start up driver model. The driver will be available until the real
driver model serial is running.
+config DEBUG_UART_SIFIVE
+ bool "SiFive UART"
+ help
+ Select this to enable a debug UART using the serial_sifive driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver-model serial is running.
+
config DEBUG_UART_STM32
bool "STMicroelectronics STM32"
depends on STM32_SERIAL
config DEBUG_UART_SKIP_INIT
bool "Skip UART initialization"
+ depends on DEBUG_UART
help
Select this if the UART you want to use for debug output is already
initialized by the time U-Boot starts its execution.
+config DEBUG_UART_NS16550_CHECK_ENABLED
+ bool "Check if UART is enabled on output"
+ depends on DEBUG_UART
+ depends on DEBUG_UART_NS16550
+ help
+ Select this if puts()/putc() might be called before the debug UART
+ has been initialized. If this is disabled, putc() might sit in a
+ tight loop if it is called before debug_uart_init() has been called.
+
+ Note that this does not work for every ns16550-compatible UART and
+ so has to be enabled carefully or you might notice lost characters.
+
config ALTERA_JTAG_UART
bool "Altera JTAG UART support"
depends on DM_SERIAL
configured in the device tree, and input clock frequency can
be got from the clk node.
+config SPL_UART_CLOCK
+ int "SPL fixed UART input clock"
+ depends on ATMEL_USART && SPL && !SPL_CLK
+ default 132096000 if ARCH_AT91
+ help
+ Provide a fixed clock value as input to the UART controller. This
+ might be needed on platforms which can't enable CONFIG_SPL_CLK
+ because of SPL image size restrictions.
+
config BCM283X_MU_SERIAL
bool "Support for BCM283x Mini-UART"
depends on DM_SERIAL && ARCH_BCM283X
Choose this option to add support for UART driver on the Marvell
Armada 3700 SoC. The base address is configured via DT.
+config MCFUART
+ bool "Freescale ColdFire UART support"
+ help
+ Choose this option to add support for UART driver on the ColdFire
+ SoC's family. The serial communication channel provides a full-duplex
+ asynchronous/synchronous receiver and transmitter deriving an
+ operating frequency from the internal bus clock or an external clock.
+
config MXC_UART
bool "IMX serial port support"
depends on MX5 || MX6
If you have a machine based on a Marvell XScale PXA2xx CPU you
can enable its onboard serial ports by enabling this option.
+config SIFIVE_SERIAL
+ bool "SiFive UART support"
+ depends on DM_SERIAL
+ help
+ This driver supports the SiFive UART. If unsure say N.
+
config STI_ASC_SERIAL
bool "STMicroelectronics on-chip UART"
depends on DM_SERIAL && ARCH_STI