#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/string.h>
#include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/io.h>
+#include <linux/bitops.h>
#include <mach/hardware.h>
#include <asm/irq.h>
+#ifdef CONFIG_ARCH_PXA
+#include <mach/regs-rtc.h>
+#endif
+
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
-#define RTC_FREQ 1024
-
-#define RCNR 0x00 /* RTC Count Register */
-#define RTAR 0x04 /* RTC Alarm Register */
-#define RTSR 0x08 /* RTC Status Register */
-#define RTTR 0x0c /* RTC Timer Trim Register */
-
-#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
-#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
-#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
-#define RTSR_AL (1 << 0) /* RTC alarm detected */
-
-#define rtc_readl(sa1100_rtc, reg) \
- readl_relaxed((sa1100_rtc)->base + (reg))
-#define rtc_writel(sa1100_rtc, reg, value) \
- writel_relaxed((value), (sa1100_rtc)->base + (reg))
-
-struct sa1100_rtc {
- struct resource *ress;
- void __iomem *base;
- struct clk *clk;
- int irq_1Hz;
- int irq_Alrm;
- struct rtc_device *rtc;
- spinlock_t lock; /* Protects this structure */
-};
+
+static const unsigned long RTC_FREQ = 1024;
+static struct rtc_time rtc_alarm;
+static DEFINE_SPINLOCK(sa1100_rtc_lock);
+
/*
* Calculate the next alarm time given the requested alarm time mask
* and the current time.
static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = to_platform_device(dev_id);
- struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
unsigned int rtsr;
unsigned long events = 0;
- spin_lock(&sa1100_rtc->lock);
+ spin_lock(&sa1100_rtc_lock);
+ rtsr = RTSR;
/* clear interrupt sources */
- rtsr = rtc_readl(sa1100_rtc, RTSR);
- rtc_writel(sa1100_rtc, RTSR, 0);
-
+ RTSR = 0;
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_probe(). */
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
/* This is the original code, before there was the if test
* above. This code does not clear interrupts that were not
* enabled. */
- rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
+ RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
} else {
/* For some reason, it is possible to enter this routine
* without interruptions enabled, it has been tested with
* This situation leads to an infinite "loop" of interrupt
* routine calling and as a result the processor seems to
* lock on its first call to open(). */
- rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+ RTSR = RTSR_AL | RTSR_HZ;
}
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
rtsr &= ~RTSR_ALE;
- rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
+ RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
/* update irq data & counter */
if (rtsr & RTSR_AL)
if (rtsr & RTSR_HZ)
events |= RTC_UF | RTC_IRQF;
- rtc_update_irq(sa1100_rtc->rtc, 1, events);
+ rtc_update_irq(rtc, 1, events);
- spin_unlock(&sa1100_rtc->lock);
+ spin_unlock(&sa1100_rtc_lock);
return IRQ_HANDLED;
}
static int sa1100_rtc_open(struct device *dev)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
int ret;
+ struct platform_device *plat_dev = to_platform_device(dev);
+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
- ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
- IRQF_DISABLED, "rtc 1Hz", dev);
+ ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
+ "rtc 1Hz", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
+ dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
goto fail_ui;
}
- ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
- IRQF_DISABLED, "rtc Alrm", dev);
+ ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
+ "rtc Alrm", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
+ dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
goto fail_ai;
}
- sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
- rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
+ rtc->max_user_freq = RTC_FREQ;
+ rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
return 0;
fail_ai:
- free_irq(sa1100_rtc->irq_1Hz, dev);
+ free_irq(IRQ_RTC1Hz, dev);
fail_ui:
return ret;
}
static void sa1100_rtc_release(struct device *dev)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ spin_lock_irq(&sa1100_rtc_lock);
+ RTSR = 0;
+ spin_unlock_irq(&sa1100_rtc_lock);
- spin_lock_irq(&sa1100_rtc->lock);
- rtc_writel(sa1100_rtc, RTSR, 0);
- spin_unlock_irq(&sa1100_rtc->lock);
-
- free_irq(sa1100_rtc->irq_Alrm, dev);
- free_irq(sa1100_rtc->irq_1Hz, dev);
+ free_irq(IRQ_RTCAlrm, dev);
+ free_irq(IRQ_RTC1Hz, dev);
}
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
- unsigned int rtsr;
-
- spin_lock_irq(&sa1100_rtc->lock);
-
- rtsr = rtc_readl(sa1100_rtc, RTSR);
+ spin_lock_irq(&sa1100_rtc_lock);
if (enabled)
- rtsr |= RTSR_ALE;
+ RTSR |= RTSR_ALE;
else
- rtsr &= ~RTSR_ALE;
- rtc_writel(sa1100_rtc, RTSR, rtsr);
-
- spin_unlock_irq(&sa1100_rtc->lock);
+ RTSR &= ~RTSR_ALE;
+ spin_unlock_irq(&sa1100_rtc_lock);
return 0;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
- rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
+ rtc_time_to_tm(RCNR, tm);
return 0;
}
static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
unsigned long time;
int ret;
ret = rtc_tm_to_time(tm, &time);
if (ret == 0)
- rtc_writel(sa1100_rtc, RCNR, time);
+ RCNR = time;
return ret;
}
static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
- unsigned long time;
- unsigned int rtsr;
+ u32 rtsr;
- time = rtc_readl(sa1100_rtc, RCNR);
- rtc_time_to_tm(time, &alrm->time);
- rtsr = rtc_readl(sa1100_rtc, RTSR);
+ memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
+ rtsr = RTSR;
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
return 0;
static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
struct rtc_time now_tm, alarm_tm;
- unsigned long time, alarm;
- unsigned int rtsr;
-
- spin_lock_irq(&sa1100_rtc->lock);
+ int ret;
- time = rtc_readl(sa1100_rtc, RCNR);
- rtc_time_to_tm(time, &now_tm);
- rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
- rtc_tm_to_time(&alarm_tm, &alarm);
- rtc_writel(sa1100_rtc, RTAR, alarm);
+ spin_lock_irq(&sa1100_rtc_lock);
- rtsr = rtc_readl(sa1100_rtc, RTSR);
+ now = RCNR;
+ rtc_time_to_tm(now, &now_tm);
+ rtc_next_alarm_time(&alarm_tm, &now_tm, alrm->time);
+ rtc_tm_to_time(&alarm_tm, &time);
+ RTAR = time;
if (alrm->enabled)
- rtsr |= RTSR_ALE;
+ RTSR |= RTSR_ALE;
else
- rtsr &= ~RTSR_ALE;
- rtc_writel(sa1100_rtc, RTSR, rtsr);
+ RTSR &= ~RTSR_ALE;
- spin_unlock_irq(&sa1100_rtc->lock);
+ spin_unlock_irq(&sa1100_rtc_lock);
- return 0;
+ return ret;
}
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
+ seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
- seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
- rtc_readl(sa1100_rtc, RTTR));
- seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
- rtc_readl(sa1100_rtc, RTSR));
return 0;
}
static int sa1100_rtc_probe(struct platform_device *pdev)
{
- struct sa1100_rtc *sa1100_rtc;
- unsigned int rttr;
- int ret;
-
- sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
- if (!sa1100_rtc)
- return -ENOMEM;
-
- spin_lock_init(&sa1100_rtc->lock);
- platform_set_drvdata(pdev, sa1100_rtc);
-
- ret = -ENXIO;
- sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!sa1100_rtc->ress) {
- dev_err(&pdev->dev, "No I/O memory resource defined\n");
- goto err_ress;
- }
-
- sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
- if (sa1100_rtc->irq_1Hz < 0) {
- dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
- goto err_ress;
- }
- sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
- if (sa1100_rtc->irq_Alrm < 0) {
- dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
- goto err_ress;
- }
-
- ret = -ENOMEM;
- sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
- resource_size(sa1100_rtc->ress));
- if (!sa1100_rtc->base) {
- dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
- goto err_map;
- }
-
- sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(sa1100_rtc->clk)) {
- dev_err(&pdev->dev, "failed to find rtc clock source\n");
- ret = PTR_ERR(sa1100_rtc->clk);
- goto err_clk;
- }
- clk_prepare(sa1100_rtc->clk);
- clk_enable(sa1100_rtc->clk);
+ struct rtc_device *rtc;
/*
* According to the manual we should be able to let RTTR be zero
* If the clock divider is uninitialized then reset it to the
* default value to get the 1Hz clock.
*/
- if (rtc_readl(sa1100_rtc, RTTR) == 0) {
- rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
- rtc_writel(sa1100_rtc, RTTR, rttr);
- dev_warn(&pdev->dev, "warning: initializing default clock"
- " divider/trim value\n");
+ if (RTTR == 0) {
+ RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+ dev_warn(&pdev->dev, "warning: "
+ "initializing default clock divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
- rtc_writel(sa1100_rtc, RCNR, 0);
+ RCNR = 0;
}
device_init_wakeup(&pdev->dev, 1);
- sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
- &sa1100_rtc_ops, THIS_MODULE);
- if (IS_ERR(sa1100_rtc->rtc)) {
- dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
- ret);
- goto err_rtc_reg;
- }
+ rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
+ THIS_MODULE);
+
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ platform_set_drvdata(pdev, rtc);
+
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_interrupt().
*
*
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
* the corresponding bits in RTSR. */
- rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
+ RTSR = RTSR_AL | RTSR_HZ;
return 0;
-
-err_rtc_reg:
-err_clk:
- iounmap(sa1100_rtc->base);
-err_ress:
-err_map:
- kfree(sa1100_rtc);
- return ret;
}
static int sa1100_rtc_remove(struct platform_device *pdev)
{
- struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+ if (rtc)
+ rtc_device_unregister(rtc);
- rtc_device_unregister(sa1100_rtc->rtc);
- clk_disable(sa1100_rtc->clk);
- clk_unprepare(sa1100_rtc->clk);
- iounmap(sa1100_rtc->base);
return 0;
}
#ifdef CONFIG_PM
static int sa1100_rtc_suspend(struct device *dev)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
if (device_may_wakeup(dev))
- enable_irq_wake(sa1100_rtc->irq_Alrm);
+ enable_irq_wake(IRQ_RTCAlrm);
return 0;
}
static int sa1100_rtc_resume(struct device *dev)
{
- struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
-
if (device_may_wakeup(dev))
- disable_irq_wake(sa1100_rtc->irq_Alrm);
+ disable_irq_wake(IRQ_RTCAlrm);
return 0;
}
projects / profile / ivi / kernel-x86-ivi.git / blobdiff