- 'drivers/power/pmic/regulator-uclass.c'
It's important to call the device_bind() with the proper node offset,
when binding the regulator devices. The pmic_bind_childs() can be used
- for this purpose if PMIC I/O driver is implemented or dm_scan_fdt_node()
+ for this purpose if PMIC I/O driver is implemented or dm_scan_fdt_dev()
otherwise. Detailed information can be found in the header file.
config SPL_DM_REGULATOR
features for REGULATOR PFUZE100. The driver implements get/set api for:
value, enable and mode.
+config REGULATOR_PWM
+ bool "Enable driver for PWM regulators"
+ depends on DM_REGULATOR
+ ---help---
+ Enable support for the PWM regulator functions which voltage are
+ controlled by PWM duty ratio. Some of Rockchip board using this kind
+ of regulator. The driver implements get/set api for the various BUCKS.
+ This driver is controlled by a device tree node
+ which includes voltage limits.
+
config DM_REGULATOR_MAX77686
bool "Enable Driver Model for REGULATOR MAX77686"
depends on DM_REGULATOR && DM_PMIC_MAX77686
features for fixed value regulators. The driver implements get/set api
for enable and get only for voltage value.
-config REGULATOR_RK808
- bool "Enable driver for RK808 regulators"
- depends on DM_REGULATOR && PMIC_RK808
+config DM_REGULATOR_GPIO
+ bool "Enable Driver Model for GPIO REGULATOR"
+ depends on DM_REGULATOR
+ ---help---
+ This config enables implementation of driver-model regulator uclass
+ features for gpio regulators. The driver implements get/set for
+ voltage value.
+
+config REGULATOR_RK8XX
+ bool "Enable driver for RK8XX regulators"
+ depends on DM_REGULATOR && PMIC_RK8XX
---help---
- Enable support for the regulator functions of the RK808 PMIC. The
+ Enable support for the regulator functions of the RK8XX PMIC. The
driver implements get/set api for the various BUCKS and LDOs supported
by the PMIC device. This driver is controlled by a device tree node
which includes voltage limits.
regulators, one for each FET. The standard regulator interface is
supported, but it is only possible to turn the regulators on or off.
There is no voltage/current control.
+
+config DM_REGULATOR_PALMAS
+ bool "Enable driver for PALMAS PMIC regulators"
+ depends on PMIC_PALMAS
+ ---help---
+ This enables implementation of driver-model regulator uclass
+ features for REGULATOR PALMAS and the family of PALMAS PMICs.
+ The driver implements get/set api for: value and enable.
+
+config DM_REGULATOR_LP873X
+ bool "Enable driver for LP873X PMIC regulators"
+ depends on PMIC_LP873X
+ ---help---
+ This enables implementation of driver-model regulator uclass
+ features for REGULATOR LP873X and the family of LP873X PMICs.
+ The driver implements get/set api for: value and enable.
+
+config DM_REGULATOR_LP87565
+ bool "Enable driver for LP87565 PMIC regulators"
+ depends on PMIC_LP87565
+ ---help---
+ This enables implementation of driver-model regulator uclass
+ features for REGULATOR LP87565 and the family of LP87565 PMICs.
+ LP87565 series of PMICs have 4 single phase BUCKs that can also
+ be configured in multi phase modes. The driver implements
+ get/set api for value and enable.