. Rolf Offermanns <rof@sysgo.de>
.
. Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
- . Developed by Simple Network Magic Corporation (SNMC)
+ . Developed by Simple Network Magic Corporation (SNMC)
. Copyright (C) 1996 by Erik Stahlman (ES)
.
. This program is free software; you can redistribute it and/or modify
.
. This program is distributed in the hope that it will be useful,
. but WITHOUT ANY WARRANTY; without even the implied warranty of
- . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
. GNU General Public License for more details.
.
. You should have received a copy of the GNU General Public License
. along with this program; if not, write to the Free Software
- . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
.
. Information contained in this file was obtained from the LAN91C111
. manual from SMC. To get a copy, if you really want one, you can find
. EEPROM interface for configuration
.
. Arguments:
- . io = for the base address
+ . io = for the base address
. irq = for the IRQ
.
. author:
- . Erik Stahlman ( erik@vt.edu )
- . Daris A Nevil ( dnevil@snmc.com )
+ . Erik Stahlman ( erik@vt.edu )
+ . Daris A Nevil ( dnevil@snmc.com )
.
.
. Hardware multicast code from Peter Cammaert ( pc@denkart.be )
.
. Sources:
- . o SMSC LAN91C111 databook (www.smsc.com)
- . o smc9194.c by Erik Stahlman
- . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
+ . o SMSC LAN91C111 databook (www.smsc.com)
+ . o smc9194.c by Erik Stahlman
+ . o skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
.
. History:
+ . 06/19/03 Richard Woodruff Made u-boot environment aware and added mac addr checks.
. 10/17/01 Marco Hasewinkel Modify for DNP/1110
- . 07/25/01 Woojung Huh Modify for ADS Bitsy
- . 04/25/01 Daris A Nevil Initial public release through SMSC
- . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
+ . 07/25/01 Woojung Huh Modify for ADS Bitsy
+ . 04/25/01 Daris A Nevil Initial public release through SMSC
+ . 03/16/01 Daris A Nevil Modified smc9194.c for use with LAN91C111
----------------------------------------------------------------------------*/
#include <common.h>
#define NO_AUTOPROBE
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG > 1
static const char version[] =
"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
-
-#define SMC_DEBUG 0
+#endif
/*------------------------------------------------------------------------
.
/*------------------------------------------------------------------------
.
- . The internal workings of the driver. If you are changing anything
+ . The internal workings of the driver. If you are changing anything
. here with the SMC stuff, you should have the datasheet and know
. what you are doing.
.
#define ETH_ZLEN 60
-#ifdef CONFIG_SMC_USE_32_BIT
+#ifdef CONFIG_SMC_USE_32_BIT
#define USE_32_BIT 1
#else
#undef USE_32_BIT
extern int eth_send(volatile void *packet, int length);
-
-
-
/*
. This is called by register_netdev(). It is responsible for
. checking the portlist for the SMC9000 series chipset. If it finds
. The kernel calls this function when someone wants to use the device,
. typically 'ifconfig ethX up'.
*/
-static int smc_open(void);
+static int smc_open(bd_t *bd);
/*
*/
static int smc_rcv(void);
-
+/* See if a MAC address is defined in the current environment. If so use it. If not
+ . print a warning and set the environment and other globals with the default.
+ . If an EEPROM is present it really should be consulted.
+*/
+int smc_get_ethaddr(bd_t *bd);
+int get_rom_mac(char *v_rom_mac);
/*
------------------------------------------------------------
------------------------------------------------------------
*/
-static char smc_mac_addr[] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
+static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
/*
* This function must be called before smc_open() if you want to override
/*
* smc_get_macaddr is no longer used. If you want to override the default
- * mac address, call smc_get_mac_addr as a part of the board initialisation.
+ * mac address, call smc_get_mac_addr as a part of the board initialization.
*/
#if 0
void smc_get_macaddr( byte *addr ) {
/* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
- unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
int i;
- for (i=0; i<6; i++) {
- addr[0] = *(dnp1110_mac+0);
- addr[1] = *(dnp1110_mac+1);
- addr[2] = *(dnp1110_mac+2);
- addr[3] = *(dnp1110_mac+3);
- addr[4] = *(dnp1110_mac+4);
- addr[5] = *(dnp1110_mac+5);
- }
+ for (i=0; i<6; i++) {
+ addr[0] = *(dnp1110_mac+0);
+ addr[1] = *(dnp1110_mac+1);
+ addr[2] = *(dnp1110_mac+2);
+ addr[3] = *(dnp1110_mac+3);
+ addr[4] = *(dnp1110_mac+4);
+ addr[5] = *(dnp1110_mac+5);
+ }
}
#endif /* 0 */
/***********************************************
- * Show available memory *
+ * Show available memory *
***********************************************/
void dump_memory_info(void)
{
- word mem_info;
- word old_bank;
+ word mem_info;
+ word old_bank;
- old_bank = SMC_inw(BANK_SELECT)&0xF;
+ old_bank = SMC_inw(BANK_SELECT)&0xF;
- SMC_SELECT_BANK(0);
- mem_info = SMC_inw( MIR_REG );
- PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);
+ SMC_SELECT_BANK(0);
+ mem_info = SMC_inw( MIR_REG );
+ PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);
- SMC_SELECT_BANK(old_bank);
+ SMC_SELECT_BANK(old_bank);
}
/*
. A rather simple routine to print out a packet for debugging purposes.
#define tx_done(dev) 1
-
/* this does a soft reset on the device */
static void smc_reset( void );
#endif /* !CONFIG_SMC91111_EXT_PHY */
-static int poll4int( byte mask, int timeout ) {
- int tmo = get_timer(0) + timeout * CFG_HZ;
- int is_timeout = 0;
- word old_bank = SMC_inw(BSR_REG);
-
- PRINTK2("Polling...\n");
- SMC_SELECT_BANK(2);
- while((SMC_inw(SMC91111_INT_REG) & mask) == 0)
- {
- if (get_timer(0) >= tmo) {
- is_timeout = 1;
- break;
+static int poll4int (byte mask, int timeout)
+{
+ int tmo = get_timer (0) + timeout * CFG_HZ;
+ int is_timeout = 0;
+ word old_bank = SMC_inw (BSR_REG);
+
+ PRINTK2 ("Polling...\n");
+ SMC_SELECT_BANK (2);
+ while ((SMC_inw (SMC91111_INT_REG) & mask) == 0) {
+ if (get_timer (0) >= tmo) {
+ is_timeout = 1;
+ break;
+ }
}
- }
- /* restore old bank selection */
- SMC_SELECT_BANK(old_bank);
+ /* restore old bank selection */
+ SMC_SELECT_BANK (old_bank);
- if (is_timeout)
- return 1;
- else
- return 0;
+ if (is_timeout)
+ return 1;
+ else
+ return 0;
+}
+
+/* Only one release command at a time, please */
+static inline void smc_wait_mmu_release_complete (void)
+{
+ int count = 0;
+
+ /* assume bank 2 selected */
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+ udelay (1); /* Wait until not busy */
+ if (++count > 200)
+ break;
+ }
}
/*
. Function: smc_reset( void )
. Purpose:
- . This sets the SMC91111 chip to its normal state, hopefully from whatever
- . mess that any other DOS driver has put it in.
+ . This sets the SMC91111 chip to its normal state, hopefully from whatever
+ . mess that any other DOS driver has put it in.
.
. Maybe I should reset more registers to defaults in here? SOFTRST should
. do that for me.
. 5. clear all interrupts
.
*/
-static void smc_reset( void )
+static void smc_reset (void)
{
- PRINTK2("%s:smc_reset\n", SMC_DEV_NAME);
+ PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
/* This resets the registers mostly to defaults, but doesn't
affect EEPROM. That seems unnecessary */
- SMC_SELECT_BANK( 0 );
- SMC_outw( RCR_SOFTRST, RCR_REG );
+ SMC_SELECT_BANK (0);
+ SMC_outw (RCR_SOFTRST, RCR_REG);
/* Setup the Configuration Register */
/* This is necessary because the CONFIG_REG is not affected */
/* by a soft reset */
- SMC_SELECT_BANK( 1 );
+ SMC_SELECT_BANK (1);
#if defined(CONFIG_SMC91111_EXT_PHY)
- SMC_outw( CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
+ SMC_outw (CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
#else
- SMC_outw( CONFIG_DEFAULT, CONFIG_REG);
+ SMC_outw (CONFIG_DEFAULT, CONFIG_REG);
#endif
/* Release from possible power-down state */
/* Configuration register is not affected by Soft Reset */
- SMC_outw( SMC_inw( CONFIG_REG ) | CONFIG_EPH_POWER_EN, CONFIG_REG );
+ SMC_outw (SMC_inw (CONFIG_REG) | CONFIG_EPH_POWER_EN, CONFIG_REG);
- SMC_SELECT_BANK( 0 );
+ SMC_SELECT_BANK (0);
/* this should pause enough for the chip to be happy */
- udelay(10);
+ udelay (10);
/* Disable transmit and receive functionality */
- SMC_outw( RCR_CLEAR, RCR_REG );
- SMC_outw( TCR_CLEAR, TCR_REG );
+ SMC_outw (RCR_CLEAR, RCR_REG);
+ SMC_outw (TCR_CLEAR, TCR_REG);
/* set the control register */
- SMC_SELECT_BANK( 1 );
- SMC_outw( CTL_DEFAULT, CTL_REG );
+ SMC_SELECT_BANK (1);
+ SMC_outw (CTL_DEFAULT, CTL_REG);
/* Reset the MMU */
- SMC_SELECT_BANK( 2 );
- SMC_outw( MC_RESET, MMU_CMD_REG );
- while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
- udelay(1); /* Wait until not busy */
+ SMC_SELECT_BANK (2);
+ smc_wait_mmu_release_complete ();
+ SMC_outw (MC_RESET, MMU_CMD_REG);
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY)
+ udelay (1); /* Wait until not busy */
/* Note: It doesn't seem that waiting for the MMU busy is needed here,
but this is a place where future chipsets _COULD_ break. Be wary
- of issuing another MMU command right after this */
+ of issuing another MMU command right after this */
/* Disable all interrupts */
- SMC_outb( 0, IM_REG );
+ SMC_outb (0, IM_REG);
}
/*
. (1) maybe utilize power down mode.
. Why not yet? Because while the chip will go into power down mode,
. the manual says that it will wake up in response to any I/O requests
- . in the register space. Empirical results do not show this working.
+ . in the register space. Empirical results do not show this working.
*/
static void smc_shutdown()
{
. This sends the actual packet to the SMC9xxx chip.
.
. Algorithm:
- . First, see if a saved_skb is available.
+ . First, see if a saved_skb is available.
. ( this should NOT be called if there is no 'saved_skb'
. Now, find the packet number that the chip allocated
. Point the data pointers at it in memory
. Dump the packet to chip memory
. Check if a last byte is needed ( odd length packet )
. if so, set the control flag right
- . Tell the card to send it
+ . Tell the card to send it
. Enable the transmit interrupt, so I know if it failed
- . Free the kernel data if I actually sent it.
+ . Free the kernel data if I actually sent it.
*/
-static int smc_send_packet(volatile void *packet, int packet_length)
+static int smc_send_packet (volatile void *packet, int packet_length)
{
- byte packet_no;
- unsigned long ioaddr;
- byte * buf;
- int length;
- int numPages;
- int try = 0;
- int time_out;
- byte status;
-
-
- PRINTK3("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+ byte packet_no;
+ unsigned long ioaddr;
+ byte *buf;
+ int length;
+ int numPages;
+ int try = 0;
+ int time_out;
+ byte status;
+ byte saved_pnr;
+ word saved_ptr;
+
+ /* save PTR and PNR registers before manipulation */
+ SMC_SELECT_BANK (2);
+ saved_pnr = SMC_inb( PN_REG );
+ saved_ptr = SMC_inw( PTR_REG );
+
+ PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
/* allocate memory
- ** The MMU wants the number of pages to be the number of 256 bytes
- ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
- **
- ** The 91C111 ignores the size bits, but the code is left intact
- ** for backwards and future compatibility.
- **
- ** Pkt size for allocating is data length +6 (for additional status
- ** words, length and ctl!)
- **
- ** If odd size then last byte is included in this header.
- */
- numPages = ((length & 0xfffe) + 6);
- numPages >>= 8; /* Divide by 256 */
-
- if (numPages > 7 ) {
- printf("%s: Far too big packet error. \n", SMC_DEV_NAME);
+ ** The MMU wants the number of pages to be the number of 256 bytes
+ ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+ **
+ ** The 91C111 ignores the size bits, but the code is left intact
+ ** for backwards and future compatibility.
+ **
+ ** Pkt size for allocating is data length +6 (for additional status
+ ** words, length and ctl!)
+ **
+ ** If odd size then last byte is included in this header.
+ */
+ numPages = ((length & 0xfffe) + 6);
+ numPages >>= 8; /* Divide by 256 */
+
+ if (numPages > 7) {
+ printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
return 0;
}
/* now, try to allocate the memory */
- SMC_SELECT_BANK( 2 );
- SMC_outw( MC_ALLOC | numPages, MMU_CMD_REG );
+ SMC_SELECT_BANK (2);
+ SMC_outw (MC_ALLOC | numPages, MMU_CMD_REG);
+
+ /* FIXME: the ALLOC_INT bit never gets set *
+ * so the following will always give a *
+ * memory allocation error. *
+ * same code works in armboot though *
+ * -ro
+ */
again:
try++;
time_out = MEMORY_WAIT_TIME;
do {
- status = SMC_inb( SMC91111_INT_REG );
- if ( status & IM_ALLOC_INT ) {
+ status = SMC_inb (SMC91111_INT_REG);
+ if (status & IM_ALLOC_INT) {
/* acknowledge the interrupt */
- SMC_outb( IM_ALLOC_INT, SMC91111_INT_REG );
- break;
+ SMC_outb (IM_ALLOC_INT, SMC91111_INT_REG);
+ break;
}
- } while ( -- time_out );
-
- if ( !time_out ) {
- PRINTK2("%s: memory allocation, try %d failed ...\n",
- SMC_DEV_NAME, try);
- if (try < SMC_ALLOC_MAX_TRY)
- goto again;
- else
- return 0;
+ } while (--time_out);
+
+ if (!time_out) {
+ PRINTK2 ("%s: memory allocation, try %d failed ...\n",
+ SMC_DEV_NAME, try);
+ if (try < SMC_ALLOC_MAX_TRY)
+ goto again;
+ else
+ return 0;
}
- PRINTK2("%s: memory allocation, try %d succeeded ...\n",
- SMC_DEV_NAME,
- try);
+ PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
+ SMC_DEV_NAME, try);
/* I can send the packet now.. */
ioaddr = SMC_BASE_ADDRESS;
- buf = (byte *)packet;
+ buf = (byte *) packet;
/* If I get here, I _know_ there is a packet slot waiting for me */
- packet_no = SMC_inb( AR_REG );
- if ( packet_no & AR_FAILED ) {
+ packet_no = SMC_inb (AR_REG);
+ if (packet_no & AR_FAILED) {
/* or isn't there? BAD CHIP! */
- printf("%s: Memory allocation failed. \n",
- SMC_DEV_NAME);
+ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
return 0;
}
/* we have a packet address, so tell the card to use it */
- SMC_outb( packet_no, PN_REG );
+ SMC_outb (packet_no, PN_REG);
+
+ /* do not write new ptr value if Write data fifo not empty */
+ while ( saved_ptr & PTR_NOTEMPTY )
+ printf ("Write data fifo not empty!\n");
/* point to the beginning of the packet */
- SMC_outw( PTR_AUTOINC , PTR_REG );
+ SMC_outw (PTR_AUTOINC, PTR_REG);
- PRINTK3("%s: Trying to xmit packet of length %x\n",
- SMC_DEV_NAME, length);
+ PRINTK3 ("%s: Trying to xmit packet of length %x\n",
+ SMC_DEV_NAME, length);
#if SMC_DEBUG > 2
- printf("Transmitting Packet\n");
- print_packet( buf, length );
+ printf ("Transmitting Packet\n");
+ print_packet (buf, length);
#endif
/* send the packet length ( +6 for status, length and ctl byte )
- and the status word ( set to zeros ) */
+ and the status word ( set to zeros ) */
#ifdef USE_32_BIT
- SMC_outl( (length +6 ) << 16 , SMC91111_DATA_REG );
+ SMC_outl ((length + 6) << 16, SMC91111_DATA_REG);
#else
- SMC_outw( 0, SMC91111_DATA_REG );
- /* send the packet length ( +6 for status words, length, and ctl*/
- SMC_outw( (length+6), SMC91111_DATA_REG );
+ SMC_outw (0, SMC91111_DATA_REG);
+ /* send the packet length ( +6 for status words, length, and ctl */
+ SMC_outw ((length + 6), SMC91111_DATA_REG);
#endif
/* send the actual data
- . I _think_ it's faster to send the longs first, and then
- . mop up by sending the last word. It depends heavily
- . on alignment, at least on the 486. Maybe it would be
- . a good idea to check which is optimal? But that could take
- . almost as much time as is saved?
- */
+ . I _think_ it's faster to send the longs first, and then
+ . mop up by sending the last word. It depends heavily
+ . on alignment, at least on the 486. Maybe it would be
+ . a good idea to check which is optimal? But that could take
+ . almost as much time as is saved?
+ */
#ifdef USE_32_BIT
- SMC_outsl(SMC91111_DATA_REG, buf, length >> 2 );
- if ( length & 0x2 )
- SMC_outw(*((word *)(buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG);
+ SMC_outsl (SMC91111_DATA_REG, buf, length >> 2);
+ if (length & 0x2)
+ SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
+ SMC91111_DATA_REG);
#else
- SMC_outsw(SMC91111_DATA_REG , buf, (length ) >> 1);
+ SMC_outsw (SMC91111_DATA_REG, buf, (length) >> 1);
#endif /* USE_32_BIT */
- /* Send the last byte, if there is one. */
- if ( (length & 1) == 0 ) {
- SMC_outw( 0, SMC91111_DATA_REG );
+ /* Send the last byte, if there is one. */
+ if ((length & 1) == 0) {
+ SMC_outw (0, SMC91111_DATA_REG);
} else {
- SMC_outw( buf[length -1 ] | 0x2000, SMC91111_DATA_REG );
+ SMC_outw (buf[length - 1] | 0x2000, SMC91111_DATA_REG);
}
/* and let the chipset deal with it */
- SMC_outw( MC_ENQUEUE , MMU_CMD_REG );
+ SMC_outw (MC_ENQUEUE, MMU_CMD_REG);
/* poll for TX INT */
- if (poll4int(IM_TX_INT, SMC_TX_TIMEOUT)) {
+ /* if (poll4int (IM_TX_INT, SMC_TX_TIMEOUT)) { */
+ /* poll for TX_EMPTY INT - autorelease enabled */
+ if (poll4int(IM_TX_EMPTY_INT, SMC_TX_TIMEOUT)) {
/* sending failed */
- PRINTK2("%s: TX timeout, sending failed...\n",
- SMC_DEV_NAME);
+ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
/* release packet */
- SMC_outw(MC_FREEPKT, MMU_CMD_REG);
+ /* no need to release, MMU does that now */
+ /* SMC_outw (MC_FREEPKT, MMU_CMD_REG); */
- /* wait for MMU getting ready (low) */
- while (SMC_inw(MMU_CMD_REG) & MC_BUSY)
- {
- udelay(10);
- }
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+ udelay (10);
+ }
- PRINTK2("MMU ready\n");
+ PRINTK2 ("MMU ready\n");
return 0;
} else {
/* ack. int */
- SMC_outw(IM_TX_INT, SMC91111_INT_REG);
- PRINTK2("%s: Sent packet of length %d \n", SMC_DEV_NAME, length);
+ SMC_outb (IM_TX_EMPTY_INT, SMC91111_INT_REG);
+ /* SMC_outb (IM_TX_INT, SMC91111_INT_REG); */
+ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
+ length);
/* release packet */
- SMC_outw(MC_FREEPKT, MMU_CMD_REG);
+ /* no need to release, MMU does that now */
+ /* SMC_outw (MC_FREEPKT, MMU_CMD_REG); */
- /* wait for MMU getting ready (low) */
- while (SMC_inw(MMU_CMD_REG) & MC_BUSY)
- {
- udelay(10);
- }
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (MMU_CMD_REG) & MC_BUSY) {
+ udelay (10);
+ }
- PRINTK2("MMU ready\n");
+ PRINTK2 ("MMU ready\n");
}
+ /* restore previously saved registers */
+ SMC_outb( saved_pnr, PN_REG );
+ SMC_outw( saved_ptr, PTR_REG );
+
return length;
}
* Set up everything, reset the card, etc ..
*
*/
-static int smc_open()
+static int smc_open (bd_t * bd)
{
- int i; /* used to set hw ethernet address */
+ int i, err;
- PRINTK2("%s:smc_open\n", SMC_DEV_NAME);
+ PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
/* reset the hardware */
-
- smc_reset();
- smc_enable();
+ smc_reset ();
+ smc_enable ();
/* Configure the PHY */
#ifndef CONFIG_SMC91111_EXT_PHY
- smc_phy_configure();
+ smc_phy_configure ();
#endif
-
/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
/* SMC_SELECT_BANK(0); */
/* SMC_outw(0, RPC_REG); */
+ SMC_SELECT_BANK (1);
+ err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */
+ if (err < 0) {
+ memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
+ return (-1); /* upper code ignores this, but NOT bi_enetaddr */
+ }
#ifdef USE_32_BIT
- for ( i = 0; i < 6; i += 2 ) {
+ for (i = 0; i < 6; i += 2) {
word address;
- address = smc_mac_addr[ i + 1 ] << 8 ;
- address |= smc_mac_addr[ i ];
- SMC_outw( address, ADDR0_REG + i );
+ address = smc_mac_addr[i + 1] << 8;
+ address |= smc_mac_addr[i];
+ SMC_outw (address, ADDR0_REG + i);
}
#else
- for ( i = 0; i < 6; i ++ )
- SMC_outb( smc_mac_addr[i], ADDR0_REG + i );
+ for (i = 0; i < 6; i++)
+ SMC_outb (smc_mac_addr[i], ADDR0_REG + i);
#endif
return 0;
}
-#if 0 /* dead code? -- wd */
-#ifdef USE_32_BIT
-void
-insl32(r,b,l)
-{
- int __i ;
- dword *__b2;
-
- __b2 = (dword *) b;
- for (__i = 0; __i < l; __i++) {
- *(__b2 + __i) = *(dword *)(r+0x10000300);
- }
-}
-#endif
-#endif
-
/*-------------------------------------------------------------
.
. smc_rcv - receive a packet from the card
*/
static int smc_rcv()
{
- int packet_number;
+ int packet_number;
word status;
word packet_length;
- int is_error = 0;
+ int is_error = 0;
#ifdef USE_32_BIT
dword stat_len;
#endif
-
+ byte saved_pnr;
+ word saved_ptr;
SMC_SELECT_BANK(2);
+ /* save PTR and PTR registers */
+ saved_pnr = SMC_inb( PN_REG );
+ saved_ptr = SMC_inw( PTR_REG );
+
packet_number = SMC_inw( RXFIFO_REG );
if ( packet_number & RXFIFO_REMPTY ) {
status = stat_len & 0xffff;
packet_length = stat_len >> 16;
#else
- status = SMC_inw( SMC91111_DATA_REG );
- packet_length = SMC_inw( SMC91111_DATA_REG );
+ status = SMC_inw( SMC91111_DATA_REG );
+ packet_length = SMC_inw( SMC91111_DATA_REG );
#endif
packet_length &= 0x07ff; /* mask off top bits */
packet_length -= 4; /*4; */
-
/* set odd length for bug in LAN91C111, */
/* which never sets RS_ODDFRAME */
/* TODO ? */
/* QUESTION: Like in the TX routine, do I want
to send the DWORDs or the bytes first, or some
mixture. A mixture might improve already slow PIO
- performance */
+ performance */
SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 );
/* read the left over bytes */
if (packet_length & 3) {
while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
udelay(1); /* Wait until not busy */
+ /* restore saved registers */
+ SMC_outb( saved_pnr, PN_REG );
+ SMC_outw( saved_ptr, PTR_REG );
+
if (!is_error) {
/* Pass the packet up to the protocol layers. */
NetReceive(NetRxPackets[0], packet_length);
}
-
/*----------------------------------------------------
. smc_close
.
. this makes the board clean up everything that it can
- . and not talk to the outside world. Caused by
+ . and not talk to the outside world. Caused by
. an 'ifconfig ethX down'
.
-----------------------------------------------------*/
/*------------------------------------------------------------
. Debugging function for viewing MII Management serial bitstream
.-------------------------------------------------------------*/
-static void smc_dump_mii_stream(byte* bits, int size)
+static void smc_dump_mii_stream (byte * bits, int size)
{
int i;
- printf("BIT#:");
- for (i = 0; i < size; ++i)
- {
- printf("%d", i%10);
- }
+ printf ("BIT#:");
+ for (i = 0; i < size; ++i) {
+ printf ("%d", i % 10);
+ }
- printf("\nMDOE:");
- for (i = 0; i < size; ++i)
- {
+ printf ("\nMDOE:");
+ for (i = 0; i < size; ++i) {
if (bits[i] & MII_MDOE)
- printf("1");
+ printf ("1");
else
- printf("0");
- }
+ printf ("0");
+ }
- printf("\nMDO :");
- for (i = 0; i < size; ++i)
- {
+ printf ("\nMDO :");
+ for (i = 0; i < size; ++i) {
if (bits[i] & MII_MDO)
- printf("1");
+ printf ("1");
else
- printf("0");
- }
+ printf ("0");
+ }
- printf("\nMDI :");
- for (i = 0; i < size; ++i)
- {
+ printf ("\nMDI :");
+ for (i = 0; i < size; ++i) {
if (bits[i] & MII_MDI)
- printf("1");
+ printf ("1");
else
- printf("0");
- }
+ printf ("0");
+ }
- printf("\n");
+ printf ("\n");
}
#endif
. Reads a register from the MII Management serial interface
.-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
-static word smc_read_phy_register(byte phyreg)
+static word smc_read_phy_register (byte phyreg)
{
int oldBank;
int i;
bits[clk_idx++] = MII_MDOE;
/* Output the PHY address, msb first */
- mask = (byte)0x10;
- for (i = 0; i < 5; ++i)
- {
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
if (phyaddr & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
/* Shift to next lowest bit */
mask >>= 1;
- }
+ }
/* Output the phy register number, msb first */
- mask = (byte)0x10;
- for (i = 0; i < 5; ++i)
- {
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
if (phyreg & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
/* Shift to next lowest bit */
mask >>= 1;
- }
+ }
/* Tristate and turnaround (2 bit times) */
bits[clk_idx++] = 0;
bits[clk_idx++] = 0;
/* Save the current bank */
- oldBank = SMC_inw( BANK_SELECT );
+ oldBank = SMC_inw (BANK_SELECT);
/* Select bank 3 */
- SMC_SELECT_BANK( 3 );
+ SMC_SELECT_BANK (3);
/* Get the current MII register value */
- mii_reg = SMC_inw( MII_REG );
+ mii_reg = SMC_inw (MII_REG);
/* Turn off all MII Interface bits */
- mii_reg &= ~(MII_MDOE|MII_MCLK|MII_MDI|MII_MDO);
+ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
/* Clock all 64 cycles */
- for (i = 0; i < sizeof bits; ++i)
- {
+ for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
- SMC_outw( mii_reg | bits[i], MII_REG );
- udelay(SMC_PHY_CLOCK_DELAY);
+ SMC_outw (mii_reg | bits[i], MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
- SMC_outw( mii_reg | bits[i] | MII_MCLK, MII_REG );
- udelay(SMC_PHY_CLOCK_DELAY);
- bits[i] |= SMC_inw( MII_REG ) & MII_MDI;
- }
+ SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+ bits[i] |= SMC_inw (MII_REG) & MII_MDI;
+ }
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
- SMC_outw( mii_reg, MII_REG );
- udelay(SMC_PHY_CLOCK_DELAY);
+ SMC_outw (mii_reg, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
- SMC_SELECT_BANK( oldBank );
+ SMC_SELECT_BANK (oldBank);
/* Recover input data */
phydata = 0;
- for (i = 0; i < 16; ++i)
- {
+ for (i = 0; i < 16; ++i) {
phydata <<= 1;
if (bits[input_idx++] & MII_MDI)
phydata |= 0x0001;
- }
+ }
#if (SMC_DEBUG > 2 )
- printf("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+ printf ("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
phyaddr, phyreg, phydata);
- smc_dump_mii_stream(bits, sizeof bits);
+ smc_dump_mii_stream (bits, sizeof bits);
#endif
- return(phydata);
+ return (phydata);
}
/*------------------------------------------------------------
. Writes a register to the MII Management serial interface
.-------------------------------------------------------------*/
-static void smc_write_phy_register(byte phyreg, word phydata)
+static void smc_write_phy_register (byte phyreg, word phydata)
{
int oldBank;
int i;
bits[clk_idx++] = MII_MDOE | MII_MDO;
/* Output the PHY address, msb first */
- mask = (byte)0x10;
- for (i = 0; i < 5; ++i)
- {
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
if (phyaddr & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
/* Shift to next lowest bit */
mask >>= 1;
- }
+ }
/* Output the phy register number, msb first */
- mask = (byte)0x10;
- for (i = 0; i < 5; ++i)
- {
+ mask = (byte) 0x10;
+ for (i = 0; i < 5; ++i) {
if (phyreg & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
/* Shift to next lowest bit */
mask >>= 1;
- }
+ }
/* Tristate and turnaround (2 bit times) */
bits[clk_idx++] = 0;
/* Write out 16 bits of data, msb first */
mask = 0x8000;
- for (i = 0; i < 16; ++i)
- {
+ for (i = 0; i < 16; ++i) {
if (phydata & mask)
bits[clk_idx++] = MII_MDOE | MII_MDO;
else
/* Shift to next lowest bit */
mask >>= 1;
- }
+ }
/* Final clock bit (tristate) */
bits[clk_idx++] = 0;
/* Save the current bank */
- oldBank = SMC_inw( BANK_SELECT );
+ oldBank = SMC_inw (BANK_SELECT);
/* Select bank 3 */
- SMC_SELECT_BANK( 3 );
+ SMC_SELECT_BANK (3);
/* Get the current MII register value */
- mii_reg = SMC_inw( MII_REG );
+ mii_reg = SMC_inw (MII_REG);
/* Turn off all MII Interface bits */
- mii_reg &= ~(MII_MDOE|MII_MCLK|MII_MDI|MII_MDO);
+ mii_reg &= ~(MII_MDOE | MII_MCLK | MII_MDI | MII_MDO);
/* Clock all cycles */
- for (i = 0; i < sizeof bits; ++i)
- {
+ for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
- SMC_outw( mii_reg | bits[i], MII_REG );
- udelay(SMC_PHY_CLOCK_DELAY);
+ SMC_outw (mii_reg | bits[i], MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
- SMC_outw( mii_reg | bits[i] | MII_MCLK, MII_REG );
- udelay(SMC_PHY_CLOCK_DELAY);
- bits[i] |= SMC_inw( MII_REG ) & MII_MDI;
- }
+ SMC_outw (mii_reg | bits[i] | MII_MCLK, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
+ bits[i] |= SMC_inw (MII_REG) & MII_MDI;
+ }
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
- SMC_outw( mii_reg, MII_REG );
- udelay(SMC_PHY_CLOCK_DELAY);
+ SMC_outw (mii_reg, MII_REG);
+ udelay (SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
- SMC_SELECT_BANK( oldBank );
+ SMC_SELECT_BANK (oldBank);
#if (SMC_DEBUG > 2 )
- printf("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+ printf ("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
phyaddr, phyreg, phydata);
- smc_dump_mii_stream(bits, sizeof bits);
+ smc_dump_mii_stream (bits, sizeof bits);
#endif
}
#endif /* !CONFIG_SMC91111_EXT_PHY */
-
/*------------------------------------------------------------
. Waits the specified number of milliseconds - kernel friendly
.-------------------------------------------------------------*/
#endif /* !CONFIG_SMC91111_EXT_PHY */
-
/*------------------------------------------------------------
. Configures the specified PHY using Autonegotiation. Calls
. smc_phy_fixed() if the user has requested a certain config.
.-------------------------------------------------------------*/
#ifndef CONFIG_SMC91111_EXT_PHY
-static void smc_phy_configure()
+static void smc_phy_configure ()
{
int timeout;
byte phyaddr;
- word my_phy_caps; /* My PHY capabilities */
- word my_ad_caps; /* My Advertised capabilities */
- word status = 0; /*;my status = 0 */
+ word my_phy_caps; /* My PHY capabilities */
+ word my_ad_caps; /* My Advertised capabilities */
+ word status = 0; /*;my status = 0 */
int failed = 0;
- PRINTK3("%s:smc_program_phy()\n", SMC_DEV_NAME);
-
+ PRINTK3 ("%s:smc_program_phy()\n", SMC_DEV_NAME);
/* Get the detected phy address */
phyaddr = SMC_PHY_ADDR;
/* Reset the PHY, setting all other bits to zero */
- smc_write_phy_register(PHY_CNTL_REG, PHY_CNTL_RST);
+ smc_write_phy_register (PHY_CNTL_REG, PHY_CNTL_RST);
/* Wait for the reset to complete, or time out */
- timeout = 6; /* Wait up to 3 seconds */
- while (timeout--)
- {
- if (!(smc_read_phy_register(PHY_CNTL_REG)
- & PHY_CNTL_RST))
- {
+ timeout = 6; /* Wait up to 3 seconds */
+ while (timeout--) {
+ if (!(smc_read_phy_register (PHY_CNTL_REG)
+ & PHY_CNTL_RST)) {
/* reset complete */
break;
- }
-
- smc_wait_ms(500); /* wait 500 millisecs */
}
- if (timeout < 1)
- {
- printf("%s:PHY reset timed out\n", SMC_DEV_NAME);
+ smc_wait_ms (500); /* wait 500 millisecs */
+ }
+
+ if (timeout < 1) {
+ printf ("%s:PHY reset timed out\n", SMC_DEV_NAME);
goto smc_phy_configure_exit;
- }
+ }
/* Read PHY Register 18, Status Output */
/* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */
/* Enable PHY Interrupts (for register 18) */
/* Interrupts listed here are disabled */
- smc_write_phy_register(PHY_INT_REG, 0xffff);
+ smc_write_phy_register (PHY_MASK_REG, 0xffff);
/* Configure the Receive/Phy Control register */
- SMC_SELECT_BANK( 0 );
- SMC_outw( RPC_DEFAULT, RPC_REG );
+ SMC_SELECT_BANK (0);
+ SMC_outw (RPC_DEFAULT, RPC_REG);
/* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
- my_phy_caps = smc_read_phy_register(PHY_STAT_REG);
- my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */
+ my_phy_caps = smc_read_phy_register (PHY_STAT_REG);
+ my_ad_caps = PHY_AD_CSMA; /* I am CSMA capable */
if (my_phy_caps & PHY_STAT_CAP_T4)
my_ad_caps |= PHY_AD_T4;
my_ad_caps |= PHY_AD_10_HDX;
/* Update our Auto-Neg Advertisement Register */
- smc_write_phy_register( PHY_AD_REG, my_ad_caps);
+ smc_write_phy_register (PHY_AD_REG, my_ad_caps);
+
+ /* Read the register back. Without this, it appears that when */
+ /* auto-negotiation is restarted, sometimes it isn't ready and */
+ /* the link does not come up. */
+ smc_read_phy_register(PHY_AD_REG);
- PRINTK2("%s:phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
- PRINTK2("%s:phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
+ PRINTK2 ("%s:phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
+ PRINTK2 ("%s:phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
/* Restart auto-negotiation process in order to advertise my caps */
- smc_write_phy_register( PHY_CNTL_REG,
- PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST );
+ smc_write_phy_register (PHY_CNTL_REG,
+ PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST);
/* Wait for the auto-negotiation to complete. This may take from */
/* 2 to 3 seconds. */
/* Wait for the reset to complete, or time out */
- timeout = 20; /* Wait up to 10 seconds */
- while (timeout--)
- {
- status = smc_read_phy_register( PHY_STAT_REG);
- if (status & PHY_STAT_ANEG_ACK)
- {
+ timeout = 20; /* Wait up to 10 seconds */
+ while (timeout--) {
+ status = smc_read_phy_register (PHY_STAT_REG);
+ if (status & PHY_STAT_ANEG_ACK) {
/* auto-negotiate complete */
break;
- }
+ }
- smc_wait_ms(500); /* wait 500 millisecs */
+ smc_wait_ms (500); /* wait 500 millisecs */
/* Restart auto-negotiation if remote fault */
- if (status & PHY_STAT_REM_FLT)
- {
- printf("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+ if (status & PHY_STAT_REM_FLT) {
+ printf ("%s:PHY remote fault detected\n",
+ SMC_DEV_NAME);
/* Restart auto-negotiation */
- printf("%s:PHY restarting auto-negotiation\n",
+ printf ("%s:PHY restarting auto-negotiation\n",
SMC_DEV_NAME);
- smc_write_phy_register( PHY_CNTL_REG,
- PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST |
- PHY_CNTL_SPEED | PHY_CNTL_DPLX);
- }
+ smc_write_phy_register (PHY_CNTL_REG,
+ PHY_CNTL_ANEG_EN |
+ PHY_CNTL_ANEG_RST |
+ PHY_CNTL_SPEED |
+ PHY_CNTL_DPLX);
}
+ }
- if (timeout < 1)
- {
- printf("%s:PHY auto-negotiate timed out\n",
- SMC_DEV_NAME);
- printf("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+ if (timeout < 1) {
+ printf ("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+ printf ("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
failed = 1;
- }
+ }
/* Fail if we detected an auto-negotiate remote fault */
- if (status & PHY_STAT_REM_FLT)
- {
- printf( "%s:PHY remote fault detected\n", SMC_DEV_NAME);
- printf("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+ if (status & PHY_STAT_REM_FLT) {
+ printf ("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+ printf ("%s:PHY remote fault detected\n", SMC_DEV_NAME);
failed = 1;
- }
+ }
/* Re-Configure the Receive/Phy Control register */
- SMC_outw( RPC_DEFAULT, RPC_REG );
+ SMC_outw (RPC_DEFAULT, RPC_REG);
- smc_phy_configure_exit:
+ smc_phy_configure_exit:
}
#endif /* !CONFIG_SMC91111_EXT_PHY */
#if SMC_DEBUG > 2
static void print_packet( byte * buf, int length )
{
-#if 0
- int i;
- int remainder;
- int lines;
+ int i;
+ int remainder;
+ int lines;
- printf("Packet of length %d \n", length );
+ printf("Packet of length %d \n", length );
#if SMC_DEBUG > 3
- lines = length / 16;
- remainder = length % 16;
-
- for ( i = 0; i < lines ; i ++ ) {
- int cur;
-
- for ( cur = 0; cur < 8; cur ++ ) {
- byte a, b;
-
- a = *(buf ++ );
- b = *(buf ++ );
- printf("%02x%02x ", a, b );
- }
- printf("\n");
- }
- for ( i = 0; i < remainder/2 ; i++ ) {
- byte a, b;
-
- a = *(buf ++ );
- b = *(buf ++ );
- printf("%02x%02x ", a, b );
- }
- printf("\n");
-#endif
+ lines = length / 16;
+ remainder = length % 16;
+
+ for ( i = 0; i < lines ; i ++ ) {
+ int cur;
+
+ for ( cur = 0; cur < 8; cur ++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ printf("%02x%02x ", a, b );
+ }
+ printf("\n");
+ }
+ for ( i = 0; i < remainder/2 ; i++ ) {
+ byte a, b;
+
+ a = *(buf ++ );
+ b = *(buf ++ );
+ printf("%02x%02x ", a, b );
+ }
+ printf("\n");
#endif
}
#endif
int eth_init(bd_t *bd) {
- smc_open();
- return 0;
+ return (smc_open(bd));
}
void eth_halt() {
return smc_send_packet(packet, length);
}
+int smc_get_ethaddr (bd_t * bd)
+{
+ int env_size, rom_valid, env_present = 0, reg;
+ char *s = NULL, *e, *v_mac, es[] = "11:22:33:44:55:66";
+ uchar s_env_mac[64], v_env_mac[6], v_rom_mac[6];
+
+ env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
+ if ((env_size > 0) && (env_size < sizeof (es))) { /* exit if env is bad */
+ printf ("\n*** ERROR: ethaddr is not set properly!!\n");
+ return (-1);
+ }
+
+ if (env_size > 0) {
+ env_present = 1;
+ s = s_env_mac;
+ }
+
+ for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
+ v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */
+
+ if (!env_present) { /* if NO env */
+ if (rom_valid) { /* but ROM is valid */
+ v_mac = v_rom_mac;
+ sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
+ v_mac[0], v_mac[1], v_mac[2], v_mac[3],
+ v_mac[4], v_mac[5]);
+ setenv ("ethaddr", s_env_mac);
+ } else { /* no env, bad ROM */
+ printf ("\n*** ERROR: ethaddr is NOT set !!\n");
+ return (-1);
+ }
+ } else { /* good env, don't care ROM */
+ v_mac = v_env_mac; /* always use a good env over a ROM */
+ }
+
+ if (env_present && rom_valid) { /* if both env and ROM are good */
+ if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
+ printf ("\nWarning: MAC addresses don't match:\n");
+ printf ("\tHW MAC address: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ v_rom_mac[0], v_rom_mac[1],
+ v_rom_mac[2], v_rom_mac[3],
+ v_rom_mac[4], v_rom_mac[5] );
+ printf ("\t\"ethaddr\" value: "
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ v_env_mac[0], v_env_mac[1],
+ v_env_mac[2], v_env_mac[3],
+ v_env_mac[4], v_env_mac[5]) ;
+ debug ("### Set MAC addr from environment\n");
+ }
+ }
+ memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */
+ smc_set_mac_addr (v_mac); /* use old function to update smc default */
+ PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
+ v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
+ return (0);
+}
+
+int get_rom_mac (char *v_rom_mac)
+{
+#ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */
+ char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 };
+
+ memcpy (v_rom_mac, hw_mac_addr, 6);
+ return (1);
+#else
+ int i;
+ SMC_SELECT_BANK (1);
+ for (i=0; i<6; i++)
+ {
+ v_rom_mac[i] = SMC_inb (ADDR0_REG + i);
+ }
+ return (1);
+#endif
+}
#endif /* CONFIG_DRIVER_SMC91111 */