/*
* QLogic Fibre Channel HBA Driver
- * Copyright (c) 2003-2005 QLogic Corporation
+ * Copyright (c) 2003-2008 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#define __QLA_FW_H
#define MBS_CHECKSUM_ERROR 0x4010
+#define MBS_INVALID_PRODUCT_KEY 0x4020
/*
* Firmware Options.
*/
#define FO1_ENABLE_PUREX BIT_10
#define FO1_DISABLE_LED_CTRL BIT_6
+#define FO1_ENABLE_8016 BIT_0
#define FO2_ENABLE_SEL_CLASS2 BIT_5
#define FO3_NO_ABTS_ON_LINKDOWN BIT_14
+#define FO3_HOLD_STS_IOCB BIT_12
/*
* Port Database structure definition for ISP 24xx.
* BIT 10 = Reserved
* BIT 11 = Enable FC-SP Security
* BIT 12 = FC Tape Enable
- * BIT 13-31 = Reserved
+ * BIT 13 = Reserved
+ * BIT 14 = Enable Target PRLI Control
+ * BIT 15-31 = Reserved
*/
uint32_t firmware_options_2;
* BIT 13 = Data Rate bit 0
* BIT 14 = Data Rate bit 1
* BIT 15 = Data Rate bit 2
- * BIT 16-31 = Reserved
+ * BIT 16 = Enable 75 ohm Termination Select
+ * BIT 17-31 = Reserved
*/
uint32_t firmware_options_3;
#define TMF_LUN_RESET BIT_12
#define TMF_CLEAR_TASK_SET BIT_10
#define TMF_ABORT_TASK_SET BIT_9
+#define TMF_DSD_LIST_ENABLE BIT_2
#define TMF_READ_DATA BIT_1
#define TMF_WRITE_DATA BIT_0
#define EST_SOFI3 (1 << 4)
#define EST_SOFI2 (3 << 4)
- uint32_t rx_xchg_address[2]; /* Receive exchange address. */
+ uint32_t rx_xchg_address; /* Receive exchange address. */
uint16_t rx_dsd_count;
uint8_t opcode;
uint16_t control_flags; /* Control flags. */
/* Modifiers. */
+#define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */
#define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */
#define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */
#define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */
uint16_t timeout; /* Command timeout. */
- uint8_t lun[8]; /* FCP LUN (BE). */
+ struct scsi_lun lun; /* FCP LUN (BE). */
uint32_t control_flags; /* Control Flags. */
#define TCF_NOTMCMD_TO_TARGET BIT_31
#define FA_NVRAM_VPD_SIZE 0x200
#define FA_NVRAM_VPD0_ADDR 0x00
#define FA_NVRAM_VPD1_ADDR 0x100
+
+#define FA_BOOT_CODE_ADDR 0x00000
/*
* RISC code begins at offset 512KB
* within flash. Consisting of two
#define FA_RISC_CODE_ADDR 0x20000
#define FA_RISC_CODE_SEGMENTS 2
+#define FA_FW_AREA_ADDR 0x40000
+#define FA_VPD_NVRAM_ADDR 0x48000
+#define FA_FEATURE_ADDR 0x4C000
+#define FA_FLASH_DESCR_ADDR 0x50000
+#define FA_HW_EVENT0_ADDR 0x54000
+#define FA_HW_EVENT1_ADDR 0x54200
+#define FA_HW_EVENT_SIZE 0x200
+#define FA_HW_EVENT_ENTRY_SIZE 4
+/*
+ * Flash Error Log Event Codes.
+ */
+#define HW_EVENT_RESET_ERR 0xF00B
+#define HW_EVENT_ISP_ERR 0xF020
+#define HW_EVENT_PARITY_ERR 0xF022
+#define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023
+#define HW_EVENT_FLASH_FW_ERR 0xF024
+
+#define FA_BOOT_LOG_ADDR 0x58000
+#define FA_FW_DUMP0_ADDR 0x60000
+#define FA_FW_DUMP1_ADDR 0x70000
+
uint32_t flash_data; /* Flash/NVRAM BIOS data. */
uint32_t ctrl_status; /* Control/Status. */
#define HCCRX_CLR_RISC_INT 0xA0000000
uint32_t gpiod; /* GPIO Data register. */
+
/* LED update mask. */
#define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18)
/* Data update mask. */
#define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16)
+ /* Data update mask. */
+#define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
/* LED control mask. */
#define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2)
/* LED bit values. Color names as
uint32_t gpioe; /* GPIO Enable register. */
/* Enable update mask. */
#define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16)
+ /* Enable update mask. */
+#define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
/* Enable. */
#define GPEX_ENABLE (BIT_1|BIT_0)
uint16_t mailbox29;
uint16_t mailbox30;
uint16_t mailbox31;
+
+ uint32_t iobase_window;
+ uint32_t iobase_c4;
+ uint32_t iobase_c8;
+ uint32_t unused_4_1[6]; /* Gap. */
+ uint32_t iobase_q;
+ uint32_t unused_5[2]; /* Gap. */
+ uint32_t iobase_select;
+ uint32_t unused_6[2]; /* Gap. */
+ uint32_t iobase_sdata;
};
+/* Trace Control *************************************************************/
+
+#define TC_AEN_DISABLE 0
+
+#define TC_EFT_ENABLE 4
+#define TC_EFT_DISABLE 5
+
+#define TC_FCE_ENABLE 8
+#define TC_FCE_OPTIONS 0
+#define TC_FCE_DEFAULT_RX_SIZE 2112
+#define TC_FCE_DEFAULT_TX_SIZE 2112
+#define TC_FCE_DISABLE 9
+#define TC_FCE_DISABLE_TRACE BIT_0
+
/* MID Support ***************************************************************/
-#define MAX_MID_VPS 125
+#define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */
+#define MAX_MULTI_ID_FABRIC 256 /* ... */
+
+#define for_each_mapped_vp_idx(_ha, _idx) \
+ for (_idx = find_next_bit((_ha)->vp_idx_map, \
+ (_ha)->max_npiv_vports + 1, 1); \
+ _idx <= (_ha)->max_npiv_vports; \
+ _idx = find_next_bit((_ha)->vp_idx_map, \
+ (_ha)->max_npiv_vports + 1, _idx + 1)) \
struct mid_conf_entry_24xx {
uint16_t reserved_1;
uint16_t count;
uint16_t options;
- struct mid_conf_entry_24xx entries[MAX_MID_VPS];
+ struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
};
uint8_t reserved_1;
};
-struct mid_db_24xx {
- struct mid_db_entry_24xx entries[MAX_MID_VPS];
-};
-
- /*
- * Virtual Fabric ID type definition.
- */
-typedef struct vf_id {
- uint16_t id : 12;
- uint16_t priority : 4;
-} vf_id_t;
-
-/*
- * Virtual Fabric HopCt type definition.
- */
-typedef struct vf_hopct {
- uint16_t reserved : 8;
- uint16_t hopct : 8;
-} vf_hopct_t;
-
/*
* Virtual Port Control IOCB
*/
uint8_t vp_idx_map[16];
uint16_t flags;
- struct vf_id id;
+ uint16_t id;
uint16_t reserved_4;
- struct vf_hopct hopct;
- uint8_t reserved_5[8];
+ uint16_t hopct;
+ uint8_t reserved_5[24];
};
/*
uint16_t reserved_vp2;
uint8_t port_name_idx2[WWN_SIZE];
uint8_t node_name_idx2[WWN_SIZE];
- struct vf_id id;
+ uint16_t id;
uint16_t reserved_4;
- struct vf_hopct hopct;
+ uint16_t hopct;
uint8_t reserved_5;
};
};
/* END MID Support ***********************************************************/
+
+/* Flash Description Table ***************************************************/
+
+struct qla_fdt_layout {
+ uint8_t sig[4];
+ uint16_t version;
+ uint16_t len;
+ uint16_t checksum;
+ uint8_t unused1[2];
+ uint8_t model[16];
+ uint16_t man_id;
+ uint16_t id;
+ uint8_t flags;
+ uint8_t erase_cmd;
+ uint8_t alt_erase_cmd;
+ uint8_t wrt_enable_cmd;
+ uint8_t wrt_enable_bits;
+ uint8_t wrt_sts_reg_cmd;
+ uint8_t unprotect_sec_cmd;
+ uint8_t read_man_id_cmd;
+ uint32_t block_size;
+ uint32_t alt_block_size;
+ uint32_t flash_size;
+ uint32_t wrt_enable_data;
+ uint8_t read_id_addr_len;
+ uint8_t wrt_disable_bits;
+ uint8_t read_dev_id_len;
+ uint8_t chip_erase_cmd;
+ uint16_t read_timeout;
+ uint8_t protect_sec_cmd;
+ uint8_t unused2[65];
+};
+
+/* 84XX Support **************************************************************/
+
+#define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */
+#define A84_PANIC_RECOVERY 0x1
+#define A84_OP_LOGIN_COMPLETE 0x2
+#define A84_DIAG_LOGIN_COMPLETE 0x3
+#define A84_GOLD_LOGIN_COMPLETE 0x4
+
+#define MBC_ISP84XX_RESET 0x3a /* Reset. */
+
+#define FSTATE_REMOTE_FC_DOWN BIT_0
+#define FSTATE_NSL_LINK_DOWN BIT_1
+#define FSTATE_IS_DIAG_FW BIT_2
+#define FSTATE_LOGGED_IN BIT_3
+#define FSTATE_WAITING_FOR_VERIFY BIT_4
+
+#define VERIFY_CHIP_IOCB_TYPE 0x1B
+struct verify_chip_entry_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t options;
+#define VCO_DONT_UPDATE_FW BIT_0
+#define VCO_FORCE_UPDATE BIT_1
+#define VCO_DONT_RESET_UPDATE BIT_2
+#define VCO_DIAG_FW BIT_3
+#define VCO_END_OF_DATA BIT_14
+#define VCO_ENABLE_DSD BIT_15
+
+ uint16_t reserved_1;
+
+ uint16_t data_seg_cnt;
+ uint16_t reserved_2[3];
+
+ uint32_t fw_ver;
+ uint32_t exchange_address;
+
+ uint32_t reserved_3[3];
+ uint32_t fw_size;
+ uint32_t fw_seq_size;
+ uint32_t relative_offset;
+
+ uint32_t dseg_address[2];
+ uint32_t dseg_length;
+};
+
+struct verify_chip_rsp_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t comp_status;
+#define CS_VCS_CHIP_FAILURE 0x3
+#define CS_VCS_BAD_EXCHANGE 0x8
+#define CS_VCS_SEQ_COMPLETEi 0x40
+
+ uint16_t failure_code;
+#define VFC_CHECKSUM_ERROR 0x1
+#define VFC_INVALID_LEN 0x2
+#define VFC_ALREADY_IN_PROGRESS 0x8
+
+ uint16_t reserved_1[4];
+
+ uint32_t fw_ver;
+ uint32_t exchange_address;
+
+ uint32_t reserved_2[6];
+};
+
+#define ACCESS_CHIP_IOCB_TYPE 0x2B
+struct access_chip_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t options;
+#define ACO_DUMP_MEMORY 0x0
+#define ACO_LOAD_MEMORY 0x1
+#define ACO_CHANGE_CONFIG_PARAM 0x2
+#define ACO_REQUEST_INFO 0x3
+
+ uint16_t reserved1;
+
+ uint16_t dseg_count;
+ uint16_t reserved2[3];
+
+ uint32_t parameter1;
+ uint32_t parameter2;
+ uint32_t parameter3;
+
+ uint32_t reserved3[3];
+ uint32_t total_byte_cnt;
+ uint32_t reserved4;
+
+ uint32_t dseg_address[2];
+ uint32_t dseg_length;
+};
+
+struct access_chip_rsp_84xx {
+ uint8_t entry_type;
+ uint8_t entry_count;
+ uint8_t sys_defined;
+ uint8_t entry_status;
+
+ uint32_t handle;
+
+ uint16_t comp_status;
+ uint16_t failure_code;
+ uint32_t residual_count;
+
+ uint32_t reserved[12];
+};
#endif
projects / profile / ivi / kernel-x86-ivi.git / blobdiff