/* tc-arm.c -- Assemble for the ARM
- Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000 Free Software Foundation, Inc.
+ Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
Contributed by Richard Earnshaw (rwe@pegasus.esprit.ec.org)
Modified by David Taylor (dtaylor@armltd.co.uk)
#define NO_RELOC 0
#include "as.h"
-/* need TARGET_CPU */
+/* Need TARGET_CPU. */
#include "config.h"
#include "subsegs.h"
#include "obstack.h"
#ifdef OBJ_ELF
#include "elf/arm.h"
+#include "dwarf2dbg.h"
#endif
/* Types of processor to assemble for. */
#define ARM_3 0x00000004
#define ARM_250 ARM_3
#define ARM_6 0x00000008
-#define ARM_7 ARM_6 /* same core instruction set */
-#define ARM_8 ARM_6 /* same core instruction set */
-#define ARM_9 ARM_6 /* same core instruction set */
+#define ARM_7 ARM_6 /* Same core instruction set. */
+#define ARM_8 ARM_6 /* Same core instruction set. */
+#define ARM_9 ARM_6 /* Same core instruction set. */
#define ARM_CPU_MASK 0x0000000f
-/* The following bitmasks control CPU extensions (ARM7 onwards): */
-#define ARM_LONGMUL 0x00000010 /* allow long multiplies */
-#define ARM_HALFWORD 0x00000020 /* allow half word loads */
-#define ARM_THUMB 0x00000040 /* allow BX instruction */
-#define ARM_EXT_V5 0x00000080 /* allow CLZ etc */
+/* The following bitmasks control CPU extensions (ARM7 onwards): */
+#define ARM_EXT_LONGMUL 0x00000010 /* Allow long multiplies. */
+#define ARM_EXT_HALFWORD 0x00000020 /* Allow half word loads. */
+#define ARM_EXT_THUMB 0x00000040 /* Allow BX instruction. */
+#define ARM_EXT_V5 0x00000080 /* Allow CLZ, etc. */
+#define ARM_EXT_V5E 0x00000100 /* "El Segundo". */
+#define ARM_EXT_XSCALE 0x00000200 /* Allow MIA etc. */
/* Architectures are the sum of the base and extensions. */
-#define ARM_ARCH_V4 (ARM_7 | ARM_LONGMUL | ARM_HALFWORD)
-#define ARM_ARCH_V4T (ARM_ARCH_V4 | ARM_THUMB)
+#define ARM_ARCH_V3M ARM_EXT_LONGMUL
+#define ARM_ARCH_V4 (ARM_ARCH_V3M | ARM_EXT_HALFWORD)
+#define ARM_ARCH_V4T (ARM_ARCH_V4 | ARM_EXT_THUMB)
#define ARM_ARCH_V5 (ARM_ARCH_V4 | ARM_EXT_V5)
-#define ARM_ARCH_V5T (ARM_ARCH_V5 | ARM_THUMB)
+#define ARM_ARCH_V5T (ARM_ARCH_V5 | ARM_EXT_THUMB)
+#define ARM_ARCH_V5TE (ARM_ARCH_V5T | ARM_EXT_V5E)
+#define ARM_ARCH_XSCALE (ARM_ARCH_V5TE | ARM_EXT_XSCALE)
/* Some useful combinations: */
#define ARM_ANY 0x00ffffff
#define ARM_2UP (ARM_ANY - ARM_1)
-#define ARM_ALL ARM_2UP /* Not arm1 only */
+#define ARM_ALL ARM_2UP /* Not arm1 only. */
#define ARM_3UP 0x00fffffc
-#define ARM_6UP 0x00fffff8 /* Includes ARM7 */
+#define ARM_6UP 0x00fffff8 /* Includes ARM7. */
#define FPU_CORE 0x80000000
#define FPU_FPA10 0x40000000
#define FPU_FPA11 0x40000000
#define FPU_NONE 0
-/* Some useful combinations */
-#define FPU_ALL 0xff000000 /* Note this is ~ARM_ANY */
-#define FPU_MEMMULTI 0x7f000000 /* Not fpu_core */
+/* Some useful combinations. */
+#define FPU_ALL 0xff000000 /* Note this is ~ARM_ANY. */
+#define FPU_MEMMULTI 0x7f000000 /* Not fpu_core. */
-
#ifndef CPU_DEFAULT
+#if defined __XSCALE__
+#define CPU_DEFAULT (ARM_9 | ARM_ARCH_XSCALE)
+#else
#if defined __thumb__
-#define CPU_DEFAULT (ARM_ARCH_V4 | ARM_THUMB)
+#define CPU_DEFAULT (ARM_7 | ARM_ARCH_V4T)
#else
-#define CPU_DEFAULT ARM_ALL
+#define CPU_DEFAULT ARM_ALL
+#endif
#endif
#endif
#endif
#define streq(a, b) (strcmp (a, b) == 0)
-#define skip_whitespace(str) while (* (str) == ' ') ++ (str)
+#define skip_whitespace(str) while (*(str) == ' ') ++(str)
-static unsigned long cpu_variant = CPU_DEFAULT | FPU_DEFAULT;
+static unsigned long cpu_variant = CPU_DEFAULT | FPU_DEFAULT;
static int target_oabi = 0;
#if defined OBJ_COFF || defined OBJ_ELF
-/* Flags stored in private area of BFD structure */
-static boolean uses_apcs_26 = false;
-static boolean support_interwork = false;
-static boolean uses_apcs_float = false;
-static boolean pic_code = false;
+/* Flags stored in private area of BFD structure. */
+static boolean uses_apcs_26 = false;
+static boolean atpcs = false;
+static boolean support_interwork = false;
+static boolean uses_apcs_float = false;
+static boolean pic_code = false;
#endif
/* This array holds the chars that always start a comment. If the
/* Also note that comments like this one will always work. */
CONST char line_comment_chars[] = "#";
-#ifdef TE_LINUX
CONST char line_separator_chars[] = ";";
-#else
-CONST char line_separator_chars[] = "";
-#endif
/* Chars that can be used to separate mant
from exp in floating point numbers. */
CONST char EXP_CHARS[] = "eE";
-/* Chars that mean this number is a floating point constant */
-/* As in 0f12.456 */
-/* or 0d1.2345e12 */
+/* Chars that mean this number is a floating point constant. */
+/* As in 0f12.456 */
+/* or 0d1.2345e12 */
CONST char FLT_CHARS[] = "rRsSfFdDxXeEpP";
#define is_immediate_prefix(C) ((C) == '#' || (C) == '$')
#ifdef OBJ_ELF
-symbolS * GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */
+/* Pre-defined "_GLOBAL_OFFSET_TABLE_" */
+symbolS * GOT_symbol;
#endif
-CONST int md_reloc_size = 8; /* Size of relocation record */
+/* Size of relocation record. */
+CONST int md_reloc_size = 8;
+
+/* 0: assemble for ARM,
+ 1: assemble for Thumb,
+ 2: assemble for Thumb even though target CPU does not support thumb
+ instructions. */
+static int thumb_mode = 0;
-static int thumb_mode = 0; /* 0: assemble for ARM, 1: assemble for Thumb,
- 2: assemble for Thumb even though target cpu
- does not support thumb instructions. */
typedef struct arm_fix
{
int thumb_mode;
int suffix;
int size;
struct
- {
- bfd_reloc_code_real_type type;
- expressionS exp;
- int pc_rel;
- } reloc;
+ {
+ bfd_reloc_code_real_type type;
+ expressionS exp;
+ int pc_rel;
+ } reloc;
};
struct arm_it inst;
-struct asm_shift
+enum asm_shift_index
{
- CONST char * template;
- unsigned long value;
+ SHIFT_LSL = 0,
+ SHIFT_LSR,
+ SHIFT_ASR,
+ SHIFT_ROR,
+ SHIFT_RRX
+};
+
+struct asm_shift_properties
+{
+ enum asm_shift_index index;
+ unsigned long bit_field;
+ unsigned int allows_0 : 1;
+ unsigned int allows_32 : 1;
+};
+
+static const struct asm_shift_properties shift_properties [] =
+{
+ { SHIFT_LSL, 0, 1, 0},
+ { SHIFT_LSR, 0x20, 0, 1},
+ { SHIFT_ASR, 0x40, 0, 1},
+ { SHIFT_ROR, 0x60, 0, 0},
+ { SHIFT_RRX, 0x60, 0, 0}
};
-static CONST struct asm_shift shift[] =
-{
- {"asl", 0},
- {"lsl", 0},
- {"lsr", 0x00000020},
- {"asr", 0x00000040},
- {"ror", 0x00000060},
- {"rrx", 0x00000060},
- {"ASL", 0},
- {"LSL", 0},
- {"LSR", 0x00000020},
- {"ASR", 0x00000040},
- {"ROR", 0x00000060},
- {"RRX", 0x00000060}
+struct asm_shift_name
+{
+ const char * name;
+ const struct asm_shift_properties * properties;
+};
+
+static const struct asm_shift_name shift_names [] =
+{
+ { "asl", shift_properties + SHIFT_LSL },
+ { "lsl", shift_properties + SHIFT_LSL },
+ { "lsr", shift_properties + SHIFT_LSR },
+ { "asr", shift_properties + SHIFT_ASR },
+ { "ror", shift_properties + SHIFT_ROR },
+ { "rrx", shift_properties + SHIFT_RRX },
+ { "ASL", shift_properties + SHIFT_LSL },
+ { "LSL", shift_properties + SHIFT_LSL },
+ { "LSR", shift_properties + SHIFT_LSR },
+ { "ASR", shift_properties + SHIFT_ASR },
+ { "ROR", shift_properties + SHIFT_ROR },
+ { "RRX", shift_properties + SHIFT_RRX }
};
#define NO_SHIFT_RESTRICT 1
#define NUM_FLOAT_VALS 8
-CONST char * fp_const[] =
+CONST char * fp_const[] =
{
"0.0", "1.0", "2.0", "3.0", "4.0", "5.0", "0.5", "10.0", 0
};
#define CP_T_UD 0x00800000
#define CP_T_WB 0x00200000
-#define CONDS_BIT (0x00100000)
-#define LOAD_BIT (0x00100000)
-#define TRANS_BIT (0x00200000)
+#define CONDS_BIT 0x00100000
+#define LOAD_BIT 0x00100000
+#define TRANS_BIT 0x00200000
+
+#define DOUBLE_LOAD_FLAG 0x00000001
struct asm_cond
{
/* This is to save a hash look-up in the common case. */
#define COND_ALWAYS 0xe0000000
-static CONST struct asm_cond conds[] =
+static CONST struct asm_cond conds[] =
{
{"eq", 0x00000000},
{"ne", 0x10000000},
the set_bits: */
struct asm_flg
{
- CONST char * template; /* Basic flag string */
- unsigned long set_bits; /* Bits to set */
+ CONST char * template; /* Basic flag string. */
+ unsigned long set_bits; /* Bits to set. */
};
static CONST struct asm_flg s_flag[] =
static CONST struct asm_flg ldr_flags[] =
{
+ {"d", DOUBLE_LOAD_FLAG},
{"b", 0x00400000},
{"t", TRANS_BIT},
{"bt", 0x00400000 | TRANS_BIT},
static CONST struct asm_flg str_flags[] =
{
+ {"d", DOUBLE_LOAD_FLAG},
{"b", 0x00400000},
{"t", TRANS_BIT},
{"bt", 0x00400000 | TRANS_BIT},
{"ed", 0x01800000},
{"fd", 0x00800000},
{"ea", 0x01000000},
- {"fa", 0x08000000},
+ {"fa", 0x00000000},
{"ib", 0x01800000},
{"ia", 0x00800000},
{"db", 0x01000000},
- {"da", 0x08000000},
+ {"da", 0x00000000},
{NULL, 0}
};
static CONST struct asm_flg stm_flags[] =
{
- {"ed", 0x08000000},
+ {"ed", 0x00000000},
{"fd", 0x01000000},
{"ea", 0x00800000},
{"fa", 0x01800000},
{"ib", 0x01800000},
{"ia", 0x00800000},
{"db", 0x01000000},
- {"da", 0x08000000},
+ {"da", 0x00000000},
{NULL, 0}
};
unsigned long field;
};
-#define SPSR_BIT (1 << 22) /* The bit that distnguishes CPSR and SPSR. */
-#define PSR_SHIFT 16 /* How many bits to shift the PSR_xxx bits up by. */
+/* The bit that distnguishes CPSR and SPSR. */
+#define SPSR_BIT (1 << 22)
+
+/* How many bits to shift the PSR_xxx bits up by. */
+#define PSR_SHIFT 16
#define PSR_c (1 << 0)
#define PSR_x (1 << 1)
{"CPSR_flg", true, PSR_f},
{"CPSR_f", true, PSR_f},
{"SPSR_flg", false, PSR_f},
- {"SPSR_f", false, PSR_f},
+ {"SPSR_f", false, PSR_f},
{"CPSR_c", true, PSR_c},
{"CPSR_ctl", true, PSR_c},
{"SPSR_c", false, PSR_c},
{"CPSR_s", true, PSR_s},
{"SPSR_x", false, PSR_x},
{"SPSR_s", false, PSR_s},
- /* For backwards compatability with older toolchain we also
- support lower case versions of some of these flags. */
- {"cpsr", true, PSR_c | PSR_f},
- {"cpsr_all", true, PSR_c | PSR_f},
- {"spsr", false, PSR_c | PSR_f},
- {"spsr_all", false, PSR_c | PSR_f},
- {"cpsr_flg", true, PSR_f},
- {"cpsr_f", true, PSR_f},
- {"spsr_flg", false, PSR_f},
- {"spsr_f", false, PSR_f},
- {"cpsr_c", true, PSR_c},
- {"cpsr_ctl", true, PSR_c},
- {"spsr_c", false, PSR_c},
- {"spsr_ctl", false, PSR_c}
+ /* Combinations of flags. */
+ {"CPSR_fs", true, PSR_f | PSR_s},
+ {"CPSR_fx", true, PSR_f | PSR_x},
+ {"CPSR_fc", true, PSR_f | PSR_c},
+ {"CPSR_sf", true, PSR_s | PSR_f},
+ {"CPSR_sx", true, PSR_s | PSR_x},
+ {"CPSR_sc", true, PSR_s | PSR_c},
+ {"CPSR_xf", true, PSR_x | PSR_f},
+ {"CPSR_xs", true, PSR_x | PSR_s},
+ {"CPSR_xc", true, PSR_x | PSR_c},
+ {"CPSR_cf", true, PSR_c | PSR_f},
+ {"CPSR_cs", true, PSR_c | PSR_s},
+ {"CPSR_cx", true, PSR_c | PSR_x},
+ {"CPSR_fsx", true, PSR_f | PSR_s | PSR_x},
+ {"CPSR_fsc", true, PSR_f | PSR_s | PSR_c},
+ {"CPSR_fxs", true, PSR_f | PSR_x | PSR_s},
+ {"CPSR_fxc", true, PSR_f | PSR_x | PSR_c},
+ {"CPSR_fcs", true, PSR_f | PSR_c | PSR_s},
+ {"CPSR_fcx", true, PSR_f | PSR_c | PSR_x},
+ {"CPSR_sfx", true, PSR_s | PSR_f | PSR_x},
+ {"CPSR_sfc", true, PSR_s | PSR_f | PSR_c},
+ {"CPSR_sxf", true, PSR_s | PSR_x | PSR_f},
+ {"CPSR_sxc", true, PSR_s | PSR_x | PSR_c},
+ {"CPSR_scf", true, PSR_s | PSR_c | PSR_f},
+ {"CPSR_scx", true, PSR_s | PSR_c | PSR_x},
+ {"CPSR_xfs", true, PSR_x | PSR_f | PSR_s},
+ {"CPSR_xfc", true, PSR_x | PSR_f | PSR_c},
+ {"CPSR_xsf", true, PSR_x | PSR_s | PSR_f},
+ {"CPSR_xsc", true, PSR_x | PSR_s | PSR_c},
+ {"CPSR_xcf", true, PSR_x | PSR_c | PSR_f},
+ {"CPSR_xcs", true, PSR_x | PSR_c | PSR_s},
+ {"CPSR_cfs", true, PSR_c | PSR_f | PSR_s},
+ {"CPSR_cfx", true, PSR_c | PSR_f | PSR_x},
+ {"CPSR_csf", true, PSR_c | PSR_s | PSR_f},
+ {"CPSR_csx", true, PSR_c | PSR_s | PSR_x},
+ {"CPSR_cxf", true, PSR_c | PSR_x | PSR_f},
+ {"CPSR_cxs", true, PSR_c | PSR_x | PSR_s},
+ {"CPSR_fsxc", true, PSR_f | PSR_s | PSR_x | PSR_c},
+ {"CPSR_fscx", true, PSR_f | PSR_s | PSR_c | PSR_x},
+ {"CPSR_fxsc", true, PSR_f | PSR_x | PSR_s | PSR_c},
+ {"CPSR_fxcs", true, PSR_f | PSR_x | PSR_c | PSR_s},
+ {"CPSR_fcsx", true, PSR_f | PSR_c | PSR_s | PSR_x},
+ {"CPSR_fcxs", true, PSR_f | PSR_c | PSR_x | PSR_s},
+ {"CPSR_sfxc", true, PSR_s | PSR_f | PSR_x | PSR_c},
+ {"CPSR_sfcx", true, PSR_s | PSR_f | PSR_c | PSR_x},
+ {"CPSR_sxfc", true, PSR_s | PSR_x | PSR_f | PSR_c},
+ {"CPSR_sxcf", true, PSR_s | PSR_x | PSR_c | PSR_f},
+ {"CPSR_scfx", true, PSR_s | PSR_c | PSR_f | PSR_x},
+ {"CPSR_scxf", true, PSR_s | PSR_c | PSR_x | PSR_f},
+ {"CPSR_xfsc", true, PSR_x | PSR_f | PSR_s | PSR_c},
+ {"CPSR_xfcs", true, PSR_x | PSR_f | PSR_c | PSR_s},
+ {"CPSR_xsfc", true, PSR_x | PSR_s | PSR_f | PSR_c},
+ {"CPSR_xscf", true, PSR_x | PSR_s | PSR_c | PSR_f},
+ {"CPSR_xcfs", true, PSR_x | PSR_c | PSR_f | PSR_s},
+ {"CPSR_xcsf", true, PSR_x | PSR_c | PSR_s | PSR_f},
+ {"CPSR_cfsx", true, PSR_c | PSR_f | PSR_s | PSR_x},
+ {"CPSR_cfxs", true, PSR_c | PSR_f | PSR_x | PSR_s},
+ {"CPSR_csfx", true, PSR_c | PSR_s | PSR_f | PSR_x},
+ {"CPSR_csxf", true, PSR_c | PSR_s | PSR_x | PSR_f},
+ {"CPSR_cxfs", true, PSR_c | PSR_x | PSR_f | PSR_s},
+ {"CPSR_cxsf", true, PSR_c | PSR_x | PSR_s | PSR_f},
+ {"SPSR_fs", false, PSR_f | PSR_s},
+ {"SPSR_fx", false, PSR_f | PSR_x},
+ {"SPSR_fc", false, PSR_f | PSR_c},
+ {"SPSR_sf", false, PSR_s | PSR_f},
+ {"SPSR_sx", false, PSR_s | PSR_x},
+ {"SPSR_sc", false, PSR_s | PSR_c},
+ {"SPSR_xf", false, PSR_x | PSR_f},
+ {"SPSR_xs", false, PSR_x | PSR_s},
+ {"SPSR_xc", false, PSR_x | PSR_c},
+ {"SPSR_cf", false, PSR_c | PSR_f},
+ {"SPSR_cs", false, PSR_c | PSR_s},
+ {"SPSR_cx", false, PSR_c | PSR_x},
+ {"SPSR_fsx", false, PSR_f | PSR_s | PSR_x},
+ {"SPSR_fsc", false, PSR_f | PSR_s | PSR_c},
+ {"SPSR_fxs", false, PSR_f | PSR_x | PSR_s},
+ {"SPSR_fxc", false, PSR_f | PSR_x | PSR_c},
+ {"SPSR_fcs", false, PSR_f | PSR_c | PSR_s},
+ {"SPSR_fcx", false, PSR_f | PSR_c | PSR_x},
+ {"SPSR_sfx", false, PSR_s | PSR_f | PSR_x},
+ {"SPSR_sfc", false, PSR_s | PSR_f | PSR_c},
+ {"SPSR_sxf", false, PSR_s | PSR_x | PSR_f},
+ {"SPSR_sxc", false, PSR_s | PSR_x | PSR_c},
+ {"SPSR_scf", false, PSR_s | PSR_c | PSR_f},
+ {"SPSR_scx", false, PSR_s | PSR_c | PSR_x},
+ {"SPSR_xfs", false, PSR_x | PSR_f | PSR_s},
+ {"SPSR_xfc", false, PSR_x | PSR_f | PSR_c},
+ {"SPSR_xsf", false, PSR_x | PSR_s | PSR_f},
+ {"SPSR_xsc", false, PSR_x | PSR_s | PSR_c},
+ {"SPSR_xcf", false, PSR_x | PSR_c | PSR_f},
+ {"SPSR_xcs", false, PSR_x | PSR_c | PSR_s},
+ {"SPSR_cfs", false, PSR_c | PSR_f | PSR_s},
+ {"SPSR_cfx", false, PSR_c | PSR_f | PSR_x},
+ {"SPSR_csf", false, PSR_c | PSR_s | PSR_f},
+ {"SPSR_csx", false, PSR_c | PSR_s | PSR_x},
+ {"SPSR_cxf", false, PSR_c | PSR_x | PSR_f},
+ {"SPSR_cxs", false, PSR_c | PSR_x | PSR_s},
+ {"SPSR_fsxc", false, PSR_f | PSR_s | PSR_x | PSR_c},
+ {"SPSR_fscx", false, PSR_f | PSR_s | PSR_c | PSR_x},
+ {"SPSR_fxsc", false, PSR_f | PSR_x | PSR_s | PSR_c},
+ {"SPSR_fxcs", false, PSR_f | PSR_x | PSR_c | PSR_s},
+ {"SPSR_fcsx", false, PSR_f | PSR_c | PSR_s | PSR_x},
+ {"SPSR_fcxs", false, PSR_f | PSR_c | PSR_x | PSR_s},
+ {"SPSR_sfxc", false, PSR_s | PSR_f | PSR_x | PSR_c},
+ {"SPSR_sfcx", false, PSR_s | PSR_f | PSR_c | PSR_x},
+ {"SPSR_sxfc", false, PSR_s | PSR_x | PSR_f | PSR_c},
+ {"SPSR_sxcf", false, PSR_s | PSR_x | PSR_c | PSR_f},
+ {"SPSR_scfx", false, PSR_s | PSR_c | PSR_f | PSR_x},
+ {"SPSR_scxf", false, PSR_s | PSR_c | PSR_x | PSR_f},
+ {"SPSR_xfsc", false, PSR_x | PSR_f | PSR_s | PSR_c},
+ {"SPSR_xfcs", false, PSR_x | PSR_f | PSR_c | PSR_s},
+ {"SPSR_xsfc", false, PSR_x | PSR_s | PSR_f | PSR_c},
+ {"SPSR_xscf", false, PSR_x | PSR_s | PSR_c | PSR_f},
+ {"SPSR_xcfs", false, PSR_x | PSR_c | PSR_f | PSR_s},
+ {"SPSR_xcsf", false, PSR_x | PSR_c | PSR_s | PSR_f},
+ {"SPSR_cfsx", false, PSR_c | PSR_f | PSR_s | PSR_x},
+ {"SPSR_cfxs", false, PSR_c | PSR_f | PSR_x | PSR_s},
+ {"SPSR_csfx", false, PSR_c | PSR_s | PSR_f | PSR_x},
+ {"SPSR_csxf", false, PSR_c | PSR_s | PSR_x | PSR_f},
+ {"SPSR_cxfs", false, PSR_c | PSR_x | PSR_f | PSR_s},
+ {"SPSR_cxsf", false, PSR_c | PSR_x | PSR_s | PSR_f},
};
/* Functions called by parser. */
-/* ARM instructions */
+/* ARM instructions. */
static void do_arit PARAMS ((char *, unsigned long));
static void do_cmp PARAMS ((char *, unsigned long));
static void do_mov PARAMS ((char *, unsigned long));
static void do_ldmstm PARAMS ((char *, unsigned long));
static void do_branch PARAMS ((char *, unsigned long));
static void do_swi PARAMS ((char *, unsigned long));
-/* Pseudo Op codes */
+/* Pseudo Op codes. */
static void do_adr PARAMS ((char *, unsigned long));
static void do_adrl PARAMS ((char *, unsigned long));
static void do_nop PARAMS ((char *, unsigned long));
-/* ARM 2 */
+/* ARM 2. */
static void do_mul PARAMS ((char *, unsigned long));
static void do_mla PARAMS ((char *, unsigned long));
-/* ARM 3 */
+/* ARM 3. */
static void do_swap PARAMS ((char *, unsigned long));
-/* ARM 6 */
+/* ARM 6. */
static void do_msr PARAMS ((char *, unsigned long));
static void do_mrs PARAMS ((char *, unsigned long));
-/* ARM 7M */
+/* ARM 7M. */
static void do_mull PARAMS ((char *, unsigned long));
-/* ARM THUMB */
+/* ARM THUMB. */
static void do_bx PARAMS ((char *, unsigned long));
-
-/* Coprocessor Instructions */
+/* ARM_EXT_XScale. */
+static void do_mia PARAMS ((char *, unsigned long));
+static void do_mar PARAMS ((char *, unsigned long));
+static void do_mra PARAMS ((char *, unsigned long));
+static void do_pld PARAMS ((char *, unsigned long));
+static void do_ldrd PARAMS ((char *, unsigned long));
+
+/* ARM_EXT_V5. */
+static void do_blx PARAMS ((char *, unsigned long));
+static void do_bkpt PARAMS ((char *, unsigned long));
+static void do_clz PARAMS ((char *, unsigned long));
+static void do_lstc2 PARAMS ((char *, unsigned long));
+static void do_cdp2 PARAMS ((char *, unsigned long));
+static void do_co_reg2 PARAMS ((char *, unsigned long));
+
+static void do_t_blx PARAMS ((char *));
+static void do_t_bkpt PARAMS ((char *));
+
+/* ARM_EXT_V5E. */
+static void do_smla PARAMS ((char *, unsigned long));
+static void do_smlal PARAMS ((char *, unsigned long));
+static void do_smul PARAMS ((char *, unsigned long));
+static void do_qadd PARAMS ((char *, unsigned long));
+static void do_co_reg2c PARAMS ((char *, unsigned long));
+
+/* Coprocessor Instructions. */
static void do_cdp PARAMS ((char *, unsigned long));
static void do_lstc PARAMS ((char *, unsigned long));
static void do_co_reg PARAMS ((char *, unsigned long));
take 2: */
#define INSN_SIZE 4
-/* LONGEST_INST is the longest basic instruction name without conditions or
- flags. ARM7M has 4 of length 5. */
+/* LONGEST_INST is the longest basic instruction name without
+ conditions or flags. ARM7M has 4 of length 5. El Segundo
+ has one basic instruction name of length 7 (SMLALxy). */
+#define LONGEST_INST 7
-#define LONGEST_INST 5
+struct asm_opcode
+{
+ /* Basic string to match. */
+ CONST char * template;
+ /* Basic instruction code. */
+ unsigned long value;
-struct asm_opcode
-{
- CONST char * template; /* Basic string to match */
- unsigned long value; /* Basic instruction code */
+ /* Compulsory suffix that must follow conds. If "", then the
+ instruction is not conditional and must have no suffix. */
+ CONST char * comp_suffix;
- /* Compulsory suffix that must follow conds. If "", then the
- instruction is not conditional and must have no suffix. */
- CONST char * comp_suffix;
+ /* Bits to toggle if flag 'n' set. */
+ CONST struct asm_flg * flags;
- CONST struct asm_flg * flags; /* Bits to toggle if flag 'n' set */
- unsigned long variants; /* Which CPU variants this exists for */
- /* Function to call to parse args */
- void (* parms) PARAMS ((char *, unsigned long));
+ /* Which CPU variants this exists for. */
+ unsigned long variants;
+
+ /* Function to call to parse args. */
+ void (* parms) PARAMS ((char *, unsigned long));
};
-static CONST struct asm_opcode insns[] =
-{
-/* ARM Instructions */
+static CONST struct asm_opcode insns[] =
+{
+/* Intel XScale extensions to ARM V5 ISA. */
+ {"mia", 0x0e200010, NULL, NULL, ARM_EXT_XSCALE, do_mia},
+ {"miaph", 0x0e280010, NULL, NULL, ARM_EXT_XSCALE, do_mia},
+ {"miabb", 0x0e2c0010, NULL, NULL, ARM_EXT_XSCALE, do_mia},
+ {"miabt", 0x0e2d0010, NULL, NULL, ARM_EXT_XSCALE, do_mia},
+ {"miatb", 0x0e2e0010, NULL, NULL, ARM_EXT_XSCALE, do_mia},
+ {"miatt", 0x0e2f0010, NULL, NULL, ARM_EXT_XSCALE, do_mia},
+ {"mar", 0x0c400000, NULL, NULL, ARM_EXT_XSCALE, do_mar},
+ {"mra", 0x0c500000, NULL, NULL, ARM_EXT_XSCALE, do_mra},
+ {"pld", 0xf450f000, "", NULL, ARM_EXT_XSCALE, do_pld},
+ {"ldr", 0x000000d0, NULL, ldr_flags, ARM_ANY, do_ldrd},
+ {"str", 0x000000f0, NULL, str_flags, ARM_ANY, do_ldrd},
+
+/* ARM Instructions. */
{"and", 0x00000000, NULL, s_flag, ARM_ANY, do_arit},
{"eor", 0x00200000, NULL, s_flag, ARM_ANY, do_arit},
{"sub", 0x00400000, NULL, s_flag, ARM_ANY, do_arit},
{"bl", 0x0bfffffe, NULL, NULL, ARM_ANY, do_branch},
{"b", 0x0afffffe, NULL, NULL, ARM_ANY, do_branch},
#endif
-
-/* Pseudo ops */
+
+/* Pseudo ops. */
{"adr", 0x028f0000, NULL, NULL, ARM_ANY, do_adr},
{"adrl", 0x028f0000, NULL, NULL, ARM_ANY, do_adrl},
{"nop", 0x01a00000, NULL, NULL, ARM_ANY, do_nop},
-/* ARM 2 multiplies */
+/* ARM 2 multiplies. */
{"mul", 0x00000090, NULL, s_flag, ARM_2UP, do_mul},
{"mla", 0x00200090, NULL, s_flag, ARM_2UP, do_mla},
-/* ARM 3 - swp instructions */
+/* ARM 3 - swp instructions. */
{"swp", 0x01000090, NULL, byte_flag, ARM_3UP, do_swap},
-/* ARM 6 Coprocessor instructions */
+/* ARM 6 Coprocessor instructions. */
{"mrs", 0x010f0000, NULL, NULL, ARM_6UP, do_mrs},
{"msr", 0x0120f000, NULL, NULL, ARM_6UP, do_msr},
/* ScottB: our code uses 0x0128f000 for msr.
NickC: but this is wrong because the bits 16 through 19 are
handled by the PSR_xxx defines above. */
-/* ARM 7M long multiplies - need signed/unsigned flags! */
- {"smull", 0x00c00090, NULL, s_flag, ARM_LONGMUL, do_mull},
- {"umull", 0x00800090, NULL, s_flag, ARM_LONGMUL, do_mull},
- {"smlal", 0x00e00090, NULL, s_flag, ARM_LONGMUL, do_mull},
- {"umlal", 0x00a00090, NULL, s_flag, ARM_LONGMUL, do_mull},
+/* ARM 7M long multiplies - need signed/unsigned flags! */
+ {"smull", 0x00c00090, NULL, s_flag, ARM_EXT_LONGMUL, do_mull},
+ {"umull", 0x00800090, NULL, s_flag, ARM_EXT_LONGMUL, do_mull},
+ {"smlal", 0x00e00090, NULL, s_flag, ARM_EXT_LONGMUL, do_mull},
+ {"umlal", 0x00a00090, NULL, s_flag, ARM_EXT_LONGMUL, do_mull},
-/* ARM THUMB interworking */
- {"bx", 0x012fff10, NULL, NULL, ARM_THUMB, do_bx},
+/* ARM THUMB interworking. */
+ {"bx", 0x012fff10, NULL, NULL, ARM_EXT_THUMB, do_bx},
-/* Floating point instructions */
+/* Floating point instructions. */
{"wfs", 0x0e200110, NULL, NULL, FPU_ALL, do_fp_ctrl},
{"rfs", 0x0e300110, NULL, NULL, FPU_ALL, do_fp_ctrl},
{"wfc", 0x0e400110, NULL, NULL, FPU_ALL, do_fp_ctrl},
{"stc", 0x0c000000, NULL, cplong_flag, ARM_2UP, do_lstc},
{"mcr", 0x0e000010, NULL, NULL, ARM_2UP, do_co_reg},
{"mrc", 0x0e100010, NULL, NULL, ARM_2UP, do_co_reg},
+
+/* ARM ISA extension 5. */
+/* Note: blx is actually 2 opcodes, so the .value is set dynamically.
+ And it's sometimes conditional and sometimes not. */
+ {"blx", 0, NULL, NULL, ARM_EXT_V5, do_blx},
+ {"clz", 0x016f0f10, NULL, NULL, ARM_EXT_V5, do_clz},
+ {"bkpt", 0xe1200070, "", NULL, ARM_EXT_V5, do_bkpt},
+ {"ldc2", 0xfc100000, "", cplong_flag, ARM_EXT_V5, do_lstc2},
+ {"stc2", 0xfc000000, "", cplong_flag, ARM_EXT_V5, do_lstc2},
+ {"cdp2", 0xfe000000, "", NULL, ARM_EXT_V5, do_cdp2},
+ {"mcr2", 0xfe000010, "", NULL, ARM_EXT_V5, do_co_reg2},
+ {"mrc2", 0xfe100010, "", NULL, ARM_EXT_V5, do_co_reg2},
+
+/* ARM ISA extension 5E, El Segundo. */
+ {"smlabb", 0x01000080, NULL, NULL, ARM_EXT_V5E, do_smla},
+ {"smlatb", 0x010000a0, NULL, NULL, ARM_EXT_V5E, do_smla},
+ {"smlabt", 0x010000c0, NULL, NULL, ARM_EXT_V5E, do_smla},
+ {"smlatt", 0x010000e0, NULL, NULL, ARM_EXT_V5E, do_smla},
+
+ {"smlawb", 0x01200080, NULL, NULL, ARM_EXT_V5E, do_smla},
+ {"smlawt", 0x012000c0, NULL, NULL, ARM_EXT_V5E, do_smla},
+
+ {"smlalbb",0x01400080, NULL, NULL, ARM_EXT_V5E, do_smlal},
+ {"smlaltb",0x014000a0, NULL, NULL, ARM_EXT_V5E, do_smlal},
+ {"smlalbt",0x014000c0, NULL, NULL, ARM_EXT_V5E, do_smlal},
+ {"smlaltt",0x014000e0, NULL, NULL, ARM_EXT_V5E, do_smlal},
+
+ {"smulbb", 0x01600080, NULL, NULL, ARM_EXT_V5E, do_smul},
+ {"smultb", 0x016000a0, NULL, NULL, ARM_EXT_V5E, do_smul},
+ {"smulbt", 0x016000c0, NULL, NULL, ARM_EXT_V5E, do_smul},
+ {"smultt", 0x016000e0, NULL, NULL, ARM_EXT_V5E, do_smul},
+
+ {"smulwb", 0x012000a0, NULL, NULL, ARM_EXT_V5E, do_smul},
+ {"smulwt", 0x012000e0, NULL, NULL, ARM_EXT_V5E, do_smul},
+
+ {"qadd", 0x01000050, NULL, NULL, ARM_EXT_V5E, do_qadd},
+ {"qdadd", 0x01400050, NULL, NULL, ARM_EXT_V5E, do_qadd},
+ {"qsub", 0x01200050, NULL, NULL, ARM_EXT_V5E, do_qadd},
+ {"qdsub", 0x01600050, NULL, NULL, ARM_EXT_V5E, do_qadd},
+
+ {"mcrr", 0x0c400000, NULL, NULL, ARM_EXT_V5E, do_co_reg2c},
+ {"mrrc", 0x0c500000, NULL, NULL, ARM_EXT_V5E, do_co_reg2c},
};
/* Defines for various bits that we will want to toggle. */
#define THUMB_HALFWORD 1
#define THUMB_BYTE 0
-struct thumb_opcode
+struct thumb_opcode
{
- CONST char * template; /* Basic string to match */
- unsigned long value; /* Basic instruction code */
- int size;
- unsigned long variants; /* Which CPU variants this exists for */
- void (* parms) PARAMS ((char *)); /* Function to call to parse args */
+ /* Basic string to match. */
+ CONST char * template;
+
+ /* Basic instruction code. */
+ unsigned long value;
+
+ int size;
+
+ /* Which CPU variants this exists for. */
+ unsigned long variants;
+
+ /* Function to call to parse args. */
+ void (* parms) PARAMS ((char *));
};
static CONST struct thumb_opcode tinsns[] =
{
- {"adc", 0x4140, 2, ARM_THUMB, do_t_arit},
- {"add", 0x0000, 2, ARM_THUMB, do_t_add},
- {"and", 0x4000, 2, ARM_THUMB, do_t_arit},
- {"asr", 0x0000, 2, ARM_THUMB, do_t_asr},
- {"b", T_OPCODE_BRANCH, 2, ARM_THUMB, do_t_branch12},
- {"beq", 0xd0fe, 2, ARM_THUMB, do_t_branch9},
- {"bne", 0xd1fe, 2, ARM_THUMB, do_t_branch9},
- {"bcs", 0xd2fe, 2, ARM_THUMB, do_t_branch9},
- {"bhs", 0xd2fe, 2, ARM_THUMB, do_t_branch9},
- {"bcc", 0xd3fe, 2, ARM_THUMB, do_t_branch9},
- {"bul", 0xd3fe, 2, ARM_THUMB, do_t_branch9},
- {"blo", 0xd3fe, 2, ARM_THUMB, do_t_branch9},
- {"bmi", 0xd4fe, 2, ARM_THUMB, do_t_branch9},
- {"bpl", 0xd5fe, 2, ARM_THUMB, do_t_branch9},
- {"bvs", 0xd6fe, 2, ARM_THUMB, do_t_branch9},
- {"bvc", 0xd7fe, 2, ARM_THUMB, do_t_branch9},
- {"bhi", 0xd8fe, 2, ARM_THUMB, do_t_branch9},
- {"bls", 0xd9fe, 2, ARM_THUMB, do_t_branch9},
- {"bge", 0xdafe, 2, ARM_THUMB, do_t_branch9},
- {"blt", 0xdbfe, 2, ARM_THUMB, do_t_branch9},
- {"bgt", 0xdcfe, 2, ARM_THUMB, do_t_branch9},
- {"ble", 0xddfe, 2, ARM_THUMB, do_t_branch9},
- {"bal", 0xdefe, 2, ARM_THUMB, do_t_branch9},
- {"bic", 0x4380, 2, ARM_THUMB, do_t_arit},
- {"bl", 0xf7fffffe, 4, ARM_THUMB, do_t_branch23},
- {"bx", 0x4700, 2, ARM_THUMB, do_t_bx},
- {"cmn", T_OPCODE_CMN, 2, ARM_THUMB, do_t_arit},
- {"cmp", 0x0000, 2, ARM_THUMB, do_t_compare},
- {"eor", 0x4040, 2, ARM_THUMB, do_t_arit},
- {"ldmia", 0xc800, 2, ARM_THUMB, do_t_ldmstm},
- {"ldr", 0x0000, 2, ARM_THUMB, do_t_ldr},
- {"ldrb", 0x0000, 2, ARM_THUMB, do_t_ldrb},
- {"ldrh", 0x0000, 2, ARM_THUMB, do_t_ldrh},
- {"ldrsb", 0x5600, 2, ARM_THUMB, do_t_lds},
- {"ldrsh", 0x5e00, 2, ARM_THUMB, do_t_lds},
- {"ldsb", 0x5600, 2, ARM_THUMB, do_t_lds},
- {"ldsh", 0x5e00, 2, ARM_THUMB, do_t_lds},
- {"lsl", 0x0000, 2, ARM_THUMB, do_t_lsl},
- {"lsr", 0x0000, 2, ARM_THUMB, do_t_lsr},
- {"mov", 0x0000, 2, ARM_THUMB, do_t_mov},
- {"mul", T_OPCODE_MUL, 2, ARM_THUMB, do_t_arit},
- {"mvn", T_OPCODE_MVN, 2, ARM_THUMB, do_t_arit},
- {"neg", T_OPCODE_NEG, 2, ARM_THUMB, do_t_arit},
- {"orr", 0x4300, 2, ARM_THUMB, do_t_arit},
- {"pop", 0xbc00, 2, ARM_THUMB, do_t_push_pop},
- {"push", 0xb400, 2, ARM_THUMB, do_t_push_pop},
- {"ror", 0x41c0, 2, ARM_THUMB, do_t_arit},
- {"sbc", 0x4180, 2, ARM_THUMB, do_t_arit},
- {"stmia", 0xc000, 2, ARM_THUMB, do_t_ldmstm},
- {"str", 0x0000, 2, ARM_THUMB, do_t_str},
- {"strb", 0x0000, 2, ARM_THUMB, do_t_strb},
- {"strh", 0x0000, 2, ARM_THUMB, do_t_strh},
- {"swi", 0xdf00, 2, ARM_THUMB, do_t_swi},
- {"sub", 0x0000, 2, ARM_THUMB, do_t_sub},
- {"tst", T_OPCODE_TST, 2, ARM_THUMB, do_t_arit},
- /* Pseudo ops: */
- {"adr", 0x0000, 2, ARM_THUMB, do_t_adr},
- {"nop", 0x46C0, 2, ARM_THUMB, do_t_nop}, /* mov r8,r8 */
+ {"adc", 0x4140, 2, ARM_EXT_THUMB, do_t_arit},
+ {"add", 0x0000, 2, ARM_EXT_THUMB, do_t_add},
+ {"and", 0x4000, 2, ARM_EXT_THUMB, do_t_arit},
+ {"asr", 0x0000, 2, ARM_EXT_THUMB, do_t_asr},
+ {"b", T_OPCODE_BRANCH, 2, ARM_EXT_THUMB, do_t_branch12},
+ {"beq", 0xd0fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bne", 0xd1fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bcs", 0xd2fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bhs", 0xd2fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bcc", 0xd3fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bul", 0xd3fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"blo", 0xd3fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bmi", 0xd4fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bpl", 0xd5fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bvs", 0xd6fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bvc", 0xd7fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bhi", 0xd8fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bls", 0xd9fe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bge", 0xdafe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"blt", 0xdbfe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bgt", 0xdcfe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"ble", 0xddfe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bal", 0xdefe, 2, ARM_EXT_THUMB, do_t_branch9},
+ {"bic", 0x4380, 2, ARM_EXT_THUMB, do_t_arit},
+ {"bl", 0xf7fffffe, 4, ARM_EXT_THUMB, do_t_branch23},
+ {"blx", 0, 0, ARM_EXT_V5, do_t_blx},
+ {"bkpt", 0xbe00, 2, ARM_EXT_V5, do_t_bkpt},
+ {"bx", 0x4700, 2, ARM_EXT_THUMB, do_t_bx},
+ {"cmn", T_OPCODE_CMN, 2, ARM_EXT_THUMB, do_t_arit},
+ {"cmp", 0x0000, 2, ARM_EXT_THUMB, do_t_compare},
+ {"eor", 0x4040, 2, ARM_EXT_THUMB, do_t_arit},
+ {"ldmia", 0xc800, 2, ARM_EXT_THUMB, do_t_ldmstm},
+ {"ldr", 0x0000, 2, ARM_EXT_THUMB, do_t_ldr},
+ {"ldrb", 0x0000, 2, ARM_EXT_THUMB, do_t_ldrb},
+ {"ldrh", 0x0000, 2, ARM_EXT_THUMB, do_t_ldrh},
+ {"ldrsb", 0x5600, 2, ARM_EXT_THUMB, do_t_lds},
+ {"ldrsh", 0x5e00, 2, ARM_EXT_THUMB, do_t_lds},
+ {"ldsb", 0x5600, 2, ARM_EXT_THUMB, do_t_lds},
+ {"ldsh", 0x5e00, 2, ARM_EXT_THUMB, do_t_lds},
+ {"lsl", 0x0000, 2, ARM_EXT_THUMB, do_t_lsl},
+ {"lsr", 0x0000, 2, ARM_EXT_THUMB, do_t_lsr},
+ {"mov", 0x0000, 2, ARM_EXT_THUMB, do_t_mov},
+ {"mul", T_OPCODE_MUL, 2, ARM_EXT_THUMB, do_t_arit},
+ {"mvn", T_OPCODE_MVN, 2, ARM_EXT_THUMB, do_t_arit},
+ {"neg", T_OPCODE_NEG, 2, ARM_EXT_THUMB, do_t_arit},
+ {"orr", 0x4300, 2, ARM_EXT_THUMB, do_t_arit},
+ {"pop", 0xbc00, 2, ARM_EXT_THUMB, do_t_push_pop},
+ {"push", 0xb400, 2, ARM_EXT_THUMB, do_t_push_pop},
+ {"ror", 0x41c0, 2, ARM_EXT_THUMB, do_t_arit},
+ {"sbc", 0x4180, 2, ARM_EXT_THUMB, do_t_arit},
+ {"stmia", 0xc000, 2, ARM_EXT_THUMB, do_t_ldmstm},
+ {"str", 0x0000, 2, ARM_EXT_THUMB, do_t_str},
+ {"strb", 0x0000, 2, ARM_EXT_THUMB, do_t_strb},
+ {"strh", 0x0000, 2, ARM_EXT_THUMB, do_t_strh},
+ {"swi", 0xdf00, 2, ARM_EXT_THUMB, do_t_swi},
+ {"sub", 0x0000, 2, ARM_EXT_THUMB, do_t_sub},
+ {"tst", T_OPCODE_TST, 2, ARM_EXT_THUMB, do_t_arit},
+ /* Pseudo ops: */
+ {"adr", 0x0000, 2, ARM_EXT_THUMB, do_t_adr},
+ {"nop", 0x46C0, 2, ARM_EXT_THUMB, do_t_nop}, /* mov r8,r8 */
};
struct reg_entry
#define REG_LR 14
#define REG_SP 13
-/* These are the standard names. Users can add aliases with .req */
+/* These are the standard names. Users can add aliases with .req. */
static CONST struct reg_entry reg_table[] =
{
/* Processor Register Numbers. */
#define BAD_PC _("r15 not allowed here")
#define BAD_FLAGS _("Instruction should not have flags")
#define BAD_COND _("Instruction is not conditional")
+#define ERR_NO_ACCUM _("acc0 expected")
-static struct hash_control * arm_ops_hsh = NULL;
-static struct hash_control * arm_tops_hsh = NULL;
-static struct hash_control * arm_cond_hsh = NULL;
+static struct hash_control * arm_ops_hsh = NULL;
+static struct hash_control * arm_tops_hsh = NULL;
+static struct hash_control * arm_cond_hsh = NULL;
static struct hash_control * arm_shift_hsh = NULL;
-static struct hash_control * arm_reg_hsh = NULL;
-static struct hash_control * arm_psr_hsh = NULL;
+static struct hash_control * arm_reg_hsh = NULL;
+static struct hash_control * arm_psr_hsh = NULL;
/* This table describes all the machine specific pseudo-ops the assembler
has to support. The fields are:
CONST pseudo_typeS md_pseudo_table[] =
{
- { "req", s_req, 0 }, /* Never called becasue '.req' does not start line */
+ /* Never called becasue '.req' does not start line. */
+ { "req", s_req, 0 },
{ "bss", s_bss, 0 },
{ "align", s_align, 0 },
{ "arm", s_arm, 0 },
/* Allow for the effect of section changes. */
{ "text", arm_s_text, 0 },
{ "data", arm_s_data, 0 },
-#ifdef OBJ_ELF
+#ifdef OBJ_ELF
{ "section", arm_s_section, 0 },
{ "section.s", arm_s_section, 0 },
{ "sect", arm_s_section, 0 },
{ "sect.s", arm_s_section, 0 },
{ "word", s_arm_elf_cons, 4 },
{ "long", s_arm_elf_cons, 4 },
+ { "file", dwarf2_directive_file, 0 },
+ { "loc", dwarf2_directive_loc, 0 },
#else
{ "word", cons, 4},
#endif
symbolS * last_label_seen;
static int label_is_thumb_function_name = false;
-/* Literal stuff */
+/* Literal stuff. */
#define MAX_LITERAL_POOL_SIZE 1024
typedef struct literalS
{
- struct expressionS exp;
- struct arm_it * inst;
+ struct expressionS exp;
+ struct arm_it * inst;
} literalT;
-literalT literals[MAX_LITERAL_POOL_SIZE];
-int next_literal_pool_place = 0; /* Next free entry in the pool */
-int lit_pool_num = 1; /* Next literal pool number */
+literalT literals[MAX_LITERAL_POOL_SIZE];
+
+/* Next free entry in the pool. */
+int next_literal_pool_place = 0;
+
+/* Next literal pool number. */
+int lit_pool_num = 1;
+
symbolS * current_poolP = NULL;
static int
while (lit_count < next_literal_pool_place)
{
if (literals[lit_count].exp.X_op == inst.reloc.exp.X_op
- && inst.reloc.exp.X_op == O_constant
- && literals[lit_count].exp.X_add_number
- == inst.reloc.exp.X_add_number
- && literals[lit_count].exp.X_unsigned == inst.reloc.exp.X_unsigned)
+ && inst.reloc.exp.X_op == O_constant
+ && (literals[lit_count].exp.X_add_number
+ == inst.reloc.exp.X_add_number)
+ && literals[lit_count].exp.X_unsigned == inst.reloc.exp.X_unsigned)
+ break;
+
+ if (literals[lit_count].exp.X_op == inst.reloc.exp.X_op
+ && inst.reloc.exp.X_op == O_symbol
+ && (literals[lit_count].exp.X_add_number
+ == inst.reloc.exp.X_add_number)
+ && (literals[lit_count].exp.X_add_symbol
+ == inst.reloc.exp.X_add_symbol)
+ && (literals[lit_count].exp.X_op_symbol
+ == inst.reloc.exp.X_op_symbol))
break;
+
lit_count++;
}
- if (lit_count == next_literal_pool_place) /* new entry */
+ if (lit_count == next_literal_pool_place) /* New entry. */
{
- if (next_literal_pool_place > MAX_LITERAL_POOL_SIZE)
- {
- inst.error = _("Literal Pool Overflow");
- return FAIL;
- }
+ if (next_literal_pool_place >= MAX_LITERAL_POOL_SIZE)
+ {
+ inst.error = _("Literal Pool Overflow");
+ return FAIL;
+ }
literals[next_literal_pool_place].exp = inst.reloc.exp;
lit_count = next_literal_pool_place++;
return SUCCESS;
}
-
+
/* Can't use symbol_new here, so have to create a symbol and then at
a later date assign it a value. Thats what these functions do. */
+
static void
symbol_locate (symbolP, name, segment, valu, frag)
- symbolS * symbolP;
- CONST char * name; /* It is copied, the caller can modify */
- segT segment; /* Segment identifier (SEG_<something>) */
- valueT valu; /* Symbol value */
- fragS * frag; /* Associated fragment */
+ symbolS * symbolP;
+ CONST char * name; /* It is copied, the caller can modify. */
+ segT segment; /* Segment identifier (SEG_<something>). */
+ valueT valu; /* Symbol value. */
+ fragS * frag; /* Associated fragment. */
{
unsigned int name_length;
char * preserved_copy_of_name;
- name_length = strlen (name) + 1; /* +1 for \0 */
+ name_length = strlen (name) + 1; /* +1 for \0. */
obstack_grow (¬es, name, name_length);
preserved_copy_of_name = obstack_finish (¬es);
#ifdef STRIP_UNDERSCORE
#ifdef tc_symbol_new_hook
tc_symbol_new_hook (symbolP);
#endif
-
+
#ifdef DEBUG_SYMS
verify_symbol_chain (symbol_rootP, symbol_lastP);
-#endif /* DEBUG_SYMS */
+#endif /* DEBUG_SYMS */
}
-/* Check that an immediate is valid, and if so,
- convert it to the right format. */
+/* Check that an immediate is valid.
+ If so, convert it to the right format. */
+
static unsigned int
validate_immediate (val)
unsigned int val;
{
unsigned int a;
unsigned int i;
-
+
#define rotate_left(v, n) (v << n | v >> (32 - n))
-
+
for (i = 0; i < 32; i += 2)
if ((a = rotate_left (val, i)) <= 0xff)
- return a | (i << 7); /* 12-bit pack: [shift-cnt,const] */
-
+ return a | (i << 7); /* 12-bit pack: [shift-cnt,const]. */
+
return FAIL;
}
/* Check to see if an immediate can be computed as two seperate immediate
values, added together. We already know that this value cannot be
computed by just one ARM instruction. */
+
static unsigned int
validate_immediate_twopart (val, highpart)
- unsigned int val;
+ unsigned int val;
unsigned int * highpart;
{
unsigned int a;
unsigned int i;
-
+
for (i = 0; i < 32; i += 2)
if (((a = rotate_left (val, i)) & 0xff) != 0)
{
{
if (a & 0xff000000)
continue;
-
* highpart = (a >> 16) | ((i + 16) << 7);
}
else
{
assert (a & 0xff000000);
-
* highpart = (a >> 24) | ((i + 8) << 7);
}
return (a & 0xff) | (i << 7);
}
-
+
return FAIL;
}
int hwse;
{
if ((hwse && val > 255) || val > 4095)
- return FAIL;
+ return FAIL;
return val;
}
-
static void
s_req (a)
int a ATTRIBUTE_UNUSED;
int ignore ATTRIBUTE_UNUSED;
{
/* We don't support putting frags in the BSS segment, we fake it by
- marking in_bss, then looking at s_skip for clues?.. */
+ marking in_bss, then looking at s_skip for clues. */
subseg_set (bss_section, 0);
demand_empty_rest_of_line ();
}
s_even (ignore)
int ignore ATTRIBUTE_UNUSED;
{
- if (!need_pass_2) /* Never make frag if expect extra pass. */
+ /* Never make frag if expect extra pass. */
+ if (!need_pass_2)
frag_align (1, 0, 0);
-
+
record_alignment (now_seg, 1);
-
+
demand_empty_rest_of_line ();
}
if (current_poolP == NULL)
return;
- /* Align pool as you have word accesses */
- /* Only make a frag if we have to ... */
+ /* Align pool as you have word accesses.
+ Only make a frag if we have to. */
if (!need_pass_2)
frag_align (2, 0, 0);
symbol_table_insert (current_poolP);
ARM_SET_THUMB (current_poolP, thumb_mode);
-
+
#if defined OBJ_COFF || defined OBJ_ELF
ARM_SET_INTERWORK (current_poolP, support_interwork);
#endif
-
+
while (lit_count < next_literal_pool_place)
/* First output the expression in the instruction to the pool. */
- emit_expr (&(literals[lit_count++].exp), 4); /* .word */
+ emit_expr (&(literals[lit_count++].exp), 4); /* .word */
next_literal_pool_place = 0;
current_poolP = NULL;
}
+/* Same as s_align_ptwo but align 0 => align 2. */
+
static void
-s_align (unused) /* Same as s_align_ptwo but align 0 => align 2 */
+s_align (unused)
int unused ATTRIBUTE_UNUSED;
{
register int temp;
if (!temp)
temp = 2;
- /* Only make a frag if we HAVE to. . . */
+ /* Only make a frag if we HAVE to. */
if (temp && !need_pass_2)
frag_align (temp, (int) temp_fill, 0);
demand_empty_rest_of_line ();
This is used by gcc/config/arm/lib1funcs.asm for example
to compile interworking support functions even if the
target processor should not support interworking. */
-
if (! thumb_mode)
{
thumb_mode = 2;
-
+
record_alignment (now_seg, 1);
}
-
+
demand_empty_rest_of_line ();
}
s_thumb_func (ignore)
int ignore ATTRIBUTE_UNUSED;
{
+ if (! thumb_mode)
+ opcode_select (16);
+
/* The following label is the name/address of the start of a Thumb function.
We need to know this for the interworking support. */
-
label_is_thumb_function_name = true;
-
+
demand_empty_rest_of_line ();
}
register char * end_name;
register symbolS * symbolP;
- /*
- * Especial apologies for the random logic:
- * this just grew, and could be parsed much more simply!
- * Dean in haste.
- */
+ /* Especial apologies for the random logic:
+ This just grew, and could be parsed much more simply!
+ Dean - in haste. */
name = input_line_pointer;
delim = get_symbol_end ();
end_name = input_line_pointer;
*end_name = delim;
-
+
SKIP_WHITESPACE ();
if (*input_line_pointer != ',')
if (name[0] == '.' && name[1] == '\0')
{
- /* XXX - this should not happen to .thumb_set */
+ /* XXX - this should not happen to .thumb_set. */
abort ();
}
if (listing & LISTING_SYMBOLS)
{
extern struct list_info_struct * listing_tail;
- fragS * dummy_frag = (fragS *) xmalloc (sizeof(fragS));
- memset (dummy_frag, 0, sizeof(fragS));
+ fragS * dummy_frag = (fragS *) xmalloc (sizeof (fragS));
+
+ memset (dummy_frag, 0, sizeof (fragS));
dummy_frag->fr_type = rs_fill;
dummy_frag->line = listing_tail;
symbolP = symbol_new (name, undefined_section, 0, dummy_frag);
}
else
#endif
- symbolP = symbol_new (name, undefined_section, 0, &zero_address_frag);
-
+ symbolP = symbol_new (name, undefined_section, 0, &zero_address_frag);
+
#ifdef OBJ_COFF
- /* "set" symbols are local unless otherwise specified. */
+ /* "set" symbols are local unless otherwise specified. */
SF_SET_LOCAL (symbolP);
-#endif /* OBJ_COFF */
- } /* make a new symbol */
+#endif /* OBJ_COFF */
+ } /* Make a new symbol. */
symbol_table_insert (symbolP);
as_bad (_("symbol `%s' already defined"), S_GET_NAME (symbolP));
pseudo_set (symbolP);
-
+
demand_empty_rest_of_line ();
/* XXX Now we come to the Thumb specific bit of code. */
-
+
THUMB_SET_FUNC (symbolP, 1);
ARM_SET_THUMB (symbolP, 1);
#if defined OBJ_ELF || defined OBJ_COFF
}
/* If we change section we must dump the literal pool first. */
+
static void
arm_s_text (ignore)
int ignore;
{
if (now_seg != text_section)
s_ltorg (0);
-
+
#ifdef OBJ_ELF
obj_elf_text (ignore);
#else
}
else if (now_seg != data_section)
s_ltorg (0);
-
+
#ifdef OBJ_ELF
obj_elf_data (ignore);
#else
case 16:
if (! thumb_mode)
{
- if (! (cpu_variant & ARM_THUMB))
+ if (! (cpu_variant & ARM_EXT_THUMB))
as_bad (_("selected processor does not support THUMB opcodes"));
+
thumb_mode = 1;
- /* No need to force the alignment, since we will have been
- coming from ARM mode, which is word-aligned. */
- record_alignment (now_seg, 1);
+ /* No need to force the alignment, since we will have been
+ coming from ARM mode, which is word-aligned. */
+ record_alignment (now_seg, 1);
}
break;
case 32:
if (thumb_mode)
{
- if ((cpu_variant & ARM_ANY) == ARM_THUMB)
+ if ((cpu_variant & ARM_ANY) == ARM_EXT_THUMB)
as_bad (_("selected processor does not support ARM opcodes"));
+
thumb_mode = 0;
- if (!need_pass_2)
+
+ if (!need_pass_2)
frag_align (2, 0, 0);
+
record_alignment (now_seg, 1);
}
break;
skip_past_comma (str)
char ** str;
{
- char *p = *str, c;
+ char * p = * str, c;
int comma = 0;
-
+
while ((c = *p) == ' ' || c == ',')
{
p++;
}
/* A standard register must be given at this point.
- Shift is the place to put it in inst.instruction.
- Restores input start point on err.
+ SHIFT is the place to put it in inst.instruction.
+ Restores input start point on error.
Returns the reg#, or FAIL. */
+
static int
reg_required_here (str, shift)
char ** str;
int shift;
{
- static char buff [128]; /* XXX */
- int reg;
- char * start = *str;
+ static char buff [128]; /* XXX */
+ int reg;
+ char * start = * str;
if ((reg = arm_reg_parse (str)) != FAIL && int_register (reg))
{
/* Restore the start point, we may have got a reg of the wrong class. */
*str = start;
-
+
/* In the few cases where we might be able to accept something else
this error can be overridden. */
sprintf (buff, _("Register expected, not '%.100s'"), start);
/* Terminate the word. */
*--p = 0;
+ /* CPSR's and SPSR's can now be lowercase. This is just a convenience
+ feature for ease of use and backwards compatibility. */
+ if (!strncmp (start, "cpsr", 4))
+ strncpy (start, "CPSR", 4);
+ else if (!strncmp (start, "spsr", 4))
+ strncpy (start, "SPSR", 4);
+
/* Now locate the word in the psr hash table. */
psr = (CONST struct asm_psr *) hash_find (arm_psr_hsh, start);
}
/* Parse the input looking for a PSR flag. */
+
static int
psr_required_here (str)
char ** str;
{
- char * start = *str;
+ char * start = * str;
CONST struct asm_psr * psr;
-
+
psr = arm_psr_parse (str);
if (psr)
/* Set the psr flags in the MSR instruction. */
inst.instruction |= psr->field << PSR_SHIFT;
-
+
return SUCCESS;
}
char ** str;
int where;
{
- int reg;
- char * start = *str;
+ int reg;
+ char * start = * str;
if ((reg = arm_reg_parse (str)) != FAIL && fp_register (reg))
{
}
(*str)++;
-
+
if (my_get_expression (& inst.reloc.exp, str))
return FAIL;
-
+
if (inst.reloc.exp.X_op == O_constant)
{
offset = inst.reloc.exp.X_add_number;
-
+
if (offset & 3)
{
inst.error = _("co-processor address must be word aligned");
if (*p == ']')
{
p++;
-
+
if (skip_past_comma (& p) == SUCCESS)
{
- /* [Rn], #expr */
+ /* [Rn], #expr */
write_back = WRITE_BACK;
-
+
if (reg == REG_PC)
{
inst.error = _("pc may not be used in post-increment");
}
else
{
- /* '['Rn, #expr']'[!] */
+ /* '['Rn, #expr']'[!] */
if (skip_past_comma (& p) == FAIL)
{
}
pre_inc = PRE_INDEX;
-
+
if (cp_address_offset (& p) == FAIL)
return FAIL;
return FAIL;
inst.reloc.type = BFD_RELOC_ARM_CP_OFF_IMM;
- inst.reloc.exp.X_add_number -= 8; /* PC rel adjust */
+ inst.reloc.exp.X_add_number -= 8; /* PC rel adjust. */
inst.reloc.pc_rel = 1;
inst.instruction |= (REG_PC << 16);
pre_inc = PRE_INDEX;
unsigned long flags;
{
int skip = 0;
-
+
/* Only one syntax. */
skip_whitespace (str);
|| strcmp (str, "cpsr") == 0
|| strcmp (str, "spsr") == 0)
skip = 4;
+
/* This is for backwards compatability with older toolchains. */
- else if (strcmp (str, "cpsr_all") == 0
+ else if ( strcmp (str, "cpsr_all") == 0
|| strcmp (str, "spsr_all") == 0)
- skip = 7;
+ skip = 8;
else
{
inst.error = _("{C|S}PSR expected");
if (* str == 's' || * str == 'S')
inst.instruction |= SPSR_BIT;
str += skip;
-
+
inst.instruction |= flags;
end_of_line (str);
}
/* Two possible forms:
"{C|S}PSR_<field>, Rm",
"{C|S}PSR_f, #expression". */
+
static void
do_msr (str, flags)
char * str;
if (psr_required_here (& str) == FAIL)
return;
-
+
if (skip_past_comma (& str) == FAIL)
{
inst.error = _("comma missing after psr flags");
if (reg_required_here (& str, 0) != FAIL)
{
- inst.error = NULL;
+ inst.error = NULL;
inst.instruction |= flags;
end_of_line (str);
return;
if (! is_immediate_prefix (* str))
{
- inst.error = _("only a register or immediate value can follow a psr flag");
+ inst.error =
+ _("only a register or immediate value can follow a psr flag");
return;
}
str ++;
inst.error = NULL;
-
+
if (my_get_expression (& inst.reloc.exp, & str))
{
- inst.error = _("only a register or immediate value can follow a psr flag");
+ inst.error =
+ _("only a register or immediate value can follow a psr flag");
return;
}
-
- if (inst.instruction & ((PSR_c | PSR_x | PSR_s) << PSR_SHIFT))
+
+#if 0 /* The first edition of the ARM architecture manual stated that
+ writing anything other than the flags with an immediate operation
+ had UNPREDICTABLE effects. This constraint was removed in the
+ second edition of the specification. */
+ if ((cpu_variant & ARM_EXT_V5) != ARM_EXT_V5
+ && inst.instruction & ((PSR_c | PSR_x | PSR_s) << PSR_SHIFT))
{
- inst.error = _("can only set flag field with immediate value");
+ inst.error = _("immediate value cannot be used to set this field");
return;
}
-
+#endif
+
flags |= INST_IMMEDIATE;
-
+
if (inst.reloc.exp.X_add_symbol)
{
inst.reloc.type = BFD_RELOC_ARM_IMMEDIATE;
else
{
unsigned value = validate_immediate (inst.reloc.exp.X_add_number);
-
+
if (value == (unsigned) FAIL)
{
inst.error = _("Invalid constant");
return;
}
-
+
inst.instruction |= value;
}
- inst.error = NULL;
+ inst.error = NULL;
inst.instruction |= flags;
end_of_line (str);
}
UMULL RdLo, RdHi, Rm, Rs
SMULL RdLo, RdHi, Rm, Rs
UMLAL RdLo, RdHi, Rm, Rs
- SMLAL RdLo, RdHi, Rm, Rs
-*/
+ SMLAL RdLo, RdHi, Rm, Rs. */
+
static void
do_mull (str, flags)
char * str;
{
int rdlo, rdhi, rm, rs;
- /* Only one format "rdlo, rdhi, rm, rs" */
+ /* Only one format "rdlo, rdhi, rm, rs". */
skip_whitespace (str);
if ((rdlo = reg_required_here (&str, 12)) == FAIL)
return;
}
- /* rdhi, rdlo and rm must all be different */
+ /* rdhi, rdlo and rm must all be different. */
if (rdlo == rdhi || rdlo == rm || rdhi == rm)
as_tsktsk (_("rdhi, rdlo and rm must all be different"));
inst.error = BAD_PC;
return;
}
-
+
inst.instruction |= flags;
end_of_line (str);
return;
static void
do_mul (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
int rd, rm;
-
- /* Only one format "rd, rm, rs" */
+
+ /* Only one format "rd, rm, rs". */
skip_whitespace (str);
if ((rd = reg_required_here (&str, 16)) == FAIL)
static void
do_mla (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
int rd, rm;
- /* Only one format "rd, rm, rs, rn" */
+ /* Only one format "rd, rm, rs, rn". */
skip_whitespace (str);
if ((rd = reg_required_here (&str, 16)) == FAIL)
return;
}
-/* Returns the index into fp_values of a floating point number, or -1 if
- not in the table. */
+/* Expects *str -> the characters "acc0", possibly with leading blanks.
+ Advances *str to the next non-alphanumeric.
+ Returns 0, or else FAIL (in which case sets inst.error).
+
+ (In a future XScale, there may be accumulators other than zero.
+ At that time this routine and its callers can be upgraded to suit.) */
+
static int
-my_get_float_expression (str)
+accum0_required_here (str)
char ** str;
{
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- char * save_in;
- expressionS exp;
- int i;
- int j;
+ static char buff [128]; /* Note the address is taken. Hence, static. */
+ char * p = * str;
+ char c;
+ int result = 0; /* The accum number. */
- memset (words, 0, MAX_LITTLENUMS * sizeof (LITTLENUM_TYPE));
- /* Look for a raw floating point number */
- if ((save_in = atof_ieee (*str, 'x', words)) != NULL
- && (is_end_of_line [(int)(*save_in)] || *save_in == '\0'))
- {
- for (i = 0; i < NUM_FLOAT_VALS; i++)
- {
- for (j = 0; j < MAX_LITTLENUMS; j++)
- {
- if (words[j] != fp_values[i][j])
- break;
- }
+ skip_whitespace (p);
- if (j == MAX_LITTLENUMS)
- {
- *str = save_in;
- return i;
- }
- }
- }
+ *str = p; /* Advance caller's string pointer too. */
+ c = *p++;
+ while (isalnum (c))
+ c = *p++;
- /* Try and parse a more complex expression, this will probably fail
- unless the code uses a floating point prefix (eg "0f") */
- save_in = input_line_pointer;
- input_line_pointer = *str;
- if (expression (&exp) == absolute_section
- && exp.X_op == O_big
- && exp.X_add_number < 0)
- {
- /* FIXME: 5 = X_PRECISION, should be #define'd where we can use it.
- Ditto for 15. */
- if (gen_to_words (words, 5, (long)15) == 0)
- {
- for (i = 0; i < NUM_FLOAT_VALS; i++)
- {
- for (j = 0; j < MAX_LITTLENUMS; j++)
- {
- if (words[j] != fp_values[i][j])
- break;
- }
+ *--p = 0; /* Aap nul into input buffer at non-alnum. */
- if (j == MAX_LITTLENUMS)
- {
- *str = input_line_pointer;
- input_line_pointer = save_in;
- return i;
- }
- }
- }
+ if (! ( streq (*str, "acc0") || streq (*str, "ACC0")))
+ {
+ sprintf (buff, _("acc0 expected, not '%.100s'"), *str);
+ inst.error = buff;
+ result = FAIL;
}
- *str = input_line_pointer;
- input_line_pointer = save_in;
- return -1;
+ *p = c; /* Unzap. */
+ *str = p; /* Caller's string pointer to after match. */
+ return result;
}
-/* Return true if anything in the expression is a bignum */
+/* Expects **str -> after a comma. May be leading blanks.
+ Advances *str, recognizing a load mode, and setting inst.instruction.
+ Returns rn, or else FAIL (in which case may set inst.error
+ and not advance str)
+
+ Note: doesn't know Rd, so no err checks that require such knowledge. */
+
static int
-walk_no_bignums (sp)
- symbolS * sp;
+ld_mode_required_here (string)
+ char ** string;
{
- if (symbol_get_value_expression (sp)->X_op == O_big)
- return 1;
+ char * str = * string;
+ int rn;
+ int pre_inc = 0;
- if (symbol_get_value_expression (sp)->X_add_symbol)
+ skip_whitespace (str);
+
+ if (* str == '[')
{
- return (walk_no_bignums (symbol_get_value_expression (sp)->X_add_symbol)
- || (symbol_get_value_expression (sp)->X_op_symbol
- && walk_no_bignums (symbol_get_value_expression (sp)->X_op_symbol)));
- }
+ str++;
- return 0;
-}
+ skip_whitespace (str);
-static int
-my_get_expression (ep, str)
- expressionS * ep;
- char ** str;
-{
- char * save_in;
- segT seg;
-
- save_in = input_line_pointer;
- input_line_pointer = *str;
- seg = expression (ep);
+ if ((rn = reg_required_here (& str, 16)) == FAIL)
+ return FAIL;
-#ifdef OBJ_AOUT
- if (seg != absolute_section
- && seg != text_section
- && seg != data_section
- && seg != bss_section
- && seg != undefined_section)
- {
- inst.error = _("bad_segment");
- *str = input_line_pointer;
- input_line_pointer = save_in;
- return 1;
- }
-#endif
+ skip_whitespace (str);
- /* Get rid of any bignums now, so that we don't generate an error for which
- we can't establish a line number later on. Big numbers are never valid
+ if (* str == ']')
+ {
+ str ++;
+
+ if (skip_past_comma (& str) == SUCCESS)
+ {
+ /* [Rn],... (post inc) */
+ if (ldst_extend (& str, 1) == FAIL)
+ return FAIL;
+ }
+ else /* [Rn] */
+ {
+ skip_whitespace (str);
+
+ if (* str == '!')
+ {
+ str ++;
+ inst.instruction |= WRITE_BACK;
+ }
+
+ inst.instruction |= INDEX_UP | HWOFFSET_IMM;
+ pre_inc = 1;
+ }
+ }
+ else /* [Rn,...] */
+ {
+ if (skip_past_comma (& str) == FAIL)
+ {
+ inst.error = _("pre-indexed expression expected");
+ return FAIL;
+ }
+
+ pre_inc = 1;
+
+ if (ldst_extend (& str, 1) == FAIL)
+ return FAIL;
+
+ skip_whitespace (str);
+
+ if (* str ++ != ']')
+ {
+ inst.error = _("missing ]");
+ return FAIL;
+ }
+
+ skip_whitespace (str);
+
+ if (* str == '!')
+ {
+ str ++;
+ inst.instruction |= WRITE_BACK;
+ }
+ }
+ }
+ else if (* str == '=') /* ldr's "r,=label" syntax */
+ /* We should never reach here, because <text> = <expression> is
+ caught gas/read.c read_a_source_file() as a .set operation. */
+ return FAIL;
+ else /* PC +- 8 bit immediate offset. */
+ {
+ if (my_get_expression (& inst.reloc.exp, & str))
+ return FAIL;
+
+ inst.instruction |= HWOFFSET_IMM; /* The I bit. */
+ inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8;
+ inst.reloc.exp.X_add_number -= 8; /* PC rel adjust. */
+ inst.reloc.pc_rel = 1;
+ inst.instruction |= (REG_PC << 16);
+
+ rn = REG_PC;
+ pre_inc = 1;
+ }
+
+ inst.instruction |= (pre_inc ? PRE_INDEX : 0);
+ * string = str;
+
+ return rn;
+}
+
+/* ARM V5E (El Segundo) signed-multiply-accumulate (argument parse)
+ SMLAxy{cond} Rd,Rm,Rs,Rn
+ SMLAWy{cond} Rd,Rm,Rs,Rn
+ Error if any register is R15. */
+
+static void
+do_smla (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd, rm, rs, rn;
+
+ skip_whitespace (str);
+
+ if ((rd = reg_required_here (& str, 16)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rm = reg_required_here (& str, 0)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rs = reg_required_here (& str, 8)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rn = reg_required_here (& str, 12)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (rd == REG_PC || rm == REG_PC || rs == REG_PC || rn == REG_PC)
+ inst.error = BAD_PC;
+
+ else if (flags)
+ inst.error = BAD_FLAGS;
+
+ else
+ end_of_line (str);
+}
+
+/* ARM V5E (El Segundo) signed-multiply-accumulate-long (argument parse)
+ SMLALxy{cond} Rdlo,Rdhi,Rm,Rs
+ Error if any register is R15.
+ Warning if Rdlo == Rdhi. */
+
+static void
+do_smlal (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rdlo, rdhi, rm, rs;
+
+ skip_whitespace (str);
+
+ if ((rdlo = reg_required_here (& str, 12)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rdhi = reg_required_here (& str, 16)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rm = reg_required_here (& str, 0)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rs = reg_required_here (& str, 8)) == FAIL)
+ {
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (rdlo == REG_PC || rdhi == REG_PC || rm == REG_PC || rs == REG_PC)
+ {
+ inst.error = BAD_PC;
+ return;
+ }
+
+ if (rdlo == rdhi)
+ as_tsktsk (_("rdhi and rdlo must be different"));
+
+ if (flags)
+ inst.error = BAD_FLAGS;
+ else
+ end_of_line (str);
+}
+
+/* ARM V5E (El Segundo) signed-multiply (argument parse)
+ SMULxy{cond} Rd,Rm,Rs
+ Error if any register is R15. */
+
+static void
+do_smul (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd, rm, rs;
+
+ skip_whitespace (str);
+
+ if ((rd = reg_required_here (& str, 16)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rm = reg_required_here (& str, 0)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rs = reg_required_here (& str, 8)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (rd == REG_PC || rm == REG_PC || rs == REG_PC)
+ inst.error = BAD_PC;
+
+ else if (flags)
+ inst.error = BAD_FLAGS;
+
+ else
+ end_of_line (str);
+}
+
+/* ARM V5E (El Segundo) saturating-add/subtract (argument parse)
+ Q[D]{ADD,SUB}{cond} Rd,Rm,Rn
+ Error if any register is R15. */
+
+static void
+do_qadd (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd, rm, rn;
+
+ skip_whitespace (str);
+
+ if ((rd = reg_required_here (& str, 12)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rm = reg_required_here (& str, 0)) == FAIL
+ || skip_past_comma (& str) == FAIL
+ || (rn = reg_required_here (& str, 16)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (rd == REG_PC || rm == REG_PC || rn == REG_PC)
+ inst.error = BAD_PC;
+
+ else if (flags)
+ inst.error = BAD_FLAGS;
+
+ else
+ end_of_line (str);
+}
+
+/* ARM V5E (el Segundo)
+ MCRRcc <coproc>, <opcode>, <Rd>, <Rn>, <CRm>.
+ MRRCcc <coproc>, <opcode>, <Rd>, <Rn>, <CRm>.
+
+ These are equivalent to the XScale instructions MAR and MRA,
+ respectively, when coproc == 0, opcode == 0, and CRm == 0.
+
+ Result unpredicatable if Rd or Rn is R15. */
+
+static void
+do_co_reg2c (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd, rn;
+
+ skip_whitespace (str);
+
+ if (co_proc_number (& str) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_opc_expr (& str, 4, 4) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || (rd = reg_required_here (& str, 12)) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || (rn = reg_required_here (& str, 16)) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ /* Unpredictable result if rd or rn is R15. */
+ if (rd == REG_PC || rn == REG_PC)
+ as_tsktsk
+ (_("Warning: Instruction unpredictable when using r15"));
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 0) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (flags)
+ inst.error = BAD_COND;
+
+ end_of_line (str);
+}
+
+/* ARM V5 count-leading-zeroes instruction (argument parse)
+ CLZ{<cond>} <Rd>, <Rm>
+ Condition defaults to COND_ALWAYS.
+ Error if Rd or Rm are R15. */
+
+static void
+do_clz (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd, rm;
+
+ if (flags)
+ {
+ as_bad (BAD_FLAGS);
+ return;
+ }
+
+ skip_whitespace (str);
+
+ if (((rd = reg_required_here (& str, 12)) == FAIL)
+ || (skip_past_comma (& str) == FAIL)
+ || ((rm = reg_required_here (& str, 0)) == FAIL))
+ inst.error = BAD_ARGS;
+
+ else if (rd == REG_PC || rm == REG_PC )
+ inst.error = BAD_PC;
+
+ else
+ end_of_line (str);
+}
+
+/* ARM V5 (argument parse)
+ LDC2{L} <coproc>, <CRd>, <addressing mode>
+ STC2{L} <coproc>, <CRd>, <addressing mode>
+ Instruction is not conditional, and has 0xf in the codition field.
+ Otherwise, it's the same as LDC/STC. */
+
+static void
+do_lstc2 (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ if (flags)
+ inst.error = BAD_COND;
+
+ skip_whitespace (str);
+
+ if (co_proc_number (& str) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ }
+ else if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 12) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ }
+ else if (skip_past_comma (& str) == FAIL
+ || cp_address_required_here (& str) == FAIL)
+ {
+ if (! inst.error)
+ inst.error = BAD_ARGS;
+ }
+ else
+ end_of_line (str);
+}
+
+/* ARM V5 (argument parse)
+ CDP2 <coproc>, <opcode_1>, <CRd>, <CRn>, <CRm>, <opcode_2>
+ Instruction is not conditional, and has 0xf in the condition field.
+ Otherwise, it's the same as CDP. */
+
+static void
+do_cdp2 (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ skip_whitespace (str);
+
+ if (co_proc_number (& str) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_opc_expr (& str, 20,4) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 12) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 16) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 0) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == SUCCESS)
+ {
+ if (cp_opc_expr (& str, 5, 3) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+ }
+
+ if (flags)
+ inst.error = BAD_FLAGS;
+
+ end_of_line (str);
+}
+
+/* ARM V5 (argument parse)
+ MCR2 <coproc>, <opcode_1>, <Rd>, <CRn>, <CRm>, <opcode_2>
+ MRC2 <coproc>, <opcode_1>, <Rd>, <CRn>, <CRm>, <opcode_2>
+ Instruction is not conditional, and has 0xf in the condition field.
+ Otherwise, it's the same as MCR/MRC. */
+
+static void
+do_co_reg2 (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ skip_whitespace (str);
+
+ if (co_proc_number (& str) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_opc_expr (& str, 21, 3) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || reg_required_here (& str, 12) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 16) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || cp_reg_required_here (& str, 0) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == SUCCESS)
+ {
+ if (cp_opc_expr (& str, 5, 3) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+ }
+
+ if (flags)
+ inst.error = BAD_COND;
+
+ end_of_line (str);
+}
+
+/* THUMB V5 breakpoint instruction (argument parse)
+ BKPT <immed_8>. */
+
+static void
+do_t_bkpt (str)
+ char * str;
+{
+ expressionS expr;
+ unsigned long number;
+
+ skip_whitespace (str);
+
+ /* Allow optional leading '#'. */
+ if (is_immediate_prefix (*str))
+ str ++;
+
+ memset (& expr, '\0', sizeof (expr));
+ if (my_get_expression (& expr, & str) || (expr.X_op != O_constant))
+ {
+ inst.error = _("bad or missing expression");
+ return;
+ }
+
+ number = expr.X_add_number;
+
+ /* Check it fits an 8 bit unsigned. */
+ if (number != (number & 0xff))
+ {
+ inst.error = _("immediate value out of range");
+ return;
+ }
+
+ inst.instruction |= number;
+
+ end_of_line (str);
+}
+
+/* ARM V5 branch-link-exchange (argument parse) for BLX(1) only.
+ Expects inst.instruction is set for BLX(1).
+ Note: this is cloned from do_branch, and the reloc changed to be a
+ new one that can cope with setting one extra bit (the H bit). */
+
+static void
+do_branch25 (str, flags)
+ char * str;
+ unsigned long flags ATTRIBUTE_UNUSED;
+{
+ if (my_get_expression (& inst.reloc.exp, & str))
+ return;
+
+#ifdef OBJ_ELF
+ {
+ char * save_in;
+
+ /* ScottB: February 5, 1998 */
+ /* Check to see of PLT32 reloc required for the instruction. */
+
+ /* arm_parse_reloc() works on input_line_pointer.
+ We actually want to parse the operands to the branch instruction
+ passed in 'str'. Save the input pointer and restore it later. */
+ save_in = input_line_pointer;
+ input_line_pointer = str;
+
+ if (inst.reloc.exp.X_op == O_symbol
+ && *str == '('
+ && arm_parse_reloc () == BFD_RELOC_ARM_PLT32)
+ {
+ inst.reloc.type = BFD_RELOC_ARM_PLT32;
+ inst.reloc.pc_rel = 0;
+ /* Modify str to point to after parsed operands, otherwise
+ end_of_line() will complain about the (PLT) left in str. */
+ str = input_line_pointer;
+ }
+ else
+ {
+ inst.reloc.type = BFD_RELOC_ARM_PCREL_BLX;
+ inst.reloc.pc_rel = 1;
+ }
+
+ input_line_pointer = save_in;
+ }
+#else
+ inst.reloc.type = BFD_RELOC_ARM_PCREL_BLX;
+ inst.reloc.pc_rel = 1;
+#endif /* OBJ_ELF */
+
+ end_of_line (str);
+}
+
+/* ARM V5 branch-link-exchange instruction (argument parse)
+ BLX <target_addr> ie BLX(1)
+ BLX{<condition>} <Rm> ie BLX(2)
+ Unfortunately, there are two different opcodes for this mnemonic.
+ So, the insns[].value is not used, and the code here zaps values
+ into inst.instruction.
+ Also, the <target_addr> can be 25 bits, hence has its own reloc. */
+
+static void
+do_blx (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ char * mystr = str;
+ int rm;
+
+ if (flags)
+ {
+ as_bad (BAD_FLAGS);
+ return;
+ }
+
+ skip_whitespace (mystr);
+ rm = reg_required_here (& mystr, 0);
+
+ /* The above may set inst.error. Ignore his opinion. */
+ inst.error = 0;
+
+ if (rm != FAIL)
+ {
+ /* Arg is a register.
+ Use the condition code our caller put in inst.instruction.
+ Pass ourselves off as a BX with a funny opcode. */
+ inst.instruction |= 0x012fff30;
+ do_bx (str, flags);
+ }
+ else
+ {
+ /* This must be is BLX <target address>, no condition allowed. */
+ if (inst.instruction != COND_ALWAYS)
+ {
+ inst.error = BAD_COND;
+ return;
+ }
+
+ inst.instruction = 0xfafffffe;
+
+ /* Process like a B/BL, but with a different reloc.
+ Note that B/BL expecte fffffe, not 0, offset in the opcode table. */
+ do_branch25 (str, flags);
+ }
+}
+
+/* ARM V5 Thumb BLX (argument parse)
+ BLX <target_addr> which is BLX(1)
+ BLX <Rm> which is BLX(2)
+ Unfortunately, there are two different opcodes for this mnemonic.
+ So, the tinsns[].value is not used, and the code here zaps values
+ into inst.instruction. */
+
+static void
+do_t_blx (str)
+ char * str;
+{
+ char * mystr = str;
+ int rm;
+
+ skip_whitespace (mystr);
+ inst.instruction = 0x4780;
+
+ /* Note that this call is to the ARM register recognizer. BLX(2)
+ uses the ARM register space, not the Thumb one, so a call to
+ thumb_reg() would be wrong. */
+ rm = reg_required_here (& mystr, 3);
+ inst.error = 0;
+
+ if (rm != FAIL)
+ {
+ /* It's BLX(2). The .instruction was zapped with rm & is final. */
+ inst.size = 2;
+ }
+ else
+ {
+ /* No ARM register. This must be BLX(1). Change the .instruction. */
+ inst.instruction = 0xf7ffeffe;
+ inst.size = 4;
+
+ if (my_get_expression (& inst.reloc.exp, & mystr))
+ return;
+
+ inst.reloc.type = BFD_RELOC_THUMB_PCREL_BLX;
+ inst.reloc.pc_rel = 1;
+ }
+
+ end_of_line (mystr);
+}
+
+/* ARM V5 breakpoint instruction (argument parse)
+ BKPT <16 bit unsigned immediate>
+ Instruction is not conditional.
+ The bit pattern given in insns[] has the COND_ALWAYS condition,
+ and it is an error if the caller tried to override that.
+ Note "flags" is nonzero if a flag was supplied (which is an error). */
+
+static void
+do_bkpt (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ expressionS expr;
+ unsigned long number;
+
+ skip_whitespace (str);
+
+ /* Allow optional leading '#'. */
+ if (is_immediate_prefix (* str))
+ str++;
+
+ memset (& expr, '\0', sizeof (expr));
+
+ if (my_get_expression (& expr, & str) || (expr.X_op != O_constant))
+ {
+ inst.error = _("bad or missing expression");
+ return;
+ }
+
+ number = expr.X_add_number;
+
+ /* Check it fits a 16 bit unsigned. */
+ if (number != (number & 0xffff))
+ {
+ inst.error = _("immediate value out of range");
+ return;
+ }
+
+ /* Top 12 of 16 bits to bits 19:8. */
+ inst.instruction |= (number & 0xfff0) << 4;
+
+ /* Bottom 4 of 16 bits to bits 3:0. */
+ inst.instruction |= number & 0xf;
+
+ end_of_line (str);
+
+ if (flags)
+ inst.error = BAD_FLAGS;
+}
+
+/* Xscale multiply-accumulate (argument parse)
+ MIAcc acc0,Rm,Rs
+ MIAPHcc acc0,Rm,Rs
+ MIAxycc acc0,Rm,Rs. */
+
+static void
+do_mia (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rs;
+ int rm;
+
+ if (flags)
+ as_bad (BAD_FLAGS);
+
+ else if (accum0_required_here (& str) == FAIL)
+ inst.error = ERR_NO_ACCUM;
+
+ else if (skip_past_comma (& str) == FAIL
+ || (rm = reg_required_here (& str, 0)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (skip_past_comma (& str) == FAIL
+ || (rs = reg_required_here (& str, 12)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ /* inst.instruction has now been zapped with both rm and rs. */
+ else if (rm == REG_PC || rs == REG_PC)
+ inst.error = BAD_PC; /* Undefined result if rm or rs is R15. */
+
+ else
+ end_of_line (str);
+}
+
+/* Xscale move-accumulator-register (argument parse)
+
+ MARcc acc0,RdLo,RdHi. */
+
+static void
+do_mar (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rdlo, rdhi;
+
+ if (flags)
+ as_bad (BAD_FLAGS);
+
+ else if (accum0_required_here (& str) == FAIL)
+ inst.error = ERR_NO_ACCUM;
+
+ else if (skip_past_comma (& str) == FAIL
+ || (rdlo = reg_required_here (& str, 12)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (skip_past_comma (& str) == FAIL
+ || (rdhi = reg_required_here (& str, 16)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ /* inst.instruction has now been zapped with both rdlo and rdhi. */
+ else if (rdlo == REG_PC || rdhi == REG_PC)
+ inst.error = BAD_PC; /* Undefined result if rdlo or rdhi is R15. */
+
+ else
+ end_of_line (str);
+}
+
+/* Xscale move-register-accumulator (argument parse)
+
+ MRAcc RdLo,RdHi,acc0. */
+
+static void
+do_mra (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rdlo;
+ int rdhi;
+
+ if (flags)
+ {
+ as_bad (BAD_FLAGS);
+ return;
+ }
+
+ skip_whitespace (str);
+
+ if ((rdlo = reg_required_here (& str, 12)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (skip_past_comma (& str) == FAIL
+ || (rdhi = reg_required_here (& str, 16)) == FAIL)
+ inst.error = BAD_ARGS;
+
+ else if (skip_past_comma (& str) == FAIL
+ || accum0_required_here (& str) == FAIL)
+ inst.error = ERR_NO_ACCUM;
+
+ /* inst.instruction has now been zapped with both rdlo and rdhi. */
+ else if (rdlo == rdhi)
+ inst.error = BAD_ARGS; /* Undefined result if 2 writes to same reg. */
+
+ else if (rdlo == REG_PC || rdhi == REG_PC)
+ inst.error = BAD_PC; /* Undefined result if rdlo or rdhi is R15. */
+ else
+ end_of_line (str);
+}
+
+/* Xscale: Preload-Cache
+
+ PLD <addr_mode>
+
+ Syntactically, like LDR with B=1, W=0, L=1. */
+
+static void
+do_pld (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd;
+
+ if (flags)
+ {
+ as_bad (BAD_FLAGS);
+ return;
+ }
+
+ skip_whitespace (str);
+
+ if (* str != '[')
+ {
+ inst.error = _("'[' expected after PLD mnemonic");
+ return;
+ }
+
+ ++ str;
+ skip_whitespace (str);
+
+ if ((rd = reg_required_here (& str, 16)) == FAIL)
+ return;
+
+ skip_whitespace (str);
+
+ if (* str == ']')
+ {
+ /* [Rn], ... ? */
+ ++ str;
+ skip_whitespace (str);
+
+ if (skip_past_comma (& str) == SUCCESS)
+ {
+ if (ldst_extend (& str, 0) == FAIL)
+ return;
+ }
+ else if (* str == '!') /* [Rn]! */
+ {
+ inst.error = _("writeback used in preload instruction");
+ ++ str;
+ }
+ else /* [Rn] */
+ inst.instruction |= INDEX_UP | PRE_INDEX;
+ }
+ else /* [Rn, ...] */
+ {
+ if (skip_past_comma (& str) == FAIL)
+ {
+ inst.error = _("pre-indexed expression expected");
+ return;
+ }
+
+ if (ldst_extend (& str, 0) == FAIL)
+ return;
+
+ skip_whitespace (str);
+
+ if (* str != ']')
+ {
+ inst.error = _("missing ]");
+ return;
+ }
+
+ ++ str;
+ skip_whitespace (str);
+
+ if (* str == '!') /* [Rn]! */
+ {
+ inst.error = _("writeback used in preload instruction");
+ ++ str;
+ }
+
+ inst.instruction |= PRE_INDEX;
+ }
+
+ end_of_line (str);
+}
+
+/* Xscale load-consecutive (argument parse)
+ Mode is like LDRH.
+
+ LDRccD R, mode
+ STRccD R, mode. */
+
+static void
+do_ldrd (str, flags)
+ char * str;
+ unsigned long flags;
+{
+ int rd;
+ int rn;
+
+ if (flags != DOUBLE_LOAD_FLAG)
+ {
+ /* Change instruction pattern to normal ldr/str. */
+ if (inst.instruction & 0x20)
+ inst.instruction = (inst.instruction & COND_MASK) | 0x04000000; /* str */
+ else
+ inst.instruction = (inst.instruction & COND_MASK) | 0x04100000; /* ldr */
+
+ /* Perform a normal load/store instruction parse. */
+ do_ldst (str, flags);
+
+ return;
+ }
+
+ if ((cpu_variant & ARM_EXT_XSCALE) != ARM_EXT_XSCALE)
+ {
+ static char buff[128];
+
+ --str;
+ while (isspace (*str))
+ --str;
+ str -= 4;
+
+ /* Deny all knowledge. */
+ sprintf (buff, _("bad instruction '%.100s'"), str);
+ inst.error = buff;
+ return;
+ }
+
+ skip_whitespace (str);
+
+ if ((rd = reg_required_here (& str, 12)) == FAIL)
+ {
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ if (skip_past_comma (& str) == FAIL
+ || (rn = ld_mode_required_here (& str)) == FAIL)
+ {
+ if (!inst.error)
+ inst.error = BAD_ARGS;
+ return;
+ }
+
+ /* inst.instruction has now been zapped with Rd and the addressing mode. */
+ if (rd & 1) /* Unpredictable result if Rd is odd. */
+ {
+ inst.error = _("Destination register must be even");
+ return;
+ }
+
+ if (rd == REG_LR || rd == 12)
+ {
+ inst.error = _("r12 or r14 not allowed here");
+ return;
+ }
+
+ if (((rd == rn) || (rd + 1 == rn))
+ &&
+ ((inst.instruction & WRITE_BACK)
+ || (!(inst.instruction & PRE_INDEX))))
+ as_warn (_("pre/post-indexing used when modified address register is destination"));
+
+ end_of_line (str);
+}
+
+/* Returns the index into fp_values of a floating point number,
+ or -1 if not in the table. */
+
+static int
+my_get_float_expression (str)
+ char ** str;
+{
+ LITTLENUM_TYPE words[MAX_LITTLENUMS];
+ char * save_in;
+ expressionS exp;
+ int i;
+ int j;
+
+ memset (words, 0, MAX_LITTLENUMS * sizeof (LITTLENUM_TYPE));
+
+ /* Look for a raw floating point number. */
+ if ((save_in = atof_ieee (*str, 'x', words)) != NULL
+ && is_end_of_line[(unsigned char) *save_in])
+ {
+ for (i = 0; i < NUM_FLOAT_VALS; i++)
+ {
+ for (j = 0; j < MAX_LITTLENUMS; j++)
+ {
+ if (words[j] != fp_values[i][j])
+ break;
+ }
+
+ if (j == MAX_LITTLENUMS)
+ {
+ *str = save_in;
+ return i;
+ }
+ }
+ }
+
+ /* Try and parse a more complex expression, this will probably fail
+ unless the code uses a floating point prefix (eg "0f"). */
+ save_in = input_line_pointer;
+ input_line_pointer = *str;
+ if (expression (&exp) == absolute_section
+ && exp.X_op == O_big
+ && exp.X_add_number < 0)
+ {
+ /* FIXME: 5 = X_PRECISION, should be #define'd where we can use it.
+ Ditto for 15. */
+ if (gen_to_words (words, 5, (long) 15) == 0)
+ {
+ for (i = 0; i < NUM_FLOAT_VALS; i++)
+ {
+ for (j = 0; j < MAX_LITTLENUMS; j++)
+ {
+ if (words[j] != fp_values[i][j])
+ break;
+ }
+
+ if (j == MAX_LITTLENUMS)
+ {
+ *str = input_line_pointer;
+ input_line_pointer = save_in;
+ return i;
+ }
+ }
+ }
+ }
+
+ *str = input_line_pointer;
+ input_line_pointer = save_in;
+ return -1;
+}
+
+/* Return true if anything in the expression is a bignum. */
+
+static int
+walk_no_bignums (sp)
+ symbolS * sp;
+{
+ if (symbol_get_value_expression (sp)->X_op == O_big)
+ return 1;
+
+ if (symbol_get_value_expression (sp)->X_add_symbol)
+ {
+ return (walk_no_bignums (symbol_get_value_expression (sp)->X_add_symbol)
+ || (symbol_get_value_expression (sp)->X_op_symbol
+ && walk_no_bignums (symbol_get_value_expression (sp)->X_op_symbol)));
+ }
+
+ return 0;
+}
+
+static int
+my_get_expression (ep, str)
+ expressionS * ep;
+ char ** str;
+{
+ char * save_in;
+ segT seg;
+
+ save_in = input_line_pointer;
+ input_line_pointer = *str;
+ seg = expression (ep);
+
+#ifdef OBJ_AOUT
+ if (seg != absolute_section
+ && seg != text_section
+ && seg != data_section
+ && seg != bss_section
+ && seg != undefined_section)
+ {
+ inst.error = _("bad_segment");
+ *str = input_line_pointer;
+ input_line_pointer = save_in;
+ return 1;
+ }
+#endif
+
+ /* Get rid of any bignums now, so that we don't generate an error for which
+ we can't establish a line number later on. Big numbers are never valid
in instructions, which is where this routine is always called. */
if (ep->X_op == O_big
|| (ep->X_add_symbol
return 0;
}
-/* unrestrict should be one if <shift> <register> is permitted for this
- instruction */
+/* UNRESTRICT should be one if <shift> <register> is permitted for this
+ instruction. */
static int
decode_shift (str, unrestrict)
char ** str;
int unrestrict;
{
- struct asm_shift * shft;
+ const struct asm_shift_name * shift;
char * p;
char c;
-
+
skip_whitespace (* str);
-
- for (p = *str; isalpha (*p); p++)
+
+ for (p = * str; isalpha (* p); p ++)
;
- if (p == *str)
+ if (p == * str)
{
inst.error = _("Shift expression expected");
return FAIL;
}
- c = *p;
- *p = '\0';
- shft = (struct asm_shift *) hash_find (arm_shift_hsh, *str);
- *p = c;
- if (shft)
+ c = * p;
+ * p = '\0';
+ shift = (const struct asm_shift_name *) hash_find (arm_shift_hsh, * str);
+ * p = c;
+
+ if (shift == NULL)
{
- if (!strncmp (*str, "rrx", 3)
- || !strncmp (*str, "RRX", 3))
- {
- *str = p;
- inst.instruction |= shft->value;
- return SUCCESS;
- }
+ inst.error = _("Shift expression expected");
+ return FAIL;
+ }
- skip_whitespace (p);
-
- if (unrestrict && reg_required_here (&p, 8) != FAIL)
- {
- inst.instruction |= shft->value | SHIFT_BY_REG;
- *str = p;
- return SUCCESS;
- }
- else if (is_immediate_prefix (* p))
- {
- inst.error = NULL;
- p++;
- if (my_get_expression (&inst.reloc.exp, &p))
- return FAIL;
+ assert (shift->properties->index == shift_properties[shift->properties->index].index);
- /* Validate some simple #expressions */
- if (inst.reloc.exp.X_op == O_constant)
- {
- unsigned num = inst.reloc.exp.X_add_number;
+ if (shift->properties->index == SHIFT_RRX)
+ {
+ * str = p;
+ inst.instruction |= shift->properties->bit_field;
+ return SUCCESS;
+ }
- /* Reject operations greater than 32, or lsl #32 */
- if (num > 32 || (num == 32 && shft->value == 0))
- {
- inst.error = _("Invalid immediate shift");
- return FAIL;
- }
+ skip_whitespace (p);
- /* Shifts of zero should be converted to lsl (which is zero)*/
- if (num == 0)
- {
- *str = p;
- return SUCCESS;
- }
+ if (unrestrict && reg_required_here (& p, 8) != FAIL)
+ {
+ inst.instruction |= shift->properties->bit_field | SHIFT_BY_REG;
+ * str = p;
+ return SUCCESS;
+ }
+ else if (! is_immediate_prefix (* p))
+ {
+ inst.error = (unrestrict
+ ? _("shift requires register or #expression")
+ : _("shift requires #expression"));
+ * str = p;
+ return FAIL;
+ }
- /* Shifts of 32 are encoded as 0, for those shifts that
- support it. */
- if (num == 32)
- num = 0;
+ inst.error = NULL;
+ p ++;
- inst.instruction |= (num << 7) | shft->value;
- *str = p;
- return SUCCESS;
- }
+ if (my_get_expression (& inst.reloc.exp, & p))
+ return FAIL;
- inst.reloc.type = BFD_RELOC_ARM_SHIFT_IMM;
- inst.reloc.pc_rel = 0;
- inst.instruction |= shft->value;
- *str = p;
- return SUCCESS;
- }
- else
+ /* Validate some simple #expressions. */
+ if (inst.reloc.exp.X_op == O_constant)
+ {
+ unsigned num = inst.reloc.exp.X_add_number;
+
+ /* Reject operations greater than 32. */
+ if (num > 32
+ /* Reject a shift of 0 unless the mode allows it. */
+ || (num == 0 && shift->properties->allows_0 == 0)
+ /* Reject a shift of 32 unless the mode allows it. */
+ || (num == 32 && shift->properties->allows_32 == 0)
+ )
{
- inst.error = unrestrict ? _("shift requires register or #expression")
- : _("shift requires #expression");
- *str = p;
- return FAIL;
+ /* As a special case we allow a shift of zero for
+ modes that do not support it to be recoded as an
+ logical shift left of zero (ie nothing). We warn
+ about this though. */
+ if (num == 0)
+ {
+ as_warn (_("Shift of 0 ignored."));
+ shift = & shift_names[0];
+ assert (shift->properties->index == SHIFT_LSL);
+ }
+ else
+ {
+ inst.error = _("Invalid immediate shift");
+ return FAIL;
+ }
}
+
+ /* Shifts of 32 are encoded as 0, for those shifts that
+ support it. */
+ if (num == 32)
+ num = 0;
+
+ inst.instruction |= (num << 7) | shift->properties->bit_field;
+ }
+ else
+ {
+ inst.reloc.type = BFD_RELOC_ARM_SHIFT_IMM;
+ inst.reloc.pc_rel = 0;
+ inst.instruction |= shift->properties->bit_field;
}
- inst.error = _("Shift expression expected");
- return FAIL;
+ * str = p;
+ return SUCCESS;
}
-/* Do those data_ops which can take a negative immediate constant */
-/* by altering the instuction. A bit of a hack really */
-/* MOV <-> MVN
+/* Do those data_ops which can take a negative immediate constant
+ by altering the instuction. A bit of a hack really.
+ MOV <-> MVN
AND <-> BIC
ADC <-> SBC
by inverting the second operand, and
ADD <-> SUB
CMP <-> CMN
- by negating the second operand.
-*/
+ by negating the second operand. */
+
static int
negate_data_op (instruction, value)
unsigned long * instruction;
op = (*instruction >> DATA_OP_SHIFT) & 0xf;
switch (op)
{
- /* First negates */
- case OPCODE_SUB: /* ADD <-> SUB */
+ /* First negates. */
+ case OPCODE_SUB: /* ADD <-> SUB */
new_inst = OPCODE_ADD;
value = negated;
break;
- case OPCODE_ADD:
- new_inst = OPCODE_SUB;
+ case OPCODE_ADD:
+ new_inst = OPCODE_SUB;
value = negated;
break;
- case OPCODE_CMP: /* CMP <-> CMN */
+ case OPCODE_CMP: /* CMP <-> CMN */
new_inst = OPCODE_CMN;
value = negated;
break;
- case OPCODE_CMN:
- new_inst = OPCODE_CMP;
+ case OPCODE_CMN:
+ new_inst = OPCODE_CMP;
value = negated;
break;
- /* Now Inverted ops */
- case OPCODE_MOV: /* MOV <-> MVN */
- new_inst = OPCODE_MVN;
+ /* Now Inverted ops. */
+ case OPCODE_MOV: /* MOV <-> MVN */
+ new_inst = OPCODE_MVN;
value = inverted;
break;
- case OPCODE_MVN:
+ case OPCODE_MVN:
new_inst = OPCODE_MOV;
value = inverted;
break;
- case OPCODE_AND: /* AND <-> BIC */
- new_inst = OPCODE_BIC;
+ case OPCODE_AND: /* AND <-> BIC */
+ new_inst = OPCODE_BIC;
value = inverted;
break;
- case OPCODE_BIC:
+ case OPCODE_BIC:
new_inst = OPCODE_AND;
value = inverted;
break;
- case OPCODE_ADC: /* ADC <-> SBC */
- new_inst = OPCODE_SBC;
+ case OPCODE_ADC: /* ADC <-> SBC */
+ new_inst = OPCODE_SBC;
value = inverted;
break;
- case OPCODE_SBC:
+ case OPCODE_SBC:
new_inst = OPCODE_ADC;
value = inverted;
break;
- /* We cannot do anything */
- default:
+ /* We cannot do anything. */
+ default:
return FAIL;
}
*instruction &= OPCODE_MASK;
*instruction |= new_inst << DATA_OP_SHIFT;
- return value;
+ return value;
}
static int
expressionS expr;
skip_whitespace (* str);
-
+
if (reg_required_here (str, 0) != FAIL)
{
if (skip_past_comma (str) == SUCCESS)
}
else
{
- /* Immediate expression */
+ /* Immediate expression. */
if (is_immediate_prefix (**str))
{
(*str)++;
inst.error = NULL;
-
+
if (my_get_expression (&inst.reloc.exp, str))
return FAIL;
{
if (skip_past_comma (str) == SUCCESS)
{
- /* #x, y -- ie explicit rotation by Y */
+ /* #x, y -- ie explicit rotation by Y. */
if (my_get_expression (&expr, str))
return FAIL;
inst.error = _("Constant expression expected");
return FAIL;
}
-
- /* Rotate must be a multiple of 2 */
+
+ /* Rotate must be a multiple of 2. */
if (((unsigned) expr.X_add_number) > 30
|| (expr.X_add_number & 1) != 0
|| ((unsigned) inst.reloc.exp.X_add_number) > 255)
return SUCCESS;
}
- /* Implicit rotation, select a suitable one */
+ /* Implicit rotation, select a suitable one. */
value = validate_immediate (inst.reloc.exp.X_add_number);
if (value == FAIL)
{
- /* Can't be done, perhaps the code reads something like
- "add Rd, Rn, #-n", where "sub Rd, Rn, #n" would be ok */
+ /* Can't be done. Perhaps the code reads something like
+ "add Rd, Rn, #-n", where "sub Rd, Rn, #n" would be OK. */
if ((value = negate_data_op (&inst.instruction,
inst.reloc.exp.X_add_number))
== FAIL)
return SUCCESS;
else
{
- /* Immediate expression */
+ /* Immediate expression. */
if (*((*str)++) == '#')
{
int i;
skip_whitespace (* str);
- /* First try and match exact strings, this is to guarantee that
- some formats will work even for cross assembly */
+ /* First try and match exact strings, this is to guarantee
+ that some formats will work even for cross assembly. */
for (i = 0; fp_const[i]; i++)
{
char *start = *str;
*str += strlen (fp_const[i]);
- if (is_end_of_line[(int)**str] || **str == '\0')
+ if (is_end_of_line[(unsigned char) **str])
{
inst.instruction |= i + 8;
return SUCCESS;
inst.error = _("Invalid floating point immediate expression");
return FAIL;
}
- inst.error = _("Floating point register or immediate expression expected");
+ inst.error =
+ _("Floating point register or immediate expression expected");
return FAIL;
}
}
static void
do_arit (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
static void
do_adr (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
/* This is a pseudo-op of the form "adr rd, label" to be converted
inst.error = BAD_ARGS;
return;
}
-
+
/* Frag hacking will turn this into a sub instruction if the offset turns
out to be negative. */
inst.reloc.type = BFD_RELOC_ARM_IMMEDIATE;
inst.reloc.exp.X_add_number -= 8; /* PC relative adjust. */
inst.reloc.pc_rel = 1;
inst.instruction |= flags;
-
+
end_of_line (str);
}
static void
do_adrl (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
/* This is a pseudo-op of the form "adrl rd, label" to be converted
into a relative address of the form:
add rd, pc, #low(label-.-8)"
- add rd, rd, #high(label-.-8)" */
+ add rd, rd, #high(label-.-8)" */
skip_whitespace (str);
inst.error = BAD_ARGS;
return;
}
-
+
end_of_line (str);
-
+
/* Frag hacking will turn this into a sub instruction if the offset turns
out to be negative. */
inst.reloc.type = BFD_RELOC_ARM_ADRL_IMMEDIATE;
- inst.reloc.exp.X_add_number -= 8; /* PC relative adjust */
+ inst.reloc.exp.X_add_number -= 8; /* PC relative adjust */
inst.reloc.pc_rel = 1;
inst.instruction |= flags;
inst.size = INSN_SIZE * 2;
-
+
return;
}
static void
do_cmp (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
static void
do_mov (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
{
int value = inst.reloc.exp.X_add_number;
- if ((hwse && (value < -255 || value > 255))
- || (value < -4095 || value > 4095))
+ if ((hwse && (value < -255 || value > 255))
+ || (value < -4095 || value > 4095))
{
inst.error = _("address offset too large");
return FAIL;
add = 0;
}
- /* Halfword and signextension instructions have the
- immediate value split across bits 11..8 and bits 3..0 */
- if (hwse)
- inst.instruction |= add | HWOFFSET_IMM | ((value >> 4) << 8) | (value & 0xF);
- else
- inst.instruction |= add | value;
+ /* Halfword and signextension instructions have the
+ immediate value split across bits 11..8 and bits 3..0. */
+ if (hwse)
+ inst.instruction |= (add | HWOFFSET_IMM
+ | ((value >> 4) << 8) | (value & 0xF));
+ else
+ inst.instruction |= add | value;
}
else
{
- if (hwse)
- {
- inst.instruction |= HWOFFSET_IMM;
- inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8;
- }
- else
- inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM;
+ if (hwse)
+ {
+ inst.instruction |= HWOFFSET_IMM;
+ inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8;
+ }
+ else
+ inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM;
inst.reloc.pc_rel = 0;
}
return SUCCESS;
case '-':
- add = 0; /* and fall through */
+ add = 0;
+ /* Fall through. */
+
case '+':
- (*str)++; /* and fall through */
+ (*str)++;
+ /* Fall through. */
+
default:
if (reg_required_here (str, 0) == FAIL)
return FAIL;
if (hwse)
- inst.instruction |= add;
+ inst.instruction |= add;
else
- {
- inst.instruction |= add | OFFSET_REG;
- if (skip_past_comma (str) == SUCCESS)
- return decode_shift (str, SHIFT_RESTRICT);
- }
+ {
+ inst.instruction |= add | OFFSET_REG;
+ if (skip_past_comma (str) == SUCCESS)
+ return decode_shift (str, SHIFT_RESTRICT);
+ }
return SUCCESS;
}
/* This is not ideal, but it is the simplest way of dealing with the
ARM7T halfword instructions (since they use a different
- encoding, but the same mnemonic): */
+ encoding, but the same mnemonic): */
halfword = (flags & 0x80000000) != 0;
if (halfword)
{
/* This is actually a load/store of a halfword, or a
- signed-extension load */
- if ((cpu_variant & ARM_HALFWORD) == 0)
- {
- inst.error
+ signed-extension load. */
+ if ((cpu_variant & ARM_EXT_HALFWORD) == 0)
+ {
+ inst.error
= _("Processor does not support halfwords or signed bytes");
- return;
- }
+ return;
+ }
- inst.instruction = (inst.instruction & COND_MASK)
- | (flags & ~COND_MASK);
+ inst.instruction = ((inst.instruction & COND_MASK)
+ | (flags & ~COND_MASK));
flags = 0;
}
skip_whitespace (str);
-
+
if ((conflict_reg = reg_required_here (& str, 12)) == FAIL)
{
if (!inst.error)
if (*str == ']')
{
str ++;
-
+
if (skip_past_comma (&str) == SUCCESS)
{
- /* [Rn],... (post inc) */
+ /* [Rn],... (post inc) */
if (ldst_extend (&str, halfword) == FAIL)
return;
if (conflict_reg)
- as_warn (_("%s register same as write-back base"),
- (inst.instruction & LOAD_BIT) ? _("destination") : _("source") );
+ {
+ if (flags & TRANS_BIT)
+ as_warn (_("Rn and Rd must be different in %s"),
+ ((inst.instruction & LOAD_BIT)
+ ? "LDRT" : "STRT"));
+ else
+ as_warn (_("%s register same as write-back base"),
+ ((inst.instruction & LOAD_BIT)
+ ? _("destination") : _("source")));
+ }
}
else
{
- /* [Rn] */
- if (halfword)
- inst.instruction |= HWOFFSET_IMM;
+ /* [Rn] */
+ if (halfword)
+ inst.instruction |= HWOFFSET_IMM;
- skip_whitespace (str);
+ skip_whitespace (str);
- if (*str == '!')
- {
- if (conflict_reg)
- as_warn (_("%s register same as write-back base"),
- (inst.instruction & LOAD_BIT) ? _("destination") : _("source") );
- str++;
- inst.instruction |= WRITE_BACK;
- }
+ if (*str == '!')
+ {
+ if (conflict_reg)
+ as_warn (_("%s register same as write-back base"),
+ ((inst.instruction & LOAD_BIT)
+ ? _("destination") : _("source")));
+ str++;
+ inst.instruction |= WRITE_BACK;
+ }
flags |= INDEX_UP;
- if (! (flags & TRANS_BIT))
- pre_inc = 1;
+ if (flags & TRANS_BIT)
+ {
+ if (conflict_reg)
+ as_warn (_("Rn and Rd must be different in %s"),
+ ((inst.instruction & LOAD_BIT)
+ ? "LDRT" : "STRT"));
+ }
+ else
+ pre_inc = 1;
}
}
else
{
- /* [Rn,...] */
+ /* [Rn,...] */
if (skip_past_comma (&str) == FAIL)
{
inst.error = _("pre-indexed expression expected");
{
if (conflict_reg)
as_warn (_("%s register same as write-back base"),
- (inst.instruction & LOAD_BIT) ? _("destination") : _("source") );
+ ((inst.instruction & LOAD_BIT)
+ ? _("destination") : _("source")));
str++;
inst.instruction |= WRITE_BACK;
}
}
else if (*str == '=')
{
- /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op */
+ /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op. */
str++;
skip_whitespace (str);
}
if (inst.reloc.exp.X_op == O_constant
- && (value = validate_immediate(inst.reloc.exp.X_add_number)) != FAIL)
+ && (value = validate_immediate (inst.reloc.exp.X_add_number)) != FAIL)
{
- /* This can be done with a mov instruction */
+ /* This can be done with a mov instruction. */
inst.instruction &= LITERAL_MASK;
inst.instruction |= INST_IMMEDIATE | (OPCODE_MOV << DATA_OP_SHIFT);
inst.instruction |= (flags & COND_MASK) | (value & 0xfff);
- end_of_line(str);
- return;
+ end_of_line (str);
+ return;
}
else
{
- /* Insert into literal pool */
+ /* Insert into literal pool. */
if (add_to_lit_pool () == FAIL)
{
if (!inst.error)
- inst.error = _("literal pool insertion failed");
+ inst.error = _("literal pool insertion failed");
return;
}
- /* Change the instruction exp to point to the pool */
- if (halfword)
- {
- inst.instruction |= HWOFFSET_IMM;
- inst.reloc.type = BFD_RELOC_ARM_HWLITERAL;
- }
- else
+ /* Change the instruction exp to point to the pool. */
+ if (halfword)
+ {
+ inst.instruction |= HWOFFSET_IMM;
+ inst.reloc.type = BFD_RELOC_ARM_HWLITERAL;
+ }
+ else
inst.reloc.type = BFD_RELOC_ARM_LITERAL;
inst.reloc.pc_rel = 1;
inst.instruction |= (REG_PC << 16);
- pre_inc = 1;
+ pre_inc = 1;
}
}
else
return;
if (halfword)
- {
- inst.instruction |= HWOFFSET_IMM;
- inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8;
- }
+ {
+ inst.instruction |= HWOFFSET_IMM;
+ inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8;
+ }
else
- inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM;
+ inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM;
#ifndef TE_WINCE
- inst.reloc.exp.X_add_number -= 8; /* PC rel adjust */
+ /* PC rel adjust. */
+ inst.reloc.exp.X_add_number -= 8;
#endif
inst.reloc.pc_rel = 1;
inst.instruction |= (REG_PC << 16);
pre_inc = 1;
}
-
+
if (pre_inc && (flags & TRANS_BIT))
inst.error = _("Pre-increment instruction with translate");
reg_list (strp)
char ** strp;
{
- char * str = *strp;
+ char * str = * strp;
long range = 0;
int another_range;
- /* We come back here if we get ranges concatenated by '+' or '|' */
+ /* We come back here if we get ranges concatenated by '+' or '|'. */
do
{
another_range = 0;
{
int in_range = 0;
int cur_reg = -1;
-
+
str++;
do
{
int reg;
-
+
skip_whitespace (str);
if ((reg = reg_required_here (& str, -1)) == FAIL)
return FAIL;
-
+
if (in_range)
{
int i;
-
+
if (reg <= cur_reg)
{
inst.error = _("Bad range in register list");
for (i = cur_reg + 1; i < reg; i++)
{
if (range & (1 << i))
- as_tsktsk
+ as_tsktsk
(_("Warning: Duplicated register (r%d) in register list"),
i);
else
range |= 1 << reg;
cur_reg = reg;
- } while (skip_past_comma (&str) != FAIL
- || (in_range = 1, *str++ == '-'));
+ }
+ while (skip_past_comma (&str) != FAIL
+ || (in_range = 1, *str++ == '-'));
str--;
skip_whitespace (str);
if (expr.X_op == O_constant)
{
- if (expr.X_add_number
+ if (expr.X_add_number
!= (expr.X_add_number & 0x0000ffff))
{
inst.error = _("invalid register mask");
regno &= -regno;
regno = (1 << regno) - 1;
- as_tsktsk
+ as_tsktsk
(_("Warning: Duplicated register (r%d) in register list"),
regno);
}
str++;
another_range = 1;
}
- } while (another_range);
+ }
+ while (another_range);
*strp = str;
return range;
static void
do_ldmstm (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
int base_reg;
static void
do_swi (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
-
+
/* Allow optional leading '#'. */
if (is_immediate_prefix (*str))
str++;
inst.reloc.type = BFD_RELOC_ARM_SWI;
inst.reloc.pc_rel = 0;
inst.instruction |= flags;
-
+
end_of_line (str);
-
+
return;
}
static void
do_swap (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
int reg;
-
+
skip_whitespace (str);
if ((reg = reg_required_here (&str, 12)) == FAIL)
static void
do_branch (str, flags)
- char * str;
+ char * str;
unsigned long flags ATTRIBUTE_UNUSED;
{
if (my_get_expression (&inst.reloc.exp, &str))
return;
-
+
#ifdef OBJ_ELF
{
char * save_in;
-
- /* ScottB: February 5, 1998 */
- /* Check to see of PLT32 reloc required for the instruction. */
-
- /* arm_parse_reloc() works on input_line_pointer.
+
+ /* ScottB: February 5, 1998 - Check to see of PLT32 reloc
+ required for the instruction. */
+
+ /* arm_parse_reloc () works on input_line_pointer.
We actually want to parse the operands to the branch instruction
passed in 'str'. Save the input pointer and restore it later. */
save_in = input_line_pointer;
#else
inst.reloc.type = BFD_RELOC_ARM_PCREL_BRANCH;
inst.reloc.pc_rel = 1;
-#endif /* OBJ_ELF */
-
+#endif /* OBJ_ELF */
+
end_of_line (str);
return;
}
static void
do_bx (str, flags)
- char * str;
+ char * str;
unsigned long flags ATTRIBUTE_UNUSED;
{
int reg;
return;
}
+ /* Note - it is not illegal to do a "bx pc". Useless, but not illegal. */
if (reg == REG_PC)
- inst.error = BAD_PC;
+ as_tsktsk (_("Use of r15 in bx in ARM mode is not really useful"));
end_of_line (str);
}
static void
do_cdp (str, flags)
- char * str;
+ char * str;
unsigned long flags ATTRIBUTE_UNUSED;
{
/* Co-processor data operation.
static void
do_lstc (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
/* Co-processor register load/store.
static void
do_co_reg (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
/* Co-processor register transfer.
static void
do_fp_ctrl (str, flags)
- char * str;
+ char * str;
unsigned long flags ATTRIBUTE_UNUSED;
{
/* FP control registers.
static void
do_fp_ldst (str, flags)
- char * str;
+ char * str;
unsigned long flags ATTRIBUTE_UNUSED;
{
skip_whitespace (str);
static void
do_fp_ldmstm (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
int num_regs;
return;
}
- /* Get Number of registers to transfer */
+ /* Get Number of registers to transfer. */
if (skip_past_comma (&str) == FAIL
|| my_get_expression (&inst.reloc.exp, &str))
{
str++;
if (reg == REG_PC)
{
- inst.error = _("R15 not allowed as base register with write-back");
+ inst.error =
+ _("R15 not allowed as base register with write-back");
return;
}
}
if (flags & CP_T_Pre)
{
- /* Pre-decrement */
+ /* Pre-decrement. */
offset = 3 * num_regs;
if (write_back)
flags |= CP_T_WB;
}
else
{
- /* Post-increment */
+ /* Post-increment. */
if (write_back)
{
flags |= CP_T_WB;
static void
do_fp_dyadic (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
static void
do_fp_monadic (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
static void
do_fp_cmp (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
static void
do_fp_from_reg (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
static void
do_fp_to_reg (str, flags)
- char * str;
+ char * str;
unsigned long flags;
{
skip_whitespace (str);
return;
}
-/* Thumb specific routines */
+/* Thumb specific routines. */
/* Parse and validate that a register is of the right form, this saves
- repeated checking of this information in many similar cases.
- Unlike the 32-bit case we do not insert the register into the opcode
- here, since the position is often unknown until the full instruction
+ repeated checking of this information in many similar cases.
+ Unlike the 32-bit case we do not insert the register into the opcode
+ here, since the position is often unknown until the full instruction
has been parsed. */
+
static int
thumb_reg (strp, hi_lo)
char ** strp;
/* Parse an add or subtract instruction, SUBTRACT is non-zero if the opcode
was SUB. */
+
static void
thumb_add_sub (str, subtract)
char * str;
if (skip_past_comma (&str) == FAIL)
{
- /* Two operand format, shuffle the registers and pretend there
- are 3 */
+ /* Two operand format, shuffle the registers
+ and pretend there are 3. */
Rn = Rs;
Rs = Rd;
}
}
/* We now have Rd and Rs set to registers, and Rn set to a register or FAIL;
- for the latter case, EXPR contains the immediate that was found. */
+ for the latter case, EXPR contains the immediate that was found. */
if (Rn != FAIL)
{
/* All register format. */
return;
}
- /* Can't do this for SUB */
+ /* Can't do this for SUB. */
if (subtract)
{
inst.error = _("subtract valid only on lo regs");
if (inst.reloc.exp.X_op != O_constant)
{
/* Value isn't known yet, all we can do is store all the fragments
- we know about in the instruction and let the reloc hacking
+ we know about in the instruction and let the reloc hacking
work it all out. */
inst.instruction = (subtract ? 0x8000 : 0) | (Rd << 4) | Rs;
inst.reloc.type = BFD_RELOC_ARM_THUMB_ADD;
offset = -offset;
subtract = 1;
- /* Quick check, in case offset is MIN_INT */
+ /* Quick check, in case offset is MIN_INT. */
if (offset < 0)
{
inst.error = _("immediate value out of range");
}
}
}
-
+
end_of_line (str);
}
}
else
{
- if ((Rs = thumb_reg (&str, THUMB_REG_LO)) == FAIL)
+ if ((Rs = thumb_reg (&str, THUMB_REG_LO)) == FAIL)
return;
if (skip_past_comma (&str) == FAIL)
{
- /* Two operand format, shuffle the registers and pretend there
- are 3 */
+ /* Two operand format, shuffle the registers
+ and pretend there are 3. */
Rn = Rs;
Rs = Rd;
}
}
/* We now have Rd and Rs set to registers, and Rn set to a register or FAIL;
- for the latter case, EXPR contains the immediate that was found. */
+ for the latter case, EXPR contains the immediate that was found. */
if (Rn != FAIL)
{
if (inst.reloc.exp.X_op != O_constant)
{
/* Value isn't known yet, create a dummy reloc and let reloc
- hacking fix it up */
-
+ hacking fix it up. */
inst.reloc.type = BFD_RELOC_ARM_THUMB_SHIFT;
}
else
return;
}
- /* Shifts of zero are handled by converting to LSL */
+ /* Shifts of zero are handled by converting to LSL. */
if (shift_value == 0)
inst.instruction = T_OPCODE_LSL_I;
- /* Shifts of 32 are encoded as a shift of zero */
+ /* Shifts of 32 are encoded as a shift of zero. */
if (shift_value == 32)
shift_value = 0;
inst.instruction |= Rd | (Rs << 3);
}
-
+
end_of_line (str);
}
{
if (move == THUMB_MOVE)
/* A move of two lowregs is encoded as ADD Rd, Rs, #0
- since a MOV instruction produces unpredictable results */
+ since a MOV instruction produces unpredictable results. */
inst.instruction = T_OPCODE_ADD_I3;
else
inst.instruction = T_OPCODE_CMP_LR;
}
else if (*str == '=')
{
- /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op */
+ /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op. */
str++;
skip_whitespace (str);
return;
end_of_line (str);
-
+
if ( inst.reloc.exp.X_op != O_constant
&& inst.reloc.exp.X_op != O_symbol)
{
if (inst.reloc.exp.X_op == O_constant
&& ((inst.reloc.exp.X_add_number & ~0xFF) == 0))
{
- /* This can be done with a mov instruction */
+ /* This can be done with a mov instruction. */
inst.instruction = T_OPCODE_MOV_I8 | (Rd << 8);
inst.instruction |= inst.reloc.exp.X_add_number;
- return;
+ return;
}
- /* Insert into literal pool */
+ /* Insert into literal pool. */
if (add_to_lit_pool () == FAIL)
{
if (!inst.error)
- inst.error = "literal pool insertion failed";
+ inst.error = "literal pool insertion failed";
return;
}
inst.reloc.type = BFD_RELOC_ARM_THUMB_OFFSET;
inst.reloc.pc_rel = 1;
inst.instruction = T_OPCODE_LDR_PC | (Rd << 8);
- inst.reloc.exp.X_add_number += 4; /* Adjust ARM pipeline offset to Thumb */
+ /* Adjust ARM pipeline offset to Thumb. */
+ inst.reloc.exp.X_add_number += 4;
return;
}
inst.instruction = T_OPCODE_LDR_PC | (Rd << 8);
inst.reloc.pc_rel = 1;
- inst.reloc.exp.X_add_number -= 4; /* Pipeline offset */
+ inst.reloc.exp.X_add_number -= 4; /* Pipeline offset. */
inst.reloc.type = BFD_RELOC_ARM_THUMB_OFFSET;
end_of_line (str);
return;
}
else if (Ro == FAIL)
{
- /* Immediate offset */
+ /* Immediate offset. */
if (size == THUMB_WORD)
inst.instruction = (load_store == THUMB_LOAD
? T_OPCODE_LDR_IW : T_OPCODE_STR_IW);
if (inst.reloc.exp.X_op == O_constant)
{
unsigned offset = inst.reloc.exp.X_add_number;
-
+
if (offset & ~(0x1f << size))
{
inst.error = _("Invalid offset");
}
else
{
- /* Register offset */
+ /* Register offset. */
if (size == THUMB_WORD)
inst.instruction = (load_store == THUMB_LOAD
? T_OPCODE_LDR_RW : T_OPCODE_STR_RW);
do_t_nop (str)
char * str;
{
- /* Do nothing */
+ /* Do nothing. */
end_of_line (str);
return;
}
-/* Handle the Format 4 instructions that do not have equivalents in other
+/* Handle the Format 4 instructions that do not have equivalents in other
formats. That is, ADC, AND, EOR, SBC, ROR, TST, NEG, CMN, ORR, MUL,
BIC and MVN. */
+
static void
do_t_arit (str)
char * str;
|| skip_past_comma (&str) == FAIL
|| (Rs = thumb_reg (&str, THUMB_REG_LO)) == FAIL)
{
- inst.error = BAD_ARGS;
- return;
+ inst.error = BAD_ARGS;
+ return;
}
if (skip_past_comma (&str) != FAIL)
if (inst.instruction == T_OPCODE_TST
|| inst.instruction == T_OPCODE_CMN
|| inst.instruction == T_OPCODE_NEG
- || inst.instruction == T_OPCODE_MVN)
+ || inst.instruction == T_OPCODE_MVN)
{
inst.error = BAD_ARGS;
return;
if (Rs != Rd)
{
- inst.error = _("dest and source1 one must be the same register");
+ inst.error = _("dest and source1 must be the same register");
return;
}
Rs = Rn;
const char * name = S_GET_NAME (symbolP);
symbolS * new_target;
- /* This definiton must agree with the one in gcc/config/arm/thumb.c */
+ /* This definiton must agree with the one in gcc/config/arm/thumb.c. */
#define STUB_NAME ".real_start_of"
if (name == NULL)
- abort();
+ abort ();
/* Names that start with '.' are local labels, not function entry points.
The compiler may generate BL instructions to these labels because it
needs to perform a branch to a far away location. */
if (name[0] == '.')
return symbolP;
-
+
real_start = malloc (strlen (name) + strlen (STUB_NAME) + 1);
sprintf (real_start, "%s%s", STUB_NAME, name);
new_target = symbol_find (real_start);
-
+
if (new_target == NULL)
{
as_warn ("Failed to find real start of function: %s\n", name);
return new_target;
}
-
static void
do_t_branch23 (str)
char * str;
{
if (my_get_expression (& inst.reloc.exp, & str))
return;
-
+
inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH23;
inst.reloc.pc_rel = 1;
end_of_line (str);
&& inst.reloc.exp.X_add_symbol != NULL
&& S_IS_DEFINED (inst.reloc.exp.X_add_symbol)
&& ! THUMB_IS_FUNC (inst.reloc.exp.X_add_symbol))
- inst.reloc.exp.X_add_symbol = find_real_start (inst.reloc.exp.X_add_symbol);
+ inst.reloc.exp.X_add_symbol =
+ find_real_start (inst.reloc.exp.X_add_symbol);
}
static void
if (inst.reloc.type != BFD_RELOC_NONE)
{
- /* This really doesn't seem worth it. */
+ /* This really doesn't seem worth it. */
inst.reloc.type = BFD_RELOC_NONE;
inst.error = _("Expression too complex");
return;
if (inst.reloc.type != BFD_RELOC_NONE)
{
- /* This really doesn't seem worth it. */
+ /* This really doesn't seem worth it. */
inst.reloc.type = BFD_RELOC_NONE;
inst.error = _("Expression too complex");
return;
inst.reloc.exp.X_add_number -= 4; /* PC relative adjust. */
inst.reloc.pc_rel = 1;
inst.instruction |= REG_PC; /* Rd is already placed into the instruction. */
-
+
end_of_line (str);
}
insert_reg (entry)
int entry;
{
- int len = strlen (reg_table[entry].name) + 2;
- char * buf = (char *) xmalloc (len);
+ int len = strlen (reg_table[entry].name) + 2;
+ char * buf = (char *) xmalloc (len);
char * buf2 = (char *) xmalloc (len);
- int i = 0;
+ int i = 0;
#ifdef REGISTER_PREFIX
buf[i++] = REGISTER_PREFIX;
buf2[i] = '\0';
- hash_insert (arm_reg_hsh, buf, (PTR) ®_table[entry]);
- hash_insert (arm_reg_hsh, buf2, (PTR) ®_table[entry]);
+ hash_insert (arm_reg_hsh, buf, (PTR) & reg_table[entry]);
+ hash_insert (arm_reg_hsh, buf2, (PTR) & reg_table[entry]);
}
static void
int regnum;
{
struct reg_entry *new =
- (struct reg_entry *)xmalloc (sizeof (struct reg_entry));
+ (struct reg_entry *) xmalloc (sizeof (struct reg_entry));
char *name = xmalloc (strlen (str) + 1);
strcpy (name, str);
int i;
for (i = 0; i < NUM_FLOAT_VALS; i++)
- if (atof_ieee ((char *)fp_const[i], 'x', fp_values[i]) == NULL)
+ if (atof_ieee ((char *) fp_const[i], 'x', fp_values[i]) == NULL)
abort ();
}
{
unsigned mach;
unsigned int i;
-
+
if ( (arm_ops_hsh = hash_new ()) == NULL
|| (arm_tops_hsh = hash_new ()) == NULL
|| (arm_cond_hsh = hash_new ()) == NULL
|| (arm_reg_hsh = hash_new ()) == NULL
|| (arm_psr_hsh = hash_new ()) == NULL)
as_fatal (_("Virtual memory exhausted"));
-
+
for (i = 0; i < sizeof (insns) / sizeof (struct asm_opcode); i++)
hash_insert (arm_ops_hsh, insns[i].template, (PTR) (insns + i));
for (i = 0; i < sizeof (tinsns) / sizeof (struct thumb_opcode); i++)
hash_insert (arm_tops_hsh, tinsns[i].template, (PTR) (tinsns + i));
for (i = 0; i < sizeof (conds) / sizeof (struct asm_cond); i++)
hash_insert (arm_cond_hsh, conds[i].template, (PTR) (conds + i));
- for (i = 0; i < sizeof (shift) / sizeof (struct asm_shift); i++)
- hash_insert (arm_shift_hsh, shift[i].template, (PTR) (shift + i));
+ for (i = 0; i < sizeof (shift_names) / sizeof (struct asm_shift_name); i++)
+ hash_insert (arm_shift_hsh, shift_names[i].name, (PTR) (shift_names + i));
for (i = 0; i < sizeof (psrs) / sizeof (struct asm_psr); i++)
hash_insert (arm_psr_hsh, psrs[i].template, (PTR) (psrs + i));
#if defined OBJ_COFF || defined OBJ_ELF
{
unsigned int flags = 0;
-
+
/* Set the flags in the private structure. */
if (uses_apcs_26) flags |= F_APCS26;
if (support_interwork) flags |= F_INTERWORK;
if ((cpu_variant & FPU_ALL) == FPU_NONE) flags |= F_SOFT_FLOAT;
bfd_set_private_flags (stdoutput, flags);
+
+ /* We have run out flags in the COFF header to encode the
+ status of ATPCS support, so instead we create a dummy,
+ empty, debug section called .arm.atpcs. */
+ if (atpcs)
+ {
+ asection * sec;
+
+ sec = bfd_make_section (stdoutput, ".arm.atpcs");
+
+ if (sec != NULL)
+ {
+ bfd_set_section_flags
+ (stdoutput, sec, SEC_READONLY | SEC_DEBUGGING /* | SEC_HAS_CONTENTS */);
+ bfd_set_section_size (stdoutput, sec, 0);
+ bfd_set_section_contents (stdoutput, sec, NULL, 0, 0);
+ }
+ }
}
#endif
-
+
/* Record the CPU type as well. */
switch (cpu_variant & ARM_CPU_MASK)
{
case ARM_2:
mach = bfd_mach_arm_2;
break;
-
+
case ARM_3: /* Also ARM_250. */
mach = bfd_mach_arm_2a;
break;
-
+
default:
case ARM_6 | ARM_3 | ARM_2: /* Actually no CPU type defined. */
mach = bfd_mach_arm_4;
break;
-
+
case ARM_7: /* Also ARM_6. */
mach = bfd_mach_arm_3;
break;
}
-
+
/* Catch special cases. */
- if (cpu_variant != (FPU_DEFAULT | CPU_DEFAULT))
+ if (cpu_variant & ARM_EXT_XSCALE)
+ mach = bfd_mach_arm_XScale;
+ else if (cpu_variant & ARM_EXT_V5E)
+ mach = bfd_mach_arm_5TE;
+ else if (cpu_variant & ARM_EXT_V5)
{
- if (cpu_variant & (ARM_EXT_V5 & ARM_THUMB))
+ if (cpu_variant & ARM_EXT_THUMB)
mach = bfd_mach_arm_5T;
- else if (cpu_variant & ARM_EXT_V5)
+ else
mach = bfd_mach_arm_5;
- else if (cpu_variant & ARM_THUMB)
+ }
+ else if (cpu_variant & ARM_EXT_HALFWORD)
+ {
+ if (cpu_variant & ARM_EXT_THUMB)
mach = bfd_mach_arm_4T;
- else if ((cpu_variant & ARM_ARCH_V4) == ARM_ARCH_V4)
+ else
mach = bfd_mach_arm_4;
- else if (cpu_variant & ARM_LONGMUL)
- mach = bfd_mach_arm_3M;
}
-
+ else if (cpu_variant & ARM_EXT_LONGMUL)
+ mach = bfd_mach_arm_3M;
+
bfd_set_arch_mach (stdoutput, TARGET_ARCH, mach);
}
THE RIGHT THING, whatever it is. Possible values for n are 1 (byte)
2 (short) and 4 (long) Floating numbers are put out as a series of
LITTLENUMS (shorts, here at least). */
+
void
md_number_to_chars (buf, val, n)
char * buf;
number_to_chars_littleendian (buf, val, n);
}
-static valueT
+static valueT
md_chars_to_number (buf, n)
char * buf;
- int n;
+ int n;
{
valueT result = 0;
unsigned char * where = (unsigned char *) buf;
}
/* Turn a string in input_line_pointer into a floating point constant
- of type TYPE, and store the appropriate bytes in *litP. The number
- of LITTLENUMS emitted is stored in *sizeP . An error message is
+ of type TYPE, and store the appropriate bytes in *LITP. The number
+ of LITTLENUMS emitted is stored in *SIZEP. An error message is
returned, or NULL on OK.
Note that fp constants aren't represent in the normal way on the ARM.
return 0;
}
-/* The knowledge of the PC's pipeline offset is built into the insns themselves. */
+/* The knowledge of the PC's pipeline offset is built into the insns
+ themselves. */
+
long
md_pcrel_from (fixP)
fixS * fixP;
{
- if ( fixP->fx_addsy
+ if (fixP->fx_addsy
&& S_GET_SEGMENT (fixP->fx_addsy) == undefined_section
&& fixP->fx_subsy == NULL)
return 0;
-
+
if (fixP->fx_pcrel && (fixP->fx_r_type == BFD_RELOC_ARM_THUMB_ADD))
{
/* PC relative addressing on the Thumb is slightly odd
#endif
}
-/* Round up a section size to the appropriate boundary. */
+/* Round up a section size to the appropriate boundary. */
+
valueT
md_section_align (segment, size)
segT segment ATTRIBUTE_UNUSED;
#ifdef OBJ_ELF
return size;
#else
- /* Round all sects to multiple of 4 */
+ /* Round all sects to multiple of 4. */
return (size + 3) & ~3;
#endif
}
-/* Under ELF we need to default _GLOBAL_OFFSET_TABLE. Otherwise
- we have no need to default values of symbols. */
+/* Under ELF we need to default _GLOBAL_OFFSET_TABLE.
+ Otherwise we have no need to default values of symbols. */
-/* ARGSUSED */
symbolS *
md_undefined_symbol (name)
char * name ATTRIBUTE_UNUSED;
{
if (symbol_find (name))
as_bad ("GOT already in the symbol table");
-
+
GOT_symbol = symbol_new (name, undefined_section,
- (valueT)0, & zero_address_frag);
+ (valueT) 0, & zero_address_frag);
}
-
+
return GOT_symbol;
}
#endif
-
+
return 0;
}
-/* arm_reg_parse () := if it looks like a register, return its token and
- advance the pointer. */
+/* arm_reg_parse () := if it looks like a register, return its token and
+ advance the pointer. */
static int
arm_reg_parse (ccp)
*--p = 0;
reg = (struct reg_entry *) hash_find (arm_reg_hsh, start);
*p = c;
-
+
if (reg)
{
*ccp = p;
int
md_apply_fix3 (fixP, val, seg)
- fixS * fixP;
- valueT * val;
- segT seg;
+ fixS * fixP;
+ valueT * val;
+ segT seg;
{
offsetT value = * val;
offsetT newval;
assert (fixP->fx_r_type < BFD_RELOC_UNUSED);
/* Note whether this will delete the relocation. */
-#if 0 /* patch from REarnshaw to JDavis (disabled for the moment, since it doesn't work fully) */
+#if 0
+ /* Patch from REarnshaw to JDavis (disabled for the moment, since it
+ doesn't work fully.) */
if ((fixP->fx_addsy == 0 || symbol_constant_p (fixP->fx_addsy))
&& !fixP->fx_pcrel)
#else
{
if (target_oabi
&& (fixP->fx_r_type == BFD_RELOC_ARM_PCREL_BRANCH
- || fixP->fx_r_type == BFD_RELOC_ARM_PCREL_BLX
- ))
+ || fixP->fx_r_type == BFD_RELOC_ARM_PCREL_BLX
+ ))
value = 0;
else
value += md_pcrel_from (fixP);
}
}
- fixP->fx_addnumber = value; /* Remember value for emit_reloc. */
+ /* Remember value for emit_reloc. */
+ fixP->fx_addnumber = value;
switch (fixP->fx_r_type)
{
case BFD_RELOC_ARM_ADRL_IMMEDIATE:
{
unsigned int highpart = 0;
- unsigned int newinsn = 0xe1a00000; /* nop */
+ unsigned int newinsn = 0xe1a00000; /* nop. */
newimm = validate_immediate (value);
temp = md_chars_to_number (buf, INSN_SIZE);
if (newimm == (unsigned int) FAIL
&& (newimm = negate_data_op (& temp, value)) == (unsigned int) FAIL)
{
- /* No ? OK - try using two ADD instructions to generate the value. */
+ /* No ? OK - try using two ADD instructions to generate
+ the value. */
newimm = validate_immediate_twopart (value, & highpart);
- /* Yes - then make sure that the second instruction is also an add. */
+ /* Yes - then make sure that the second instruction is
+ also an add. */
if (newimm != (unsigned int) FAIL)
newinsn = temp;
/* Still No ? Try using a negated value. */
- else if (validate_immediate_twopart (- value, & highpart) != (unsigned int) FAIL)
- temp = newinsn = (temp & OPCODE_MASK) | OPCODE_SUB << DATA_OP_SHIFT;
+ else if ((newimm = validate_immediate_twopart (- value, & highpart)) != (unsigned int) FAIL)
+ temp = newinsn = (temp & OPCODE_MASK) | OPCODE_SUB << DATA_OP_SHIFT;
/* Otherwise - give up. */
else
{
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Unable to compute ADRL instructions for PC offset of 0x%x"), value);
+ _("Unable to compute ADRL instructions for PC offset of 0x%lx"),
+ value);
break;
}
- /* Replace the first operand in the 2nd instruction (which is the PC)
- with the destination register. We have already added in the PC in the
- first instruction and we do not want to do it again. */
+ /* Replace the first operand in the 2nd instruction (which
+ is the PC) with the destination register. We have
+ already added in the PC in the first instruction and we
+ do not want to do it again. */
newinsn &= ~ 0xf0000;
newinsn |= ((newinsn & 0x0f000) << 4);
}
case BFD_RELOC_ARM_OFFSET_IMM:
sign = value >= 0;
-
+
if (value < 0)
value = - value;
-
+
if (validate_offset_imm (value, 0) == FAIL)
- {
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("bad immediate value for offset (%ld)"), (long) value);
- break;
- }
+ {
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("bad immediate value for offset (%ld)"),
+ (long) value);
+ break;
+ }
newval = md_chars_to_number (buf, INSN_SIZE);
newval &= 0xff7ff000;
md_number_to_chars (buf, newval, INSN_SIZE);
break;
- case BFD_RELOC_ARM_OFFSET_IMM8:
- case BFD_RELOC_ARM_HWLITERAL:
+ case BFD_RELOC_ARM_OFFSET_IMM8:
+ case BFD_RELOC_ARM_HWLITERAL:
sign = value >= 0;
-
+
if (value < 0)
value = - value;
if (validate_offset_imm (value, 1) == FAIL)
- {
- if (fixP->fx_r_type == BFD_RELOC_ARM_HWLITERAL)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("invalid literal constant: pool needs to be closer"));
- else
- as_bad (_("bad immediate value for half-word offset (%ld)"),
+ {
+ if (fixP->fx_r_type == BFD_RELOC_ARM_HWLITERAL)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("invalid literal constant: pool needs to be closer"));
+ else
+ as_bad (_("bad immediate value for half-word offset (%ld)"),
(long) value);
- break;
- }
+ break;
+ }
newval = md_chars_to_number (buf, INSN_SIZE);
newval &= 0xff7ff0f0;
case BFD_RELOC_ARM_LITERAL:
sign = value >= 0;
-
+
if (value < 0)
value = - value;
if (validate_offset_imm (value, 0) == FAIL)
{
- as_bad_where (fixP->fx_file, fixP->fx_line,
+ as_bad_where (fixP->fx_file, fixP->fx_line,
_("invalid literal constant: pool needs to be closer"));
break;
}
case BFD_RELOC_ARM_SHIFT_IMM:
newval = md_chars_to_number (buf, INSN_SIZE);
if (((unsigned long) value) > 32
- || (value == 32
+ || (value == 32
&& (((newval & 0x60) == 0) || (newval & 0x60) == 0x60)))
{
as_bad_where (fixP->fx_file, fixP->fx_line,
}
if (value == 0)
- newval &= ~0x60; /* Shifts of zero must be done as lsl */
+ /* Shifts of zero must be done as lsl. */
+ newval &= ~0x60;
else if (value == 32)
value = 0;
newval &= 0xfffff07f;
newval |= (value & 0x1f) << 7;
- md_number_to_chars (buf, newval , INSN_SIZE);
+ md_number_to_chars (buf, newval, INSN_SIZE);
break;
case BFD_RELOC_ARM_SWI:
else
{
if (((unsigned long) value) > 0x00ffffff)
- as_bad_where (fixP->fx_file, fixP->fx_line,
+ as_bad_where (fixP->fx_file, fixP->fx_line,
_("Invalid swi expression"));
newval = md_chars_to_number (buf, INSN_SIZE) & 0xff000000;
newval |= value;
- md_number_to_chars (buf, newval , INSN_SIZE);
+ md_number_to_chars (buf, newval, INSN_SIZE);
}
break;
that the destination of the branch is in the same section as the
branch instruciton itself, then we can compute the relocation for
ourselves and not have to bother the linker with it.
-
+
FIXME: The tests for OBJ_ELF and ! target_oabi are only here
because I have not worked out how to do this for OBJ_COFF or
target_oabi. */
/* Get pc relative value to go into the branch. */
value = * val;
- /* Permit a backward branch provided that enough bits are set.
- Allow a forwards branch, provided that enough bits are clear. */
- if ((value & ~ ((offsetT) 0x1ffffff)) == ~ ((offsetT) 0x1ffffff)
+ /* Permit a backward branch provided that enough bits
+ are set. Allow a forwards branch, provided that
+ enough bits are clear. */
+ if ( (value & ~ ((offsetT) 0x1ffffff)) == ~ ((offsetT) 0x1ffffff)
|| (value & ~ ((offsetT) 0x1ffffff)) == 0)
fixP->fx_done = 1;
}
-
+
if (! fixP->fx_done)
#endif
as_bad_where (fixP->fx_file, fixP->fx_line,
value >>= 2;
value += SEXT24 (newval);
-
- if ((value & ~ ((offsetT) 0xffffff)) != 0
+
+ if ( (value & ~ ((offsetT) 0xffffff)) != 0
&& ((value & ~ ((offsetT) 0xffffff)) != ~ ((offsetT) 0xffffff)))
as_bad_where (fixP->fx_file, fixP->fx_line,
_("out of range branch"));
-
+
newval = (value & 0x00ffffff) | (newval & 0xff000000);
md_number_to_chars (buf, newval, INSN_SIZE);
break;
case BFD_RELOC_ARM_PCREL_BLX:
{
offsetT hbit;
- newval = md_chars_to_number (buf, INSN_SIZE);
+ newval = md_chars_to_number (buf, INSN_SIZE);
#ifdef OBJ_ELF
- if (! target_oabi)
- value = fixP->fx_offset;
+ if (! target_oabi)
+ value = fixP->fx_offset;
#endif
hbit = (value >> 1) & 1;
- value = (value >> 2) & 0x00ffffff;
- value = (value + (newval & 0x00ffffff)) & 0x00ffffff;
- newval = value | (newval & 0xfe000000) | (hbit << 24);
- md_number_to_chars (buf, newval, INSN_SIZE);
+ value = (value >> 2) & 0x00ffffff;
+ value = (value + (newval & 0x00ffffff)) & 0x00ffffff;
+ newval = value | (newval & 0xfe000000) | (hbit << 24);
+ md_number_to_chars (buf, newval, INSN_SIZE);
}
break;
- case BFD_RELOC_THUMB_PCREL_BRANCH9: /* conditional branch */
+ case BFD_RELOC_THUMB_PCREL_BRANCH9: /* Conditional branch. */
newval = md_chars_to_number (buf, THUMB_SIZE);
{
- addressT diff = (newval & 0xff) << 1;
- if (diff & 0x100)
- diff |= ~0xff;
-
- value += diff;
- if ((value & ~0xff) && ((value & ~0xff) != ~0xff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch out of range"));
- newval = (newval & 0xff00) | ((value & 0x1ff) >> 1);
+ addressT diff = (newval & 0xff) << 1;
+ if (diff & 0x100)
+ diff |= ~0xff;
+
+ value += diff;
+ if ((value & ~0xff) && ((value & ~0xff) != ~0xff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Branch out of range"));
+ newval = (newval & 0xff00) | ((value & 0x1ff) >> 1);
}
md_number_to_chars (buf, newval, THUMB_SIZE);
break;
- case BFD_RELOC_THUMB_PCREL_BRANCH12: /* unconditional branch */
+ case BFD_RELOC_THUMB_PCREL_BRANCH12: /* Unconditional branch. */
newval = md_chars_to_number (buf, THUMB_SIZE);
{
- addressT diff = (newval & 0x7ff) << 1;
- if (diff & 0x800)
- diff |= ~0x7ff;
-
- value += diff;
- if ((value & ~0x7ff) && ((value & ~0x7ff) != ~0x7ff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Branch out of range"));
- newval = (newval & 0xf800) | ((value & 0xfff) >> 1);
+ addressT diff = (newval & 0x7ff) << 1;
+ if (diff & 0x800)
+ diff |= ~0x7ff;
+
+ value += diff;
+ if ((value & ~0x7ff) && ((value & ~0x7ff) != ~0x7ff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Branch out of range"));
+ newval = (newval & 0xf800) | ((value & 0xfff) >> 1);
}
md_number_to_chars (buf, newval, THUMB_SIZE);
break;
case BFD_RELOC_THUMB_PCREL_BLX:
case BFD_RELOC_THUMB_PCREL_BRANCH23:
{
- offsetT newval2;
- addressT diff;
+ offsetT newval2;
+ addressT diff;
newval = md_chars_to_number (buf, THUMB_SIZE);
- newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
- diff = ((newval & 0x7ff) << 12) | ((newval2 & 0x7ff) << 1);
- if (diff & 0x400000)
+ newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
+ diff = ((newval & 0x7ff) << 12) | ((newval2 & 0x7ff) << 1);
+ if (diff & 0x400000)
diff |= ~0x3fffff;
#ifdef OBJ_ELF
value = fixP->fx_offset;
#endif
- value += diff;
- if ((value & ~0x3fffff) && ((value & ~0x3fffff) != ~0x3fffff))
+ value += diff;
+ if ((value & ~0x3fffff) && ((value & ~0x3fffff) != ~0x3fffff))
as_bad_where (fixP->fx_file, fixP->fx_line,
_("Branch with link out of range"));
- newval = (newval & 0xf800) | ((value & 0x7fffff) >> 12);
- newval2 = (newval2 & 0xf800) | ((value & 0xfff) >> 1);
- md_number_to_chars (buf, newval, THUMB_SIZE);
- md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
+ newval = (newval & 0xf800) | ((value & 0x7fffff) >> 12);
+ newval2 = (newval2 & 0xf800) | ((value & 0xfff) >> 1);
+ if (fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BLX)
+ /* Remove bit zero of the adjusted offset. Bit zero can only be
+ set if the upper insn is at a half-word boundary, since the
+ destination address, an ARM instruction, must always be on a
+ word boundary. The semantics of the BLX (1) instruction, however,
+ are that bit zero in the offset must always be zero, and the
+ corresponding bit one in the target address will be set from bit
+ one of the source address. */
+ newval2 &= ~1;
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
}
break;
md_number_to_chars (buf, value, 1);
#ifdef OBJ_ELF
else if (!target_oabi)
- {
- value = fixP->fx_offset;
- md_number_to_chars (buf, value, 1);
- }
+ {
+ value = fixP->fx_offset;
+ md_number_to_chars (buf, value, 1);
+ }
#endif
break;
md_number_to_chars (buf, value, 2);
#ifdef OBJ_ELF
else if (!target_oabi)
- {
- value = fixP->fx_offset;
- md_number_to_chars (buf, value, 2);
- }
+ {
+ value = fixP->fx_offset;
+ md_number_to_chars (buf, value, 2);
+ }
#endif
break;
#ifdef OBJ_ELF
case BFD_RELOC_ARM_GOT32:
case BFD_RELOC_ARM_GOTOFF:
- md_number_to_chars (buf, 0, 4);
- break;
+ md_number_to_chars (buf, 0, 4);
+ break;
#endif
case BFD_RELOC_RVA:
md_number_to_chars (buf, value, 4);
#ifdef OBJ_ELF
else if (!target_oabi)
- {
- value = fixP->fx_offset;
- md_number_to_chars (buf, value, 4);
- }
+ {
+ value = fixP->fx_offset;
+ md_number_to_chars (buf, value, 4);
+ }
#endif
break;
#ifdef OBJ_ELF
case BFD_RELOC_ARM_PLT32:
- /* It appears the instruction is fully prepared at this point. */
+ /* It appears the instruction is fully prepared at this point. */
break;
#endif
case BFD_RELOC_ARM_GOTPC:
md_number_to_chars (buf, value, 4);
break;
-
+
case BFD_RELOC_ARM_CP_OFF_IMM:
sign = value >= 0;
if (value < -1023 || value > 1023 || (value & 3))
if (value < 0)
value = -value;
newval = md_chars_to_number (buf, INSN_SIZE) & 0xff7fff00;
- newval |= (value >> 2) | (sign ? INDEX_UP : 0);
- md_number_to_chars (buf, newval , INSN_SIZE);
+ newval |= (value >> 2) | (sign ? INDEX_UP : 0);
+ md_number_to_chars (buf, newval, INSN_SIZE);
break;
case BFD_RELOC_ARM_THUMB_OFFSET:
newval = md_chars_to_number (buf, THUMB_SIZE);
- /* Exactly what ranges, and where the offset is inserted depends on
- the type of instruction, we can establish this from the top 4 bits */
+ /* Exactly what ranges, and where the offset is inserted depends
+ on the type of instruction, we can establish this from the
+ top 4 bits. */
switch (newval >> 12)
{
- case 4: /* PC load */
+ case 4: /* PC load. */
/* Thumb PC loads are somewhat odd, bit 1 of the PC is
forced to zero for these loads, so we will need to round
up the offset if the instruction address is not word
if ((fixP->fx_frag->fr_address + fixP->fx_where + value) & 3)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("Invalid offset, target not word aligned (0x%08X)"),
- (unsigned int)(fixP->fx_frag->fr_address + fixP->fx_where + value));
+ (unsigned int) (fixP->fx_frag->fr_address
+ + fixP->fx_where + value));
if ((value + 2) & ~0x3fe)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid offset, value too big (0x%08X)"), value);
+ _("Invalid offset, value too big (0x%08lX)"), value);
- /* Round up, since pc will be rounded down. */
+ /* Round up, since pc will be rounded down. */
newval |= (value + 2) >> 2;
break;
- case 9: /* SP load/store */
+ case 9: /* SP load/store. */
if (value & ~0x3fc)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid offset, value too big (0x%08X)"), value);
+ _("Invalid offset, value too big (0x%08lX)"), value);
newval |= value >> 2;
break;
- case 6: /* Word load/store */
+ case 6: /* Word load/store. */
if (value & ~0x7c)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid offset, value too big (0x%08X)"), value);
- newval |= value << 4; /* 6 - 2 */
+ _("Invalid offset, value too big (0x%08lX)"), value);
+ newval |= value << 4; /* 6 - 2. */
break;
- case 7: /* Byte load/store */
+ case 7: /* Byte load/store. */
if (value & ~0x1f)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid offset, value too big (0x%08X)"), value);
+ _("Invalid offset, value too big (0x%08lX)"), value);
newval |= value << 6;
break;
- case 8: /* Halfword load/store */
+ case 8: /* Halfword load/store. */
if (value & ~0x3e)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid offset, value too big (0x%08X)"), value);
- newval |= value << 5; /* 6 - 1 */
+ _("Invalid offset, value too big (0x%08lX)"), value);
+ newval |= value << 5; /* 6 - 1. */
break;
default:
case BFD_RELOC_ARM_THUMB_ADD:
/* This is a complicated relocation, since we use it for all of
the following immediate relocations:
- 3bit ADD/SUB
- 8bit ADD/SUB
- 9bit ADD/SUB SP word-aligned
- 10bit ADD PC/SP word-aligned
+
+ 3bit ADD/SUB
+ 8bit ADD/SUB
+ 9bit ADD/SUB SP word-aligned
+ 10bit ADD PC/SP word-aligned
The type of instruction being processed is encoded in the
instruction field:
- 0x8000 SUB
- 0x00F0 Rd
- 0x000F Rs
+
+ 0x8000 SUB
+ 0x00F0 Rd
+ 0x000F Rs
*/
newval = md_chars_to_number (buf, THUMB_SIZE);
{
- int rd = (newval >> 4) & 0xf;
- int rs = newval & 0xf;
- int subtract = newval & 0x8000;
-
- if (rd == REG_SP)
- {
- if (value & ~0x1fc)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid immediate for stack address calculation"));
- newval = subtract ? T_OPCODE_SUB_ST : T_OPCODE_ADD_ST;
- newval |= value >> 2;
- }
- else if (rs == REG_PC || rs == REG_SP)
- {
- if (subtract ||
- value & ~0x3fc)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid immediate for address calculation (value = 0x%08lX)"),
+ int rd = (newval >> 4) & 0xf;
+ int rs = newval & 0xf;
+ int subtract = newval & 0x8000;
+
+ if (rd == REG_SP)
+ {
+ if (value & ~0x1fc)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Invalid immediate for stack address calculation"));
+ newval = subtract ? T_OPCODE_SUB_ST : T_OPCODE_ADD_ST;
+ newval |= value >> 2;
+ }
+ else if (rs == REG_PC || rs == REG_SP)
+ {
+ if (subtract ||
+ value & ~0x3fc)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Invalid immediate for address calculation (value = 0x%08lX)"),
(unsigned long) value);
- newval = (rs == REG_PC ? T_OPCODE_ADD_PC : T_OPCODE_ADD_SP);
- newval |= rd << 8;
- newval |= value >> 2;
- }
- else if (rs == rd)
- {
- if (value & ~0xff)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid 8bit immediate"));
- newval = subtract ? T_OPCODE_SUB_I8 : T_OPCODE_ADD_I8;
- newval |= (rd << 8) | value;
- }
- else
- {
- if (value & ~0x7)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid 3bit immediate"));
- newval = subtract ? T_OPCODE_SUB_I3 : T_OPCODE_ADD_I3;
- newval |= rd | (rs << 3) | (value << 6);
- }
+ newval = (rs == REG_PC ? T_OPCODE_ADD_PC : T_OPCODE_ADD_SP);
+ newval |= rd << 8;
+ newval |= value >> 2;
+ }
+ else if (rs == rd)
+ {
+ if (value & ~0xff)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Invalid 8bit immediate"));
+ newval = subtract ? T_OPCODE_SUB_I8 : T_OPCODE_ADD_I8;
+ newval |= (rd << 8) | value;
+ }
+ else
+ {
+ if (value & ~0x7)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Invalid 3bit immediate"));
+ newval = subtract ? T_OPCODE_SUB_I3 : T_OPCODE_ADD_I3;
+ newval |= rd | (rs << 3) | (value << 6);
+ }
}
- md_number_to_chars (buf, newval , THUMB_SIZE);
+ md_number_to_chars (buf, newval, THUMB_SIZE);
break;
case BFD_RELOC_ARM_THUMB_IMM:
newval = md_chars_to_number (buf, THUMB_SIZE);
switch (newval >> 11)
- {
- case 0x04: /* 8bit immediate MOV */
- case 0x05: /* 8bit immediate CMP */
- if (value < 0 || value > 255)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("Invalid immediate: %ld is too large"),
+ {
+ case 0x04: /* 8bit immediate MOV. */
+ case 0x05: /* 8bit immediate CMP. */
+ if (value < 0 || value > 255)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("Invalid immediate: %ld is too large"),
(long) value);
- newval |= value;
- break;
+ newval |= value;
+ break;
- default:
- abort ();
- }
- md_number_to_chars (buf, newval , THUMB_SIZE);
+ default:
+ abort ();
+ }
+ md_number_to_chars (buf, newval, THUMB_SIZE);
break;
case BFD_RELOC_ARM_THUMB_SHIFT:
- /* 5bit shift value (0..31) */
+ /* 5bit shift value (0..31). */
if (value < 0 || value > 31)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("Illegal Thumb shift value: %ld"), (long) value);
newval = md_chars_to_number (buf, THUMB_SIZE) & 0xf03f;
newval |= value << 6;
- md_number_to_chars (buf, newval , THUMB_SIZE);
+ md_number_to_chars (buf, newval, THUMB_SIZE);
break;
case BFD_RELOC_VTABLE_INHERIT:
/* Translate internal representation of relocation info to BFD target
format. */
+
arelent *
tc_gen_reloc (section, fixp)
asection * section ATTRIBUTE_UNUSED;
case BFD_RELOC_ARM_PCREL_BRANCH:
case BFD_RELOC_ARM_PCREL_BLX:
- case BFD_RELOC_RVA:
+ case BFD_RELOC_RVA:
case BFD_RELOC_THUMB_PCREL_BRANCH9:
case BFD_RELOC_THUMB_PCREL_BRANCH12:
case BFD_RELOC_THUMB_PCREL_BRANCH23:
case BFD_RELOC_ARM_LITERAL:
case BFD_RELOC_ARM_HWLITERAL:
/* If this is called then the a literal has been referenced across
- a section boundary - possibly due to an implicit dump */
+ a section boundary - possibly due to an implicit dump. */
as_bad_where (fixp->fx_file, fixp->fx_line,
_("Literal referenced across section boundary (Implicit dump?)"));
return NULL;
case BFD_RELOC_ARM_GOT32:
case BFD_RELOC_ARM_GOTOFF:
case BFD_RELOC_ARM_PLT32:
- code = fixp->fx_r_type;
- break;
+ code = fixp->fx_r_type;
+ break;
#endif
case BFD_RELOC_ARM_IMMEDIATE:
case BFD_RELOC_ARM_ADRL_IMMEDIATE:
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("ADRL used for a symbol not defined in the same file"),
- fixp->fx_r_type);
+ _("ADRL used for a symbol not defined in the same file"));
return NULL;
case BFD_RELOC_ARM_OFFSET_IMM:
default:
{
char * type;
+
switch (fixp->fx_r_type)
{
case BFD_RELOC_ARM_IMMEDIATE: type = "IMMEDIATE"; break;
default: type = _("<unknown>"); break;
}
as_bad_where (fixp->fx_file, fixp->fx_line,
- _("Can not represent %s relocation in this object file format (%d)"),
- type, fixp->fx_pcrel);
+ _("Cannot represent %s relocation in this object file format"),
+ type);
return NULL;
}
}
#ifdef OBJ_ELF
- if (code == BFD_RELOC_32_PCREL
- && GOT_symbol
- && fixp->fx_addsy == GOT_symbol)
- {
- code = BFD_RELOC_ARM_GOTPC;
- reloc->addend = fixp->fx_offset = reloc->address;
- }
+ if (code == BFD_RELOC_32_PCREL
+ && GOT_symbol
+ && fixp->fx_addsy == GOT_symbol)
+ {
+ code = BFD_RELOC_ARM_GOTPC;
+ reloc->addend = fixp->fx_offset = reloc->address;
+ }
#endif
-
+
reloc->howto = bfd_reloc_type_lookup (stdoutput, code);
if (reloc->howto == NULL)
return NULL;
}
- /* HACK: Since arm ELF uses Rel instead of Rela, encode the
- vtable entry to be used in the relocation's section offset. */
- if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- reloc->address = fixp->fx_offset;
+ /* HACK: Since arm ELF uses Rel instead of Rela, encode the
+ vtable entry to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ reloc->address = fixp->fx_offset;
return reloc;
}
output_inst PARAMS ((void))
{
char * to = NULL;
-
+
if (inst.error)
{
as_bad (inst.error);
}
to = frag_more (inst.size);
-
+
if (thumb_mode && (inst.size > THUMB_SIZE))
{
assert (inst.size == (2 * THUMB_SIZE));
inst.size, & inst.reloc.exp, inst.reloc.pc_rel,
inst.reloc.type);
- return;
+#ifdef OBJ_ELF
+ dwarf2_emit_insn (inst.size);
+#endif
}
void
char * start;
/* Align the instruction.
- This may not be the right thing to do but ... */
- /* arm_align (2, 0); */
- listing_prev_line (); /* Defined in listing.h */
+ This may not be the right thing to do but ... */
+#if 0
+ arm_align (2, 0);
+#endif
+ listing_prev_line (); /* Defined in listing.h. */
/* Align the previous label if needed. */
if (last_label_seen != NULL)
inst.reloc.type = BFD_RELOC_NONE;
skip_whitespace (str);
-
+
/* Scan up to the end of the op-code, which must end in white space or
end of string. */
for (start = p = str; *p != '\0'; p++)
if (*p == ' ')
break;
-
+
if (p == str)
{
as_bad (_("No operator -- statement `%s'\n"), str);
*p = '\0';
opcode = (CONST struct thumb_opcode *) hash_find (arm_tops_hsh, str);
*p = c;
-
+
if (opcode)
{
/* Check that this instruction is supported for this CPU. */
if (thumb_mode == 1 && (opcode->variants & cpu_variant) == 0)
- {
- as_bad (_("selected processor does not support this opcode"));
- return;
- }
+ {
+ as_bad (_("selected processor does not support this opcode"));
+ return;
+ }
inst.instruction = opcode->value;
inst.size = opcode->size;
- (*opcode->parms)(p);
+ (*opcode->parms) (p);
output_inst ();
return;
}
unsigned long cond_code;
inst.size = INSN_SIZE;
- /* p now points to the end of the opcode, probably white space, but we
+ /* P now points to the end of the opcode, probably white space, but we
have to break the opcode up in case it contains condionals and flags;
keep trying with progressively smaller basic instructions until one
matches, or we run out of opcode. */
opcode = (CONST struct asm_opcode *) hash_find (arm_ops_hsh, str);
*q = c;
-
+
if (opcode && opcode->template)
{
unsigned long flag_bits = 0;
{
if (opcode->comp_suffix)
{
- if (*opcode->comp_suffix != '\0')
- as_bad (_("Opcode `%s' must have suffix from list: <%s>"),
- str, opcode->comp_suffix);
- else
- /* Not a conditional instruction. */
- (*opcode->parms)(q, 0);
+ if (*opcode->comp_suffix != '\0')
+ as_bad (_("Opcode `%s' must have suffix from list: <%s>"),
+ str, opcode->comp_suffix);
+ else
+ /* Not a conditional instruction. */
+ (*opcode->parms) (q, 0);
}
else
{
- /* A conditional instruction with default condition. */
+ /* A conditional instruction with default condition. */
inst.instruction |= COND_ALWAYS;
- (*opcode->parms)(q, 0);
+ (*opcode->parms) (q, 0);
}
output_inst ();
return;
}
- /* Not just a simple opcode. Check if extra is a conditional. */
+ /* Not just a simple opcode. Check if extra is a
+ conditional. */
r = q;
if (p - r >= 2)
{
else
cond_code = COND_ALWAYS;
- /* Apply the conditional, or complain it's not allowed. */
+ /* Apply the conditional, or complain it's not allowed. */
if (opcode->comp_suffix && *opcode->comp_suffix == '\0')
{
- /* Instruction isn't conditional */
- if (cond_code != COND_ALWAYS)
- {
- as_bad (_("Opcode `%s' is unconditional\n"), str);
- return;
- }
+ /* Instruction isn't conditional. */
+ if (cond_code != COND_ALWAYS)
+ {
+ as_bad (_("Opcode `%s' is unconditional\n"), str);
+ return;
+ }
}
else
- /* Instruction is conditional: set the condition into it. */
- inst.instruction |= cond_code;
+ /* Instruction is conditional: set the condition into it. */
+ inst.instruction |= cond_code;
-
- /* If there is a compulsory suffix, it should come here, before
- any optional flags. */
+ /* If there is a compulsory suffix, it should come here
+ before any optional flags. */
if (opcode->comp_suffix && *opcode->comp_suffix != '\0')
{
CONST char *s = opcode->comp_suffix;
if (*s == '\0')
{
- as_bad (_("Opcode `%s' must have suffix from <%s>\n"), str,
- opcode->comp_suffix);
+ as_bad (_("Opcode `%s' must have suffix from <%s>\n"),
+ str, opcode->comp_suffix);
return;
}
}
/* It wasn't an instruction, but it might be a register alias of the form
- alias .req reg */
+ alias .req reg. */
q = p;
skip_whitespace (q);
c = *p;
*p = '\0';
-
+
if (*q && !strncmp (q, ".req ", 4))
{
int reg;
- char * copy_of_str = str;
+ char * copy_of_str;
char * r;
-
+
+#ifdef IGNORE_OPCODE_CASE
+ str = original_case_string;
+#endif
+ copy_of_str = str;
+
q += 4;
skip_whitespace (q);
for (r = q; *r != '\0'; r++)
if (*r == ' ')
break;
-
+
if (r != q)
{
int regnum;
*r = d;
reg = arm_reg_parse (& str);
-
+
if (reg == FAIL)
{
if (regnum != FAIL)
{
if (reg != regnum)
as_warn (_("ignoring redefinition of register alias '%s'"),
- copy_of_str );
-
+ copy_of_str);
+
/* Do not warn about redefinitions to the same alias. */
}
else
}
else
as_warn (_("ignoring incomplete .req pseuso op"));
-
+
*p = c;
return;
}
as_bad (_("bad instruction `%s'"), start);
}
-/*
- * md_parse_option
- * Invocation line includes a switch not recognized by the base assembler.
- * See if it's a processor-specific option. These are:
- * Cpu variants, the arm part is optional:
- * -m[arm]1 Currently not supported.
- * -m[arm]2, -m[arm]250 Arm 2 and Arm 250 processor
- * -m[arm]3 Arm 3 processor
- * -m[arm]6[xx], Arm 6 processors
- * -m[arm]7[xx][t][[d]m] Arm 7 processors
- * -m[arm]8[10] Arm 8 processors
- * -m[arm]9[20][tdmi] Arm 9 processors
- * -mstrongarm[110[0]] StrongARM processors
- * -m[arm]v[2345[t]] Arm architectures
- * -mall All (except the ARM1)
- * FP variants:
- * -mfpa10, -mfpa11 FPA10 and 11 co-processor instructions
- * -mfpe-old (No float load/store multiples)
- * -mno-fpu Disable all floating point instructions
- * Run-time endian selection:
- * -EB big endian cpu
- * -EL little endian cpu
- * ARM Procedure Calling Standard:
- * -mapcs-32 32 bit APCS
- * -mapcs-26 26 bit APCS
- * -mapcs-float Pass floats in float regs
- * -mapcs-reentrant Position independent code
- * -mthumb-interwork Code supports Arm/Thumb interworking
- * -moabi Old ELF ABI
- */
+/* md_parse_option
+ Invocation line includes a switch not recognized by the base assembler.
+ See if it's a processor-specific option. These are:
+ Cpu variants, the arm part is optional:
+ -m[arm]1 Currently not supported.
+ -m[arm]2, -m[arm]250 Arm 2 and Arm 250 processor
+ -m[arm]3 Arm 3 processor
+ -m[arm]6[xx], Arm 6 processors
+ -m[arm]7[xx][t][[d]m] Arm 7 processors
+ -m[arm]8[10] Arm 8 processors
+ -m[arm]9[20][tdmi] Arm 9 processors
+ -mstrongarm[110[0]] StrongARM processors
+ -mxscale XScale processors
+ -m[arm]v[2345[t[e]]] Arm architectures
+ -mall All (except the ARM1)
+ FP variants:
+ -mfpa10, -mfpa11 FPA10 and 11 co-processor instructions
+ -mfpe-old (No float load/store multiples)
+ -mno-fpu Disable all floating point instructions
+ Run-time endian selection:
+ -EB big endian cpu
+ -EL little endian cpu
+ ARM Procedure Calling Standard:
+ -mapcs-32 32 bit APCS
+ -mapcs-26 26 bit APCS
+ -mapcs-float Pass floats in float regs
+ -mapcs-reentrant Position independent code
+ -mthumb-interwork Code supports Arm/Thumb interworking
+ -matpcs ARM/Thumb Procedure Call Standard
+ -moabi Old ELF ABI */
CONST char * md_shortopts = "m:k";
+
struct option md_longopts[] =
{
#ifdef ARM_BI_ENDIAN
#endif
{NULL, no_argument, NULL, 0}
};
+
size_t md_longopts_size = sizeof (md_longopts);
int
break;
#ifdef OBJ_ELF
- case 'o':
- if (streq (str, "oabi"))
- target_oabi = true;
- break;
+ case 'o':
+ if (streq (str, "oabi"))
+ target_oabi = true;
+ break;
#endif
-
- case 't':
- /* Limit assembler to generating only Thumb instructions: */
- if (streq (str, "thumb"))
- {
- cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_THUMB;
- cpu_variant = (cpu_variant & ~FPU_ALL) | FPU_NONE;
- thumb_mode = 1;
- }
- else if (streq (str, "thumb-interwork"))
- {
- if ((cpu_variant & ARM_THUMB) == 0)
+
+ case 't':
+ /* Limit assembler to generating only Thumb instructions: */
+ if (streq (str, "thumb"))
+ {
+ cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_EXT_THUMB;
+ cpu_variant = (cpu_variant & ~FPU_ALL) | FPU_NONE;
+ thumb_mode = 1;
+ }
+ else if (streq (str, "thumb-interwork"))
+ {
+ if ((cpu_variant & ARM_EXT_THUMB) == 0)
cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_ARCH_V4T;
#if defined OBJ_COFF || defined OBJ_ELF
- support_interwork = true;
+ support_interwork = true;
#endif
- }
- else
+ }
+ else
goto bad;
- break;
+ break;
default:
if (streq (str, "all"))
to us, so we must parse them here. */
str += 5;
-
+
if (streq (str, "32"))
{
uses_apcs_26 = false;
{
/* Reentrant code has been generated. This does affect
linking, since there is no point in linking reentrant/
- position independent code with absolute position code. */
+ position independent code with absolute position code. */
pic_code = true;
return 1;
}
-
+
as_bad (_("Unrecognised APCS switch -m%s"), arg);
return 0;
- }
+ }
+
+ if (! strcmp (str, "atpcs"))
+ {
+ atpcs = true;
+ return 1;
+ }
#endif
- /* Strip off optional "arm" */
+ /* Strip off optional "arm". */
if (! strncmp (str, "arm", 3))
str += 3;
break;
case '7':
- switch (strtol (str, & str, 10)) /* Eat the processor name */
+ /* Eat the processor name. */
+ switch (strtol (str, & str, 10))
{
case 7:
case 70:
default:
goto bad;
}
- cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_7;
- for (; *str; str++)
- {
- switch (* str)
- {
- case 't':
- cpu_variant |= (ARM_THUMB | ARM_ARCH_V4);
- break;
-
- case 'm':
- cpu_variant |= ARM_LONGMUL;
- break;
-
- case 'f': /* fe => fp enabled cpu. */
- if (str[1] == 'e')
- ++ str;
- else
+ cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_7;
+ for (; *str; str++)
+ {
+ switch (*str)
+ {
+ case 't':
+ cpu_variant |= ARM_ARCH_V4T;
+ break;
+
+ case 'm':
+ cpu_variant |= ARM_EXT_LONGMUL;
+ break;
+
+ case 'f': /* fe => fp enabled cpu. */
+ if (str[1] == 'e')
+ ++ str;
+ else
+ goto bad;
+
+ case 'c': /* Left over from 710c processor name. */
+ case 'd': /* Debug. */
+ case 'i': /* Embedded ICE. */
+ /* Included for completeness in ARM processor naming. */
+ break;
+
+ default:
goto bad;
-
- case 'c': /* Left over from 710c processor name. */
- case 'd': /* Debug */
- case 'i': /* Embedded ICE */
- /* Included for completeness in ARM processor naming. */
- break;
-
- default:
- goto bad;
- }
- }
+ }
+ }
break;
case '8':
if (streq (str, "8") || streq (str, "810"))
cpu_variant = (cpu_variant & ~ARM_ANY)
- | ARM_8 | ARM_ARCH_V4 | ARM_LONGMUL;
+ | ARM_8 | ARM_ARCH_V4;
else
goto bad;
break;
-
+
case '9':
if (streq (str, "9"))
cpu_variant = (cpu_variant & ~ARM_ANY)
- | ARM_9 | ARM_ARCH_V4 | ARM_LONGMUL | ARM_THUMB;
+ | ARM_9 | ARM_ARCH_V4T;
else if (streq (str, "920"))
cpu_variant = (cpu_variant & ~ARM_ANY)
- | ARM_9 | ARM_ARCH_V4 | ARM_LONGMUL;
+ | ARM_9 | ARM_ARCH_V4;
else if (streq (str, "920t"))
cpu_variant = (cpu_variant & ~ARM_ANY)
- | ARM_9 | ARM_ARCH_V4 | ARM_LONGMUL | ARM_THUMB;
+ | ARM_9 | ARM_ARCH_V4T;
else if (streq (str, "9tdmi"))
cpu_variant = (cpu_variant & ~ARM_ANY)
- | ARM_9 | ARM_ARCH_V4 | ARM_LONGMUL | ARM_THUMB;
+ | ARM_9 | ARM_ARCH_V4T;
else
goto bad;
break;
-
case 's':
if (streq (str, "strongarm")
|| streq (str, "strongarm110")
|| streq (str, "strongarm1100"))
cpu_variant = (cpu_variant & ~ARM_ANY)
- | ARM_8 | ARM_ARCH_V4 | ARM_LONGMUL;
+ | ARM_8 | ARM_ARCH_V4;
else
goto bad;
break;
-
+
+ case 'x':
+ if (streq (str, "xscale"))
+ cpu_variant = ARM_9 | ARM_ARCH_XSCALE;
+ else
+ goto bad;
+ break;
+
case 'v':
- /* Select variant based on architecture rather than processor. */
+ /* Select variant based on architecture rather than
+ processor. */
switch (*++str)
{
case '2':
break;
}
break;
-
+
case '3':
- cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_7;
-
+ cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_7;
+
switch (*++str)
{
- case 'm': cpu_variant |= ARM_LONGMUL; break;
+ case 'm': cpu_variant |= ARM_EXT_LONGMUL; break;
case 0: break;
default:
as_bad (_("Invalid architecture variant -m%s"), arg);
break;
}
break;
-
+
case '4':
- cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_ARCH_V4;
-
+ cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_7 | ARM_ARCH_V4;
+
switch (*++str)
{
- case 't': cpu_variant |= ARM_THUMB; break;
+ case 't': cpu_variant |= ARM_EXT_THUMB; break;
case 0: break;
default:
as_bad (_("Invalid architecture variant -m%s"), arg);
break;
case '5':
- cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_ARCH_V5;
+ cpu_variant = (cpu_variant & ~ARM_ANY) | ARM_9 | ARM_ARCH_V5;
switch (*++str)
{
- case 't': cpu_variant |= ARM_THUMB; break;
+ case 't': cpu_variant |= ARM_EXT_THUMB; break;
+ case 'e': cpu_variant |= ARM_EXT_V5E; break;
case 0: break;
default:
as_bad (_("Invalid architecture variant -m%s"), arg);
break;
}
break;
-
+
default:
as_bad (_("Invalid architecture variant -m%s"), arg);
break;
}
break;
-
+
default:
bad:
as_bad (_("Invalid processor variant -m%s"), arg);
pic_code = 1;
break;
#endif
-
+
default:
return 0;
}
- return 1;
+ return 1;
}
void
#if defined OBJ_COFF || defined OBJ_ELF
fprintf (fp, _("\
-mapcs-32, -mapcs-26 specify which ARM Procedure Calling Standard to use\n\
+ -matpcs use ARM/Thumb Procedure Calling Standard\n\
-mapcs-float floating point args are passed in FP regs\n\
-mapcs-reentrant the code is position independent/reentrant\n"));
- #endif
+#endif
#ifdef OBJ_ELF
fprintf (fp, _("\
-moabi support the old ELF ABI\n"));
int pc_rel;
int reloc;
{
- fixS * new_fix;
- arm_fix_data * arm_data;
+ fixS * new_fix;
+ arm_fix_data * arm_data;
switch (exp->X_op)
{
break;
}
- /* Mark whether the fix is to a THUMB instruction, or an ARM instruction */
+ /* Mark whether the fix is to a THUMB instruction, or an ARM
+ instruction. */
arm_data = (arm_fix_data *) obstack_alloc (& notes, sizeof (arm_fix_data));
new_fix->tc_fix_data = (PTR) arm_data;
arm_data->thumb_mode = thumb_mode;
return;
}
-
/* This fix_new is called by cons via TC_CONS_FIX_NEW. */
+
void
cons_fix_new_arm (frag, where, size, exp)
fragS * frag;
{
bfd_reloc_code_real_type type;
int pcrel = 0;
-
- /* Pick a reloc ...
- *
- * @@ Should look at CPU word size.
- */
- switch (size)
+
+ /* Pick a reloc.
+ FIXME: @@ Should look at CPU word size. */
+ switch (size)
{
+ case 1:
+ type = BFD_RELOC_8;
+ break;
case 2:
type = BFD_RELOC_16;
break;
type = BFD_RELOC_64;
break;
}
-
+
fix_new_exp (frag, where, (int) size, exp, pcrel, type);
}
/* A good place to do this, although this was probably not intended
for this kind of use. We need to dump the literal pool before
references are made to a null symbol pointer. */
+
void
arm_cleanup ()
{
if (current_poolP == NULL)
return;
-
- subseg_set (text_section, 0); /* Put it at the end of text section. */
+
+ /* Put it at the end of text section. */
+ subseg_set (text_section, 0);
s_ltorg (0);
listing_prev_line ();
}
symbolS * sym;
{
last_label_seen = sym;
-
+
ARM_SET_THUMB (sym, thumb_mode);
-
+
#if defined OBJ_COFF || defined OBJ_ELF
ARM_SET_INTERWORK (sym, support_interwork);
#endif
-
- if (label_is_thumb_function_name)
+
+ /* Note - do not allow local symbols (.Lxxx) to be labeled
+ as Thumb functions. This is because these labels, whilst
+ they exist inside Thumb code, are not the entry points for
+ possible ARM->Thumb calls. Also, these labels can be used
+ as part of a computed goto or switch statement. eg gcc
+ can generate code that looks like this:
+
+ ldr r2, [pc, .Laaa]
+ lsl r3, r3, #2
+ ldr r2, [r3, r2]
+ mov pc, r2
+
+ .Lbbb: .word .Lxxx
+ .Lccc: .word .Lyyy
+ ..etc...
+ .Laaa: .word Lbbb
+
+ The first instruction loads the address of the jump table.
+ The second instruction converts a table index into a byte offset.
+ The third instruction gets the jump address out of the table.
+ The fourth instruction performs the jump.
+
+ If the address stored at .Laaa is that of a symbol which has the
+ Thumb_Func bit set, then the linker will arrange for this address
+ to have the bottom bit set, which in turn would mean that the
+ address computation performed by the third instruction would end
+ up with the bottom bit set. Since the ARM is capable of unaligned
+ word loads, the instruction would then load the incorrect address
+ out of the jump table, and chaos would ensue. */
+ if (label_is_thumb_function_name
+ && (S_GET_NAME (sym)[0] != '.' || S_GET_NAME (sym)[1] != 'L')
+ && (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0)
{
/* When the address of a Thumb function is taken the bottom
bit of that address should be set. This will allow
correctly. */
THUMB_SET_FUNC (sym, 1);
-
+
label_is_thumb_function_name = false;
}
}
for (sym = symbol_rootP; sym != NULL; sym = symbol_next (sym))
{
if (ARM_IS_THUMB (sym))
- {
+ {
if (THUMB_IS_FUNC (sym))
{
/* Mark the symbol as a Thumb function. */
if ( S_GET_STORAGE_CLASS (sym) == C_STAT
- || S_GET_STORAGE_CLASS (sym) == C_LABEL) /* This can happen! */
+ || S_GET_STORAGE_CLASS (sym) == C_LABEL) /* This can happen! */
S_SET_STORAGE_CLASS (sym, C_THUMBSTATFUNC);
else if (S_GET_STORAGE_CLASS (sym) == C_EXT)
S_GET_NAME (sym), S_GET_STORAGE_CLASS (sym));
}
else switch (S_GET_STORAGE_CLASS (sym))
- {
- case C_EXT:
- S_SET_STORAGE_CLASS (sym, C_THUMBEXT);
- break;
- case C_STAT:
- S_SET_STORAGE_CLASS (sym, C_THUMBSTAT);
- break;
- case C_LABEL:
- S_SET_STORAGE_CLASS (sym, C_THUMBLABEL);
- break;
- default: /* do nothing */
- break;
- }
- }
+ {
+ case C_EXT:
+ S_SET_STORAGE_CLASS (sym, C_THUMBEXT);
+ break;
+ case C_STAT:
+ S_SET_STORAGE_CLASS (sym, C_THUMBSTAT);
+ break;
+ case C_LABEL:
+ S_SET_STORAGE_CLASS (sym, C_THUMBLABEL);
+ break;
+ default:
+ /* Do nothing. */
+ break;
+ }
+ }
if (ARM_IS_INTERWORK (sym))
coffsymbol (symbol_get_bfdsym (sym))->native->u.syment.n_flags = 0xFF;
}
#endif
#ifdef OBJ_ELF
- symbolS * sym;
- char bind;
+ symbolS * sym;
+ char bind;
for (sym = symbol_rootP; sym != NULL; sym = symbol_next (sym))
{
if (ARM_IS_THUMB (sym))
- {
+ {
elf_symbol_type * elf_sym;
-
+
elf_sym = elf_symbol (symbol_get_bfdsym (sym));
bind = ELF_ST_BIND (elf_sym);
-
+
/* If it's a .thumb_func, declare it as so,
otherwise tag label as .code 16. */
if (THUMB_IS_FUNC (sym))
else
elf_sym->internal_elf_sym.st_info =
ELF_ST_INFO (bind, STT_ARM_16BIT);
- }
- }
+ }
+ }
#endif
}
*input_line_pointer = 0;
return 1;
}
-
+
return 0;
}
the THUMB_FUNC attribute, then we must be calling a function which has
the (interfacearm) attribute. We look for the Thumb entry point to that
function and change the branch to refer to that function instead. */
- if ( fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BRANCH23
+ if (fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BRANCH23
&& fixP->fx_addsy != NULL
&& S_IS_DEFINED (fixP->fx_addsy)
&& ! THUMB_IS_FUNC (fixP->fx_addsy))
return false;
}
+#ifdef OBJ_COFF
+/* This is a little hack to help the gas/arm/adrl.s test. It prevents
+ local labels from being added to the output symbol table when they
+ are used with the ADRL pseudo op. The ADRL relocation should always
+ be resolved before the binbary is emitted, so it is safe to say that
+ it is adjustable. */
+
+boolean
+arm_fix_adjustable (fixP)
+ fixS * fixP;
+{
+ if (fixP->fx_r_type == BFD_RELOC_ARM_ADRL_IMMEDIATE)
+ return 1;
+ return 0;
+}
+#endif
#ifdef OBJ_ELF
/* Relocations against Thumb function names must be left unadjusted,
so that the linker can use this information to correctly set the
than a function) and then later jumping to that address. Such
addresses also ought to have their bottom bit set (assuming that
they reside in Thumb code), but at the moment they will not. */
-
+
boolean
arm_fix_adjustable (fixP)
fixS * fixP;
{
if (fixP->fx_addsy == NULL)
return 1;
-
- /* Prevent all adjustments to global symbols. */
+
+ /* Prevent all adjustments to global symbols. */
if (S_IS_EXTERN (fixP->fx_addsy))
return 0;
-
+
if (S_IS_WEAK (fixP->fx_addsy))
return 0;
if (THUMB_IS_FUNC (fixP->fx_addsy)
&& fixP->fx_subsy == NULL)
return 0;
-
- /* We need the symbol name for the VTABLE entries */
+
+ /* We need the symbol name for the VTABLE entries. */
if ( fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
elf32_arm_target_format ()
{
if (target_big_endian)
- if (target_oabi)
- return "elf32-bigarm-oabi";
- else
- return "elf32-bigarm";
+ {
+ if (target_oabi)
+ return "elf32-bigarm-oabi";
+ else
+ return "elf32-bigarm";
+ }
else
- if (target_oabi)
- return "elf32-littlearm-oabi";
- else
- return "elf32-littlearm";
+ {
+ if (target_oabi)
+ return "elf32-littlearm-oabi";
+ else
+ return "elf32-littlearm";
+ }
}
void
armelf_frob_symbol (symp, puntp)
symbolS * symp;
- int * puntp;
+ int * puntp;
{
elf_frob_symbol (symp, puntp);
-}
+}
int
arm_force_relocation (fixp)
|| fixp->fx_r_type == BFD_RELOC_ARM_PCREL_BRANCH
|| fixp->fx_r_type == BFD_RELOC_ARM_PCREL_BLX
|| fixp->fx_r_type == BFD_RELOC_THUMB_PCREL_BLX
- || fixp->fx_r_type == BFD_RELOC_THUMB_PCREL_BRANCH23)
+ || fixp->fx_r_type == BFD_RELOC_THUMB_PCREL_BRANCH23)
return 1;
-
+
return 0;
}
static bfd_reloc_code_real_type
arm_parse_reloc ()
{
- char id[16];
- char * ip;
+ char id [16];
+ char * ip;
unsigned int i;
static struct
{
}
reloc_map[] =
{
-#define MAP(str,reloc) { str, sizeof (str)-1, reloc }
+#define MAP(str,reloc) { str, sizeof (str) - 1, reloc }
MAP ("(got)", BFD_RELOC_ARM_GOT32),
MAP ("(gotoff)", BFD_RELOC_ARM_GOTOFF),
- /* ScottB: Jan 30, 1998 */
- /* Added support for parsing "var(PLT)" branch instructions */
- /* generated by GCC for PLT relocs */
+ /* ScottB: Jan 30, 1998 - Added support for parsing "var(PLT)"
+ branch instructions generated by GCC for PLT relocs. */
MAP ("(plt)", BFD_RELOC_ARM_PLT32),
{ NULL, 0, BFD_RELOC_UNUSED }
-#undef MAP
+#undef MAP
};
for (i = 0, ip = input_line_pointer;
i < sizeof (id) && (isalnum (*ip) || ispunct (*ip));
i++, ip++)
id[i] = tolower (*ip);
-
+
for (i = 0; reloc_map[i].str; i++)
if (strncmp (id, reloc_map[i].str, reloc_map[i].len) == 0)
break;
-
+
input_line_pointer += reloc_map[i].len;
-
+
return reloc_map[i].reloc;
}
do
{
bfd_reloc_code_real_type reloc;
-
+
expression (& exp);
if (exp.X_op == O_symbol
- && * input_line_pointer == '('
- && (reloc = arm_parse_reloc()) != BFD_RELOC_UNUSED)
- {
- reloc_howto_type * howto = bfd_reloc_type_lookup (stdoutput, reloc);
- int size = bfd_get_reloc_size (howto);
-
- if (size > nbytes)
- as_bad ("%s relocations do not fit in %d bytes",
+ && * input_line_pointer == '('
+ && (reloc = arm_parse_reloc ()) != BFD_RELOC_UNUSED)
+ {
+ reloc_howto_type *howto = bfd_reloc_type_lookup (stdoutput, reloc);
+ int size = bfd_get_reloc_size (howto);
+
+ if (size > nbytes)
+ as_bad ("%s relocations do not fit in %d bytes",
howto->name, nbytes);
- else
- {
- register char * p = frag_more ((int) nbytes);
- int offset = nbytes - size;
-
- fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size,
- & exp, 0, reloc);
- }
- }
+ else
+ {
+ register char *p = frag_more ((int) nbytes);
+ int offset = nbytes - size;
+
+ fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size,
+ &exp, 0, reloc);
+ }
+ }
else
- emit_expr (& exp, (unsigned int) nbytes);
+ emit_expr (&exp, (unsigned int) nbytes);
}
while (*input_line_pointer++ == ',');
- input_line_pointer--; /* Put terminator back into stream. */
+ /* Put terminator back into stream. */
+ input_line_pointer --;
demand_empty_rest_of_line ();
}
#endif /* OBJ_ELF */
+
+/* This is called from HANDLE_ALIGN in write.c. Fill in the contents
+ of an rs_align_code fragment. */
+
+void
+arm_handle_align (fragP)
+ fragS *fragP;
+{
+ static char const arm_noop[4] = { 0x00, 0x00, 0xa0, 0xe1 };
+ static char const thumb_noop[2] = { 0xc0, 0x46 };
+ static char const arm_bigend_noop[4] = { 0xe1, 0xa0, 0x00, 0x00 };
+ static char const thumb_bigend_noop[2] = { 0x46, 0xc0 };
+
+ int bytes, fix, noop_size;
+ char * p;
+ const char * noop;
+
+ if (fragP->fr_type != rs_align_code)
+ return;
+
+ bytes = fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix;
+ p = fragP->fr_literal + fragP->fr_fix;
+ fix = 0;
+
+ if (bytes > MAX_MEM_FOR_RS_ALIGN_CODE)
+ bytes &= MAX_MEM_FOR_RS_ALIGN_CODE;
+
+ if (fragP->tc_frag_data)
+ {
+ if (target_big_endian)
+ noop = thumb_bigend_noop;
+ else
+ noop = thumb_noop;
+ noop_size = sizeof (thumb_noop);
+ }
+ else
+ {
+ if (target_big_endian)
+ noop = arm_bigend_noop;
+ else
+ noop = arm_noop;
+ noop_size = sizeof (arm_noop);
+ }
+
+ if (bytes & (noop_size - 1))
+ {
+ fix = bytes & (noop_size - 1);
+ memset (p, 0, fix);
+ p += fix;
+ bytes -= fix;
+ }
+
+ while (bytes >= noop_size)
+ {
+ memcpy (p, noop, noop_size);
+ p += noop_size;
+ bytes -= noop_size;
+ fix += noop_size;
+ }
+
+ fragP->fr_fix += fix;
+ fragP->fr_var = noop_size;
+}
+
+/* Called from md_do_align. Used to create an alignment
+ frag in a code section. */
+
+void
+arm_frag_align_code (n, max)
+ int n;
+ int max;
+{
+ char * p;
+
+ /* We assume that there will never be a requirment
+ to support alignments greater than 32 bytes. */
+ if (max > MAX_MEM_FOR_RS_ALIGN_CODE)
+ as_fatal (_("alignments greater than 32 bytes not supported in .text sections."));
+
+ p = frag_var (rs_align_code,
+ MAX_MEM_FOR_RS_ALIGN_CODE,
+ 1,
+ (relax_substateT) max,
+ (symbolS *) NULL,
+ (offsetT) n,
+ (char *) NULL);
+ *p = 0;
+
+}
+
+/* Perform target specific initialisation of a frag. */
+
+void
+arm_init_frag (fragP)
+ fragS *fragP;
+{
+ /* Record whether this frag is in an ARM or a THUMB area. */
+ fragP->tc_frag_data = thumb_mode;
+}