */
+ /* Set up address fixup/relocation. */
fixP = fix_new (fragP,
iP + 4 - fragP->fr_literal,
4,
1,
NO_RELOC);
- fixP->fx_bit_fixP = (bit_fixS *) 24; /* Store size of bit field */
+ fixP->fx_bit_fixP = (bit_fixS *) 24; /* Store size of bit field. */
fragP->fr_fix += 4;
frag_wane (fragP);
}
-/*****************************************************************************
- reloc_callj: Relocate a 'callj' instruction
-
- This is a "non-(GNU)-standard" machine-dependent hook. The base
- assembler calls it when it decides it can relocate an address at
- assembly time instead of emitting a relocation directive.
+/* md_convert_frag:
- Check to see if the relocation involves a 'callj' instruction to a:
- sysproc: Replace the default 'call' instruction with a 'calls'
- leafproc: Replace the default 'call' instruction with a 'bal'.
- other proc: Do nothing.
+ Called by base assembler after address relaxation is finished: modify
+ variable fragments according to how much relaxation was done.
- See b.out.h for details on the 'n_other' field in a symbol structure.
+ If the fragment substate is still 1, a 13-bit displacement was enough
+ to reach the symbol in question. Set up an address fixup, but otherwise
+ leave the cobr instruction alone.
- IMPORTANT!:
- Assumes the caller has already figured out, in the case of a leafproc,
- to use the 'bal' entry point, and has substituted that symbol into the
- passed fixup structure.
+ If the fragment substate is 2, a 13-bit displacement was not enough.
+ Replace the cobr with a two instructions (a compare and a branch). */
- *************************************************************************** */
void
-reloc_callj (fixP)
- /* Relocation that can be done at assembly time */
- fixS *fixP;
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+ segT sec ATTRIBUTE_UNUSED,
+ fragS *fragP)
{
- /* Points to the binary for the instruction being relocated. */
- char *where;
+ /* Structure describing needed address fix. */
+ fixS *fixP;
- if (!fixP->fx_tcbit)
+ switch (fragP->fr_subtype)
{
- /* This wasn't a callj instruction in the first place */
- return;
+ case 1:
+ /* Leave single cobr instruction. */
+ fixP = fix_new (fragP,
+ fragP->fr_opcode - fragP->fr_literal,
+ 4,
+ fragP->fr_symbol,
+ fragP->fr_offset,
+ 1,
+ NO_RELOC);
+
+ fixP->fx_bit_fixP = (bit_fixS *) 13; /* Size of bit field. */
+ break;
+ case 2:
+ /* Replace cobr with compare/branch instructions. */
+ relax_cobr (fragP);
+ break;
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
}
+}
- where = fixP->fx_frag->fr_literal + fixP->fx_where;
+/* md_estimate_size_before_relax: How much does it look like *fragP will grow?
- if (TC_S_IS_SYSPROC (fixP->fx_addsy))
- {
- /* Symbol is a .sysproc: replace 'call' with 'calls'. System
- procedure number is (other-1). */
- md_number_to_chars (where, CALLS | TC_S_GET_SYSPROC (fixP->fx_addsy), 4);
+ Called by base assembler just before address relaxation.
+ Return the amount by which the fragment will grow.
- /* Nothing else needs to be done for this instruction. Make
- sure 'md_number_to_field()' will perform a no-op. */
- fixP->fx_bit_fixP = (bit_fixS *) 1;
+ Any symbol that is now undefined will not become defined; cobr's
+ based on undefined symbols will have to be replaced with a compare
+ instruction and a branch instruction, and the code fragment will grow
+ by 4 bytes. */
- }
- else if (TC_S_IS_CALLNAME (fixP->fx_addsy))
+int
+md_estimate_size_before_relax (fragS *fragP, segT segment_type)
+{
+ /* If symbol is undefined in this segment, go to "relaxed" state
+ (compare and branch instructions instead of cobr) right now. */
+ if (S_GET_SEGMENT (fragP->fr_symbol) != segment_type)
{
- /* Should not happen: see block comment above */
- as_fatal (_("Trying to 'bal' to %s"), S_GET_NAME (fixP->fx_addsy));
+ relax_cobr (fragP);
+ return 4;
}
- else if (TC_S_IS_BALNAME (fixP->fx_addsy))
+
+ return md_relax_table[fragP->fr_subtype].rlx_length;
+}
+
+#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+
+/* md_ri_to_chars:
+ This routine exists in order to overcome machine byte-order problems
+ when dealing with bit-field entries in the relocation_info struct.
+
+ But relocation info will be used on the host machine only (only
+ executable code is actually downloaded to the i80960). Therefore,
+ we leave it in host byte order. */
+
+static void
+md_ri_to_chars (char *where, struct relocation_info *ri)
+{
+ host_number_to_chars (where, ri->r_address, 4);
+ host_number_to_chars (where + 4, ri->r_index, 3);
+#if WORDS_BIGENDIAN
+ where[7] = (ri->r_pcrel << 7
+ | ri->r_length << 5
+ | ri->r_extern << 4
+ | ri->r_bsr << 3
+ | ri->r_disp << 2
+ | ri->r_callj << 1
+ | ri->nuthin << 0);
+#else
+ where[7] = (ri->r_pcrel << 0
+ | ri->r_length << 1
+ | ri->r_extern << 3
+ | ri->r_bsr << 4
+ | ri->r_disp << 5
+ | ri->r_callj << 6
+ | ri->nuthin << 7);
+#endif
+}
+
+#endif /* defined(OBJ_AOUT) | defined(OBJ_BOUT) */
+
+\f
+/* brtab_emit: generate the fetch-prediction branch table.
+
+ See the comments above the declaration of 'br_cnt' for details on
+ branch-prediction instrumentation.
+
+ The code emitted here would be functionally equivalent to the following
+ example assembler source.
+
+ .data
+ .align 2
+ BR_TAB_NAME:
+ .word 0 # link to next table
+ .word 3 # length of table
+ .word LBRANCH0 # 1st entry in table proper
+ .word LBRANCH1
+ .word LBRANCH2 */
+
+void
+brtab_emit (void)
+{
+ int i;
+ char buf[20];
+ /* Where the binary was output to. */
+ char *p;
+
+ if (!instrument_branches)
+ return;
+
+ subseg_set (data_section, 0); /* .data */
+ frag_align (2, 0, 0); /* .align 2 */
+ record_alignment (now_seg, 2);
+ colon (BR_TAB_NAME); /* BR_TAB_NAME: */
+ emit (0); /* .word 0 #link to next table */
+ emit (br_cnt); /* .word n #length of table */
+
+ for (i = 0; i < br_cnt; i++)
{
- /* Replace 'call' with 'bal'; both instructions have the same
- format, so calling code should complete relocation as if
- nothing happened here. */
- md_number_to_chars (where, BAL, 4);
+ sprintf (buf, "%s%d", BR_LABEL_BASE, i);
+ p = emit (0);
+ fix_new (frag_now,
+ p - frag_now->fr_literal,
+ 4, symbol_find (buf), 0, 0, NO_RELOC);
}
- else if (TC_S_IS_BADPROC (fixP->fx_addsy))
- {
- as_bad (_("Looks like a proc, but can't tell what kind.\n"));
- } /* switch on proc type */
-
- /* else Symbol is neither a sysproc nor a leafproc */
}
-/*****************************************************************************
- s_leafproc: process .leafproc pseudo-op
+/* s_leafproc: process .leafproc pseudo-op
.leafproc takes two arguments, the second one is optional:
arg[1]: name of 'call' entry point to leaf procedure
If there are 2 distinct arguments, we must make sure that the 'bal'
entry point immediately follows the 'call' entry point in the linked
- list of symbols.
+ list of symbols. */
- *************************************************************************** */
static void
-s_leafproc (n_ops, args)
- int n_ops; /* Number of operands */
- char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
+s_leafproc (int n_ops, /* Number of operands. */
+ char *args[]) /* args[1]->1st operand, args[2]->2nd operand. */
{
- symbolS *callP; /* Pointer to leafproc 'call' entry point symbol */
- symbolS *balP; /* Pointer to leafproc 'bal' entry point symbol */
+ symbolS *callP; /* Pointer to leafproc 'call' entry point symbol. */
+ symbolS *balP; /* Pointer to leafproc 'bal' entry point symbol. */
if ((n_ops != 1) && (n_ops != 2))
{
as_bad (_("should have 1 or 2 operands"));
return;
- } /* Check number of arguments */
+ }
/* Find or create symbol for 'call' entry point. */
callP = symbol_find_or_make (args[1]);
if (TC_S_IS_CALLNAME (callP))
- {
- as_warn (_("Redefining leafproc %s"), S_GET_NAME (callP));
- } /* is leafproc */
+ as_warn (_("Redefining leafproc %s"), S_GET_NAME (callP));
/* If that was the only argument, use it as the 'bal' entry point.
- * Otherwise, mark it as the 'call' entry point and find or create
- * another symbol for the 'bal' entry point.
- */
+ Otherwise, mark it as the 'call' entry point and find or create
+ another symbol for the 'bal' entry point. */
if ((n_ops == 1) || !strcmp (args[1], args[2]))
{
TC_S_FORCE_TO_BALNAME (callP);
-
}
else
{
balP = symbol_find_or_make (args[2]);
if (TC_S_IS_CALLNAME (balP))
- {
- as_warn (_("Redefining leafproc %s"), S_GET_NAME (balP));
- }
+ as_warn (_("Redefining leafproc %s"), S_GET_NAME (balP));
+
TC_S_FORCE_TO_BALNAME (balP);
#ifndef OBJ_ELF
tc_set_bal_of_call (callP, balP);
#endif
- } /* if only one arg, or the args are the same */
+ }
}
-/*
- s_sysproc: process .sysproc pseudo-op
+/* s_sysproc: process .sysproc pseudo-op
- .sysproc takes two arguments:
- arg[1]: name of entry point to system procedure
- arg[2]: 'entry_num' (index) of system procedure in the range
- [0,31] inclusive.
+ .sysproc takes two arguments:
+ arg[1]: name of entry point to system procedure
+ arg[2]: 'entry_num' (index) of system procedure in the range
+ [0,31] inclusive.
+
+ For [ab].out, we store the 'entrynum' in the 'n_other' field of
+ the symbol. Since that entry is normally 0, we bias 'entrynum'
+ by adding 1 to it. It must be unbiased before it is used. */
- For [ab].out, we store the 'entrynum' in the 'n_other' field of
- the symbol. Since that entry is normally 0, we bias 'entrynum'
- by adding 1 to it. It must be unbiased before it is used. */
static void
-s_sysproc (n_ops, args)
- int n_ops; /* Number of operands */
- char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
+s_sysproc (int n_ops, /* Number of operands. */
+ char *args[]) /* args[1]->1st operand, args[2]->2nd operand. */
{
expressionS exp;
symbolS *symP;
{
as_bad (_("should have two operands"));
return;
- } /* bad arg count */
+ }
/* Parse "entry_num" argument and check it for validity. */
parse_expr (args[2], &exp);
return;
}
- /* Find/make symbol and stick entry number (biased by +1) into it */
+ /* Find/make symbol and stick entry number (biased by +1) into it. */
symP = symbol_find_or_make (args[1]);
if (TC_S_IS_SYSPROC (symP))
- {
- as_warn (_("Redefining entrynum for sysproc %s"), S_GET_NAME (symP));
- } /* redefining */
+ as_warn (_("Redefining entrynum for sysproc %s"), S_GET_NAME (symP));
- TC_S_SET_SYSPROC (symP, offs (exp)); /* encode entry number */
+ TC_S_SET_SYSPROC (symP, offs (exp)); /* Encode entry number. */
TC_S_FORCE_TO_SYSPROC (symP);
}
-/*****************************************************************************
- shift_ok:
- Determine if a "shlo" instruction can be used to implement a "ldconst".
- This means that some number X < 32 can be shifted left to produce the
- constant of interest.
+/* parse_po: parse machine-dependent pseudo-op
- Return the shift count, or 0 if we can't do it.
- Caller calculates X by shifting original constant right 'shift' places.
+ This is a top-level routine for machine-dependent pseudo-ops. It slurps
+ up the rest of the input line, breaks out the individual arguments,
+ and dispatches them to the correct handler. */
- *************************************************************************** */
-static
-int
-shift_ok (n)
- int n; /* The constant of interest */
+static void
+parse_po (int po_num) /* Pseudo-op number: currently S_LEAFPROC or S_SYSPROC. */
{
- int shift; /* The shift count */
+ /* Pointers operands, with no embedded whitespace.
+ arg[0] unused, arg[1-3]->operands. */
+ char *args[4];
+ int n_ops; /* Number of operands. */
+ char *p; /* Pointer to beginning of unparsed argument string. */
+ char eol; /* Character that indicated end of line. */
- if (n <= 0)
- {
- /* Can't do it for negative numbers */
- return 0;
- }
+ extern char is_end_of_line[];
- /* Shift 'n' right until a 1 is about to be lost */
- for (shift = 0; (n & 1) == 0; shift++)
- {
- n >>= 1;
- }
+ /* Advance input pointer to end of line. */
+ p = input_line_pointer;
+ while (!is_end_of_line[(unsigned char) *input_line_pointer])
+ input_line_pointer++;
- if (n >= 32)
+ eol = *input_line_pointer; /* Save end-of-line char. */
+ *input_line_pointer = '\0'; /* Terminate argument list. */
+
+ /* Parse out operands. */
+ n_ops = get_args (p, args);
+ if (n_ops == -1)
+ return;
+
+ /* Dispatch to correct handler. */
+ switch (po_num)
{
- return 0;
+ case S_SYSPROC:
+ s_sysproc (n_ops, args);
+ break;
+ case S_LEAFPROC:
+ s_leafproc (n_ops, args);
+ break;
+ default:
+ BAD_CASE (po_num);
+ break;
}
- return shift;
+
+ /* Restore eol, so line numbers get updated correctly. Base
+ assembler assumes we leave input pointer pointing at char
+ following the eol. */
+ *input_line_pointer++ = eol;
}
-/* syntax: issue syntax error */
+/* reloc_callj: Relocate a 'callj' instruction
-static void
-syntax ()
-{
- as_bad (_("syntax error"));
-} /* syntax() */
+ This is a "non-(GNU)-standard" machine-dependent hook. The base
+ assembler calls it when it decides it can relocate an address at
+ assembly time instead of emitting a relocation directive.
-/* targ_has_sfr:
+ Check to see if the relocation involves a 'callj' instruction to a:
+ sysproc: Replace the default 'call' instruction with a 'calls'
+ leafproc: Replace the default 'call' instruction with a 'bal'.
+ other proc: Do nothing.
- Return TRUE iff the target architecture supports the specified
- special-function register (sfr). */
+ See b.out.h for details on the 'n_other' field in a symbol structure.
+
+ IMPORTANT!:
+ Assumes the caller has already figured out, in the case of a leafproc,
+ to use the 'bal' entry point, and has substituted that symbol into the
+ passed fixup structure. */
-static
int
-targ_has_sfr (n)
- int n; /* Number (0-31) of sfr */
+reloc_callj (fixS *fixP) /* Relocation that can be done at assembly time. */
{
- switch (architecture)
- {
- case ARCH_KA:
- case ARCH_KB:
- case ARCH_MC:
- case ARCH_JX:
- return 0;
- case ARCH_HX:
- return ((0 <= n) && (n <= 4));
- case ARCH_CA:
- default:
- return ((0 <= n) && (n <= 2));
- }
-}
+ /* Points to the binary for the instruction being relocated. */
+ char *where;
-/* targ_has_iclass:
+ if (!fixP->fx_tcbit)
+ /* This wasn't a callj instruction in the first place. */
+ return 0;
- Return TRUE iff the target architecture supports the indicated
- class of instructions. */
-static
-int
-targ_has_iclass (ic)
- /* Instruction class; one of:
- I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM, I_CX2, I_HX, I_HX2
- */
- int ic;
-{
- iclasses_seen |= ic;
- switch (architecture)
+ where = fixP->fx_frag->fr_literal + fixP->fx_where;
+
+ if (TC_S_IS_SYSPROC (fixP->fx_addsy))
{
- case ARCH_KA:
- return ic & (I_BASE | I_KX);
- case ARCH_KB:
- return ic & (I_BASE | I_KX | I_FP | I_DEC);
- case ARCH_MC:
- return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL);
- case ARCH_CA:
- return ic & (I_BASE | I_CX | I_CX2 | I_CASIM);
- case ARCH_JX:
- return ic & (I_BASE | I_CX2 | I_JX);
- case ARCH_HX:
- return ic & (I_BASE | I_CX2 | I_JX | I_HX);
- default:
- if ((iclasses_seen & (I_KX | I_FP | I_DEC | I_MIL))
- && (iclasses_seen & (I_CX | I_CX2)))
- {
- as_warn (_("architecture of opcode conflicts with that of earlier instruction(s)"));
- iclasses_seen &= ~ic;
- }
- return 1;
+ /* Symbol is a .sysproc: replace 'call' with 'calls'. System
+ procedure number is (other-1). */
+ md_number_to_chars (where, CALLS | TC_S_GET_SYSPROC (fixP->fx_addsy), 4);
+
+ /* Nothing else needs to be done for this instruction. Make
+ sure 'md_number_to_field()' will perform a no-op. */
+ fixP->fx_bit_fixP = (bit_fixS *) 1;
+ }
+ else if (TC_S_IS_CALLNAME (fixP->fx_addsy))
+ {
+ /* Should not happen: see block comment above. */
+ as_fatal (_("Trying to 'bal' to %s"), S_GET_NAME (fixP->fx_addsy));
+ }
+ else if (TC_S_IS_BALNAME (fixP->fx_addsy))
+ {
+ /* Replace 'call' with 'bal'; both instructions have the same
+ format, so calling code should complete relocation as if
+ nothing happened here. */
+ md_number_to_chars (where, BAL, 4);
}
+ else if (TC_S_IS_BADPROC (fixP->fx_addsy))
+ as_bad (_("Looks like a proc, but can't tell what kind.\n"));
+
+ /* Otherwise Symbol is neither a sysproc nor a leafproc. */
+ return 0;
}
/* Handle the MRI .endian pseudo-op. */
static void
-s_endian (ignore)
- int ignore;
+s_endian (int ignore ATTRIBUTE_UNUSED)
{
char *name;
char c;
- name = input_line_pointer;
- c = get_symbol_end ();
+ c = get_symbol_name (&name);
if (strcasecmp (name, "little") == 0)
;
else if (strcasecmp (name, "big") == 0)
else
as_warn (_("ignoring unrecognized .endian type `%s'"), name);
- *input_line_pointer = c;
+ (void) restore_line_pointer (c);
demand_empty_rest_of_line ();
}
/* We have no need to default values of symbols. */
-/* ARGSUSED */
symbolS *
-md_undefined_symbol (name)
- char *name;
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
On the i960, they're relative to the address of the instruction,
which we have set up as the address of the fixup too. */
long
-md_pcrel_from (fixP)
- fixS *fixP;
+md_pcrel_from (fixS *fixP)
{
return fixP->fx_where + fixP->fx_frag->fr_address;
}
-#ifdef BFD_ASSEMBLER
-int
-md_apply_fix (fixP, valp)
- fixS *fixP;
- valueT *valp;
-#else
void
-md_apply_fix (fixP, val)
- fixS *fixP;
- long val;
-#endif
+md_apply_fix (fixS *fixP,
+ valueT *valP,
+ segT seg ATTRIBUTE_UNUSED)
{
-#ifdef BFD_ASSEMBLER
- long val = *valp;
-#endif
+ long val = *valP;
char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
if (!fixP->fx_bit_fixP)
{
-#ifndef BFD_ASSEMBLER
- /* For callx, we always want to write out zero, and emit a
- symbolic relocation. */
- if (fixP->fx_bsr)
- val = 0;
-
- fixP->fx_addnumber = val;
-#endif
-
- md_number_to_imm (place, val, fixP->fx_size, fixP);
+ md_number_to_imm (place, val, fixP->fx_size);
+ }
+ else if ((int) (size_t) fixP->fx_bit_fixP == 13
+ && fixP->fx_addsy != NULL
+ && S_GET_SEGMENT (fixP->fx_addsy) == undefined_section)
+ {
+ /* This is a COBR instruction. They have only a
+ 13-bit displacement and are only to be used
+ for local branches: flag as error, don't generate
+ relocation. */
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("can't use COBR format with external label"));
+ fixP->fx_addsy = NULL;
}
else
md_number_to_field (place, val, fixP->fx_bit_fixP);
-#ifdef BFD_ASSEMBLER
- return 0;
-#endif
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_done = 1;
}
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
void
-tc_bout_fix_to_chars (where, fixP, segment_address_in_file)
- char *where;
- fixS *fixP;
- relax_addressT segment_address_in_file;
+tc_bout_fix_to_chars (char *where,
+ fixS *fixP,
+ relax_addressT segment_address_in_file)
{
static const unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
struct relocation_info ri;
#endif /* OBJ_AOUT or OBJ_BOUT */
-#if defined (OBJ_COFF) && defined (BFD)
-short
-tc_coff_fix2rtype (fixP)
- fixS *fixP;
-{
- if (fixP->fx_bsr)
- abort ();
-
- if (fixP->fx_pcrel == 0 && fixP->fx_size == 4)
- return R_RELLONG;
-
- if (fixP->fx_pcrel != 0 && fixP->fx_size == 4)
- return R_IPRMED;
-
- abort ();
- return 0;
-}
-
-int
-tc_coff_sizemachdep (frag)
- fragS *frag;
-{
- if (frag->fr_next)
- return frag->fr_next->fr_address - frag->fr_address;
- else
- return 0;
-}
-#endif
-
/* Align an address by rounding it up to the specified boundary. */
+
valueT
-md_section_align (seg, addr)
- segT seg;
- valueT addr; /* Address to be rounded up */
+md_section_align (segT seg,
+ valueT addr) /* Address to be rounded up. */
{
int align;
-#ifdef BFD_ASSEMBLER
+
align = bfd_get_section_alignment (stdoutput, seg);
-#else
- align = section_alignment[(int) seg];
-#endif
- return (addr + (1 << align) - 1) & (-1 << align);
+ return (addr + (1 << align) - 1) & -(1 << align);
}
extern int coff_flags;
-#ifdef OBJ_COFF
-void
-tc_headers_hook (headers)
- object_headers *headers;
-{
- switch (architecture)
- {
- case ARCH_KA:
- coff_flags |= F_I960KA;
- break;
-
- case ARCH_KB:
- coff_flags |= F_I960KB;
- break;
-
- case ARCH_MC:
- coff_flags |= F_I960MC;
- break;
-
- case ARCH_CA:
- coff_flags |= F_I960CA;
- break;
-
- case ARCH_JX:
- coff_flags |= F_I960JX;
- break;
-
- case ARCH_HX:
- coff_flags |= F_I960HX;
- break;
-
- default:
- if (iclasses_seen == I_BASE)
- coff_flags |= F_I960CORE;
- else if (iclasses_seen & I_CX)
- coff_flags |= F_I960CA;
- else if (iclasses_seen & I_HX)
- coff_flags |= F_I960HX;
- else if (iclasses_seen & I_JX)
- coff_flags |= F_I960JX;
- else if (iclasses_seen & I_CX2)
- coff_flags |= F_I960CA;
- else if (iclasses_seen & I_MIL)
- coff_flags |= F_I960MC;
- else if (iclasses_seen & (I_DEC | I_FP))
- coff_flags |= F_I960KB;
- else
- coff_flags |= F_I960KA;
- break;
- }
-
- if (flag_readonly_data_in_text)
- {
- headers->filehdr.f_magic = I960RWMAGIC;
- headers->aouthdr.magic = OMAGIC;
- }
- else
- {
- headers->filehdr.f_magic = I960ROMAGIC;
- headers->aouthdr.magic = NMAGIC;
- } /* set magic numbers */
-}
-
-#endif /* OBJ_COFF */
-
-#ifndef BFD_ASSEMBLER
-
-/* Things going on here:
-
- For bout, We need to assure a couple of simplifying
- assumptions about leafprocs for the linker: the leafproc
- entry symbols will be defined in the same assembly in
- which they're declared with the '.leafproc' directive;
- and if a leafproc has both 'call' and 'bal' entry points
- they are both global or both local.
-
- For coff, the call symbol has a second aux entry that
- contains the bal entry point. The bal symbol becomes a
- label.
-
- For coff representation, the call symbol has a second aux entry that
- contains the bal entry point. The bal symbol becomes a label. */
-
-void
-tc_crawl_symbol_chain (headers)
- object_headers *headers;
-{
- symbolS *symbolP;
-
- for (symbolP = symbol_rootP; symbolP; symbolP = symbol_next (symbolP))
- {
-#ifdef OBJ_COFF
- if (TC_S_IS_SYSPROC (symbolP))
- {
- /* second aux entry already contains the sysproc number */
- S_SET_NUMBER_AUXILIARY (symbolP, 2);
- S_SET_STORAGE_CLASS (symbolP, C_SCALL);
- S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
- continue;
- } /* rewrite sysproc */
-#endif /* OBJ_COFF */
-
- if (!TC_S_IS_BALNAME (symbolP) && !TC_S_IS_CALLNAME (symbolP))
- {
- continue;
- } /* Not a leafproc symbol */
-
- if (!S_IS_DEFINED (symbolP))
- {
- as_bad (_("leafproc symbol '%s' undefined"), S_GET_NAME (symbolP));
- } /* undefined leaf */
-
- if (TC_S_IS_CALLNAME (symbolP))
- {
- symbolS *balP = tc_get_bal_of_call (symbolP);
- if (S_IS_EXTERNAL (symbolP) != S_IS_EXTERNAL (balP))
- {
- S_SET_EXTERNAL (symbolP);
- S_SET_EXTERNAL (balP);
- as_warn (_("Warning: making leafproc entries %s and %s both global\n"),
- S_GET_NAME (symbolP), S_GET_NAME (balP));
- } /* externality mismatch */
- } /* if callname */
- } /* walk the symbol chain */
-}
-
-#endif /* ! BFD_ASSEMBLER */
-
/* For aout or bout, the bal immediately follows the call.
For coff, we cheat and store a pointer to the bal symbol in the
#endif
void
-tc_set_bal_of_call (callP, balP)
- symbolS *callP;
- symbolS *balP;
+tc_set_bal_of_call (symbolS *callP ATTRIBUTE_UNUSED,
+ symbolS *balP ATTRIBUTE_UNUSED)
{
know (TC_S_IS_CALLNAME (callP));
know (TC_S_IS_BALNAME (balP));
#ifdef OBJ_ABOUT
/* If the 'bal' entry doesn't immediately follow the 'call'
- * symbol, unlink it from the symbol list and re-insert it.
- */
+ symbol, unlink it from the symbol list and re-insert it. */
if (symbol_next (callP) != balP)
{
symbol_remove (balP, &symbol_rootP, &symbol_lastP);
}
symbolS *
-tc_get_bal_of_call (callP)
- symbolS *callP;
+tc_get_bal_of_call (symbolS *callP ATTRIBUTE_UNUSED)
{
symbolS *retval;
know (TC_S_IS_BALNAME (retval));
return retval;
-} /* _tc_get_bal_of_call() */
+}
+#ifdef OBJ_COFF
void
-tc_coff_symbol_emit_hook (symbolP)
- symbolS *symbolP;
+tc_coff_symbol_emit_hook (symbolS *symbolP ATTRIBUTE_UNUSED)
{
if (TC_S_IS_CALLNAME (symbolP))
{
-#ifdef OBJ_COFF
symbolS *balP = tc_get_bal_of_call (symbolP);
-#if 0
- /* second aux entry contains the bal entry point */
- S_SET_NUMBER_AUXILIARY (symbolP, 2);
-#endif
symbolP->sy_symbol.ost_auxent[1].x_bal.x_balntry = S_GET_VALUE (balP);
if (S_GET_STORAGE_CLASS (symbolP) == C_EXT)
S_SET_STORAGE_CLASS (symbolP, C_LEAFEXT);
else
S_SET_STORAGE_CLASS (symbolP, C_LEAFSTAT);
S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
- /* fix up the bal symbol */
+ /* Fix up the bal symbol. */
S_SET_STORAGE_CLASS (balP, C_LABEL);
-#endif /* OBJ_COFF */
- } /* only on calls */
+ }
}
+#endif /* OBJ_COFF */
void
-i960_handle_align (fragp)
- fragS *fragp;
+i960_handle_align (fragS *fragp ATTRIBUTE_UNUSED)
{
if (!linkrelax)
return;
#ifndef OBJ_BOUT
-
as_bad (_("option --link-relax is only supported in b.out format"));
linkrelax = 0;
return;
-
#else
/* The text section "ends" with another alignment reloc, to which we
}
int
-i960_validate_fix (fixP, this_segment_type, add_symbolPP)
- fixS *fixP;
- segT this_segment_type;
- symbolS **add_symbolPP;
+i960_validate_fix (fixS *fixP, segT this_segment_type ATTRIBUTE_UNUSED)
{
-#define add_symbolP (*add_symbolPP)
- if (fixP->fx_tcbit && TC_S_IS_CALLNAME (add_symbolP))
+ if (fixP->fx_tcbit && TC_S_IS_CALLNAME (fixP->fx_addsy))
{
/* Relocation should be done via the associated 'bal'
entry point symbol. */
-
- if (!TC_S_IS_BALNAME (tc_get_bal_of_call (add_symbolP)))
+ if (!TC_S_IS_BALNAME (tc_get_bal_of_call (fixP->fx_addsy)))
{
- as_bad (_("No 'bal' entry point for leafproc %s"),
- S_GET_NAME (add_symbolP));
- return 1;
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("No 'bal' entry point for leafproc %s"),
+ S_GET_NAME (fixP->fx_addsy));
+ return 0;
}
- fixP->fx_addsy = add_symbolP = tc_get_bal_of_call (add_symbolP);
+ fixP->fx_addsy = tc_get_bal_of_call (fixP->fx_addsy);
}
-#if 0
- /* Still have to work out other conditions for these tests. */
- {
- if (fixP->fx_tcbit)
- {
- as_bad (_("callj to difference of two symbols"));
- return 1;
- }
- reloc_callj (fixP);
- if ((int) fixP->fx_bit_fixP == 13)
- {
- /* This is a COBR instruction. They have only a 13-bit
- displacement and are only to be used for local branches:
- flag as error, don't generate relocation. */
- as_bad (_("can't use COBR format with external label"));
- fixP->fx_addsy = NULL; /* No relocations please. */
- return 1;
- }
- }
-#endif
-#undef add_symbolP
- return 0;
-}
-#ifdef BFD_ASSEMBLER
+ return 1;
+}
/* From cgen.c: */
static short
-tc_bfd_fix2rtype (fixP)
- fixS *fixP;
+tc_bfd_fix2rtype (fixS *fixP)
{
-#if 0
- if (fixP->fx_bsr)
- abort ();
-#endif
-
if (fixP->fx_pcrel == 0 && fixP->fx_size == 4)
return BFD_RELOC_32;
FIXME: To what extent can we get all relevant targets to use this? */
arelent *
-tc_gen_reloc (section, fixP)
- asection *section;
- fixS *fixP;
+tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixP)
{
arelent * reloc;
- reloc = (arelent *) xmalloc (sizeof (arelent));
+ reloc = xmalloc (sizeof (arelent));
- /* HACK: Is this right? */
+ /* HACK: Is this right? */
fixP->fx_r_type = tc_bfd_fix2rtype (fixP);
reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type);
- if (reloc->howto == (reloc_howto_type *) NULL)
+ if (reloc->howto == NULL)
{
as_bad_where (fixP->fx_file, fixP->fx_line,
- "internal error: can't export reloc type %d (`%s')",
+ _("internal error: can't export reloc type %d (`%s')"),
fixP->fx_r_type,
bfd_get_reloc_code_name (fixP->fx_r_type));
return NULL;
}
- assert (!fixP->fx_pcrel == !reloc->howto->pc_relative);
+ gas_assert (!fixP->fx_pcrel == !reloc->howto->pc_relative);
- reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy);
reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
reloc->addend = fixP->fx_addnumber;
/* end from cgen.c */
-#endif /* BFD_ASSEMBLER */
+const pseudo_typeS md_pseudo_table[] =
+{
+ {"bss", s_lcomm, 1},
+ {"endian", s_endian, 0},
+ {"extended", float_cons, 't'},
+ {"leafproc", parse_po, S_LEAFPROC},
+ {"sysproc", parse_po, S_SYSPROC},
+
+ {"word", cons, 4},
+ {"quad", cons, 16},
-/* end of tc-i960.c */
+ {0, 0, 0}
+};