Say Y or if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
+config USB_XHCI_DWC3_OF_SIMPLE
+ bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
+ depends on DM_USB
+ default y if DRA7XX
+ help
+ Support USB2/3 functionality in simple SoC integrations with
+ USB controller based on the DesignWare USB3 IP Core.
+
config USB_XHCI_MVEBU
bool "MVEBU USB 3.0 support"
default y
depends on ARCH_MVEBU
+ select DM_REGULATOR
help
Choose this option to add support for USB 3.0 driver on mvebu
SoCs, which includes Armada8K, Armada3700 and other Armada
family SoCs.
+config USB_XHCI_PCI
+ bool "Support for PCI-based xHCI USB controller"
+ depends on DM_USB
+ default y if X86
+ help
+ Enables support for the PCI-based xHCI controller.
+
config USB_XHCI_ROCKCHIP
bool "Support for Rockchip on-chip xHCI USB controller"
depends on ARCH_ROCKCHIP
+ depends on DM_REGULATOR
+ depends on DM_USB
default y
help
Enables support for the on-chip xHCI controller on Rockchip SoCs.
+config USB_XHCI_RCAR
+ bool "Renesas RCar USB 3.0 support"
+ default y
+ depends on ARCH_RMOBILE
+ help
+ Choose this option to add support for USB 3.0 driver on Renesas
+ RCar Gen3 SoCs.
+
+config USB_XHCI_STI
+ bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
+ depends on ARCH_STI
+ default y
+ help
+ Enables support for the on-chip xHCI controller on STMicroelectronics
+ STiH407 family SoCs. This is a driver for the dwc3 to provide the glue logic
+ to configure the controller.
+
config USB_XHCI_ZYNQMP
bool "Support for Xilinx ZynqMP on-chip xHCI USB controller"
depends on ARCH_ZYNQMP
+ depends on DM_USB
help
Enables support for the on-chip xHCI controller on Xilinx ZynqMP SoCs.
+config USB_XHCI_DRA7XX_INDEX
+ int "DRA7XX xHCI USB index"
+ range 0 1
+ default 0
+ depends on DRA7XX
+ help
+ Select the DRA7XX xHCI USB index.
+ Current supported values: 0, 1.
+
+config USB_XHCI_FSL
+ bool "Support for NXP Layerscape on-chip xHCI USB controller"
+ default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
+ depends on !SPL_NO_USB
+ help
+ Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
endif # USB_XHCI_HCD
config USB_EHCI_HCD
bool "EHCI HCD (USB 2.0) support"
+ default y if ARCH_MX5 || ARCH_MX6
select USB_HOST
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
You may want to read <file:Documentation/usb/ehci.txt>.
-config USB_EHCI
- bool
- default USB_EHCI_HCD
- ---help---
- TODO: rename after most boards switch to Kconfig
-
if USB_EHCI_HCD
config USB_EHCI_ATMEL
Enables support for the on-chip EHCI controller on Atmel chips.
config USB_EHCI_MARVELL
- bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
- depends on ARCH_MVEBU
+ bool "Support for Marvell on-chip EHCI USB controller"
+ depends on ARCH_MVEBU || KIRKWOOD || ORION5X
default y
---help---
Enables support for the on-chip EHCI controller on MVEBU SoCs.
---help---
Enables support for the on-chip EHCI controller on i.MX7 SoCs.
+config USB_EHCI_OMAP
+ bool "Support for OMAP3+ on-chip EHCI USB controller"
+ depends on ARCH_OMAP2PLUS
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on OMAP3 and later
+ SoCs.
+
if USB_EHCI_MX7
config MXC_USB_OTG_HACTIVE
bool "Support for Qualcomm on-chip EHCI USB controller"
depends on DM_USB
select USB_ULPI_VIEWPORT
+ select MSM8916_USB_PHY
default n
---help---
Enables support for the on-chip EHCI controller on Qualcomm
Snapdragon SoCs.
- This driver supports combination of Chipidea USB controller
- and Synapsys USB PHY in host mode only.
+
+config USB_EHCI_PCI
+ bool "Support for PCI-based EHCI USB controller"
+ default y if X86
+ help
+ Enables support for the PCI-based EHCI controller.
+
+config USB_EHCI_TEGRA
+ bool "Support for NVIDIA Tegra on-chip EHCI USB controller"
+ depends on TEGRA
+ ---help---
+ Enable support for Tegra on-chip EHCI USB controller
config USB_EHCI_ZYNQ
bool "Support for Xilinx Zynq on-chip EHCI USB controller"
bool "Support for generic EHCI USB controller"
depends on OF_CONTROL
depends on DM_USB
+ default ARCH_SUNXI
default n
---help---
Enables support for generic EHCI controller.
+config USB_EHCI_FSL
+ bool "Support for FSL on-chip EHCI USB controller"
+ default n
+ select CONFIG_EHCI_HCD_INIT_AFTER_RESET
+ ---help---
+ Enables support for the on-chip EHCI controller on FSL chips.
endif # USB_EHCI_HCD
config USB_OHCI_HCD
bool "Support for generic OHCI USB controller"
depends on OF_CONTROL
depends on DM_USB
+ default ARCH_SUNXI
select USB_HOST
---help---
Enables support for generic OHCI controller.
if USB_UHCI_HCD
endif # USB_UHCI_HCD
+
+config USB_DWC2
+ bool "DesignWare USB2 Core support"
+ select USB_HOST
+ ---help---
+ The DesignWare USB 2.0 controller is compliant with the
+ USB-Implementers Forum (USB-IF) USB 2.0 specifications.
+ Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps)
+ operation is compliant to the controller Supplement. If you want to
+ enable this controller in host mode, say Y.
+
+if USB_DWC2
+config USB_DWC2_BUFFER_SIZE
+ int "Data buffer size in kB"
+ default 64
+ ---help---
+ By default 64 kB buffer is used but if amount of RAM avaialble on
+ the target is not enough to accommodate allocation of buffer of
+ that size it is possible to shrink it. Smaller sizes should be fine
+ because larger transactions could be split in smaller ones.
+
+endif # USB_DWC2
projects / platform / kernel / u-boot.git / blobdiff