+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for AT91/AT32 LCD Controller
*
* Copyright (C) 2007 Atmel Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <atmel_lcd.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <log.h>
+#include <part.h>
+#include <video.h>
+#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
+#include <bmp_layout.h>
#include <atmel_lcdc.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DM_VIDEO
+enum {
+ /* Maximum LCD size we support */
+ LCD_MAX_WIDTH = 1366,
+ LCD_MAX_HEIGHT = 768,
+ LCD_MAX_LOG2_BPP = VIDEO_BPP16,
+};
+#endif
+
+struct atmel_fb_priv {
+ struct display_timing timing;
+};
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_GUARD_TIME 1
#endif
-#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
+#if defined(CONFIG_AT91SAM9263)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
#define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg))
+#ifndef CONFIG_DM_VIDEO
+ushort *configuration_get_cmap(void)
+{
+ return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
+}
+
+#if defined(CONFIG_BMP_16BPP) && defined(CONFIG_ATMEL_LCD_BGR555)
+void fb_put_word(uchar **fb, uchar **from)
+{
+ *(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03);
+ *(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2);
+ *from += 2;
+}
+#endif
+
+#ifdef CONFIG_LCD_LOGO
+#include <bmp_logo.h>
+void lcd_logo_set_cmap(void)
+{
+ int i;
+ uint lut_entry;
+ ushort colreg;
+ uint *cmap = (uint *)configuration_get_cmap();
+
+ for (i = 0; i < BMP_LOGO_COLORS; ++i) {
+ colreg = bmp_logo_palette[i];
+#ifdef CONFIG_ATMEL_LCD_BGR555
+ lut_entry = ((colreg & 0x000F) << 11) |
+ ((colreg & 0x00F0) << 2) |
+ ((colreg & 0x0F00) >> 7);
+#else
+ lut_entry = ((colreg & 0x000F) << 1) |
+ ((colreg & 0x00F0) << 3) |
+ ((colreg & 0x0F00) << 4);
+#endif
+ *(cmap + BMP_LOGO_OFFSET) = lut_entry;
+ cmap++;
+ }
+}
+#endif
+
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
{
#if defined(CONFIG_ATMEL_LCD_BGR555)
#endif
}
-void lcd_ctrl_init(void *lcdbase)
+void lcd_set_cmap(struct bmp_image *bmp, unsigned colors)
+{
+ int i;
+
+ for (i = 0; i < colors; ++i) {
+ struct bmp_color_table_entry cte = bmp->color_table[i];
+ lcd_setcolreg(i, cte.red, cte.green, cte.blue);
+ }
+}
+#endif
+
+static void atmel_fb_init(ulong addr, struct display_timing *timing, int bpix,
+ bool tft, bool cont_pol_low, ulong lcdbase)
{
unsigned long value;
+ void *reg = (void *)addr;
/* Turn off the LCD controller and the DMA controller */
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
+ lcdc_writel(reg, ATMEL_LCDC_PWRCON,
ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET);
/* Wait for the LCDC core to become idle */
- while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ while (lcdc_readl(reg, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
udelay(10);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
+ lcdc_writel(reg, ATMEL_LCDC_DMACON, 0);
/* Reset LCDC DMA */
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
+ lcdc_writel(reg, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
/* ...set frame size and burst length = 8 words (?) */
- value = (panel_info.vl_col * panel_info.vl_row *
- NBITS(panel_info.vl_bpix)) / 32;
+ value = (timing->hactive.typ * timing->vactive.typ *
+ (1 << bpix)) / 32;
value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
+ lcdc_writel(reg, ATMEL_LCDC_DMAFRMCFG, value);
/* Set pixel clock */
- value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
- if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
+ value = get_lcdc_clk_rate(0) / timing->pixelclock.typ;
+ if (get_lcdc_clk_rate(0) % timing->pixelclock.typ)
value++;
value = (value / 2) - 1;
if (!value) {
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+ lcdc_writel(reg, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
} else
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
+ lcdc_writel(reg, ATMEL_LCDC_LCDCON1,
value << ATMEL_LCDC_CLKVAL_OFFSET);
/* Initialize control register 2 */
-#ifdef CONFIG_AVR32
- value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
-#else
value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
-#endif
- if (panel_info.vl_tft)
+ if (tft)
value |= ATMEL_LCDC_DISTYPE_TFT;
- value |= panel_info.vl_sync;
- value |= (panel_info.vl_bpix << 5);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
+ if (!(timing->flags & DISPLAY_FLAGS_HSYNC_HIGH))
+ value |= ATMEL_LCDC_INVLINE_INVERTED;
+ if (!(timing->flags & DISPLAY_FLAGS_VSYNC_HIGH))
+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
+ value |= bpix << 5;
+ lcdc_writel(reg, ATMEL_LCDC_LCDCON2, value);
/* Vertical timing */
- value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
- value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
- value |= panel_info.vl_lower_margin;
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
+ value = (timing->vsync_len.typ - 1) << ATMEL_LCDC_VPW_OFFSET;
+ value |= timing->vback_porch.typ << ATMEL_LCDC_VBP_OFFSET;
+ value |= timing->vfront_porch.typ;
+ /* Magic! (Datasheet says "Bit 31 must be written to 1") */
+ value |= 1U << 31;
+ lcdc_writel(reg, ATMEL_LCDC_TIM1, value);
/* Horizontal timing */
- value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
- value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
- value |= (panel_info.vl_left_margin - 1);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
+ value = (timing->hfront_porch.typ - 1) << ATMEL_LCDC_HFP_OFFSET;
+ value |= (timing->hsync_len.typ - 1) << ATMEL_LCDC_HPW_OFFSET;
+ value |= (timing->hback_porch.typ - 1);
+ lcdc_writel(reg, ATMEL_LCDC_TIM2, value);
/* Display size */
- value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
- value |= panel_info.vl_row - 1;
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
+ value = (timing->hactive.typ - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ value |= timing->vactive.typ - 1;
+ lcdc_writel(reg, ATMEL_LCDC_LCDFRMCFG, value);
/* FIFO Threshold: Use formula from data sheet */
value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
+ lcdc_writel(reg, ATMEL_LCDC_FIFO, value);
/* Toggle LCD_MODE every frame */
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
+ lcdc_writel(reg, ATMEL_LCDC_MVAL, 0);
/* Disable all interrupts */
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
+ lcdc_writel(reg, ATMEL_LCDC_IDR, ~0UL);
/* Set contrast */
value = ATMEL_LCDC_PS_DIV8 |
ATMEL_LCDC_ENA_PWMENABLE;
- if (!panel_info.vl_cont_pol_low)
+ if (!cont_pol_low)
value |= ATMEL_LCDC_POL_POSITIVE;
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+ lcdc_writel(reg, ATMEL_LCDC_CONTRAST_CTR, value);
+ lcdc_writel(reg, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
/* Set framebuffer DMA base address and pixel offset */
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
+ lcdc_writel(reg, ATMEL_LCDC_DMABADDR1, lcdbase);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
- lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
+ lcdc_writel(reg, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
+ lcdc_writel(reg, ATMEL_LCDC_PWRCON,
(ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
}
+#ifndef CONFIG_DM_VIDEO
+void lcd_ctrl_init(void *lcdbase)
+{
+ struct display_timing timing;
+
+ timing.flags = 0;
+ if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED))
+ timing.flags |= DISPLAY_FLAGS_HSYNC_HIGH;
+ if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED))
+ timing.flags |= DISPLAY_FLAGS_VSYNC_LOW;
+ timing.pixelclock.typ = panel_info.vl_clk;
+
+ timing.hactive.typ = panel_info.vl_col;
+ timing.hfront_porch.typ = panel_info.vl_right_margin;
+ timing.hback_porch.typ = panel_info.vl_left_margin;
+ timing.hsync_len.typ = panel_info.vl_hsync_len;
+
+ timing.vactive.typ = panel_info.vl_row;
+ timing.vfront_porch.typ = panel_info.vl_clk;
+ timing.vback_porch.typ = panel_info.vl_clk;
+ timing.vsync_len.typ = panel_info.vl_clk;
+
+ atmel_fb_init(panel_info.mmio, &timing, panel_info.vl_bpix,
+ panel_info.vl_tft, panel_info.vl_cont_pol_low,
+ (ulong)lcdbase);
+}
+
ulong calc_fbsize(void)
{
return ((panel_info.vl_col * panel_info.vl_row *
NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
}
+#endif
+
+#ifdef CONFIG_DM_VIDEO
+static int atmel_fb_lcd_probe(struct udevice *dev)
+{
+ struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct atmel_fb_priv *priv = dev_get_priv(dev);
+ struct display_timing *timing = &priv->timing;
+
+ /*
+ * For now some values are hard-coded. We could use the device tree
+ * bindings in simple-framebuffer.txt to specify the format/bpp and
+ * some Atmel-specific binding for tft and cont_pol_low.
+ */
+ atmel_fb_init(ATMEL_BASE_LCDC, timing, VIDEO_BPP16, true, false,
+ uc_plat->base);
+ uc_priv->xsize = timing->hactive.typ;
+ uc_priv->ysize = timing->vactive.typ;
+ uc_priv->bpix = VIDEO_BPP16;
+ video_set_flush_dcache(dev, true);
+ debug("LCD frame buffer at %lx, size %x, %dx%d pixels\n", uc_plat->base,
+ uc_plat->size, uc_priv->xsize, uc_priv->ysize);
+
+ return 0;
+}
+
+static int atmel_fb_of_to_plat(struct udevice *dev)
+{
+ struct atmel_lcd_plat *plat = dev_get_plat(dev);
+ struct atmel_fb_priv *priv = dev_get_priv(dev);
+ struct display_timing *timing = &priv->timing;
+ const void *blob = gd->fdt_blob;
+
+ if (fdtdec_decode_display_timing(blob, dev_of_offset(dev),
+ plat->timing_index, timing)) {
+ debug("%s: Failed to decode display timing\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int atmel_fb_lcd_bind(struct udevice *dev)
+{
+ struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+
+ uc_plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+ (1 << VIDEO_BPP16) / 8;
+ debug("%s: Frame buffer size %x\n", __func__, uc_plat->size);
+
+ return 0;
+}
+
+static const struct udevice_id atmel_fb_lcd_ids[] = {
+ { .compatible = "atmel,at91sam9g45-lcdc" },
+ { }
+};
+
+U_BOOT_DRIVER(atmel_fb) = {
+ .name = "atmel_fb",
+ .id = UCLASS_VIDEO,
+ .of_match = atmel_fb_lcd_ids,
+ .bind = atmel_fb_lcd_bind,
+ .of_to_plat = atmel_fb_of_to_plat,
+ .probe = atmel_fb_lcd_probe,
+ .plat_auto = sizeof(struct atmel_lcd_plat),
+ .priv_auto = sizeof(struct atmel_fb_priv),
+};
+#endif