void NS16550_init(NS16550_t com_port, int baud_divisor)
{
-#if (!defined(CONFIG_SYS_NS16550_BROKEN_TEMT))
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+ /*
+ * On some OMAP3 devices when UART3 is configured for boot mode before
+ * SPL starts only THRE bit is set. We have to empty the transmitter
+ * before initialization starts.
+ */
+ if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
+ == UART_LSR_THRE) {
+ serial_out(UART_LCR_DLAB, &com_port->lcr);
+ serial_out(baud_divisor & 0xff, &com_port->dll);
+ serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+ serial_out(UART_LCRVAL, &com_port->lcr);
+ serial_out(0, &com_port->mdr1);
+ }
+#endif
+
while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT))
;
-#endif
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_TI814X)
+#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
+ defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
serial_out(UART_LCRVAL, &com_port->lcr);
#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
- defined(CONFIG_TI814X)
+ defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
-#if defined(CONFIG_APTIX)
- /* /13 mode so Aptix 6MHz can hit 115200 */
- serial_out(3, &com_port->mdr1);
-#else
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
-#endif
#endif /* CONFIG_OMAP */
}