serial: sh: Convert to Kconfig

[platform/kernel/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a753367..a8e9978 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -48,11 +48,11 @@ config CONS_INDEX
        int "UART used for console"
        depends on ARCH_SUNXI
        default 2 if MACH_SUN5I
-       default 5 if MACH_SUN8I
+       default 5 if MACH_SUN8I_A23 || MACH_SUN8I_A33
        default 1
        help
          Configures the console index.
-         For Allwinner SoC., default values are 2 for SUN5I and 5 for SUN8I.
+         For Allwinner SoC., default values are 2 for SUN5I and 5 for A23/A33.
          Otherwise, the index equals 1.
 
 config DM_SERIAL
@@ -64,8 +64,18 @@ config DM_SERIAL
          implements serial_putc() etc. The uclass interface is
          defined in include/serial.h.
 
+config SERIAL_IRQ_BUFFER
+       bool "Enable RX interrupt buffer for serial input"
+       depends on DM_SERIAL
+       default n
+       help
+         Enable RX interrupt buffer support for the serial driver.
+         This enables pasting longer strings, even when the RX FIFO
+         of the UART is not big enough (e.g. 16 bytes on the normal
+         NS16550).
+
 config SPL_DM_SERIAL
-       bool "Enable Driver Model for serial drivers"
+       bool "Enable Driver Model for serial drivers in SPL"
        depends on DM_SERIAL
        default y if SPL && DM_SERIAL
        help
@@ -75,7 +85,7 @@ config SPL_DM_SERIAL
          defined in include/serial.h.
 
 config TPL_DM_SERIAL
-       bool "Enable Driver Model for serial drivers"
+       bool "Enable Driver Model for serial drivers in TPL"
        depends on DM_SERIAL
        default y if TPL && DM_SERIAL
        help
@@ -145,6 +155,14 @@ config DEBUG_UART_ATMEL
          will need to provide parameters to make this work. The driver will
          be available until the real driver-model serial is running.
 
+config DEBUG_UART_BCM6345
+       bool "BCM6345 UART"
+       depends on BCM6345_SERIAL
+       help
+         Select this to enable a debug UART on BCM6345 SoCs. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver model serial is running.
+
 config DEBUG_UART_NS16550
        bool "ns16550"
        help
@@ -240,6 +258,14 @@ config DEBUG_UART_PIC32
          will need to provide parameters to make this work. The driver will
          be available until the real driver model serial is running.
 
+config DEBUG_UART_MXC
+       bool "IMX Serial port"
+       depends on MXC_UART
+       help
+         Select this to enable a debug UART using the serial_mxc driver. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver model serial is running.
+
 config DEBUG_UART_UNIPHIER
        bool "UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
@@ -249,6 +275,13 @@ config DEBUG_UART_UNIPHIER
          driver will be available until the real driver-model serial is
          running.
 
+config DEBUG_UART_OMAP
+       bool "OMAP uart"
+       help
+         Select this to enable a debug UART using the omap ns16550 driver.
+         You will need to provide parameters to make this work. The driver
+         will be available until the real driver model serial is running.
+
 endchoice
 
 config DEBUG_UART_BASE
@@ -350,6 +383,12 @@ config ATMEL_USART
          configured in the device tree, and input clock frequency can
          be got from the clk node.
 
+config BCM6345_SERIAL
+       bool "Support for BCM6345 UART"
+       depends on DM_SERIAL && ARCH_BMIPS
+       help
+         Select this to enable UART on BCM6345 SoCs.
+
 config FSL_LPUART
        bool "Freescale LPUART support"
        help
@@ -425,6 +464,14 @@ config SANDBOX_SERIAL
             -t raw             Raw mode, Ctrl-C is processed by U-Boot
             -t cooked          Cooked mode, Ctrl-C terminates
 
+config SCIF_CONSOLE
+       bool "Renesas SCIF UART support"
+       depends on SH || ARCH_RMOBILE
+       help
+         Select this to enable Renesas SCIF UART. To operate serial ports
+         on systems with RCar or SH SoCs, say Y to this option. If unsure,
+         say N.
+
 config UNIPHIER_SERIAL
        bool "Support for UniPhier on-chip UART"
        depends on ARCH_UNIPHIER
@@ -470,4 +517,64 @@ config STI_ASC_SERIAL
          on STiH410 SoC. This is a basic implementation,  it supports
          following baudrate 9600, 19200, 38400, 57600 and 115200.
 
+config STM32X7_SERIAL
+       bool "STMicroelectronics STM32 SoCs on-chip UART"
+       depends on DM_SERIAL && STM32F7
+       help
+         If you have a machine based on a STM32 F7 you can enable its
+         onboard serial ports, say Y to this option. If unsure, say N.
+
+config MPC8XX_CONS
+       bool "Console driver for MPC8XX"
+       depends on 8xx
+       default y
+
+choice
+       prompt "Console port"
+       default 8xx_CONS_SMC1
+       depends on MPC8XX_CONS
+       help
+         Depending on board, select one serial port
+         (CONFIG_8xx_CONS_SMC1 or CONFIG_8xx_CONS_SMC2)
+
+config 8xx_CONS_SMC1
+       bool "SMC1"
+
+config 8xx_CONS_SMC2
+       bool "SMC2"
+
+endchoice
+
+config SYS_SMC_RXBUFLEN
+       int "Console Rx buffer length"
+       depends on MPC8XX_CONS
+       default 1
+       help
+         With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
+         the maximum receive buffer length for the SMC.
+         This option is actual only for 8xx possible.
+         If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
+         must be defined, to setup the maximum idle timeout for
+         the SMC.
+
+config SYS_MAXIDLE
+       int "maximum idle timeout"
+       depends on MPC8XX_CONS
+       default 0
+
+config SYS_BRGCLK_PRESCALE
+       int "BRG Clock Prescale"
+       depends on MPC8XX_CONS
+       default 1
+
+config SYS_SDSR
+       hex "SDSR Value"
+       depends on MPC8XX_CONS
+       default 0x83
+
+config SYS_SDMR
+       hex "SDMR Value"
+       depends on MPC8XX_CONS
+       default 0
+
 endmenu