#include <linux/sched.h>
#include <linux/list.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
"first one fails");
-#ifdef DEBUG
-static inline char *portspeed (int portstatus)
+static inline char *portspeed(int portstatus)
{
if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
return "480 Mb/s";
else
return "12 Mb/s";
}
-#endif
/* Note that hdev or one of its children must be locked! */
static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
}
}
+#ifdef CONFIG_USB_SUSPEND
+
+static void usb_stop_pm(struct usb_device *udev)
+{
+ /* Synchronize with the ksuspend thread to prevent any more
+ * autosuspend requests from being submitted, and decrement
+ * the parent's count of unsuspended children.
+ */
+ usb_pm_lock(udev);
+ if (udev->parent && !udev->discon_suspended)
+ usb_autosuspend_device(udev->parent);
+ usb_pm_unlock(udev);
+
+ /* Stop any autosuspend requests already submitted */
+ cancel_rearming_delayed_work(&udev->autosuspend);
+}
+
+#else
+
+static inline void usb_stop_pm(struct usb_device *udev)
+{ }
+
+#endif
+
/**
* usb_disconnect - disconnect a device (usbcore-internal)
* @pdev: pointer to device being disconnected
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- /* Decrement the parent's count of unsuspended children */
- if (udev->parent) {
- usb_pm_lock(udev);
- if (!udev->discon_suspended)
- usb_autosuspend_device(udev->parent);
- usb_pm_unlock(udev);
- }
+ usb_stop_pm(udev);
put_device(&udev->dev);
}
{
int err;
- /* Lock ourself into memory in order to keep a probe sequence
- * sleeping in a new thread from allowing us to be unloaded.
- */
- if (!try_module_get(THIS_MODULE))
- return -EINVAL;
-
/* Determine quirks */
usb_detect_quirks(udev);
}
#endif
+ /* export the usbdev device-node for libusb */
+ udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
+ (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+
/* Register the device. The device driver is responsible
- * for adding the device files to usbfs and sysfs and for
- * configuring the device.
+ * for adding the device files to sysfs and for configuring
+ * the device.
*/
- err = device_add (&udev->dev);
+ err = device_add(&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
goto fail;
usb_autoresume_device(udev->parent);
exit:
- module_put(THIS_MODULE);
return err;
fail:
usb_lock_device(udev);
if (udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
- status = usb_autoresume_device(udev);
-
- /* Give the interface drivers a chance to do something,
- * then autosuspend the device again. */
- if (status == 0)
- usb_autosuspend_device(udev);
+ usb_mark_last_busy(udev);
+ status = usb_external_resume_device(udev);
}
usb_unlock_device(udev);
return status;
#define hub_resume NULL
#endif
-void usb_resume_root_hub(struct usb_device *hdev)
-{
- struct usb_hub *hub = hdev_to_hub(hdev);
-
- kick_khubd(hub);
-}
-
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
continue;
}
- /* Use a short timeout the first time through,
- * so that recalcitrant full-speed devices with
- * 8- or 16-byte ep0-maxpackets won't slow things
- * down tremendously by NAKing the unexpectedly
- * early status stage. Also, retry on all errors;
- * some devices are flakey.
- * 255 is for WUSB devices, we actually need to use 512.
- * WUSB1.0[4.8.1].
+ /* Retry on all errors; some devices are flakey.
+ * 255 is for WUSB devices, we actually need to use
+ * 512 (WUSB1.0[4.8.1]).
*/
for (j = 0; j < 3; ++j) {
buf->bMaxPacketSize0 = 0;
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
USB_DT_DEVICE << 8, 0,
buf, GET_DESCRIPTOR_BUFSIZE,
- (i ? USB_CTRL_GET_TIMEOUT : 1000));
+ USB_CTRL_GET_TIMEOUT);
switch (buf->bMaxPacketSize0) {
case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
if (portchange & USB_PORT_STAT_C_CONNECTION) {
status = hub_port_debounce(hub, port1);
if (status < 0) {
- dev_err (hub_dev,
- "connect-debounce failed, port %d disabled\n",
- port1);
+ if (printk_ratelimit())
+ dev_err (hub_dev, "connect-debounce failed, "
+ "port %d disabled\n", port1);
goto done;
}
portstatus = status;