+// SPDX-License-Identifier: GPL-2.0+
/*
* Display driver for Allwinner SoCs.
*
* (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be>
* (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl);
writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0);
+ /* Enable PLLs for eventual DDC */
+ writel(SUNXI_HDMI_PAD_CTRL1 | SUNXI_HDMI_PAD_CTRL1_HALVE,
+ &hdmi->pad_ctrl1);
+ writel(SUNXI_HDMI_PLL_CTRL | SUNXI_HDMI_PLL_CTRL_DIV(15),
+ &hdmi->pll_ctrl);
+ writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
+
while (timer_get_us() < tmo) {
if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT)
return 1;
return r;
}
-static int sunxi_hdmi_edid_get_mode(struct ctfb_res_modes *mode)
+static int sunxi_hdmi_edid_get_mode(struct ctfb_res_modes *mode,
+ bool verbose_mode)
{
struct edid1_info edid1;
struct edid_cea861_info cea681[4];
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int i, r, ext_blocks = 0;
- /* SUNXI_HDMI_CTRL_ENABLE & PAD_CTRL0 are already set by hpd_detect */
- writel(SUNXI_HDMI_PAD_CTRL1 | SUNXI_HDMI_PAD_CTRL1_HALVE,
- &hdmi->pad_ctrl1);
- writel(SUNXI_HDMI_PLL_CTRL | SUNXI_HDMI_PLL_CTRL_DIV(15),
- &hdmi->pll_ctrl);
- writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
-
/* Reset i2c controller */
setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE);
writel(SUNXI_HMDI_DDC_CTRL_ENABLE |
if (r == 0) {
r = edid_check_info(&edid1);
if (r) {
- printf("EDID: invalid EDID data\n");
+ if (verbose_mode)
+ printf("EDID: invalid EDID data\n");
r = -EINVAL;
}
}
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE);
}
-static u32 sunxi_rgb2yuv_coef[12] = {
+static const u32 sunxi_rgb2yuv_coef[12] = {
0x00000107, 0x00000204, 0x00000064, 0x00000108,
0x00003f69, 0x00003ed6, 0x000001c1, 0x00000808,
0x000001c1, 0x00003e88, 0x00003fb8, 0x00000808
struct ctfb_res_modes custom;
const char *options;
#ifdef CONFIG_VIDEO_HDMI
- int ret, hpd, hpd_delay, edid;
+ int hpd, hpd_delay, edid;
+ bool hdmi_present;
#endif
int i, overscan_offset, overscan_x, overscan_y;
unsigned int fb_dma_addr;
if (sunxi_display.monitor == sunxi_monitor_dvi ||
sunxi_display.monitor == sunxi_monitor_hdmi) {
/* Always call hdp_detect, as it also enables clocks, etc. */
- ret = sunxi_hdmi_hpd_detect(hpd_delay);
- if (ret) {
+ hdmi_present = (sunxi_hdmi_hpd_detect(hpd_delay) == 1);
+ if (hdmi_present && edid) {
printf("HDMI connected: ");
- if (edid && sunxi_hdmi_edid_get_mode(&custom) == 0)
+ if (sunxi_hdmi_edid_get_mode(&custom, true) == 0)
mode = &custom;
- } else if (hpd) {
+ else
+ hdmi_present = false;
+ }
+ /* Fall back to EDID in case HPD failed */
+ if (edid && !hdmi_present) {
+ if (sunxi_hdmi_edid_get_mode(&custom, false) == 0) {
+ mode = &custom;
+ hdmi_present = true;
+ }
+ }
+ /* Shut down when display was not found */
+ if ((hpd || edid) && !hdmi_present) {
sunxi_hdmi_shutdown();
sunxi_display.monitor = sunxi_get_default_mon(false);
} /* else continue with hdmi/dvi without a cable connected */