+// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2015,2016 Freescale Semiconductor, Inc.
*
* FSL USB HOST xHCI Controller
*
* Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <log.h>
#include <usb.h>
-#include <asm-generic/errno.h>
+#include <linux/errno.h>
#include <linux/compat.h>
#include <linux/usb/xhci-fsl.h>
#include <linux/usb/dwc3.h>
-#include "xhci.h"
+#include <usb/xhci.h>
#include <fsl_errata.h>
#include <fsl_usb.h>
+#include <dm.h>
/* Declare global data pointer */
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct fsl_xhci fsl_xhci;
-unsigned long ctr_addr[] = FSL_USB_XHCI_ADDR;
+struct xhci_fsl_priv {
+ struct xhci_ctrl xhci;
+ fdt_addr_t hcd_base;
+ struct fsl_xhci ctx;
+};
__weak int __board_usb_init(int index, enum usb_init_type init)
{
static int erratum_a008751(void)
{
-#if defined(CONFIG_TARGET_LS2080AQDS) || defined(CONFIG_TARGET_LS2080ARDB)
+#if defined(CONFIG_TARGET_LS2080AQDS) || defined(CONFIG_TARGET_LS2080ARDB) ||\
+ defined(CONFIG_TARGET_LS2080AQDS)
u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
writel(SCFG_USB3PRM1CR_INIT, scfg + SCFG_USB3PRM1CR / 4);
return 0;
}
}
+static void fsl_xhci_set_beat_burst_length(struct dwc3 *dwc3_reg)
+{
+ clrsetbits_le32(&dwc3_reg->g_sbuscfg0, USB3_ENABLE_BEAT_BURST_MASK,
+ USB3_ENABLE_BEAT_BURST);
+ setbits_le32(&dwc3_reg->g_sbuscfg1, USB3_SET_BEAT_BURST_LIMIT);
+}
+
static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci)
{
int ret = 0;
/* Set GFLADJ_30MHZ as 20h as per XHCI spec default value */
dwc3_set_fladj(fsl_xhci->dwc3_reg, GFLADJ_30MHZ_DEFAULT);
+ /* Change beat burst and outstanding pipelined transfers requests */
+ fsl_xhci_set_beat_burst_length(fsl_xhci->dwc3_reg);
+
+ /*
+ * A-010151: The dwc3 phy TSMC 28-nm HPM 0.9/1.8 V does not
+ * reliably support Rx Detect in P3 mode(P3 is the default
+ * setting). Therefore, some USB3.0 devices may not be detected
+ * reliably in Super Speed mode. So, USB controller to configure
+ * USB in P2 mode whenever the Receive Detect feature is required.
+ * whenever the Receive Detect feature is required.
+ */
+ if (has_erratum_a010151())
+ clrsetbits_le32(&fsl_xhci->dwc3_reg->g_usb3pipectl[0],
+ DWC3_GUSB3PIPECTL_DISRXDETP3,
+ DWC3_GUSB3PIPECTL_DISRXDETP3);
+
return ret;
}
return 0;
}
-int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
+static int xhci_fsl_probe(struct udevice *dev)
{
- struct fsl_xhci *ctx = &fsl_xhci;
- int ret = 0;
+ struct xhci_fsl_priv *priv = dev_get_priv(dev);
+ struct xhci_hccr *hccr;
+ struct xhci_hcor *hcor;
- ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
- ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
+ int ret = 0;
- ret = board_usb_init(index, USB_INIT_HOST);
- if (ret != 0) {
- puts("Failed to initialize board for USB\n");
- return ret;
+ /*
+ * Get the base address for XHCI controller from the device node
+ */
+ priv->hcd_base = dev_read_addr(dev);
+ if (priv->hcd_base == FDT_ADDR_T_NONE) {
+ debug("Can't get the XHCI register base address\n");
+ return -ENXIO;
}
+ priv->ctx.hcd = (struct xhci_hccr *)priv->hcd_base;
+ priv->ctx.dwc3_reg = (struct dwc3 *)((char *)(priv->hcd_base) +
+ DWC3_REG_OFFSET);
fsl_apply_xhci_errata();
- ret = fsl_xhci_core_init(ctx);
+ ret = fsl_xhci_core_init(&priv->ctx);
if (ret < 0) {
puts("Failed to initialize xhci\n");
return ret;
}
- *hccr = (struct xhci_hccr *)ctx->hcd;
- *hcor = (struct xhci_hcor *)((uintptr_t) *hccr
- + HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+ hccr = (struct xhci_hccr *)(priv->ctx.hcd);
+ hcor = (struct xhci_hcor *)((uintptr_t) hccr
+ + HC_LENGTH(xhci_readl(&hccr->cr_capbase)));
- debug("fsl-xhci: init hccr %lx and hcor %lx hc_length %lx\n",
- (uintptr_t)*hccr, (uintptr_t)*hcor,
- (uintptr_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase)));
+ debug("xhci-fsl: init hccr %lx and hcor %lx hc_length %lx\n",
+ (uintptr_t)hccr, (uintptr_t)hcor,
+ (uintptr_t)HC_LENGTH(xhci_readl(&hccr->cr_capbase)));
- return ret;
+ return xhci_register(dev, hccr, hcor);
}
-void xhci_hcd_stop(int index)
+static int xhci_fsl_remove(struct udevice *dev)
{
- struct fsl_xhci *ctx = &fsl_xhci;
+ struct xhci_fsl_priv *priv = dev_get_priv(dev);
- fsl_xhci_core_exit(ctx);
+ fsl_xhci_core_exit(&priv->ctx);
+
+ return xhci_deregister(dev);
}
+
+static const struct udevice_id xhci_usb_ids[] = {
+ { .compatible = "fsl,layerscape-dwc3", },
+ { .compatible = "fsl,ls1028a-dwc3", },
+ { }
+};
+
+U_BOOT_DRIVER(xhci_fsl) = {
+ .name = "xhci_fsl",
+ .id = UCLASS_USB,
+ .of_match = xhci_usb_ids,
+ .probe = xhci_fsl_probe,
+ .remove = xhci_fsl_remove,
+ .ops = &xhci_usb_ops,
+ .plat_auto = sizeof(struct usb_plat),
+ .priv_auto = sizeof(struct xhci_fsl_priv),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};